diff options
Diffstat (limited to 'drivers/thermal/qcom')
| -rw-r--r-- | drivers/thermal/qcom/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/thermal/qcom/Makefile | 1 | ||||
| -rw-r--r-- | drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 465 |
3 files changed, 477 insertions, 0 deletions
diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig index be32e5abce3c..cdb455ffd575 100644 --- a/drivers/thermal/qcom/Kconfig +++ b/drivers/thermal/qcom/Kconfig @@ -9,3 +9,14 @@ config QCOM_TSENS thermal zone device via the mode file results in disabling the sensor. Also able to set threshold temperature for both hot and cold and update when a threshold is reached. + +config QCOM_SPMI_TEMP_ALARM + tristate "Qualcomm SPMI PMIC Temperature Alarm" + depends on OF && SPMI && IIO + select REGMAP_SPMI + help + This enables a thermal sysfs driver for Qualcomm plug-and-play (QPNP) + PMIC devices. It shows up in sysfs as a thermal sensor with multiple + trip points. The temperature reported by the thermal sensor reflects the + real time die temperature if an ADC is present or an estimate of the + temperature based upon the over temperature stage value. diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile index a821929ede0b..717a08600bb5 100644 --- a/drivers/thermal/qcom/Makefile +++ b/drivers/thermal/qcom/Makefile @@ -1,2 +1,3 @@ obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-v2.o +obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM) += qcom-spmi-temp-alarm.o diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c new file mode 100644 index 000000000000..c1fd71dbab3e --- /dev/null +++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c @@ -0,0 +1,465 @@ +/* + * Copyright (c) 2011-2015, 2017, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/iio/consumer.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/thermal.h> + +#include "../thermal_core.h" + +#define QPNP_TM_REG_TYPE 0x04 +#define QPNP_TM_REG_SUBTYPE 0x05 +#define QPNP_TM_REG_STATUS 0x08 +#define QPNP_TM_REG_SHUTDOWN_CTRL1 0x40 +#define QPNP_TM_REG_ALARM_CTRL 0x46 + +#define QPNP_TM_TYPE 0x09 +#define QPNP_TM_SUBTYPE_GEN1 0x08 +#define QPNP_TM_SUBTYPE_GEN2 0x09 + +#define STATUS_GEN1_STAGE_MASK GENMASK(1, 0) +#define STATUS_GEN2_STATE_MASK GENMASK(6, 4) +#define STATUS_GEN2_STATE_SHIFT 4 + +#define SHUTDOWN_CTRL1_OVERRIDE_S2 BIT(6) +#define SHUTDOWN_CTRL1_THRESHOLD_MASK GENMASK(1, 0) + +#define SHUTDOWN_CTRL1_RATE_25HZ BIT(3) + +#define ALARM_CTRL_FORCE_ENABLE BIT(7) + +/* + * Trip point values based on threshold control + * 0 = {105 C, 125 C, 145 C} + * 1 = {110 C, 130 C, 150 C} + * 2 = {115 C, 135 C, 155 C} + * 3 = {120 C, 140 C, 160 C} +*/ +#define TEMP_STAGE_STEP 20000 /* Stage step: 20.000 C */ +#define TEMP_STAGE_HYSTERESIS 2000 + +#define TEMP_THRESH_MIN 105000 /* Threshold Min: 105 C */ +#define TEMP_THRESH_STEP 5000 /* Threshold step: 5 C */ + +#define THRESH_MIN 0 +#define THRESH_MAX 3 + +/* Stage 2 Threshold Min: 125 C */ +#define STAGE2_THRESHOLD_MIN 125000 +/* Stage 2 Threshold Max: 140 C */ +#define STAGE2_THRESHOLD_MAX 140000 + +/* Temperature in Milli Celsius reported during stage 0 if no ADC is present */ +#define DEFAULT_TEMP 37000 + +struct qpnp_tm_chip { + struct regmap *map; + struct device *dev; + struct thermal_zone_device *tz_dev; + unsigned int subtype; + long temp; + unsigned int thresh; + unsigned int stage; + unsigned int prev_stage; + unsigned int base; + /* protects .thresh, .stage and chip registers */ + struct mutex lock; + bool initialized; + + struct iio_channel *adc; +}; + +/* This array maps from GEN2 alarm state to GEN1 alarm stage */ +static const unsigned int alarm_state_map[8] = {0, 1, 1, 2, 2, 3, 3, 3}; + +static int qpnp_tm_read(struct qpnp_tm_chip *chip, u16 addr, u8 *data) +{ + unsigned int val; + int ret; + + ret = regmap_read(chip->map, chip->base + addr, &val); + if (ret < 0) + return ret; + + *data = val; + return 0; +} + +static int qpnp_tm_write(struct qpnp_tm_chip *chip, u16 addr, u8 data) +{ + return regmap_write(chip->map, chip->base + addr, data); +} + +/** + * qpnp_tm_get_temp_stage() - return over-temperature stage + * @chip: Pointer to the qpnp_tm chip + * + * Return: stage (GEN1) or state (GEN2) on success, or errno on failure. + */ +static int qpnp_tm_get_temp_stage(struct qpnp_tm_chip *chip) +{ + int ret; + u8 reg = 0; + + ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, ®); + if (ret < 0) + return ret; + + if (chip->subtype == QPNP_TM_SUBTYPE_GEN1) + ret = reg & STATUS_GEN1_STAGE_MASK; + else + ret = (reg & STATUS_GEN2_STATE_MASK) >> STATUS_GEN2_STATE_SHIFT; + + return ret; +} + +/* + * This function updates the internal temp value based on the + * current thermal stage and threshold as well as the previous stage + */ +static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip *chip) +{ + unsigned int stage, stage_new, stage_old; + int ret; + + WARN_ON(!mutex_is_locked(&chip->lock)); + + ret = qpnp_tm_get_temp_stage(chip); + if (ret < 0) + return ret; + stage = ret; + + if (chip->subtype == QPNP_TM_SUBTYPE_GEN1) { + stage_new = stage; + stage_old = chip->stage; + } else { + stage_new = alarm_state_map[stage]; + stage_old = alarm_state_map[chip->stage]; + } + + if (stage_new > stage_old) { + /* increasing stage, use lower bound */ + chip->temp = (stage_new - 1) * TEMP_STAGE_STEP + + chip->thresh * TEMP_THRESH_STEP + + TEMP_STAGE_HYSTERESIS + TEMP_THRESH_MIN; + } else if (stage_new < stage_old) { + /* decreasing stage, use upper bound */ + chip->temp = stage_new * TEMP_STAGE_STEP + + chip->thresh * TEMP_THRESH_STEP - + TEMP_STAGE_HYSTERESIS + TEMP_THRESH_MIN; + } + + chip->stage = stage; + + return 0; +} + +static int qpnp_tm_get_temp(void *data, int *temp) +{ + struct qpnp_tm_chip *chip = data; + int ret, mili_celsius; + + if (!temp) + return -EINVAL; + + if (!chip->initialized) { + *temp = DEFAULT_TEMP; + return 0; + } + + if (!chip->adc) { + mutex_lock(&chip->lock); + ret = qpnp_tm_update_temp_no_adc(chip); + mutex_unlock(&chip->lock); + if (ret < 0) + return ret; + } else { + ret = iio_read_channel_processed(chip->adc, &mili_celsius); + if (ret < 0) + return ret; + + chip->temp = mili_celsius; + } + + *temp = chip->temp < 0 ? 0 : chip->temp; + + return 0; +} + +static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip, + int temp) +{ + u8 reg; + bool disable_s2_shutdown = false; + + WARN_ON(!mutex_is_locked(&chip->lock)); + + /* + * Default: S2 and S3 shutdown enabled, thresholds at + * 105C/125C/145C, monitoring at 25Hz + */ + reg = SHUTDOWN_CTRL1_RATE_25HZ; + + if (temp == THERMAL_TEMP_INVALID || + temp < STAGE2_THRESHOLD_MIN) { + chip->thresh = THRESH_MIN; + goto skip; + } + + if (temp <= STAGE2_THRESHOLD_MAX) { + chip->thresh = THRESH_MAX - + ((STAGE2_THRESHOLD_MAX - temp) / + TEMP_THRESH_STEP); + disable_s2_shutdown = true; + } else { + chip->thresh = THRESH_MAX; + + if (chip->adc) + disable_s2_shutdown = true; + else + dev_warn(chip->dev, + "No ADC is configured and critical temperature is above the maximum stage 2 threshold of 140 C! Configuring stage 2 shutdown at 140 C.\n"); + } + +skip: + reg |= chip->thresh; + if (disable_s2_shutdown) + reg |= SHUTDOWN_CTRL1_OVERRIDE_S2; + + return qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg); +} + +static int qpnp_tm_set_trip_temp(void *data, int trip, int temp) +{ + struct qpnp_tm_chip *chip = data; + const struct thermal_trip *trip_points; + int ret; + + trip_points = of_thermal_get_trip_points(chip->tz_dev); + if (!trip_points) + return -EINVAL; + + if (trip_points[trip].type != THERMAL_TRIP_CRITICAL) + return 0; + + mutex_lock(&chip->lock); + ret = qpnp_tm_update_critical_trip_temp(chip, temp); + mutex_unlock(&chip->lock); + + return ret; +} + +static const struct thermal_zone_of_device_ops qpnp_tm_sensor_ops = { + .get_temp = qpnp_tm_get_temp, + .set_trip_temp = qpnp_tm_set_trip_temp, +}; + +static irqreturn_t qpnp_tm_isr(int irq, void *data) +{ + struct qpnp_tm_chip *chip = data; + + thermal_zone_device_update(chip->tz_dev, THERMAL_EVENT_UNSPECIFIED); + + return IRQ_HANDLED; +} + +static int qpnp_tm_get_critical_trip_temp(struct qpnp_tm_chip *chip) +{ + int ntrips; + const struct thermal_trip *trips; + int i; + + ntrips = of_thermal_get_ntrips(chip->tz_dev); + if (ntrips <= 0) + return THERMAL_TEMP_INVALID; + + trips = of_thermal_get_trip_points(chip->tz_dev); + if (!trips) + return THERMAL_TEMP_INVALID; + + for (i = 0; i < ntrips; i++) { + if (of_thermal_is_trip_valid(chip->tz_dev, i) && + trips[i].type == THERMAL_TRIP_CRITICAL) + return trips[i].temperature; + } + + return THERMAL_TEMP_INVALID; +} + +/* + * This function initializes the internal temp value based on only the + * current thermal stage and threshold. Setup threshold control and + * disable shutdown override. + */ +static int qpnp_tm_init(struct qpnp_tm_chip *chip) +{ + unsigned int stage; + int ret; + u8 reg = 0; + int crit_temp; + + mutex_lock(&chip->lock); + + ret = qpnp_tm_read(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, ®); + if (ret < 0) + goto out; + + chip->thresh = reg & SHUTDOWN_CTRL1_THRESHOLD_MASK; + chip->temp = DEFAULT_TEMP; + + ret = qpnp_tm_get_temp_stage(chip); + if (ret < 0) + goto out; + chip->stage = ret; + + stage = chip->subtype == QPNP_TM_SUBTYPE_GEN1 + ? chip->stage : alarm_state_map[chip->stage]; + + if (stage) + chip->temp = chip->thresh * TEMP_THRESH_STEP + + (stage - 1) * TEMP_STAGE_STEP + + TEMP_THRESH_MIN; + + crit_temp = qpnp_tm_get_critical_trip_temp(chip); + ret = qpnp_tm_update_critical_trip_temp(chip, crit_temp); + if (ret < 0) + goto out; + + /* Enable the thermal alarm PMIC module in always-on mode. */ + reg = ALARM_CTRL_FORCE_ENABLE; + ret = qpnp_tm_write(chip, QPNP_TM_REG_ALARM_CTRL, reg); + + chip->initialized = true; + +out: + mutex_unlock(&chip->lock); + return ret; +} + +static int qpnp_tm_probe(struct platform_device *pdev) +{ + struct qpnp_tm_chip *chip; + struct device_node *node; + u8 type, subtype; + u32 res; + int ret, irq; + + node = pdev->dev.of_node; + + chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + dev_set_drvdata(&pdev->dev, chip); + chip->dev = &pdev->dev; + + mutex_init(&chip->lock); + + chip->map = dev_get_regmap(pdev->dev.parent, NULL); + if (!chip->map) + return -ENXIO; + + ret = of_property_read_u32(node, "reg", &res); + if (ret < 0) + return ret; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + /* ADC based measurements are optional */ + chip->adc = devm_iio_channel_get(&pdev->dev, "thermal"); + if (IS_ERR(chip->adc)) { + ret = PTR_ERR(chip->adc); + chip->adc = NULL; + if (ret == -EPROBE_DEFER) + return ret; + } + + chip->base = res; + + ret = qpnp_tm_read(chip, QPNP_TM_REG_TYPE, &type); + if (ret < 0) { + dev_err(&pdev->dev, "could not read type\n"); + return ret; + } + + ret = qpnp_tm_read(chip, QPNP_TM_REG_SUBTYPE, &subtype); + if (ret < 0) { + dev_err(&pdev->dev, "could not read subtype\n"); + return ret; + } + + if (type != QPNP_TM_TYPE || (subtype != QPNP_TM_SUBTYPE_GEN1 + && subtype != QPNP_TM_SUBTYPE_GEN2)) { + dev_err(&pdev->dev, "invalid type 0x%02x or subtype 0x%02x\n", + type, subtype); + return -ENODEV; + } + + chip->subtype = subtype; + + /* + * Register the sensor before initializing the hardware to be able to + * read the trip points. get_temp() returns the default temperature + * before the hardware initialization is completed. + */ + chip->tz_dev = devm_thermal_zone_of_sensor_register( + &pdev->dev, 0, chip, &qpnp_tm_sensor_ops); + if (IS_ERR(chip->tz_dev)) { + dev_err(&pdev->dev, "failed to register sensor\n"); + return PTR_ERR(chip->tz_dev); + } + + ret = qpnp_tm_init(chip); + if (ret < 0) { + dev_err(&pdev->dev, "init failed\n"); + return ret; + } + + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, qpnp_tm_isr, + IRQF_ONESHOT, node->name, chip); + if (ret < 0) + return ret; + + thermal_zone_device_update(chip->tz_dev, THERMAL_EVENT_UNSPECIFIED); + + return 0; +} + +static const struct of_device_id qpnp_tm_match_table[] = { + { .compatible = "qcom,spmi-temp-alarm" }, + { } +}; +MODULE_DEVICE_TABLE(of, qpnp_tm_match_table); + +static struct platform_driver qpnp_tm_driver = { + .driver = { + .name = "spmi-temp-alarm", + .of_match_table = qpnp_tm_match_table, + }, + .probe = qpnp_tm_probe, +}; +module_platform_driver(qpnp_tm_driver); + +MODULE_ALIAS("platform:spmi-temp-alarm"); +MODULE_DESCRIPTION("QPNP PMIC Temperature Alarm driver"); +MODULE_LICENSE("GPL v2"); |