summaryrefslogtreecommitdiffstats
path: root/drivers/tc/zs.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tc/zs.c')
-rw-r--r--drivers/tc/zs.c32
1 files changed, 6 insertions, 26 deletions
diff --git a/drivers/tc/zs.c b/drivers/tc/zs.c
index 6bed8713897e..c52af73a251b 100644
--- a/drivers/tc/zs.c
+++ b/drivers/tc/zs.c
@@ -65,14 +65,14 @@
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/bootinfo.h>
-#include <asm/dec/serial.h>
-#ifdef CONFIG_MACH_DECSTATION
#include <asm/dec/interrupts.h>
+#include <asm/dec/ioasic_addrs.h>
#include <asm/dec/machtype.h>
+#include <asm/dec/serial.h>
+#include <asm/dec/system.h>
#include <asm/dec/tc.h>
-#include <asm/dec/ioasic_addrs.h>
-#endif
+
#ifdef CONFIG_KGDB
#include <asm/kgdb.h>
#endif
@@ -192,18 +192,6 @@ static void probe_sccs(void);
static void change_speed(struct dec_serial *info);
static void rs_wait_until_sent(struct tty_struct *tty, int timeout);
-/*
- * tmp_buf is used as a temporary buffer by serial_write. We need to
- * lock it in case the copy_from_user blocks while swapping in a page,
- * and some other program tries to do a serial write at the same time.
- * Since the lock will only come under contention when the system is
- * swapping and available memory is low, it makes sense to share one
- * buffer across all the serial ports, since it significantly saves
- * memory if large numbers of serial ports are open.
- */
-static unsigned char tmp_buf[4096]; /* This is cheating */
-static DECLARE_MUTEX(tmp_buf_sem);
-
static inline int serial_paranoia_check(struct dec_serial *info,
char *name, const char *routine)
{
@@ -1628,30 +1616,22 @@ static void __init probe_sccs(void)
return;
}
- /*
- * When serial console is activated, tc_init has not been called yet
- * and system_base is undefined. Unfortunately we have to hardcode
- * system_base for this case :-(. HK
- */
switch(mips_machtype) {
#ifdef CONFIG_MACH_DECSTATION
case MACH_DS5000_2X0:
case MACH_DS5900:
- system_base = KSEG1ADDR(0x1f800000);
n_chips = 2;
zs_parms = &ds_parms;
zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0];
zs_parms->irq1 = dec_interrupt[DEC_IRQ_SCC1];
break;
case MACH_DS5000_1XX:
- system_base = KSEG1ADDR(0x1c000000);
n_chips = 2;
zs_parms = &ds_parms;
zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0];
zs_parms->irq1 = dec_interrupt[DEC_IRQ_SCC1];
break;
case MACH_DS5000_XX:
- system_base = KSEG1ADDR(0x1c000000);
n_chips = 1;
zs_parms = &ds_parms;
zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0];
@@ -1673,10 +1653,10 @@ static void __init probe_sccs(void)
* The sccs reside on the high byte of the 16 bit IOBUS
*/
zs_channels[n_channels].control =
- (volatile unsigned char *)system_base +
+ (volatile void *)CKSEG1ADDR(dec_kn_slot_base +
(0 == chip ? zs_parms->scc0 : zs_parms->scc1) +
(0 == channel ? zs_parms->channel_a_offset :
- zs_parms->channel_b_offset);
+ zs_parms->channel_b_offset));
zs_channels[n_channels].data =
zs_channels[n_channels].control + 4;