diff options
Diffstat (limited to 'drivers/target/target_core_xcopy.c')
-rw-r--r-- | drivers/target/target_core_xcopy.c | 157 |
1 files changed, 106 insertions, 51 deletions
diff --git a/drivers/target/target_core_xcopy.c b/drivers/target/target_core_xcopy.c index 37d5caebffa6..d828b3b5000b 100644 --- a/drivers/target/target_core_xcopy.c +++ b/drivers/target/target_core_xcopy.c @@ -53,18 +53,13 @@ static int target_xcopy_gen_naa_ieee(struct se_device *dev, unsigned char *buf) return 0; } -static int target_xcopy_locate_se_dev_e4(struct se_cmd *se_cmd, struct xcopy_op *xop, - bool src) +static int target_xcopy_locate_se_dev_e4(const unsigned char *dev_wwn, + struct se_device **found_dev) { struct se_device *se_dev; - unsigned char tmp_dev_wwn[XCOPY_NAA_IEEE_REGEX_LEN], *dev_wwn; + unsigned char tmp_dev_wwn[XCOPY_NAA_IEEE_REGEX_LEN]; int rc; - if (src) - dev_wwn = &xop->dst_tid_wwn[0]; - else - dev_wwn = &xop->src_tid_wwn[0]; - mutex_lock(&g_device_mutex); list_for_each_entry(se_dev, &g_device_list, g_dev_node) { @@ -78,15 +73,8 @@ static int target_xcopy_locate_se_dev_e4(struct se_cmd *se_cmd, struct xcopy_op if (rc != 0) continue; - if (src) { - xop->dst_dev = se_dev; - pr_debug("XCOPY 0xe4: Setting xop->dst_dev: %p from located" - " se_dev\n", xop->dst_dev); - } else { - xop->src_dev = se_dev; - pr_debug("XCOPY 0xe4: Setting xop->src_dev: %p from located" - " se_dev\n", xop->src_dev); - } + *found_dev = se_dev; + pr_debug("XCOPY 0xe4: located se_dev: %p\n", se_dev); rc = target_depend_item(&se_dev->dev_group.cg_item); if (rc != 0) { @@ -110,7 +98,7 @@ static int target_xcopy_locate_se_dev_e4(struct se_cmd *se_cmd, struct xcopy_op } static int target_xcopy_parse_tiddesc_e4(struct se_cmd *se_cmd, struct xcopy_op *xop, - unsigned char *p, bool src) + unsigned char *p, unsigned short cscd_index) { unsigned char *desc = p; unsigned short ript; @@ -155,7 +143,13 @@ static int target_xcopy_parse_tiddesc_e4(struct se_cmd *se_cmd, struct xcopy_op return -EINVAL; } - if (src) { + if (cscd_index != xop->stdi && cscd_index != xop->dtdi) { + pr_debug("XCOPY 0xe4: ignoring CSCD entry %d - neither src nor " + "dest\n", cscd_index); + return 0; + } + + if (cscd_index == xop->stdi) { memcpy(&xop->src_tid_wwn[0], &desc[8], XCOPY_NAA_IEEE_REGEX_LEN); /* * Determine if the source designator matches the local device @@ -167,10 +161,15 @@ static int target_xcopy_parse_tiddesc_e4(struct se_cmd *se_cmd, struct xcopy_op pr_debug("XCOPY 0xe4: Set xop->src_dev %p from source" " received xop\n", xop->src_dev); } - } else { + } + + if (cscd_index == xop->dtdi) { memcpy(&xop->dst_tid_wwn[0], &desc[8], XCOPY_NAA_IEEE_REGEX_LEN); /* - * Determine if the destination designator matches the local device + * Determine if the destination designator matches the local + * device. If @cscd_index corresponds to both source (stdi) and + * destination (dtdi), or dtdi comes after stdi, then + * XCOL_DEST_RECV_OP wins. */ if (!memcmp(&xop->local_dev_wwn[0], &xop->dst_tid_wwn[0], XCOPY_NAA_IEEE_REGEX_LEN)) { @@ -190,20 +189,23 @@ static int target_xcopy_parse_target_descriptors(struct se_cmd *se_cmd, { struct se_device *local_dev = se_cmd->se_dev; unsigned char *desc = p; - int offset = tdll % XCOPY_TARGET_DESC_LEN, rc, ret = 0; + int offset = tdll % XCOPY_TARGET_DESC_LEN, rc; + unsigned short cscd_index = 0; unsigned short start = 0; - bool src = true; *sense_ret = TCM_INVALID_PARAMETER_LIST; if (offset != 0) { pr_err("XCOPY target descriptor list length is not" " multiple of %d\n", XCOPY_TARGET_DESC_LEN); + *sense_ret = TCM_UNSUPPORTED_TARGET_DESC_TYPE_CODE; return -EINVAL; } - if (tdll > 64) { + if (tdll > RCR_OP_MAX_TARGET_DESC_COUNT * XCOPY_TARGET_DESC_LEN) { pr_err("XCOPY target descriptor supports a maximum" " two src/dest descriptors, tdll: %hu too large..\n", tdll); + /* spc4r37 6.4.3.4 CSCD DESCRIPTOR LIST LENGTH field */ + *sense_ret = TCM_TOO_MANY_TARGET_DESCS; return -EINVAL; } /* @@ -215,37 +217,43 @@ static int target_xcopy_parse_target_descriptors(struct se_cmd *se_cmd, while (start < tdll) { /* - * Check target descriptor identification with 0xE4 type with - * use VPD 0x83 WWPN matching .. + * Check target descriptor identification with 0xE4 type, and + * compare the current index with the CSCD descriptor IDs in + * the segment descriptor. Use VPD 0x83 WWPN matching .. */ switch (desc[0]) { case 0xe4: rc = target_xcopy_parse_tiddesc_e4(se_cmd, xop, - &desc[0], src); + &desc[0], cscd_index); if (rc != 0) goto out; - /* - * Assume target descriptors are in source -> destination order.. - */ - if (src) - src = false; - else - src = true; start += XCOPY_TARGET_DESC_LEN; desc += XCOPY_TARGET_DESC_LEN; - ret++; + cscd_index++; break; default: pr_err("XCOPY unsupported descriptor type code:" " 0x%02x\n", desc[0]); + *sense_ret = TCM_UNSUPPORTED_TARGET_DESC_TYPE_CODE; goto out; } } - if (xop->op_origin == XCOL_SOURCE_RECV_OP) - rc = target_xcopy_locate_se_dev_e4(se_cmd, xop, true); - else - rc = target_xcopy_locate_se_dev_e4(se_cmd, xop, false); + switch (xop->op_origin) { + case XCOL_SOURCE_RECV_OP: + rc = target_xcopy_locate_se_dev_e4(xop->dst_tid_wwn, + &xop->dst_dev); + break; + case XCOL_DEST_RECV_OP: + rc = target_xcopy_locate_se_dev_e4(xop->src_tid_wwn, + &xop->src_dev); + break; + default: + pr_err("XCOPY CSCD descriptor IDs not found in CSCD list - " + "stdi: %hu dtdi: %hu\n", xop->stdi, xop->dtdi); + rc = -EINVAL; + break; + } /* * If a matching IEEE NAA 0x83 descriptor for the requested device * is not located on this node, return COPY_ABORTED with ASQ/ASQC @@ -262,7 +270,7 @@ static int target_xcopy_parse_target_descriptors(struct se_cmd *se_cmd, pr_debug("XCOPY TGT desc: Dest dev: %p NAA IEEE WWN: 0x%16phN\n", xop->dst_dev, &xop->dst_tid_wwn[0]); - return ret; + return cscd_index; out: return -EINVAL; @@ -284,6 +292,14 @@ static int target_xcopy_parse_segdesc_02(struct se_cmd *se_cmd, struct xcopy_op xop->stdi = get_unaligned_be16(&desc[4]); xop->dtdi = get_unaligned_be16(&desc[6]); + + if (xop->stdi > XCOPY_CSCD_DESC_ID_LIST_OFF_MAX || + xop->dtdi > XCOPY_CSCD_DESC_ID_LIST_OFF_MAX) { + pr_err("XCOPY segment desc 0x02: unsupported CSCD ID > 0x%x; stdi: %hu dtdi: %hu\n", + XCOPY_CSCD_DESC_ID_LIST_OFF_MAX, xop->stdi, xop->dtdi); + return -EINVAL; + } + pr_debug("XCOPY seg desc 0x02: desc_len: %hu stdi: %hu dtdi: %hu, DC: %d\n", desc_len, xop->stdi, xop->dtdi, dc); @@ -306,15 +322,25 @@ static int target_xcopy_parse_segdesc_02(struct se_cmd *se_cmd, struct xcopy_op static int target_xcopy_parse_segment_descriptors(struct se_cmd *se_cmd, struct xcopy_op *xop, unsigned char *p, - unsigned int sdll) + unsigned int sdll, sense_reason_t *sense_ret) { unsigned char *desc = p; unsigned int start = 0; int offset = sdll % XCOPY_SEGMENT_DESC_LEN, rc, ret = 0; + *sense_ret = TCM_INVALID_PARAMETER_LIST; + if (offset != 0) { pr_err("XCOPY segment descriptor list length is not" " multiple of %d\n", XCOPY_SEGMENT_DESC_LEN); + *sense_ret = TCM_UNSUPPORTED_SEGMENT_DESC_TYPE_CODE; + return -EINVAL; + } + if (sdll > RCR_OP_MAX_SG_DESC_COUNT * XCOPY_SEGMENT_DESC_LEN) { + pr_err("XCOPY supports %u segment descriptor(s), sdll: %u too" + " large..\n", RCR_OP_MAX_SG_DESC_COUNT, sdll); + /* spc4r37 6.4.3.5 SEGMENT DESCRIPTOR LIST LENGTH field */ + *sense_ret = TCM_TOO_MANY_SEGMENT_DESCS; return -EINVAL; } @@ -335,6 +361,7 @@ static int target_xcopy_parse_segment_descriptors(struct se_cmd *se_cmd, default: pr_err("XCOPY unsupported segment descriptor" "type: 0x%02x\n", desc[0]); + *sense_ret = TCM_UNSUPPORTED_SEGMENT_DESC_TYPE_CODE; goto out; } } @@ -861,6 +888,16 @@ sense_reason_t target_do_xcopy(struct se_cmd *se_cmd) return TCM_UNSUPPORTED_SCSI_OPCODE; } + if (se_cmd->data_length == 0) { + target_complete_cmd(se_cmd, SAM_STAT_GOOD); + return TCM_NO_SENSE; + } + if (se_cmd->data_length < XCOPY_HDR_LEN) { + pr_err("XCOPY parameter truncation: length %u < hdr_len %u\n", + se_cmd->data_length, XCOPY_HDR_LEN); + return TCM_PARAMETER_LIST_LENGTH_ERROR; + } + xop = kzalloc(sizeof(struct xcopy_op), GFP_KERNEL); if (!xop) { pr_err("Unable to allocate xcopy_op\n"); @@ -883,6 +920,12 @@ sense_reason_t target_do_xcopy(struct se_cmd *se_cmd) */ tdll = get_unaligned_be16(&p[2]); sdll = get_unaligned_be32(&p[8]); + if (tdll + sdll > RCR_OP_MAX_DESC_LIST_LEN) { + pr_err("XCOPY descriptor list length %u exceeds maximum %u\n", + tdll + sdll, RCR_OP_MAX_DESC_LIST_LEN); + ret = TCM_PARAMETER_LIST_LENGTH_ERROR; + goto out; + } inline_dl = get_unaligned_be32(&p[12]); if (inline_dl != 0) { @@ -890,10 +933,32 @@ sense_reason_t target_do_xcopy(struct se_cmd *se_cmd) goto out; } + if (se_cmd->data_length < (XCOPY_HDR_LEN + tdll + sdll + inline_dl)) { + pr_err("XCOPY parameter truncation: data length %u too small " + "for tdll: %hu sdll: %u inline_dl: %u\n", + se_cmd->data_length, tdll, sdll, inline_dl); + ret = TCM_PARAMETER_LIST_LENGTH_ERROR; + goto out; + } + pr_debug("Processing XCOPY with list_id: 0x%02x list_id_usage: 0x%02x" " tdll: %hu sdll: %u inline_dl: %u\n", list_id, list_id_usage, tdll, sdll, inline_dl); + /* + * skip over the target descriptors until segment descriptors + * have been passed - CSCD ids are needed to determine src and dest. + */ + seg_desc = &p[16] + tdll; + + rc = target_xcopy_parse_segment_descriptors(se_cmd, xop, seg_desc, + sdll, &ret); + if (rc <= 0) + goto out; + + pr_debug("XCOPY: Processed %d segment descriptors, length: %u\n", rc, + rc * XCOPY_SEGMENT_DESC_LEN); + rc = target_xcopy_parse_target_descriptors(se_cmd, xop, &p[16], tdll, &ret); if (rc <= 0) goto out; @@ -911,18 +976,8 @@ sense_reason_t target_do_xcopy(struct se_cmd *se_cmd) pr_debug("XCOPY: Processed %d target descriptors, length: %u\n", rc, rc * XCOPY_TARGET_DESC_LEN); - seg_desc = &p[16]; - seg_desc += (rc * XCOPY_TARGET_DESC_LEN); - - rc = target_xcopy_parse_segment_descriptors(se_cmd, xop, seg_desc, sdll); - if (rc <= 0) { - xcopy_pt_undepend_remotedev(xop); - goto out; - } transport_kunmap_data_sg(se_cmd); - pr_debug("XCOPY: Processed %d segment descriptors, length: %u\n", rc, - rc * XCOPY_SEGMENT_DESC_LEN); INIT_WORK(&xop->xop_work, target_xcopy_do_work); queue_work(xcopy_wq, &xop->xop_work); return TCM_NO_SENSE; |