summaryrefslogtreecommitdiffstats
path: root/drivers/staging
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/staging')
-rw-r--r--drivers/staging/brcm80211/Kconfig2
-rw-r--r--drivers/staging/comedi/Kconfig22
-rw-r--r--drivers/staging/iio/Kconfig2
-rw-r--r--drivers/staging/iio/accel/adis16201.h2
-rw-r--r--drivers/staging/iio/accel/adis16203.h2
-rw-r--r--drivers/staging/iio/accel/adis16204.h2
-rw-r--r--drivers/staging/iio/accel/adis16209.h4
-rw-r--r--drivers/staging/iio/gyro/adis16260.h2
-rw-r--r--drivers/staging/iio/imu/adis16400.h2
-rw-r--r--drivers/staging/lirc/lirc_imon.c10
-rw-r--r--drivers/staging/lirc/lirc_serial.c44
-rw-r--r--drivers/staging/lirc/lirc_sir.c11
-rw-r--r--drivers/staging/lirc/lirc_zilog.c4
-rw-r--r--drivers/staging/mei/init.c2
-rw-r--r--drivers/staging/mei/wd.c13
15 files changed, 68 insertions, 56 deletions
diff --git a/drivers/staging/brcm80211/Kconfig b/drivers/staging/brcm80211/Kconfig
index f4cf9b23481e..379cf16e89f7 100644
--- a/drivers/staging/brcm80211/Kconfig
+++ b/drivers/staging/brcm80211/Kconfig
@@ -7,6 +7,7 @@ config BRCMSMAC
default n
depends on PCI
depends on WLAN && MAC80211
+ depends on X86 || MIPS
select BRCMUTIL
select FW_LOADER
select CRC_CCITT
@@ -20,6 +21,7 @@ config BRCMFMAC
default n
depends on MMC
depends on WLAN && CFG80211
+ depends on X86 || MIPS
select BRCMUTIL
select FW_LOADER
select WIRELESS_EXT
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index 1502d80f6f78..20008a4376e8 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -2,6 +2,7 @@ config COMEDI
tristate "Data acquisition support (comedi)"
default N
depends on m
+ depends on BROKEN || FRV || M32R || MN10300 || SUPERH || TILE || X86
---help---
Enable support a wide range of data acquisition devices
for Linux.
@@ -160,6 +161,7 @@ config COMEDI_PCL730
config COMEDI_PCL812
tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
@@ -171,6 +173,7 @@ config COMEDI_PCL812
config COMEDI_PCL816
tristate "Advantech PCL-814 and PCL-816 ISA card support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for Advantech PCL-814 and PCL-816 ISA cards
@@ -180,6 +183,7 @@ config COMEDI_PCL816
config COMEDI_PCL818
tristate "Advantech PCL-718 and PCL-818 ISA card support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for Advantech PCL-818 ISA cards
@@ -269,6 +273,7 @@ config COMEDI_DAS800
config COMEDI_DAS1800
tristate "DAS1800 and compatible ISA card support"
+ depends on VIRT_TO_BUS
select COMEDI_FC
default N
---help---
@@ -340,6 +345,7 @@ config COMEDI_DT2817
config COMEDI_DT282X
tristate "Data Translation DT2821 series and DT-EZ ISA card support"
select COMEDI_FC
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for Data Translation DT2821 series including DT-EZ
@@ -419,6 +425,7 @@ config COMEDI_ADQ12B
config COMEDI_NI_AT_A2150
tristate "NI AT-A2150 ISA card support"
depends on COMEDI_NI_COMMON
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for National Instruments AT-A2150 cards
@@ -536,6 +543,7 @@ if COMEDI_PCI_DRIVERS && PCI
config COMEDI_ADDI_APCI_035
tristate "ADDI-DATA APCI_035 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_035 cards
@@ -545,6 +553,7 @@ config COMEDI_ADDI_APCI_035
config COMEDI_ADDI_APCI_1032
tristate "ADDI-DATA APCI_1032 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_1032 cards
@@ -554,6 +563,7 @@ config COMEDI_ADDI_APCI_1032
config COMEDI_ADDI_APCI_1500
tristate "ADDI-DATA APCI_1500 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_1500 cards
@@ -563,6 +573,7 @@ config COMEDI_ADDI_APCI_1500
config COMEDI_ADDI_APCI_1516
tristate "ADDI-DATA APCI_1516 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_1516 cards
@@ -572,6 +583,7 @@ config COMEDI_ADDI_APCI_1516
config COMEDI_ADDI_APCI_1564
tristate "ADDI-DATA APCI_1564 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_1564 cards
@@ -581,6 +593,7 @@ config COMEDI_ADDI_APCI_1564
config COMEDI_ADDI_APCI_16XX
tristate "ADDI-DATA APCI_16xx support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_16xx cards
@@ -590,6 +603,7 @@ config COMEDI_ADDI_APCI_16XX
config COMEDI_ADDI_APCI_2016
tristate "ADDI-DATA APCI_2016 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_2016 cards
@@ -599,6 +613,7 @@ config COMEDI_ADDI_APCI_2016
config COMEDI_ADDI_APCI_2032
tristate "ADDI-DATA APCI_2032 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_2032 cards
@@ -608,6 +623,7 @@ config COMEDI_ADDI_APCI_2032
config COMEDI_ADDI_APCI_2200
tristate "ADDI-DATA APCI_2200 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_2200 cards
@@ -617,6 +633,7 @@ config COMEDI_ADDI_APCI_2200
config COMEDI_ADDI_APCI_3001
tristate "ADDI-DATA APCI_3001 support"
+ depends on VIRT_TO_BUS
select COMEDI_FC
default N
---help---
@@ -627,6 +644,7 @@ config COMEDI_ADDI_APCI_3001
config COMEDI_ADDI_APCI_3120
tristate "ADDI-DATA APCI_3520 support"
+ depends on VIRT_TO_BUS
select COMEDI_FC
default N
---help---
@@ -637,6 +655,7 @@ config COMEDI_ADDI_APCI_3120
config COMEDI_ADDI_APCI_3501
tristate "ADDI-DATA APCI_3501 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_3501 cards
@@ -646,6 +665,7 @@ config COMEDI_ADDI_APCI_3501
config COMEDI_ADDI_APCI_3XXX
tristate "ADDI-DATA APCI_3xxx support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_3xxx cards
@@ -712,6 +732,7 @@ config COMEDI_ADL_PCI9111
config COMEDI_ADL_PCI9118
tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
select COMEDI_FC
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
@@ -1287,6 +1308,7 @@ config COMEDI_NI_LABPC
depends on COMEDI_MITE
select COMEDI_8255
select COMEDI_FC
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for National Instruments Lab-PC and compatibles
diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig
index f96d5b5d5141..d329635fb5c4 100644
--- a/drivers/staging/iio/Kconfig
+++ b/drivers/staging/iio/Kconfig
@@ -4,7 +4,7 @@
menuconfig IIO
tristate "Industrial I/O support"
- depends on !S390
+ depends on GENERIC_HARDIRQS
help
The industrial I/O subsystem provides a unified framework for
drivers for many different types of embedded sensors using a
diff --git a/drivers/staging/iio/accel/adis16201.h b/drivers/staging/iio/accel/adis16201.h
index 0b9b85424dfa..4cc1a5bfab40 100644
--- a/drivers/staging/iio/accel/adis16201.h
+++ b/drivers/staging/iio/accel/adis16201.h
@@ -81,7 +81,6 @@ struct adis16201_state {
int adis16201_set_irq(struct iio_dev *indio_dev, bool enable);
-#ifdef CONFIG_IIO_RING_BUFFER
enum adis16201_scan {
ADIS16201_SCAN_SUPPLY,
ADIS16201_SCAN_ACC_X,
@@ -92,6 +91,7 @@ enum adis16201_scan {
ADIS16201_SCAN_INCLI_Y,
};
+#ifdef CONFIG_IIO_RING_BUFFER
void adis16201_remove_trigger(struct iio_dev *indio_dev);
int adis16201_probe_trigger(struct iio_dev *indio_dev);
diff --git a/drivers/staging/iio/accel/adis16203.h b/drivers/staging/iio/accel/adis16203.h
index 8bb8ce50c248..175e21bb9b40 100644
--- a/drivers/staging/iio/accel/adis16203.h
+++ b/drivers/staging/iio/accel/adis16203.h
@@ -76,7 +76,6 @@ struct adis16203_state {
int adis16203_set_irq(struct iio_dev *indio_dev, bool enable);
-#ifdef CONFIG_IIO_RING_BUFFER
enum adis16203_scan {
ADIS16203_SCAN_SUPPLY,
ADIS16203_SCAN_AUX_ADC,
@@ -85,6 +84,7 @@ enum adis16203_scan {
ADIS16203_SCAN_INCLI_Y,
};
+#ifdef CONFIG_IIO_RING_BUFFER
void adis16203_remove_trigger(struct iio_dev *indio_dev);
int adis16203_probe_trigger(struct iio_dev *indio_dev);
diff --git a/drivers/staging/iio/accel/adis16204.h b/drivers/staging/iio/accel/adis16204.h
index 5310a4297688..1690c0d15690 100644
--- a/drivers/staging/iio/accel/adis16204.h
+++ b/drivers/staging/iio/accel/adis16204.h
@@ -84,7 +84,6 @@ struct adis16204_state {
int adis16204_set_irq(struct iio_dev *indio_dev, bool enable);
-#ifdef CONFIG_IIO_RING_BUFFER
enum adis16204_scan {
ADIS16204_SCAN_SUPPLY,
ADIS16204_SCAN_ACC_X,
@@ -93,6 +92,7 @@ enum adis16204_scan {
ADIS16204_SCAN_TEMP,
};
+#ifdef CONFIG_IIO_RING_BUFFER
void adis16204_remove_trigger(struct iio_dev *indio_dev);
int adis16204_probe_trigger(struct iio_dev *indio_dev);
diff --git a/drivers/staging/iio/accel/adis16209.h b/drivers/staging/iio/accel/adis16209.h
index 58d08db6f9b5..3153cbee0957 100644
--- a/drivers/staging/iio/accel/adis16209.h
+++ b/drivers/staging/iio/accel/adis16209.h
@@ -121,8 +121,6 @@ struct adis16209_state {
int adis16209_set_irq(struct iio_dev *indio_dev, bool enable);
-#ifdef CONFIG_IIO_RING_BUFFER
-
#define ADIS16209_SCAN_SUPPLY 0
#define ADIS16209_SCAN_ACC_X 1
#define ADIS16209_SCAN_ACC_Y 2
@@ -132,6 +130,8 @@ int adis16209_set_irq(struct iio_dev *indio_dev, bool enable);
#define ADIS16209_SCAN_INCLI_Y 6
#define ADIS16209_SCAN_ROT 7
+#ifdef CONFIG_IIO_RING_BUFFER
+
void adis16209_remove_trigger(struct iio_dev *indio_dev);
int adis16209_probe_trigger(struct iio_dev *indio_dev);
diff --git a/drivers/staging/iio/gyro/adis16260.h b/drivers/staging/iio/gyro/adis16260.h
index 702dc982f62f..24bf70e4b29b 100644
--- a/drivers/staging/iio/gyro/adis16260.h
+++ b/drivers/staging/iio/gyro/adis16260.h
@@ -104,7 +104,6 @@ struct adis16260_state {
int adis16260_set_irq(struct iio_dev *indio_dev, bool enable);
-#ifdef CONFIG_IIO_RING_BUFFER
/* At the moment triggers are only used for ring buffer
* filling. This may change!
*/
@@ -115,6 +114,7 @@ int adis16260_set_irq(struct iio_dev *indio_dev, bool enable);
#define ADIS16260_SCAN_TEMP 3
#define ADIS16260_SCAN_ANGL 4
+#ifdef CONFIG_IIO_RING_BUFFER
void adis16260_remove_trigger(struct iio_dev *indio_dev);
int adis16260_probe_trigger(struct iio_dev *indio_dev);
diff --git a/drivers/staging/iio/imu/adis16400.h b/drivers/staging/iio/imu/adis16400.h
index db184d11dfc0..e87715b9acc6 100644
--- a/drivers/staging/iio/imu/adis16400.h
+++ b/drivers/staging/iio/imu/adis16400.h
@@ -158,7 +158,6 @@ struct adis16400_state {
int adis16400_set_irq(struct iio_dev *indio_dev, bool enable);
-#ifdef CONFIG_IIO_RING_BUFFER
/* At the moment triggers are only used for ring buffer
* filling. This may change!
*/
@@ -182,6 +181,7 @@ int adis16400_set_irq(struct iio_dev *indio_dev, bool enable);
#define ADIS16300_SCAN_INCLI_X 12
#define ADIS16300_SCAN_INCLI_Y 13
+#ifdef CONFIG_IIO_RING_BUFFER
void adis16400_remove_trigger(struct iio_dev *indio_dev);
int adis16400_probe_trigger(struct iio_dev *indio_dev);
diff --git a/drivers/staging/lirc/lirc_imon.c b/drivers/staging/lirc/lirc_imon.c
index 4039eda2a15b..4a9e563f40fa 100644
--- a/drivers/staging/lirc/lirc_imon.c
+++ b/drivers/staging/lirc/lirc_imon.c
@@ -672,8 +672,6 @@ static void imon_incoming_packet(struct imon_context *context,
static void usb_rx_callback(struct urb *urb)
{
struct imon_context *context;
- unsigned char *buf;
- int len;
int intfnum = 0;
if (!urb)
@@ -683,9 +681,6 @@ static void usb_rx_callback(struct urb *urb)
if (!context)
return;
- buf = urb->transfer_buffer;
- len = urb->actual_length;
-
switch (urb->status) {
case -ENOENT: /* usbcore unlink successful! */
return;
@@ -728,7 +723,6 @@ static int imon_probe(struct usb_interface *interface,
int ir_ep_found = 0;
int alloc_status = 0;
int vfd_proto_6p = 0;
- int code_length;
struct imon_context *context = NULL;
int i;
u16 vendor, product;
@@ -749,8 +743,6 @@ static int imon_probe(struct usb_interface *interface,
else
context->display = 1;
- code_length = BUF_CHUNK_SIZE * 8;
-
usbdev = usb_get_dev(interface_to_usbdev(interface));
iface_desc = interface->cur_altsetting;
num_endpts = iface_desc->desc.bNumEndpoints;
@@ -856,7 +848,7 @@ static int imon_probe(struct usb_interface *interface,
strcpy(driver->name, MOD_NAME);
driver->minor = -1;
- driver->code_length = sizeof(int) * 8;
+ driver->code_length = BUF_CHUNK_SIZE * 8;
driver->sample_rate = 0;
driver->features = LIRC_CAN_REC_MODE2;
driver->data = context;
diff --git a/drivers/staging/lirc/lirc_serial.c b/drivers/staging/lirc/lirc_serial.c
index 4a3cca03224a..805df913bb6e 100644
--- a/drivers/staging/lirc/lirc_serial.c
+++ b/drivers/staging/lirc/lirc_serial.c
@@ -838,7 +838,23 @@ static int hardware_init_port(void)
static int init_port(void)
{
- int i, nlow, nhigh;
+ int i, nlow, nhigh, result;
+
+ result = request_irq(irq, irq_handler,
+ IRQF_DISABLED | (share_irq ? IRQF_SHARED : 0),
+ LIRC_DRIVER_NAME, (void *)&hardware);
+
+ switch (result) {
+ case -EBUSY:
+ printk(KERN_ERR LIRC_DRIVER_NAME ": IRQ %d busy\n", irq);
+ return -EBUSY;
+ case -EINVAL:
+ printk(KERN_ERR LIRC_DRIVER_NAME
+ ": Bad irq number or handler\n");
+ return -EINVAL;
+ default:
+ break;
+ };
/* Reserve io region. */
/*
@@ -893,34 +909,17 @@ static int init_port(void)
printk(KERN_INFO LIRC_DRIVER_NAME ": Manually using active "
"%s receiver\n", sense ? "low" : "high");
+ dprintk("Interrupt %d, port %04x obtained\n", irq, io);
return 0;
}
static int set_use_inc(void *data)
{
- int result;
unsigned long flags;
/* initialize timestamp */
do_gettimeofday(&lasttv);
- result = request_irq(irq, irq_handler,
- IRQF_DISABLED | (share_irq ? IRQF_SHARED : 0),
- LIRC_DRIVER_NAME, (void *)&hardware);
-
- switch (result) {
- case -EBUSY:
- printk(KERN_ERR LIRC_DRIVER_NAME ": IRQ %d busy\n", irq);
- return -EBUSY;
- case -EINVAL:
- printk(KERN_ERR LIRC_DRIVER_NAME
- ": Bad irq number or handler\n");
- return -EINVAL;
- default:
- dprintk("Interrupt %d, port %04x obtained\n", irq, io);
- break;
- }
-
spin_lock_irqsave(&hardware[type].lock, flags);
/* Set DLAB 0. */
@@ -945,10 +944,6 @@ static void set_use_dec(void *data)
soutp(UART_IER, sinp(UART_IER) &
(~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI)));
spin_unlock_irqrestore(&hardware[type].lock, flags);
-
- free_irq(irq, (void *)&hardware);
-
- dprintk("freed IRQ %d\n", irq);
}
static ssize_t lirc_write(struct file *file, const char *buf,
@@ -1256,6 +1251,9 @@ exit_serial_exit:
static void __exit lirc_serial_exit_module(void)
{
lirc_serial_exit();
+
+ free_irq(irq, (void *)&hardware);
+
if (iommap != 0)
release_mem_region(iommap, 8 << ioshift);
else
diff --git a/drivers/staging/lirc/lirc_sir.c b/drivers/staging/lirc/lirc_sir.c
index a7b46f24f24e..0d3864594b12 100644
--- a/drivers/staging/lirc/lirc_sir.c
+++ b/drivers/staging/lirc/lirc_sir.c
@@ -739,23 +739,16 @@ static void send_space(unsigned long len)
static void send_pulse(unsigned long len)
{
long bytes_out = len / TIME_CONST;
- long time_left;
- time_left = (long)len - (long)bytes_out * (long)TIME_CONST;
- if (bytes_out == 0) {
+ if (bytes_out == 0)
bytes_out++;
- time_left = 0;
- }
+
while (bytes_out--) {
outb(PULSE, io + UART_TX);
/* FIXME treba seriozne cakanie z char/serial.c */
while (!(inb(io + UART_LSR) & UART_LSR_THRE))
;
}
-#if 0
- if (time_left > 0)
- safe_udelay(time_left);
-#endif
}
#endif
diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c
index dd6a57c3c3a3..4e051f6b52db 100644
--- a/drivers/staging/lirc/lirc_zilog.c
+++ b/drivers/staging/lirc/lirc_zilog.c
@@ -475,14 +475,14 @@ static int lirc_thread(void *arg)
dprintk("poll thread started\n");
while (!kthread_should_stop()) {
+ set_current_state(TASK_INTERRUPTIBLE);
+
/* if device not opened, we can sleep half a second */
if (atomic_read(&ir->open_count) == 0) {
schedule_timeout(HZ/2);
continue;
}
- set_current_state(TASK_INTERRUPTIBLE);
-
/*
* This is ~113*2 + 24 + jitter (2*repeat gap + code length).
* We use this interval as the chip resets every time you poll
diff --git a/drivers/staging/mei/init.c b/drivers/staging/mei/init.c
index d1ffa32cd141..685fcf639644 100644
--- a/drivers/staging/mei/init.c
+++ b/drivers/staging/mei/init.c
@@ -189,7 +189,7 @@ int mei_hw_init(struct mei_device *dev)
mutex_lock(&dev->device_lock);
}
- if (!err && !dev->recvd_msg) {
+ if (err <= 0 && !dev->recvd_msg) {
dev->mei_state = MEI_DISABLED;
dev_dbg(&dev->pdev->dev,
"wait_event_interruptible_timeout failed"
diff --git a/drivers/staging/mei/wd.c b/drivers/staging/mei/wd.c
index 2564b038636a..fff53d0b5c6e 100644
--- a/drivers/staging/mei/wd.c
+++ b/drivers/staging/mei/wd.c
@@ -169,10 +169,15 @@ int mei_wd_stop(struct mei_device *dev, bool preserve)
ret = wait_event_interruptible_timeout(dev->wait_stop_wd,
dev->wd_stopped, 10 * HZ);
mutex_lock(&dev->device_lock);
- if (!dev->wd_stopped)
- dev_dbg(&dev->pdev->dev, "stop wd failed to complete.\n");
- else
- dev_dbg(&dev->pdev->dev, "stop wd complete.\n");
+ if (dev->wd_stopped) {
+ dev_dbg(&dev->pdev->dev, "stop wd complete ret=%d.\n", ret);
+ ret = 0;
+ } else {
+ if (!ret)
+ ret = -ETIMEDOUT;
+ dev_warn(&dev->pdev->dev,
+ "stop wd failed to complete ret=%d.\n", ret);
+ }
if (preserve)
dev->wd_timeout = wd_timeout;
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-02 12:08:29 +0000