1 files changed, 0 insertions, 128 deletions
diff --git a/drivers/staging/dgnc/digi.h b/drivers/staging/dgnc/digi.h
deleted file mode 100644
index b414ee80db88..000000000000
--- a/drivers/staging/dgnc/digi.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2003 Digi International (www.digi.com)
- *	Scott H Kilau <Scott_Kilau at digi dot com>
- */
-
-#ifndef _DIGI_H
-#define _DIGI_H
-
-#define DIGI_GETA	(('e' << 8) | 94)	/* Read params */
-#define DIGI_SETA	(('e' << 8) | 95)	/* Set params */
-#define DIGI_SETAW	(('e' << 8) | 96)	/* Drain & set params */
-#define DIGI_SETAF	(('e' << 8) | 97)	/* Drain, flush & set params */
-#define DIGI_LOOPBACK (('d' << 8) | 252)	/* Enable/disable UART
-						 * internal loopback
-						 */
-#define DIGI_FAST	0x0002		/* Fast baud rates */
-#define RTSPACE		0x0004		/* RTS input flow control */
-#define CTSPACE		0x0008		/* CTS output flow control */
-#define DIGI_COOK	0x0080		/* Cooked processing done in FEP */
-#define DIGI_FORCEDCD	0x0100		/* Force carrier */
-#define	DIGI_ALTPIN	0x0200		/* Alternate RJ-45 pin config */
-#define	DIGI_PRINTER	0x0800		/* Hold port open for flow cntrl*/
-#define DIGI_DTR_TOGGLE	0x2000		/* Support DTR Toggle */
-#define DIGI_RTS_TOGGLE	0x8000		/* Support RTS Toggle */
-#define DIGI_PLEN	28		/* String length */
-#define	DIGI_TSIZ	10		/* Terminal string len */
-
-/*
- * Structure used with ioctl commands for DIGI parameters.
- */
-/**
- * struct digi_t - Ioctl commands for DIGI parameters.
- * @digi_flags: Flags.
- * @digi_maxcps: Maximum printer CPS.
- * @digi_maxchar: Maximum characters in the print queue.
- * @digi_bufsize: Buffer size.
- * @digi_onlen: Length of ON string.
- * @digi_offlen: Length of OFF string.
- * @digi_onstr: Printer ON string.
- * @digi_offstr: Printer OFF string.
- * @digi_term: Terminal string.
- */
-struct digi_t {
-	unsigned short	digi_flags;
-	unsigned short	digi_maxcps;
-	unsigned short	digi_maxchar;
-	unsigned short	digi_bufsize;
-	unsigned char	digi_onlen;
-	unsigned char	digi_offlen;
-	char		digi_onstr[DIGI_PLEN];
-	char		digi_offstr[DIGI_PLEN];
-	char		digi_term[DIGI_TSIZ];
-};
-
-/**
- * struct digi_getbuffer - Holds buffer use counts.
- */
-struct digi_getbuffer {
-	unsigned long tx_in;
-	unsigned long tx_out;
-	unsigned long rxbuf;
-	unsigned long txbuf;
-	unsigned long txdone;
-};
-
-/**
- * struct digi_getcounter
- * @norun: Number of UART overrun errors.
- * @noflow: Number of buffer overflow errors.
- * @nframe: Number of framing errors.
- * @nparity: Number of parity errors.
- * @nbreak: Number of breaks received.
- * @rbytes: Number of received bytes.
- * @tbytes: Number of transmitted bytes.
- */
-struct digi_getcounter {
-	unsigned long norun;
-	unsigned long noflow;
-	unsigned long nframe;
-	unsigned long nparity;
-	unsigned long nbreak;
-	unsigned long rbytes;
-	unsigned long tbytes;
-};
-
-#define DIGI_SETCUSTOMBAUD _IOW('e', 106, int)	/* Set integer baud rate */
-#define DIGI_GETCUSTOMBAUD _IOR('e', 107, int)	/* Get integer baud rate */
-
-#define DIGI_REALPORT_GETBUFFERS (('e' << 8) | 108)
-#define DIGI_REALPORT_SENDIMMEDIATE (('e' << 8) | 109)
-#define DIGI_REALPORT_GETCOUNTERS (('e' << 8) | 110)
-#define DIGI_REALPORT_GETEVENTS (('e' << 8) | 111)
-
-#define EV_OPU 0x0001 /* Output paused by client */
-#define EV_OPS 0x0002 /* Output paused by regular sw flowctrl */
-#define EV_IPU 0x0010 /* Input paused unconditionally by user */
-#define EV_IPS 0x0020 /* Input paused by high/low water marks */
-#define EV_TXB 0x0040 /* Transmit break pending */
-
-/**
- * struct ni_info - intelligent <--> non-intelligent DPA translation.
- */
-struct ni_info {
-	int board;
-	int channel;
-	int dtr;
-	int rts;
-	int cts;
-	int dsr;
-	int ri;
-	int dcd;
-	int curtx;
-	int currx;
-	unsigned short iflag;
-	unsigned short oflag;
-	unsigned short cflag;
-	unsigned short lflag;
-	unsigned int mstat;
-	unsigned char hflow;
-	unsigned char xmit_stopped;
-	unsigned char recv_stopped;
-	unsigned int baud;
-};
-
-#define TTY_FLIPBUF_SIZE 512
-
-#endif	/* _DIGI_H */