summaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi-pl022.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi/spi-pl022.c')
-rw-r--r--drivers/spi/spi-pl022.c251
1 files changed, 208 insertions, 43 deletions
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index 6abbe23c39b4..919464102d33 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -1,7 +1,7 @@
/*
* A driver for the ARM PL022 PrimeCell SSP/SPI bus master.
*
- * Copyright (C) 2008-2009 ST-Ericsson AB
+ * Copyright (C) 2008-2012 ST-Ericsson AB
* Copyright (C) 2006 STMicroelectronics Pvt. Ltd.
*
* Author: Linus Walleij <linus.walleij@stericsson.com>
@@ -40,6 +40,9 @@
#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
#include <linux/pm_runtime.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/pinctrl/consumer.h>
/*
* This macro is used to define some register default values.
@@ -356,6 +359,8 @@ struct vendor_data {
* @sgt_rx: scattertable for the RX transfer
* @sgt_tx: scattertable for the TX transfer
* @dummypage: a dummy page used for driving data on the bus with DMA
+ * @cur_cs: current chip select (gpio)
+ * @chipselects: list of chipselects (gpios)
*/
struct pl022 {
struct amba_device *adev;
@@ -363,6 +368,10 @@ struct pl022 {
resource_size_t phybase;
void __iomem *virtbase;
struct clk *clk;
+ /* Two optional pin states - default & sleep */
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *pins_default;
+ struct pinctrl_state *pins_sleep;
struct spi_master *master;
struct pl022_ssp_controller *master_info;
/* Message per-transfer pump */
@@ -389,6 +398,8 @@ struct pl022 {
char *dummypage;
bool dma_running;
#endif
+ int cur_cs;
+ int *chipselects;
};
/**
@@ -433,6 +444,14 @@ static void null_cs_control(u32 command)
pr_debug("pl022: dummy chip select control, CS=0x%x\n", command);
}
+static void pl022_cs_control(struct pl022 *pl022, u32 command)
+{
+ if (gpio_is_valid(pl022->cur_cs))
+ gpio_set_value(pl022->cur_cs, command);
+ else
+ pl022->cur_chip->cs_control(command);
+}
+
/**
* giveback - current spi_message is over, schedule next message and call
* callback of this message. Assumes that caller already
@@ -479,7 +498,7 @@ static void giveback(struct pl022 *pl022)
if (next_msg && next_msg->spi != pl022->cur_msg->spi)
next_msg = NULL;
if (!next_msg || pl022->cur_msg->state == STATE_ERROR)
- pl022->cur_chip->cs_control(SSP_CHIP_DESELECT);
+ pl022_cs_control(pl022, SSP_CHIP_DESELECT);
else
pl022->next_msg_cs_active = true;
@@ -818,8 +837,7 @@ static void dma_callback(void *data)
/* Update total bytes transferred */
msg->actual_length += pl022->cur_transfer->len;
if (pl022->cur_transfer->cs_change)
- pl022->cur_chip->
- cs_control(SSP_CHIP_DESELECT);
+ pl022_cs_control(pl022, SSP_CHIP_DESELECT);
/* Move to next transfer */
msg->state = next_transfer(pl022);
@@ -1252,8 +1270,7 @@ static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id)
/* Update total bytes transferred */
msg->actual_length += pl022->cur_transfer->len;
if (pl022->cur_transfer->cs_change)
- pl022->cur_chip->
- cs_control(SSP_CHIP_DESELECT);
+ pl022_cs_control(pl022, SSP_CHIP_DESELECT);
/* Move to next transfer */
msg->state = next_transfer(pl022);
tasklet_schedule(&pl022->pump_transfers);
@@ -1338,7 +1355,7 @@ static void pump_transfers(unsigned long data)
/* Reselect chip select only if cs_change was requested */
if (previous->cs_change)
- pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+ pl022_cs_control(pl022, SSP_CHIP_SELECT);
} else {
/* STATE_START */
message->state = STATE_RUNNING;
@@ -1377,7 +1394,7 @@ static void do_interrupt_dma_transfer(struct pl022 *pl022)
/* Enable target chip, if not already active */
if (!pl022->next_msg_cs_active)
- pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+ pl022_cs_control(pl022, SSP_CHIP_SELECT);
if (set_up_next_transfer(pl022, pl022->cur_transfer)) {
/* Error path */
@@ -1429,12 +1446,12 @@ static void do_polling_transfer(struct pl022 *pl022)
if (previous->delay_usecs)
udelay(previous->delay_usecs);
if (previous->cs_change)
- pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+ pl022_cs_control(pl022, SSP_CHIP_SELECT);
} else {
/* STATE_START */
message->state = STATE_RUNNING;
if (!pl022->next_msg_cs_active)
- pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+ pl022_cs_control(pl022, SSP_CHIP_SELECT);
}
/* Configuration Changing Per Transfer */
@@ -1466,7 +1483,7 @@ static void do_polling_transfer(struct pl022 *pl022)
/* Update total byte transferred */
message->actual_length += pl022->cur_transfer->len;
if (pl022->cur_transfer->cs_change)
- pl022->cur_chip->cs_control(SSP_CHIP_DESELECT);
+ pl022_cs_control(pl022, SSP_CHIP_DESELECT);
/* Move to next transfer */
message->state = next_transfer(pl022);
}
@@ -1495,6 +1512,7 @@ static int pl022_transfer_one_message(struct spi_master *master,
/* Setup the SPI using the per chip configuration */
pl022->cur_chip = spi_get_ctldata(msg->spi);
+ pl022->cur_cs = pl022->chipselects[msg->spi->chip_select];
restore_state(pl022);
flush(pl022);
@@ -1766,12 +1784,14 @@ static const struct pl022_config_chip pl022_default_chip_info = {
static int pl022_setup(struct spi_device *spi)
{
struct pl022_config_chip const *chip_info;
+ struct pl022_config_chip chip_info_dt;
struct chip_data *chip;
struct ssp_clock_params clk_freq = { .cpsdvsr = 0, .scr = 0};
int status = 0;
struct pl022 *pl022 = spi_master_get_devdata(spi->master);
unsigned int bits = spi->bits_per_word;
u32 tmp;
+ struct device_node *np = spi->dev.of_node;
if (!spi->max_speed_hz)
return -EINVAL;
@@ -1794,10 +1814,32 @@ static int pl022_setup(struct spi_device *spi)
chip_info = spi->controller_data;
if (chip_info == NULL) {
- chip_info = &pl022_default_chip_info;
- /* spi_board_info.controller_data not is supplied */
- dev_dbg(&spi->dev,
- "using default controller_data settings\n");
+ if (np) {
+ chip_info_dt = pl022_default_chip_info;
+
+ chip_info_dt.hierarchy = SSP_MASTER;
+ of_property_read_u32(np, "pl022,interface",
+ &chip_info_dt.iface);
+ of_property_read_u32(np, "pl022,com-mode",
+ &chip_info_dt.com_mode);
+ of_property_read_u32(np, "pl022,rx-level-trig",
+ &chip_info_dt.rx_lev_trig);
+ of_property_read_u32(np, "pl022,tx-level-trig",
+ &chip_info_dt.tx_lev_trig);
+ of_property_read_u32(np, "pl022,ctrl-len",
+ &chip_info_dt.ctrl_len);
+ of_property_read_u32(np, "pl022,wait-state",
+ &chip_info_dt.wait_state);
+ of_property_read_u32(np, "pl022,duplex",
+ &chip_info_dt.duplex);
+
+ chip_info = &chip_info_dt;
+ } else {
+ chip_info = &pl022_default_chip_info;
+ /* spi_board_info.controller_data not is supplied */
+ dev_dbg(&spi->dev,
+ "using default controller_data settings\n");
+ }
} else
dev_dbg(&spi->dev,
"using user supplied controller_data settings\n");
@@ -1840,8 +1882,9 @@ static int pl022_setup(struct spi_device *spi)
chip->xfer_type = chip_info->com_mode;
if (!chip_info->cs_control) {
chip->cs_control = null_cs_control;
- dev_warn(&spi->dev,
- "chip select function is NULL for this chip\n");
+ if (!gpio_is_valid(pl022->chipselects[spi->chip_select]))
+ dev_warn(&spi->dev,
+ "invalid chip select\n");
} else
chip->cs_control = chip_info->cs_control;
@@ -1986,6 +2029,34 @@ static void pl022_cleanup(struct spi_device *spi)
kfree(chip);
}
+static struct pl022_ssp_controller *
+pl022_platform_data_dt_get(struct device *dev)
+{
+ struct device_node *np = dev->of_node;
+ struct pl022_ssp_controller *pd;
+ u32 tmp;
+
+ if (!np) {
+ dev_err(dev, "no dt node defined\n");
+ return NULL;
+ }
+
+ pd = devm_kzalloc(dev, sizeof(struct pl022_ssp_controller), GFP_KERNEL);
+ if (!pd) {
+ dev_err(dev, "cannot allocate platform data memory\n");
+ return NULL;
+ }
+
+ pd->bus_id = -1;
+ of_property_read_u32(np, "num-cs", &tmp);
+ pd->num_chipselect = tmp;
+ of_property_read_u32(np, "pl022,autosuspend-delay",
+ &pd->autosuspend_delay);
+ pd->rt = of_property_read_bool(np, "pl022,rt");
+
+ return pd;
+}
+
static int __devinit
pl022_probe(struct amba_device *adev, const struct amba_id *id)
{
@@ -1993,22 +2064,31 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
struct pl022_ssp_controller *platform_info = adev->dev.platform_data;
struct spi_master *master;
struct pl022 *pl022 = NULL; /*Data for this driver */
- int status = 0;
+ struct device_node *np = adev->dev.of_node;
+ int status = 0, i, num_cs;
dev_info(&adev->dev,
"ARM PL022 driver, device ID: 0x%08x\n", adev->periphid);
- if (platform_info == NULL) {
- dev_err(&adev->dev, "probe - no platform data supplied\n");
- status = -ENODEV;
- goto err_no_pdata;
+ if (!platform_info && IS_ENABLED(CONFIG_OF))
+ platform_info = pl022_platform_data_dt_get(dev);
+
+ if (!platform_info) {
+ dev_err(dev, "probe: no platform data defined\n");
+ return -ENODEV;
+ }
+
+ if (platform_info->num_chipselect) {
+ num_cs = platform_info->num_chipselect;
+ } else {
+ dev_err(dev, "probe: no chip select defined\n");
+ return -ENODEV;
}
/* Allocate master with space for data */
master = spi_alloc_master(dev, sizeof(struct pl022));
if (master == NULL) {
dev_err(&adev->dev, "probe - cannot alloc SPI master\n");
- status = -ENOMEM;
- goto err_no_master;
+ return -ENOMEM;
}
pl022 = spi_master_get_devdata(master);
@@ -2016,19 +2096,71 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
pl022->master_info = platform_info;
pl022->adev = adev;
pl022->vendor = id->data;
+ pl022->chipselects = devm_kzalloc(dev, num_cs * sizeof(int),
+ GFP_KERNEL);
+
+ pl022->pinctrl = devm_pinctrl_get(dev);
+ if (IS_ERR(pl022->pinctrl)) {
+ status = PTR_ERR(pl022->pinctrl);
+ goto err_no_pinctrl;
+ }
+
+ pl022->pins_default = pinctrl_lookup_state(pl022->pinctrl,
+ PINCTRL_STATE_DEFAULT);
+ /* enable pins to be muxed in and configured */
+ if (!IS_ERR(pl022->pins_default)) {
+ status = pinctrl_select_state(pl022->pinctrl,
+ pl022->pins_default);
+ if (status)
+ dev_err(dev, "could not set default pins\n");
+ } else
+ dev_err(dev, "could not get default pinstate\n");
+
+ pl022->pins_sleep = pinctrl_lookup_state(pl022->pinctrl,
+ PINCTRL_STATE_SLEEP);
+ if (IS_ERR(pl022->pins_sleep))
+ dev_dbg(dev, "could not get sleep pinstate\n");
/*
* Bus Number Which has been Assigned to this SSP controller
* on this board
*/
master->bus_num = platform_info->bus_id;
- master->num_chipselect = platform_info->num_chipselect;
+ master->num_chipselect = num_cs;
master->cleanup = pl022_cleanup;
master->setup = pl022_setup;
master->prepare_transfer_hardware = pl022_prepare_transfer_hardware;
master->transfer_one_message = pl022_transfer_one_message;
master->unprepare_transfer_hardware = pl022_unprepare_transfer_hardware;
master->rt = platform_info->rt;
+ master->dev.of_node = dev->of_node;
+
+ if (platform_info->num_chipselect && platform_info->chipselects) {
+ for (i = 0; i < num_cs; i++)
+ pl022->chipselects[i] = platform_info->chipselects[i];
+ } else if (IS_ENABLED(CONFIG_OF)) {
+ for (i = 0; i < num_cs; i++) {
+ int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
+
+ if (cs_gpio == -EPROBE_DEFER) {
+ status = -EPROBE_DEFER;
+ goto err_no_gpio;
+ }
+
+ pl022->chipselects[i] = cs_gpio;
+
+ if (gpio_is_valid(cs_gpio)) {
+ if (devm_gpio_request(dev, cs_gpio, "ssp-pl022"))
+ dev_err(&adev->dev,
+ "could not request %d gpio\n",
+ cs_gpio);
+ else if (gpio_direction_output(cs_gpio, 1))
+ dev_err(&adev->dev,
+ "could set gpio %d as output\n",
+ cs_gpio);
+ }
+ }
+ }
/*
* Supports mode 0-3, loopback, and active low CS. Transfers are
@@ -2045,7 +2177,8 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
goto err_no_ioregion;
pl022->phybase = adev->res.start;
- pl022->virtbase = ioremap(adev->res.start, resource_size(&adev->res));
+ pl022->virtbase = devm_ioremap(dev, adev->res.start,
+ resource_size(&adev->res));
if (pl022->virtbase == NULL) {
status = -ENOMEM;
goto err_no_ioremap;
@@ -2055,7 +2188,7 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
pm_runtime_resume(dev);
- pl022->clk = clk_get(&adev->dev, NULL);
+ pl022->clk = devm_clk_get(&adev->dev, NULL);
if (IS_ERR(pl022->clk)) {
status = PTR_ERR(pl022->clk);
dev_err(&adev->dev, "could not retrieve SSP/SPI bus clock\n");
@@ -2083,8 +2216,8 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
SSP_CR1(pl022->virtbase));
load_ssp_default_config(pl022);
- status = request_irq(adev->irq[0], pl022_interrupt_handler, 0, "pl022",
- pl022);
+ status = devm_request_irq(dev, adev->irq[0], pl022_interrupt_handler,
+ 0, "pl022", pl022);
if (status < 0) {
dev_err(&adev->dev, "probe - cannot get IRQ (%d)\n", status);
goto err_no_irq;
@@ -2124,22 +2257,18 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
err_spi_register:
if (platform_info->enable_dma)
pl022_dma_remove(pl022);
-
- free_irq(adev->irq[0], pl022);
err_no_irq:
clk_disable(pl022->clk);
err_no_clk_en:
clk_unprepare(pl022->clk);
err_clk_prep:
- clk_put(pl022->clk);
err_no_clk:
- iounmap(pl022->virtbase);
err_no_ioremap:
amba_release_regions(adev);
err_no_ioregion:
+ err_no_gpio:
+ err_no_pinctrl:
spi_master_put(master);
- err_no_master:
- err_no_pdata:
return status;
}
@@ -2161,20 +2290,55 @@ pl022_remove(struct amba_device *adev)
if (pl022->master_info->enable_dma)
pl022_dma_remove(pl022);
- free_irq(adev->irq[0], pl022);
clk_disable(pl022->clk);
clk_unprepare(pl022->clk);
- clk_put(pl022->clk);
pm_runtime_disable(&adev->dev);
- iounmap(pl022->virtbase);
amba_release_regions(adev);
tasklet_disable(&pl022->pump_transfers);
spi_unregister_master(pl022->master);
- spi_master_put(pl022->master);
amba_set_drvdata(adev, NULL);
return 0;
}
+#if defined(CONFIG_SUSPEND) || defined(CONFIG_PM_RUNTIME)
+/*
+ * These two functions are used from both suspend/resume and
+ * the runtime counterparts to handle external resources like
+ * clocks, pins and regulators when going to sleep.
+ */
+static void pl022_suspend_resources(struct pl022 *pl022)
+{
+ int ret;
+
+ clk_disable(pl022->clk);
+
+ /* Optionally let pins go into sleep states */
+ if (!IS_ERR(pl022->pins_sleep)) {
+ ret = pinctrl_select_state(pl022->pinctrl,
+ pl022->pins_sleep);
+ if (ret)
+ dev_err(&pl022->adev->dev,
+ "could not set pins to sleep state\n");
+ }
+}
+
+static void pl022_resume_resources(struct pl022 *pl022)
+{
+ int ret;
+
+ /* Optionaly enable pins to be muxed in and configured */
+ if (!IS_ERR(pl022->pins_default)) {
+ ret = pinctrl_select_state(pl022->pinctrl,
+ pl022->pins_default);
+ if (ret)
+ dev_err(&pl022->adev->dev,
+ "could not set default pins\n");
+ }
+
+ clk_enable(pl022->clk);
+}
+#endif
+
#ifdef CONFIG_SUSPEND
static int pl022_suspend(struct device *dev)
{
@@ -2186,6 +2350,7 @@ static int pl022_suspend(struct device *dev)
dev_warn(dev, "cannot suspend master\n");
return ret;
}
+ pl022_suspend_resources(pl022);
dev_dbg(dev, "suspended\n");
return 0;
@@ -2196,6 +2361,8 @@ static int pl022_resume(struct device *dev)
struct pl022 *pl022 = dev_get_drvdata(dev);
int ret;
+ pl022_resume_resources(pl022);
+
/* Start the queue running */
ret = spi_master_resume(pl022->master);
if (ret)
@@ -2212,8 +2379,7 @@ static int pl022_runtime_suspend(struct device *dev)
{
struct pl022 *pl022 = dev_get_drvdata(dev);
- clk_disable(pl022->clk);
-
+ pl022_suspend_resources(pl022);
return 0;
}
@@ -2221,8 +2387,7 @@ static int pl022_runtime_resume(struct device *dev)
{
struct pl022 *pl022 = dev_get_drvdata(dev);
- clk_enable(pl022->clk);
-
+ pl022_resume_resources(pl022);
return 0;
}
#endif
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 07:39:27 +0000