summaryrefslogtreecommitdiffstats
path: root/drivers/soc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/soc')
-rw-r--r--drivers/soc/bcm/Kconfig2
-rw-r--r--drivers/soc/bcm/brcmstb/Kconfig10
-rw-r--r--drivers/soc/bcm/brcmstb/Makefile1
-rw-r--r--drivers/soc/bcm/brcmstb/pm/Makefile3
-rw-r--r--drivers/soc/bcm/brcmstb/pm/aon_defs.h113
-rw-r--r--drivers/soc/bcm/brcmstb/pm/pm-arm.c822
-rw-r--r--drivers/soc/bcm/brcmstb/pm/pm-mips.c461
-rw-r--r--drivers/soc/bcm/brcmstb/pm/pm.h89
-rw-r--r--drivers/soc/bcm/brcmstb/pm/s2-arm.S76
-rw-r--r--drivers/soc/bcm/brcmstb/pm/s2-mips.S200
-rw-r--r--drivers/soc/bcm/brcmstb/pm/s3-mips.S146
11 files changed, 1923 insertions, 0 deletions
diff --git a/drivers/soc/bcm/Kconfig b/drivers/soc/bcm/Kconfig
index 49f1e2a75d61..055a845ed979 100644
--- a/drivers/soc/bcm/Kconfig
+++ b/drivers/soc/bcm/Kconfig
@@ -20,4 +20,6 @@ config SOC_BRCMSTB
If unsure, say N.
+source "drivers/soc/bcm/brcmstb/Kconfig"
+
endmenu
diff --git a/drivers/soc/bcm/brcmstb/Kconfig b/drivers/soc/bcm/brcmstb/Kconfig
new file mode 100644
index 000000000000..d36f6e03c1a6
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/Kconfig
@@ -0,0 +1,10 @@
+if SOC_BRCMSTB
+
+config BRCMSTB_PM
+ bool "Support suspend/resume for STB platforms"
+ default y
+ depends on PM
+ depends on ARCH_BRCMSTB || BMIPS_GENERIC
+ select ARM_CPU_SUSPEND if ARM
+
+endif # SOC_BRCMSTB
diff --git a/drivers/soc/bcm/brcmstb/Makefile b/drivers/soc/bcm/brcmstb/Makefile
index 9120b2715d3e..01687c26535b 100644
--- a/drivers/soc/bcm/brcmstb/Makefile
+++ b/drivers/soc/bcm/brcmstb/Makefile
@@ -1 +1,2 @@
obj-y += common.o biuctrl.o
+obj-$(CONFIG_BRCMSTB_PM) += pm/
diff --git a/drivers/soc/bcm/brcmstb/pm/Makefile b/drivers/soc/bcm/brcmstb/pm/Makefile
new file mode 100644
index 000000000000..08bbd244ef11
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/pm/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_ARM) += s2-arm.o pm-arm.o
+AFLAGS_s2-arm.o := -march=armv7-a
+obj-$(CONFIG_BMIPS_GENERIC) += s2-mips.o s3-mips.o pm-mips.o
diff --git a/drivers/soc/bcm/brcmstb/pm/aon_defs.h b/drivers/soc/bcm/brcmstb/pm/aon_defs.h
new file mode 100644
index 000000000000..fb936abd847d
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/pm/aon_defs.h
@@ -0,0 +1,113 @@
+/*
+ * Always ON (AON) register interface between bootloader and Linux
+ *
+ * Copyright © 2014-2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __BRCMSTB_AON_DEFS_H__
+#define __BRCMSTB_AON_DEFS_H__
+
+#include <linux/compiler.h>
+
+/* Magic number in upper 16-bits */
+#define BRCMSTB_S3_MAGIC_MASK 0xffff0000
+#define BRCMSTB_S3_MAGIC_SHORT 0x5AFE0000
+
+enum {
+ /* Restore random key for AES memory verification (off = fixed key) */
+ S3_FLAG_LOAD_RANDKEY = (1 << 0),
+
+ /* Scratch buffer page table is present */
+ S3_FLAG_SCRATCH_BUFFER_TABLE = (1 << 1),
+
+ /* Skip all memory verification */
+ S3_FLAG_NO_MEM_VERIFY = (1 << 2),
+
+ /*
+ * Modification of this bit reserved for bootloader only.
+ * 1=PSCI started Linux, 0=Direct jump to Linux.
+ */
+ S3_FLAG_PSCI_BOOT = (1 << 3),
+
+ /*
+ * Modification of this bit reserved for bootloader only.
+ * 1=64 bit boot, 0=32 bit boot.
+ */
+ S3_FLAG_BOOTED64 = (1 << 4),
+};
+
+#define BRCMSTB_HASH_LEN (128 / 8) /* 128-bit hash */
+
+#define AON_REG_MAGIC_FLAGS 0x00
+#define AON_REG_CONTROL_LOW 0x04
+#define AON_REG_CONTROL_HIGH 0x08
+#define AON_REG_S3_HASH 0x0c /* hash of S3 params */
+#define AON_REG_CONTROL_HASH_LEN 0x1c
+#define AON_REG_PANIC 0x20
+
+#define BRCMSTB_S3_MAGIC 0x5AFEB007
+#define BRCMSTB_PANIC_MAGIC 0x512E115E
+#define BOOTLOADER_SCRATCH_SIZE 64
+#define BRCMSTB_DTU_STATE_MAP_ENTRIES (8*1024)
+#define BRCMSTB_DTU_CONFIG_ENTRIES (512)
+#define BRCMSTB_DTU_COUNT (2)
+
+#define IMAGE_DESCRIPTORS_BUFSIZE (2 * 1024)
+#define S3_BOOTLOADER_RESERVED (S3_FLAG_PSCI_BOOT | S3_FLAG_BOOTED64)
+
+struct brcmstb_bootloader_dtu_table {
+ uint32_t dtu_state_map[BRCMSTB_DTU_STATE_MAP_ENTRIES];
+ uint32_t dtu_config[BRCMSTB_DTU_CONFIG_ENTRIES];
+};
+
+/*
+ * Bootloader utilizes a custom parameter block left in DRAM for handling S3
+ * warm resume
+ */
+struct brcmstb_s3_params {
+ /* scratch memory for bootloader */
+ uint8_t scratch[BOOTLOADER_SCRATCH_SIZE];
+
+ uint32_t magic; /* BRCMSTB_S3_MAGIC */
+ uint64_t reentry; /* PA */
+
+ /* descriptors */
+ uint32_t hash[BRCMSTB_HASH_LEN / 4];
+
+ /*
+ * If 0, then ignore this parameter (there is only one set of
+ * descriptors)
+ *
+ * If non-0, then a second set of descriptors is stored at:
+ *
+ * descriptors + desc_offset_2
+ *
+ * The MAC result of both descriptors is XOR'd and stored in @hash
+ */
+ uint32_t desc_offset_2;
+
+ /*
+ * (Physical) address of a brcmstb_bootloader_scratch_table, for
+ * providing a large DRAM buffer to the bootloader
+ */
+ uint64_t buffer_table;
+
+ uint32_t spare[70];
+
+ uint8_t descriptors[IMAGE_DESCRIPTORS_BUFSIZE];
+ /*
+ * Must be last member of struct. See brcmstb_pm_s3_finish() for reason.
+ */
+ struct brcmstb_bootloader_dtu_table dtu[BRCMSTB_DTU_COUNT];
+} __packed;
+
+#endif /* __BRCMSTB_AON_DEFS_H__ */
diff --git a/drivers/soc/bcm/brcmstb/pm/pm-arm.c b/drivers/soc/bcm/brcmstb/pm/pm-arm.c
new file mode 100644
index 000000000000..dcf8c8065508
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/pm/pm-arm.c
@@ -0,0 +1,822 @@
+/*
+ * ARM-specific support for Broadcom STB S2/S3/S5 power management
+ *
+ * S2: clock gate CPUs and as many peripherals as possible
+ * S3: power off all of the chip except the Always ON (AON) island; keep DDR is
+ * self-refresh
+ * S5: (a.k.a. S3 cold boot) much like S3, except DDR is powered down, so we
+ * treat this mode like a soft power-off, with wakeup allowed from AON
+ *
+ * Copyright © 2014-2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) "brcmstb-pm: " fmt
+
+#include <linux/bitops.h>
+#include <linux/compiler.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kconfig.h>
+#include <linux/kernel.h>
+#include <linux/memblock.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/printk.h>
+#include <linux/proc_fs.h>
+#include <linux/sizes.h>
+#include <linux/slab.h>
+#include <linux/sort.h>
+#include <linux/suspend.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include <linux/soc/brcmstb/brcmstb.h>
+
+#include <asm/fncpy.h>
+#include <asm/setup.h>
+#include <asm/suspend.h>
+
+#include "pm.h"
+#include "aon_defs.h"
+
+#define SHIMPHY_DDR_PAD_CNTRL 0x8c
+
+/* Method #0 */
+#define SHIMPHY_PAD_PLL_SEQUENCE BIT(8)
+#define SHIMPHY_PAD_GATE_PLL_S3 BIT(9)
+
+/* Method #1 */
+#define PWRDWN_SEQ_NO_SEQUENCING 0
+#define PWRDWN_SEQ_HOLD_CHANNEL 1
+#define PWRDWN_SEQ_RESET_PLL 2
+#define PWRDWN_SEQ_POWERDOWN_PLL 3
+
+#define SHIMPHY_PAD_S3_PWRDWN_SEQ_MASK 0x00f00000
+#define SHIMPHY_PAD_S3_PWRDWN_SEQ_SHIFT 20
+
+#define DDR_FORCE_CKE_RST_N BIT(3)
+#define DDR_PHY_RST_N BIT(2)
+#define DDR_PHY_CKE BIT(1)
+
+#define DDR_PHY_NO_CHANNEL 0xffffffff
+
+#define MAX_NUM_MEMC 3
+
+struct brcmstb_memc {
+ void __iomem *ddr_phy_base;
+ void __iomem *ddr_shimphy_base;
+ void __iomem *ddr_ctrl;
+};
+
+struct brcmstb_pm_control {
+ void __iomem *aon_ctrl_base;
+ void __iomem *aon_sram;
+ struct brcmstb_memc memcs[MAX_NUM_MEMC];
+
+ void __iomem *boot_sram;
+ size_t boot_sram_len;
+
+ bool support_warm_boot;
+ size_t pll_status_offset;
+ int num_memc;
+
+ struct brcmstb_s3_params *s3_params;
+ dma_addr_t s3_params_pa;
+ int s3entry_method;
+ u32 warm_boot_offset;
+ u32 phy_a_standby_ctrl_offs;
+ u32 phy_b_standby_ctrl_offs;
+ bool needs_ddr_pad;
+ struct platform_device *pdev;
+};
+
+enum bsp_initiate_command {
+ BSP_CLOCK_STOP = 0x00,
+ BSP_GEN_RANDOM_KEY = 0x4A,
+ BSP_RESTORE_RANDOM_KEY = 0x55,
+ BSP_GEN_FIXED_KEY = 0x63,
+};
+
+#define PM_INITIATE 0x01
+#define PM_INITIATE_SUCCESS 0x00
+#define PM_INITIATE_FAIL 0xfe
+
+static struct brcmstb_pm_control ctrl;
+
+static int (*brcmstb_pm_do_s2_sram)(void __iomem *aon_ctrl_base,
+ void __iomem *ddr_phy_pll_status);
+
+static int brcmstb_init_sram(struct device_node *dn)
+{
+ void __iomem *sram;
+ struct resource res;
+ int ret;
+
+ ret = of_address_to_resource(dn, 0, &res);
+ if (ret)
+ return ret;
+
+ /* Uncached, executable remapping of SRAM */
+ sram = __arm_ioremap_exec(res.start, resource_size(&res), false);
+ if (!sram)
+ return -ENOMEM;
+
+ ctrl.boot_sram = sram;
+ ctrl.boot_sram_len = resource_size(&res);
+
+ return 0;
+}
+
+static const struct of_device_id sram_dt_ids[] = {
+ { .compatible = "mmio-sram" },
+ { /* sentinel */ }
+};
+
+static int do_bsp_initiate_command(enum bsp_initiate_command cmd)
+{
+ void __iomem *base = ctrl.aon_ctrl_base;
+ int ret;
+ int timeo = 1000 * 1000; /* 1 second */
+
+ writel_relaxed(0, base + AON_CTRL_PM_INITIATE);
+ (void)readl_relaxed(base + AON_CTRL_PM_INITIATE);
+
+ /* Go! */
+ writel_relaxed((cmd << 1) | PM_INITIATE, base + AON_CTRL_PM_INITIATE);
+
+ /*
+ * If firmware doesn't support the 'ack', then just assume it's done
+ * after 10ms. Note that this only works for command 0, BSP_CLOCK_STOP
+ */
+ if (of_machine_is_compatible("brcm,bcm74371a0")) {
+ (void)readl_relaxed(base + AON_CTRL_PM_INITIATE);
+ mdelay(10);
+ return 0;
+ }
+
+ for (;;) {
+ ret = readl_relaxed(base + AON_CTRL_PM_INITIATE);
+ if (!(ret & PM_INITIATE))
+ break;
+ if (timeo <= 0) {
+ pr_err("error: timeout waiting for BSP (%x)\n", ret);
+ break;
+ }
+ timeo -= 50;
+ udelay(50);
+ }
+
+ return (ret & 0xff) != PM_INITIATE_SUCCESS;
+}
+
+static int brcmstb_pm_handshake(void)
+{
+ void __iomem *base = ctrl.aon_ctrl_base;
+ u32 tmp;
+ int ret;
+
+ /* BSP power handshake, v1 */
+ tmp = readl_relaxed(base + AON_CTRL_HOST_MISC_CMDS);
+ tmp &= ~1UL;
+ writel_relaxed(tmp, base + AON_CTRL_HOST_MISC_CMDS);
+ (void)readl_relaxed(base + AON_CTRL_HOST_MISC_CMDS);
+
+ ret = do_bsp_initiate_command(BSP_CLOCK_STOP);
+ if (ret)
+ pr_err("BSP handshake failed\n");
+
+ /*
+ * HACK: BSP may have internal race on the CLOCK_STOP command.
+ * Avoid touching the BSP for a few milliseconds.
+ */
+ mdelay(3);
+
+ return ret;
+}
+
+static inline void shimphy_set(u32 value, u32 mask)
+{
+ int i;
+
+ if (!ctrl.needs_ddr_pad)
+ return;
+
+ for (i = 0; i < ctrl.num_memc; i++) {
+ u32 tmp;
+
+ tmp = readl_relaxed(ctrl.memcs[i].ddr_shimphy_base +
+ SHIMPHY_DDR_PAD_CNTRL);
+ tmp = value | (tmp & mask);
+ writel_relaxed(tmp, ctrl.memcs[i].ddr_shimphy_base +
+ SHIMPHY_DDR_PAD_CNTRL);
+ }
+ wmb(); /* Complete sequence in order. */
+}
+
+static inline void ddr_ctrl_set(bool warmboot)
+{
+ int i;
+
+ for (i = 0; i < ctrl.num_memc; i++) {
+ u32 tmp;
+
+ tmp = readl_relaxed(ctrl.memcs[i].ddr_ctrl +
+ ctrl.warm_boot_offset);
+ if (warmboot)
+ tmp |= 1;
+ else
+ tmp &= ~1; /* Cold boot */
+ writel_relaxed(tmp, ctrl.memcs[i].ddr_ctrl +
+ ctrl.warm_boot_offset);
+ }
+ /* Complete sequence in order */
+ wmb();
+}
+
+static inline void s3entry_method0(void)
+{
+ shimphy_set(SHIMPHY_PAD_GATE_PLL_S3 | SHIMPHY_PAD_PLL_SEQUENCE,
+ 0xffffffff);
+}
+
+static inline void s3entry_method1(void)
+{
+ /*
+ * S3 Entry Sequence
+ * -----------------
+ * Step 1: SHIMPHY_ADDR_CNTL_0_DDR_PAD_CNTRL [ S3_PWRDWN_SEQ ] = 3
+ * Step 2: MEMC_DDR_0_WARM_BOOT [ WARM_BOOT ] = 1
+ */
+ shimphy_set((PWRDWN_SEQ_POWERDOWN_PLL <<
+ SHIMPHY_PAD_S3_PWRDWN_SEQ_SHIFT),
+ ~SHIMPHY_PAD_S3_PWRDWN_SEQ_MASK);
+
+ ddr_ctrl_set(true);
+}
+
+static inline void s5entry_method1(void)
+{
+ int i;
+
+ /*
+ * S5 Entry Sequence
+ * -----------------
+ * Step 1: SHIMPHY_ADDR_CNTL_0_DDR_PAD_CNTRL [ S3_PWRDWN_SEQ ] = 3
+ * Step 2: MEMC_DDR_0_WARM_BOOT [ WARM_BOOT ] = 0
+ * Step 3: DDR_PHY_CONTROL_REGS_[AB]_0_STANDBY_CONTROL[ CKE ] = 0
+ * DDR_PHY_CONTROL_REGS_[AB]_0_STANDBY_CONTROL[ RST_N ] = 0
+ */
+ shimphy_set((PWRDWN_SEQ_POWERDOWN_PLL <<
+ SHIMPHY_PAD_S3_PWRDWN_SEQ_SHIFT),
+ ~SHIMPHY_PAD_S3_PWRDWN_SEQ_MASK);
+
+ ddr_ctrl_set(false);
+
+ for (i = 0; i < ctrl.num_memc; i++) {
+ u32 tmp;
+
+ /* Step 3: Channel A (RST_N = CKE = 0) */
+ tmp = readl_relaxed(ctrl.memcs[i].ddr_phy_base +
+ ctrl.phy_a_standby_ctrl_offs);
+ tmp &= ~(DDR_PHY_RST_N | DDR_PHY_RST_N);
+ writel_relaxed(tmp, ctrl.memcs[i].ddr_phy_base +
+ ctrl.phy_a_standby_ctrl_offs);
+
+ /* Step 3: Channel B? */
+ if (ctrl.phy_b_standby_ctrl_offs != DDR_PHY_NO_CHANNEL) {
+ tmp = readl_relaxed(ctrl.memcs[i].ddr_phy_base +
+ ctrl.phy_b_standby_ctrl_offs);
+ tmp &= ~(DDR_PHY_RST_N | DDR_PHY_RST_N);
+ writel_relaxed(tmp, ctrl.memcs[i].ddr_phy_base +
+ ctrl.phy_b_standby_ctrl_offs);
+ }
+ }
+ /* Must complete */
+ wmb();
+}
+
+/*
+ * Run a Power Management State Machine (PMSM) shutdown command and put the CPU
+ * into a low-power mode
+ */
+static void brcmstb_do_pmsm_power_down(unsigned long base_cmd, bool onewrite)
+{
+ void __iomem *base = ctrl.aon_ctrl_base;
+
+ if ((ctrl.s3entry_method == 1) && (base_cmd == PM_COLD_CONFIG))
+ s5entry_method1();
+
+ /* pm_start_pwrdn transition 0->1 */
+ writel_relaxed(base_cmd, base + AON_CTRL_PM_CTRL);
+
+ if (!onewrite) {
+ (void)readl_relaxed(base + AON_CTRL_PM_CTRL);
+
+ writel_relaxed(base_cmd | PM_PWR_DOWN, base + AON_CTRL_PM_CTRL);
+ (void)readl_relaxed(base + AON_CTRL_PM_CTRL);
+ }
+ wfi();
+}
+
+/* Support S5 cold boot out of "poweroff" */
+static void brcmstb_pm_poweroff(void)
+{
+ brcmstb_pm_handshake();
+
+ /* Clear magic S3 warm-boot value */
+ writel_relaxed(0, ctrl.aon_sram + AON_REG_MAGIC_FLAGS);
+ (void)readl_relaxed(ctrl.aon_sram + AON_REG_MAGIC_FLAGS);
+
+ /* Skip wait-for-interrupt signal; just use a countdown */
+ writel_relaxed(0x10, ctrl.aon_ctrl_base + AON_CTRL_PM_CPU_WAIT_COUNT);
+ (void)readl_relaxed(ctrl.aon_ctrl_base + AON_CTRL_PM_CPU_WAIT_COUNT);
+
+ if (ctrl.s3entry_method == 1) {
+ shimphy_set((PWRDWN_SEQ_POWERDOWN_PLL <<
+ SHIMPHY_PAD_S3_PWRDWN_SEQ_SHIFT),
+ ~SHIMPHY_PAD_S3_PWRDWN_SEQ_MASK);
+ ddr_ctrl_set(false);
+ brcmstb_do_pmsm_power_down(M1_PM_COLD_CONFIG, true);
+ return; /* We should never actually get here */
+ }
+
+ brcmstb_do_pmsm_power_down(PM_COLD_CONFIG, false);
+}
+
+static void *brcmstb_pm_copy_to_sram(void *fn, size_t len)
+{
+ unsigned int size = ALIGN(len, FNCPY_ALIGN);
+
+ if (ctrl.boot_sram_len < size) {
+ pr_err("standby code will not fit in SRAM\n");
+ return NULL;
+ }
+
+ return fncpy(ctrl.boot_sram, fn, size);
+}
+
+/*
+ * S2 suspend/resume picks up where we left off, so we must execute carefully
+ * from SRAM, in order to allow DDR to come back up safely before we continue.
+ */
+static int brcmstb_pm_s2(void)
+{
+ /* A previous S3 can set a value hazardous to S2, so make sure. */
+ if (ctrl.s3entry_method == 1) {
+ shimphy_set((PWRDWN_SEQ_NO_SEQUENCING <<
+ SHIMPHY_PAD_S3_PWRDWN_SEQ_SHIFT),
+ ~SHIMPHY_PAD_S3_PWRDWN_SEQ_MASK);
+ ddr_ctrl_set(false);
+ }
+
+ brcmstb_pm_do_s2_sram = brcmstb_pm_copy_to_sram(&brcmstb_pm_do_s2,
+ brcmstb_pm_do_s2_sz);
+ if (!brcmstb_pm_do_s2_sram)
+ return -EINVAL;
+
+ return brcmstb_pm_do_s2_sram(ctrl.aon_ctrl_base,
+ ctrl.memcs[0].ddr_phy_base +
+ ctrl.pll_status_offset);
+}
+
+/*
+ * This function is called on a new stack, so don't allow inlining (which will
+ * generate stack references on the old stack). It cannot be made static because
+ * it is referenced from brcmstb_pm_s3()
+ */
+noinline int brcmstb_pm_s3_finish(void)
+{
+ struct brcmstb_s3_params *params = ctrl.s3_params;
+ dma_addr_t params_pa = ctrl.s3_params_pa;
+ phys_addr_t reentry = virt_to_phys(&cpu_resume);
+ enum bsp_initiate_command cmd;
+ u32 flags;
+
+ /*
+ * Clear parameter structure, but not DTU area, which has already been
+ * filled in. We know DTU is a the end, so we can just subtract its
+ * size.
+ */
+ memset(params, 0, sizeof(*params) - sizeof(params->dtu));
+
+ flags = readl_relaxed(ctrl.aon_sram + AON_REG_MAGIC_FLAGS);
+
+ flags &= S3_BOOTLOADER_RESERVED;
+ flags |= S3_FLAG_NO_MEM_VERIFY;
+ flags |= S3_FLAG_LOAD_RANDKEY;
+
+ /* Load random / fixed key */
+ if (flags & S3_FLAG_LOAD_RANDKEY)
+ cmd = BSP_GEN_RANDOM_KEY;
+ else
+ cmd = BSP_GEN_FIXED_KEY;
+ if (do_bsp_initiate_command(cmd)) {
+ pr_info("key loading failed\n");
+ return -EIO;
+ }
+
+ params->magic = BRCMSTB_S3_MAGIC;
+ params->reentry = reentry;
+
+ /* No more writes to DRAM */
+ flush_cache_all();
+
+ flags |= BRCMSTB_S3_MAGIC_SHORT;
+
+ writel_relaxed(flags, ctrl.aon_sram + AON_REG_MAGIC_FLAGS);
+ writel_relaxed(lower_32_bits(params_pa),
+ ctrl.aon_sram + AON_REG_CONTROL_LOW);
+ writel_relaxed(upper_32_bits(params_pa),
+ ctrl.aon_sram + AON_REG_CONTROL_HIGH);
+
+ switch (ctrl.s3entry_method) {
+ case 0:
+ s3entry_method0();
+ brcmstb_do_pmsm_power_down(PM_WARM_CONFIG, false);
+ break;
+ case 1:
+ s3entry_method1();
+ brcmstb_do_pmsm_power_down(M1_PM_WARM_CONFIG, true);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Must have been interrupted from wfi()? */
+ return -EINTR;
+}
+
+static int brcmstb_pm_do_s3(unsigned long sp)
+{
+ unsigned long save_sp;
+ int ret;
+
+ asm volatile (
+ "mov %[save], sp\n"
+ "mov sp, %[new]\n"
+ "bl brcmstb_pm_s3_finish\n"
+ "mov %[ret], r0\n"
+ "mov %[new], sp\n"
+ "mov sp, %[save]\n"
+ : [save] "=&r" (save_sp), [ret] "=&r" (ret)
+ : [new] "r" (sp)
+ );
+
+ return ret;
+}
+
+static int brcmstb_pm_s3(void)
+{
+ void __iomem *sp = ctrl.boot_sram + ctrl.boot_sram_len;
+
+ return cpu_suspend((unsigned long)sp, brcmstb_pm_do_s3);
+}
+
+static int brcmstb_pm_standby(bool deep_standby)
+{
+ int ret;
+
+ if (brcmstb_pm_handshake())
+ return -EIO;
+
+ if (deep_standby)
+ ret = brcmstb_pm_s3();
+ else
+ ret = brcmstb_pm_s2();
+ if (ret)
+ pr_err("%s: standby failed\n", __func__);
+
+ return ret;
+}
+
+static int brcmstb_pm_enter(suspend_state_t state)
+{
+ int ret = -EINVAL;
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ ret = brcmstb_pm_standby(false);
+ break;
+ case PM_SUSPEND_MEM:
+ ret = brcmstb_pm_standby(true);
+ break;
+ }
+
+ return ret;
+}
+
+static int brcmstb_pm_valid(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ return true;
+ case PM_SUSPEND_MEM:
+ return ctrl.support_warm_boot;
+ default:
+ return false;
+ }
+}
+
+static const struct platform_suspend_ops brcmstb_pm_ops = {
+ .enter = brcmstb_pm_enter,
+ .valid = brcmstb_pm_valid,
+};
+
+static const struct of_device_id aon_ctrl_dt_ids[] = {
+ { .compatible = "brcm,brcmstb-aon-ctrl" },
+ {}
+};
+
+struct ddr_phy_ofdata {
+ bool supports_warm_boot;
+ size_t pll_status_offset;
+ int s3entry_method;
+ u32 warm_boot_offset;
+ u32 phy_a_standby_ctrl_offs;
+ u32 phy_b_standby_ctrl_offs;
+};
+
+static struct ddr_phy_ofdata ddr_phy_71_1 = {
+ .supports_warm_boot = true,
+ .pll_status_offset = 0x0c,
+ .s3entry_method = 1,
+ .warm_boot_offset = 0x2c,
+ .phy_a_standby_ctrl_offs = 0x198,
+ .phy_b_standby_ctrl_offs = DDR_PHY_NO_CHANNEL
+};
+
+static struct ddr_phy_ofdata ddr_phy_72_0 = {
+ .supports_warm_boot = true,
+ .pll_status_offset = 0x10,
+ .s3entry_method = 1,
+ .warm_boot_offset = 0x40,
+ .phy_a_standby_ctrl_offs = 0x2a4,
+ .phy_b_standby_ctrl_offs = 0x8a4
+};
+
+static struct ddr_phy_ofdata ddr_phy_225_1 = {
+ .supports_warm_boot = false,
+ .pll_status_offset = 0x4,
+ .s3entry_method = 0
+};
+
+static struct ddr_phy_ofdata ddr_phy_240_1 = {
+ .supports_warm_boot = true,
+ .pll_status_offset = 0x4,
+ .s3entry_method = 0
+};
+
+static const struct of_device_id ddr_phy_dt_ids[] = {
+ {
+ .compatible = "brcm,brcmstb-ddr-phy-v71.1",
+ .data = &ddr_phy_71_1,
+ },
+ {
+ .compatible = "brcm,brcmstb-ddr-phy-v72.0",
+ .data = &ddr_phy_72_0,
+ },
+ {
+ .compatible = "brcm,brcmstb-ddr-phy-v225.1",
+ .data = &ddr_phy_225_1,
+ },
+ {
+ .compatible = "brcm,brcmstb-ddr-phy-v240.1",
+ .data = &ddr_phy_240_1,
+ },
+ {
+ /* Same as v240.1, for the registers we care about */
+ .compatible = "brcm,brcmstb-ddr-phy-v240.2",
+ .data = &ddr_phy_240_1,
+ },
+ {}
+};
+
+struct ddr_seq_ofdata {
+ bool needs_ddr_pad;
+ u32 warm_boot_offset;
+};
+
+static const struct ddr_seq_ofdata ddr_seq_b22 = {
+ .needs_ddr_pad = false,
+ .warm_boot_offset = 0x2c,
+};
+
+static const struct ddr_seq_ofdata ddr_seq = {
+ .needs_ddr_pad = true,
+};
+
+static const struct of_device_id ddr_shimphy_dt_ids[] = {
+ { .compatible = "brcm,brcmstb-ddr-shimphy-v1.0" },
+ {}
+};
+
+static const struct of_device_id brcmstb_memc_of_match[] = {
+ {
+ .compatible = "brcm,brcmstb-memc-ddr-rev-b.2.2",
+ .data = &ddr_seq_b22,
+ },
+ {
+ .compatible = "brcm,brcmstb-memc-ddr",
+ .data = &ddr_seq,
+ },
+ {},
+};
+
+static void __iomem *brcmstb_ioremap_match(const struct of_device_id *matches,
+ int index, const void **ofdata)
+{
+ struct device_node *dn;
+ const struct of_device_id *match;
+
+ dn = of_find_matching_node_and_match(NULL, matches, &match);
+ if (!dn)
+ return ERR_PTR(-EINVAL);
+
+ if (ofdata)
+ *ofdata = match->data;
+
+ return of_io_request_and_map(dn, index, dn->full_name);
+}
+
+static int brcmstb_pm_panic_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ writel_relaxed(BRCMSTB_PANIC_MAGIC, ctrl.aon_sram + AON_REG_PANIC);
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block brcmstb_pm_panic_nb = {
+ .notifier_call = brcmstb_pm_panic_notify,
+};
+
+static int brcmstb_pm_probe(struct platform_device *pdev)
+{
+ const struct ddr_phy_ofdata *ddr_phy_data;
+ const struct ddr_seq_ofdata *ddr_seq_data;
+ const struct of_device_id *of_id = NULL;
+ struct device_node *dn;
+ void __iomem *base;
+ int ret, i;
+
+ /* AON ctrl registers */
+ base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 0, NULL);
+ if (IS_ERR(base)) {
+ pr_err("error mapping AON_CTRL\n");
+ return PTR_ERR(base);
+ }
+ ctrl.aon_ctrl_base = base;
+
+ /* AON SRAM registers */
+ base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 1, NULL);
+ if (IS_ERR(base)) {
+ /* Assume standard offset */
+ ctrl.aon_sram = ctrl.aon_ctrl_base +
+ AON_CTRL_SYSTEM_DATA_RAM_OFS;
+ } else {
+ ctrl.aon_sram = base;
+ }
+
+ writel_relaxed(0, ctrl.aon_sram + AON_REG_PANIC);
+
+ /* DDR PHY registers */
+ base = brcmstb_ioremap_match(ddr_phy_dt_ids, 0,
+ (const void **)&ddr_phy_data);
+ if (IS_ERR(base)) {
+ pr_err("error mapping DDR PHY\n");
+ return PTR_ERR(base);
+ }
+ ctrl.support_warm_boot = ddr_phy_data->supports_warm_boot;
+ ctrl.pll_status_offset = ddr_phy_data->pll_status_offset;
+ /* Only need DDR PHY 0 for now? */
+ ctrl.memcs[0].ddr_phy_base = base;
+ ctrl.s3entry_method = ddr_phy_data->s3entry_method;
+ ctrl.phy_a_standby_ctrl_offs = ddr_phy_data->phy_a_standby_ctrl_offs;
+ ctrl.phy_b_standby_ctrl_offs = ddr_phy_data->phy_b_standby_ctrl_offs;
+ /*
+ * Slightly grosss to use the phy ver to get a memc,
+ * offset but that is the only versioned things so far
+ * we can test for.
+ */
+ ctrl.warm_boot_offset = ddr_phy_data->warm_boot_offset;
+
+ /* DDR SHIM-PHY registers */
+ for_each_matching_node(dn, ddr_shimphy_dt_ids) {
+ i = ctrl.num_memc;
+ if (i >= MAX_NUM_MEMC) {
+ pr_warn("too many MEMCs (max %d)\n", MAX_NUM_MEMC);
+ break;
+ }
+
+ base = of_io_request_and_map(dn, 0, dn->full_name);
+ if (IS_ERR(base)) {
+ if (!ctrl.support_warm_boot)
+ break;
+
+ pr_err("error mapping DDR SHIMPHY %d\n", i);
+ return PTR_ERR(base);
+ }
+ ctrl.memcs[i].ddr_shimphy_base = base;
+ ctrl.num_memc++;
+ }
+
+ /* Sequencer DRAM Param and Control Registers */
+ i = 0;
+ for_each_matching_node(dn, brcmstb_memc_of_match) {
+ base = of_iomap(dn, 0);
+ if (!base) {
+ pr_err("error mapping DDR Sequencer %d\n", i);
+ return -ENOMEM;
+ }
+
+ of_id = of_match_node(brcmstb_memc_of_match, dn);
+ if (!of_id) {
+ iounmap(base);
+ return -EINVAL;
+ }
+
+ ddr_seq_data = of_id->data;
+ ctrl.needs_ddr_pad = ddr_seq_data->needs_ddr_pad;
+ /* Adjust warm boot offset based on the DDR sequencer */
+ if (ddr_seq_data->warm_boot_offset)
+ ctrl.warm_boot_offset = ddr_seq_data->warm_boot_offset;
+
+ ctrl.memcs[i].ddr_ctrl = base;
+ i++;
+ }
+
+ pr_debug("PM: supports warm boot:%d, method:%d, wboffs:%x\n",
+ ctrl.support_warm_boot, ctrl.s3entry_method,
+ ctrl.warm_boot_offset);
+
+ dn = of_find_matching_node(NULL, sram_dt_ids);
+ if (!dn) {
+ pr_err("SRAM not found\n");
+ return -EINVAL;
+ }
+
+ ret = brcmstb_init_sram(dn);
+ if (ret) {
+ pr_err("error setting up SRAM for PM\n");
+ return ret;
+ }
+
+ ctrl.pdev = pdev;
+
+ ctrl.s3_params = kmalloc(sizeof(*ctrl.s3_params), GFP_KERNEL);
+ if (!ctrl.s3_params)
+ return -ENOMEM;
+ ctrl.s3_params_pa = dma_map_single(&pdev->dev, ctrl.s3_params,
+ sizeof(*ctrl.s3_params),
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(&pdev->dev, ctrl.s3_params_pa)) {
+ pr_err("error mapping DMA memory\n");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ atomic_notifier_chain_register(&panic_notifier_list,
+ &brcmstb_pm_panic_nb);
+
+ pm_power_off = brcmstb_pm_poweroff;
+ suspend_set_ops(&brcmstb_pm_ops);
+
+ return 0;
+
+out:
+ kfree(ctrl.s3_params);
+
+ pr_warn("PM: initialization failed with code %d\n", ret);
+
+ return ret;
+}
+
+static struct platform_driver brcmstb_pm_driver = {
+ .driver = {
+ .name = "brcmstb-pm",
+ .of_match_table = aon_ctrl_dt_ids,
+ },
+};
+
+static int __init brcmstb_pm_init(void)
+{
+ return platform_driver_probe(&brcmstb_pm_driver,
+ brcmstb_pm_probe);
+}
+module_init(brcmstb_pm_init);
diff --git a/drivers/soc/bcm/brcmstb/pm/pm-mips.c b/drivers/soc/bcm/brcmstb/pm/pm-mips.c
new file mode 100644
index 000000000000..9300b5f62e56
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/pm/pm-mips.c
@@ -0,0 +1,461 @@
+/*
+ * MIPS-specific support for Broadcom STB S2/S3/S5 power management
+ *
+ * Copyright (C) 2016-2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/printk.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+#include <linux/suspend.h>
+#include <asm/bmips.h>
+#include <asm/tlbflush.h>
+
+#include "pm.h"
+
+#define S2_NUM_PARAMS 6
+#define MAX_NUM_MEMC 3
+
+/* S3 constants */
+#define MAX_GP_REGS 16
+#define MAX_CP0_REGS 32
+#define NUM_MEMC_CLIENTS 128
+#define AON_CTRL_RAM_SIZE 128
+#define BRCMSTB_S3_MAGIC 0x5AFEB007
+
+#define CLEAR_RESET_MASK 0x01
+
+/* Index each CP0 register that needs to be saved */
+#define CONTEXT 0
+#define USER_LOCAL 1
+#define PGMK 2
+#define HWRENA 3
+#define COMPARE 4
+#define STATUS 5
+#define CONFIG 6
+#define MODE 7
+#define EDSP 8
+#define BOOT_VEC 9
+#define EBASE 10
+
+struct brcmstb_memc {
+ void __iomem *ddr_phy_base;
+ void __iomem *arb_base;
+};
+
+struct brcmstb_pm_control {
+ void __iomem *aon_ctrl_base;
+ void __iomem *aon_sram_base;
+ void __iomem *timers_base;
+ struct brcmstb_memc memcs[MAX_NUM_MEMC];
+ int num_memc;
+};
+
+struct brcm_pm_s3_context {
+ u32 cp0_regs[MAX_CP0_REGS];
+ u32 memc0_rts[NUM_MEMC_CLIENTS];
+ u32 sc_boot_vec;
+};
+
+struct brcmstb_mem_transfer;
+
+struct brcmstb_mem_transfer {
+ struct brcmstb_mem_transfer *next;
+ void *src;
+ void *dst;
+ dma_addr_t pa_src;
+ dma_addr_t pa_dst;
+ u32 len;
+ u8 key;
+ u8 mode;
+ u8 src_remapped;
+ u8 dst_remapped;
+ u8 src_dst_remapped;
+};
+
+#define AON_SAVE_SRAM(base, idx, val) \
+ __raw_writel(val, base + (idx << 2))
+
+/* Used for saving registers in asm */
+u32 gp_regs[MAX_GP_REGS];
+
+#define BSP_CLOCK_STOP 0x00
+#define PM_INITIATE 0x01
+
+static struct brcmstb_pm_control ctrl;
+
+static void brcm_pm_save_cp0_context(struct brcm_pm_s3_context *ctx)
+{
+ /* Generic MIPS */
+ ctx->cp0_regs[CONTEXT] = read_c0_context();
+ ctx->cp0_regs[USER_LOCAL] = read_c0_userlocal();
+ ctx->cp0_regs[PGMK] = read_c0_pagemask();
+ ctx->cp0_regs[HWRENA] = read_c0_cache();
+ ctx->cp0_regs[COMPARE] = read_c0_compare();
+ ctx->cp0_regs[STATUS] = read_c0_status();
+
+ /* Broadcom specific */
+ ctx->cp0_regs[CONFIG] = read_c0_brcm_config();
+ ctx->cp0_regs[MODE] = read_c0_brcm_mode();
+ ctx->cp0_regs[EDSP] = read_c0_brcm_edsp();
+ ctx->cp0_regs[BOOT_VEC] = read_c0_brcm_bootvec();
+ ctx->cp0_regs[EBASE] = read_c0_ebase();
+
+ ctx->sc_boot_vec = bmips_read_zscm_reg(0xa0);
+}
+
+static void brcm_pm_restore_cp0_context(struct brcm_pm_s3_context *ctx)
+{
+ /* Restore cp0 state */
+ bmips_write_zscm_reg(0xa0, ctx->sc_boot_vec);
+
+ /* Generic MIPS */
+ write_c0_context(ctx->cp0_regs[CONTEXT]);
+ write_c0_userlocal(ctx->cp0_regs[USER_LOCAL]);
+ write_c0_pagemask(ctx->cp0_regs[PGMK]);
+ write_c0_cache(ctx->cp0_regs[HWRENA]);
+ write_c0_compare(ctx->cp0_regs[COMPARE]);
+ write_c0_status(ctx->cp0_regs[STATUS]);
+
+ /* Broadcom specific */
+ write_c0_brcm_config(ctx->cp0_regs[CONFIG]);
+ write_c0_brcm_mode(ctx->cp0_regs[MODE]);
+ write_c0_brcm_edsp(ctx->cp0_regs[EDSP]);
+ write_c0_brcm_bootvec(ctx->cp0_regs[BOOT_VEC]);
+ write_c0_ebase(ctx->cp0_regs[EBASE]);
+}
+
+static void brcmstb_pm_handshake(void)
+{
+ void __iomem *base = ctrl.aon_ctrl_base;
+ u32 tmp;
+
+ /* BSP power handshake, v1 */
+ tmp = __raw_readl(base + AON_CTRL_HOST_MISC_CMDS);
+ tmp &= ~1UL;
+ __raw_writel(tmp, base + AON_CTRL_HOST_MISC_CMDS);
+ (void)__raw_readl(base + AON_CTRL_HOST_MISC_CMDS);
+
+ __raw_writel(0, base + AON_CTRL_PM_INITIATE);
+ (void)__raw_readl(base + AON_CTRL_PM_INITIATE);
+ __raw_writel(BSP_CLOCK_STOP | PM_INITIATE,
+ base + AON_CTRL_PM_INITIATE);
+ /*
+ * HACK: BSP may have internal race on the CLOCK_STOP command.
+ * Avoid touching the BSP for a few milliseconds.
+ */
+ mdelay(3);
+}
+
+static void brcmstb_pm_s5(void)
+{
+ void __iomem *base = ctrl.aon_ctrl_base;
+
+ brcmstb_pm_handshake();
+
+ /* Clear magic s3 warm-boot value */
+ AON_SAVE_SRAM(ctrl.aon_sram_base, 0, 0);
+
+ /* Set the countdown */
+ __raw_writel(0x10, base + AON_CTRL_PM_CPU_WAIT_COUNT);
+ (void)__raw_readl(base + AON_CTRL_PM_CPU_WAIT_COUNT);
+
+ /* Prepare to S5 cold boot */
+ __raw_writel(PM_COLD_CONFIG, base + AON_CTRL_PM_CTRL);
+ (void)__raw_readl(base + AON_CTRL_PM_CTRL);
+
+ __raw_writel((PM_COLD_CONFIG | PM_PWR_DOWN), base +
+ AON_CTRL_PM_CTRL);
+ (void)__raw_readl(base + AON_CTRL_PM_CTRL);
+
+ __asm__ __volatile__(
+ " wait\n"
+ : : : "memory");
+}
+
+static int brcmstb_pm_s3(void)
+{
+ struct brcm_pm_s3_context s3_context;
+ void __iomem *memc_arb_base;
+ unsigned long flags;
+ u32 tmp;
+ int i;
+
+ /* Prepare for s3 */
+ AON_SAVE_SRAM(ctrl.aon_sram_base, 0, BRCMSTB_S3_MAGIC);
+ AON_SAVE_SRAM(ctrl.aon_sram_base, 1, (u32)&s3_reentry);
+ AON_SAVE_SRAM(ctrl.aon_sram_base, 2, 0);
+
+ /* Clear RESET_HISTORY */
+ tmp = __raw_readl(ctrl.aon_ctrl_base + AON_CTRL_RESET_CTRL);
+ tmp &= ~CLEAR_RESET_MASK;
+ __raw_writel(tmp, ctrl.aon_ctrl_base + AON_CTRL_RESET_CTRL);
+
+ local_irq_save(flags);
+
+ /* Inhibit DDR_RSTb pulse for both MMCs*/
+ for (i = 0; i < ctrl.num_memc; i++) {
+ tmp = __raw_readl(ctrl.memcs[i].ddr_phy_base +
+ DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL);
+
+ tmp &= ~0x0f;
+ __raw_writel(tmp, ctrl.memcs[i].ddr_phy_base +
+ DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL);
+ tmp |= (0x05 | BIT(5));
+ __raw_writel(tmp, ctrl.memcs[i].ddr_phy_base +
+ DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL);
+ }
+
+ /* Save CP0 context */
+ brcm_pm_save_cp0_context(&s3_context);
+
+ /* Save RTS(skip debug register) */
+ memc_arb_base = ctrl.memcs[0].arb_base + 4;
+ for (i = 0; i < NUM_MEMC_CLIENTS; i++) {
+ s3_context.memc0_rts[i] = __raw_readl(memc_arb_base);
+ memc_arb_base += 4;
+ }
+
+ /* Save I/O context */
+ local_flush_tlb_all();
+ _dma_cache_wback_inv(0, ~0);
+
+ brcm_pm_do_s3(ctrl.aon_ctrl_base, current_cpu_data.dcache.linesz);
+
+ /* CPU reconfiguration */
+ local_flush_tlb_all();
+ bmips_cpu_setup();
+ cpumask_clear(&bmips_booted_mask);
+
+ /* Restore RTS (skip debug register) */
+ memc_arb_base = ctrl.memcs[0].arb_base + 4;
+ for (i = 0; i < NUM_MEMC_CLIENTS; i++) {
+ __raw_writel(s3_context.memc0_rts[i], memc_arb_base);
+ memc_arb_base += 4;
+ }
+
+ /* restore CP0 context */
+ brcm_pm_restore_cp0_context(&s3_context);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+static int brcmstb_pm_s2(void)
+{
+ /*
+ * We need to pass 6 arguments to an assembly function. Lets avoid the
+ * stack and pass arguments in a explicit 4 byte array. The assembly
+ * code assumes all arguments are 4 bytes and arguments are ordered
+ * like so:
+ *
+ * 0: AON_CTRl base register
+ * 1: DDR_PHY base register
+ * 2: TIMERS base resgister
+ * 3: I-Cache line size
+ * 4: Restart vector address
+ * 5: Restart vector size
+ */
+ u32 s2_params[6];
+
+ /* Prepare s2 parameters */
+ s2_params[0] = (u32)ctrl.aon_ctrl_base;
+ s2_params[1] = (u32)ctrl.memcs[0].ddr_phy_base;
+ s2_params[2] = (u32)ctrl.timers_base;
+ s2_params[3] = (u32)current_cpu_data.icache.linesz;
+ s2_params[4] = (u32)BMIPS_WARM_RESTART_VEC;
+ s2_params[5] = (u32)(bmips_smp_int_vec_end -
+ bmips_smp_int_vec);
+
+ /* Drop to standby */
+ brcm_pm_do_s2(s2_params);
+
+ return 0;
+}
+
+static int brcmstb_pm_standby(bool deep_standby)
+{
+ brcmstb_pm_handshake();
+
+ /* Send IRQs to BMIPS_WARM_RESTART_VEC */
+ clear_c0_cause(CAUSEF_IV);
+ irq_disable_hazard();
+ set_c0_status(ST0_BEV);
+ irq_disable_hazard();
+
+ if (deep_standby)
+ brcmstb_pm_s3();
+ else
+ brcmstb_pm_s2();
+
+ /* Send IRQs to normal runtime vectors */
+ clear_c0_status(ST0_BEV);
+ irq_disable_hazard();
+ set_c0_cause(CAUSEF_IV);
+ irq_disable_hazard();
+
+ return 0;
+}
+
+static int brcmstb_pm_enter(suspend_state_t state)
+{
+ int ret = -EINVAL;
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ ret = brcmstb_pm_standby(false);
+ break;
+ case PM_SUSPEND_MEM:
+ ret = brcmstb_pm_standby(true);
+ break;
+ }
+
+ return ret;
+}
+
+static int brcmstb_pm_valid(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ return true;
+ case PM_SUSPEND_MEM:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct platform_suspend_ops brcmstb_pm_ops = {
+ .enter = brcmstb_pm_enter,
+ .valid = brcmstb_pm_valid,
+};
+
+static const struct of_device_id aon_ctrl_dt_ids[] = {
+ { .compatible = "brcm,brcmstb-aon-ctrl" },
+ { /* sentinel */ }
+};
+
+static const struct of_device_id ddr_phy_dt_ids[] = {
+ { .compatible = "brcm,brcmstb-ddr-phy" },
+ { /* sentinel */ }
+};
+
+static const struct of_device_id arb_dt_ids[] = {
+ { .compatible = "brcm,brcmstb-memc-arb" },
+ { /* sentinel */ }
+};
+
+static const struct of_device_id timers_ids[] = {
+ { .compatible = "brcm,brcmstb-timers" },
+ { /* sentinel */ }
+};
+
+static inline void __iomem *brcmstb_ioremap_node(struct device_node *dn,
+ int index)
+{
+ return of_io_request_and_map(dn, index, dn->full_name);
+}
+
+static void __iomem *brcmstb_ioremap_match(const struct of_device_id *matches,
+ int index, const void **ofdata)
+{
+ struct device_node *dn;
+ const struct of_device_id *match;
+
+ dn = of_find_matching_node_and_match(NULL, matches, &match);
+ if (!dn)
+ return ERR_PTR(-EINVAL);
+
+ if (ofdata)
+ *ofdata = match->data;
+
+ return brcmstb_ioremap_node(dn, index);
+}
+
+static int brcmstb_pm_init(void)
+{
+ struct device_node *dn;
+ void __iomem *base;
+ int i;
+
+ /* AON ctrl registers */
+ base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 0, NULL);
+ if (IS_ERR(base)) {
+ pr_err("error mapping AON_CTRL\n");
+ goto aon_err;
+ }
+ ctrl.aon_ctrl_base = base;
+
+ /* AON SRAM registers */
+ base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 1, NULL);
+ if (IS_ERR(base)) {
+ pr_err("error mapping AON_SRAM\n");
+ goto sram_err;
+ }
+ ctrl.aon_sram_base = base;
+
+ ctrl.num_memc = 0;
+ /* Map MEMC DDR PHY registers */
+ for_each_matching_node(dn, ddr_phy_dt_ids) {
+ i = ctrl.num_memc;
+ if (i >= MAX_NUM_MEMC) {
+ pr_warn("Too many MEMCs (max %d)\n", MAX_NUM_MEMC);
+ break;
+ }
+ base = brcmstb_ioremap_node(dn, 0);
+ if (IS_ERR(base))
+ goto ddr_err;
+
+ ctrl.memcs[i].ddr_phy_base = base;
+ ctrl.num_memc++;
+ }
+
+ /* MEMC ARB registers */
+ base = brcmstb_ioremap_match(arb_dt_ids, 0, NULL);
+ if (IS_ERR(base)) {
+ pr_err("error mapping MEMC ARB\n");
+ goto ddr_err;
+ }
+ ctrl.memcs[0].arb_base = base;
+
+ /* Timer registers */
+ base = brcmstb_ioremap_match(timers_ids, 0, NULL);
+ if (IS_ERR(base)) {
+ pr_err("error mapping timers\n");
+ goto tmr_err;
+ }
+ ctrl.timers_base = base;
+
+ /* s3 cold boot aka s5 */
+ pm_power_off = brcmstb_pm_s5;
+
+ suspend_set_ops(&brcmstb_pm_ops);
+
+ return 0;
+
+tmr_err:
+ iounmap(ctrl.memcs[0].arb_base);
+ddr_err:
+ for (i = 0; i < ctrl.num_memc; i++)
+ iounmap(ctrl.memcs[i].ddr_phy_base);
+
+ iounmap(ctrl.aon_sram_base);
+sram_err:
+ iounmap(ctrl.aon_ctrl_base);
+aon_err:
+ return PTR_ERR(base);
+}
+arch_initcall(brcmstb_pm_init);
diff --git a/drivers/soc/bcm/brcmstb/pm/pm.h b/drivers/soc/bcm/brcmstb/pm/pm.h
new file mode 100644
index 000000000000..b7d35ac70e60
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/pm/pm.h
@@ -0,0 +1,89 @@
+/*
+ * Definitions for Broadcom STB power management / Always ON (AON) block
+ *
+ * Copyright © 2016-2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __BRCMSTB_PM_H__
+#define __BRCMSTB_PM_H__
+
+#define AON_CTRL_RESET_CTRL 0x00
+#define AON_CTRL_PM_CTRL 0x04
+#define AON_CTRL_PM_STATUS 0x08
+#define AON_CTRL_PM_CPU_WAIT_COUNT 0x10
+#define AON_CTRL_PM_INITIATE 0x88
+#define AON_CTRL_HOST_MISC_CMDS 0x8c
+#define AON_CTRL_SYSTEM_DATA_RAM_OFS 0x200
+
+/* MIPS PM constants */
+/* MEMC0 offsets */
+#define DDR40_PHY_CONTROL_REGS_0_PLL_STATUS 0x10
+#define DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL 0xa4
+
+/* TIMER offsets */
+#define TIMER_TIMER1_CTRL 0x0c
+#define TIMER_TIMER1_STAT 0x1c
+
+/* TIMER defines */
+#define RESET_TIMER 0x0
+#define START_TIMER 0xbfffffff
+#define TIMER_MASK 0x3fffffff
+
+/* PM_CTRL bitfield (Method #0) */
+#define PM_FAST_PWRDOWN (1 << 6)
+#define PM_WARM_BOOT (1 << 5)
+#define PM_DEEP_STANDBY (1 << 4)
+#define PM_CPU_PWR (1 << 3)
+#define PM_USE_CPU_RDY (1 << 2)
+#define PM_PLL_PWRDOWN (1 << 1)
+#define PM_PWR_DOWN (1 << 0)
+
+/* PM_CTRL bitfield (Method #1) */
+#define PM_DPHY_STANDBY_CLEAR (1 << 20)
+#define PM_MIN_S3_WIDTH_TIMER_BYPASS (1 << 7)
+
+#define PM_S2_COMMAND (PM_PLL_PWRDOWN | PM_USE_CPU_RDY | PM_PWR_DOWN)
+
+/* Method 0 bitmasks */
+#define PM_COLD_CONFIG (PM_PLL_PWRDOWN | PM_DEEP_STANDBY)
+#define PM_WARM_CONFIG (PM_COLD_CONFIG | PM_USE_CPU_RDY | PM_WARM_BOOT)
+
+/* Method 1 bitmask */
+#define M1_PM_WARM_CONFIG (PM_DPHY_STANDBY_CLEAR | \
+ PM_MIN_S3_WIDTH_TIMER_BYPASS | \
+ PM_WARM_BOOT | PM_DEEP_STANDBY | \
+ PM_PLL_PWRDOWN | PM_PWR_DOWN)
+
+#define M1_PM_COLD_CONFIG (PM_DPHY_STANDBY_CLEAR | \
+ PM_MIN_S3_WIDTH_TIMER_BYPASS | \
+ PM_DEEP_STANDBY | \
+ PM_PLL_PWRDOWN | PM_PWR_DOWN)
+
+#ifndef __ASSEMBLY__
+
+#ifndef CONFIG_MIPS
+extern const unsigned long brcmstb_pm_do_s2_sz;
+extern asmlinkage int brcmstb_pm_do_s2(void __iomem *aon_ctrl_base,
+ void __iomem *ddr_phy_pll_status);
+#else
+/* s2 asm */
+extern asmlinkage int brcm_pm_do_s2(u32 *s2_params);
+
+/* s3 asm */
+extern asmlinkage int brcm_pm_do_s3(void __iomem *aon_ctrl_base,
+ int dcache_linesz);
+extern int s3_reentry;
+#endif /* CONFIG_MIPS */
+
+#endif
+
+#endif /* __BRCMSTB_PM_H__ */
diff --git a/drivers/soc/bcm/brcmstb/pm/s2-arm.S b/drivers/soc/bcm/brcmstb/pm/s2-arm.S
new file mode 100644
index 000000000000..1d472d564638
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/pm/s2-arm.S
@@ -0,0 +1,76 @@
+/*
+ * Copyright © 2014-2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+#include "pm.h"
+
+ .text
+ .align 3
+
+#define AON_CTRL_REG r10
+#define DDR_PHY_STATUS_REG r11
+
+/*
+ * r0: AON_CTRL base address
+ * r1: DDRY PHY PLL status register address
+ */
+ENTRY(brcmstb_pm_do_s2)
+ stmfd sp!, {r4-r11, lr}
+ mov AON_CTRL_REG, r0
+ mov DDR_PHY_STATUS_REG, r1
+
+ /* Flush memory transactions */
+ dsb
+
+ /* Cache DDR_PHY_STATUS_REG translation */
+ ldr r0, [DDR_PHY_STATUS_REG]
+
+ /* power down request */
+ ldr r0, =PM_S2_COMMAND
+ ldr r1, =0
+ str r1, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+ ldr r1, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+ str r0, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+ ldr r0, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+
+ /* Wait for interrupt */
+ wfi
+ nop
+
+ /* Bring MEMC back up */
+1: ldr r0, [DDR_PHY_STATUS_REG]
+ ands r0, #1
+ beq 1b
+
+ /* Power-up handshake */
+ ldr r0, =1
+ str r0, [AON_CTRL_REG, #AON_CTRL_HOST_MISC_CMDS]
+ ldr r0, [AON_CTRL_REG, #AON_CTRL_HOST_MISC_CMDS]
+
+ ldr r0, =0
+ str r0, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+ ldr r0, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+
+ /* Return to caller */
+ ldr r0, =0
+ ldmfd sp!, {r4-r11, pc}
+
+ ENDPROC(brcmstb_pm_do_s2)
+
+ /* Place literal pool here */
+ .ltorg
+
+ENTRY(brcmstb_pm_do_s2_sz)
+ .word . - brcmstb_pm_do_s2
diff --git a/drivers/soc/bcm/brcmstb/pm/s2-mips.S b/drivers/soc/bcm/brcmstb/pm/s2-mips.S
new file mode 100644
index 000000000000..27a14bc46043
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/pm/s2-mips.S
@@ -0,0 +1,200 @@
+/*
+ * Copyright (C) 2016 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+#include <asm/stackframe.h>
+
+#include "pm.h"
+
+ .text
+ .set noreorder
+ .align 5
+
+/*
+ * a0: u32 params array
+ */
+LEAF(brcm_pm_do_s2)
+
+ subu sp, 64
+ sw ra, 0(sp)
+ sw s0, 4(sp)
+ sw s1, 8(sp)
+ sw s2, 12(sp)
+ sw s3, 16(sp)
+ sw s4, 20(sp)
+ sw s5, 24(sp)
+ sw s6, 28(sp)
+ sw s7, 32(sp)
+
+ /*
+ * Dereference the params array
+ * s0: AON_CTRL base register
+ * s1: DDR_PHY base register
+ * s2: TIMERS base register
+ * s3: I-Cache line size
+ * s4: Restart vector address
+ * s5: Restart vector size
+ */
+ move t0, a0
+
+ lw s0, 0(t0)
+ lw s1, 4(t0)
+ lw s2, 8(t0)
+ lw s3, 12(t0)
+ lw s4, 16(t0)
+ lw s5, 20(t0)
+
+ /* Lock this asm section into the I-cache */
+ addiu t1, s3, -1
+ not t1
+
+ la t0, brcm_pm_do_s2
+ and t0, t1
+
+ la t2, asm_end
+ and t2, t1
+
+1: cache 0x1c, 0(t0)
+ bne t0, t2, 1b
+ addu t0, s3
+
+ /* Lock the interrupt vector into the I-cache */
+ move t0, zero
+
+2: move t1, s4
+ cache 0x1c, 0(t1)
+ addu t1, s3
+ addu t0, s3
+ ble t0, s5, 2b
+ nop
+
+ sync
+
+ /* Power down request */
+ li t0, PM_S2_COMMAND
+ sw zero, AON_CTRL_PM_CTRL(s0)
+ lw zero, AON_CTRL_PM_CTRL(s0)
+ sw t0, AON_CTRL_PM_CTRL(s0)
+ lw t0, AON_CTRL_PM_CTRL(s0)
+
+ /* Enable CP0 interrupt 2 and wait for interrupt */
+ mfc0 t0, CP0_STATUS
+ /* Save cp0 sr for restoring later */
+ move s6, t0
+
+ li t1, ~(ST0_IM | ST0_IE)
+ and t0, t1
+ ori t0, STATUSF_IP2
+ mtc0 t0, CP0_STATUS
+ nop
+ nop
+ nop
+ ori t0, ST0_IE
+ mtc0 t0, CP0_STATUS
+
+ /* Wait for interrupt */
+ wait
+ nop
+
+ /* Wait for memc0 */
+1: lw t0, DDR40_PHY_CONTROL_REGS_0_PLL_STATUS(s1)
+ andi t0, 1
+ beqz t0, 1b
+ nop
+
+ /* 1ms delay needed for stable recovery */
+ /* Use TIMER1 to count 1 ms */
+ li t0, RESET_TIMER
+ sw t0, TIMER_TIMER1_CTRL(s2)
+ lw t0, TIMER_TIMER1_CTRL(s2)
+
+ li t0, START_TIMER
+ sw t0, TIMER_TIMER1_CTRL(s2)
+ lw t0, TIMER_TIMER1_CTRL(s2)
+
+ /* Prepare delay */
+ li t0, TIMER_MASK
+ lw t1, TIMER_TIMER1_STAT(s2)
+ and t1, t0
+ /* 1ms delay */
+ addi t1, 27000
+
+ /* Wait for the timer value to exceed t1 */
+1: lw t0, TIMER_TIMER1_STAT(s2)
+ sgtu t2, t1, t0
+ bnez t2, 1b
+ nop
+
+ /* Power back up */
+ li t1, 1
+ sw t1, AON_CTRL_HOST_MISC_CMDS(s0)
+ lw t1, AON_CTRL_HOST_MISC_CMDS(s0)
+
+ sw zero, AON_CTRL_PM_CTRL(s0)
+ lw zero, AON_CTRL_PM_CTRL(s0)
+
+ /* Unlock I-cache */
+ addiu t1, s3, -1
+ not t1
+
+ la t0, brcm_pm_do_s2
+ and t0, t1
+
+ la t2, asm_end
+ and t2, t1
+
+1: cache 0x00, 0(t0)
+ bne t0, t2, 1b
+ addu t0, s3
+
+ /* Unlock interrupt vector */
+ move t0, zero
+
+2: move t1, s4
+ cache 0x00, 0(t1)
+ addu t1, s3
+ addu t0, s3
+ ble t0, s5, 2b
+ nop
+
+ /* Restore cp0 sr */
+ sync
+ nop
+ mtc0 s6, CP0_STATUS
+ nop
+
+ /* Set return value to success */
+ li v0, 0
+
+ /* Return to caller */
+ lw s7, 32(sp)
+ lw s6, 28(sp)
+ lw s5, 24(sp)
+ lw s4, 20(sp)
+ lw s3, 16(sp)
+ lw s2, 12(sp)
+ lw s1, 8(sp)
+ lw s0, 4(sp)
+ lw ra, 0(sp)
+ addiu sp, 64
+
+ jr ra
+ nop
+END(brcm_pm_do_s2)
+
+ .globl asm_end
+asm_end:
+ nop
+
diff --git a/drivers/soc/bcm/brcmstb/pm/s3-mips.S b/drivers/soc/bcm/brcmstb/pm/s3-mips.S
new file mode 100644
index 000000000000..1242308a8868
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/pm/s3-mips.S
@@ -0,0 +1,146 @@
+/*
+ * Copyright (C) 2016 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+#include <asm/bmips.h>
+
+#include "pm.h"
+
+ .text
+ .set noreorder
+ .align 5
+ .global s3_reentry
+
+/*
+ * a0: AON_CTRL base register
+ * a1: D-Cache line size
+ */
+LEAF(brcm_pm_do_s3)
+
+ /* Get the address of s3_context */
+ la t0, gp_regs
+ sw ra, 0(t0)
+ sw s0, 4(t0)
+ sw s1, 8(t0)
+ sw s2, 12(t0)
+ sw s3, 16(t0)
+ sw s4, 20(t0)
+ sw s5, 24(t0)
+ sw s6, 28(t0)
+ sw s7, 32(t0)
+ sw gp, 36(t0)
+ sw sp, 40(t0)
+ sw fp, 44(t0)
+
+ /* Save CP0 Status */
+ mfc0 t1, CP0_STATUS
+ sw t1, 48(t0)
+
+ /* Write-back gp registers - cache will be gone */
+ addiu t1, a1, -1
+ not t1
+ and t0, t1
+
+ /* Flush at least 64 bytes */
+ addiu t2, t0, 64
+ and t2, t1
+
+1: cache 0x17, 0(t0)
+ bne t0, t2, 1b
+ addu t0, a1
+
+ /* Drop to deep standby */
+ li t1, PM_WARM_CONFIG
+ sw zero, AON_CTRL_PM_CTRL(a0)
+ lw zero, AON_CTRL_PM_CTRL(a0)
+ sw t1, AON_CTRL_PM_CTRL(a0)
+ lw t1, AON_CTRL_PM_CTRL(a0)
+
+ li t1, (PM_WARM_CONFIG | PM_PWR_DOWN)
+ sw t1, AON_CTRL_PM_CTRL(a0)
+ lw t1, AON_CTRL_PM_CTRL(a0)
+
+ /* Enable CP0 interrupt 2 and wait for interrupt */
+ mfc0 t0, CP0_STATUS
+
+ li t1, ~(ST0_IM | ST0_IE)
+ and t0, t1
+ ori t0, STATUSF_IP2
+ mtc0 t0, CP0_STATUS
+ nop
+ nop
+ nop
+ ori t0, ST0_IE
+ mtc0 t0, CP0_STATUS
+
+ /* Wait for interrupt */
+ wait
+ nop
+
+s3_reentry:
+
+ /* Clear call/return stack */
+ li t0, (0x06 << 16)
+ mtc0 t0, $22, 2
+ ssnop
+ ssnop
+ ssnop
+
+ /* Clear jump target buffer */
+ li t0, (0x04 << 16)
+ mtc0 t0, $22, 2
+ ssnop
+ ssnop
+ ssnop
+
+ sync
+ nop
+
+ /* Setup mmu defaults */
+ mtc0 zero, CP0_WIRED
+ mtc0 zero, CP0_ENTRYHI
+ li k0, PM_DEFAULT_MASK
+ mtc0 k0, CP0_PAGEMASK
+
+ li sp, BMIPS_WARM_RESTART_VEC
+ la k0, plat_wired_tlb_setup
+ jalr k0
+ nop
+
+ /* Restore general purpose registers */
+ la t0, gp_regs
+ lw fp, 44(t0)
+ lw sp, 40(t0)
+ lw gp, 36(t0)
+ lw s7, 32(t0)
+ lw s6, 28(t0)
+ lw s5, 24(t0)
+ lw s4, 20(t0)
+ lw s3, 16(t0)
+ lw s2, 12(t0)
+ lw s1, 8(t0)
+ lw s0, 4(t0)
+ lw ra, 0(t0)
+
+ /* Restore CP0 status */
+ lw t1, 48(t0)
+ mtc0 t1, CP0_STATUS
+
+ /* Return to caller */
+ li v0, 0
+ jr ra
+ nop
+
+END(brcm_pm_do_s3)
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 09:45:42 +0000