summaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/crisv10.c173
1 files changed, 78 insertions, 95 deletions
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 7ba7d70f04d6..7be52fe288eb 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -23,16 +23,18 @@ static char *serial_version = "$Revision: 1.25 $";
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/init.h>
-#include <asm/uaccess.h>
#include <linux/kernel.h>
#include <linux/mutex.h>
#include <linux/bitops.h>
+#include <linux/seq_file.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/dma.h>
#include <asm/system.h>
-#include <linux/delay.h>
#include <arch/svinto.h>
@@ -456,7 +458,6 @@ static struct e100_serial rs_table[] = {
#define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial))
-static struct ktermios *serial_termios[NR_PORTS];
#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
static struct fast_timer fast_timers[NR_PORTS];
#endif
@@ -4257,151 +4258,132 @@ rs_open(struct tty_struct *tty, struct file * filp)
return 0;
}
+#ifdef CONFIG_PROC_FS
/*
* /proc fs routines....
*/
-static int line_info(char *buf, struct e100_serial *info)
+static void seq_line_info(struct seq_file *m, struct e100_serial *info)
{
- char stat_buf[30];
- int ret;
unsigned long tmp;
- ret = sprintf(buf, "%d: uart:E100 port:%lX irq:%d",
- info->line, (unsigned long)info->ioport, info->irq);
+ seq_printf(m, "%d: uart:E100 port:%lX irq:%d",
+ info->line, (unsigned long)info->ioport, info->irq);
if (!info->ioport || (info->type == PORT_UNKNOWN)) {
- ret += sprintf(buf+ret, "\n");
- return ret;
+ seq_printf(m, "\n");
+ return;
}
- stat_buf[0] = 0;
- stat_buf[1] = 0;
- if (!E100_RTS_GET(info))
- strcat(stat_buf, "|RTS");
- if (!E100_CTS_GET(info))
- strcat(stat_buf, "|CTS");
- if (!E100_DTR_GET(info))
- strcat(stat_buf, "|DTR");
- if (!E100_DSR_GET(info))
- strcat(stat_buf, "|DSR");
- if (!E100_CD_GET(info))
- strcat(stat_buf, "|CD");
- if (!E100_RI_GET(info))
- strcat(stat_buf, "|RI");
-
- ret += sprintf(buf+ret, " baud:%d", info->baud);
-
- ret += sprintf(buf+ret, " tx:%lu rx:%lu",
+ seq_printf(m, " baud:%d", info->baud);
+ seq_printf(m, " tx:%lu rx:%lu",
(unsigned long)info->icount.tx,
(unsigned long)info->icount.rx);
tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
- if (tmp) {
- ret += sprintf(buf+ret, " tx_pend:%lu/%lu",
- (unsigned long)tmp,
- (unsigned long)SERIAL_XMIT_SIZE);
- }
+ if (tmp)
+ seq_printf(m, " tx_pend:%lu/%lu",
+ (unsigned long)tmp,
+ (unsigned long)SERIAL_XMIT_SIZE);
- ret += sprintf(buf+ret, " rx_pend:%lu/%lu",
- (unsigned long)info->recv_cnt,
- (unsigned long)info->max_recv_cnt);
+ seq_printf(m, " rx_pend:%lu/%lu",
+ (unsigned long)info->recv_cnt,
+ (unsigned long)info->max_recv_cnt);
#if 1
if (info->port.tty) {
-
if (info->port.tty->stopped)
- ret += sprintf(buf+ret, " stopped:%i",
- (int)info->port.tty->stopped);
+ seq_printf(m, " stopped:%i",
+ (int)info->port.tty->stopped);
if (info->port.tty->hw_stopped)
- ret += sprintf(buf+ret, " hw_stopped:%i",
- (int)info->port.tty->hw_stopped);
+ seq_printf(m, " hw_stopped:%i",
+ (int)info->port.tty->hw_stopped);
}
{
unsigned char rstat = info->ioport[REG_STATUS];
- if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) )
- ret += sprintf(buf+ret, " xoff_detect:1");
+ if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect))
+ seq_printf(m, " xoff_detect:1");
}
#endif
-
-
-
if (info->icount.frame)
- ret += sprintf(buf+ret, " fe:%lu",
- (unsigned long)info->icount.frame);
+ seq_printf(m, " fe:%lu", (unsigned long)info->icount.frame);
if (info->icount.parity)
- ret += sprintf(buf+ret, " pe:%lu",
- (unsigned long)info->icount.parity);
+ seq_printf(m, " pe:%lu", (unsigned long)info->icount.parity);
if (info->icount.brk)
- ret += sprintf(buf+ret, " brk:%lu",
- (unsigned long)info->icount.brk);
+ seq_printf(m, " brk:%lu", (unsigned long)info->icount.brk);
if (info->icount.overrun)
- ret += sprintf(buf+ret, " oe:%lu",
- (unsigned long)info->icount.overrun);
+ seq_printf(m, " oe:%lu", (unsigned long)info->icount.overrun);
/*
* Last thing is the RS-232 status lines
*/
- ret += sprintf(buf+ret, " %s\n", stat_buf+1);
- return ret;
+ if (!E100_RTS_GET(info))
+ seq_puts(m, "|RTS");
+ if (!E100_CTS_GET(info))
+ seq_puts(m, "|CTS");
+ if (!E100_DTR_GET(info))
+ seq_puts(m, "|DTR");
+ if (!E100_DSR_GET(info))
+ seq_puts(m, "|DSR");
+ if (!E100_CD_GET(info))
+ seq_puts(m, "|CD");
+ if (!E100_RI_GET(info))
+ seq_puts(m, "|RI");
+ seq_puts(m, "\n");
}
-int rs_read_proc(char *page, char **start, off_t off, int count,
- int *eof, void *data)
+
+static int crisv10_proc_show(struct seq_file *m, void *v)
{
- int i, len = 0, l;
- off_t begin = 0;
+ int i;
- len += sprintf(page, "serinfo:1.0 driver:%s\n",
- serial_version);
- for (i = 0; i < NR_PORTS && len < 4000; i++) {
+ seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version);
+
+ for (i = 0; i < NR_PORTS; i++) {
if (!rs_table[i].enabled)
continue;
- l = line_info(page + len, &rs_table[i]);
- len += l;
- if (len+begin > off+count)
- goto done;
- if (len+begin < off) {
- begin += len;
- len = 0;
- }
+ seq_line_info(m, &rs_table[i]);
}
#ifdef DEBUG_LOG_INCLUDED
for (i = 0; i < debug_log_pos; i++) {
- len += sprintf(page + len, "%-4i %lu.%lu ", i, debug_log[i].time, timer_data_to_ns(debug_log[i].timer_data));
- len += sprintf(page + len, debug_log[i].string, debug_log[i].value);
- if (len+begin > off+count)
- goto done;
- if (len+begin < off) {
- begin += len;
- len = 0;
- }
+ seq_printf(m, "%-4i %lu.%lu ",
+ i, debug_log[i].time,
+ timer_data_to_ns(debug_log[i].timer_data));
+ seq_printf(m, debug_log[i].string, debug_log[i].value);
}
- len += sprintf(page + len, "debug_log %i/%i %li bytes\n",
- i, DEBUG_LOG_SIZE, begin+len);
+ seq_printf(m, "debug_log %i/%i\n", i, DEBUG_LOG_SIZE);
debug_log_pos = 0;
#endif
+ return 0;
+}
- *eof = 1;
-done:
- if (off >= len+begin)
- return 0;
- *start = page + (off-begin);
- return ((count < begin+len-off) ? count : begin+len-off);
+static int crisv10_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, crisv10_proc_show, NULL);
}
+static const struct file_operations crisv10_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = crisv10_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+#endif
+
+
/* Finally, routines used to initialize the serial driver. */
-static void
-show_serial_version(void)
+static void show_serial_version(void)
{
printk(KERN_INFO
- "ETRAX 100LX serial-driver %s, (c) 2000-2004 Axis Communications AB\r\n",
+ "ETRAX 100LX serial-driver %s, "
+ "(c) 2000-2004 Axis Communications AB\r\n",
&serial_version[11]); /* "$Revision: x.yy" */
}
@@ -4425,13 +4407,14 @@ static const struct tty_operations rs_ops = {
.break_ctl = rs_break,
.send_xchar = rs_send_xchar,
.wait_until_sent = rs_wait_until_sent,
- .read_proc = rs_read_proc,
.tiocmget = rs_tiocmget,
- .tiocmset = rs_tiocmset
+ .tiocmset = rs_tiocmset,
+#ifdef CONFIG_PROC_FS
+ .proc_fops = &crisv10_proc_fops,
+#endif
};
-static int __init
-rs_init(void)
+static int __init rs_init(void)
{
int i;
struct e100_serial *info;
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 23:26:51 +0000