summaryrefslogtreecommitdiffstats
path: root/drivers/serial/samsung.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial/samsung.c')
-rw-r--r--drivers/serial/samsung.c184
1 files changed, 147 insertions, 37 deletions
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 1e219d3d0352..41ac94872b8d 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -42,13 +42,14 @@
#include <linux/serial.h>
#include <linux/delay.h>
#include <linux/clk.h>
+#include <linux/cpufreq.h>
#include <asm/irq.h>
#include <mach/hardware.h>
+#include <mach/map.h>
#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
#include "samsung.h"
@@ -58,19 +59,6 @@
#define S3C24XX_SERIAL_MAJOR 204
#define S3C24XX_SERIAL_MINOR 64
-/* we can support 3 uarts, but not always use them */
-
-#ifdef CONFIG_CPU_S3C2400
-#define NR_PORTS (2)
-#else
-#define NR_PORTS (3)
-#endif
-
-/* port irq numbers */
-
-#define TX_IRQ(port) ((port)->irq + 1)
-#define RX_IRQ(port) ((port)->irq)
-
/* macros to change one thing to another */
#define tx_enabled(port) ((port)->unused[0])
@@ -136,8 +124,10 @@ static void s3c24xx_serial_rx_disable(struct uart_port *port)
static void s3c24xx_serial_stop_tx(struct uart_port *port)
{
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
+
if (tx_enabled(port)) {
- disable_irq(TX_IRQ(port));
+ disable_irq(ourport->tx_irq);
tx_enabled(port) = 0;
if (port->flags & UPF_CONS_FLOW)
s3c24xx_serial_rx_enable(port);
@@ -146,11 +136,13 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port)
static void s3c24xx_serial_start_tx(struct uart_port *port)
{
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
+
if (!tx_enabled(port)) {
if (port->flags & UPF_CONS_FLOW)
s3c24xx_serial_rx_disable(port);
- enable_irq(TX_IRQ(port));
+ enable_irq(ourport->tx_irq);
tx_enabled(port) = 1;
}
}
@@ -158,9 +150,11 @@ static void s3c24xx_serial_start_tx(struct uart_port *port)
static void s3c24xx_serial_stop_rx(struct uart_port *port)
{
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
+
if (rx_enabled(port)) {
dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
- disable_irq(RX_IRQ(port));
+ disable_irq(ourport->rx_irq);
rx_enabled(port) = 0;
}
}
@@ -384,13 +378,13 @@ static void s3c24xx_serial_shutdown(struct uart_port *port)
struct s3c24xx_uart_port *ourport = to_ourport(port);
if (ourport->tx_claimed) {
- free_irq(TX_IRQ(port), ourport);
+ free_irq(ourport->tx_irq, ourport);
tx_enabled(port) = 0;
ourport->tx_claimed = 0;
}
if (ourport->rx_claimed) {
- free_irq(RX_IRQ(port), ourport);
+ free_irq(ourport->rx_irq, ourport);
ourport->rx_claimed = 0;
rx_enabled(port) = 0;
}
@@ -407,12 +401,11 @@ static int s3c24xx_serial_startup(struct uart_port *port)
rx_enabled(port) = 1;
- ret = request_irq(RX_IRQ(port),
- s3c24xx_serial_rx_chars, 0,
+ ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_chars, 0,
s3c24xx_serial_portname(port), ourport);
if (ret != 0) {
- printk(KERN_ERR "cannot get irq %d\n", RX_IRQ(port));
+ printk(KERN_ERR "cannot get irq %d\n", ourport->rx_irq);
return ret;
}
@@ -422,12 +415,11 @@ static int s3c24xx_serial_startup(struct uart_port *port)
tx_enabled(port) = 1;
- ret = request_irq(TX_IRQ(port),
- s3c24xx_serial_tx_chars, 0,
+ ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_chars, 0,
s3c24xx_serial_portname(port), ourport);
if (ret) {
- printk(KERN_ERR "cannot get irq %d\n", TX_IRQ(port));
+ printk(KERN_ERR "cannot get irq %d\n", ourport->tx_irq);
goto err;
}
@@ -452,6 +444,8 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
{
struct s3c24xx_uart_port *ourport = to_ourport(port);
+ ourport->pm_level = level;
+
switch (level) {
case 3:
if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
@@ -661,6 +655,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
ourport->clksrc = clksrc;
ourport->baudclk = clk;
+ ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
}
switch (termios->c_cflag & CSIZE) {
@@ -752,6 +747,8 @@ static const char *s3c24xx_serial_type(struct uart_port *port)
return "S3C2440";
case PORT_S3C2412:
return "S3C2412";
+ case PORT_S3C6400:
+ return "S3C6400/10";
default:
return NULL;
}
@@ -827,14 +824,14 @@ static struct uart_ops s3c24xx_serial_ops = {
static struct uart_driver s3c24xx_uart_drv = {
.owner = THIS_MODULE,
.dev_name = "s3c2410_serial",
- .nr = 3,
+ .nr = CONFIG_SERIAL_SAMSUNG_UARTS,
.cons = S3C24XX_SERIAL_CONSOLE,
.driver_name = S3C24XX_SERIAL_NAME,
.major = S3C24XX_SERIAL_MAJOR,
.minor = S3C24XX_SERIAL_MINOR,
};
-static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
+static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = {
[0] = {
.port = {
.lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock),
@@ -859,7 +856,7 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
.line = 1,
}
},
-#if NR_PORTS > 2
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 2
[2] = {
.port = {
@@ -872,6 +869,20 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
.flags = UPF_BOOT_AUTOCONF,
.line = 2,
}
+ },
+#endif
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
+ [3] = {
+ .port = {
+ .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[3].port.lock),
+ .iotype = UPIO_MEM,
+ .irq = IRQ_S3CUART_RX3,
+ .uartclk = 0,
+ .fifosize = 16,
+ .ops = &s3c24xx_serial_ops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .line = 3,
+ }
}
#endif
};
@@ -890,6 +901,89 @@ static inline int s3c24xx_serial_resetport(struct uart_port *port,
return (info->reset_port)(port, cfg);
}
+
+#ifdef CONFIG_CPU_FREQ
+
+static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct s3c24xx_uart_port *port;
+ struct uart_port *uport;
+
+ port = container_of(nb, struct s3c24xx_uart_port, freq_transition);
+ uport = &port->port;
+
+ /* check to see if port is enabled */
+
+ if (port->pm_level != 0)
+ return 0;
+
+ /* try and work out if the baudrate is changing, we can detect
+ * a change in rate, but we do not have support for detecting
+ * a disturbance in the clock-rate over the change.
+ */
+
+ if (IS_ERR(port->clk))
+ goto exit;
+
+ if (port->baudclk_rate == clk_get_rate(port->clk))
+ goto exit;
+
+ if (val == CPUFREQ_PRECHANGE) {
+ /* we should really shut the port down whilst the
+ * frequency change is in progress. */
+
+ } else if (val == CPUFREQ_POSTCHANGE) {
+ struct ktermios *termios;
+ struct tty_struct *tty;
+
+ if (uport->info == NULL)
+ goto exit;
+
+ tty = uport->info->port.tty;
+
+ if (tty == NULL)
+ goto exit;
+
+ termios = tty->termios;
+
+ if (termios == NULL) {
+ printk(KERN_WARNING "%s: no termios?\n", __func__);
+ goto exit;
+ }
+
+ s3c24xx_serial_set_termios(uport, termios, NULL);
+ }
+
+ exit:
+ return 0;
+}
+
+static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
+{
+ port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition;
+
+ return cpufreq_register_notifier(&port->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
+{
+ cpufreq_unregister_notifier(&port->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
+{
+ return 0;
+}
+
+static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
+{
+}
+#endif
+
/* s3c24xx_serial_init_port
*
* initialise a single serial port from the platform device given
@@ -914,8 +1008,11 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
if (port->mapbase != 0)
return 0;
- if (cfg->hwport > 3)
- return -EINVAL;
+ if (cfg->hwport > CONFIG_SERIAL_SAMSUNG_UARTS) {
+ printk(KERN_ERR "%s: port %d bigger than %d\n", __func__,
+ cfg->hwport, CONFIG_SERIAL_SAMSUNG_UARTS);
+ return -ERANGE;
+ }
/* setup info for port */
port->dev = &platdev->dev;
@@ -943,18 +1040,26 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
- port->mapbase = res->start;
- port->membase = S3C24XX_VA_UART + (res->start - S3C24XX_PA_UART);
+ port->mapbase = res->start;
+ port->membase = S3C_VA_UART + res->start - (S3C_PA_UART & 0xfff00000);
ret = platform_get_irq(platdev, 0);
if (ret < 0)
port->irq = 0;
- else
+ else {
port->irq = ret;
+ ourport->rx_irq = ret;
+ ourport->tx_irq = ret + 1;
+ }
+
+ ret = platform_get_irq(platdev, 1);
+ if (ret > 0)
+ ourport->tx_irq = ret;
ourport->clk = clk_get(&platdev->dev, "uart");
- dbg("port: map=%08x, mem=%08x, irq=%d, clock=%ld\n",
- port->mapbase, port->membase, port->irq, port->uartclk);
+ dbg("port: map=%08x, mem=%08x, irq=%d (%d,%d), clock=%ld\n",
+ port->mapbase, port->membase, port->irq,
+ ourport->rx_irq, ourport->tx_irq, port->uartclk);
/* reset the fifos (and setup the uart) */
s3c24xx_serial_resetport(port, cfg);
@@ -1002,6 +1107,10 @@ int s3c24xx_serial_probe(struct platform_device *dev,
if (ret < 0)
printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__);
+ ret = s3c24xx_serial_cpufreq_register(ourport);
+ if (ret < 0)
+ dev_err(&dev->dev, "failed to add cpufreq notifier\n");
+
return 0;
probe_err:
@@ -1015,6 +1124,7 @@ int s3c24xx_serial_remove(struct platform_device *dev)
struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
if (port) {
+ s3c24xx_serial_cpufreq_deregister(to_ourport(port));
device_remove_file(&dev->dev, &dev_attr_clock_source);
uart_remove_one_port(&s3c24xx_uart_drv, port);
}
@@ -1219,7 +1329,7 @@ static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info)
platdev_ptr = s3c24xx_uart_devs;
- for (i = 0; i < NR_PORTS; i++, ptr++, platdev_ptr++) {
+ for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) {
s3c24xx_serial_init_port(ptr, info, *platdev_ptr);
}
@@ -1240,7 +1350,7 @@ s3c24xx_serial_console_setup(struct console *co, char *options)
/* is this a valid port */
- if (co->index == -1 || co->index >= NR_PORTS)
+ if (co->index == -1 || co->index >= CONFIG_SERIAL_SAMSUNG_UARTS)
co->index = 0;
port = &s3c24xx_serial_ports[co->index].port;