diff options
Diffstat (limited to 'drivers/serial/8250.c')
| -rw-r--r-- | drivers/serial/8250.c | 15 |
1 files changed, 15 insertions, 0 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index b4b39811b445..a0127e93ade0 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -137,6 +137,7 @@ struct uart_8250_port { unsigned char mcr; unsigned char mcr_mask; /* mask of user bits */ unsigned char mcr_force; /* mask of forced bits */ + unsigned char cur_iotype; /* Running I/O type */ /* * Some bits in registers are cleared on a read, so they must @@ -471,6 +472,7 @@ static void io_serial_out(struct uart_port *p, int offset, int value) static void set_io_from_upio(struct uart_port *p) { + struct uart_8250_port *up = (struct uart_8250_port *)p; switch (p->iotype) { case UPIO_HUB6: p->serial_in = hub6_serial_in; @@ -509,6 +511,8 @@ static void set_io_from_upio(struct uart_port *p) p->serial_out = io_serial_out; break; } + /* Remember loaded iotype */ + up->cur_iotype = p->iotype; } static void @@ -1937,6 +1941,9 @@ static int serial8250_startup(struct uart_port *port) up->capabilities = uart_config[up->port.type].flags; up->mcr = 0; + if (up->port.iotype != up->cur_iotype) + set_io_from_upio(port); + if (up->port.type == PORT_16C950) { /* Wake up and initialize UART */ up->acr = 0; @@ -2563,6 +2570,9 @@ static void serial8250_config_port(struct uart_port *port, int flags) if (ret < 0) probeflags &= ~PROBE_RSA; + if (up->port.iotype != up->cur_iotype) + set_io_from_upio(port); + if (flags & UART_CONFIG_TYPE) autoconfig(up, probeflags); if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) @@ -2671,6 +2681,11 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev) { int i; + for (i = 0; i < nr_uarts; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + up->cur_iotype = 0xFF; + } + serial8250_isa_init_ports(); for (i = 0; i < nr_uarts; i++) { |