diff options
Diffstat (limited to 'drivers/scsi')
| -rw-r--r-- | drivers/scsi/ufs/ufs.h | 31 | ||||
| -rw-r--r-- | drivers/scsi/ufs/ufs_quirks.h | 139 | ||||
| -rw-r--r-- | drivers/scsi/ufs/ufshcd.c | 71 | ||||
| -rw-r--r-- | drivers/scsi/ufs/ufshcd.h | 3 |
4 files changed, 244 insertions, 0 deletions
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h index aacb23521ef0..8ec63566d71d 100644 --- a/drivers/scsi/ufs/ufs.h +++ b/drivers/scsi/ufs/ufs.h @@ -196,6 +196,37 @@ enum unit_desc_param { UNIT_DESC_PARAM_LARGE_UNIT_SIZE_M1 = 0x22, }; +/* Device descriptor parameters offsets in bytes*/ +enum device_desc_param { + DEVICE_DESC_PARAM_LEN = 0x0, + DEVICE_DESC_PARAM_TYPE = 0x1, + DEVICE_DESC_PARAM_DEVICE_TYPE = 0x2, + DEVICE_DESC_PARAM_DEVICE_CLASS = 0x3, + DEVICE_DESC_PARAM_DEVICE_SUB_CLASS = 0x4, + DEVICE_DESC_PARAM_PRTCL = 0x5, + DEVICE_DESC_PARAM_NUM_LU = 0x6, + DEVICE_DESC_PARAM_NUM_WLU = 0x7, + DEVICE_DESC_PARAM_BOOT_ENBL = 0x8, + DEVICE_DESC_PARAM_DESC_ACCSS_ENBL = 0x9, + DEVICE_DESC_PARAM_INIT_PWR_MODE = 0xA, + DEVICE_DESC_PARAM_HIGH_PR_LUN = 0xB, + DEVICE_DESC_PARAM_SEC_RMV_TYPE = 0xC, + DEVICE_DESC_PARAM_SEC_LU = 0xD, + DEVICE_DESC_PARAM_BKOP_TERM_LT = 0xE, + DEVICE_DESC_PARAM_ACTVE_ICC_LVL = 0xF, + DEVICE_DESC_PARAM_SPEC_VER = 0x10, + DEVICE_DESC_PARAM_MANF_DATE = 0x12, + DEVICE_DESC_PARAM_MANF_NAME = 0x14, + DEVICE_DESC_PARAM_PRDCT_NAME = 0x15, + DEVICE_DESC_PARAM_SN = 0x16, + DEVICE_DESC_PARAM_OEM_ID = 0x17, + DEVICE_DESC_PARAM_MANF_ID = 0x18, + DEVICE_DESC_PARAM_UD_OFFSET = 0x1A, + DEVICE_DESC_PARAM_UD_LEN = 0x1B, + DEVICE_DESC_PARAM_RTT_CAP = 0x1C, + DEVICE_DESC_PARAM_FRQ_RTC = 0x1D, +}; + /* * Logical Unit Write Protect * 00h: LU not write protected diff --git a/drivers/scsi/ufs/ufs_quirks.h b/drivers/scsi/ufs/ufs_quirks.h new file mode 100644 index 000000000000..62ebd89fd787 --- /dev/null +++ b/drivers/scsi/ufs/ufs_quirks.h @@ -0,0 +1,139 @@ +/* + * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _UFS_QUIRKS_H_ +#define _UFS_QUIRKS_H_ + +/* return true if s1 is a prefix of s2 */ +#define STR_PRFX_EQUAL(s1, s2) !strncmp(s1, s2, strlen(s1)) + +#define UFS_ANY_VENDOR -1 +#define UFS_ANY_MODEL "ANY_MODEL" + +#define MAX_MODEL_LEN 16 + +#define UFS_VENDOR_TOSHIBA 0x198 +#define UFS_VENDOR_SAMSUNG 0x1CE + +/** + * ufs_device_info - ufs device details + * @wmanufacturerid: card details + * @model: card model + */ +struct ufs_device_info { + u16 wmanufacturerid; + char model[MAX_MODEL_LEN + 1]; +}; + +/** + * ufs_dev_fix - ufs device quirk info + * @card: ufs card details + * @quirk: device quirk + */ +struct ufs_dev_fix { + struct ufs_device_info card; + unsigned int quirk; +}; + +#define END_FIX { { 0 }, 0 } + +/* add specific device quirk */ +#define UFS_FIX(_vendor, _model, _quirk) \ + { \ + .card.wmanufacturerid = (_vendor),\ + .card.model = (_model), \ + .quirk = (_quirk), \ + } + +/* + * If UFS device is having issue in processing LCC (Line Control + * Command) coming from UFS host controller then enable this quirk. + * When this quirk is enabled, host controller driver should disable + * the LCC transmission on UFS host controller (by clearing + * TX_LCC_ENABLE attribute of host to 0). + */ +#define UFS_DEVICE_QUIRK_BROKEN_LCC (1 << 0) + +/* + * Some UFS devices don't need VCCQ rail for device operations. Enabling this + * quirk for such devices will make sure that VCCQ rail is not voted. + */ +#define UFS_DEVICE_NO_VCCQ (1 << 1) + +/* + * Some vendor's UFS device sends back to back NACs for the DL data frames + * causing the host controller to raise the DFES error status. Sometimes + * such UFS devices send back to back NAC without waiting for new + * retransmitted DL frame from the host and in such cases it might be possible + * the Host UniPro goes into bad state without raising the DFES error + * interrupt. If this happens then all the pending commands would timeout + * only after respective SW command (which is generally too large). + * + * We can workaround such device behaviour like this: + * - As soon as SW sees the DL NAC error, it should schedule the error handler + * - Error handler would sleep for 50ms to see if there are any fatal errors + * raised by UFS controller. + * - If there are fatal errors then SW does normal error recovery. + * - If there are no fatal errors then SW sends the NOP command to device + * to check if link is alive. + * - If NOP command times out, SW does normal error recovery + * - If NOP command succeed, skip the error handling. + * + * If DL NAC error is seen multiple times with some vendor's UFS devices then + * enable this quirk to initiate quick error recovery and also silence related + * error logs to reduce spamming of kernel logs. + */ +#define UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS (1 << 2) + +/* + * Some UFS devices may not work properly after resume if the link was kept + * in off state during suspend. Enabling this quirk will not allow the + * link to be kept in off state during suspend. + */ +#define UFS_DEVICE_QUIRK_NO_LINK_OFF (1 << 3) + +/* + * Few Toshiba UFS device models advertise RX_MIN_ACTIVATETIME_CAPABILITY as + * 600us which may not be enough for reliable hibern8 exit hardware sequence + * from UFS device. + * To workaround this issue, host should set its PA_TACTIVATE time to 1ms even + * if device advertises RX_MIN_ACTIVATETIME_CAPABILITY less than 1ms. + */ +#define UFS_DEVICE_QUIRK_PA_TACTIVATE (1 << 4) + +/* + * Some UFS memory devices may have really low read/write throughput in + * FAST AUTO mode, enable this quirk to make sure that FAST AUTO mode is + * never enabled for such devices. + */ +#define UFS_DEVICE_NO_FASTAUTO (1 << 5) + +struct ufs_hba; +void ufs_advertise_fixup_device(struct ufs_hba *hba); + +static struct ufs_dev_fix ufs_fixups[] = { + /* UFS cards deviations table */ + UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ), + UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL, + UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS), + UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL, + UFS_DEVICE_NO_FASTAUTO), + UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9C8KBADG", + UFS_DEVICE_QUIRK_PA_TACTIVATE), + UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9D8KBADG", + UFS_DEVICE_QUIRK_PA_TACTIVATE), + + END_FIX +}; +#endif /* UFS_QUIRKS_H_ */ diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index e2ed41587f56..f8b458fb258a 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -42,6 +42,7 @@ #include <linux/nls.h> #include <linux/of.h> #include "ufshcd.h" +#include "ufs_quirks.h" #include "unipro.h" #define UFSHCD_ENABLE_INTRS (UTP_TRANSFER_REQ_COMPL |\ @@ -4564,6 +4565,75 @@ out: return ret; } +static int ufs_get_device_info(struct ufs_hba *hba, + struct ufs_device_info *card_data) +{ + int err; + u8 model_index; + u8 str_desc_buf[QUERY_DESC_STRING_MAX_SIZE + 1] = {0}; + u8 desc_buf[QUERY_DESC_DEVICE_MAX_SIZE]; + + err = ufshcd_read_device_desc(hba, desc_buf, + QUERY_DESC_DEVICE_MAX_SIZE); + if (err) { + dev_err(hba->dev, "%s: Failed reading Device Desc. err = %d\n", + __func__, err); + goto out; + } + + /* + * getting vendor (manufacturerID) and Bank Index in big endian + * format + */ + card_data->wmanufacturerid = desc_buf[DEVICE_DESC_PARAM_MANF_ID] << 8 | + desc_buf[DEVICE_DESC_PARAM_MANF_ID + 1]; + + model_index = desc_buf[DEVICE_DESC_PARAM_PRDCT_NAME]; + + err = ufshcd_read_string_desc(hba, model_index, str_desc_buf, + QUERY_DESC_STRING_MAX_SIZE, ASCII_STD); + if (err) { + dev_err(hba->dev, "%s: Failed reading Product Name. err = %d\n", + __func__, err); + goto out; + } + + str_desc_buf[QUERY_DESC_STRING_MAX_SIZE] = '\0'; + strlcpy(card_data->model, (str_desc_buf + QUERY_DESC_HDR_SIZE), + min_t(u8, str_desc_buf[QUERY_DESC_LENGTH_OFFSET], + MAX_MODEL_LEN)); + + /* Null terminate the model string */ + card_data->model[MAX_MODEL_LEN] = '\0'; + +out: + return err; +} + +void ufs_advertise_fixup_device(struct ufs_hba *hba) +{ + int err; + struct ufs_dev_fix *f; + struct ufs_device_info card_data; + + card_data.wmanufacturerid = 0; + + err = ufs_get_device_info(hba, &card_data); + if (err) { + dev_err(hba->dev, "%s: Failed getting device info. err = %d\n", + __func__, err); + return; + } + + for (f = ufs_fixups; f->quirk; f++) { + if (((f->card.wmanufacturerid == card_data.wmanufacturerid) || + (f->card.wmanufacturerid == UFS_ANY_VENDOR)) && + (STR_PRFX_EQUAL(f->card.model, card_data.model) || + !strcmp(f->card.model, UFS_ANY_MODEL))) + hba->dev_quirks |= f->quirk; + } +} + /** * ufshcd_probe_hba - probe hba to detect device and initialize * @hba: per-adapter instance @@ -4591,6 +4661,7 @@ static int ufshcd_probe_hba(struct ufs_hba *hba) if (ret) goto out; + ufs_advertise_fixup_device(hba); /* UFS device is also active now */ ufshcd_set_ufs_dev_active(hba); ufshcd_force_reset_auto_bkops(hba); diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index 54e13ccb5754..77e79c00ef8c 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -470,6 +470,9 @@ struct ufs_hba { unsigned int quirks; /* Deviations from standard UFSHCI spec. */ + /* Device deviations from standard UFS device spec. */ + unsigned int dev_quirks; + wait_queue_head_t tm_wq; wait_queue_head_t tm_tag_wq; unsigned long tm_condition; |