diff options
Diffstat (limited to 'drivers/scsi')
| -rw-r--r-- | drivers/scsi/NCR5380.c | 204 | ||||
| -rw-r--r-- | drivers/scsi/atari_NCR5380.c | 106 |
2 files changed, 155 insertions, 155 deletions
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c index f674420c131d..eb21803eab3b 100644 --- a/drivers/scsi/NCR5380.c +++ b/drivers/scsi/NCR5380.c @@ -1,15 +1,15 @@ /* * NCR 5380 generic driver routines. These should make it *trivial* - * to implement 5380 SCSI drivers under Linux with a non-trantor - * architecture. + * to implement 5380 SCSI drivers under Linux with a non-trantor + * architecture. * - * Note that these routines also work with NR53c400 family chips. + * Note that these routines also work with NR53c400 family chips. * * Copyright 1993, Drew Eckhardt - * Visionary Computing - * (Unix and Linux consulting and custom programming) - * drew@colorado.edu - * +1 (303) 666-5836 + * Visionary Computing + * (Unix and Linux consulting and custom programming) + * drew@colorado.edu + * +1 (303) 666-5836 * * For more information, please consult * @@ -32,15 +32,15 @@ /* * Further development / testing that should be done : * 1. Cleanup the NCR5380_transfer_dma function and DMA operation complete - * code so that everything does the same thing that's done at the - * end of a pseudo-DMA read operation. + * code so that everything does the same thing that's done at the + * end of a pseudo-DMA read operation. * * 2. Fix REAL_DMA (interrupt driven, polled works fine) - - * basically, transfer size needs to be reduced by one - * and the last byte read as is done with PSEUDO_DMA. + * basically, transfer size needs to be reduced by one + * and the last byte read as is done with PSEUDO_DMA. * * 4. Test SCSI-II tagged queueing (I have no devices which support - * tagged queueing) + * tagged queueing) */ #ifndef notyet @@ -118,24 +118,24 @@ * * These macros control options : * AUTOPROBE_IRQ - if defined, the NCR5380_probe_irq() function will be - * defined. + * defined. * * AUTOSENSE - if defined, REQUEST SENSE will be performed automatically - * for commands that return with a CHECK CONDITION status. + * for commands that return with a CHECK CONDITION status. * * DIFFERENTIAL - if defined, NCR53c81 chips will use external differential - * transceivers. + * transceivers. * * DONT_USE_INTR - if defined, never use interrupts, even if we probe or - * override-configure an IRQ. + * override-configure an IRQ. * * PSEUDO_DMA - if defined, PSEUDO DMA is used during the data transfer phases. * * REAL_DMA - if defined, REAL DMA is used during the data transfer phases. * * REAL_DMA_POLL - if defined, REAL DMA is used but the driver doesn't - * rely on phase mismatch and EOP interrupts to determine end - * of phase. + * rely on phase mismatch and EOP interrupts to determine end + * of phase. * * These macros MUST be defined : * @@ -144,17 +144,17 @@ * NCR5380_write(register, value) - write to the specific register * * NCR5380_implementation_fields - additional fields needed for this - * specific implementation of the NCR5380 + * specific implementation of the NCR5380 * * Either real DMA *or* pseudo DMA may be implemented * REAL functions : * NCR5380_REAL_DMA should be defined if real DMA is to be used. * Note that the DMA setup functions should return the number of bytes - * that they were able to program the controller for. + * that they were able to program the controller for. * * Also note that generic i386/PC versions of these macros are - * available as NCR5380_i386_dma_write_setup, - * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual. + * available as NCR5380_i386_dma_write_setup, + * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual. * * NCR5380_dma_write_setup(instance, src, count) - initialize * NCR5380_dma_read_setup(instance, dst, count) - initialize @@ -174,10 +174,10 @@ static int do_abort(struct Scsi_Host *); static void do_reset(struct Scsi_Host *); /** - * initialize_SCp - init the scsi pointer field - * @cmd: command block to set up + * initialize_SCp - init the scsi pointer field + * @cmd: command block to set up * - * Set up the internal fields in the SCSI command. + * Set up the internal fields in the SCSI command. */ static inline void initialize_SCp(struct scsi_cmnd *cmd) @@ -318,10 +318,10 @@ mrs[] = { }; /** - * NCR5380_print - print scsi bus signals - * @instance: adapter state to dump + * NCR5380_print - print scsi bus signals + * @instance: adapter state to dump * - * Print the SCSI bus signals for debugging purposes + * Print the SCSI bus signals for debugging purposes */ static void NCR5380_print(struct Scsi_Host *instance) @@ -355,10 +355,10 @@ static void NCR5380_print(struct Scsi_Host *instance) /** - * NCR5380_print_phase - show SCSI phase - * @instance: adapter to dump + * NCR5380_print_phase - show SCSI phase + * @instance: adapter to dump * - * Print the current SCSI phase for debugging purposes + * Print the current SCSI phase for debugging purposes */ static void NCR5380_print_phase(struct Scsi_Host *instance) @@ -380,13 +380,13 @@ static void NCR5380_print_phase(struct Scsi_Host *instance) static int probe_irq __initdata; /** - * probe_intr - helper for IRQ autoprobe - * @irq: interrupt number - * @dev_id: unused - * @regs: unused + * probe_intr - helper for IRQ autoprobe + * @irq: interrupt number + * @dev_id: unused + * @regs: unused * - * Set a flag to indicate the IRQ in question was received. This is - * used by the IRQ probe code. + * Set a flag to indicate the IRQ in question was received. This is + * used by the IRQ probe code. */ static irqreturn_t __init probe_intr(int irq, void *dev_id) @@ -396,12 +396,12 @@ static irqreturn_t __init probe_intr(int irq, void *dev_id) } /** - * NCR5380_probe_irq - find the IRQ of an NCR5380 - * @instance: NCR5380 controller - * @possible: bitmask of ISA IRQ lines + * NCR5380_probe_irq - find the IRQ of an NCR5380 + * @instance: NCR5380 controller + * @possible: bitmask of ISA IRQ lines * - * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ - * and then looking to see what interrupt actually turned up. + * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ + * and then looking to see what interrupt actually turned up. */ static int __init __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance, @@ -447,10 +447,10 @@ static int __init __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance, } /** - * NCR58380_info - report driver and host information - * @instance: relevant scsi host instance + * NCR58380_info - report driver and host information + * @instance: relevant scsi host instance * - * For use as the host template info() handler. + * For use as the host template info() handler. */ static const char *NCR5380_info(struct Scsi_Host *instance) @@ -522,17 +522,17 @@ static int __maybe_unused NCR5380_show_info(struct seq_file *m, #endif /** - * NCR5380_init - initialise an NCR5380 - * @instance: adapter to configure - * @flags: control flags + * NCR5380_init - initialise an NCR5380 + * @instance: adapter to configure + * @flags: control flags * - * Initializes *instance and corresponding 5380 chip, - * with flags OR'd into the initial flags value. + * Initializes *instance and corresponding 5380 chip, + * with flags OR'd into the initial flags value. * - * Notes : I assume that the host, hostno, and id bits have been - * set correctly. I don't care about the irq and other fields. + * Notes : I assume that the host, hostno, and id bits have been + * set correctly. I don't care about the irq and other fields. * - * Returns 0 for success + * Returns 0 for success */ static int NCR5380_init(struct Scsi_Host *instance, int flags) @@ -648,8 +648,8 @@ static int NCR5380_maybe_reset_bus(struct Scsi_Host *instance) } /** - * NCR5380_exit - remove an NCR5380 - * @instance: adapter to remove + * NCR5380_exit - remove an NCR5380 + * @instance: adapter to remove */ static void NCR5380_exit(struct Scsi_Host *instance) @@ -801,12 +801,12 @@ static void requeue_cmd(struct Scsi_Host *instance, struct scsi_cmnd *cmd) } /** - * NCR5380_main - NCR state machines + * NCR5380_main - NCR state machines * - * NCR5380_main is a coroutine that runs as long as more work can - * be done on the NCR5380 host adapters in a system. Both - * NCR5380_queue_command() and NCR5380_intr() will try to start it - * in case it is not running. + * NCR5380_main is a coroutine that runs as long as more work can + * be done on the NCR5380 host adapters in a system. Both + * NCR5380_queue_command() and NCR5380_intr() will try to start it + * in case it is not running. */ static void NCR5380_main(struct work_struct *work) @@ -979,31 +979,31 @@ static irqreturn_t NCR5380_intr(int irq, void *dev_id) /* * Function : int NCR5380_select(struct Scsi_Host *instance, - * struct scsi_cmnd *cmd) + * struct scsi_cmnd *cmd) * * Purpose : establishes I_T_L or I_T_L_Q nexus for new or existing command, - * including ARBITRATION, SELECTION, and initial message out for - * IDENTIFY and queue messages. + * including ARBITRATION, SELECTION, and initial message out for + * IDENTIFY and queue messages. * * Inputs : instance - instantiation of the 5380 driver on which this - * target lives, cmd - SCSI command to execute. + * target lives, cmd - SCSI command to execute. * * Returns cmd if selection failed but should be retried, * NULL if selection failed and should not be retried, or * NULL if selection succeeded (hostdata->connected == cmd). * * Side effects : - * If bus busy, arbitration failed, etc, NCR5380_select() will exit - * with registers as they should have been on entry - ie - * SELECT_ENABLE will be set appropriately, the NCR5380 - * will cease to drive any SCSI bus signals. + * If bus busy, arbitration failed, etc, NCR5380_select() will exit + * with registers as they should have been on entry - ie + * SELECT_ENABLE will be set appropriately, the NCR5380 + * will cease to drive any SCSI bus signals. * - * If successful : I_T_L or I_T_L_Q nexus will be established, - * instance->connected will be set to cmd. - * SELECT interrupt will be disabled. + * If successful : I_T_L or I_T_L_Q nexus will be established, + * instance->connected will be set to cmd. + * SELECT interrupt will be disabled. * - * If failed (no target) : cmd->scsi_done() will be called, and the - * cmd->result host byte set to DID_BAD_TARGET. + * If failed (no target) : cmd->scsi_done() will be called, and the + * cmd->result host byte set to DID_BAD_TARGET. */ static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance, @@ -1212,8 +1212,8 @@ static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance, * until it wraps back to 0. * * XXX - it turns out that there are some broken SCSI-II devices, - * which claim to support tagged queuing but fail when more than - * some number of commands are issued at once. + * which claim to support tagged queuing but fail when more than + * some number of commands are issued at once. */ /* Wait for start of REQ/ACK handshake */ @@ -1261,19 +1261,19 @@ out: /* * Function : int NCR5380_transfer_pio (struct Scsi_Host *instance, - * unsigned char *phase, int *count, unsigned char **data) + * unsigned char *phase, int *count, unsigned char **data) * * Purpose : transfers data in given phase using polled I/O * * Inputs : instance - instance of driver, *phase - pointer to - * what phase is expected, *count - pointer to number of - * bytes to transfer, **data - pointer to data pointer. + * what phase is expected, *count - pointer to number of + * bytes to transfer, **data - pointer to data pointer. * * Returns : -1 when different phase is entered without transferring - * maximum number of bytes, 0 if all bytes or transferred or exit - * is in same phase. + * maximum number of bytes, 0 if all bytes or transferred or exit + * is in same phase. * - * Also, *phase, *count, *data are modified in place. + * Also, *phase, *count, *data are modified in place. * * XXX Note : handling for bus free may be useful. */ @@ -1353,11 +1353,11 @@ static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase /* * We have several special cases to consider during REQ/ACK handshaking : * 1. We were in MSGOUT phase, and we are on the last byte of the - * message. ATN must be dropped as ACK is dropped. + * message. ATN must be dropped as ACK is dropped. * * 2. We are in a MSGIN phase, and we are on the last byte of the - * message. We must exit with ACK asserted, so that the calling - * code may raise ATN before dropping ACK to reject the message. + * message. We must exit with ACK asserted, so that the calling + * code may raise ATN before dropping ACK to reject the message. * * 3. ACK and ATN are clear and the target may proceed as normal. */ @@ -1478,20 +1478,20 @@ timeout: #if defined(REAL_DMA) || defined(PSEUDO_DMA) || defined (REAL_DMA_POLL) /* * Function : int NCR5380_transfer_dma (struct Scsi_Host *instance, - * unsigned char *phase, int *count, unsigned char **data) + * unsigned char *phase, int *count, unsigned char **data) * * Purpose : transfers data in given phase using either real - * or pseudo DMA. + * or pseudo DMA. * * Inputs : instance - instance of driver, *phase - pointer to - * what phase is expected, *count - pointer to number of - * bytes to transfer, **data - pointer to data pointer. + * what phase is expected, *count - pointer to number of + * bytes to transfer, **data - pointer to data pointer. * * Returns : -1 when different phase is entered without transferring - * maximum number of bytes, 0 if all bytes or transferred or exit - * is in same phase. + * maximum number of bytes, 0 if all bytes or transferred or exit + * is in same phase. * - * Also, *phase, *count, *data are modified in place. + * Also, *phase, *count, *data are modified in place. */ @@ -1547,8 +1547,8 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase dprintk(NDEBUG_DMA, "scsi%d : mode reg = 0x%X\n", instance->host_no, NCR5380_read(MODE_REG)); /* - * On the PAS16 at least I/O recovery delays are not needed here. - * Everyone else seems to want them. + * On the PAS16 at least I/O recovery delays are not needed here. + * Everyone else seems to want them. */ if (p & SR_IO) { @@ -1724,17 +1724,17 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase * Function : NCR5380_information_transfer (struct Scsi_Host *instance) * * Purpose : run through the various SCSI phases and do as the target - * directs us to. Operates on the currently connected command, - * instance->connected. + * directs us to. Operates on the currently connected command, + * instance->connected. * * Inputs : instance, instance for which we are doing commands * * Side effects : SCSI things happen, the disconnected queue will be - * modified if a command disconnects, *instance->connected will - * change. + * modified if a command disconnects, *instance->connected will + * change. * * XXX Note : we need to watch for bus free or a reset condition here - * to recover from an unexpected bus free condition. + * to recover from an unexpected bus free condition. */ static void NCR5380_information_transfer(struct Scsi_Host *instance) { @@ -2050,8 +2050,8 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) { * Function : void NCR5380_reselect (struct Scsi_Host *instance) * * Purpose : does reselection, initializing the instance->connected - * field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q - * nexus has been reestablished, + * field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q + * nexus has been reestablished, * * Inputs : instance - this instance of the NCR5380. */ @@ -2172,12 +2172,12 @@ static void NCR5380_reselect(struct Scsi_Host *instance) { * Function : void NCR5380_dma_complete (struct Scsi_Host *instance) * * Purpose : called by interrupt handler when DMA finishes or a phase - * mismatch occurs (which would finish the DMA transfer). + * mismatch occurs (which would finish the DMA transfer). * * Inputs : instance - this instance of the NCR5380. * * Returns : pointer to the scsi_cmnd structure for which the I_T_L - * nexus has been reestablished, on failure NULL is returned. + * nexus has been reestablished, on failure NULL is returned. */ #ifdef REAL_DMA diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c index aeaeea5169e4..b66ea632c76b 100644 --- a/drivers/scsi/atari_NCR5380.c +++ b/drivers/scsi/atari_NCR5380.c @@ -1,15 +1,15 @@ /* * NCR 5380 generic driver routines. These should make it *trivial* - * to implement 5380 SCSI drivers under Linux with a non-trantor - * architecture. + * to implement 5380 SCSI drivers under Linux with a non-trantor + * architecture. * - * Note that these routines also work with NR53c400 family chips. + * Note that these routines also work with NR53c400 family chips. * * Copyright 1993, Drew Eckhardt - * Visionary Computing - * (Unix and Linux consulting and custom programming) - * drew@colorado.edu - * +1 (303) 666-5836 + * Visionary Computing + * (Unix and Linux consulting and custom programming) + * drew@colorado.edu + * +1 (303) 666-5836 * * For more information, please consult * @@ -93,10 +93,10 @@ * * These macros control options : * AUTOSENSE - if defined, REQUEST SENSE will be performed automatically - * for commands that return with a CHECK CONDITION status. + * for commands that return with a CHECK CONDITION status. * * DIFFERENTIAL - if defined, NCR53c81 chips will use external differential - * transceivers. + * transceivers. * * REAL_DMA - if defined, REAL DMA is used during the data transfer phases. * @@ -109,17 +109,17 @@ * NCR5380_write(register, value) - write to the specific register * * NCR5380_implementation_fields - additional fields needed for this - * specific implementation of the NCR5380 + * specific implementation of the NCR5380 * * Either real DMA *or* pseudo DMA may be implemented * REAL functions : * NCR5380_REAL_DMA should be defined if real DMA is to be used. * Note that the DMA setup functions should return the number of bytes - * that they were able to program the controller for. + * that they were able to program the controller for. * * Also note that generic i386/PC versions of these macros are - * available as NCR5380_i386_dma_write_setup, - * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual. + * available as NCR5380_i386_dma_write_setup, + * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual. * * NCR5380_dma_write_setup(instance, src, count) - initialize * NCR5380_dma_read_setup(instance, dst, count) - initialize @@ -974,7 +974,7 @@ static void NCR5380_main(struct work_struct *work) * Function : void NCR5380_dma_complete (struct Scsi_Host *instance) * * Purpose : Called by interrupt handler when DMA finishes or a phase - * mismatch occurs (which would finish the DMA transfer). + * mismatch occurs (which would finish the DMA transfer). * * Inputs : instance - this instance of the NCR5380. */ @@ -1161,31 +1161,31 @@ static irqreturn_t NCR5380_intr(int irq, void *dev_id) /* * Function : int NCR5380_select(struct Scsi_Host *instance, - * struct scsi_cmnd *cmd) + * struct scsi_cmnd *cmd) * * Purpose : establishes I_T_L or I_T_L_Q nexus for new or existing command, - * including ARBITRATION, SELECTION, and initial message out for - * IDENTIFY and queue messages. + * including ARBITRATION, SELECTION, and initial message out for + * IDENTIFY and queue messages. * * Inputs : instance - instantiation of the 5380 driver on which this - * target lives, cmd - SCSI command to execute. + * target lives, cmd - SCSI command to execute. * * Returns cmd if selection failed but should be retried, * NULL if selection failed and should not be retried, or * NULL if selection succeeded (hostdata->connected == cmd). * * Side effects : - * If bus busy, arbitration failed, etc, NCR5380_select() will exit - * with registers as they should have been on entry - ie - * SELECT_ENABLE will be set appropriately, the NCR5380 - * will cease to drive any SCSI bus signals. + * If bus busy, arbitration failed, etc, NCR5380_select() will exit + * with registers as they should have been on entry - ie + * SELECT_ENABLE will be set appropriately, the NCR5380 + * will cease to drive any SCSI bus signals. * - * If successful : I_T_L or I_T_L_Q nexus will be established, - * instance->connected will be set to cmd. - * SELECT interrupt will be disabled. + * If successful : I_T_L or I_T_L_Q nexus will be established, + * instance->connected will be set to cmd. + * SELECT interrupt will be disabled. * - * If failed (no target) : cmd->scsi_done() will be called, and the - * cmd->result host byte set to DID_BAD_TARGET. + * If failed (no target) : cmd->scsi_done() will be called, and the + * cmd->result host byte set to DID_BAD_TARGET. */ static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance, @@ -1398,8 +1398,8 @@ static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance, * until it wraps back to 0. * * XXX - it turns out that there are some broken SCSI-II devices, - * which claim to support tagged queuing but fail when more than - * some number of commands are issued at once. + * which claim to support tagged queuing but fail when more than + * some number of commands are issued at once. */ /* Wait for start of REQ/ACK handshake */ @@ -1461,19 +1461,19 @@ out: /* * Function : int NCR5380_transfer_pio (struct Scsi_Host *instance, - * unsigned char *phase, int *count, unsigned char **data) + * unsigned char *phase, int *count, unsigned char **data) * * Purpose : transfers data in given phase using polled I/O * * Inputs : instance - instance of driver, *phase - pointer to - * what phase is expected, *count - pointer to number of - * bytes to transfer, **data - pointer to data pointer. + * what phase is expected, *count - pointer to number of + * bytes to transfer, **data - pointer to data pointer. * * Returns : -1 when different phase is entered without transferring - * maximum number of bytes, 0 if all bytes are transferred or exit - * is in same phase. + * maximum number of bytes, 0 if all bytes are transferred or exit + * is in same phase. * - * Also, *phase, *count, *data are modified in place. + * Also, *phase, *count, *data are modified in place. * * XXX Note : handling for bus free may be useful. */ @@ -1560,11 +1560,11 @@ static int NCR5380_transfer_pio(struct Scsi_Host *instance, /* * We have several special cases to consider during REQ/ACK handshaking : * 1. We were in MSGOUT phase, and we are on the last byte of the - * message. ATN must be dropped as ACK is dropped. + * message. ATN must be dropped as ACK is dropped. * * 2. We are in a MSGIN phase, and we are on the last byte of the - * message. We must exit with ACK asserted, so that the calling - * code may raise ATN before dropping ACK to reject the message. + * message. We must exit with ACK asserted, so that the calling + * code may raise ATN before dropping ACK to reject the message. * * 3. ACK and ATN are clear and the target may proceed as normal. */ @@ -1687,20 +1687,20 @@ timeout: #if defined(REAL_DMA) /* * Function : int NCR5380_transfer_dma (struct Scsi_Host *instance, - * unsigned char *phase, int *count, unsigned char **data) + * unsigned char *phase, int *count, unsigned char **data) * * Purpose : transfers data in given phase using either real - * or pseudo DMA. + * or pseudo DMA. * * Inputs : instance - instance of driver, *phase - pointer to - * what phase is expected, *count - pointer to number of - * bytes to transfer, **data - pointer to data pointer. + * what phase is expected, *count - pointer to number of + * bytes to transfer, **data - pointer to data pointer. * * Returns : -1 when different phase is entered without transferring - * maximum number of bytes, 0 if all bytes or transferred or exit - * is in same phase. + * maximum number of bytes, 0 if all bytes or transferred or exit + * is in same phase. * - * Also, *phase, *count, *data are modified in place. + * Also, *phase, *count, *data are modified in place. */ @@ -1799,17 +1799,17 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, * Function : NCR5380_information_transfer (struct Scsi_Host *instance) * * Purpose : run through the various SCSI phases and do as the target - * directs us to. Operates on the currently connected command, - * instance->connected. + * directs us to. Operates on the currently connected command, + * instance->connected. * * Inputs : instance, instance for which we are doing commands * * Side effects : SCSI things happen, the disconnected queue will be - * modified if a command disconnects, *instance->connected will - * change. + * modified if a command disconnects, *instance->connected will + * change. * * XXX Note : we need to watch for bus free or a reset condition here - * to recover from an unexpected bus free condition. + * to recover from an unexpected bus free condition. */ static void NCR5380_information_transfer(struct Scsi_Host *instance) @@ -1919,7 +1919,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) */ /* ++roman: I suggest, this should be - * #if def(REAL_DMA) + * #if def(REAL_DMA) * instead of leaving REAL_DMA out. */ @@ -2215,8 +2215,8 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) * Function : void NCR5380_reselect (struct Scsi_Host *instance) * * Purpose : does reselection, initializing the instance->connected - * field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q - * nexus has been reestablished, + * field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q + * nexus has been reestablished, * * Inputs : instance - this instance of the NCR5380. */ |