summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/Kconfig2
-rw-r--r--drivers/scsi/advansys.c2
-rw-r--r--drivers/scsi/hosts.c11
-rw-r--r--drivers/scsi/hpsa.c2
-rw-r--r--drivers/scsi/mpt3sas/Kconfig9
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_scsih.c3
-rw-r--r--drivers/scsi/mvsas/mv_init.c4
-rw-r--r--drivers/scsi/qla2xxx/qla_nx.c3
-rw-r--r--drivers/scsi/scsi_debug.c9
-rw-r--r--drivers/scsi/scsi_scan.c9
-rw-r--r--drivers/scsi/scsi_sysfs.c8
-rw-r--r--drivers/scsi/sd.c69
-rw-r--r--drivers/scsi/sd.h1
-rw-r--r--drivers/scsi/st.c5
14 files changed, 100 insertions, 37 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 5f692ae40749..64eed87d34a8 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -364,6 +364,7 @@ config SCSI_HPSA
tristate "HP Smart Array SCSI driver"
depends on PCI && SCSI
select CHECK_SIGNATURE
+ select SCSI_SAS_ATTRS
help
This driver supports HP Smart Array Controllers (circa 2009).
It is a SCSI alternative to the cciss driver, which is a block
@@ -499,6 +500,7 @@ config SCSI_ADVANSYS
tristate "AdvanSys SCSI support"
depends on SCSI
depends on ISA || EISA || PCI
+ depends on ISA_DMA_API || !ISA
help
This is a driver for all SCSI host adapters manufactured by
AdvanSys. It is documented in the kernel source in
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 519f9a4b3dad..febbd83e2ecd 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -7803,7 +7803,7 @@ adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
return ASC_BUSY;
}
scsiqp->sense_addr = cpu_to_le32(sense_addr);
- scsiqp->sense_len = cpu_to_le32(SCSI_SENSE_BUFFERSIZE);
+ scsiqp->sense_len = SCSI_SENSE_BUFFERSIZE;
/* Build ADV_SCSI_REQ_Q */
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index 323982fd00c3..82ac1cd818ac 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -333,6 +333,17 @@ static void scsi_host_dev_release(struct device *dev)
kfree(queuedata);
}
+ if (shost->shost_state == SHOST_CREATED) {
+ /*
+ * Free the shost_dev device name here if scsi_host_alloc()
+ * and scsi_host_put() have been called but neither
+ * scsi_host_add() nor scsi_host_remove() has been called.
+ * This avoids that the memory allocated for the shost_dev
+ * name is leaked.
+ */
+ kfree(dev_name(&shost->shost_dev));
+ }
+
scsi_destroy_command_freelist(shost);
if (shost_use_blk_mq(shost)) {
if (shost->tag_set.tags)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 6a8f95808ee0..a3860367b568 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -8671,7 +8671,7 @@ static void hpsa_disable_rld_caching(struct ctlr_info *h)
if ((rc != 0) || (c->err_info->CommandStatus != 0))
goto errout;
- if (*options && HPSA_DIAG_OPTS_DISABLE_RLD_CACHING)
+ if (*options & HPSA_DIAG_OPTS_DISABLE_RLD_CACHING)
goto out;
errout:
diff --git a/drivers/scsi/mpt3sas/Kconfig b/drivers/scsi/mpt3sas/Kconfig
index 29061467cc17..b736dbc80485 100644
--- a/drivers/scsi/mpt3sas/Kconfig
+++ b/drivers/scsi/mpt3sas/Kconfig
@@ -71,3 +71,12 @@ config SCSI_MPT3SAS_MAX_SGE
MAX_PHYS_SEGMENTS in most kernels. However in SuSE kernels this
can be 256. However, it may decreased down to 16. Decreasing this
parameter will reduce memory requirements on a per controller instance.
+
+config SCSI_MPT2SAS
+ tristate "Legacy MPT2SAS config option"
+ default n
+ select SCSI_MPT3SAS
+ depends on PCI && SCSI
+ ---help---
+ Dummy config option for backwards compatiblity: configure the MPT3SAS
+ driver instead.
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index d95206b7e116..9ab77b06434d 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -3905,8 +3905,7 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
* We do not expose raid functionality to upper layer for warpdrive.
*/
if (!ioc->is_warpdrive && !scsih_is_raid(&scmd->device->sdev_gendev)
- && (sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) &&
- scmd->cmd_len != 32)
+ && sas_is_tlr_enabled(scmd->device) && scmd->cmd_len != 32)
mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON;
smid = mpt3sas_base_get_smid_scsiio(ioc, ioc->scsi_io_cb_idx, scmd);
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 90fdf0e859e3..675e7fab0796 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -758,7 +758,7 @@ mvs_store_interrupt_coalescing(struct device *cdev,
struct device_attribute *attr,
const char *buffer, size_t size)
{
- int val = 0;
+ unsigned int val = 0;
struct mvs_info *mvi = NULL;
struct Scsi_Host *shost = class_to_shost(cdev);
struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
@@ -766,7 +766,7 @@ mvs_store_interrupt_coalescing(struct device *cdev,
if (buffer == NULL)
return size;
- if (sscanf(buffer, "%d", &val) != 1)
+ if (sscanf(buffer, "%u", &val) != 1)
return -EINVAL;
if (val >= 0x10000) {
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index eb0cc5475c45..b6b4cfdd7620 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -433,7 +433,7 @@ qla82xx_pci_get_crb_addr_2M(struct qla_hw_data *ha, ulong off_in,
if (off_in < QLA82XX_PCI_CRBSPACE)
return -1;
- *off_out = (void __iomem *)(off_in - QLA82XX_PCI_CRBSPACE);
+ off_in -= QLA82XX_PCI_CRBSPACE;
/* Try direct map */
m = &crb_128M_2M_map[CRB_BLK(off_in)].sub_block[CRB_SUBBLK(off_in)];
@@ -443,6 +443,7 @@ qla82xx_pci_get_crb_addr_2M(struct qla_hw_data *ha, ulong off_in,
return 0;
}
/* Not in direct map, use crb window */
+ *off_out = (void __iomem *)off_in;
return 1;
}
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index dfcc45bb03b1..d09d60293c27 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -465,8 +465,9 @@ static const struct opcode_info_t opcode_info_arr[SDEB_I_LAST_ELEMENT + 1] = {
0} },
{0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* MAINT OUT */
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
- {0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* VERIFY */
- {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+ {0, 0x2f, 0, F_D_OUT_MAYBE | FF_DIRECT_IO, NULL, NULL, /* VERIFY(10) */
+ {10, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc7,
+ 0, 0, 0, 0, 0, 0} },
{1, 0x7f, 0x9, F_SA_HIGH | F_D_IN | FF_DIRECT_IO, resp_read_dt0,
vl_iarr, {32, 0xc7, 0, 0, 0, 0, 0x1f, 0x18, 0x0, 0x9, 0xfe, 0,
0xff, 0xff, 0xff, 0xff} },/* VARIABLE LENGTH, READ(32) */
@@ -477,8 +478,8 @@ static const struct opcode_info_t opcode_info_arr[SDEB_I_LAST_ELEMENT + 1] = {
{10, 0x13, 0xff, 0xff, 0, 0, 0, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0,
0} },
/* 20 */
- {0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* ALLOW REMOVAL */
- {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+ {0, 0x1e, 0, 0, NULL, NULL, /* ALLOW REMOVAL */
+ {6, 0, 0, 0, 0x3, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
{0, 0x1, 0, 0, resp_start_stop, NULL, /* REWIND ?? */
{6, 0x1, 0, 0, 0, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
{0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* ATA_PT */
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 83245391e956..054923e3393c 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -701,9 +701,12 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,
* strings.
*/
if (sdev->inquiry_len < 36) {
- sdev_printk(KERN_INFO, sdev,
- "scsi scan: INQUIRY result too short (%d),"
- " using 36\n", sdev->inquiry_len);
+ if (!sdev->host->short_inquiry) {
+ shost_printk(KERN_INFO, sdev->host,
+ "scsi scan: INQUIRY result too short (%d),"
+ " using 36\n", sdev->inquiry_len);
+ sdev->host->short_inquiry = 1;
+ }
sdev->inquiry_len = 36;
}
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index f5ace2bfc6db..21930c9ac9cd 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1102,6 +1102,14 @@ void __scsi_remove_device(struct scsi_device *sdev)
{
struct device *dev = &sdev->sdev_gendev;
+ /*
+ * This cleanup path is not reentrant and while it is impossible
+ * to get a new reference with scsi_device_get() someone can still
+ * hold a previously acquired one.
+ */
+ if (sdev->sdev_state == SDEV_DEL)
+ return;
+
if (sdev->is_visible) {
if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
return;
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 54519804c46a..3d22fc3e3c1a 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -638,11 +638,24 @@ static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode)
unsigned int max_blocks = 0;
q->limits.discard_zeroes_data = 0;
- q->limits.discard_alignment = sdkp->unmap_alignment *
- logical_block_size;
- q->limits.discard_granularity =
- max(sdkp->physical_block_size,
- sdkp->unmap_granularity * logical_block_size);
+
+ /*
+ * When LBPRZ is reported, discard alignment and granularity
+ * must be fixed to the logical block size. Otherwise the block
+ * layer will drop misaligned portions of the request which can
+ * lead to data corruption. If LBPRZ is not set, we honor the
+ * device preference.
+ */
+ if (sdkp->lbprz) {
+ q->limits.discard_alignment = 0;
+ q->limits.discard_granularity = 1;
+ } else {
+ q->limits.discard_alignment = sdkp->unmap_alignment *
+ logical_block_size;
+ q->limits.discard_granularity =
+ max(sdkp->physical_block_size,
+ sdkp->unmap_granularity * logical_block_size);
+ }
sdkp->provisioning_mode = mode;
@@ -2321,11 +2334,8 @@ got_data:
}
}
- if (sdkp->capacity > 0xffffffff) {
+ if (sdkp->capacity > 0xffffffff)
sdp->use_16_for_rw = 1;
- sdkp->max_xfer_blocks = SD_MAX_XFER_BLOCKS;
- } else
- sdkp->max_xfer_blocks = SD_DEF_XFER_BLOCKS;
/* Rescale capacity to 512-byte units */
if (sector_size == 4096)
@@ -2642,7 +2652,6 @@ static void sd_read_block_limits(struct scsi_disk *sdkp)
{
unsigned int sector_sz = sdkp->device->sector_size;
const int vpd_len = 64;
- u32 max_xfer_length;
unsigned char *buffer = kmalloc(vpd_len, GFP_KERNEL);
if (!buffer ||
@@ -2650,14 +2659,11 @@ static void sd_read_block_limits(struct scsi_disk *sdkp)
scsi_get_vpd_page(sdkp->device, 0xb0, buffer, vpd_len))
goto out;
- max_xfer_length = get_unaligned_be32(&buffer[8]);
- if (max_xfer_length)
- sdkp->max_xfer_blocks = max_xfer_length;
-
blk_queue_io_min(sdkp->disk->queue,
get_unaligned_be16(&buffer[6]) * sector_sz);
- blk_queue_io_opt(sdkp->disk->queue,
- get_unaligned_be32(&buffer[12]) * sector_sz);
+
+ sdkp->max_xfer_blocks = get_unaligned_be32(&buffer[8]);
+ sdkp->opt_xfer_blocks = get_unaligned_be32(&buffer[12]);
if (buffer[3] == 0x3c) {
unsigned int lba_count, desc_count;
@@ -2806,6 +2812,11 @@ static int sd_try_extended_inquiry(struct scsi_device *sdp)
return 0;
}
+static inline u32 logical_to_sectors(struct scsi_device *sdev, u32 blocks)
+{
+ return blocks << (ilog2(sdev->sector_size) - 9);
+}
+
/**
* sd_revalidate_disk - called the first time a new disk is seen,
* performs disk spin up, read_capacity, etc.
@@ -2815,8 +2826,9 @@ static int sd_revalidate_disk(struct gendisk *disk)
{
struct scsi_disk *sdkp = scsi_disk(disk);
struct scsi_device *sdp = sdkp->device;
+ struct request_queue *q = sdkp->disk->queue;
unsigned char *buffer;
- unsigned int max_xfer;
+ unsigned int dev_max, rw_max;
SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp,
"sd_revalidate_disk\n"));
@@ -2864,11 +2876,26 @@ static int sd_revalidate_disk(struct gendisk *disk)
*/
sd_set_flush_flag(sdkp);
- max_xfer = sdkp->max_xfer_blocks;
- max_xfer <<= ilog2(sdp->sector_size) - 9;
+ /* Initial block count limit based on CDB TRANSFER LENGTH field size. */
+ dev_max = sdp->use_16_for_rw ? SD_MAX_XFER_BLOCKS : SD_DEF_XFER_BLOCKS;
+
+ /* Some devices report a maximum block count for READ/WRITE requests. */
+ dev_max = min_not_zero(dev_max, sdkp->max_xfer_blocks);
+ q->limits.max_dev_sectors = logical_to_sectors(sdp, dev_max);
+
+ /*
+ * Use the device's preferred I/O size for reads and writes
+ * unless the reported value is unreasonably large (or garbage).
+ */
+ if (sdkp->opt_xfer_blocks && sdkp->opt_xfer_blocks <= dev_max &&
+ sdkp->opt_xfer_blocks <= SD_DEF_XFER_BLOCKS)
+ rw_max = q->limits.io_opt =
+ logical_to_sectors(sdp, sdkp->opt_xfer_blocks);
+ else
+ rw_max = BLK_DEF_MAX_SECTORS;
- sdkp->disk->queue->limits.max_sectors =
- min_not_zero(queue_max_hw_sectors(sdkp->disk->queue), max_xfer);
+ /* Combine with controller limits */
+ q->limits.max_sectors = min(rw_max, queue_max_hw_sectors(q));
set_capacity(disk, sdkp->capacity);
sd_config_write_same(sdkp);
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 63ba5ca7f9a1..5f2a84aff29f 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -67,6 +67,7 @@ struct scsi_disk {
atomic_t openers;
sector_t capacity; /* size in 512-byte sectors */
u32 max_xfer_blocks;
+ u32 opt_xfer_blocks;
u32 max_ws_blocks;
u32 max_unmap_blocks;
u32 unmap_granularity;
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index e0a1e52a04e7..2e522951b619 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -4083,6 +4083,7 @@ static int create_one_cdev(struct scsi_tape *tape, int mode, int rew)
}
cdev->owner = THIS_MODULE;
cdev->ops = &st_fops;
+ STm->cdevs[rew] = cdev;
error = cdev_add(cdev, cdev_devno, 1);
if (error) {
@@ -4091,7 +4092,6 @@ static int create_one_cdev(struct scsi_tape *tape, int mode, int rew)
pr_err("st%d: Device not attached.\n", dev_num);
goto out_free;
}
- STm->cdevs[rew] = cdev;
i = mode << (4 - ST_NBR_MODE_BITS);
snprintf(name, 10, "%s%s%s", rew ? "n" : "",
@@ -4110,8 +4110,9 @@ static int create_one_cdev(struct scsi_tape *tape, int mode, int rew)
return 0;
out_free:
cdev_del(STm->cdevs[rew]);
- STm->cdevs[rew] = NULL;
out:
+ STm->cdevs[rew] = NULL;
+ STm->devs[rew] = NULL;
return error;
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-08 18:47:51 +0000