diff options
Diffstat (limited to 'drivers/scsi')
| -rw-r--r-- | drivers/scsi/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/scsi/Makefile | 1 | ||||
| -rw-r--r-- | drivers/scsi/a100u2w.c | 2 | ||||
| -rw-r--r-- | drivers/scsi/ide-scsi.c | 840 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_hbadisc.c | 4 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_sli.c | 10 | ||||
| -rw-r--r-- | drivers/scsi/megaraid.c | 4 | ||||
| -rw-r--r-- | drivers/scsi/qla1280.c | 4 | ||||
| -rw-r--r-- | drivers/scsi/qla4xxx/ql4_mbx.c | 2 | ||||
| -rw-r--r-- | drivers/scsi/scsi_error.c | 2 | ||||
| -rw-r--r-- | drivers/scsi/scsi_scan.c | 3 | ||||
| -rw-r--r-- | drivers/scsi/sd.c | 109 |
12 files changed, 89 insertions, 901 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 152d4aa9354f..256c7bec7bd7 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -21,7 +21,7 @@ config SCSI You also need to say Y here if you have a device which speaks the SCSI protocol. Examples of this include the parallel port version of the IOMEGA ZIP drive, USB storage devices, Fibre - Channel, FireWire storage and the IDE-SCSI emulation driver. + Channel, and FireWire storage. To compile this driver as a module, choose M here and read <file:Documentation/scsi/scsi.txt>. @@ -101,9 +101,9 @@ config CHR_DEV_OSST ---help--- The OnStream SC-x0 SCSI tape drives cannot be driven by the standard st driver, but instead need this special osst driver and - use the /dev/osstX char device nodes (major 206). Via usb-storage - and ide-scsi, you may be able to drive the USB-x0 and DI-x0 drives - as well. Note that there is also a second generation of OnStream + use the /dev/osstX char device nodes (major 206). Via usb-storage, + you may be able to drive the USB-x0 and DI-x0 drives as well. + Note that there is also a second generation of OnStream tape drives (ADR-x0) that supports the standard SCSI-2 commands for tapes (QIC-157) and can be driven by the standard driver st. For more information, you may have a look at the SCSI-HOWTO @@ -884,6 +884,7 @@ config SCSI_IBMVSCSI tristate "IBM Virtual SCSI support" depends on PPC_PSERIES || PPC_ISERIES select SCSI_SRP_ATTRS + select VIOPATH if PPC_ISERIES help This is the IBM POWER Virtual SCSI Client diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 1410697257cb..7461eb09a031 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -105,7 +105,6 @@ obj-$(CONFIG_SCSI_GDTH) += gdth.o obj-$(CONFIG_SCSI_INITIO) += initio.o obj-$(CONFIG_SCSI_INIA100) += a100u2w.o obj-$(CONFIG_SCSI_QLOGICPTI) += qlogicpti.o -obj-$(CONFIG_BLK_DEV_IDESCSI) += ide-scsi.o obj-$(CONFIG_SCSI_MESH) += mesh.o obj-$(CONFIG_SCSI_MAC53C94) += mac53c94.o obj-$(CONFIG_BLK_DEV_3W_XXXX_RAID) += 3w-xxxx.o diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c index 3c298c7253ee..964769f66eac 100644 --- a/drivers/scsi/a100u2w.c +++ b/drivers/scsi/a100u2w.c @@ -633,7 +633,7 @@ static int orc_device_reset(struct orc_host * host, struct scsi_cmnd *cmd, unsig return FAILED; } - /* Reset device is handled by the firmare, we fill in an SCB and + /* Reset device is handled by the firmware, we fill in an SCB and fire it at the controller, it does the rest */ scb->opcode = ORC_BUSDEVRST; scb->target = target; diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c deleted file mode 100644 index c24140aff8e7..000000000000 --- a/drivers/scsi/ide-scsi.c +++ /dev/null @@ -1,840 +0,0 @@ -/* - * Copyright (C) 1996-1999 Gadi Oxman <gadio@netvision.net.il> - * Copyright (C) 2004-2005 Bartlomiej Zolnierkiewicz - */ - -/* - * Emulation of a SCSI host adapter for IDE ATAPI devices. - * - * With this driver, one can use the Linux SCSI drivers instead of the - * native IDE ATAPI drivers. - * - * Ver 0.1 Dec 3 96 Initial version. - * Ver 0.2 Jan 26 97 Fixed bug in cleanup_module() and added emulation - * of MODE_SENSE_6/MODE_SELECT_6 for cdroms. Thanks - * to Janos Farkas for pointing this out. - * Avoid using bitfields in structures for m68k. - * Added Scatter/Gather and DMA support. - * Ver 0.4 Dec 7 97 Add support for ATAPI PD/CD drives. - * Use variable timeout for each command. - * Ver 0.5 Jan 2 98 Fix previous PD/CD support. - * Allow disabling of SCSI-6 to SCSI-10 transformation. - * Ver 0.6 Jan 27 98 Allow disabling of SCSI command translation layer - * for access through /dev/sg. - * Fix MODE_SENSE_6/MODE_SELECT_6/INQUIRY translation. - * Ver 0.7 Dec 04 98 Ignore commands where lun != 0 to avoid multiple - * detection of devices with CONFIG_SCSI_MULTI_LUN - * Ver 0.8 Feb 05 99 Optical media need translation too. Reverse 0.7. - * Ver 0.9 Jul 04 99 Fix a bug in SG_SET_TRANSFORM. - * Ver 0.91 Jun 10 02 Fix "off by one" error in transforms - * Ver 0.92 Dec 31 02 Implement new SCSI mid level API - */ - -#define IDESCSI_VERSION "0.92" - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/ioport.h> -#include <linux/blkdev.h> -#include <linux/errno.h> -#include <linux/slab.h> -#include <linux/ide.h> -#include <linux/scatterlist.h> -#include <linux/delay.h> -#include <linux/mutex.h> -#include <linux/bitops.h> - -#include <asm/io.h> -#include <asm/uaccess.h> - -#include <scsi/scsi.h> -#include <scsi/scsi_cmnd.h> -#include <scsi/scsi_device.h> -#include <scsi/scsi_host.h> -#include <scsi/scsi_tcq.h> -#include <scsi/sg.h> - -#define IDESCSI_DEBUG_LOG 0 - -#if IDESCSI_DEBUG_LOG -#define debug_log(fmt, args...) \ - printk(KERN_INFO "ide-scsi: " fmt, ## args) -#else -#define debug_log(fmt, args...) do {} while (0) -#endif - -/* - * SCSI command transformation layer - */ -#define IDESCSI_SG_TRANSFORM 1 /* /dev/sg transformation */ - -/* - * Log flags - */ -#define IDESCSI_LOG_CMD 0 /* Log SCSI commands */ - -typedef struct ide_scsi_obj { - ide_drive_t *drive; - ide_driver_t *driver; - struct gendisk *disk; - struct Scsi_Host *host; - - unsigned long transform; /* SCSI cmd translation layer */ - unsigned long log; /* log flags */ -} idescsi_scsi_t; - -static DEFINE_MUTEX(idescsi_ref_mutex); -/* Set by module param to skip cd */ -static int idescsi_nocd; - -#define ide_scsi_g(disk) \ - container_of((disk)->private_data, struct ide_scsi_obj, driver) - -static struct ide_scsi_obj *ide_scsi_get(struct gendisk *disk) -{ - struct ide_scsi_obj *scsi = NULL; - - mutex_lock(&idescsi_ref_mutex); - scsi = ide_scsi_g(disk); - if (scsi) { - if (ide_device_get(scsi->drive)) - scsi = NULL; - else - scsi_host_get(scsi->host); - } - mutex_unlock(&idescsi_ref_mutex); - return scsi; -} - -static void ide_scsi_put(struct ide_scsi_obj *scsi) -{ - ide_drive_t *drive = scsi->drive; - - mutex_lock(&idescsi_ref_mutex); - scsi_host_put(scsi->host); - ide_device_put(drive); - mutex_unlock(&idescsi_ref_mutex); -} - -static inline idescsi_scsi_t *scsihost_to_idescsi(struct Scsi_Host *host) -{ - return (idescsi_scsi_t*) (&host[1]); -} - -static inline idescsi_scsi_t *drive_to_idescsi(ide_drive_t *ide_drive) -{ - return scsihost_to_idescsi(ide_drive->driver_data); -} - -static void ide_scsi_hex_dump(u8 *data, int len) -{ - print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, data, len, 0); -} - -static int idescsi_end_request(ide_drive_t *, int, int); - -static void ide_scsi_callback(ide_drive_t *drive, int dsc) -{ - idescsi_scsi_t *scsi = drive_to_idescsi(drive); - struct ide_atapi_pc *pc = drive->pc; - - if (pc->flags & PC_FLAG_TIMEDOUT) - debug_log("%s: got timed out packet %lu at %lu\n", __func__, - pc->scsi_cmd->serial_number, jiffies); - /* end this request now - scsi should retry it*/ - else if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) - printk(KERN_INFO "Packet command completed, %d bytes" - " transferred\n", pc->xferred); - - idescsi_end_request(drive, 1, 0); -} - -static int idescsi_check_condition(ide_drive_t *drive, - struct request *failed_cmd) -{ - idescsi_scsi_t *scsi = drive_to_idescsi(drive); - struct ide_atapi_pc *pc; - struct request *rq; - u8 *buf; - - /* stuff a sense request in front of our current request */ - pc = kzalloc(sizeof(struct ide_atapi_pc), GFP_ATOMIC); - rq = blk_get_request(drive->queue, READ, GFP_ATOMIC); - buf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_ATOMIC); - if (!pc || !rq || !buf) { - kfree(buf); - if (rq) - blk_put_request(rq); - kfree(pc); - return -ENOMEM; - } - rq->special = (char *) pc; - pc->rq = rq; - pc->buf = buf; - pc->c[0] = REQUEST_SENSE; - pc->c[4] = pc->req_xfer = pc->buf_size = SCSI_SENSE_BUFFERSIZE; - rq->cmd_type = REQ_TYPE_SENSE; - rq->cmd_flags |= REQ_PREEMPT; - pc->timeout = jiffies + WAIT_READY; - /* NOTE! Save the failed packet command in "rq->buffer" */ - rq->buffer = (void *) failed_cmd->special; - pc->scsi_cmd = ((struct ide_atapi_pc *) failed_cmd->special)->scsi_cmd; - if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) { - printk ("ide-scsi: %s: queue cmd = ", drive->name); - ide_scsi_hex_dump(pc->c, 6); - } - rq->rq_disk = scsi->disk; - rq->ref_count++; - memcpy(rq->cmd, pc->c, 12); - ide_do_drive_cmd(drive, rq); - return 0; -} - -static ide_startstop_t -idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) -{ - ide_hwif_t *hwif = drive->hwif; - - if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ)) - /* force an abort */ - hwif->tp_ops->exec_command(hwif, ATA_CMD_IDLEIMMEDIATE); - - rq->errors++; - - idescsi_end_request(drive, 0, 0); - - return ide_stopped; -} - -static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs) -{ - idescsi_scsi_t *scsi = drive_to_idescsi(drive); - struct request *rq = HWGROUP(drive)->rq; - struct ide_atapi_pc *pc = (struct ide_atapi_pc *) rq->special; - int log = test_bit(IDESCSI_LOG_CMD, &scsi->log); - struct Scsi_Host *host; - int errors = rq->errors; - unsigned long flags; - - if (!blk_special_request(rq) && !blk_sense_request(rq)) { - ide_end_request(drive, uptodate, nrsecs); - return 0; - } - ide_end_drive_cmd (drive, 0, 0); - if (blk_sense_request(rq)) { - struct ide_atapi_pc *opc = (struct ide_atapi_pc *) rq->buffer; - if (log) { - printk ("ide-scsi: %s: wrap up check %lu, rst = ", drive->name, opc->scsi_cmd->serial_number); - ide_scsi_hex_dump(pc->buf, 16); - } - memcpy((void *) opc->scsi_cmd->sense_buffer, pc->buf, - SCSI_SENSE_BUFFERSIZE); - kfree(pc->buf); - kfree(pc); - blk_put_request(rq); - pc = opc; - rq = pc->rq; - pc->scsi_cmd->result = (CHECK_CONDITION << 1) | - (((pc->flags & PC_FLAG_TIMEDOUT) ? - DID_TIME_OUT : - DID_OK) << 16); - } else if (pc->flags & PC_FLAG_TIMEDOUT) { - if (log) - printk (KERN_WARNING "ide-scsi: %s: timed out for %lu\n", - drive->name, pc->scsi_cmd->serial_number); - pc->scsi_cmd->result = DID_TIME_OUT << 16; - } else if (errors >= ERROR_MAX) { - pc->scsi_cmd->result = DID_ERROR << 16; - if (log) - printk ("ide-scsi: %s: I/O error for %lu\n", drive->name, pc->scsi_cmd->serial_number); - } else if (errors) { - if (log) - printk ("ide-scsi: %s: check condition for %lu\n", drive->name, pc->scsi_cmd->serial_number); - if (!idescsi_check_condition(drive, rq)) - /* we started a request sense, so we'll be back, exit for now */ - return 0; - pc->scsi_cmd->result = (CHECK_CONDITION << 1) | (DID_OK << 16); - } else { - pc->scsi_cmd->result = DID_OK << 16; - } - host = pc->scsi_cmd->device->host; - spin_lock_irqsave(host->host_lock, flags); - pc->done(pc->scsi_cmd); - spin_unlock_irqrestore(host->host_lock, flags); - kfree(pc); - blk_put_request(rq); - drive->pc = NULL; - return 0; -} - -static inline int idescsi_set_direction(struct ide_atapi_pc *pc) -{ - switch (pc->c[0]) { - case READ_6: case READ_10: case READ_12: - pc->flags &= ~PC_FLAG_WRITING; - return 0; - case WRITE_6: case WRITE_10: case WRITE_12: - pc->flags |= PC_FLAG_WRITING; - return 0; - default: - return 1; - } -} - -static int idescsi_map_sg(ide_drive_t *drive, struct ide_atapi_pc *pc) -{ - ide_hwif_t *hwif = drive->hwif; - struct scatterlist *sg, *scsi_sg; - int segments; - - if (!pc->req_xfer || pc->req_xfer % 1024) - return 1; - - if (idescsi_set_direction(pc)) - return 1; - - sg = hwif->sg_table; - scsi_sg = scsi_sglist(pc->scsi_cmd); - segments = scsi_sg_count(pc->scsi_cmd); - - if (segments > hwif->sg_max_nents) - return 1; - - hwif->sg_nents = segments; - memcpy(sg, scsi_sg, sizeof(*sg) * segments); - - return 0; -} - -static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive, - struct ide_atapi_pc *pc) -{ - /* Set the current packet command */ - drive->pc = pc; - - return ide_issue_pc(drive, ide_scsi_get_timeout(pc), ide_scsi_expiry); -} - -/* - * idescsi_do_request is our request handling function. - */ -static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *rq, sector_t block) -{ - debug_log("dev: %s, cmd: %x, errors: %d\n", rq->rq_disk->disk_name, - rq->cmd[0], rq->errors); - debug_log("sector: %ld, nr_sectors: %ld, current_nr_sectors: %d\n", - rq->sector, rq->nr_sectors, rq->current_nr_sectors); - - if (blk_sense_request(rq) || blk_special_request(rq)) { - struct ide_atapi_pc *pc = (struct ide_atapi_pc *)rq->special; - - if ((drive->dev_flags & IDE_DFLAG_USING_DMA) && - idescsi_map_sg(drive, pc) == 0) - pc->flags |= PC_FLAG_DMA_OK; - - return idescsi_issue_pc(drive, pc); - } - blk_dump_rq_flags(rq, "ide-scsi: unsup command"); - idescsi_end_request (drive, 0, 0); - return ide_stopped; -} - -#ifdef CONFIG_IDE_PROC_FS -static ide_proc_entry_t idescsi_proc[] = { - { "capacity", S_IFREG|S_IRUGO, proc_ide_read_capacity, NULL }, - { NULL, 0, NULL, NULL } -}; - -#define ide_scsi_devset_get(name, field) \ -static int get_##name(ide_drive_t *drive) \ -{ \ - idescsi_scsi_t *scsi = drive_to_idescsi(drive); \ - return scsi->field; \ -} - -#define ide_scsi_devset_set(name, field) \ -static int set_##name(ide_drive_t *drive, int arg) \ -{ \ - idescsi_scsi_t *scsi = drive_to_idescsi(drive); \ - scsi->field = arg; \ - return 0; \ -} - -#define ide_scsi_devset_rw_field(_name, _field) \ -ide_scsi_devset_get(_name, _field); \ -ide_scsi_devset_set(_name, _field); \ -IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name); - -ide_devset_rw_field(bios_cyl, bios_cyl); -ide_devset_rw_field(bios_head, bios_head); -ide_devset_rw_field(bios_sect, bios_sect); - -ide_scsi_devset_rw_field(transform, transform); -ide_scsi_devset_rw_field(log, log); - -static const struct ide_proc_devset idescsi_settings[] = { - IDE_PROC_DEVSET(bios_cyl, 0, 1023), - IDE_PROC_DEVSET(bios_head, 0, 255), - IDE_PROC_DEVSET(bios_sect, 0, 63), - IDE_PROC_DEVSET(log, 0, 1), - IDE_PROC_DEVSET(transform, 0, 3), - { 0 }, -}; - -static ide_proc_entry_t *ide_scsi_proc_entries(ide_drive_t *drive) -{ - return idescsi_proc; -} - -static const struct ide_proc_devset *ide_scsi_proc_devsets(ide_drive_t *drive) -{ - return idescsi_settings; -} -#endif - -/* - * Driver initialization. - */ -static void idescsi_setup (ide_drive_t *drive, idescsi_scsi_t *scsi) -{ - clear_bit(IDESCSI_SG_TRANSFORM, &scsi->transform); -#if IDESCSI_DEBUG_LOG - set_bit(IDESCSI_LOG_CMD, &scsi->log); -#endif /* IDESCSI_DEBUG_LOG */ - - drive->pc_callback = ide_scsi_callback; - drive->pc_update_buffers = NULL; - drive->pc_io_buffers = ide_io_buffers; - - ide_proc_register_driver(drive, scsi->driver); -} - -static void ide_scsi_remove(ide_drive_t *drive) -{ - struct Scsi_Host *scsihost = drive->driver_data; - struct ide_scsi_obj *scsi = scsihost_to_idescsi(scsihost); - struct gendisk *g = scsi->disk; - - scsi_remove_host(scsihost); - ide_proc_unregister_driver(drive, scsi->driver); - - ide_unregister_region(g); - - drive->driver_data = NULL; - g->private_data = NULL; - put_disk(g); - - ide_scsi_put(scsi); - - drive->dev_flags &= ~IDE_DFLAG_SCSI; -} - -static int ide_scsi_probe(ide_drive_t *); - -static ide_driver_t idescsi_driver = { - .gen_driver = { - .owner = THIS_MODULE, - .name = "ide-scsi", - .bus = &ide_bus_type, - }, - .probe = ide_scsi_probe, - .remove = ide_scsi_remove, - .version = IDESCSI_VERSION, - .do_request = idescsi_do_request, - .end_request = idescsi_end_request, - .error = idescsi_atapi_error, -#ifdef CONFIG_IDE_PROC_FS - .proc_entries = ide_scsi_proc_entries, - .proc_devsets = ide_scsi_proc_devsets, -#endif -}; - -static int idescsi_ide_open(struct block_device *bdev, fmode_t mode) -{ - struct ide_scsi_obj *scsi = ide_scsi_get(bdev->bd_disk); - - if (!scsi) - return -ENXIO; - - return 0; -} - -static int idescsi_ide_release(struct gendisk *disk, fmode_t mode) -{ - ide_scsi_put(ide_scsi_g(disk)); - return 0; -} - -static int idescsi_ide_ioctl(struct block_device *bdev, fmode_t mode, - unsigned int cmd, unsigned long arg) -{ - struct ide_scsi_obj *scsi = ide_scsi_g(bdev->bd_disk); - return generic_ide_ioctl(scsi->drive, bdev, cmd, arg); -} - -static struct block_device_operations idescsi_ops = { - .owner = THIS_MODULE, - .open = idescsi_ide_open, - .release = idescsi_ide_release, - .locked_ioctl = idescsi_ide_ioctl, -}; - -static int idescsi_slave_configure(struct scsi_device * sdp) -{ - /* Configure detected device */ - sdp->use_10_for_rw = 1; - sdp->use_10_for_ms = 1; - scsi_adjust_queue_depth(sdp, MSG_SIMPLE_TAG, sdp->host->cmd_per_lun); - return 0; -} - -static const char *idescsi_info (struct Scsi_Host *host) -{ - return "SCSI host adapter emulation for IDE ATAPI devices"; -} - -static int idescsi_ioctl (struct scsi_device *dev, int cmd, void __user *arg) -{ - idescsi_scsi_t *scsi = scsihost_to_idescsi(dev->host); - - if (cmd == SG_SET_TRANSFORM) { - if (arg) - set_bit(IDESCSI_SG_TRANSFORM, &scsi->transform); - else - clear_bit(IDESCSI_SG_TRANSFORM, &scsi->transform); - return 0; - } else if (cmd == SG_GET_TRANSFORM) - return put_user(test_bit(IDESCSI_SG_TRANSFORM, &scsi->transform), (int __user *) arg); - return -EINVAL; -} - -static int idescsi_queue (struct scsi_cmnd *cmd, - void (*done)(struct scsi_cmnd *)) -{ - struct Scsi_Host *host = cmd->device->host; - idescsi_scsi_t *scsi = scsihost_to_idescsi(host); - ide_drive_t *drive = scsi->drive; - struct request *rq = NULL; - struct ide_atapi_pc *pc = NULL; - int write = cmd->sc_data_direction == DMA_TO_DEVICE; - - if (!drive) { - scmd_printk (KERN_ERR, cmd, "drive not present\n"); - goto abort; - } - scsi = drive_to_idescsi(drive); - pc = kmalloc(sizeof(struct ide_atapi_pc), GFP_ATOMIC); - rq = blk_get_request(drive->queue, write, GFP_ATOMIC); - if (rq == NULL || pc == NULL) { - printk (KERN_ERR "ide-scsi: %s: out of memory\n", drive->name); - goto abort; - } - - memset (pc->c, 0, 12); - pc->flags = 0; - if (cmd->sc_data_direction == DMA_TO_DEVICE) - pc->flags |= PC_FLAG_WRITING; - pc->rq = rq; - memcpy (pc->c, cmd->cmnd, cmd->cmd_len); - pc->buf = NULL; - pc->sg = scsi_sglist(cmd); - pc->sg_cnt = scsi_sg_count(cmd); - pc->b_count = 0; - pc->req_xfer = pc->buf_size = scsi_bufflen(cmd); - pc->scsi_cmd = cmd; - pc->done = done; - pc->timeout = jiffies + cmd->request->timeout; - - if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) { - printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number); - ide_scsi_hex_dump(cmd->cmnd, cmd->cmd_len); - if (memcmp(pc->c, cmd->cmnd, cmd->cmd_len)) { - printk ("ide-scsi: %s: que %lu, tsl = ", drive->name, cmd->serial_number); - ide_scsi_hex_dump(pc->c, 12); - } - } - - rq->special = (char *) pc; - rq->cmd_type = REQ_TYPE_SPECIAL; - spin_unlock_irq(host->host_lock); - rq->ref_count++; - memcpy(rq->cmd, pc->c, 12); - blk_execute_rq_nowait(drive->queue, scsi->disk, rq, 0, NULL); - spin_lock_irq(host->host_lock); - return 0; -abort: - kfree (pc); - if (rq) - blk_put_request(rq); - cmd->result = DID_ERROR << 16; - done(cmd); - return 0; -} - -static int idescsi_eh_abort (struct scsi_cmnd *cmd) -{ - idescsi_scsi_t *scsi = scsihost_to_idescsi(cmd->device->host); - ide_drive_t *drive = scsi->drive; - ide_hwif_t *hwif; - ide_hwgroup_t *hwgroup; - int busy; - int ret = FAILED; - - struct ide_atapi_pc *pc; - - /* In idescsi_eh_abort we try to gently pry our command from the ide subsystem */ - - if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) - printk (KERN_WARNING "ide-scsi: abort called for %lu\n", cmd->serial_number); - - if (!drive) { - printk (KERN_WARNING "ide-scsi: Drive not set in idescsi_eh_abort\n"); - WARN_ON(1); - goto no_drive; - } - - hwif = drive->hwif; - hwgroup = hwif->hwgroup; - - /* First give it some more time, how much is "right" is hard to say :-( - FIXME - uses mdelay which causes latency? */ - busy = ide_wait_not_busy(hwif, 100); - if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) - printk (KERN_WARNING "ide-scsi: drive did%s become ready\n", busy?" not":""); - - spin_lock_irq(&hwgroup->lock); - - /* If there is no pc running we're done (our interrupt took care of it) */ - pc = drive->pc; - if (pc == NULL) { - ret = SUCCESS; - goto ide_unlock; - } - - /* It's somewhere in flight. Does ide subsystem agree? */ - if (pc->scsi_cmd->serial_number == cmd->serial_number && !busy && - elv_queue_empty(drive->queue) && HWGROUP(drive)->rq != pc->rq) { - /* - * FIXME - not sure this condition can ever occur - */ - printk (KERN_ERR "ide-scsi: cmd aborted!\n"); - - if (blk_sense_request(pc->rq)) - kfree(pc->buf); - /* we need to call blk_put_request twice. */ - blk_put_request(pc->rq); - blk_put_request(pc->rq); - kfree(pc); - drive->pc = NULL; - - ret = SUCCESS; - } - -ide_unlock: - spin_unlock_irq(&hwgroup->lock); -no_drive: - if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) - printk (KERN_WARNING "ide-scsi: abort returns %s\n", ret == SUCCESS?"success":"failed"); - - return ret; -} - -static int idescsi_eh_reset (struct scsi_cmnd *cmd) -{ - struct request *req; - idescsi_scsi_t *scsi = scsihost_to_idescsi(cmd->device->host); - ide_drive_t *drive = scsi->drive; - ide_hwgroup_t *hwgroup; - int ready = 0; - int ret = SUCCESS; - - struct ide_atapi_pc *pc; - - /* In idescsi_eh_reset we forcefully remove the command from the ide subsystem and reset the device. */ - - if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) - printk (KERN_WARNING "ide-scsi: reset called for %lu\n", cmd->serial_number); - - if (!drive) { - printk (KERN_WARNING "ide-scsi: Drive not set in idescsi_eh_reset\n"); - WARN_ON(1); - return FAILED; - } - - hwgroup = drive->hwif->hwgroup; - - spin_lock_irq(cmd->device->host->host_lock); - spin_lock(&hwgroup->lock); - - pc = drive->pc; - if (pc) - req = pc->rq; - - if (pc == NULL || req != hwgroup->rq || hwgroup->handler == NULL) { - printk (KERN_WARNING "ide-scsi: No active request in idescsi_eh_reset\n"); - spin_unlock(&hwgroup->lock); - spin_unlock_irq(cmd->device->host->host_lock); - return FAILED; - } - - /* kill current request */ - if (__blk_end_request(req, -EIO, 0)) - BUG(); - if (blk_sense_request(req)) - kfree(pc->buf); - kfree(pc); - drive->pc = NULL; - blk_put_request(req); - - /* now nuke the drive queue */ - while ((req = elv_next_request(drive->queue))) { - if (__blk_end_request(req, -EIO, 0)) - BUG(); - } - - hwgroup->rq = NULL; - hwgroup->handler = NULL; - hwgroup->busy = 1; /* will set this to zero when ide reset finished */ - spin_unlock(&hwgroup->lock); - - ide_do_reset(drive); - - /* ide_do_reset starts a polling handler which restarts itself every 50ms until the reset finishes */ - - do { - spin_unlock_irq(cmd->device->host->host_lock); - msleep(50); - spin_lock_irq(cmd->device->host->host_lock); - } while ( HWGROUP(drive)->handler ); - - ready = drive_is_ready(drive); - HWGROUP(drive)->busy--; - if (!ready) { - printk (KERN_ERR "ide-scsi: reset failed!\n"); - ret = FAILED; - } - - spin_unlock_irq(cmd->device->host->host_lock); - return ret; -} - -static int idescsi_bios(struct scsi_device *sdev, struct block_device *bdev, - sector_t capacity, int *parm) -{ - idescsi_scsi_t *idescsi = scsihost_to_idescsi(sdev->host); - ide_drive_t *drive = idescsi->drive; - - if (drive->bios_cyl && drive->bios_head && drive->bios_sect) { - parm[0] = drive->bios_head; - parm[1] = drive->bios_sect; - parm[2] = drive->bios_cyl; - } - return 0; -} - -static struct scsi_host_template idescsi_template = { - .module = THIS_MODULE, - .name = "idescsi", - .info = idescsi_info, - .slave_configure = idescsi_slave_configure, - .ioctl = idescsi_ioctl, - .queuecommand = idescsi_queue, - .eh_abort_handler = idescsi_eh_abort, - .eh_host_reset_handler = idescsi_eh_reset, - .bios_param = idescsi_bios, - .can_queue = 40, - .this_id = -1, - .sg_tablesize = 256, - .cmd_per_lun = 5, - .max_sectors = 128, - .use_clustering = DISABLE_CLUSTERING, - .emulated = 1, - .proc_name = "ide-scsi", -}; - -static int ide_scsi_probe(ide_drive_t *drive) -{ - idescsi_scsi_t *idescsi; - struct Scsi_Host *host; - struct gendisk *g; - static int warned; - int err = -ENOMEM; - u16 last_lun; - - if (!warned && drive->media == ide_cdrom) { - printk(KERN_WARNING "ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device\n"); - warned = 1; - } - - if (idescsi_nocd && drive->media == ide_cdrom) - return -ENODEV; - - if (!strstr("ide-scsi", drive->driver_req) || - drive->media == ide_disk || - !(host = scsi_host_alloc(&idescsi_template,sizeof(idescsi_scsi_t)))) - return -ENODEV; - - drive->dev_flags |= IDE_DFLAG_SCSI; - - g = alloc_disk(1 << PARTN_BITS); - if (!g) - goto out_host_put; - - ide_init_disk(g, drive); - - host->max_id = 1; - - last_lun = drive->id[ATA_ID_LAST_LUN]; - if (last_lun) - debug_log("%s: last_lun=%u\n", drive->name, last_lun); - - if ((last_lun & 7) != 7) - host->max_lun = (last_lun & 7) + 1; - else - host->max_lun = 1; - - drive->driver_data = host; - idescsi = scsihost_to_idescsi(host); - idescsi->drive = drive; - idescsi->driver = &idescsi_driver; - idescsi->host = host; - idescsi->disk = g; - g->private_data = &idescsi->driver; - err = 0; - idescsi_setup(drive, idescsi); - g->fops = &idescsi_ops; - ide_register_region(g); - err = scsi_add_host(host, &drive->gendev); - if (!err) { - scsi_scan_host(host); - return 0; - } - /* fall through on error */ - ide_unregister_region(g); - ide_proc_unregister_driver(drive, &idescsi_driver); - - put_disk(g); -out_host_put: - drive->dev_flags &= ~IDE_DFLAG_SCSI; - scsi_host_put(host); - return err; -} - -static int __init init_idescsi_module(void) -{ - return driver_register(&idescsi_driver.gen_driver); -} - -static void __exit exit_idescsi_module(void) -{ - driver_unregister(&idescsi_driver.gen_driver); -} - -module_param(idescsi_nocd, int, 0600); -MODULE_PARM_DESC(idescsi_nocd, "Disable handling of CD-ROMs so they may be driven by ide-cd"); -module_init(init_idescsi_module); -module_exit(exit_idescsi_module); -MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 8c64494444bf..311ed6dea726 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -1964,10 +1964,10 @@ lpfc_set_disctmo(struct lpfc_vport *vport) uint32_t tmo; if (vport->port_state == LPFC_LOCAL_CFG_LINK) { - /* For FAN, timeout should be greater then edtov */ + /* For FAN, timeout should be greater than edtov */ tmo = (((phba->fc_edtov + 999) / 1000) + 1); } else { - /* Normal discovery timeout should be > then ELS/CT timeout + /* Normal discovery timeout should be > than ELS/CT timeout * FC spec states we need 3 * ratov for CT requests */ tmo = ((phba->fc_ratov * 3) + 3); diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 01dfdc8696f8..a36a120561e2 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -420,7 +420,7 @@ lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring) if (unlikely(pring->local_getidx >= max_cmd_idx)) { lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "0315 Ring %d issue: portCmdGet %d " - "is bigger then cmd ring %d\n", + "is bigger than cmd ring %d\n", pring->ringno, pring->local_getidx, max_cmd_idx); @@ -1628,12 +1628,12 @@ lpfc_sli_rsp_pointers_error(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) { struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno]; /* - * Ring <ringno> handler: portRspPut <portRspPut> is bigger then + * Ring <ringno> handler: portRspPut <portRspPut> is bigger than * rsp ring <portRspMax> */ lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "0312 Ring %d handler: portRspPut %d " - "is bigger then rsp ring %d\n", + "is bigger than rsp ring %d\n", pring->ringno, le32_to_cpu(pgp->rspPutInx), pring->numRiocb); @@ -2083,12 +2083,12 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba, portRspPut = le32_to_cpu(pgp->rspPutInx); if (portRspPut >= portRspMax) { /* - * Ring <ringno> handler: portRspPut <portRspPut> is bigger then + * Ring <ringno> handler: portRspPut <portRspPut> is bigger than * rsp ring <portRspMax> */ lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "0303 Ring %d handler: portRspPut %d " - "is bigger then rsp ring %d\n", + "is bigger than rsp ring %d\n", pring->ringno, portRspPut, portRspMax); phba->link_state = LPFC_HBA_ERROR; diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index 7dc62deb4087..9fdcd60c5493 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -1967,8 +1967,8 @@ megaraid_abort_and_reset(adapter_t *adapter, Scsi_Cmnd *cmd, int aor) scb->state |= aor; /* - * Check if this command has firmare owenership. If - * yes, we cannot reset this command. Whenever, f/w + * Check if this command has firmware ownership. If + * yes, we cannot reset this command. Whenever f/w * completes this command, we will return appropriate * status from ISR. */ diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index 8cb9240596ab..df09820e8916 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -128,7 +128,7 @@ - Integrate ql12160_set_target_parameters() with 1280 version - Make qla1280_setup() non static - Do not call qla1280_check_for_dead_scsi_bus() on every I/O request - sent to the card - this command pauses the firmare!!! + sent to the card - this command pauses the firmware!!! Rev 3.23.15 Beta March 19, 2002, Jes Sorensen - Clean up qla1280.h - remove obsolete QL_DEBUG_LEVEL_x definitions - Remove a pile of pointless and confusing (srb_t **) and @@ -659,7 +659,7 @@ static int qla1280_read_nvram(struct scsi_qla_host *ha) /* The firmware interface is, um, interesting, in that the * actual firmware image on the chip is little endian, thus, * the process of taking that image to the CPU would end up - * little endian. However, the firmare interface requires it + * little endian. However, the firmware interface requires it * to be read a word (two bytes) at a time. * * The net result of this would be that the word (and diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index c577d79bd7e8..051b0f5e8c8e 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -392,7 +392,7 @@ int qla4xxx_get_firmware_status(struct scsi_qla_host * ha) ha->iocb_hiwat -= IOCB_HIWAT_CUSHION; else dev_info(&ha->pdev->dev, "WARNING!!! You have less than %d " - "firmare IOCBs available (%d).\n", + "firmware IOCBs available (%d).\n", IOCB_HIWAT_CUSHION, ha->iocb_hiwat); return QLA_SUCCESS; diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 7484e4317efb..ad6a1370761e 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -1638,7 +1638,7 @@ int scsi_error_handler(void *data) * We use TASK_INTERRUPTIBLE so that the thread is not * counted against the load average as a running process. * We never actually get interrupted because kthread_run - * disables singal delivery for the created thread. + * disables signal delivery for the created thread. */ set_current_state(TASK_INTERRUPTIBLE); while (!kthread_should_stop()) { diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index f8493f219bc9..66505bb79410 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -32,6 +32,7 @@ #include <linux/delay.h> #include <linux/kthread.h> #include <linux/spinlock.h> +#include <linux/async.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> @@ -179,6 +180,8 @@ int scsi_complete_async_scans(void) spin_unlock(&async_scan_lock); kfree(data); + /* Synchronize async operations globally */ + async_synchronize_full(); return 0; } diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 835aebf78710..d57566b8be0a 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -48,6 +48,7 @@ #include <linux/delay.h> #include <linux/mutex.h> #include <linux/string_helpers.h> +#include <linux/async.h> #include <asm/uaccess.h> #include <scsi/scsi.h> @@ -1802,6 +1803,71 @@ static int sd_format_disk_name(char *prefix, int index, char *buf, int buflen) return 0; } +/* + * The asynchronous part of sd_probe + */ +static void sd_probe_async(void *data, async_cookie_t cookie) +{ + struct scsi_disk *sdkp = data; + struct scsi_device *sdp; + struct gendisk *gd; + u32 index; + struct device *dev; + + sdp = sdkp->device; + gd = sdkp->disk; + index = sdkp->index; + dev = &sdp->sdev_gendev; + + if (!sdp->request_queue->rq_timeout) { + if (sdp->type != TYPE_MOD) + blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT); + else + blk_queue_rq_timeout(sdp->request_queue, + SD_MOD_TIMEOUT); + } + + device_initialize(&sdkp->dev); + sdkp->dev.parent = &sdp->sdev_gendev; + sdkp->dev.class = &sd_disk_class; + dev_set_name(&sdkp->dev, dev_name(&sdp->sdev_gendev)); + + if (device_add(&sdkp->dev)) + goto out_free_index; + + get_device(&sdp->sdev_gendev); + + if (index < SD_MAX_DISKS) { + gd->major = sd_major((index & 0xf0) >> 4); + gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00); + gd->minors = SD_MINORS; + } + gd->fops = &sd_fops; + gd->private_data = &sdkp->driver; + gd->queue = sdkp->device->request_queue; + + sd_revalidate_disk(gd); + + blk_queue_prep_rq(sdp->request_queue, sd_prep_fn); + + gd->driverfs_dev = &sdp->sdev_gendev; + gd->flags = GENHD_FL_EXT_DEVT | GENHD_FL_DRIVERFS; + if (sdp->removable) + gd->flags |= GENHD_FL_REMOVABLE; + + dev_set_drvdata(dev, sdkp); + add_disk(gd); + sd_dif_config_host(sdkp); + + sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n", + sdp->removable ? "removable " : ""); + + return; + + out_free_index: + ida_remove(&sd_index_ida, index); +} + /** * sd_probe - called during driver initialization and whenever a * new scsi device is attached to the system. It is called once @@ -1865,48 +1931,7 @@ static int sd_probe(struct device *dev) sdkp->openers = 0; sdkp->previous_state = 1; - if (!sdp->request_queue->rq_timeout) { - if (sdp->type != TYPE_MOD) - blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT); - else - blk_queue_rq_timeout(sdp->request_queue, - SD_MOD_TIMEOUT); - } - - device_initialize(&sdkp->dev); - sdkp->dev.parent = &sdp->sdev_gendev; - sdkp->dev.class = &sd_disk_class; - dev_set_name(&sdkp->dev, dev_name(&sdp->sdev_gendev)); - - if (device_add(&sdkp->dev)) - goto out_free_index; - - get_device(&sdp->sdev_gendev); - - if (index < SD_MAX_DISKS) { - gd->major = sd_major((index & 0xf0) >> 4); - gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00); - gd->minors = SD_MINORS; - } - gd->fops = &sd_fops; - gd->private_data = &sdkp->driver; - gd->queue = sdkp->device->request_queue; - - sd_revalidate_disk(gd); - - blk_queue_prep_rq(sdp->request_queue, sd_prep_fn); - - gd->driverfs_dev = &sdp->sdev_gendev; - gd->flags = GENHD_FL_EXT_DEVT | GENHD_FL_DRIVERFS; - if (sdp->removable) - gd->flags |= GENHD_FL_REMOVABLE; - - dev_set_drvdata(dev, sdkp); - add_disk(gd); - sd_dif_config_host(sdkp); - - sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n", - sdp->removable ? "removable " : ""); + async_schedule(sd_probe_async, sdkp); return 0; |