summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/libata-core.c37
-rw-r--r--drivers/scsi/qla2xxx/qla_init.c21
-rw-r--r--drivers/scsi/sata_sis.c4
3 files changed, 37 insertions, 25 deletions
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 5cc53cd9323e..d92273cbe0de 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -2465,9 +2465,12 @@ static unsigned long ata_pio_poll(struct ata_port *ap)
*
* LOCKING:
* None. (executing in kernel thread context)
+ *
+ * RETURNS:
+ * Non-zero if qc completed, zero otherwise.
*/
-static void ata_pio_complete (struct ata_port *ap)
+static int ata_pio_complete (struct ata_port *ap)
{
struct ata_queued_cmd *qc;
u8 drv_stat;
@@ -2486,14 +2489,14 @@ static void ata_pio_complete (struct ata_port *ap)
if (drv_stat & (ATA_BUSY | ATA_DRQ)) {
ap->pio_task_state = PIO_ST_LAST_POLL;
ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO;
- return;
+ return 0;
}
}
drv_stat = ata_wait_idle(ap);
if (!ata_ok(drv_stat)) {
ap->pio_task_state = PIO_ST_ERR;
- return;
+ return 0;
}
qc = ata_qc_from_tag(ap, ap->active_tag);
@@ -2502,6 +2505,10 @@ static void ata_pio_complete (struct ata_port *ap)
ap->pio_task_state = PIO_ST_IDLE;
ata_poll_qc_complete(qc, drv_stat);
+
+ /* another command may start at this point */
+
+ return 1;
}
@@ -2709,7 +2716,7 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes)
next_sg:
if (unlikely(qc->cursg >= qc->n_elem)) {
- /*
+ /*
* The end of qc->sg is reached and the device expects
* more data to transfer. In order not to overrun qc->sg
* and fulfill length specified in the byte count register,
@@ -2721,7 +2728,7 @@ next_sg:
unsigned int i;
if (words) /* warning if bytes > 1 */
- printk(KERN_WARNING "ata%u: %u bytes trailing data\n",
+ printk(KERN_WARNING "ata%u: %u bytes trailing data\n",
ap->id, bytes);
for (i = 0; i < words; i++)
@@ -2849,9 +2856,7 @@ static void ata_pio_block(struct ata_port *ap)
if (is_atapi_taskfile(&qc->tf)) {
/* no more data to transfer or unsupported ATAPI command */
if ((status & ATA_DRQ) == 0) {
- ap->pio_task_state = PIO_ST_IDLE;
-
- ata_poll_qc_complete(qc, status);
+ ap->pio_task_state = PIO_ST_LAST;
return;
}
@@ -2887,7 +2892,12 @@ static void ata_pio_error(struct ata_port *ap)
static void ata_pio_task(void *_data)
{
struct ata_port *ap = _data;
- unsigned long timeout = 0;
+ unsigned long timeout;
+ int qc_completed;
+
+fsm_start:
+ timeout = 0;
+ qc_completed = 0;
switch (ap->pio_task_state) {
case PIO_ST_IDLE:
@@ -2898,7 +2908,7 @@ static void ata_pio_task(void *_data)
break;
case PIO_ST_LAST:
- ata_pio_complete(ap);
+ qc_completed = ata_pio_complete(ap);
break;
case PIO_ST_POLL:
@@ -2913,10 +2923,9 @@ static void ata_pio_task(void *_data)
}
if (timeout)
- queue_delayed_work(ata_wq, &ap->pio_task,
- timeout);
- else
- queue_work(ata_wq, &ap->pio_task);
+ queue_delayed_work(ata_wq, &ap->pio_task, timeout);
+ else if (!qc_completed)
+ goto fsm_start;
}
static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev,
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 3e9b64137873..23d095d3817b 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -201,6 +201,7 @@ int
qla2100_pci_config(scsi_qla_host_t *ha)
{
uint16_t w, mwi;
+ uint32_t d;
unsigned long flags;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
@@ -215,9 +216,9 @@ qla2100_pci_config(scsi_qla_host_t *ha)
pci_write_config_word(ha->pdev, PCI_COMMAND, w);
/* Reset expansion ROM address decode enable */
- pci_read_config_word(ha->pdev, PCI_ROM_ADDRESS, &w);
- w &= ~PCI_ROM_ADDRESS_ENABLE;
- pci_write_config_word(ha->pdev, PCI_ROM_ADDRESS, w);
+ pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d);
+ d &= ~PCI_ROM_ADDRESS_ENABLE;
+ pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d);
/* Get PCI bus information. */
spin_lock_irqsave(&ha->hardware_lock, flags);
@@ -237,6 +238,7 @@ int
qla2300_pci_config(scsi_qla_host_t *ha)
{
uint16_t w, mwi;
+ uint32_t d;
unsigned long flags = 0;
uint32_t cnt;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
@@ -302,9 +304,9 @@ qla2300_pci_config(scsi_qla_host_t *ha)
pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80);
/* Reset expansion ROM address decode enable */
- pci_read_config_word(ha->pdev, PCI_ROM_ADDRESS, &w);
- w &= ~PCI_ROM_ADDRESS_ENABLE;
- pci_write_config_word(ha->pdev, PCI_ROM_ADDRESS, w);
+ pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d);
+ d &= ~PCI_ROM_ADDRESS_ENABLE;
+ pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d);
/* Get PCI bus information. */
spin_lock_irqsave(&ha->hardware_lock, flags);
@@ -324,6 +326,7 @@ int
qla24xx_pci_config(scsi_qla_host_t *ha)
{
uint16_t w, mwi;
+ uint32_t d;
unsigned long flags = 0;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
int pcix_cmd_reg, pcie_dctl_reg;
@@ -366,9 +369,9 @@ qla24xx_pci_config(scsi_qla_host_t *ha)
}
/* Reset expansion ROM address decode enable */
- pci_read_config_word(ha->pdev, PCI_ROM_ADDRESS, &w);
- w &= ~PCI_ROM_ADDRESS_ENABLE;
- pci_write_config_word(ha->pdev, PCI_ROM_ADDRESS, w);
+ pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d);
+ d &= ~PCI_ROM_ADDRESS_ENABLE;
+ pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d);
/* Get PCI bus information. */
spin_lock_irqsave(&ha->hardware_lock, flags);
diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c
index a63f93186e41..b227e51d12f4 100644
--- a/drivers/scsi/sata_sis.c
+++ b/drivers/scsi/sata_sis.c
@@ -161,7 +161,7 @@ static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg)
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg, pdev->device);
- u32 val, val2;
+ u32 val, val2 = 0;
u8 pmr;
if (sc_reg == SCR_ERROR) /* doesn't exist in PCI cfg space */
@@ -289,7 +289,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
if (ent->device != 0x182) {
if ((pmr & SIS_PMR_COMBINED) == 0) {
printk(KERN_INFO "sata_sis: Detected SiS 180/181 chipset in SATA mode\n");
- port2_start=0x64;
+ port2_start = 64;
}
else {
printk(KERN_INFO "sata_sis: Detected SiS 180/181 chipset in combined mode\n");