summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/Kconfig20
-rw-r--r--drivers/scsi/aic7xxx/Kconfig.aic79xx2
-rw-r--r--drivers/scsi/bnx2fc/Kconfig5
-rw-r--r--drivers/scsi/bnx2i/Kconfig1
-rw-r--r--drivers/scsi/csiostor/Kconfig2
-rw-r--r--drivers/scsi/fnic/fnic_debugfs.c2
-rw-r--r--drivers/scsi/fnic/fnic_trace.c2
-rw-r--r--drivers/scsi/nsp32.c2
-rw-r--r--drivers/scsi/pcmcia/nsp_cs.c2
-rw-r--r--drivers/scsi/qla2xxx/Kconfig4
-rw-r--r--drivers/scsi/qla2xxx/qla_nx2.c2
-rw-r--r--drivers/scsi/scsi_lib.c5
12 files changed, 26 insertions, 23 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 71b0877245cb..e85e64a07d02 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -43,7 +43,7 @@ config SCSI_DMA
config SCSI_NETLINK
bool
default n
- select NET
+ depends on NET
config SCSI_MQ_DEFAULT
bool "SCSI: use blk-mq I/O path by default"
@@ -268,7 +268,7 @@ config SCSI_SPI_ATTRS
config SCSI_FC_ATTRS
tristate "FiberChannel Transport Attributes"
- depends on SCSI
+ depends on SCSI && NET
select SCSI_NETLINK
help
If you wish to export transport-specific information about
@@ -596,28 +596,28 @@ config HYPERV_STORAGE
config LIBFC
tristate "LibFC module"
- select SCSI_FC_ATTRS
+ depends on SCSI_FC_ATTRS
select CRC32
---help---
Fibre Channel library module
config LIBFCOE
tristate "LibFCoE module"
- select LIBFC
+ depends on LIBFC
---help---
Library for Fibre Channel over Ethernet module
config FCOE
tristate "FCoE module"
depends on PCI
- select LIBFCOE
+ depends on LIBFCOE
---help---
Fibre Channel over Ethernet module
config FCOE_FNIC
tristate "Cisco FNIC Driver"
depends on PCI && X86
- select LIBFCOE
+ depends on LIBFCOE
help
This is support for the Cisco PCI-Express FCoE HBA.
@@ -827,7 +827,7 @@ config SCSI_IBMVSCSI
config SCSI_IBMVFC
tristate "IBM Virtual FC support"
depends on PPC_PSERIES && SCSI
- select SCSI_FC_ATTRS
+ depends on SCSI_FC_ATTRS
help
This is the IBM POWER Virtual FC Client
@@ -1277,7 +1277,7 @@ source "drivers/scsi/qla4xxx/Kconfig"
config SCSI_LPFC
tristate "Emulex LightPulse Fibre Channel Support"
depends on PCI && SCSI
- select SCSI_FC_ATTRS
+ depends on SCSI_FC_ATTRS
select CRC_T10DIF
help
This lpfc driver supports the Emulex LightPulse
@@ -1687,7 +1687,7 @@ config SCSI_SUNESP
config ZFCP
tristate "FCP host bus adapter driver for IBM eServer zSeries"
depends on S390 && QDIO && SCSI
- select SCSI_FC_ATTRS
+ depends on SCSI_FC_ATTRS
help
If you want to access SCSI devices attached to your IBM eServer
zSeries by means of Fibre Channel interfaces say Y.
@@ -1715,7 +1715,7 @@ config SCSI_PM8001
config SCSI_BFA_FC
tristate "Brocade BFA Fibre Channel Support"
depends on PCI && SCSI
- select SCSI_FC_ATTRS
+ depends on SCSI_FC_ATTRS
help
This bfa driver supports all Brocade PCIe FC/FCOE host adapters.
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic79xx b/drivers/scsi/aic7xxx/Kconfig.aic79xx
index 6739069477de..3b3d599103f8 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic79xx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic79xx
@@ -70,7 +70,7 @@ config AIC79XX_DEBUG_MASK
default "0"
help
Bit mask of debug options that is only valid if the
- CONFIG_AIC79XX_DEBUG_ENBLE option is enabled. The bits in this mask
+ CONFIG_AIC79XX_DEBUG_ENABLE option is enabled. The bits in this mask
are defined in the drivers/scsi/aic7xxx/aic79xx.h - search for the
variable ahd_debug in that file to find them.
diff --git a/drivers/scsi/bnx2fc/Kconfig b/drivers/scsi/bnx2fc/Kconfig
index f245d543d7b1..097882882649 100644
--- a/drivers/scsi/bnx2fc/Kconfig
+++ b/drivers/scsi/bnx2fc/Kconfig
@@ -1,11 +1,12 @@
config SCSI_BNX2X_FCOE
tristate "QLogic NetXtreme II FCoE support"
depends on PCI
+ depends on (IPV6 || IPV6=n)
+ depends on LIBFC
+ depends on LIBFCOE
select NETDEVICES
select ETHERNET
select NET_VENDOR_BROADCOM
- select LIBFC
- select LIBFCOE
select CNIC
---help---
This driver supports FCoE offload for the QLogic NetXtreme II
diff --git a/drivers/scsi/bnx2i/Kconfig b/drivers/scsi/bnx2i/Kconfig
index 44ce54e536e5..ba30ff86d581 100644
--- a/drivers/scsi/bnx2i/Kconfig
+++ b/drivers/scsi/bnx2i/Kconfig
@@ -2,6 +2,7 @@ config SCSI_BNX2_ISCSI
tristate "QLogic NetXtreme II iSCSI support"
depends on NET
depends on PCI
+ depends on (IPV6 || IPV6=n)
select SCSI_ISCSI_ATTRS
select NETDEVICES
select ETHERNET
diff --git a/drivers/scsi/csiostor/Kconfig b/drivers/scsi/csiostor/Kconfig
index 4d03b032aa10..7c7e5085968b 100644
--- a/drivers/scsi/csiostor/Kconfig
+++ b/drivers/scsi/csiostor/Kconfig
@@ -1,7 +1,7 @@
config SCSI_CHELSIO_FCOE
tristate "Chelsio Communications FCoE support"
depends on PCI && SCSI
- select SCSI_FC_ATTRS
+ depends on SCSI_FC_ATTRS
select FW_LOADER
help
This driver supports FCoE Offload functionality over
diff --git a/drivers/scsi/fnic/fnic_debugfs.c b/drivers/scsi/fnic/fnic_debugfs.c
index 2c613bdea78f..5980c10c734d 100644
--- a/drivers/scsi/fnic/fnic_debugfs.c
+++ b/drivers/scsi/fnic/fnic_debugfs.c
@@ -210,7 +210,7 @@ static ssize_t fnic_trace_ctrl_write(struct file *filp,
else if (*trace_type == fc_trc_flag->fc_clear)
fnic_fc_trace_cleared = val;
else
- pr_err("fnic: cannot write to any debufs file\n");
+ pr_err("fnic: cannot write to any debugfs file\n");
(*ppos)++;
diff --git a/drivers/scsi/fnic/fnic_trace.c b/drivers/scsi/fnic/fnic_trace.c
index 121a5d7e98c4..acf1f95cb5c5 100644
--- a/drivers/scsi/fnic/fnic_trace.c
+++ b/drivers/scsi/fnic/fnic_trace.c
@@ -592,7 +592,7 @@ int fnic_fc_trace_set_data(u32 host_no, u8 frame_type,
if (fnic_fc_trace_cleared == 1) {
fc_trace_entries.rd_idx = fc_trace_entries.wr_idx = 0;
- pr_info("fnic: Reseting the read idx\n");
+ pr_info("fnic: Resetting the read idx\n");
memset((void *)fnic_fc_ctlr_trace_buf_p, 0,
fnic_fc_trace_max_pages * PAGE_SIZE);
fnic_fc_trace_cleared = 0;
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 198f75438496..90abb03c9074 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -930,7 +930,7 @@ static int nsp32_queuecommand_lck(struct scsi_cmnd *SCpnt, void (*done)(struct s
/* check target ID is not same as this initiator ID */
if (scmd_id(SCpnt) == SCpnt->device->host->this_id) {
- nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "terget==host???");
+ nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "target==host???");
SCpnt->result = DID_BAD_TARGET << 16;
done(SCpnt);
return 0;
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index 340ceff03823..34aad32829f5 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -533,7 +533,7 @@ static int nsp_negate_signal(struct scsi_cmnd *SCpnt, unsigned char mask,
} while ((--time_out != 0) && (reg & mask) != 0);
if (time_out == 0) {
- nsp_msg(KERN_DEBUG, " %s signal off timeut", str);
+ nsp_msg(KERN_DEBUG, " %s signal off timeout", str);
}
return 0;
diff --git a/drivers/scsi/qla2xxx/Kconfig b/drivers/scsi/qla2xxx/Kconfig
index 23d607218ae8..113e6c9826a1 100644
--- a/drivers/scsi/qla2xxx/Kconfig
+++ b/drivers/scsi/qla2xxx/Kconfig
@@ -1,7 +1,7 @@
config SCSI_QLA_FC
tristate "QLogic QLA2XXX Fibre Channel Support"
depends on PCI && SCSI
- select SCSI_FC_ATTRS
+ depends on SCSI_FC_ATTRS
select FW_LOADER
---help---
This qla2xxx driver supports all QLogic Fibre Channel
@@ -31,7 +31,7 @@ config SCSI_QLA_FC
config TCM_QLA2XXX
tristate "TCM_QLA2XXX fabric module for Qlogic 2xxx series target mode HBAs"
depends on SCSI_QLA_FC && TARGET_CORE
- select LIBFC
+ depends on LIBFC
select BTREE
default n
---help---
diff --git a/drivers/scsi/qla2xxx/qla_nx2.c b/drivers/scsi/qla2xxx/qla_nx2.c
index da9e3902f219..24a852828b5d 100644
--- a/drivers/scsi/qla2xxx/qla_nx2.c
+++ b/drivers/scsi/qla2xxx/qla_nx2.c
@@ -399,7 +399,7 @@ qla8044_idc_lock(struct qla_hw_data *ha)
*/
ql_dbg(ql_dbg_p3p, vha, 0xb08a,
"%s: IDC lock Recovery by %d "
- "failed, Retrying timout\n", __func__,
+ "failed, Retrying timeout\n", __func__,
ha->portnum);
timeout = 0;
}
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index b9a8ddd77eef..db8c449282f9 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -735,12 +735,13 @@ static bool scsi_end_request(struct request *req, int error,
} else {
unsigned long flags;
+ if (bidi_bytes)
+ scsi_release_bidi_buffers(cmd);
+
spin_lock_irqsave(q->queue_lock, flags);
blk_finish_request(req, error);
spin_unlock_irqrestore(q->queue_lock, flags);
- if (bidi_bytes)
- scsi_release_bidi_buffers(cmd);
scsi_release_buffers(cmd);
scsi_next_command(cmd);
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-14 08:09:31 +0000