summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/ufs
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/ufs')
-rw-r--r--drivers/scsi/ufs/ufs.h1
-rw-r--r--drivers/scsi/ufs/ufshcd.c328
-rw-r--r--drivers/scsi/ufs/ufshcd.h54
-rw-r--r--drivers/scsi/ufs/ufshci.h22
-rw-r--r--drivers/scsi/ufs/unipro.h151
5 files changed, 507 insertions, 49 deletions
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index bce09a6898c4..721050090520 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -177,6 +177,7 @@ enum {
MASK_TASK_RESPONSE = 0xFF00,
MASK_RSP_UPIU_RESULT = 0xFFFF,
MASK_QUERY_DATA_SEG_LEN = 0xFFFF,
+ MASK_RSP_UPIU_DATA_SEG_LEN = 0xFFFF,
MASK_RSP_EXCEPTION_EVENT = 0x10000,
};
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index b36ca9a2dfbb..04884d663e4e 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -36,9 +36,11 @@
#include <linux/async.h>
#include "ufshcd.h"
+#include "unipro.h"
#define UFSHCD_ENABLE_INTRS (UTP_TRANSFER_REQ_COMPL |\
UTP_TASK_REQ_COMPL |\
+ UIC_POWER_MODE |\
UFSHCD_ERROR_MASK)
/* UIC command timeout, unit: ms */
#define UIC_CMD_TIMEOUT 500
@@ -56,6 +58,9 @@
/* Expose the flag value from utp_upiu_query.value */
#define MASK_QUERY_UPIU_FLAG_LOC 0xFF
+/* Interrupt aggregation default timeout, unit: 40us */
+#define INT_AGGR_DEF_TO 0x02
+
enum {
UFSHCD_MAX_CHANNEL = 0,
UFSHCD_MAX_ID = 1,
@@ -78,12 +83,6 @@ enum {
UFSHCD_INT_CLEAR,
};
-/* Interrupt aggregation options */
-enum {
- INT_AGGR_RESET,
- INT_AGGR_CONFIG,
-};
-
/*
* ufshcd_wait_for_register - wait for register value to change
* @hba - per-adapter interface
@@ -238,6 +237,18 @@ static inline int ufshcd_get_uic_cmd_result(struct ufs_hba *hba)
}
/**
+ * ufshcd_get_dme_attr_val - Get the value of attribute returned by UIC command
+ * @hba: Pointer to adapter instance
+ *
+ * This function gets UIC command argument3
+ * Returns 0 on success, non zero value on error
+ */
+static inline u32 ufshcd_get_dme_attr_val(struct ufs_hba *hba)
+{
+ return ufshcd_readl(hba, REG_UIC_COMMAND_ARG_3);
+}
+
+/**
* ufshcd_get_req_rsp - returns the TR response transaction type
* @ucd_rsp_ptr: pointer to response UPIU
*/
@@ -260,6 +271,20 @@ ufshcd_get_rsp_upiu_result(struct utp_upiu_rsp *ucd_rsp_ptr)
return be32_to_cpu(ucd_rsp_ptr->header.dword_1) & MASK_RSP_UPIU_RESULT;
}
+/*
+ * ufshcd_get_rsp_upiu_data_seg_len - Get the data segment length
+ * from response UPIU
+ * @ucd_rsp_ptr: pointer to response UPIU
+ *
+ * Return the data segment length.
+ */
+static inline unsigned int
+ufshcd_get_rsp_upiu_data_seg_len(struct utp_upiu_rsp *ucd_rsp_ptr)
+{
+ return be32_to_cpu(ucd_rsp_ptr->header.dword_2) &
+ MASK_RSP_UPIU_DATA_SEG_LEN;
+}
+
/**
* ufshcd_is_exception_event - Check if the device raised an exception event
* @ucd_rsp_ptr: pointer to response UPIU
@@ -276,30 +301,30 @@ static inline bool ufshcd_is_exception_event(struct utp_upiu_rsp *ucd_rsp_ptr)
}
/**
- * ufshcd_config_int_aggr - Configure interrupt aggregation values.
- * Currently there is no use case where we want to configure
- * interrupt aggregation dynamically. So to configure interrupt
- * aggregation, #define INT_AGGR_COUNTER_THRESHOLD_VALUE and
- * INT_AGGR_TIMEOUT_VALUE are used.
+ * ufshcd_reset_intr_aggr - Reset interrupt aggregation values.
* @hba: per adapter instance
- * @option: Interrupt aggregation option
*/
static inline void
-ufshcd_config_int_aggr(struct ufs_hba *hba, int option)
+ufshcd_reset_intr_aggr(struct ufs_hba *hba)
{
- switch (option) {
- case INT_AGGR_RESET:
- ufshcd_writel(hba, INT_AGGR_ENABLE |
- INT_AGGR_COUNTER_AND_TIMER_RESET,
- REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL);
- break;
- case INT_AGGR_CONFIG:
- ufshcd_writel(hba, INT_AGGR_ENABLE | INT_AGGR_PARAM_WRITE |
- INT_AGGR_COUNTER_THRESHOLD_VALUE |
- INT_AGGR_TIMEOUT_VALUE,
- REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL);
- break;
- }
+ ufshcd_writel(hba, INT_AGGR_ENABLE |
+ INT_AGGR_COUNTER_AND_TIMER_RESET,
+ REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL);
+}
+
+/**
+ * ufshcd_config_intr_aggr - Configure interrupt aggregation values.
+ * @hba: per adapter instance
+ * @cnt: Interrupt aggregation counter threshold
+ * @tmout: Interrupt aggregation timeout value
+ */
+static inline void
+ufshcd_config_intr_aggr(struct ufs_hba *hba, u8 cnt, u8 tmout)
+{
+ ufshcd_writel(hba, INT_AGGR_ENABLE | INT_AGGR_PARAM_WRITE |
+ INT_AGGR_COUNTER_THLD_VAL(cnt) |
+ INT_AGGR_TIMEOUT_VAL(tmout),
+ REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL);
}
/**
@@ -355,7 +380,8 @@ void ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag)
static inline void ufshcd_copy_sense_data(struct ufshcd_lrb *lrbp)
{
int len;
- if (lrbp->sense_buffer) {
+ if (lrbp->sense_buffer &&
+ ufshcd_get_rsp_upiu_data_seg_len(lrbp->ucd_rsp_ptr)) {
len = be16_to_cpu(lrbp->ucd_rsp_ptr->sr.sense_data_len);
memcpy(lrbp->sense_buffer,
lrbp->ucd_rsp_ptr->sr.sense_data,
@@ -446,6 +472,18 @@ static inline bool ufshcd_ready_for_uic_cmd(struct ufs_hba *hba)
}
/**
+ * ufshcd_get_upmcrs - Get the power mode change request status
+ * @hba: Pointer to adapter instance
+ *
+ * This function gets the UPMCRS field of HCS register
+ * Returns value of UPMCRS field
+ */
+static inline u8 ufshcd_get_upmcrs(struct ufs_hba *hba)
+{
+ return (ufshcd_readl(hba, REG_CONTROLLER_STATUS) >> 8) & 0x7;
+}
+
+/**
* ufshcd_dispatch_uic_cmd - Dispatch UIC commands to unipro layers
* @hba: per adapter instance
* @uic_cmd: UIC command
@@ -1362,6 +1400,202 @@ static int ufshcd_dme_link_startup(struct ufs_hba *hba)
}
/**
+ * ufshcd_dme_set_attr - UIC command for DME_SET, DME_PEER_SET
+ * @hba: per adapter instance
+ * @attr_sel: uic command argument1
+ * @attr_set: attribute set type as uic command argument2
+ * @mib_val: setting value as uic command argument3
+ * @peer: indicate whether peer or local
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel,
+ u8 attr_set, u32 mib_val, u8 peer)
+{
+ struct uic_command uic_cmd = {0};
+ static const char *const action[] = {
+ "dme-set",
+ "dme-peer-set"
+ };
+ const char *set = action[!!peer];
+ int ret;
+
+ uic_cmd.command = peer ?
+ UIC_CMD_DME_PEER_SET : UIC_CMD_DME_SET;
+ uic_cmd.argument1 = attr_sel;
+ uic_cmd.argument2 = UIC_ARG_ATTR_TYPE(attr_set);
+ uic_cmd.argument3 = mib_val;
+
+ ret = ufshcd_send_uic_cmd(hba, &uic_cmd);
+ if (ret)
+ dev_err(hba->dev, "%s: attr-id 0x%x val 0x%x error code %d\n",
+ set, UIC_GET_ATTR_ID(attr_sel), mib_val, ret);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ufshcd_dme_set_attr);
+
+/**
+ * ufshcd_dme_get_attr - UIC command for DME_GET, DME_PEER_GET
+ * @hba: per adapter instance
+ * @attr_sel: uic command argument1
+ * @mib_val: the value of the attribute as returned by the UIC command
+ * @peer: indicate whether peer or local
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel,
+ u32 *mib_val, u8 peer)
+{
+ struct uic_command uic_cmd = {0};
+ static const char *const action[] = {
+ "dme-get",
+ "dme-peer-get"
+ };
+ const char *get = action[!!peer];
+ int ret;
+
+ uic_cmd.command = peer ?
+ UIC_CMD_DME_PEER_GET : UIC_CMD_DME_GET;
+ uic_cmd.argument1 = attr_sel;
+
+ ret = ufshcd_send_uic_cmd(hba, &uic_cmd);
+ if (ret) {
+ dev_err(hba->dev, "%s: attr-id 0x%x error code %d\n",
+ get, UIC_GET_ATTR_ID(attr_sel), ret);
+ goto out;
+ }
+
+ if (mib_val)
+ *mib_val = uic_cmd.argument3;
+out:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ufshcd_dme_get_attr);
+
+/**
+ * ufshcd_uic_change_pwr_mode - Perform the UIC power mode chage
+ * using DME_SET primitives.
+ * @hba: per adapter instance
+ * @mode: powr mode value
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode)
+{
+ struct uic_command uic_cmd = {0};
+ struct completion pwr_done;
+ unsigned long flags;
+ u8 status;
+ int ret;
+
+ uic_cmd.command = UIC_CMD_DME_SET;
+ uic_cmd.argument1 = UIC_ARG_MIB(PA_PWRMODE);
+ uic_cmd.argument3 = mode;
+ init_completion(&pwr_done);
+
+ mutex_lock(&hba->uic_cmd_mutex);
+
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ hba->pwr_done = &pwr_done;
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+ ret = __ufshcd_send_uic_cmd(hba, &uic_cmd);
+ if (ret) {
+ dev_err(hba->dev,
+ "pwr mode change with mode 0x%x uic error %d\n",
+ mode, ret);
+ goto out;
+ }
+
+ if (!wait_for_completion_timeout(hba->pwr_done,
+ msecs_to_jiffies(UIC_CMD_TIMEOUT))) {
+ dev_err(hba->dev,
+ "pwr mode change with mode 0x%x completion timeout\n",
+ mode);
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+
+ status = ufshcd_get_upmcrs(hba);
+ if (status != PWR_LOCAL) {
+ dev_err(hba->dev,
+ "pwr mode change failed, host umpcrs:0x%x\n",
+ status);
+ ret = (status != PWR_OK) ? status : -1;
+ }
+out:
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ hba->pwr_done = NULL;
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+ mutex_unlock(&hba->uic_cmd_mutex);
+ return ret;
+}
+
+/**
+ * ufshcd_config_max_pwr_mode - Set & Change power mode with
+ * maximum capability attribute information.
+ * @hba: per adapter instance
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int ufshcd_config_max_pwr_mode(struct ufs_hba *hba)
+{
+ enum {RX = 0, TX = 1};
+ u32 lanes[] = {1, 1};
+ u32 gear[] = {1, 1};
+ u8 pwr[] = {FASTAUTO_MODE, FASTAUTO_MODE};
+ int ret;
+
+ /* Get the connected lane count */
+ ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDRXDATALANES), &lanes[RX]);
+ ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), &lanes[TX]);
+
+ /*
+ * First, get the maximum gears of HS speed.
+ * If a zero value, it means there is no HSGEAR capability.
+ * Then, get the maximum gears of PWM speed.
+ */
+ ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR), &gear[RX]);
+ if (!gear[RX]) {
+ ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXPWMGEAR), &gear[RX]);
+ pwr[RX] = SLOWAUTO_MODE;
+ }
+
+ ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR), &gear[TX]);
+ if (!gear[TX]) {
+ ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_MAXRXPWMGEAR),
+ &gear[TX]);
+ pwr[TX] = SLOWAUTO_MODE;
+ }
+
+ /*
+ * Configure attributes for power mode change with below.
+ * - PA_RXGEAR, PA_ACTIVERXDATALANES, PA_RXTERMINATION,
+ * - PA_TXGEAR, PA_ACTIVETXDATALANES, PA_TXTERMINATION,
+ * - PA_HSSERIES
+ */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXGEAR), gear[RX]);
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVERXDATALANES), lanes[RX]);
+ if (pwr[RX] == FASTAUTO_MODE)
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), TRUE);
+
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXGEAR), gear[TX]);
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVETXDATALANES), lanes[TX]);
+ if (pwr[TX] == FASTAUTO_MODE)
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), TRUE);
+
+ if (pwr[RX] == FASTAUTO_MODE || pwr[TX] == FASTAUTO_MODE)
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_HSSERIES), PA_HS_MODE_B);
+
+ ret = ufshcd_uic_change_pwr_mode(hba, pwr[RX] << 4 | pwr[TX]);
+ if (ret)
+ dev_err(hba->dev,
+ "pwr_mode: power mode change failed %d\n", ret);
+
+ return ret;
+}
+
+/**
* ufshcd_complete_dev_init() - checks device readiness
* hba: per-adapter instance
*
@@ -1442,7 +1676,7 @@ static int ufshcd_make_hba_operational(struct ufs_hba *hba)
ufshcd_enable_intr(hba, UFSHCD_ENABLE_INTRS);
/* Configure interrupt aggregation */
- ufshcd_config_int_aggr(hba, INT_AGGR_CONFIG);
+ ufshcd_config_intr_aggr(hba, hba->nutrs - 1, INT_AGGR_DEF_TO);
/* Configure UTRL and UTMRL base address registers */
ufshcd_writel(hba, lower_32_bits(hba->utrdl_dma_addr),
@@ -1788,32 +2022,24 @@ ufshcd_scsi_cmd_status(struct ufshcd_lrb *lrbp, int scsi_status)
int result = 0;
switch (scsi_status) {
- case SAM_STAT_GOOD:
- result |= DID_OK << 16 |
- COMMAND_COMPLETE << 8 |
- SAM_STAT_GOOD;
- break;
case SAM_STAT_CHECK_CONDITION:
+ ufshcd_copy_sense_data(lrbp);
+ case SAM_STAT_GOOD:
result |= DID_OK << 16 |
COMMAND_COMPLETE << 8 |
- SAM_STAT_CHECK_CONDITION;
- ufshcd_copy_sense_data(lrbp);
- break;
- case SAM_STAT_BUSY:
- result |= SAM_STAT_BUSY;
+ scsi_status;
break;
case SAM_STAT_TASK_SET_FULL:
-
/*
* If a LUN reports SAM_STAT_TASK_SET_FULL, then the LUN queue
* depth needs to be adjusted to the exact number of
* outstanding commands the LUN can handle at any given time.
*/
ufshcd_adjust_lun_qdepth(lrbp->cmd);
- result |= SAM_STAT_TASK_SET_FULL;
- break;
+ case SAM_STAT_BUSY:
case SAM_STAT_TASK_ABORTED:
- result |= SAM_STAT_TASK_ABORTED;
+ ufshcd_copy_sense_data(lrbp);
+ result |= scsi_status;
break;
default:
result |= DID_ERROR << 16;
@@ -1898,14 +2124,20 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
/**
* ufshcd_uic_cmd_compl - handle completion of uic command
* @hba: per adapter instance
+ * @intr_status: interrupt status generated by the controller
*/
-static void ufshcd_uic_cmd_compl(struct ufs_hba *hba)
+static void ufshcd_uic_cmd_compl(struct ufs_hba *hba, u32 intr_status)
{
- if (hba->active_uic_cmd) {
+ if ((intr_status & UIC_COMMAND_COMPL) && hba->active_uic_cmd) {
hba->active_uic_cmd->argument2 |=
ufshcd_get_uic_cmd_result(hba);
+ hba->active_uic_cmd->argument3 =
+ ufshcd_get_dme_attr_val(hba);
complete(&hba->active_uic_cmd->done);
}
+
+ if ((intr_status & UIC_POWER_MODE) && hba->pwr_done)
+ complete(hba->pwr_done);
}
/**
@@ -1960,7 +2192,7 @@ static void ufshcd_transfer_req_compl(struct ufs_hba *hba)
/* Reset interrupt aggregation counters */
if (int_aggr_reset)
- ufshcd_config_int_aggr(hba, INT_AGGR_RESET);
+ ufshcd_reset_intr_aggr(hba);
}
/**
@@ -2251,8 +2483,8 @@ static void ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status)
if (hba->errors)
ufshcd_err_handler(hba);
- if (intr_status & UIC_COMMAND_COMPL)
- ufshcd_uic_cmd_compl(hba);
+ if (intr_status & UFSHCD_UIC_MASK)
+ ufshcd_uic_cmd_compl(hba, intr_status);
if (intr_status & UTP_TASK_REQ_COMPL)
ufshcd_tmc_handler(hba);
@@ -2494,6 +2726,8 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie)
if (ret)
goto out;
+ ufshcd_config_max_pwr_mode(hba);
+
ret = ufshcd_verify_dev_init(hba);
if (ret)
goto out;
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 59c9c4848be1..577679a2d189 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -175,6 +175,7 @@ struct ufs_dev_cmd {
* @active_uic_cmd: handle of active UIC command
* @uic_cmd_mutex: mutex for uic command
* @ufshcd_tm_wait_queue: wait queue for task management
+ * @pwr_done: completion for power mode change
* @tm_condition: condition variable for task management
* @ufshcd_state: UFSHCD states
* @intr_mask: Interrupt Mask Bits
@@ -219,6 +220,8 @@ struct ufs_hba {
wait_queue_head_t ufshcd_tm_wait_queue;
unsigned long tm_condition;
+ struct completion *pwr_done;
+
u32 ufshcd_state;
u32 intr_mask;
u16 ee_ctrl_mask;
@@ -263,4 +266,55 @@ static inline void check_upiu_size(void)
extern int ufshcd_runtime_suspend(struct ufs_hba *hba);
extern int ufshcd_runtime_resume(struct ufs_hba *hba);
extern int ufshcd_runtime_idle(struct ufs_hba *hba);
+extern int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel,
+ u8 attr_set, u32 mib_val, u8 peer);
+extern int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel,
+ u32 *mib_val, u8 peer);
+
+/* UIC command interfaces for DME primitives */
+#define DME_LOCAL 0
+#define DME_PEER 1
+#define ATTR_SET_NOR 0 /* NORMAL */
+#define ATTR_SET_ST 1 /* STATIC */
+
+static inline int ufshcd_dme_set(struct ufs_hba *hba, u32 attr_sel,
+ u32 mib_val)
+{
+ return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
+ mib_val, DME_LOCAL);
+}
+
+static inline int ufshcd_dme_st_set(struct ufs_hba *hba, u32 attr_sel,
+ u32 mib_val)
+{
+ return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST,
+ mib_val, DME_LOCAL);
+}
+
+static inline int ufshcd_dme_peer_set(struct ufs_hba *hba, u32 attr_sel,
+ u32 mib_val)
+{
+ return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
+ mib_val, DME_PEER);
+}
+
+static inline int ufshcd_dme_peer_st_set(struct ufs_hba *hba, u32 attr_sel,
+ u32 mib_val)
+{
+ return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST,
+ mib_val, DME_PEER);
+}
+
+static inline int ufshcd_dme_get(struct ufs_hba *hba,
+ u32 attr_sel, u32 *mib_val)
+{
+ return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_LOCAL);
+}
+
+static inline int ufshcd_dme_peer_get(struct ufs_hba *hba,
+ u32 attr_sel, u32 *mib_val)
+{
+ return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_PEER);
+}
+
#endif /* End of Header */
diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
index f1e1b7459107..0475c6619a68 100644
--- a/drivers/scsi/ufs/ufshci.h
+++ b/drivers/scsi/ufs/ufshci.h
@@ -124,6 +124,9 @@ enum {
#define CONTROLLER_FATAL_ERROR UFS_BIT(16)
#define SYSTEM_BUS_FATAL_ERROR UFS_BIT(17)
+#define UFSHCD_UIC_MASK (UIC_COMMAND_COMPL |\
+ UIC_POWER_MODE)
+
#define UFSHCD_ERROR_MASK (UIC_ERROR |\
DEVICE_FATAL_ERROR |\
CONTROLLER_FATAL_ERROR |\
@@ -142,6 +145,15 @@ enum {
#define DEVICE_ERROR_INDICATOR UFS_BIT(5)
#define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK UFS_MASK(0x7, 8)
+enum {
+ PWR_OK = 0x0,
+ PWR_LOCAL = 0x01,
+ PWR_REMOTE = 0x02,
+ PWR_BUSY = 0x03,
+ PWR_ERROR_CAP = 0x04,
+ PWR_FATAL_ERROR = 0x05,
+};
+
/* HCE - Host Controller Enable 34h */
#define CONTROLLER_ENABLE UFS_BIT(0)
#define CONTROLLER_DISABLE 0x0
@@ -191,6 +203,12 @@ enum {
#define CONFIG_RESULT_CODE_MASK 0xFF
#define GENERIC_ERROR_CODE_MASK 0xFF
+#define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
+ ((sel) & 0xFFFF))
+#define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0)
+#define UIC_ARG_ATTR_TYPE(t) (((t) & 0xFF) << 16)
+#define UIC_GET_ATTR_ID(v) (((v) >> 16) & 0xFFFF)
+
/* UIC Commands */
enum {
UIC_CMD_DME_GET = 0x01,
@@ -226,8 +244,8 @@ enum {
#define MASK_UIC_COMMAND_RESULT 0xFF
-#define INT_AGGR_COUNTER_THRESHOLD_VALUE (0x1F << 8)
-#define INT_AGGR_TIMEOUT_VALUE (0x02)
+#define INT_AGGR_COUNTER_THLD_VAL(c) (((c) & 0x1F) << 8)
+#define INT_AGGR_TIMEOUT_VAL(t) (((t) & 0xFF) << 0)
/* Interrupt disable masks */
enum {
diff --git a/drivers/scsi/ufs/unipro.h b/drivers/scsi/ufs/unipro.h
new file mode 100644
index 000000000000..0bb8041c047a
--- /dev/null
+++ b/drivers/scsi/ufs/unipro.h
@@ -0,0 +1,151 @@
+/*
+ * drivers/scsi/ufs/unipro.h
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _UNIPRO_H_
+#define _UNIPRO_H_
+
+/*
+ * PHY Adpater attributes
+ */
+#define PA_ACTIVETXDATALANES 0x1560
+#define PA_ACTIVERXDATALANES 0x1580
+#define PA_TXTRAILINGCLOCKS 0x1564
+#define PA_PHY_TYPE 0x1500
+#define PA_AVAILTXDATALANES 0x1520
+#define PA_AVAILRXDATALANES 0x1540
+#define PA_MINRXTRAILINGCLOCKS 0x1543
+#define PA_TXPWRSTATUS 0x1567
+#define PA_RXPWRSTATUS 0x1582
+#define PA_TXFORCECLOCK 0x1562
+#define PA_TXPWRMODE 0x1563
+#define PA_LEGACYDPHYESCDL 0x1570
+#define PA_MAXTXSPEEDFAST 0x1521
+#define PA_MAXTXSPEEDSLOW 0x1522
+#define PA_MAXRXSPEEDFAST 0x1541
+#define PA_MAXRXSPEEDSLOW 0x1542
+#define PA_TXLINKSTARTUPHS 0x1544
+#define PA_TXSPEEDFAST 0x1565
+#define PA_TXSPEEDSLOW 0x1566
+#define PA_REMOTEVERINFO 0x15A0
+#define PA_TXGEAR 0x1568
+#define PA_TXTERMINATION 0x1569
+#define PA_HSSERIES 0x156A
+#define PA_PWRMODE 0x1571
+#define PA_RXGEAR 0x1583
+#define PA_RXTERMINATION 0x1584
+#define PA_MAXRXPWMGEAR 0x1586
+#define PA_MAXRXHSGEAR 0x1587
+#define PA_RXHSUNTERMCAP 0x15A5
+#define PA_RXLSTERMCAP 0x15A6
+#define PA_PACPREQTIMEOUT 0x1590
+#define PA_PACPREQEOBTIMEOUT 0x1591
+#define PA_HIBERN8TIME 0x15A7
+#define PA_LOCALVERINFO 0x15A9
+#define PA_TACTIVATE 0x15A8
+#define PA_PACPFRAMECOUNT 0x15C0
+#define PA_PACPERRORCOUNT 0x15C1
+#define PA_PHYTESTCONTROL 0x15C2
+#define PA_PWRMODEUSERDATA0 0x15B0
+#define PA_PWRMODEUSERDATA1 0x15B1
+#define PA_PWRMODEUSERDATA2 0x15B2
+#define PA_PWRMODEUSERDATA3 0x15B3
+#define PA_PWRMODEUSERDATA4 0x15B4
+#define PA_PWRMODEUSERDATA5 0x15B5
+#define PA_PWRMODEUSERDATA6 0x15B6
+#define PA_PWRMODEUSERDATA7 0x15B7
+#define PA_PWRMODEUSERDATA8 0x15B8
+#define PA_PWRMODEUSERDATA9 0x15B9
+#define PA_PWRMODEUSERDATA10 0x15BA
+#define PA_PWRMODEUSERDATA11 0x15BB
+#define PA_CONNECTEDTXDATALANES 0x1561
+#define PA_CONNECTEDRXDATALANES 0x1581
+#define PA_LOGICALLANEMAP 0x15A1
+#define PA_SLEEPNOCONFIGTIME 0x15A2
+#define PA_STALLNOCONFIGTIME 0x15A3
+#define PA_SAVECONFIGTIME 0x15A4
+
+/* PA power modes */
+enum {
+ FAST_MODE = 1,
+ SLOW_MODE = 2,
+ FASTAUTO_MODE = 4,
+ SLOWAUTO_MODE = 5,
+ UNCHANGED = 7,
+};
+
+/* PA TX/RX Frequency Series */
+enum {
+ PA_HS_MODE_A = 1,
+ PA_HS_MODE_B = 2,
+};
+
+/*
+ * Data Link Layer Attributes
+ */
+#define DL_TC0TXFCTHRESHOLD 0x2040
+#define DL_FC0PROTTIMEOUTVAL 0x2041
+#define DL_TC0REPLAYTIMEOUTVAL 0x2042
+#define DL_AFC0REQTIMEOUTVAL 0x2043
+#define DL_AFC0CREDITTHRESHOLD 0x2044
+#define DL_TC0OUTACKTHRESHOLD 0x2045
+#define DL_TC1TXFCTHRESHOLD 0x2060
+#define DL_FC1PROTTIMEOUTVAL 0x2061
+#define DL_TC1REPLAYTIMEOUTVAL 0x2062
+#define DL_AFC1REQTIMEOUTVAL 0x2063
+#define DL_AFC1CREDITTHRESHOLD 0x2064
+#define DL_TC1OUTACKTHRESHOLD 0x2065
+#define DL_TXPREEMPTIONCAP 0x2000
+#define DL_TC0TXMAXSDUSIZE 0x2001
+#define DL_TC0RXINITCREDITVAL 0x2002
+#define DL_TC0TXBUFFERSIZE 0x2005
+#define DL_PEERTC0PRESENT 0x2046
+#define DL_PEERTC0RXINITCREVAL 0x2047
+#define DL_TC1TXMAXSDUSIZE 0x2003
+#define DL_TC1RXINITCREDITVAL 0x2004
+#define DL_TC1TXBUFFERSIZE 0x2006
+#define DL_PEERTC1PRESENT 0x2066
+#define DL_PEERTC1RXINITCREVAL 0x2067
+
+/*
+ * Network Layer Attributes
+ */
+#define N_DEVICEID 0x3000
+#define N_DEVICEID_VALID 0x3001
+#define N_TC0TXMAXSDUSIZE 0x3020
+#define N_TC1TXMAXSDUSIZE 0x3021
+
+/*
+ * Transport Layer Attributes
+ */
+#define T_NUMCPORTS 0x4000
+#define T_NUMTESTFEATURES 0x4001
+#define T_CONNECTIONSTATE 0x4020
+#define T_PEERDEVICEID 0x4021
+#define T_PEERCPORTID 0x4022
+#define T_TRAFFICCLASS 0x4023
+#define T_PROTOCOLID 0x4024
+#define T_CPORTFLAGS 0x4025
+#define T_TXTOKENVALUE 0x4026
+#define T_RXTOKENVALUE 0x4027
+#define T_LOCALBUFFERSPACE 0x4028
+#define T_PEERBUFFERSPACE 0x4029
+#define T_CREDITSTOSEND 0x402A
+#define T_CPORTMODE 0x402B
+#define T_TC0TXMAXSDUSIZE 0x4060
+#define T_TC1TXMAXSDUSIZE 0x4061
+
+/* Boolean attribute values */
+enum {
+ FALSE = 0,
+ TRUE,
+};
+
+#endif /* _UNIPRO_H_ */