summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/sata_mv.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/sata_mv.c')
-rw-r--r--drivers/scsi/sata_mv.c1138
1 files changed, 943 insertions, 195 deletions
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index ea76fe44585e..46dbdee79f77 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -29,13 +29,14 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/dma-mapping.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <asm/io.h>
#define DRV_NAME "sata_mv"
-#define DRV_VERSION "0.12"
+#define DRV_VERSION "0.25"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -55,31 +56,61 @@ enum {
MV_SATAHC_ARBTR_REG_SZ = MV_MINOR_REG_AREA_SZ, /* arbiter */
MV_PORT_REG_SZ = MV_MINOR_REG_AREA_SZ,
- MV_Q_CT = 32,
- MV_CRQB_SZ = 32,
- MV_CRPB_SZ = 8,
+ MV_USE_Q_DEPTH = ATA_DEF_QUEUE,
- MV_DMA_BOUNDARY = 0xffffffffU,
- SATAHC_MASK = (~(MV_SATAHC_REG_SZ - 1)),
+ MV_MAX_Q_DEPTH = 32,
+ MV_MAX_Q_DEPTH_MASK = MV_MAX_Q_DEPTH - 1,
+
+ /* CRQB needs alignment on a 1KB boundary. Size == 1KB
+ * CRPB needs alignment on a 256B boundary. Size == 256B
+ * SG count of 176 leads to MV_PORT_PRIV_DMA_SZ == 4KB
+ * ePRD (SG) entries need alignment on a 16B boundary. Size == 16B
+ */
+ MV_CRQB_Q_SZ = (32 * MV_MAX_Q_DEPTH),
+ MV_CRPB_Q_SZ = (8 * MV_MAX_Q_DEPTH),
+ MV_MAX_SG_CT = 176,
+ MV_SG_TBL_SZ = (16 * MV_MAX_SG_CT),
+ MV_PORT_PRIV_DMA_SZ = (MV_CRQB_Q_SZ + MV_CRPB_Q_SZ + MV_SG_TBL_SZ),
+
+ /* Our DMA boundary is determined by an ePRD being unable to handle
+ * anything larger than 64KB
+ */
+ MV_DMA_BOUNDARY = 0xffffU,
MV_PORTS_PER_HC = 4,
/* == (port / MV_PORTS_PER_HC) to determine HC from 0-7 port */
MV_PORT_HC_SHIFT = 2,
- /* == (port % MV_PORTS_PER_HC) to determine port from 0-7 port */
+ /* == (port % MV_PORTS_PER_HC) to determine hard port from 0-7 port */
MV_PORT_MASK = 3,
/* Host Flags */
MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */
MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */
- MV_FLAG_BDMA = (1 << 28), /* Basic DMA */
+ MV_FLAG_GLBL_SFT_RST = (1 << 28), /* Global Soft Reset support */
+ MV_COMMON_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO),
+ MV_6XXX_FLAGS = (MV_FLAG_IRQ_COALESCE |
+ MV_FLAG_GLBL_SFT_RST),
chip_504x = 0,
chip_508x = 1,
chip_604x = 2,
chip_608x = 3,
+ CRQB_FLAG_READ = (1 << 0),
+ CRQB_TAG_SHIFT = 1,
+ CRQB_CMD_ADDR_SHIFT = 8,
+ CRQB_CMD_CS = (0x2 << 11),
+ CRQB_CMD_LAST = (1 << 15),
+
+ CRPB_FLAG_STATUS_SHIFT = 8,
+
+ EPRD_FLAG_END_OF_TBL = (1 << 31),
+
/* PCI interface registers */
+ PCI_COMMAND_OFS = 0xc00,
+
PCI_MAIN_CMD_STS_OFS = 0xd30,
STOP_PCI_MASTER = (1 << 2),
PCI_MASTER_EMPTY = (1 << 3),
@@ -111,20 +142,13 @@ enum {
HC_CFG_OFS = 0,
HC_IRQ_CAUSE_OFS = 0x14,
- CRBP_DMA_DONE = (1 << 0), /* shift by port # */
+ CRPB_DMA_DONE = (1 << 0), /* shift by port # */
HC_IRQ_COAL = (1 << 4), /* IRQ coalescing */
DEV_IRQ = (1 << 8), /* shift by port # */
/* Shadow block registers */
- SHD_PIO_DATA_OFS = 0x100,
- SHD_FEA_ERR_OFS = 0x104,
- SHD_SECT_CNT_OFS = 0x108,
- SHD_LBA_L_OFS = 0x10C,
- SHD_LBA_M_OFS = 0x110,
- SHD_LBA_H_OFS = 0x114,
- SHD_DEV_HD_OFS = 0x118,
- SHD_CMD_STA_OFS = 0x11C,
- SHD_CTL_AST_OFS = 0x120,
+ SHD_BLK_OFS = 0x100,
+ SHD_CTL_AST_OFS = 0x20, /* ofs from SHD_BLK_OFS */
/* SATA registers */
SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */
@@ -132,6 +156,11 @@ enum {
/* Port registers */
EDMA_CFG_OFS = 0,
+ EDMA_CFG_Q_DEPTH = 0, /* queueing disabled */
+ EDMA_CFG_NCQ = (1 << 5),
+ EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */
+ EDMA_CFG_RD_BRST_EXT = (1 << 11), /* read burst 512B */
+ EDMA_CFG_WR_BUFF_LEN = (1 << 13), /* write buffer 512B */
EDMA_ERR_IRQ_CAUSE_OFS = 0x8,
EDMA_ERR_IRQ_MASK_OFS = 0xc,
@@ -161,33 +190,84 @@ enum {
EDMA_ERR_LNK_DATA_TX |
EDMA_ERR_TRANS_PROTO),
+ EDMA_REQ_Q_BASE_HI_OFS = 0x10,
+ EDMA_REQ_Q_IN_PTR_OFS = 0x14, /* also contains BASE_LO */
+ EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U,
+
+ EDMA_REQ_Q_OUT_PTR_OFS = 0x18,
+ EDMA_REQ_Q_PTR_SHIFT = 5,
+
+ EDMA_RSP_Q_BASE_HI_OFS = 0x1c,
+ EDMA_RSP_Q_IN_PTR_OFS = 0x20,
+ EDMA_RSP_Q_OUT_PTR_OFS = 0x24, /* also contains BASE_LO */
+ EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U,
+ EDMA_RSP_Q_PTR_SHIFT = 3,
+
EDMA_CMD_OFS = 0x28,
EDMA_EN = (1 << 0),
EDMA_DS = (1 << 1),
ATA_RST = (1 << 2),
- /* BDMA is 6xxx part only */
- BDMA_CMD_OFS = 0x224,
- BDMA_START = (1 << 0),
+ /* Host private flags (hp_flags) */
+ MV_HP_FLAG_MSI = (1 << 0),
- MV_UNDEF = 0,
+ /* Port private flags (pp_flags) */
+ MV_PP_FLAG_EDMA_EN = (1 << 0),
+ MV_PP_FLAG_EDMA_DS_ACT = (1 << 1),
};
-struct mv_port_priv {
+/* Command ReQuest Block: 32B */
+struct mv_crqb {
+ u32 sg_addr;
+ u32 sg_addr_hi;
+ u16 ctrl_flags;
+ u16 ata_cmd[11];
+};
+/* Command ResPonse Block: 8B */
+struct mv_crpb {
+ u16 id;
+ u16 flags;
+ u32 tmstmp;
};
-struct mv_host_priv {
+/* EDMA Physical Region Descriptor (ePRD); A.K.A. SG */
+struct mv_sg {
+ u32 addr;
+ u32 flags_size;
+ u32 addr_hi;
+ u32 reserved;
+};
+struct mv_port_priv {
+ struct mv_crqb *crqb;
+ dma_addr_t crqb_dma;
+ struct mv_crpb *crpb;
+ dma_addr_t crpb_dma;
+ struct mv_sg *sg_tbl;
+ dma_addr_t sg_tbl_dma;
+
+ unsigned req_producer; /* cp of req_in_ptr */
+ unsigned rsp_consumer; /* cp of rsp_out_ptr */
+ u32 pp_flags;
+};
+
+struct mv_host_priv {
+ u32 hp_flags;
};
static void mv_irq_clear(struct ata_port *ap);
static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in);
static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
static void mv_phy_reset(struct ata_port *ap);
-static int mv_master_reset(void __iomem *mmio_base);
+static void mv_host_stop(struct ata_host_set *host_set);
+static int mv_port_start(struct ata_port *ap);
+static void mv_port_stop(struct ata_port *ap);
+static void mv_qc_prep(struct ata_queued_cmd *qc);
+static int mv_qc_issue(struct ata_queued_cmd *qc);
static irqreturn_t mv_interrupt(int irq, void *dev_instance,
struct pt_regs *regs);
+static void mv_eng_timeout(struct ata_port *ap);
static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
static Scsi_Host_Template mv_sht = {
@@ -196,13 +276,13 @@ static Scsi_Host_Template mv_sht = {
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.eh_strategy_handler = ata_scsi_error,
- .can_queue = ATA_DEF_QUEUE,
+ .can_queue = MV_USE_Q_DEPTH,
.this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = MV_UNDEF,
+ .sg_tablesize = MV_MAX_SG_CT,
.max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
- .use_clustering = MV_UNDEF,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = MV_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
@@ -210,7 +290,7 @@ static Scsi_Host_Template mv_sht = {
.ordered_flush = 1,
};
-static struct ata_port_operations mv_ops = {
+static const struct ata_port_operations mv_ops = {
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
@@ -221,10 +301,10 @@ static struct ata_port_operations mv_ops = {
.phy_reset = mv_phy_reset,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
+ .qc_prep = mv_qc_prep,
+ .qc_issue = mv_qc_issue,
- .eng_timeout = ata_eng_timeout,
+ .eng_timeout = mv_eng_timeout,
.irq_handler = mv_interrupt,
.irq_clear = mv_irq_clear,
@@ -232,46 +312,39 @@ static struct ata_port_operations mv_ops = {
.scr_read = mv_scr_read,
.scr_write = mv_scr_write,
- .port_start = ata_port_start,
- .port_stop = ata_port_stop,
- .host_stop = ata_host_stop,
+ .port_start = mv_port_start,
+ .port_stop = mv_port_stop,
+ .host_stop = mv_host_stop,
};
static struct ata_port_info mv_port_info[] = {
{ /* chip_504x */
.sht = &mv_sht,
- .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO),
- .pio_mask = 0x1f, /* pio4-0 */
- .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */
+ .host_flags = MV_COMMON_FLAGS,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = 0, /* 0x7f (udma0-6 disabled for now) */
.port_ops = &mv_ops,
},
{ /* chip_508x */
.sht = &mv_sht,
- .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
- MV_FLAG_DUAL_HC),
- .pio_mask = 0x1f, /* pio4-0 */
- .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */
+ .host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC),
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = 0, /* 0x7f (udma0-6 disabled for now) */
.port_ops = &mv_ops,
},
{ /* chip_604x */
.sht = &mv_sht,
- .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
- MV_FLAG_IRQ_COALESCE | MV_FLAG_BDMA),
- .pio_mask = 0x1f, /* pio4-0 */
- .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */
+ .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = 0x7f, /* udma0-6 */
.port_ops = &mv_ops,
},
{ /* chip_608x */
.sht = &mv_sht,
- .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
- MV_FLAG_IRQ_COALESCE | MV_FLAG_DUAL_HC |
- MV_FLAG_BDMA),
- .pio_mask = 0x1f, /* pio4-0 */
- .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */
+ .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ MV_FLAG_DUAL_HC),
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = 0x7f, /* udma0-6 */
.port_ops = &mv_ops,
},
};
@@ -306,12 +379,6 @@ static inline void writelfl(unsigned long data, void __iomem *addr)
(void) readl(addr); /* flush to avoid PCI posted write */
}
-static inline void __iomem *mv_port_addr_to_hc_base(void __iomem *port_mmio)
-{
- return ((void __iomem *)((unsigned long)port_mmio &
- (unsigned long)SATAHC_MASK));
-}
-
static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc)
{
return (base + MV_SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ));
@@ -329,24 +396,150 @@ static inline void __iomem *mv_ap_base(struct ata_port *ap)
return mv_port_base(ap->host_set->mmio_base, ap->port_no);
}
-static inline int mv_get_hc_count(unsigned long flags)
+static inline int mv_get_hc_count(unsigned long hp_flags)
{
- return ((flags & MV_FLAG_DUAL_HC) ? 2 : 1);
+ return ((hp_flags & MV_FLAG_DUAL_HC) ? 2 : 1);
}
-static inline int mv_is_edma_active(struct ata_port *ap)
+static void mv_irq_clear(struct ata_port *ap)
+{
+}
+
+/**
+ * mv_start_dma - Enable eDMA engine
+ * @base: port base address
+ * @pp: port private data
+ *
+ * Verify the local cache of the eDMA state is accurate with an
+ * assert.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp)
+{
+ if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) {
+ writelfl(EDMA_EN, base + EDMA_CMD_OFS);
+ pp->pp_flags |= MV_PP_FLAG_EDMA_EN;
+ }
+ assert(EDMA_EN & readl(base + EDMA_CMD_OFS));
+}
+
+/**
+ * mv_stop_dma - Disable eDMA engine
+ * @ap: ATA channel to manipulate
+ *
+ * Verify the local cache of the eDMA state is accurate with an
+ * assert.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_stop_dma(struct ata_port *ap)
{
void __iomem *port_mmio = mv_ap_base(ap);
- return (EDMA_EN & readl(port_mmio + EDMA_CMD_OFS));
+ struct mv_port_priv *pp = ap->private_data;
+ u32 reg;
+ int i;
+
+ if (MV_PP_FLAG_EDMA_EN & pp->pp_flags) {
+ /* Disable EDMA if active. The disable bit auto clears.
+ */
+ writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
+ pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+ } else {
+ assert(!(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)));
+ }
+
+ /* now properly wait for the eDMA to stop */
+ for (i = 1000; i > 0; i--) {
+ reg = readl(port_mmio + EDMA_CMD_OFS);
+ if (!(EDMA_EN & reg)) {
+ break;
+ }
+ udelay(100);
+ }
+
+ if (EDMA_EN & reg) {
+ printk(KERN_ERR "ata%u: Unable to stop eDMA\n", ap->id);
+ /* FIXME: Consider doing a reset here to recover */
+ }
}
-static inline int mv_port_bdma_capable(struct ata_port *ap)
+#ifdef ATA_DEBUG
+static void mv_dump_mem(void __iomem *start, unsigned bytes)
{
- return (ap->flags & MV_FLAG_BDMA);
+ int b, w;
+ for (b = 0; b < bytes; ) {
+ DPRINTK("%p: ", start + b);
+ for (w = 0; b < bytes && w < 4; w++) {
+ printk("%08x ",readl(start + b));
+ b += sizeof(u32);
+ }
+ printk("\n");
+ }
}
+#endif
-static void mv_irq_clear(struct ata_port *ap)
+static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes)
+{
+#ifdef ATA_DEBUG
+ int b, w;
+ u32 dw;
+ for (b = 0; b < bytes; ) {
+ DPRINTK("%02x: ", b);
+ for (w = 0; b < bytes && w < 4; w++) {
+ (void) pci_read_config_dword(pdev,b,&dw);
+ printk("%08x ",dw);
+ b += sizeof(u32);
+ }
+ printk("\n");
+ }
+#endif
+}
+static void mv_dump_all_regs(void __iomem *mmio_base, int port,
+ struct pci_dev *pdev)
{
+#ifdef ATA_DEBUG
+ void __iomem *hc_base = mv_hc_base(mmio_base,
+ port >> MV_PORT_HC_SHIFT);
+ void __iomem *port_base;
+ int start_port, num_ports, p, start_hc, num_hcs, hc;
+
+ if (0 > port) {
+ start_hc = start_port = 0;
+ num_ports = 8; /* shld be benign for 4 port devs */
+ num_hcs = 2;
+ } else {
+ start_hc = port >> MV_PORT_HC_SHIFT;
+ start_port = port;
+ num_ports = num_hcs = 1;
+ }
+ DPRINTK("All registers for port(s) %u-%u:\n", start_port,
+ num_ports > 1 ? num_ports - 1 : start_port);
+
+ if (NULL != pdev) {
+ DPRINTK("PCI config space regs:\n");
+ mv_dump_pci_cfg(pdev, 0x68);
+ }
+ DPRINTK("PCI regs:\n");
+ mv_dump_mem(mmio_base+0xc00, 0x3c);
+ mv_dump_mem(mmio_base+0xd00, 0x34);
+ mv_dump_mem(mmio_base+0xf00, 0x4);
+ mv_dump_mem(mmio_base+0x1d00, 0x6c);
+ for (hc = start_hc; hc < start_hc + num_hcs; hc++) {
+ hc_base = mv_hc_base(mmio_base, port >> MV_PORT_HC_SHIFT);
+ DPRINTK("HC regs (HC %i):\n", hc);
+ mv_dump_mem(hc_base, 0x1c);
+ }
+ for (p = start_port; p < start_port + num_ports; p++) {
+ port_base = mv_port_base(mmio_base, p);
+ DPRINTK("EDMA regs (port %i):\n",p);
+ mv_dump_mem(port_base, 0x54);
+ DPRINTK("SATA regs (port %i):\n",p);
+ mv_dump_mem(port_base+0x300, 0x60);
+ }
+#endif
}
static unsigned int mv_scr_offset(unsigned int sc_reg_in)
@@ -389,30 +582,37 @@ static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
}
}
-static int mv_master_reset(void __iomem *mmio_base)
+/**
+ * mv_global_soft_reset - Perform the 6xxx global soft reset
+ * @mmio_base: base address of the HBA
+ *
+ * This routine only applies to 6xxx parts.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static int mv_global_soft_reset(void __iomem *mmio_base)
{
void __iomem *reg = mmio_base + PCI_MAIN_CMD_STS_OFS;
int i, rc = 0;
u32 t;
- VPRINTK("ENTER\n");
-
/* Following procedure defined in PCI "main command and status
* register" table.
*/
t = readl(reg);
writel(t | STOP_PCI_MASTER, reg);
- for (i = 0; i < 100; i++) {
- msleep(10);
+ for (i = 0; i < 1000; i++) {
+ udelay(1);
t = readl(reg);
if (PCI_MASTER_EMPTY & t) {
break;
}
}
if (!(PCI_MASTER_EMPTY & t)) {
- printk(KERN_ERR DRV_NAME "PCI master won't flush\n");
- rc = 1; /* broken HW? */
+ printk(KERN_ERR DRV_NAME ": PCI master won't flush\n");
+ rc = 1;
goto done;
}
@@ -425,39 +625,399 @@ static int mv_master_reset(void __iomem *mmio_base)
} while (!(GLOB_SFT_RST & t) && (i-- > 0));
if (!(GLOB_SFT_RST & t)) {
- printk(KERN_ERR DRV_NAME "can't set global reset\n");
- rc = 1; /* broken HW? */
+ printk(KERN_ERR DRV_NAME ": can't set global reset\n");
+ rc = 1;
goto done;
}
- /* clear reset */
+ /* clear reset and *reenable the PCI master* (not mentioned in spec) */
i = 5;
do {
- writel(t & ~GLOB_SFT_RST, reg);
+ writel(t & ~(GLOB_SFT_RST | STOP_PCI_MASTER), reg);
t = readl(reg);
udelay(1);
} while ((GLOB_SFT_RST & t) && (i-- > 0));
if (GLOB_SFT_RST & t) {
- printk(KERN_ERR DRV_NAME "can't clear global reset\n");
- rc = 1; /* broken HW? */
+ printk(KERN_ERR DRV_NAME ": can't clear global reset\n");
+ rc = 1;
}
-
- done:
- VPRINTK("EXIT, rc = %i\n", rc);
+done:
return rc;
}
-static void mv_err_intr(struct ata_port *ap)
+/**
+ * mv_host_stop - Host specific cleanup/stop routine.
+ * @host_set: host data structure
+ *
+ * Disable ints, cleanup host memory, call general purpose
+ * host_stop.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_host_stop(struct ata_host_set *host_set)
{
- void __iomem *port_mmio;
- u32 edma_err_cause, serr = 0;
+ struct mv_host_priv *hpriv = host_set->private_data;
+ struct pci_dev *pdev = to_pci_dev(host_set->dev);
+
+ if (hpriv->hp_flags & MV_HP_FLAG_MSI) {
+ pci_disable_msi(pdev);
+ } else {
+ pci_intx(pdev, 0);
+ }
+ kfree(hpriv);
+ ata_host_stop(host_set);
+}
+
+/**
+ * mv_port_start - Port specific init/start routine.
+ * @ap: ATA channel to manipulate
+ *
+ * Allocate and point to DMA memory, init port private memory,
+ * zero indices.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static int mv_port_start(struct ata_port *ap)
+{
+ struct device *dev = ap->host_set->dev;
+ struct mv_port_priv *pp;
+ void __iomem *port_mmio = mv_ap_base(ap);
+ void *mem;
+ dma_addr_t mem_dma;
+
+ pp = kmalloc(sizeof(*pp), GFP_KERNEL);
+ if (!pp) {
+ return -ENOMEM;
+ }
+ memset(pp, 0, sizeof(*pp));
+
+ mem = dma_alloc_coherent(dev, MV_PORT_PRIV_DMA_SZ, &mem_dma,
+ GFP_KERNEL);
+ if (!mem) {
+ kfree(pp);
+ return -ENOMEM;
+ }
+ memset(mem, 0, MV_PORT_PRIV_DMA_SZ);
+
+ /* First item in chunk of DMA memory:
+ * 32-slot command request table (CRQB), 32 bytes each in size
+ */
+ pp->crqb = mem;
+ pp->crqb_dma = mem_dma;
+ mem += MV_CRQB_Q_SZ;
+ mem_dma += MV_CRQB_Q_SZ;
+
+ /* Second item:
+ * 32-slot command response table (CRPB), 8 bytes each in size
+ */
+ pp->crpb = mem;
+ pp->crpb_dma = mem_dma;
+ mem += MV_CRPB_Q_SZ;
+ mem_dma += MV_CRPB_Q_SZ;
+
+ /* Third item:
+ * Table of scatter-gather descriptors (ePRD), 16 bytes each
+ */
+ pp->sg_tbl = mem;
+ pp->sg_tbl_dma = mem_dma;
+
+ writelfl(EDMA_CFG_Q_DEPTH | EDMA_CFG_RD_BRST_EXT |
+ EDMA_CFG_WR_BUFF_LEN, port_mmio + EDMA_CFG_OFS);
- /* bug here b/c we got an err int on a port we don't know about,
- * so there's no way to clear it
+ writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS);
+ writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK,
+ port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+
+ writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
+ writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
+
+ writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS);
+ writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK,
+ port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+
+ pp->req_producer = pp->rsp_consumer = 0;
+
+ /* Don't turn on EDMA here...do it before DMA commands only. Else
+ * we'll be unable to send non-data, PIO, etc due to restricted access
+ * to shadow regs.
*/
- BUG_ON(NULL == ap);
- port_mmio = mv_ap_base(ap);
+ ap->private_data = pp;
+ return 0;
+}
+
+/**
+ * mv_port_stop - Port specific cleanup/stop routine.
+ * @ap: ATA channel to manipulate
+ *
+ * Stop DMA, cleanup port memory.
+ *
+ * LOCKING:
+ * This routine uses the host_set lock to protect the DMA stop.
+ */
+static void mv_port_stop(struct ata_port *ap)
+{
+ struct device *dev = ap->host_set->dev;
+ struct mv_port_priv *pp = ap->private_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ mv_stop_dma(ap);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ ap->private_data = NULL;
+ dma_free_coherent(dev, MV_PORT_PRIV_DMA_SZ, pp->crpb, pp->crpb_dma);
+ kfree(pp);
+}
+
+/**
+ * mv_fill_sg - Fill out the Marvell ePRD (scatter gather) entries
+ * @qc: queued command whose SG list to source from
+ *
+ * Populate the SG list and mark the last entry.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_fill_sg(struct ata_queued_cmd *qc)
+{
+ struct mv_port_priv *pp = qc->ap->private_data;
+ unsigned int i;
+
+ for (i = 0; i < qc->n_elem; i++) {
+ u32 sg_len;
+ dma_addr_t addr;
+
+ addr = sg_dma_address(&qc->sg[i]);
+ sg_len = sg_dma_len(&qc->sg[i]);
+
+ pp->sg_tbl[i].addr = cpu_to_le32(addr & 0xffffffff);
+ pp->sg_tbl[i].addr_hi = cpu_to_le32((addr >> 16) >> 16);
+ assert(0 == (sg_len & ~MV_DMA_BOUNDARY));
+ pp->sg_tbl[i].flags_size = cpu_to_le32(sg_len);
+ }
+ if (0 < qc->n_elem) {
+ pp->sg_tbl[qc->n_elem - 1].flags_size |=
+ cpu_to_le32(EPRD_FLAG_END_OF_TBL);
+ }
+}
+
+static inline unsigned mv_inc_q_index(unsigned *index)
+{
+ *index = (*index + 1) & MV_MAX_Q_DEPTH_MASK;
+ return *index;
+}
+
+static inline void mv_crqb_pack_cmd(u16 *cmdw, u8 data, u8 addr, unsigned last)
+{
+ *cmdw = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS |
+ (last ? CRQB_CMD_LAST : 0);
+}
+
+/**
+ * mv_qc_prep - Host specific command preparation.
+ * @qc: queued command to prepare
+ *
+ * This routine simply redirects to the general purpose routine
+ * if command is not DMA. Else, it handles prep of the CRQB
+ * (command request block), does some sanity checking, and calls
+ * the SG load routine.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_qc_prep(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct mv_port_priv *pp = ap->private_data;
+ u16 *cw;
+ struct ata_taskfile *tf;
+ u16 flags = 0;
+
+ if (ATA_PROT_DMA != qc->tf.protocol) {
+ return;
+ }
+
+ /* the req producer index should be the same as we remember it */
+ assert(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
+ EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
+ pp->req_producer);
+
+ /* Fill in command request block
+ */
+ if (!(qc->tf.flags & ATA_TFLAG_WRITE)) {
+ flags |= CRQB_FLAG_READ;
+ }
+ assert(MV_MAX_Q_DEPTH > qc->tag);
+ flags |= qc->tag << CRQB_TAG_SHIFT;
+
+ pp->crqb[pp->req_producer].sg_addr =
+ cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
+ pp->crqb[pp->req_producer].sg_addr_hi =
+ cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
+ pp->crqb[pp->req_producer].ctrl_flags = cpu_to_le16(flags);
+
+ cw = &pp->crqb[pp->req_producer].ata_cmd[0];
+ tf = &qc->tf;
+
+ /* Sadly, the CRQB cannot accomodate all registers--there are
+ * only 11 bytes...so we must pick and choose required
+ * registers based on the command. So, we drop feature and
+ * hob_feature for [RW] DMA commands, but they are needed for
+ * NCQ. NCQ will drop hob_nsect.
+ */
+ switch (tf->command) {
+ case ATA_CMD_READ:
+ case ATA_CMD_READ_EXT:
+ case ATA_CMD_WRITE:
+ case ATA_CMD_WRITE_EXT:
+ mv_crqb_pack_cmd(cw++, tf->hob_nsect, ATA_REG_NSECT, 0);
+ break;
+#ifdef LIBATA_NCQ /* FIXME: remove this line when NCQ added */
+ case ATA_CMD_FPDMA_READ:
+ case ATA_CMD_FPDMA_WRITE:
+ mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0);
+ mv_crqb_pack_cmd(cw++, tf->feature, ATA_REG_FEATURE, 0);
+ break;
+#endif /* FIXME: remove this line when NCQ added */
+ default:
+ /* The only other commands EDMA supports in non-queued and
+ * non-NCQ mode are: [RW] STREAM DMA and W DMA FUA EXT, none
+ * of which are defined/used by Linux. If we get here, this
+ * driver needs work.
+ *
+ * FIXME: modify libata to give qc_prep a return value and
+ * return error here.
+ */
+ BUG_ON(tf->command);
+ break;
+ }
+ mv_crqb_pack_cmd(cw++, tf->nsect, ATA_REG_NSECT, 0);
+ mv_crqb_pack_cmd(cw++, tf->hob_lbal, ATA_REG_LBAL, 0);
+ mv_crqb_pack_cmd(cw++, tf->lbal, ATA_REG_LBAL, 0);
+ mv_crqb_pack_cmd(cw++, tf->hob_lbam, ATA_REG_LBAM, 0);
+ mv_crqb_pack_cmd(cw++, tf->lbam, ATA_REG_LBAM, 0);
+ mv_crqb_pack_cmd(cw++, tf->hob_lbah, ATA_REG_LBAH, 0);
+ mv_crqb_pack_cmd(cw++, tf->lbah, ATA_REG_LBAH, 0);
+ mv_crqb_pack_cmd(cw++, tf->device, ATA_REG_DEVICE, 0);
+ mv_crqb_pack_cmd(cw++, tf->command, ATA_REG_CMD, 1); /* last */
+
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP)) {
+ return;
+ }
+ mv_fill_sg(qc);
+}
+
+/**
+ * mv_qc_issue - Initiate a command to the host
+ * @qc: queued command to start
+ *
+ * This routine simply redirects to the general purpose routine
+ * if command is not DMA. Else, it sanity checks our local
+ * caches of the request producer/consumer indices then enables
+ * DMA and bumps the request producer index.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static int mv_qc_issue(struct ata_queued_cmd *qc)
+{
+ void __iomem *port_mmio = mv_ap_base(qc->ap);
+ struct mv_port_priv *pp = qc->ap->private_data;
+ u32 in_ptr;
+
+ if (ATA_PROT_DMA != qc->tf.protocol) {
+ /* We're about to send a non-EDMA capable command to the
+ * port. Turn off EDMA so there won't be problems accessing
+ * shadow block, etc registers.
+ */
+ mv_stop_dma(qc->ap);
+ return ata_qc_issue_prot(qc);
+ }
+
+ in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+
+ /* the req producer index should be the same as we remember it */
+ assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
+ pp->req_producer);
+ /* until we do queuing, the queue should be empty at this point */
+ assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
+ ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >>
+ EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
+
+ mv_inc_q_index(&pp->req_producer); /* now incr producer index */
+
+ mv_start_dma(port_mmio, pp);
+
+ /* and write the request in pointer to kick the EDMA to life */
+ in_ptr &= EDMA_REQ_Q_BASE_LO_MASK;
+ in_ptr |= pp->req_producer << EDMA_REQ_Q_PTR_SHIFT;
+ writelfl(in_ptr, port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+
+ return 0;
+}
+
+/**
+ * mv_get_crpb_status - get status from most recently completed cmd
+ * @ap: ATA channel to manipulate
+ *
+ * This routine is for use when the port is in DMA mode, when it
+ * will be using the CRPB (command response block) method of
+ * returning command completion information. We assert indices
+ * are good, grab status, and bump the response consumer index to
+ * prove that we're up to date.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static u8 mv_get_crpb_status(struct ata_port *ap)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+ struct mv_port_priv *pp = ap->private_data;
+ u32 out_ptr;
+
+ out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+
+ /* the response consumer index should be the same as we remember it */
+ assert(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
+ pp->rsp_consumer);
+
+ /* increment our consumer index... */
+ pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer);
+
+ /* and, until we do NCQ, there should only be 1 CRPB waiting */
+ assert(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >>
+ EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
+ pp->rsp_consumer);
+
+ /* write out our inc'd consumer index so EDMA knows we're caught up */
+ out_ptr &= EDMA_RSP_Q_BASE_LO_MASK;
+ out_ptr |= pp->rsp_consumer << EDMA_RSP_Q_PTR_SHIFT;
+ writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+
+ /* Return ATA status register for completed CRPB */
+ return (pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT);
+}
+
+/**
+ * mv_err_intr - Handle error interrupts on the port
+ * @ap: ATA channel to manipulate
+ *
+ * In most cases, just clear the interrupt and move on. However,
+ * some cases require an eDMA reset, which is done right before
+ * the COMRESET in mv_phy_reset(). The SERR case requires a
+ * clear of pending errors in the SATA SERROR register. Finally,
+ * if the port disabled DMA, update our cached copy to match.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_err_intr(struct ata_port *ap)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+ u32 edma_err_cause, serr = 0;
edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
@@ -465,8 +1025,12 @@ static void mv_err_intr(struct ata_port *ap)
serr = scr_read(ap, SCR_ERROR);
scr_write_flush(ap, SCR_ERROR, serr);
}
- DPRINTK("port %u error; EDMA err cause: 0x%08x SERR: 0x%08x\n",
- ap->port_no, edma_err_cause, serr);
+ if (EDMA_ERR_SELF_DIS & edma_err_cause) {
+ struct mv_port_priv *pp = ap->private_data;
+ pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+ }
+ DPRINTK(KERN_ERR "ata%u: port error; EDMA err cause: 0x%08x "
+ "SERR: 0x%08x\n", ap->id, edma_err_cause, serr);
/* Clear EDMA now that SERR cleanup done */
writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
@@ -477,7 +1041,21 @@ static void mv_err_intr(struct ata_port *ap)
}
}
-/* Handle any outstanding interrupts in a single SATAHC
+/**
+ * mv_host_intr - Handle all interrupts on the given host controller
+ * @host_set: host specific structure
+ * @relevant: port error bits relevant to this host controller
+ * @hc: which host controller we're to look at
+ *
+ * Read then write clear the HC interrupt status then walk each
+ * port connected to the HC and see if it needs servicing. Port
+ * success ints are reported in the HC interrupt status reg, the
+ * port error ints are reported in the higher level main
+ * interrupt status register and thus are passed in via the
+ * 'relevant' argument.
+ *
+ * LOCKING:
+ * Inherited from caller.
*/
static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
unsigned int hc)
@@ -487,8 +1065,9 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
struct ata_port *ap;
struct ata_queued_cmd *qc;
u32 hc_irq_cause;
- int shift, port, port0, hard_port;
- u8 ata_status;
+ int shift, port, port0, hard_port, handled;
+ unsigned int err_mask;
+ u8 ata_status = 0;
if (hc == 0) {
port0 = 0;
@@ -499,7 +1078,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
/* we'll need the HC success int register in most cases */
hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
if (hc_irq_cause) {
- writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS);
+ writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
}
VPRINTK("ENTER, hc%u relevant=0x%08x HC IRQ cause=0x%08x\n",
@@ -508,54 +1087,70 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) {
ap = host_set->ports[port];
hard_port = port & MV_PORT_MASK; /* range 0-3 */
- ata_status = 0xffU;
+ handled = 0; /* ensure ata_status is set if handled++ */
- if (((CRBP_DMA_DONE | DEV_IRQ) << hard_port) & hc_irq_cause) {
- BUG_ON(NULL == ap);
- /* rcv'd new resp, basic DMA complete, or ATA IRQ */
- /* This is needed to clear the ATA INTRQ.
- * FIXME: don't read the status reg in EDMA mode!
+ if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause) {
+ /* new CRPB on the queue; just one at a time until NCQ
+ */
+ ata_status = mv_get_crpb_status(ap);
+ handled++;
+ } else if ((DEV_IRQ << hard_port) & hc_irq_cause) {
+ /* received ATA IRQ; read the status reg to clear INTRQ
*/
ata_status = readb((void __iomem *)
ap->ioaddr.status_addr);
+ handled++;
}
- shift = port * 2;
+ err_mask = ac_err_mask(ata_status);
+
+ shift = port << 1; /* (port * 2) */
if (port >= MV_PORTS_PER_HC) {
shift++; /* skip bit 8 in the HC Main IRQ reg */
}
if ((PORT0_ERR << shift) & relevant) {
mv_err_intr(ap);
- /* FIXME: smart to OR in ATA_ERR? */
- ata_status = readb((void __iomem *)
- ap->ioaddr.status_addr) | ATA_ERR;
+ err_mask |= AC_ERR_OTHER;
+ handled++;
}
- if (ap) {
+ if (handled && ap) {
qc = ata_qc_from_tag(ap, ap->active_tag);
if (NULL != qc) {
VPRINTK("port %u IRQ found for qc, "
"ata_status 0x%x\n", port,ata_status);
- BUG_ON(0xffU == ata_status);
/* mark qc status appropriately */
- ata_qc_complete(qc, ata_status);
+ ata_qc_complete(qc, err_mask);
}
}
}
VPRINTK("EXIT\n");
}
+/**
+ * mv_interrupt -
+ * @irq: unused
+ * @dev_instance: private data; in this case the host structure
+ * @regs: unused
+ *
+ * Read the read only register to determine if any host
+ * controllers have pending interrupts. If so, call lower level
+ * routine to handle. Also check for PCI errors which are only
+ * reported here.
+ *
+ * LOCKING:
+ * This routine holds the host_set lock while processing pending
+ * interrupts.
+ */
static irqreturn_t mv_interrupt(int irq, void *dev_instance,
struct pt_regs *regs)
{
struct ata_host_set *host_set = dev_instance;
unsigned int hc, handled = 0, n_hcs;
- void __iomem *mmio;
+ void __iomem *mmio = host_set->mmio_base;
u32 irq_stat;
- mmio = host_set->mmio_base;
irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS);
- n_hcs = mv_get_hc_count(host_set->ports[0]->flags);
/* check the cases where we either have nothing pending or have read
* a bogus register value which can indicate HW removal or PCI fault
@@ -564,64 +1159,89 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance,
return IRQ_NONE;
}
+ n_hcs = mv_get_hc_count(host_set->ports[0]->flags);
spin_lock(&host_set->lock);
for (hc = 0; hc < n_hcs; hc++) {
u32 relevant = irq_stat & (HC0_IRQ_PEND << (hc * HC_SHIFT));
if (relevant) {
mv_host_intr(host_set, relevant, hc);
- handled = 1;
+ handled++;
}
}
if (PCI_ERR & irq_stat) {
- /* FIXME: these are all masked by default, but still need
- * to recover from them properly.
- */
- }
+ printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n",
+ readl(mmio + PCI_IRQ_CAUSE_OFS));
+ DPRINTK("All regs @ PCI error\n");
+ mv_dump_all_regs(mmio, -1, to_pci_dev(host_set->dev));
+
+ writelfl(0, mmio + PCI_IRQ_CAUSE_OFS);
+ handled++;
+ }
spin_unlock(&host_set->lock);
return IRQ_RETVAL(handled);
}
+/**
+ * mv_phy_reset - Perform eDMA reset followed by COMRESET
+ * @ap: ATA channel to manipulate
+ *
+ * Part of this is taken from __sata_phy_reset and modified to
+ * not sleep since this routine gets called from interrupt level.
+ *
+ * LOCKING:
+ * Inherited from caller. This is coded to safe to call at
+ * interrupt level, i.e. it does not sleep.
+ */
static void mv_phy_reset(struct ata_port *ap)
{
void __iomem *port_mmio = mv_ap_base(ap);
struct ata_taskfile tf;
struct ata_device *dev = &ap->device[0];
- u32 edma = 0, bdma;
+ unsigned long timeout;
VPRINTK("ENTER, port %u, mmio 0x%p\n", ap->port_no, port_mmio);
- edma = readl(port_mmio + EDMA_CMD_OFS);
- if (EDMA_EN & edma) {
- /* disable EDMA if active */
- edma &= ~EDMA_EN;
- writelfl(edma | EDMA_DS, port_mmio + EDMA_CMD_OFS);
- udelay(1);
- } else if (mv_port_bdma_capable(ap) &&
- (bdma = readl(port_mmio + BDMA_CMD_OFS)) & BDMA_START) {
- /* disable BDMA if active */
- writelfl(bdma & ~BDMA_START, port_mmio + BDMA_CMD_OFS);
- }
+ mv_stop_dma(ap);
- writelfl(edma | ATA_RST, port_mmio + EDMA_CMD_OFS);
+ writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS);
udelay(25); /* allow reset propagation */
/* Spec never mentions clearing the bit. Marvell's driver does
* clear the bit, however.
*/
- writelfl(edma & ~ATA_RST, port_mmio + EDMA_CMD_OFS);
+ writelfl(0, port_mmio + EDMA_CMD_OFS);
- VPRINTK("Done. Now calling __sata_phy_reset()\n");
+ VPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x "
+ "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS),
+ mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL));
/* proceed to init communications via the scr_control reg */
- __sata_phy_reset(ap);
+ scr_write_flush(ap, SCR_CONTROL, 0x301);
+ mdelay(1);
+ scr_write_flush(ap, SCR_CONTROL, 0x300);
+ timeout = jiffies + (HZ * 1);
+ do {
+ mdelay(10);
+ if ((scr_read(ap, SCR_STATUS) & 0xf) != 1)
+ break;
+ } while (time_before(jiffies, timeout));
+
+ VPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x "
+ "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS),
+ mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL));
- if (ap->flags & ATA_FLAG_PORT_DISABLED) {
- VPRINTK("Port disabled pre-sig. Exiting.\n");
+ if (sata_dev_present(ap)) {
+ ata_port_probe(ap);
+ } else {
+ printk(KERN_INFO "ata%u: no device found (phy stat %08x)\n",
+ ap->id, scr_read(ap, SCR_STATUS));
+ ata_port_disable(ap);
return;
}
+ ap->cbl = ATA_CBL_SATA;
tf.lbah = readb((void __iomem *) ap->ioaddr.lbah_addr);
tf.lbam = readb((void __iomem *) ap->ioaddr.lbam_addr);
@@ -636,37 +1256,118 @@ static void mv_phy_reset(struct ata_port *ap)
VPRINTK("EXIT\n");
}
-static void mv_port_init(struct ata_ioports *port, unsigned long base)
+/**
+ * mv_eng_timeout - Routine called by libata when SCSI times out I/O
+ * @ap: ATA channel to manipulate
+ *
+ * Intent is to clear all pending error conditions, reset the
+ * chip/bus, fail the command, and move on.
+ *
+ * LOCKING:
+ * This routine holds the host_set lock while failing the command.
+ */
+static void mv_eng_timeout(struct ata_port *ap)
+{
+ struct ata_queued_cmd *qc;
+ unsigned long flags;
+
+ printk(KERN_ERR "ata%u: Entering mv_eng_timeout\n",ap->id);
+ DPRINTK("All regs @ start of eng_timeout\n");
+ mv_dump_all_regs(ap->host_set->mmio_base, ap->port_no,
+ to_pci_dev(ap->host_set->dev));
+
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ printk(KERN_ERR "mmio_base %p ap %p qc %p scsi_cmnd %p &cmnd %p\n",
+ ap->host_set->mmio_base, ap, qc, qc->scsicmd,
+ &qc->scsicmd->cmnd);
+
+ mv_err_intr(ap);
+ mv_phy_reset(ap);
+
+ if (!qc) {
+ printk(KERN_ERR "ata%u: BUG: timeout without command\n",
+ ap->id);
+ } else {
+ /* hack alert! We cannot use the supplied completion
+ * function from inside the ->eh_strategy_handler() thread.
+ * libata is the only user of ->eh_strategy_handler() in
+ * any kernel, so the default scsi_done() assumes it is
+ * not being called from the SCSI EH.
+ */
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ qc->scsidone = scsi_finish_command;
+ ata_qc_complete(qc, AC_ERR_OTHER);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+ }
+}
+
+/**
+ * mv_port_init - Perform some early initialization on a single port.
+ * @port: libata data structure storing shadow register addresses
+ * @port_mmio: base address of the port
+ *
+ * Initialize shadow register mmio addresses, clear outstanding
+ * interrupts on the port, and unmask interrupts for the future
+ * start of the port.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio)
{
- /* PIO related setup */
- port->data_addr = base + SHD_PIO_DATA_OFS;
- port->error_addr = port->feature_addr = base + SHD_FEA_ERR_OFS;
- port->nsect_addr = base + SHD_SECT_CNT_OFS;
- port->lbal_addr = base + SHD_LBA_L_OFS;
- port->lbam_addr = base + SHD_LBA_M_OFS;
- port->lbah_addr = base + SHD_LBA_H_OFS;
- port->device_addr = base + SHD_DEV_HD_OFS;
- port->status_addr = port->command_addr = base + SHD_CMD_STA_OFS;
- port->altstatus_addr = port->ctl_addr = base + SHD_CTL_AST_OFS;
- /* unused */
+ unsigned long shd_base = (unsigned long) port_mmio + SHD_BLK_OFS;
+ unsigned serr_ofs;
+
+ /* PIO related setup
+ */
+ port->data_addr = shd_base + (sizeof(u32) * ATA_REG_DATA);
+ port->error_addr =
+ port->feature_addr = shd_base + (sizeof(u32) * ATA_REG_ERR);
+ port->nsect_addr = shd_base + (sizeof(u32) * ATA_REG_NSECT);
+ port->lbal_addr = shd_base + (sizeof(u32) * ATA_REG_LBAL);
+ port->lbam_addr = shd_base + (sizeof(u32) * ATA_REG_LBAM);
+ port->lbah_addr = shd_base + (sizeof(u32) * ATA_REG_LBAH);
+ port->device_addr = shd_base + (sizeof(u32) * ATA_REG_DEVICE);
+ port->status_addr =
+ port->command_addr = shd_base + (sizeof(u32) * ATA_REG_STATUS);
+ /* special case: control/altstatus doesn't have ATA_REG_ address */
+ port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST_OFS;
+
+ /* unused: */
port->cmd_addr = port->bmdma_addr = port->scr_addr = 0;
+ /* Clear any currently outstanding port interrupt conditions */
+ serr_ofs = mv_scr_offset(SCR_ERROR);
+ writelfl(readl(port_mmio + serr_ofs), port_mmio + serr_ofs);
+ writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+
/* unmask all EDMA error interrupts */
- writel(~0, (void __iomem *)base + EDMA_ERR_IRQ_MASK_OFS);
+ writelfl(~0, port_mmio + EDMA_ERR_IRQ_MASK_OFS);
VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n",
- readl((void __iomem *)base + EDMA_CFG_OFS),
- readl((void __iomem *)base + EDMA_ERR_IRQ_CAUSE_OFS),
- readl((void __iomem *)base + EDMA_ERR_IRQ_MASK_OFS));
+ readl(port_mmio + EDMA_CFG_OFS),
+ readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS),
+ readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS));
}
+/**
+ * mv_host_init - Perform some early initialization of the host.
+ * @probe_ent: early data struct representing the host
+ *
+ * If possible, do an early global reset of the host. Then do
+ * our port init and clear/unmask all/relevant host interrupts.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
static int mv_host_init(struct ata_probe_ent *probe_ent)
{
int rc = 0, n_hc, port, hc;
void __iomem *mmio = probe_ent->mmio_base;
void __iomem *port_mmio;
- if (mv_master_reset(probe_ent->mmio_base)) {
+ if ((MV_FLAG_GLBL_SFT_RST & probe_ent->host_flags) &&
+ mv_global_soft_reset(probe_ent->mmio_base)) {
rc = 1;
goto done;
}
@@ -676,17 +1377,27 @@ static int mv_host_init(struct ata_probe_ent *probe_ent)
for (port = 0; port < probe_ent->n_ports; port++) {
port_mmio = mv_port_base(mmio, port);
- mv_port_init(&probe_ent->port[port], (unsigned long)port_mmio);
+ mv_port_init(&probe_ent->port[port], port_mmio);
}
for (hc = 0; hc < n_hc; hc++) {
- VPRINTK("HC%i: HC config=0x%08x HC IRQ cause=0x%08x\n", hc,
- readl(mv_hc_base(mmio, hc) + HC_CFG_OFS),
- readl(mv_hc_base(mmio, hc) + HC_IRQ_CAUSE_OFS));
+ void __iomem *hc_mmio = mv_hc_base(mmio, hc);
+
+ VPRINTK("HC%i: HC config=0x%08x HC IRQ cause "
+ "(before clear)=0x%08x\n", hc,
+ readl(hc_mmio + HC_CFG_OFS),
+ readl(hc_mmio + HC_IRQ_CAUSE_OFS));
+
+ /* Clear any currently outstanding hc interrupt conditions */
+ writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS);
}
- writel(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS);
- writel(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS);
+ /* Clear any currently outstanding host interrupt conditions */
+ writelfl(0, mmio + PCI_IRQ_CAUSE_OFS);
+
+ /* and unmask interrupt generation for host regs */
+ writelfl(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS);
+ writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS);
VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x "
"PCI int cause/mask=0x%08x/0x%08x\n",
@@ -694,11 +1405,53 @@ static int mv_host_init(struct ata_probe_ent *probe_ent)
readl(mmio + HC_MAIN_IRQ_MASK_OFS),
readl(mmio + PCI_IRQ_CAUSE_OFS),
readl(mmio + PCI_IRQ_MASK_OFS));
-
- done:
+done:
return rc;
}
+/**
+ * mv_print_info - Dump key info to kernel log for perusal.
+ * @probe_ent: early data struct representing the host
+ *
+ * FIXME: complete this.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_print_info(struct ata_probe_ent *probe_ent)
+{
+ struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
+ struct mv_host_priv *hpriv = probe_ent->private_data;
+ u8 rev_id, scc;
+ const char *scc_s;
+
+ /* Use this to determine the HW stepping of the chip so we know
+ * what errata to workaround
+ */
+ pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
+
+ pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &scc);
+ if (scc == 0)
+ scc_s = "SCSI";
+ else if (scc == 0x01)
+ scc_s = "RAID";
+ else
+ scc_s = "unknown";
+
+ dev_printk(KERN_INFO, &pdev->dev,
+ "%u slots %u ports %s mode IRQ via %s\n",
+ (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports,
+ scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx");
+}
+
+/**
+ * mv_init_one - handle a positive probe of a Marvell host
+ * @pdev: PCI device found
+ * @ent: PCI device ID entry for the matched host
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version = 0;
@@ -706,15 +1459,10 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
struct mv_host_priv *hpriv;
unsigned int board_idx = (unsigned int)ent->driver_data;
void __iomem *mmio_base;
- int pci_dev_busy = 0;
- int rc;
+ int pci_dev_busy = 0, rc;
- if (!printed_version++) {
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
- }
-
- VPRINTK("ENTER for PCI Bus:Slot.Func=%u:%u.%u\n", pdev->bus->number,
- PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+ if (!printed_version++)
+ dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
rc = pci_enable_device(pdev);
if (rc) {
@@ -727,8 +1475,6 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_out;
}
- pci_intx(pdev, 1);
-
probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
if (probe_ent == NULL) {
rc = -ENOMEM;
@@ -739,8 +1485,7 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
probe_ent->dev = pci_dev_to_dev(pdev);
INIT_LIST_HEAD(&probe_ent->node);
- mmio_base = ioremap_nocache(pci_resource_start(pdev, MV_PRIMARY_BAR),
- pci_resource_len(pdev, MV_PRIMARY_BAR));
+ mmio_base = pci_iomap(pdev, MV_PRIMARY_BAR, 0);
if (mmio_base == NULL) {
rc = -ENOMEM;
goto err_out_free_ent;
@@ -769,37 +1514,40 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (rc) {
goto err_out_hpriv;
}
-/* mv_print_info(probe_ent); */
- {
- int b, w;
- u32 dw[4]; /* hold a line of 16b */
- VPRINTK("PCI config space:\n");
- for (b = 0; b < 0x40; ) {
- for (w = 0; w < 4; w++) {
- (void) pci_read_config_dword(pdev,b,&dw[w]);
- b += sizeof(*dw);
- }
- VPRINTK("%08x %08x %08x %08x\n",
- dw[0],dw[1],dw[2],dw[3]);
- }
+ /* Enable interrupts */
+ if (pci_enable_msi(pdev) == 0) {
+ hpriv->hp_flags |= MV_HP_FLAG_MSI;
+ } else {
+ pci_intx(pdev, 1);
}
- /* FIXME: check ata_device_add return value */
- ata_device_add(probe_ent);
- kfree(probe_ent);
+ mv_dump_pci_cfg(pdev, 0x68);
+ mv_print_info(probe_ent);
+
+ if (ata_device_add(probe_ent) == 0) {
+ rc = -ENODEV; /* No devices discovered */
+ goto err_out_dev_add;
+ }
+ kfree(probe_ent);
return 0;
- err_out_hpriv:
+err_out_dev_add:
+ if (MV_HP_FLAG_MSI & hpriv->hp_flags) {
+ pci_disable_msi(pdev);
+ } else {
+ pci_intx(pdev, 0);
+ }
+err_out_hpriv:
kfree(hpriv);
- err_out_iounmap:
- iounmap(mmio_base);
- err_out_free_ent:
+err_out_iounmap:
+ pci_iounmap(pdev, mmio_base);
+err_out_free_ent:
kfree(probe_ent);
- err_out_regions:
+err_out_regions:
pci_release_regions(pdev);
- err_out:
+err_out:
if (!pci_dev_busy) {
pci_disable_device(pdev);
}