summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla2xxx/qla_sup.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_sup.c')
-rw-r--r--drivers/scsi/qla2xxx/qla_sup.c221
1 files changed, 166 insertions, 55 deletions
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index a925a3f179f9..40b059fc1981 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -425,6 +425,9 @@ qla2x00_set_nvram_protection(scsi_qla_host_t *ha, int stat)
/* Flash Manipulation Routines */
/*****************************************************************************/
+#define OPTROM_BURST_SIZE 0x1000
+#define OPTROM_BURST_DWORDS (OPTROM_BURST_SIZE / 4)
+
static inline uint32_t
flash_conf_to_access_addr(uint32_t faddr)
{
@@ -544,41 +547,59 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
uint32_t dwords)
{
int ret;
- uint32_t liter;
- uint32_t sec_mask, rest_addr, conf_addr, sec_end_mask;
+ uint32_t liter, miter;
+ uint32_t sec_mask, rest_addr, conf_addr;
uint32_t fdata, findex ;
uint8_t man_id, flash_id;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
+ dma_addr_t optrom_dma;
+ void *optrom = NULL;
+ uint32_t *s, *d;
ret = QLA_SUCCESS;
+ /* Prepare burst-capable write on supported ISPs. */
+ if (IS_QLA25XX(ha) && !(faddr & 0xfff) &&
+ dwords > OPTROM_BURST_DWORDS) {
+ optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
+ &optrom_dma, GFP_KERNEL);
+ if (!optrom) {
+ qla_printk(KERN_DEBUG, ha,
+ "Unable to allocate memory for optrom burst write "
+ "(%x KB).\n", OPTROM_BURST_SIZE / 1024);
+ }
+ }
+
qla24xx_get_flash_manufacturer(ha, &man_id, &flash_id);
DEBUG9(printk("%s(%ld): Flash man_id=%d flash_id=%d\n", __func__,
ha->host_no, man_id, flash_id));
- sec_end_mask = 0;
conf_addr = flash_conf_to_access_addr(0x03d8);
switch (man_id) {
case 0xbf: /* STT flash. */
- rest_addr = 0x1fff;
- sec_mask = 0x3e000;
+ if (flash_id == 0x8e) {
+ rest_addr = 0x3fff;
+ sec_mask = 0x7c000;
+ } else {
+ rest_addr = 0x1fff;
+ sec_mask = 0x7e000;
+ }
if (flash_id == 0x80)
conf_addr = flash_conf_to_access_addr(0x0352);
break;
case 0x13: /* ST M25P80. */
rest_addr = 0x3fff;
- sec_mask = 0x3c000;
+ sec_mask = 0x7c000;
break;
case 0x1f: // Atmel 26DF081A
- rest_addr = 0x0fff;
- sec_mask = 0xff000;
- sec_end_mask = 0x003ff;
+ rest_addr = 0x3fff;
+ sec_mask = 0x7c000;
conf_addr = flash_conf_to_access_addr(0x0320);
break;
default:
/* Default to 64 kb sector size. */
rest_addr = 0x3fff;
- sec_mask = 0x3c000;
+ sec_mask = 0x7c000;
break;
}
@@ -592,56 +613,81 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
/* Some flash parts need an additional zero-write to clear bits.*/
qla24xx_write_flash_dword(ha, flash_conf_to_access_addr(0x101), 0);
- do { /* Loop once to provide quick error exit. */
- for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
- if (man_id == 0x1f) {
- findex = faddr << 2;
- fdata = findex & sec_mask;
- } else {
- findex = faddr;
- fdata = (findex & sec_mask) << 2;
- }
+ for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
+ if (man_id == 0x1f) {
+ findex = faddr << 2;
+ fdata = findex & sec_mask;
+ } else {
+ findex = faddr;
+ fdata = (findex & sec_mask) << 2;
+ }
- /* Are we at the beginning of a sector? */
- if ((findex & rest_addr) == 0) {
- /*
- * Do sector unprotect at 4K boundry for Atmel
- * part.
- */
- if (man_id == 0x1f)
- qla24xx_write_flash_dword(ha,
- flash_conf_to_access_addr(0x0339),
- (fdata & 0xff00) | ((fdata << 16) &
- 0xff0000) | ((fdata >> 16) & 0xff));
- ret = qla24xx_write_flash_dword(ha, conf_addr,
- (fdata & 0xff00) |((fdata << 16) &
+ /* Are we at the beginning of a sector? */
+ if ((findex & rest_addr) == 0) {
+ /* Do sector unprotect at 4K boundry for Atmel part. */
+ if (man_id == 0x1f)
+ qla24xx_write_flash_dword(ha,
+ flash_conf_to_access_addr(0x0339),
+ (fdata & 0xff00) | ((fdata << 16) &
0xff0000) | ((fdata >> 16) & 0xff));
- if (ret != QLA_SUCCESS) {
- DEBUG9(printk("%s(%ld) Unable to flash "
- "sector: address=%x.\n", __func__,
- ha->host_no, faddr));
- break;
- }
+ ret = qla24xx_write_flash_dword(ha, conf_addr,
+ (fdata & 0xff00) |((fdata << 16) &
+ 0xff0000) | ((fdata >> 16) & 0xff));
+ if (ret != QLA_SUCCESS) {
+ DEBUG9(printk("%s(%ld) Unable to flash "
+ "sector: address=%x.\n", __func__,
+ ha->host_no, faddr));
+ break;
}
- ret = qla24xx_write_flash_dword(ha,
+ }
+
+ /* Go with burst-write. */
+ if (optrom && (liter + OPTROM_BURST_DWORDS) < dwords) {
+ /* Copy data to DMA'ble buffer. */
+ for (miter = 0, s = optrom, d = dwptr;
+ miter < OPTROM_BURST_DWORDS; miter++, s++, d++)
+ *s = cpu_to_le32(*d);
+
+ ret = qla2x00_load_ram(ha, optrom_dma,
flash_data_to_access_addr(faddr),
- cpu_to_le32(*dwptr));
+ OPTROM_BURST_DWORDS);
if (ret != QLA_SUCCESS) {
- DEBUG9(printk("%s(%ld) Unable to program flash "
- "address=%x data=%x.\n", __func__,
- ha->host_no, faddr, *dwptr));
- break;
+ qla_printk(KERN_WARNING, ha,
+ "Unable to burst-write optrom segment "
+ "(%x/%x/%llx).\n", ret,
+ flash_data_to_access_addr(faddr),
+ optrom_dma);
+ qla_printk(KERN_WARNING, ha,
+ "Reverting to slow-write.\n");
+
+ dma_free_coherent(&ha->pdev->dev,
+ OPTROM_BURST_SIZE, optrom, optrom_dma);
+ optrom = NULL;
+ } else {
+ liter += OPTROM_BURST_DWORDS - 1;
+ faddr += OPTROM_BURST_DWORDS - 1;
+ dwptr += OPTROM_BURST_DWORDS - 1;
+ continue;
}
+ }
- /* Do sector protect at 4K boundry for Atmel part. */
- if (man_id == 0x1f &&
- ((faddr & sec_end_mask) == 0x3ff))
- qla24xx_write_flash_dword(ha,
- flash_conf_to_access_addr(0x0336),
- (fdata & 0xff00) | ((fdata << 16) &
- 0xff0000) | ((fdata >> 16) & 0xff));
+ ret = qla24xx_write_flash_dword(ha,
+ flash_data_to_access_addr(faddr), cpu_to_le32(*dwptr));
+ if (ret != QLA_SUCCESS) {
+ DEBUG9(printk("%s(%ld) Unable to program flash "
+ "address=%x data=%x.\n", __func__,
+ ha->host_no, faddr, *dwptr));
+ break;
}
- } while (0);
+
+ /* Do sector protect at 4K boundry for Atmel part. */
+ if (man_id == 0x1f &&
+ ((faddr & rest_addr) == rest_addr))
+ qla24xx_write_flash_dword(ha,
+ flash_conf_to_access_addr(0x0336),
+ (fdata & 0xff00) | ((fdata << 16) &
+ 0xff0000) | ((fdata >> 16) & 0xff));
+ }
/* Enable flash write-protection. */
qla24xx_write_flash_dword(ha, flash_conf_to_access_addr(0x101), 0x9c);
@@ -651,6 +697,10 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
RD_REG_DWORD(&reg->ctrl_status) & ~CSRX_FLASH_ENABLE);
RD_REG_DWORD(&reg->ctrl_status); /* PCI Posting. */
+ if (optrom)
+ dma_free_coherent(&ha->pdev->dev,
+ OPTROM_BURST_SIZE, optrom, optrom_dma);
+
return ret;
}
@@ -1728,7 +1778,6 @@ qla24xx_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
{
/* Suspend HBA. */
scsi_block_requests(ha->host);
- ha->isp_ops->disable_intrs(ha);
set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
/* Go with read. */
@@ -1736,7 +1785,6 @@ qla24xx_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
/* Resume HBA. */
clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
- ha->isp_ops->enable_intrs(ha);
scsi_unblock_requests(ha->host);
return buf;
@@ -1750,7 +1798,6 @@ qla24xx_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
/* Suspend HBA. */
scsi_block_requests(ha->host);
- ha->isp_ops->disable_intrs(ha);
set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
/* Go with write. */
@@ -1767,6 +1814,70 @@ qla24xx_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
return rval;
}
+uint8_t *
+qla25xx_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
+ uint32_t offset, uint32_t length)
+{
+ int rval;
+ dma_addr_t optrom_dma;
+ void *optrom;
+ uint8_t *pbuf;
+ uint32_t faddr, left, burst;
+
+ if (offset & 0xfff)
+ goto slow_read;
+ if (length < OPTROM_BURST_SIZE)
+ goto slow_read;
+
+ optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
+ &optrom_dma, GFP_KERNEL);
+ if (!optrom) {
+ qla_printk(KERN_DEBUG, ha,
+ "Unable to allocate memory for optrom burst read "
+ "(%x KB).\n", OPTROM_BURST_SIZE / 1024);
+
+ goto slow_read;
+ }
+
+ pbuf = buf;
+ faddr = offset >> 2;
+ left = length >> 2;
+ burst = OPTROM_BURST_DWORDS;
+ while (left != 0) {
+ if (burst > left)
+ burst = left;
+
+ rval = qla2x00_dump_ram(ha, optrom_dma,
+ flash_data_to_access_addr(faddr), burst);
+ if (rval) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to burst-read optrom segment "
+ "(%x/%x/%llx).\n", rval,
+ flash_data_to_access_addr(faddr), optrom_dma);
+ qla_printk(KERN_WARNING, ha,
+ "Reverting to slow-read.\n");
+
+ dma_free_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
+ optrom, optrom_dma);
+ goto slow_read;
+ }
+
+ memcpy(pbuf, optrom, burst * 4);
+
+ left -= burst;
+ faddr += burst;
+ pbuf += burst * 4;
+ }
+
+ dma_free_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE, optrom,
+ optrom_dma);
+
+ return buf;
+
+slow_read:
+ return qla24xx_read_optrom_data(ha, buf, offset, length);
+}
+
/**
* qla2x00_get_fcode_version() - Determine an FCODE image's version.
* @ha: HA context
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 13:06:33 +0000