summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla2xxx/qla_isr.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_isr.c')
-rw-r--r--drivers/scsi/qla2xxx/qla_isr.c133
1 files changed, 87 insertions, 46 deletions
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 550a4a31f51a..a04a1b1f7f32 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -56,16 +56,8 @@ qla2100_intr_handler(int irq, void *dev_id)
vha = pci_get_drvdata(ha->pdev);
for (iter = 50; iter--; ) {
hccr = RD_REG_WORD(&reg->hccr);
- /* Check for PCI disconnection */
- if (hccr == 0xffff) {
- /*
- * Schedule this on the default system workqueue so that
- * all the adapter workqueues and the DPC thread can be
- * shutdown cleanly.
- */
- schedule_work(&ha->board_disable);
+ if (qla2x00_check_reg16_for_disconnect(vha, hccr))
break;
- }
if (hccr & HCCR_RISC_PAUSE) {
if (pci_channel_offline(ha->pdev))
break;
@@ -121,21 +113,31 @@ qla2100_intr_handler(int irq, void *dev_id)
}
bool
-qla2x00_check_reg_for_disconnect(scsi_qla_host_t *vha, uint32_t reg)
+qla2x00_check_reg32_for_disconnect(scsi_qla_host_t *vha, uint32_t reg)
{
/* Check for PCI disconnection */
if (reg == 0xffffffff) {
- /*
- * Schedule this on the default system workqueue so that all the
- * adapter workqueues and the DPC thread can be shutdown
- * cleanly.
- */
- schedule_work(&vha->hw->board_disable);
+ if (!test_and_set_bit(PFLG_DISCONNECTED, &vha->pci_flags) &&
+ !test_bit(PFLG_DRIVER_REMOVING, &vha->pci_flags) &&
+ !test_bit(PFLG_DRIVER_PROBING, &vha->pci_flags)) {
+ /*
+ * Schedule this (only once) on the default system
+ * workqueue so that all the adapter workqueues and the
+ * DPC thread can be shutdown cleanly.
+ */
+ schedule_work(&vha->hw->board_disable);
+ }
return true;
} else
return false;
}
+bool
+qla2x00_check_reg16_for_disconnect(scsi_qla_host_t *vha, uint16_t reg)
+{
+ return qla2x00_check_reg32_for_disconnect(vha, 0xffff0000 | reg);
+}
+
/**
* qla2300_intr_handler() - Process interrupts for the ISP23xx and ISP63xx.
* @irq:
@@ -174,7 +176,7 @@ qla2300_intr_handler(int irq, void *dev_id)
vha = pci_get_drvdata(ha->pdev);
for (iter = 50; iter--; ) {
stat = RD_REG_DWORD(&reg->u.isp2300.host_status);
- if (qla2x00_check_reg_for_disconnect(vha, stat))
+ if (qla2x00_check_reg32_for_disconnect(vha, stat))
break;
if (stat & HSR_RISC_PAUSED) {
if (unlikely(pci_channel_offline(ha->pdev)))
@@ -573,8 +575,9 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb)
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
struct device_reg_24xx __iomem *reg24 = &ha->iobase->isp24;
struct device_reg_82xx __iomem *reg82 = &ha->iobase->isp82;
- uint32_t rscn_entry, host_pid;
+ uint32_t rscn_entry, host_pid, tmp_pid;
unsigned long flags;
+ fc_port_t *fcport = NULL;
/* Setup to process RIO completion. */
handle_cnt = 0;
@@ -730,7 +733,7 @@ skip_rio:
else
ha->link_data_rate = mb[1];
- ql_dbg(ql_dbg_async, vha, 0x500a,
+ ql_log(ql_log_info, vha, 0x500a,
"LOOP UP detected (%s Gbps).\n",
qla2x00_get_link_speed_str(ha, ha->link_data_rate));
@@ -743,13 +746,23 @@ skip_rio:
? RD_REG_WORD(&reg24->mailbox4) : 0;
mbx = (IS_P3P_TYPE(ha)) ? RD_REG_WORD(&reg82->mailbox_out[4])
: mbx;
- ql_dbg(ql_dbg_async, vha, 0x500b,
+ ql_log(ql_log_info, vha, 0x500b,
"LOOP DOWN detected (%x %x %x %x).\n",
mb[1], mb[2], mb[3], mbx);
if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
atomic_set(&vha->loop_state, LOOP_DOWN);
atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
+ /*
+ * In case of loop down, restore WWPN from
+ * NVRAM in case of FA-WWPN capable ISP
+ */
+ if (ha->flags.fawwpn_enabled) {
+ void *wwpn = ha->init_cb->port_name;
+
+ memcpy(vha->port_name, wwpn, WWN_SIZE);
+ }
+
vha->device_flags |= DFLG_NO_CABLE;
qla2x00_mark_all_devices_lost(vha, 1);
}
@@ -908,7 +921,8 @@ skip_rio:
* it. Otherwise ignore it and Wait for RSCN to come in.
*/
atomic_set(&vha->loop_down_timer, 0);
- if (mb[1] != 0xffff || (mb[2] != 0x6 && mb[2] != 0x4)) {
+ if (atomic_read(&vha->loop_state) != LOOP_DOWN &&
+ atomic_read(&vha->loop_state) != LOOP_DEAD) {
ql_dbg(ql_dbg_async, vha, 0x5011,
"Asynchronous PORT UPDATE ignored %04x/%04x/%04x.\n",
mb[1], mb[2], mb[3]);
@@ -920,9 +934,6 @@ skip_rio:
ql_dbg(ql_dbg_async, vha, 0x5012,
"Port database changed %04x %04x %04x.\n",
mb[1], mb[2], mb[3]);
- ql_log(ql_log_warn, vha, 0x505f,
- "Link is operational (%s Gbps).\n",
- qla2x00_get_link_speed_str(ha, ha->link_data_rate));
/*
* Mark all devices as missing so we will login again.
@@ -969,6 +980,20 @@ skip_rio:
if (qla2x00_is_a_vp_did(vha, rscn_entry))
break;
+ /*
+ * Search for the rport related to this RSCN entry and mark it
+ * as lost.
+ */
+ list_for_each_entry(fcport, &vha->vp_fcports, list) {
+ if (atomic_read(&fcport->state) != FCS_ONLINE)
+ continue;
+ tmp_pid = fcport->d_id.b24;
+ if (fcport->d_id.b24 == rscn_entry) {
+ qla2x00_mark_device_lost(vha, fcport, 0, 0);
+ break;
+ }
+ }
+
atomic_set(&vha->loop_down_timer, 0);
vha->flags.management_server_logged_in = 0;
@@ -1086,6 +1111,14 @@ skip_rio:
qla83xx_handle_8200_aen(vha, mb);
break;
+ case MBA_DPORT_DIAGNOSTICS:
+ ql_dbg(ql_dbg_async, vha, 0x5052,
+ "D-Port Diagnostics: %04x %04x=%s\n", mb[0], mb[1],
+ mb[1] == 0 ? "start" :
+ mb[1] == 1 ? "done (ok)" :
+ mb[1] == 2 ? "done (error)" : "other");
+ break;
+
default:
ql_dbg(ql_dbg_async, vha, 0x5057,
"Unknown AEN:%04x %04x %04x %04x\n",
@@ -1975,6 +2008,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
int logit = 1;
int res = 0;
uint16_t state_flags = 0;
+ uint16_t retry_delay = 0;
sts = (sts_entry_t *) pkt;
sts24 = (struct sts_entry_24xx *) pkt;
@@ -2068,6 +2102,9 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
host_to_fcp_swap(sts24->data, sizeof(sts24->data));
ox_id = le16_to_cpu(sts24->ox_id);
par_sense_len = sizeof(sts24->data);
+ /* Valid values of the retry delay timer are 0x1-0xffef */
+ if (sts24->retry_delay > 0 && sts24->retry_delay < 0xfff1)
+ retry_delay = sts24->retry_delay;
} else {
if (scsi_status & SS_SENSE_LEN_VALID)
sense_len = le16_to_cpu(sts->req_sense_length);
@@ -2102,6 +2139,14 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
comp_status = CS_DATA_OVERRUN;
/*
+ * Check retry_delay_timer value if we receive a busy or
+ * queue full.
+ */
+ if (lscsi_status == SAM_STAT_TASK_SET_FULL ||
+ lscsi_status == SAM_STAT_BUSY)
+ qla2x00_set_retry_delay_timestamp(fcport, retry_delay);
+
+ /*
* Based on Host and scsi status generate status code for Linux
*/
switch (comp_status) {
@@ -2633,7 +2678,7 @@ qla24xx_intr_handler(int irq, void *dev_id)
vha = pci_get_drvdata(ha->pdev);
for (iter = 50; iter--; ) {
stat = RD_REG_DWORD(&reg->host_status);
- if (qla2x00_check_reg_for_disconnect(vha, stat))
+ if (qla2x00_check_reg32_for_disconnect(vha, stat))
break;
if (stat & HSRX_RISC_PAUSED) {
if (unlikely(pci_channel_offline(ha->pdev)))
@@ -2723,7 +2768,7 @@ qla24xx_msix_rsp_q(int irq, void *dev_id)
* we process the response queue.
*/
stat = RD_REG_DWORD(&reg->host_status);
- if (qla2x00_check_reg_for_disconnect(vha, stat))
+ if (qla2x00_check_reg32_for_disconnect(vha, stat))
goto out;
qla24xx_process_response_queue(vha, rsp);
if (!ha->flags.disable_msix_handshake) {
@@ -2763,7 +2808,7 @@ qla25xx_msix_rsp_q(int irq, void *dev_id)
hccr = RD_REG_DWORD_RELAXED(&reg->hccr);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
- if (qla2x00_check_reg_for_disconnect(vha, hccr))
+ if (qla2x00_check_reg32_for_disconnect(vha, hccr))
goto out;
queue_work_on((int) (rsp->id - 1), ha->wq, &rsp->q_work);
@@ -2798,7 +2843,7 @@ qla24xx_msix_default(int irq, void *dev_id)
vha = pci_get_drvdata(ha->pdev);
do {
stat = RD_REG_DWORD(&reg->host_status);
- if (qla2x00_check_reg_for_disconnect(vha, stat))
+ if (qla2x00_check_reg32_for_disconnect(vha, stat))
break;
if (stat & HSRX_RISC_PAUSED) {
if (unlikely(pci_channel_offline(ha->pdev)))
@@ -2923,27 +2968,22 @@ qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp)
for (i = 0; i < ha->msix_count; i++)
entries[i].entry = i;
- ret = pci_enable_msix(ha->pdev, entries, ha->msix_count);
- if (ret) {
- if (ret < MIN_MSIX_COUNT)
- goto msix_failed;
-
+ ret = pci_enable_msix_range(ha->pdev,
+ entries, MIN_MSIX_COUNT, ha->msix_count);
+ if (ret < 0) {
+ ql_log(ql_log_fatal, vha, 0x00c7,
+ "MSI-X: Failed to enable support, "
+ "giving up -- %d/%d.\n",
+ ha->msix_count, ret);
+ goto msix_out;
+ } else if (ret < ha->msix_count) {
ql_log(ql_log_warn, vha, 0x00c6,
"MSI-X: Failed to enable support "
"-- %d/%d\n Retry with %d vectors.\n",
ha->msix_count, ret, ret);
- ha->msix_count = ret;
- ret = pci_enable_msix(ha->pdev, entries, ha->msix_count);
- if (ret) {
-msix_failed:
- ql_log(ql_log_fatal, vha, 0x00c7,
- "MSI-X: Failed to enable support, "
- "giving up -- %d/%d.\n",
- ha->msix_count, ret);
- goto msix_out;
- }
- ha->max_rsp_queues = ha->msix_count - 1;
}
+ ha->msix_count = ret;
+ ha->max_rsp_queues = ha->msix_count - 1;
ha->msix_entries = kzalloc(sizeof(struct qla_msix_entry) *
ha->msix_count, GFP_KERNEL);
if (!ha->msix_entries) {
@@ -3103,10 +3143,11 @@ skip_msi:
}
clear_risc_ints:
+ if (IS_FWI2_CAPABLE(ha) || IS_QLAFX00(ha))
+ goto fail;
spin_lock_irq(&ha->hardware_lock);
- if (!IS_FWI2_CAPABLE(ha))
- WRT_REG_WORD(&reg->isp.semaphore, 0);
+ WRT_REG_WORD(&reg->isp.semaphore, 0);
spin_unlock_irq(&ha->hardware_lock);
fail: