summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/mpt3sas
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/mpt3sas')
-rw-r--r--drivers/scsi/mpt3sas/Kconfig2
-rw-r--r--drivers/scsi/mpt3sas/mpi/mpi2.h12
-rw-r--r--drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h15
-rw-r--r--drivers/scsi/mpt3sas/mpi/mpi2_init.h2
-rw-r--r--drivers/scsi/mpt3sas/mpi/mpi2_ioc.h10
-rw-r--r--drivers/scsi/mpt3sas/mpi/mpi2_raid.h10
-rw-r--r--drivers/scsi/mpt3sas/mpi/mpi2_sas.h2
-rw-r--r--drivers/scsi/mpt3sas/mpi/mpi2_tool.h10
-rw-r--r--drivers/scsi/mpt3sas/mpi/mpi2_type.h2
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_base.c22
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_base.h8
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_config.c2
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_ctl.c2
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_ctl.h2
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_debug.h2
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_scsih.c54
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_transport.c2
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c2
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h2
19 files changed, 103 insertions, 60 deletions
diff --git a/drivers/scsi/mpt3sas/Kconfig b/drivers/scsi/mpt3sas/Kconfig
index 81471bf415d8..d53e1b02e893 100644
--- a/drivers/scsi/mpt3sas/Kconfig
+++ b/drivers/scsi/mpt3sas/Kconfig
@@ -2,7 +2,7 @@
# Kernel configuration file for the MPT3SAS
#
# This code is based on drivers/scsi/mpt3sas/Kconfig
-# Copyright (C) 2012 LSI Corporation
+# Copyright (C) 2012-2013 LSI Corporation
# (mailto:DL-MPTFusionLinux@lsi.com)
# This program is free software; you can redistribute it and/or
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2.h b/drivers/scsi/mpt3sas/mpi/mpi2.h
index 03317ffea62c..20da8f907c00 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2000-2012 LSI Corporation.
+ * Copyright (c) 2000-2013 LSI Corporation.
*
*
* Name: mpi2.h
@@ -8,7 +8,7 @@
* scatter/gather formats.
* Creation Date: June 21, 2006
*
- * mpi2.h Version: 02.00.26
+ * mpi2.h Version: 02.00.29
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -82,6 +82,10 @@
* 03-29-12 02.00.25 Bumped MPI2_HEADER_VERSION_UNIT.
* Added Hard Reset delay timings.
* 07-10-12 02.00.26 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 07-26-12 02.00.27 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 11-27-12 02.00.28 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 12-20-12 02.00.29 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET.
* --------------------------------------------------------------------------
*/
@@ -115,7 +119,7 @@
#define MPI2_VERSION_02_05 (0x0205)
/*Unit and Dev versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT (0x1A)
+#define MPI2_HEADER_VERSION_UNIT (0x1D)
#define MPI2_HEADER_VERSION_DEV (0x00)
#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
@@ -274,6 +278,8 @@ typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS {
#define MPI2_REPLY_POST_HOST_INDEX_MASK (0x00FFFFFF)
#define MPI2_RPHI_MSIX_INDEX_MASK (0xFF000000)
#define MPI2_RPHI_MSIX_INDEX_SHIFT (24)
+#define MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET (0x0000030C) /*MPI v2.5 only*/
+
/*
*Defines for the HCBSize and address
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
index d8b2c3eedb57..889aa7067899 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
@@ -1,12 +1,12 @@
/*
- * Copyright (c) 2000-2011 LSI Corporation.
+ * Copyright (c) 2000-2013 LSI Corporation.
*
*
* Name: mpi2_cnfg.h
* Title: MPI Configuration messages and pages
* Creation Date: November 10, 2006
*
- * mpi2_cnfg.h Version: 02.00.22
+ * mpi2_cnfg.h Version: 02.00.24
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -155,6 +155,11 @@
* Added UEFIVersion field to BIOS Page 1 and defined new
* BiosOptions bits.
* Incorporating additions for MPI v2.5.
+ * 11-27-12 02.00.23 Added MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER.
+ * Added MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID.
+ * 12-20-12 02.00.24 Marked MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION as
+ * obsolete for MPI v2.5 and later.
+ * Added some defines for 12G SAS speeds.
* --------------------------------------------------------------------------
*/
@@ -714,6 +719,7 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_7 {
#define MPI2_MANUFACTURING7_PAGEVERSION (0x01)
/*defines for the Flags field */
+#define MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER (0x00000002)
#define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001)
@@ -1310,6 +1316,9 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 {
#define MPI2_BIOSPAGE1_PAGEVERSION (0x05)
/*values for BIOS Page 1 BiosOptions field */
+#define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID (0x000000F0)
+#define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID (0x00000000)
+
#define MPI2_BIOSPAGE1_OPTIONS_MASK_UEFI_HII_REGISTRATION (0x00000006)
#define MPI2_BIOSPAGE1_OPTIONS_ENABLE_UEFI_HII (0x00000000)
#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_UEFI_HII (0x00000002)
@@ -1884,6 +1893,7 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 {
#define MPI2_SAS_PRATE_MAX_RATE_1_5 (0x80)
#define MPI2_SAS_PRATE_MAX_RATE_3_0 (0x90)
#define MPI2_SAS_PRATE_MAX_RATE_6_0 (0xA0)
+#define MPI25_SAS_PRATE_MAX_RATE_12_0 (0xB0)
#define MPI2_SAS_PRATE_MIN_RATE_MASK (0x0F)
#define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00)
#define MPI2_SAS_PRATE_MIN_RATE_1_5 (0x08)
@@ -1897,6 +1907,7 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 {
#define MPI2_SAS_HWRATE_MAX_RATE_1_5 (0x80)
#define MPI2_SAS_HWRATE_MAX_RATE_3_0 (0x90)
#define MPI2_SAS_HWRATE_MAX_RATE_6_0 (0xA0)
+#define MPI25_SAS_HWRATE_MAX_RATE_12_0 (0xB0)
#define MPI2_SAS_HWRATE_MIN_RATE_MASK (0x0F)
#define MPI2_SAS_HWRATE_MIN_RATE_1_5 (0x08)
#define MPI2_SAS_HWRATE_MIN_RATE_3_0 (0x09)
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_init.h b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
index a079e5242474..f7928bf66478 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_init.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2000-2012 LSI Corporation.
+ * Copyright (c) 2000-2013 LSI Corporation.
*
*
* Name: mpi2_init.h
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
index 0de425d8fd70..e2bb82143720 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
@@ -1,12 +1,12 @@
/*
- * Copyright (c) 2000-2012 LSI Corporation.
+ * Copyright (c) 2000-2013 LSI Corporation.
*
*
* Name: mpi2_ioc.h
* Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
* Creation Date: October 11, 2006
*
- * mpi2_ioc.h Version: 02.00.21
+ * mpi2_ioc.h Version: 02.00.22
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -124,6 +124,9 @@
* Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete.
* 11-18-11 02.00.20 Incorporating additions for MPI v2.5.
* 03-29-12 02.00.21 Added a product specific range to event values.
+ * 07-26-12 02.00.22 Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE.
+ * Added ElapsedSeconds field to
+ * MPI2_EVENT_DATA_IR_OPERATION_STATUS.
* --------------------------------------------------------------------------
*/
@@ -283,6 +286,7 @@ typedef struct _MPI2_IOC_FACTS_REPLY {
#define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0)
/*IOCExceptions */
+#define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0200)
#define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100)
#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x00E0)
@@ -634,7 +638,7 @@ typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS {
U8 RAIDOperation; /*0x04 */
U8 PercentComplete; /*0x05 */
U16 Reserved2; /*0x06 */
- U32 Resereved3; /*0x08 */
+ U32 ElapsedSeconds; /*0x08 */
} MPI2_EVENT_DATA_IR_OPERATION_STATUS,
*PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS,
Mpi2EventDataIrOperationStatus_t,
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_raid.h b/drivers/scsi/mpt3sas/mpi/mpi2_raid.h
index d1d9866cf300..71765236afef 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_raid.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_raid.h
@@ -1,12 +1,12 @@
/*
- * Copyright (c) 2000-2012 LSI Corporation.
+ * Copyright (c) 2000-2013 LSI Corporation.
*
*
* Name: mpi2_raid.h
* Title: MPI Integrated RAID messages and structures
* Creation Date: April 26, 2007
*
- * mpi2_raid.h Version: 02.00.08
+ * mpi2_raid.h Version: 02.00.09
*
* Version History
* ---------------
@@ -28,6 +28,8 @@
* Added product-specific range to RAID Action values.
* 11-18-11 02.00.07 Incorporating additions for MPI v2.5.
* 02-06-12 02.00.08 Added MPI2_RAID_ACTION_PHYSDISK_HIDDEN.
+ * 07-26-12 02.00.09 Added ElapsedSeconds field to MPI2_RAID_VOL_INDICATOR.
+ * Added MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID define.
* --------------------------------------------------------------------------
*/
@@ -269,10 +271,12 @@ typedef struct _MPI2_RAID_VOL_INDICATOR {
U64 TotalBlocks; /*0x00 */
U64 BlocksRemaining; /*0x08 */
U32 Flags; /*0x10 */
+ U32 ElapsedSeconds; /* 0x14 */
} MPI2_RAID_VOL_INDICATOR, *PTR_MPI2_RAID_VOL_INDICATOR,
Mpi2RaidVolIndicator_t, *pMpi2RaidVolIndicator_t;
/*defines for RAID Volume Indicator Flags field */
+#define MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID (0x80000000)
#define MPI2_RAID_VOL_FLAGS_OP_MASK (0x0000000F)
#define MPI2_RAID_VOL_FLAGS_OP_BACKGROUND_INIT (0x00000000)
#define MPI2_RAID_VOL_FLAGS_OP_ONLINE_CAP_EXPANSION (0x00000001)
@@ -312,7 +316,7 @@ typedef struct _MPI2_RAID_COMPATIBILITY_RESULT_STRUCT {
/*RAID Action Reply ActionData union */
typedef union _MPI2_RAID_ACTION_REPLY_DATA {
- U32 Word[5];
+ U32 Word[6];
MPI2_RAID_VOL_INDICATOR RaidVolumeIndicator;
U16 VolDevHandle;
U8 VolumeState;
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_sas.h b/drivers/scsi/mpt3sas/mpi/mpi2_sas.h
index b4e7084aba31..cba046f6a4b4 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_sas.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_sas.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2000-2012 LSI Corporation.
+ * Copyright (c) 2000-2013 LSI Corporation.
*
*
* Name: mpi2_sas.h
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_tool.h b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h
index 71453d11c1c1..34e9a7ba76b0 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_tool.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h
@@ -1,12 +1,12 @@
/*
- * Copyright (c) 2000-2012 LSI Corporation.
+ * Copyright (c) 2000-2013 LSI Corporation.
*
*
* Name: mpi2_tool.h
* Title: MPI diagnostic tool structures and definitions
* Creation Date: March 26, 2007
*
- * mpi2_tool.h Version: 02.00.09
+ * mpi2_tool.h Version: 02.00.10
*
* Version History
* ---------------
@@ -30,6 +30,8 @@
* 11-18-11 02.00.08 Incorporating additions for MPI v2.5.
* 07-10-12 02.00.09 Add MPI v2.5 Toolbox Diagnostic CLI Tool Request
* message.
+ * 07-26-12 02.00.10 Modified MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST so that
+ * it uses MPI Chain SGE as well as MPI Simple SGE.
* --------------------------------------------------------------------------
*/
@@ -279,7 +281,7 @@ typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST {
U16 Reserved6; /*0x0E */
U32 DataLength; /*0x10 */
U8 DiagnosticCliCommand[MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH];/*0x14 */
- MPI2_SGE_SIMPLE_UNION SGL; /*0x70 */
+ MPI2_MPI_SGE_IO_UNION SGL; /*0x70 */
} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
*PTR_MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
Mpi2ToolboxDiagnosticCliRequest_t,
@@ -302,7 +304,7 @@ typedef struct _MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST {
U32 Reserved5; /*0x0C */
U32 DataLength; /*0x10 */
U8 DiagnosticCliCommand[MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH];/*0x14 */
- MPI25_SGE_IO_UNION SGL; /*0x70 */
+ MPI25_SGE_IO_UNION SGL; /* 0x70 */
} MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
*PTR_MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
Mpi25ToolboxDiagnosticCliRequest_t,
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_type.h b/drivers/scsi/mpt3sas/mpi/mpi2_type.h
index 516f959573f5..ba1fed50966e 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_type.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_type.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2000-2007 LSI Corporation.
+ * Copyright (c) 2000-2013 LSI Corporation.
*
*
* Name: mpi2_type.h
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 18360032a520..5dc280c75325 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -3,7 +3,7 @@
* for access to MPT (Message Passing Technology) firmware.
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c
- * Copyright (C) 2012 LSI Corporation
+ * Copyright (C) 2012-2013 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
@@ -4090,11 +4090,15 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER,
&ioc->chip->HostDiagnostic);
- /* don't access any registers for 50 milliseconds */
- msleep(50);
+ /*This delay allows the chip PCIe hardware time to finish reset tasks*/
+ if (sleep_flag == CAN_SLEEP)
+ msleep(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000);
+ else
+ mdelay(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000);
- /* 300 second max wait */
- for (count = 0; count < 3000000 ; count++) {
+ /* Approximately 300 second max wait */
+ for (count = 0; count < (300000000 /
+ MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC); count++) {
host_diagnostic = readl(&ioc->chip->HostDiagnostic);
@@ -4103,11 +4107,13 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER))
break;
- /* wait 1 msec */
+ /* Wait to pass the second read delay window */
if (sleep_flag == CAN_SLEEP)
- usleep_range(1000, 1500);
+ msleep(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC
+ / 1000);
else
- mdelay(1);
+ mdelay(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC
+ / 1000);
}
if (host_diagnostic & MPI2_DIAG_HCB_MODE) {
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 994656cbfac9..0ebf5d913c80 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -3,7 +3,7 @@
* for access to MPT (Message Passing Technology) firmware.
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_base.h
- * Copyright (C) 2012 LSI Corporation
+ * Copyright (C) 2012-2013 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
@@ -70,10 +70,10 @@
#define MPT3SAS_DRIVER_NAME "mpt3sas"
#define MPT3SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>"
#define MPT3SAS_DESCRIPTION "LSI MPT Fusion SAS 3.0 Device Driver"
-#define MPT3SAS_DRIVER_VERSION "01.100.01.00"
-#define MPT3SAS_MAJOR_VERSION 1
+#define MPT3SAS_DRIVER_VERSION "02.100.00.00"
+#define MPT3SAS_MAJOR_VERSION 2
#define MPT3SAS_MINOR_VERSION 100
-#define MPT3SAS_BUILD_VERSION 1
+#define MPT3SAS_BUILD_VERSION 0
#define MPT3SAS_RELEASE_VERSION 00
/*
diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c
index 4db0c7a18bd8..936ec0391990 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_config.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_config.c
@@ -2,7 +2,7 @@
* This module provides common API for accessing firmware configuration pages
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c
- * Copyright (C) 2012 LSI Corporation
+ * Copyright (C) 2012-2013 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
index 0b402b6f2d26..9b89de14a0a3 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -3,7 +3,7 @@
* controllers
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_ctl.c
- * Copyright (C) 2012 LSI Corporation
+ * Copyright (C) 2012-2013 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.h b/drivers/scsi/mpt3sas/mpt3sas_ctl.h
index bd89f4f00550..53b0c480d98f 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.h
@@ -3,7 +3,7 @@
* controllers
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_ctl.h
- * Copyright (C) 2012 LSI Corporation
+ * Copyright (C) 2012-2013 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
diff --git a/drivers/scsi/mpt3sas/mpt3sas_debug.h b/drivers/scsi/mpt3sas/mpt3sas_debug.h
index 35405e7044f8..545b22d2cbdf 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_debug.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_debug.h
@@ -2,7 +2,7 @@
* Logging Support for MPT (Message Passing Technology) based controllers
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_debug.c
- * Copyright (C) 2012 LSI Corporation
+ * Copyright (C) 2012-2013 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index dcbf7c880cb2..8cbe8fd21fc4 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -2,7 +2,7 @@
* Scsi Host Layer for MPT (Message Passing Technology) based controllers
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_scsih.c
- * Copyright (C) 2012 LSI Corporation
+ * Copyright (C) 2012-2013 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
@@ -675,11 +675,12 @@ _scsih_sas_device_add(struct MPT3SAS_ADAPTER *ioc,
* devices while scanning is turned on due to an oops in
* scsi_sysfs_add_sdev()->add_device()->sysfs_addrm_start()
*/
- if (!ioc->is_driver_loading)
+ if (!ioc->is_driver_loading) {
mpt3sas_transport_port_remove(ioc,
sas_device->sas_address,
sas_device->sas_address_parent);
- _scsih_sas_device_remove(ioc, sas_device);
+ _scsih_sas_device_remove(ioc, sas_device);
+ }
}
}
@@ -1273,6 +1274,7 @@ _scsih_slave_alloc(struct scsi_device *sdev)
struct MPT3SAS_DEVICE *sas_device_priv_data;
struct scsi_target *starget;
struct _raid_device *raid_device;
+ struct _sas_device *sas_device;
unsigned long flags;
sas_device_priv_data = kzalloc(sizeof(struct scsi_device), GFP_KERNEL);
@@ -1301,6 +1303,19 @@ _scsih_slave_alloc(struct scsi_device *sdev)
spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
}
+ if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+ sas_target_priv_data->sas_address);
+ if (sas_device && (sas_device->starget == NULL)) {
+ sdev_printk(KERN_INFO, sdev,
+ "%s : sas_device->starget set to starget @ %d\n",
+ __func__, __LINE__);
+ sas_device->starget = starget;
+ }
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ }
+
return 0;
}
@@ -6392,7 +6407,7 @@ _scsih_search_responding_sas_devices(struct MPT3SAS_ADAPTER *ioc)
handle))) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
break;
handle = le16_to_cpu(sas_device_pg0.DevHandle);
device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
@@ -6494,7 +6509,7 @@ _scsih_search_responding_raid_devices(struct MPT3SAS_ADAPTER *ioc)
&volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
break;
handle = le16_to_cpu(volume_pg1.DevHandle);
@@ -6518,7 +6533,7 @@ _scsih_search_responding_raid_devices(struct MPT3SAS_ADAPTER *ioc)
phys_disk_num))) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
break;
phys_disk_num = pd_pg0.PhysDiskNum;
handle = le16_to_cpu(pd_pg0.DevHandle);
@@ -6597,7 +6612,7 @@ _scsih_search_responding_expanders(struct MPT3SAS_ADAPTER *ioc)
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
break;
handle = le16_to_cpu(expander_pg0.DevHandle);
@@ -6742,8 +6757,6 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc)
MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
- break;
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
pr_info(MPT3SAS_FMT "\tbreak from expander scan: " \
"ioc_status(0x%04x), loginfo(0x%08x)\n",
@@ -6787,8 +6800,6 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc)
phys_disk_num))) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
- break;
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
pr_info(MPT3SAS_FMT "\tbreak from phys disk scan: "\
"ioc_status(0x%04x), loginfo(0x%08x)\n",
@@ -6854,8 +6865,6 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc)
&volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
- break;
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
pr_info(MPT3SAS_FMT "\tbreak from volume scan: " \
"ioc_status(0x%04x), loginfo(0x%08x)\n",
@@ -6914,8 +6923,6 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc)
handle))) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
- break;
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
pr_info(MPT3SAS_FMT "\tbreak from end device scan:"\
" ioc_status(0x%04x), loginfo(0x%08x)\n",
@@ -7525,10 +7532,12 @@ _scsih_probe_boot_devices(struct MPT3SAS_ADAPTER *ioc)
sas_address_parent)) {
_scsih_sas_device_remove(ioc, sas_device);
} else if (!sas_device->starget) {
- if (!ioc->is_driver_loading)
- mpt3sas_transport_port_remove(ioc, sas_address,
+ if (!ioc->is_driver_loading) {
+ mpt3sas_transport_port_remove(ioc,
+ sas_address,
sas_address_parent);
- _scsih_sas_device_remove(ioc, sas_device);
+ _scsih_sas_device_remove(ioc, sas_device);
+ }
}
}
}
@@ -7584,13 +7593,14 @@ _scsih_probe_sas(struct MPT3SAS_ADAPTER *ioc)
* oops in scsi_sysfs_add_sdev()->add_device()->
* sysfs_addrm_start()
*/
- if (!ioc->is_driver_loading)
+ if (!ioc->is_driver_loading) {
mpt3sas_transport_port_remove(ioc,
sas_device->sas_address,
sas_device->sas_address_parent);
- list_del(&sas_device->list);
- kfree(sas_device);
- continue;
+ list_del(&sas_device->list);
+ kfree(sas_device);
+ continue;
+ }
}
spin_lock_irqsave(&ioc->sas_device_lock, flags);
diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c
index 87ca2b7287c3..dcadd56860ff 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_transport.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c
@@ -2,7 +2,7 @@
* SAS Transport Layer for MPT (Message Passing Technology) based controllers
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_transport.c
- * Copyright (C) 2012 LSI Corporation
+ * Copyright (C) 2012-2013 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
diff --git a/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
index 6f8d6213040b..f6533ab20364 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
@@ -3,7 +3,7 @@
* (Message Passing Technology) based controllers
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
- * Copyright (C) 2012 LSI Corporation
+ * Copyright (C) 2012-2013 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
diff --git a/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h
index a10c30907394..bb693923bef1 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h
@@ -4,7 +4,7 @@
* controllers
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_base.h
- * Copyright (C) 2012 LSI Corporation
+ * Copyright (C) 2012-2013 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 17:05:29 +0000