diff options
Diffstat (limited to 'drivers/scsi/mpt3sas/mpt3sas_ctl.c')
-rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_ctl.c | 178 |
1 files changed, 166 insertions, 12 deletions
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c index d4ecfbbe738c..7d696952b376 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c @@ -596,8 +596,16 @@ _ctl_set_task_mid(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command *karg, if (priv_data->sas_target->handle != handle) continue; st = scsi_cmd_priv(scmd); - tm_request->TaskMID = cpu_to_le16(st->smid); - found = 1; + + /* + * If the given TaskMID from the user space is zero, then the + * first outstanding smid will be picked up. Otherwise, + * targeted smid will be the one. + */ + if (!tm_request->TaskMID || tm_request->TaskMID == st->smid) { + tm_request->TaskMID = cpu_to_le16(st->smid); + found = 1; + } } if (!found) { @@ -654,7 +662,6 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg, size_t data_in_sz = 0; long ret; u16 device_handle = MPT3SAS_INVALID_DEVICE_HANDLE; - u8 tr_method = MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE; issue_reset = 0; @@ -707,6 +714,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg, ioc->ctl_cmds.status = MPT3_CMD_PENDING; memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz); request = mpt3sas_base_get_msg_frame(ioc, smid); + memset(request, 0, ioc->request_sz); memcpy(request, mpi_request, karg.data_sge_offset*4); ioc->ctl_cmds.smid = smid; data_out_sz = karg.data_out_size; @@ -921,13 +929,37 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg, Mpi2ToolboxCleanRequest_t *toolbox_request = (Mpi2ToolboxCleanRequest_t *)mpi_request; - if (toolbox_request->Tool == MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL) { + if ((toolbox_request->Tool == MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL) + || (toolbox_request->Tool == + MPI26_TOOLBOX_BACKEND_PCIE_LANE_MARGIN)) ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma, data_in_sz); - } else { + else if (toolbox_request->Tool == + MPI2_TOOLBOX_MEMORY_MOVE_TOOL) { + Mpi2ToolboxMemMoveRequest_t *mem_move_request = + (Mpi2ToolboxMemMoveRequest_t *)request; + Mpi2SGESimple64_t tmp, *src = NULL, *dst = NULL; + + ioc->build_sg_mpi(ioc, psge, data_out_dma, + data_out_sz, data_in_dma, data_in_sz); + if (data_out_sz && !data_in_sz) { + dst = + (Mpi2SGESimple64_t *)&mem_move_request->SGL; + src = (void *)dst + ioc->sge_size; + + memcpy(&tmp, src, ioc->sge_size); + memcpy(src, dst, ioc->sge_size); + memcpy(dst, &tmp, ioc->sge_size); + } + if (ioc->logging_level & MPT_DEBUG_TM) { + ioc_info(ioc, + "Mpi2ToolboxMemMoveRequest_t request msg\n"); + _debug_dump_mf(mem_move_request, + ioc->request_sz/4); + } + } else ioc->build_sg_mpi(ioc, psge, data_out_dma, data_out_sz, - data_in_dma, data_in_sz); - } + data_in_dma, data_in_sz); ioc->put_smid_default(ioc, smid); break; } @@ -1047,12 +1079,14 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg, mpt3sas_halt_firmware(ioc); pcie_device = mpt3sas_get_pdev_by_handle(ioc, le16_to_cpu(mpi_request->FunctionDependent1)); - if (pcie_device && (!ioc->tm_custom_handling)) + if (pcie_device && (!ioc->tm_custom_handling) && + (!(mpt3sas_scsih_is_pcie_scsi_device( + pcie_device->device_info)))) mpt3sas_scsih_issue_locked_tm(ioc, le16_to_cpu(mpi_request->FunctionDependent1), 0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 0, pcie_device->reset_timeout, - tr_method); + MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE); else mpt3sas_scsih_issue_locked_tm(ioc, le16_to_cpu(mpi_request->FunctionDependent1), @@ -3278,9 +3312,8 @@ diag_trigger_scsi_store(struct device *cdev, ssize_t sz; spin_lock_irqsave(&ioc->diag_trigger_lock, flags); - sz = min(sizeof(struct SL_WH_SCSI_TRIGGERS_T), count); - memset(&ioc->diag_trigger_scsi, 0, - sizeof(struct SL_WH_EVENT_TRIGGERS_T)); + sz = min(sizeof(ioc->diag_trigger_scsi), count); + memset(&ioc->diag_trigger_scsi, 0, sizeof(ioc->diag_trigger_scsi)); memcpy(&ioc->diag_trigger_scsi, buf, sz); if (ioc->diag_trigger_scsi.ValidEntries > NUM_VALID_ENTRIES) ioc->diag_trigger_scsi.ValidEntries = NUM_VALID_ENTRIES; @@ -3349,6 +3382,125 @@ static DEVICE_ATTR_RW(diag_trigger_mpi); /*****************************************/ +/** + * drv_support_bitmap_show - driver supported feature bitmap + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +drv_support_bitmap_show(struct device *cdev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "0x%08x\n", ioc->drv_support_bitmap); +} +static DEVICE_ATTR_RO(drv_support_bitmap); + +/** + * enable_sdev_max_qd_show - display whether sdev max qd is enabled/disabled + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs read/write shost attribute. This attribute is used to set the + * targets queue depth to HBA IO queue depth if this attribute is enabled. + */ +static ssize_t +enable_sdev_max_qd_show(struct device *cdev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%d\n", ioc->enable_sdev_max_qd); +} + +/** + * enable_sdev_max_qd_store - Enable/disable sdev max qd + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs read/write shost attribute. This attribute is used to set the + * targets queue depth to HBA IO queue depth if this attribute is enabled. + * If this attribute is disabled then targets will have corresponding default + * queue depth. + */ +static ssize_t +enable_sdev_max_qd_store(struct device *cdev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + struct MPT3SAS_DEVICE *sas_device_priv_data; + struct MPT3SAS_TARGET *sas_target_priv_data; + int val = 0; + struct scsi_device *sdev; + struct _raid_device *raid_device; + int qdepth; + + if (kstrtoint(buf, 0, &val) != 0) + return -EINVAL; + + switch (val) { + case 0: + ioc->enable_sdev_max_qd = 0; + shost_for_each_device(sdev, ioc->shost) { + sas_device_priv_data = sdev->hostdata; + if (!sas_device_priv_data) + continue; + sas_target_priv_data = sas_device_priv_data->sas_target; + if (!sas_target_priv_data) + continue; + + if (sas_target_priv_data->flags & + MPT_TARGET_FLAGS_VOLUME) { + raid_device = + mpt3sas_raid_device_find_by_handle(ioc, + sas_target_priv_data->handle); + + switch (raid_device->volume_type) { + case MPI2_RAID_VOL_TYPE_RAID0: + if (raid_device->device_info & + MPI2_SAS_DEVICE_INFO_SSP_TARGET) + qdepth = + MPT3SAS_SAS_QUEUE_DEPTH; + else + qdepth = + MPT3SAS_SATA_QUEUE_DEPTH; + break; + case MPI2_RAID_VOL_TYPE_RAID1E: + case MPI2_RAID_VOL_TYPE_RAID1: + case MPI2_RAID_VOL_TYPE_RAID10: + case MPI2_RAID_VOL_TYPE_UNKNOWN: + default: + qdepth = MPT3SAS_RAID_QUEUE_DEPTH; + } + } else if (sas_target_priv_data->flags & + MPT_TARGET_FLAGS_PCIE_DEVICE) + qdepth = MPT3SAS_NVME_QUEUE_DEPTH; + else + qdepth = MPT3SAS_SAS_QUEUE_DEPTH; + + mpt3sas_scsih_change_queue_depth(sdev, qdepth); + } + break; + case 1: + ioc->enable_sdev_max_qd = 1; + shost_for_each_device(sdev, ioc->shost) + mpt3sas_scsih_change_queue_depth(sdev, + shost->can_queue); + break; + default: + return -EINVAL; + } + + return strlen(buf); +} +static DEVICE_ATTR_RW(enable_sdev_max_qd); + struct device_attribute *mpt3sas_host_attrs[] = { &dev_attr_version_fw, &dev_attr_version_bios, @@ -3374,7 +3526,9 @@ struct device_attribute *mpt3sas_host_attrs[] = { &dev_attr_diag_trigger_event, &dev_attr_diag_trigger_scsi, &dev_attr_diag_trigger_mpi, + &dev_attr_drv_support_bitmap, &dev_attr_BRM_status, + &dev_attr_enable_sdev_max_qd, NULL, }; |