diff options
Diffstat (limited to 'drivers/scsi/mpt2sas/mpi/mpi2_sas.h')
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_sas.h | 288 |
1 files changed, 0 insertions, 288 deletions
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_sas.h b/drivers/scsi/mpt2sas/mpi/mpi2_sas.h deleted file mode 100644 index 45b6fa10b803..000000000000 --- a/drivers/scsi/mpt2sas/mpi/mpi2_sas.h +++ /dev/null @@ -1,288 +0,0 @@ -/* - * Copyright (c) 2000-2014 LSI Corporation. - * - * - * Name: mpi2_sas.h - * Title: MPI Serial Attached SCSI structures and definitions - * Creation Date: February 9, 2007 - * - * mpi2_sas.h Version: 02.00.05 - * - * Version History - * --------------- - * - * Date Version Description - * -------- -------- ------------------------------------------------------ - * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. - * 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit - * Control Request. - * 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control - * Request. - * 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST - * to MPI2_SGE_IO_UNION since it supports chained SGLs. - * 05-12-10 02.00.04 Modified some comments. - * 08-11-10 02.00.05 Added NCQ operations to SAS IO Unit Control. - * -------------------------------------------------------------------------- - */ - -#ifndef MPI2_SAS_H -#define MPI2_SAS_H - -/* - * Values for SASStatus. - */ -#define MPI2_SASSTATUS_SUCCESS (0x00) -#define MPI2_SASSTATUS_UNKNOWN_ERROR (0x01) -#define MPI2_SASSTATUS_INVALID_FRAME (0x02) -#define MPI2_SASSTATUS_UTC_BAD_DEST (0x03) -#define MPI2_SASSTATUS_UTC_BREAK_RECEIVED (0x04) -#define MPI2_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05) -#define MPI2_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06) -#define MPI2_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07) -#define MPI2_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08) -#define MPI2_SASSTATUS_UTC_WRONG_DESTINATION (0x09) -#define MPI2_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A) -#define MPI2_SASSTATUS_LONG_INFORMATION_UNIT (0x0B) -#define MPI2_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C) -#define MPI2_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D) -#define MPI2_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E) -#define MPI2_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F) -#define MPI2_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10) -#define MPI2_SASSTATUS_DATA_OFFSET_ERROR (0x11) -#define MPI2_SASSTATUS_SDSF_NAK_RECEIVED (0x12) -#define MPI2_SASSTATUS_SDSF_CONNECTION_FAILED (0x13) -#define MPI2_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14) - - -/* - * Values for the SAS DeviceInfo field used in SAS Device Status Change Event - * data and SAS Configuration pages. - */ -#define MPI2_SAS_DEVICE_INFO_SEP (0x00004000) -#define MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000) -#define MPI2_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000) -#define MPI2_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800) -#define MPI2_SAS_DEVICE_INFO_SSP_TARGET (0x00000400) -#define MPI2_SAS_DEVICE_INFO_STP_TARGET (0x00000200) -#define MPI2_SAS_DEVICE_INFO_SMP_TARGET (0x00000100) -#define MPI2_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080) -#define MPI2_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040) -#define MPI2_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020) -#define MPI2_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010) -#define MPI2_SAS_DEVICE_INFO_SATA_HOST (0x00000008) - -#define MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007) -#define MPI2_SAS_DEVICE_INFO_NO_DEVICE (0x00000000) -#define MPI2_SAS_DEVICE_INFO_END_DEVICE (0x00000001) -#define MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002) -#define MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003) - - -/***************************************************************************** -* -* SAS Messages -* -*****************************************************************************/ - -/**************************************************************************** -* SMP Passthrough messages -****************************************************************************/ - -/* SMP Passthrough Request Message */ -typedef struct _MPI2_SMP_PASSTHROUGH_REQUEST -{ - U8 PassthroughFlags; /* 0x00 */ - U8 PhysicalPort; /* 0x01 */ - U8 ChainOffset; /* 0x02 */ - U8 Function; /* 0x03 */ - U16 RequestDataLength; /* 0x04 */ - U8 SGLFlags; /* 0x06 */ - U8 MsgFlags; /* 0x07 */ - U8 VP_ID; /* 0x08 */ - U8 VF_ID; /* 0x09 */ - U16 Reserved1; /* 0x0A */ - U32 Reserved2; /* 0x0C */ - U64 SASAddress; /* 0x10 */ - U32 Reserved3; /* 0x18 */ - U32 Reserved4; /* 0x1C */ - MPI2_SIMPLE_SGE_UNION SGL; /* 0x20 */ -} MPI2_SMP_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SMP_PASSTHROUGH_REQUEST, - Mpi2SmpPassthroughRequest_t, MPI2_POINTER pMpi2SmpPassthroughRequest_t; - -/* values for PassthroughFlags field */ -#define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80) - -/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ - - -/* SMP Passthrough Reply Message */ -typedef struct _MPI2_SMP_PASSTHROUGH_REPLY -{ - U8 PassthroughFlags; /* 0x00 */ - U8 PhysicalPort; /* 0x01 */ - U8 MsgLength; /* 0x02 */ - U8 Function; /* 0x03 */ - U16 ResponseDataLength; /* 0x04 */ - U8 SGLFlags; /* 0x06 */ - U8 MsgFlags; /* 0x07 */ - U8 VP_ID; /* 0x08 */ - U8 VF_ID; /* 0x09 */ - U16 Reserved1; /* 0x0A */ - U8 Reserved2; /* 0x0C */ - U8 SASStatus; /* 0x0D */ - U16 IOCStatus; /* 0x0E */ - U32 IOCLogInfo; /* 0x10 */ - U32 Reserved3; /* 0x14 */ - U8 ResponseData[4]; /* 0x18 */ -} MPI2_SMP_PASSTHROUGH_REPLY, MPI2_POINTER PTR_MPI2_SMP_PASSTHROUGH_REPLY, - Mpi2SmpPassthroughReply_t, MPI2_POINTER pMpi2SmpPassthroughReply_t; - -/* values for PassthroughFlags field */ -#define MPI2_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80) - -/* values for SASStatus field are at the top of this file */ - - -/**************************************************************************** -* SATA Passthrough messages -****************************************************************************/ - -/* SATA Passthrough Request Message */ -typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST -{ - U16 DevHandle; /* 0x00 */ - U8 ChainOffset; /* 0x02 */ - U8 Function; /* 0x03 */ - U16 PassthroughFlags; /* 0x04 */ - U8 SGLFlags; /* 0x06 */ - U8 MsgFlags; /* 0x07 */ - U8 VP_ID; /* 0x08 */ - U8 VF_ID; /* 0x09 */ - U16 Reserved1; /* 0x0A */ - U32 Reserved2; /* 0x0C */ - U32 Reserved3; /* 0x10 */ - U32 Reserved4; /* 0x14 */ - U32 DataLength; /* 0x18 */ - U8 CommandFIS[20]; /* 0x1C */ - MPI2_SGE_IO_UNION SGL; /* 0x30 */ -} MPI2_SATA_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REQUEST, - Mpi2SataPassthroughRequest_t, MPI2_POINTER pMpi2SataPassthroughRequest_t; - -/* values for PassthroughFlags field */ -#define MPI2_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100) -#define MPI2_SATA_PT_REQ_PT_FLAGS_DMA (0x0020) -#define MPI2_SATA_PT_REQ_PT_FLAGS_PIO (0x0010) -#define MPI2_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004) -#define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002) -#define MPI2_SATA_PT_REQ_PT_FLAGS_READ (0x0001) - -/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ - - -/* SATA Passthrough Reply Message */ -typedef struct _MPI2_SATA_PASSTHROUGH_REPLY -{ - U16 DevHandle; /* 0x00 */ - U8 MsgLength; /* 0x02 */ - U8 Function; /* 0x03 */ - U16 PassthroughFlags; /* 0x04 */ - U8 SGLFlags; /* 0x06 */ - U8 MsgFlags; /* 0x07 */ - U8 VP_ID; /* 0x08 */ - U8 VF_ID; /* 0x09 */ - U16 Reserved1; /* 0x0A */ - U8 Reserved2; /* 0x0C */ - U8 SASStatus; /* 0x0D */ - U16 IOCStatus; /* 0x0E */ - U32 IOCLogInfo; /* 0x10 */ - U8 StatusFIS[20]; /* 0x14 */ - U32 StatusControlRegisters; /* 0x28 */ - U32 TransferCount; /* 0x2C */ -} MPI2_SATA_PASSTHROUGH_REPLY, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REPLY, - Mpi2SataPassthroughReply_t, MPI2_POINTER pMpi2SataPassthroughReply_t; - -/* values for SASStatus field are at the top of this file */ - - -/**************************************************************************** -* SAS IO Unit Control messages -****************************************************************************/ - -/* SAS IO Unit Control Request Message */ -typedef struct _MPI2_SAS_IOUNIT_CONTROL_REQUEST -{ - U8 Operation; /* 0x00 */ - U8 Reserved1; /* 0x01 */ - U8 ChainOffset; /* 0x02 */ - U8 Function; /* 0x03 */ - U16 DevHandle; /* 0x04 */ - U8 IOCParameter; /* 0x06 */ - U8 MsgFlags; /* 0x07 */ - U8 VP_ID; /* 0x08 */ - U8 VF_ID; /* 0x09 */ - U16 Reserved3; /* 0x0A */ - U16 Reserved4; /* 0x0C */ - U8 PhyNum; /* 0x0E */ - U8 PrimFlags; /* 0x0F */ - U32 Primitive; /* 0x10 */ - U8 LookupMethod; /* 0x14 */ - U8 Reserved5; /* 0x15 */ - U16 SlotNumber; /* 0x16 */ - U64 LookupAddress; /* 0x18 */ - U32 IOCParameterValue; /* 0x20 */ - U32 Reserved7; /* 0x24 */ - U32 Reserved8; /* 0x28 */ -} MPI2_SAS_IOUNIT_CONTROL_REQUEST, - MPI2_POINTER PTR_MPI2_SAS_IOUNIT_CONTROL_REQUEST, - Mpi2SasIoUnitControlRequest_t, MPI2_POINTER pMpi2SasIoUnitControlRequest_t; - -/* values for the Operation field */ -#define MPI2_SAS_OP_CLEAR_ALL_PERSISTENT (0x02) -#define MPI2_SAS_OP_PHY_LINK_RESET (0x06) -#define MPI2_SAS_OP_PHY_HARD_RESET (0x07) -#define MPI2_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08) -#define MPI2_SAS_OP_SEND_PRIMITIVE (0x0A) -#define MPI2_SAS_OP_FORCE_FULL_DISCOVERY (0x0B) -#define MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C) -#define MPI2_SAS_OP_REMOVE_DEVICE (0x0D) -#define MPI2_SAS_OP_LOOKUP_MAPPING (0x0E) -#define MPI2_SAS_OP_SET_IOC_PARAMETER (0x0F) -#define MPI2_SAS_OP_DEV_ENABLE_NCQ (0x14) -#define MPI2_SAS_OP_DEV_DISABLE_NCQ (0x15) -#define MPI2_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80) - -/* values for the PrimFlags field */ -#define MPI2_SAS_PRIMFLAGS_SINGLE (0x08) -#define MPI2_SAS_PRIMFLAGS_TRIPLE (0x02) -#define MPI2_SAS_PRIMFLAGS_REDUNDANT (0x01) - -/* values for the LookupMethod field */ -#define MPI2_SAS_LOOKUP_METHOD_SAS_ADDRESS (0x01) -#define MPI2_SAS_LOOKUP_METHOD_SAS_ENCLOSURE_SLOT (0x02) -#define MPI2_SAS_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03) - - -/* SAS IO Unit Control Reply Message */ -typedef struct _MPI2_SAS_IOUNIT_CONTROL_REPLY -{ - U8 Operation; /* 0x00 */ - U8 Reserved1; /* 0x01 */ - U8 MsgLength; /* 0x02 */ - U8 Function; /* 0x03 */ - U16 DevHandle; /* 0x04 */ - U8 IOCParameter; /* 0x06 */ - U8 MsgFlags; /* 0x07 */ - U8 VP_ID; /* 0x08 */ - U8 VF_ID; /* 0x09 */ - U16 Reserved3; /* 0x0A */ - U16 Reserved4; /* 0x0C */ - U16 IOCStatus; /* 0x0E */ - U32 IOCLogInfo; /* 0x10 */ -} MPI2_SAS_IOUNIT_CONTROL_REPLY, - MPI2_POINTER PTR_MPI2_SAS_IOUNIT_CONTROL_REPLY, - Mpi2SasIoUnitControlReply_t, MPI2_POINTER pMpi2SasIoUnitControlReply_t; - - -#endif - - |