summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/lpfc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/lpfc')
-rw-r--r--drivers/scsi/lpfc/lpfc_els.c11
-rw-r--r--drivers/scsi/lpfc/lpfc_hbadisc.c2
-rw-r--r--drivers/scsi/lpfc/lpfc_scsi.c11
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.c13
4 files changed, 21 insertions, 16 deletions
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 023da0e00d38..727c793422f2 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -4082,9 +4082,6 @@ lpfc_els_rsp_rnid_acc(struct lpfc_vport *vport, uint8_t format,
phba->fc_stat.elsXmitACC++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
- lpfc_nlp_put(ndlp);
- elsiocb->context1 = NULL; /* Don't need ndlp for cmpl,
- * it could be freed */
rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
@@ -4166,6 +4163,11 @@ lpfc_els_rsp_echo_acc(struct lpfc_vport *vport, uint8_t *data,
psli = &phba->sli;
cmdsize = oldiocb->iocb.unsli3.rcvsli3.acc_len;
+ /* The accumulated length can exceed the BPL_SIZE. For
+ * now, use this as the limit
+ */
+ if (cmdsize > LPFC_BPL_SIZE)
+ cmdsize = LPFC_BPL_SIZE;
elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry, ndlp,
ndlp->nlp_DID, ELS_CMD_ACC);
if (!elsiocb)
@@ -4189,9 +4191,6 @@ lpfc_els_rsp_echo_acc(struct lpfc_vport *vport, uint8_t *data,
phba->fc_stat.elsXmitACC++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
- lpfc_nlp_put(ndlp);
- elsiocb->context1 = NULL; /* Don't need ndlp for cmpl,
- * it could be freed */
rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 0b47adf9fee8..7eb34a6e8346 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1412,7 +1412,7 @@ lpfc_register_fcf(struct lpfc_hba *phba)
if (phba->pport->port_state != LPFC_FLOGI) {
phba->hba_flag |= FCF_RR_INPROG;
spin_unlock_irq(&phba->hbalock);
- lpfc_issue_init_vfi(phba->pport);
+ lpfc_initial_flogi(phba->pport);
return;
}
spin_unlock_irq(&phba->hbalock);
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index eadd241eeff1..75a48e38c1fe 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -3056,8 +3056,9 @@ lpfc_queuecommand_lck(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
}
ndlp = rdata->pnode;
- if (!(phba->sli3_options & LPFC_SLI3_BG_ENABLED) &&
- scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) {
+ if ((scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) &&
+ (!(phba->sli3_options & LPFC_SLI3_BG_ENABLED) ||
+ (phba->sli_rev == LPFC_SLI_REV4))) {
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
"9058 BLKGRD: ERROR: rcvd protected cmd:%02x"
@@ -3691,9 +3692,9 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
fc_host_post_vendor_event(shost, fc_get_event_number(),
sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);
- ret = fc_block_scsi_eh(cmnd);
- if (ret)
- return ret;
+ status = fc_block_scsi_eh(cmnd);
+ if (status)
+ return status;
/*
* Since the driver manages a single bus device, reset all
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 8b799f047a99..abed73d4414a 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -5818,9 +5818,13 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
* then turn off the global config parameters to disable the
* feature in the driver. This is not a fatal error.
*/
- if ((phba->cfg_enable_bg) &&
- !(bf_get(lpfc_mbx_rq_ftr_rsp_dif, &mqe->un.req_ftrs)))
- ftr_rsp++;
+ phba->sli3_options &= ~LPFC_SLI3_BG_ENABLED;
+ if (phba->cfg_enable_bg) {
+ if (bf_get(lpfc_mbx_rq_ftr_rsp_dif, &mqe->un.req_ftrs))
+ phba->sli3_options |= LPFC_SLI3_BG_ENABLED;
+ else
+ ftr_rsp++;
+ }
if (phba->max_vpi && phba->cfg_enable_npiv &&
!(bf_get(lpfc_mbx_rq_ftr_rsp_npiv, &mqe->un.req_ftrs)))
@@ -13296,7 +13300,8 @@ lpfc_fc_frame_to_vport(struct lpfc_hba *phba, struct fc_frame_header *fc_hdr,
uint32_t did = (fc_hdr->fh_d_id[0] << 16 |
fc_hdr->fh_d_id[1] << 8 |
fc_hdr->fh_d_id[2]);
-
+ if (did == Fabric_DID)
+ return phba->pport;
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {