diff options
Diffstat (limited to 'drivers/scsi/libsas/sas_expander.c')
| -rw-r--r-- | drivers/scsi/libsas/sas_expander.c | 1855 |
1 files changed, 1855 insertions, 0 deletions
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c new file mode 100644 index 000000000000..30b8014bcc7a --- /dev/null +++ b/drivers/scsi/libsas/sas_expander.c @@ -0,0 +1,1855 @@ +/* + * Serial Attached SCSI (SAS) Expander discovery and configuration + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include <linux/pci.h> +#include <linux/scatterlist.h> + +#include "sas_internal.h" + +#include <scsi/scsi_transport.h> +#include <scsi/scsi_transport_sas.h> +#include "../scsi_sas_internal.h" + +static int sas_discover_expander(struct domain_device *dev); +static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr); +static int sas_configure_phy(struct domain_device *dev, int phy_id, + u8 *sas_addr, int include); +static int sas_disable_routing(struct domain_device *dev, u8 *sas_addr); + +#if 0 +/* FIXME: smp needs to migrate into the sas class */ +static ssize_t smp_portal_read(struct kobject *, char *, loff_t, size_t); +static ssize_t smp_portal_write(struct kobject *, char *, loff_t, size_t); +#endif + +/* ---------- SMP task management ---------- */ + +static void smp_task_timedout(unsigned long _task) +{ + struct sas_task *task = (void *) _task; + unsigned long flags; + + spin_lock_irqsave(&task->task_state_lock, flags); + if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) + task->task_state_flags |= SAS_TASK_STATE_ABORTED; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + complete(&task->completion); +} + +static void smp_task_done(struct sas_task *task) +{ + if (!del_timer(&task->timer)) + return; + complete(&task->completion); +} + +/* Give it some long enough timeout. In seconds. */ +#define SMP_TIMEOUT 10 + +static int smp_execute_task(struct domain_device *dev, void *req, int req_size, + void *resp, int resp_size) +{ + int res; + struct sas_task *task = sas_alloc_task(GFP_KERNEL); + struct sas_internal *i = + to_sas_internal(dev->port->ha->core.shost->transportt); + + if (!task) + return -ENOMEM; + + task->dev = dev; + task->task_proto = dev->tproto; + sg_init_one(&task->smp_task.smp_req, req, req_size); + sg_init_one(&task->smp_task.smp_resp, resp, resp_size); + + task->task_done = smp_task_done; + + task->timer.data = (unsigned long) task; + task->timer.function = smp_task_timedout; + task->timer.expires = jiffies + SMP_TIMEOUT*HZ; + add_timer(&task->timer); + + res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL); + + if (res) { + del_timer(&task->timer); + SAS_DPRINTK("executing SMP task failed:%d\n", res); + goto ex_err; + } + + wait_for_completion(&task->completion); + res = -ETASK; + if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) { + SAS_DPRINTK("smp task timed out or aborted\n"); + i->dft->lldd_abort_task(task); + if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { + SAS_DPRINTK("SMP task aborted and not done\n"); + goto ex_err; + } + } + if (task->task_status.resp == SAS_TASK_COMPLETE && + task->task_status.stat == SAM_GOOD) + res = 0; + else + SAS_DPRINTK("%s: task to dev %016llx response: 0x%x " + "status 0x%x\n", __FUNCTION__, + SAS_ADDR(dev->sas_addr), + task->task_status.resp, + task->task_status.stat); +ex_err: + sas_free_task(task); + return res; +} + +/* ---------- Allocations ---------- */ + +static inline void *alloc_smp_req(int size) +{ + u8 *p = kzalloc(size, GFP_KERNEL); + if (p) + p[0] = SMP_REQUEST; + return p; +} + +static inline void *alloc_smp_resp(int size) +{ + return kzalloc(size, GFP_KERNEL); +} + +/* ---------- Expander configuration ---------- */ + +static void sas_set_ex_phy(struct domain_device *dev, int phy_id, + void *disc_resp) +{ + struct expander_device *ex = &dev->ex_dev; + struct ex_phy *phy = &ex->ex_phy[phy_id]; + struct smp_resp *resp = disc_resp; + struct discover_resp *dr = &resp->disc; + struct sas_rphy *rphy = dev->rphy; + int rediscover = (phy->phy != NULL); + + if (!rediscover) { + phy->phy = sas_phy_alloc(&rphy->dev, phy_id); + + /* FIXME: error_handling */ + BUG_ON(!phy->phy); + } + + switch (resp->result) { + case SMP_RESP_PHY_VACANT: + phy->phy_state = PHY_VACANT; + return; + default: + phy->phy_state = PHY_NOT_PRESENT; + return; + case SMP_RESP_FUNC_ACC: + phy->phy_state = PHY_EMPTY; /* do not know yet */ + break; + } + + phy->phy_id = phy_id; + phy->attached_dev_type = dr->attached_dev_type; + phy->linkrate = dr->linkrate; + phy->attached_sata_host = dr->attached_sata_host; + phy->attached_sata_dev = dr->attached_sata_dev; + phy->attached_sata_ps = dr->attached_sata_ps; + phy->attached_iproto = dr->iproto << 1; + phy->attached_tproto = dr->tproto << 1; + memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE); + phy->attached_phy_id = dr->attached_phy_id; + phy->phy_change_count = dr->change_count; + phy->routing_attr = dr->routing_attr; + phy->virtual = dr->virtual; + phy->last_da_index = -1; + + phy->phy->identify.initiator_port_protocols = phy->attached_iproto; + phy->phy->identify.target_port_protocols = phy->attached_tproto; + phy->phy->identify.phy_identifier = phy_id; + phy->phy->minimum_linkrate_hw = dr->hmin_linkrate; + phy->phy->maximum_linkrate_hw = dr->hmax_linkrate; + phy->phy->minimum_linkrate = dr->pmin_linkrate; + phy->phy->maximum_linkrate = dr->pmax_linkrate; + phy->phy->negotiated_linkrate = phy->linkrate; + + if (!rediscover) + sas_phy_add(phy->phy); + + SAS_DPRINTK("ex %016llx phy%02d:%c attached: %016llx\n", + SAS_ADDR(dev->sas_addr), phy->phy_id, + phy->routing_attr == TABLE_ROUTING ? 'T' : + phy->routing_attr == DIRECT_ROUTING ? 'D' : + phy->routing_attr == SUBTRACTIVE_ROUTING ? 'S' : '?', + SAS_ADDR(phy->attached_sas_addr)); + + return; +} + +#define DISCOVER_REQ_SIZE 16 +#define DISCOVER_RESP_SIZE 56 + +static int sas_ex_phy_discover(struct domain_device *dev, int single) +{ + struct expander_device *ex = &dev->ex_dev; + int res = 0; + u8 *disc_req; + u8 *disc_resp; + + disc_req = alloc_smp_req(DISCOVER_REQ_SIZE); + if (!disc_req) + return -ENOMEM; + + disc_resp = alloc_smp_req(DISCOVER_RESP_SIZE); + if (!disc_resp) { + kfree(disc_req); + return -ENOMEM; + } + + disc_req[1] = SMP_DISCOVER; + + if (0 <= single && single < ex->num_phys) { + disc_req[9] = single; + res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE, + disc_resp, DISCOVER_RESP_SIZE); + if (res) + goto out_err; + sas_set_ex_phy(dev, single, disc_resp); + } else { + int i; + + for (i = 0; i < ex->num_phys; i++) { + disc_req[9] = i; + res = smp_execute_task(dev, disc_req, + DISCOVER_REQ_SIZE, disc_resp, + DISCOVER_RESP_SIZE); + if (res) + goto out_err; + sas_set_ex_phy(dev, i, disc_resp); + } + } +out_err: + kfree(disc_resp); + kfree(disc_req); + return res; +} + +static int sas_expander_discover(struct domain_device *dev) +{ + struct expander_device *ex = &dev->ex_dev; + int res = -ENOMEM; + + ex->ex_phy = kzalloc(sizeof(*ex->ex_phy)*ex->num_phys, GFP_KERNEL); + if (!ex->ex_phy) + return -ENOMEM; + + res = sas_ex_phy_discover(dev, -1); + if (res) + goto out_err; + + return 0; + out_err: + kfree(ex->ex_phy); + ex->ex_phy = NULL; + return res; +} + +#define MAX_EXPANDER_PHYS 128 + +static void ex_assign_report_general(struct domain_device *dev, + struct smp_resp *resp) +{ + struct report_general_resp *rg = &resp->rg; + + dev->ex_dev.ex_change_count = be16_to_cpu(rg->change_count); + dev->ex_dev.max_route_indexes = be16_to_cpu(rg->route_indexes); + dev->ex_dev.num_phys = min(rg->num_phys, (u8)MAX_EXPANDER_PHYS); + dev->ex_dev.conf_route_table = rg->conf_route_table; + dev->ex_dev.configuring = rg->configuring; + memcpy(dev->ex_dev.enclosure_logical_id, rg->enclosure_logical_id, 8); +} + +#define RG_REQ_SIZE 8 +#define RG_RESP_SIZE 32 + +static int sas_ex_general(struct domain_device *dev) +{ + u8 *rg_req; + struct smp_resp *rg_resp; + int res; + int i; + + rg_req = alloc_smp_req(RG_REQ_SIZE); + if (!rg_req) + return -ENOMEM; + + rg_resp = alloc_smp_resp(RG_RESP_SIZE); + if (!rg_resp) { + kfree(rg_req); + return -ENOMEM; + } + + rg_req[1] = SMP_REPORT_GENERAL; + + for (i = 0; i < 5; i++) { + res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp, + RG_RESP_SIZE); + + if (res) { + SAS_DPRINTK("RG to ex %016llx failed:0x%x\n", + SAS_ADDR(dev->sas_addr), res); + goto out; + } else if (rg_resp->result != SMP_RESP_FUNC_ACC) { + SAS_DPRINTK("RG:ex %016llx returned SMP result:0x%x\n", + SAS_ADDR(dev->sas_addr), rg_resp->result); + res = rg_resp->result; + goto out; + } + + ex_assign_report_general(dev, rg_resp); + + if (dev->ex_dev.configuring) { + SAS_DPRINTK("RG: ex %llx self-configuring...\n", + SAS_ADDR(dev->sas_addr)); + schedule_timeout_interruptible(5*HZ); + } else + break; + } +out: + kfree(rg_req); + kfree(rg_resp); + return res; +} + +static void ex_assign_manuf_info(struct domain_device *dev, void + *_mi_resp) +{ + u8 *mi_resp = _mi_resp; + struct sas_rphy *rphy = dev->rphy; + struct sas_expander_device *edev = rphy_to_expander_device(rphy); + + memcpy(edev->vendor_id, mi_resp + 12, SAS_EXPANDER_VENDOR_ID_LEN); + memcpy(edev->product_id, mi_resp + 20, SAS_EXPANDER_PRODUCT_ID_LEN); + memcpy(edev->product_rev, mi_resp + 36, + SAS_EXPANDER_PRODUCT_REV_LEN); + + if (mi_resp[8] & 1) { + memcpy(edev->component_vendor_id, mi_resp + 40, + SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN); + edev->component_id = mi_resp[48] << 8 | mi_resp[49]; + edev->component_revision_id = mi_resp[50]; + } +} + +#define MI_REQ_SIZE 8 +#define MI_RESP_SIZE 64 + +static int sas_ex_manuf_info(struct domain_device *dev) +{ + u8 *mi_req; + u8 *mi_resp; + int res; + + mi_req = alloc_smp_req(MI_REQ_SIZE); + if (!mi_req) + return -ENOMEM; + + mi_resp = alloc_smp_resp(MI_RESP_SIZE); + if (!mi_resp) { + kfree(mi_req); + return -ENOMEM; + } + + mi_req[1] = SMP_REPORT_MANUF_INFO; + + res = smp_execute_task(dev, mi_req, MI_REQ_SIZE, mi_resp,MI_RESP_SIZE); + if (res) { + SAS_DPRINTK("MI: ex %016llx failed:0x%x\n", + SAS_ADDR(dev->sas_addr), res); + goto out; + } else if (mi_resp[2] != SMP_RESP_FUNC_ACC) { + SAS_DPRINTK("MI ex %016llx returned SMP result:0x%x\n", + SAS_ADDR(dev->sas_addr), mi_resp[2]); + goto out; + } + + ex_assign_manuf_info(dev, mi_resp); +out: + kfree(mi_req); + kfree(mi_resp); + return res; +} + +#define PC_REQ_SIZE 44 +#define PC_RESP_SIZE 8 + +int sas_smp_phy_control(struct domain_device *dev, int phy_id, + enum phy_func phy_func, + struct sas_phy_linkrates *rates) +{ + u8 *pc_req; + u8 *pc_resp; + int res; + + pc_req = alloc_smp_req(PC_REQ_SIZE); + if (!pc_req) + return -ENOMEM; + + pc_resp = alloc_smp_resp(PC_RESP_SIZE); + if (!pc_resp) { + kfree(pc_req); + return -ENOMEM; + } + + pc_req[1] = SMP_PHY_CONTROL; + pc_req[9] = phy_id; + pc_req[10]= phy_func; + if (rates) { + pc_req[32] = rates->minimum_linkrate << 4; + pc_req[33] = rates->maximum_linkrate << 4; + } + + res = smp_execute_task(dev, pc_req, PC_REQ_SIZE, pc_resp,PC_RESP_SIZE); + + kfree(pc_resp); + kfree(pc_req); + return res; +} + +static void sas_ex_disable_phy(struct domain_device *dev, int phy_id) +{ + struct expander_device *ex = &dev->ex_dev; + struct ex_phy *phy = &ex->ex_phy[phy_id]; + + sas_smp_phy_control(dev, phy_id, PHY_FUNC_DISABLE, NULL); + phy->linkrate = SAS_PHY_DISABLED; +} + +static void sas_ex_disable_port(struct domain_device *dev, u8 *sas_addr) +{ + struct expander_device *ex = &dev->ex_dev; + int i; + + for (i = 0; i < ex->num_phys; i++) { + struct ex_phy *phy = &ex->ex_phy[i]; + + if (phy->phy_state == PHY_VACANT || + phy->phy_state == PHY_NOT_PRESENT) + continue; + + if (SAS_ADDR(phy->attached_sas_addr) == SAS_ADDR(sas_addr)) + sas_ex_disable_phy(dev, i); + } +} + +static int sas_dev_present_in_domain(struct asd_sas_port *port, + u8 *sas_addr) +{ + struct domain_device *dev; + + if (SAS_ADDR(port->sas_addr) == SAS_ADDR(sas_addr)) + return 1; + list_for_each_entry(dev, &port->dev_list, dev_list_node) { + if (SAS_ADDR(dev->sas_addr) == SAS_ADDR(sas_addr)) + return 1; + } + return 0; +} + +#define RPEL_REQ_SIZE 16 +#define RPEL_RESP_SIZE 32 +int sas_smp_get_phy_events(struct sas_phy *phy) +{ + int res; + struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent); + struct domain_device *dev = sas_find_dev_by_rphy(rphy); + u8 *req = alloc_smp_req(RPEL_REQ_SIZE); + u8 *resp = kzalloc(RPEL_RESP_SIZE, GFP_KERNEL); + + if (!resp) + return -ENOMEM; + + req[1] = SMP_REPORT_PHY_ERR_LOG; + req[9] = phy->number; + + res = smp_execute_task(dev, req, RPEL_REQ_SIZE, + resp, RPEL_RESP_SIZE); + + if (!res) + goto out; + + phy->invalid_dword_count = scsi_to_u32(&resp[12]); + phy->running_disparity_error_count = scsi_to_u32(&resp[16]); + phy->loss_of_dword_sync_count = scsi_to_u32(&resp[20]); + phy->phy_reset_problem_count = scsi_to_u32(&resp[24]); + + out: + kfree(resp); + return res; + +} + +#define RPS_REQ_SIZE 16 +#define RPS_RESP_SIZE 60 + +static int sas_get_report_phy_sata(struct domain_device *dev, + int phy_id, + struct smp_resp *rps_resp) +{ + int res; + u8 *rps_req = alloc_smp_req(RPS_REQ_SIZE); + + if (!rps_req) + return -ENOMEM; + + rps_req[1] = SMP_REPORT_PHY_SATA; + rps_req[9] = phy_id; + + res = smp_execute_task(dev, rps_req, RPS_REQ_SIZE, + rps_resp, RPS_RESP_SIZE); + + kfree(rps_req); + return 0; +} + +static void sas_ex_get_linkrate(struct domain_device *parent, + struct domain_device *child, + struct ex_phy *parent_phy) +{ + struct expander_device *parent_ex = &parent->ex_dev; + struct sas_port *port; + int i; + + child->pathways = 0; + + port = parent_phy->port; + + for (i = 0; i < parent_ex->num_phys; i++) { + struct ex_phy *phy = &parent_ex->ex_phy[i]; + + if (phy->phy_state == PHY_VACANT || + phy->phy_state == PHY_NOT_PRESENT) + continue; + + if (SAS_ADDR(phy->attached_sas_addr) == + SAS_ADDR(child->sas_addr)) { + + child->min_linkrate = min(parent->min_linkrate, + phy->linkrate); + child->max_linkrate = max(parent->max_linkrate, + phy->linkrate); + child->pathways++; + sas_port_add_phy(port, phy->phy); + } + } + child->linkrate = min(parent_phy->linkrate, child->max_linkrate); + child->pathways = min(child->pathways, parent->pathways); +} + +static struct domain_device *sas_ex_discover_end_dev( + struct domain_device *parent, int phy_id) +{ + struct expander_device *parent_ex = &parent->ex_dev; + struct ex_phy *phy = &parent_ex->ex_phy[phy_id]; + struct domain_device *child = NULL; + struct sas_rphy *rphy; + int res; + + if (phy->attached_sata_host || phy->attached_sata_ps) + return NULL; + + child = kzalloc(sizeof(*child), GFP_KERNEL); + if (!child) + return NULL; + + child->parent = parent; + child->port = parent->port; + child->iproto = phy->attached_iproto; + memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE); + sas_hash_addr(child->hashed_sas_addr, child->sas_addr); + phy->port = sas_port_alloc(&parent->rphy->dev, phy_id); + BUG_ON(!phy->port); + /* FIXME: better error handling*/ + BUG_ON(sas_port_add(phy->port) != 0); + sas_ex_get_linkrate(parent, child, phy); + + if ((phy->attached_tproto & SAS_PROTO_STP) || phy->attached_sata_dev) { + child->dev_type = SATA_DEV; + if (phy->attached_tproto & SAS_PROTO_STP) + child->tproto = phy->attached_tproto; + if (phy->attached_sata_dev) + child->tproto |= SATA_DEV; + res = sas_get_report_phy_sata(parent, phy_id, + &child->sata_dev.rps_resp); + if (res) { + SAS_DPRINTK("report phy sata to %016llx:0x%x returned " + "0x%x\n", SAS_ADDR(parent->sas_addr), + phy_id, res); + kfree(child); + return NULL; + } + memcpy(child->frame_rcvd, &child->sata_dev.rps_resp.rps.fis, + sizeof(struct dev_to_host_fis)); + sas_init_dev(child); + res = sas_discover_sata(child); + if (res) { + SAS_DPRINTK("sas_discover_sata() for device %16llx at " + "%016llx:0x%x returned 0x%x\n", + SAS_ADDR(child->sas_addr), + SAS_ADDR(parent->sas_addr), phy_id, res); + kfree(child); + return NULL; + } + } else if (phy->attached_tproto & SAS_PROTO_SSP) { + child->dev_type = SAS_END_DEV; + rphy = sas_end_device_alloc(phy->port); + /* FIXME: error handling */ + BUG_ON(!rphy); + child->tproto = phy->attached_tproto; + sas_init_dev(child); + + child->rphy = rphy; + sas_fill_in_rphy(child, rphy); + + spin_lock(&parent->port->dev_list_lock); + list_add_tail(&child->dev_list_node, &parent->port->dev_list); + spin_unlock(&parent->port->dev_list_lock); + + res = sas_discover_end_dev(child); + if (res) { + SAS_DPRINTK("sas_discover_end_dev() for device %16llx " + "at %016llx:0x%x returned 0x%x\n", + SAS_ADDR(child->sas_addr), + SAS_ADDR(parent->sas_addr), phy_id, res); + /* FIXME: this kfrees list elements without removing them */ + //kfree(child); + return NULL; + } + } else { + SAS_DPRINTK("target proto 0x%x at %016llx:0x%x not handled\n", + phy->attached_tproto, SAS_ADDR(parent->sas_addr), + phy_id); + } + + list_add_tail(&child->siblings, &parent_ex->children); + return child; +} + +static struct domain_device *sas_ex_discover_expander( + struct domain_device *parent, int phy_id) +{ + struct sas_expander_device *parent_ex = rphy_to_expander_device(parent->rphy); + struct ex_phy *phy = &parent->ex_dev.ex_phy[phy_id]; + struct domain_device *child = NULL; + struct sas_rphy *rphy; + struct sas_expander_device *edev; + struct asd_sas_port *port; + int res; + + if (phy->routing_attr == DIRECT_ROUTING) { + SAS_DPRINTK("ex %016llx:0x%x:D <--> ex %016llx:0x%x is not " + "allowed\n", + SAS_ADDR(parent->sas_addr), phy_id, + SAS_ADDR(phy->attached_sas_addr), + phy->attached_phy_id); + return NULL; + } + child = kzalloc(sizeof(*child), GFP_KERNEL); + if (!child) + return NULL; + + phy->port = sas_port_alloc(&parent->rphy->dev, phy_id); + /* FIXME: better error handling */ + BUG_ON(sas_port_add(phy->port) != 0); + + + switch (phy->attached_dev_type) { + case EDGE_DEV: + rphy = sas_expander_alloc(phy->port, + SAS_EDGE_EXPANDER_DEVICE); + break; + case FANOUT_DEV: + rphy = sas_expander_alloc(phy->port, + SAS_FANOUT_EXPANDER_DEVICE); + break; + default: + rphy = NULL; /* shut gcc up */ + BUG(); + } + port = parent->port; + child->rphy = rphy; + edev = rphy_to_expander_device(rphy); + child->dev_type = phy->attached_dev_type; + child->parent = parent; + child->port = port; + child->iproto = phy->attached_iproto; + child->tproto = phy->attached_tproto; + memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE); + sas_hash_addr(child->hashed_sas_addr, child->sas_addr); + sas_ex_get_linkrate(parent, child, phy); + edev->level = parent_ex->level + 1; + parent->port->disc.max_level = max(parent->port->disc.max_level, + edev->level); + sas_init_dev(child); + sas_fill_in_rphy(child, rphy); + sas_rphy_add(rphy); + + spin_lock(&parent->port->dev_list_lock); + list_add_tail(&child->dev_list_node, &parent->port->dev_list); + spin_unlock(&parent->port->dev_list_lock); + + res = sas_discover_expander(child); + if (res) { + kfree(child); + return NULL; + } + list_add_tail(&child->siblings, &parent->ex_dev.children); + return child; +} + +static int sas_ex_discover_dev(struct domain_device *dev, int phy_id) +{ + struct expander_device *ex = &dev->ex_dev; + struct ex_phy *ex_phy = &ex->ex_phy[phy_id]; + struct domain_device *child = NULL; + int res = 0; + + /* Phy state */ + if (ex_phy->linkrate == SAS_SATA_SPINUP_HOLD) { + if (!sas_smp_phy_control(dev, phy_id, PHY_FUNC_LINK_RESET, NULL)) + res = sas_ex_phy_discover(dev, phy_id); + if (res) + return res; + } + + /* Parent and domain coherency */ + if (!dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) == + SAS_ADDR(dev->port->sas_addr))) { + sas_add_parent_port(dev, phy_id); + return 0; + } + if (dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) == + SAS_ADDR(dev->parent->sas_addr))) { + sas_add_parent_port(dev, phy_id); + if (ex_phy->routing_attr == TABLE_ROUTING) + sas_configure_phy(dev, phy_id, dev->port->sas_addr, 1); + return 0; + } + + if (sas_dev_present_in_domain(dev->port, ex_phy->attached_sas_addr)) + sas_ex_disable_port(dev, ex_phy->attached_sas_addr); + + if (ex_phy->attached_dev_type == NO_DEVICE) { + if (ex_phy->routing_attr == DIRECT_ROUTING) { + memset(ex_phy->attached_sas_addr, 0, SAS_ADDR_SIZE); + sas_configure_routing(dev, ex_phy->attached_sas_addr); + } + return 0; + } else if (ex_phy->linkrate == SAS_LINK_RATE_UNKNOWN) + return 0; + + if (ex_phy->attached_dev_type != SAS_END_DEV && + ex_phy->attached_dev_type != FANOUT_DEV && + ex_phy->attached_dev_type != EDGE_DEV) { + SAS_DPRINTK("unknown device type(0x%x) attached to ex %016llx " + "phy 0x%x\n", ex_phy->attached_dev_type, + SAS_ADDR(dev->sas_addr), + phy_id); + return 0; + } + + res = sas_configure_routing(dev, ex_phy->attached_sas_addr); + if (res) { + SAS_DPRINTK("configure routing for dev %016llx " + "reported 0x%x. Forgotten\n", + SAS_ADDR(ex_phy->attached_sas_addr), res); + sas_disable_routing(dev, ex_phy->attached_sas_addr); + return res; + } + + switch (ex_phy->attached_dev_type) { + case SAS_END_DEV: + child = sas_ex_discover_end_dev(dev, phy_id); + break; + case FANOUT_DEV: + if (SAS_ADDR(dev->port->disc.fanout_sas_addr)) { + SAS_DPRINTK("second fanout expander %016llx phy 0x%x " + "attached to ex %016llx phy 0x%x\n", + SAS_ADDR(ex_phy->attached_sas_addr), + ex_phy->attached_phy_id, + SAS_ADDR(dev->sas_addr), + phy_id); + sas_ex_disable_phy(dev, phy_id); + break; + } else + memcpy(dev->port->disc.fanout_sas_addr, + ex_phy->attached_sas_addr, SAS_ADDR_SIZE); + /* fallthrough */ + case EDGE_DEV: + child = sas_ex_discover_expander(dev, phy_id); + break; + default: + break; + } + + if (child) { + int i; + + for (i = 0; i < ex->num_phys; i++) { + if (ex->ex_phy[i].phy_state == PHY_VACANT || + ex->ex_phy[i].phy_state == PHY_NOT_PRESENT) + continue; + + if (SAS_ADDR(ex->ex_phy[i].attached_sas_addr) == + SAS_ADDR(child->sas_addr)) + ex->ex_phy[i].phy_state= PHY_DEVICE_DISCOVERED; + } + } + + return res; +} + +static int sas_find_sub_addr(struct domain_device *dev, u8 *sub_addr) +{ + struct expander_device *ex = &dev->ex_dev; + int i; + + for (i = 0; i < ex->num_phys; i++) { + struct ex_phy *phy = &ex->ex_phy[i]; + + if (phy->phy_state == PHY_VACANT || + phy->phy_state == PHY_NOT_PRESENT) + continue; + + if ((phy->attached_dev_type == EDGE_DEV || + phy->attached_dev_type == FANOUT_DEV) && + phy->routing_attr == SUBTRACTIVE_ROUTING) { + + memcpy(sub_addr, phy->attached_sas_addr,SAS_ADDR_SIZE); + + return 1; + } + } + return 0; +} + +static int sas_check_level_subtractive_boundary(struct domain_device *dev) +{ + struct expander_device *ex = &dev->ex_dev; + struct domain_device *child; + u8 sub_addr[8] = {0, }; + + list_for_each_entry(child, &ex->children, siblings) { + if (child->dev_type != EDGE_DEV && + child->dev_type != FANOUT_DEV) + continue; + if (sub_addr[0] == 0) { + sas_find_sub_addr(child, sub_addr); + continue; + } else { + u8 s2[8]; + + if (sas_find_sub_addr(child, s2) && + (SAS_ADDR(sub_addr) != SAS_ADDR(s2))) { + + SAS_DPRINTK("ex %016llx->%016llx-?->%016llx " + "diverges from subtractive " + "boundary %016llx\n", + SAS_ADDR(dev->sas_addr), + SAS_ADDR(child->sas_addr), + SAS_ADDR(s2), + SAS_ADDR(sub_addr)); + + sas_ex_disable_port(child, s2); + } + } + } + return 0; +} +/** + * sas_ex_discover_devices -- discover devices attached to this expander + * dev: pointer to the expander domain device + * single: if you want to do a single phy, else set to -1; + * + * Configure this expander for use with its devices and register the + * devices of this expander. + */ +static int sas_ex_discover_devices(struct domain_device *dev, int single) +{ + struct expander_device *ex = &dev->ex_dev; + int i = 0, end = ex->num_phys; + int res = 0; + + if (0 <= single && single < end) { + i = single; + end = i+1; + } + + for ( ; i < end; i++) { + struct ex_phy *ex_phy = &ex->ex_phy[i]; + + if (ex_phy->phy_state == PHY_VACANT || + ex_phy->phy_state == PHY_NOT_PRESENT || + ex_phy->phy_state == PHY_DEVICE_DISCOVERED) + continue; + + switch (ex_phy->linkrate) { + case SAS_PHY_DISABLED: + case SAS_PHY_RESET_PROBLEM: + case SAS_SATA_PORT_SELECTOR: + continue; + default: + res = sas_ex_discover_dev(dev, i); + if (res) + break; + continue; + } + } + + if (!res) + sas_check_level_subtractive_boundary(dev); + + return res; +} + +static int sas_check_ex_subtractive_boundary(struct domain_device *dev) +{ + struct expander_device *ex = &dev->ex_dev; + int i; + u8 *sub_sas_addr = NULL; + + if (dev->dev_type != EDGE_DEV) + return 0; + + for (i = 0; i < ex->num_phys; i++) { + struct ex_phy *phy = &ex->ex_phy[i]; + + if (phy->phy_state == PHY_VACANT || + phy->phy_state == PHY_NOT_PRESENT) + continue; + + if ((phy->attached_dev_type == FANOUT_DEV || + phy->attached_dev_type == EDGE_DEV) && + phy->routing_attr == SUBTRACTIVE_ROUTING) { + + if (!sub_sas_addr) + sub_sas_addr = &phy->attached_sas_addr[0]; + else if (SAS_ADDR(sub_sas_addr) != + SAS_ADDR(phy->attached_sas_addr)) { + + SAS_DPRINTK("ex %016llx phy 0x%x " + "diverges(%016llx) on subtractive " + "boundary(%016llx). Disabled\n", + SAS_ADDR(dev->sas_addr), i, + SAS_ADDR(phy->attached_sas_addr), + SAS_ADDR(sub_sas_addr)); + sas_ex_disable_phy(dev, i); + } + } + } + return 0; +} + +static void sas_print_parent_topology_bug(struct domain_device *child, + struct ex_phy *parent_phy, + struct ex_phy *child_phy) +{ + static const char ra_char[] = { + [DIRECT_ROUTING] = 'D', + [SUBTRACTIVE_ROUTING] = 'S', + [TABLE_ROUTING] = 'T', + }; + static const char *ex_type[] = { + [EDGE_DEV] = "edge", + [FANOUT_DEV] = "fanout", + }; + struct domain_device *parent = child->parent; + + sas_printk("%s ex %016llx phy 0x%x <--> %s ex %016llx phy 0x%x " + "has %c:%c routing link!\n", + + ex_type[parent->dev_type], + SAS_ADDR(parent->sas_addr), + parent_phy->phy_id, + + ex_type[child->dev_type], + SAS_ADDR(child->sas_addr), + child_phy->phy_id, + + ra_char[parent_phy->routing_attr], + ra_char[child_phy->routing_attr]); +} + +static int sas_check_eeds(struct domain_device *child, + struct ex_phy *parent_phy, + struct ex_phy *child_phy) +{ + int res = 0; + struct domain_device *parent = child->parent; + + if (SAS_ADDR(parent->port->disc.fanout_sas_addr) != 0) { + res = -ENODEV; + SAS_DPRINTK("edge ex %016llx phy S:0x%x <--> edge ex %016llx " + "phy S:0x%x, while there is a fanout ex %016llx\n", + SAS_ADDR(parent->sas_addr), + parent_phy->phy_id, + SAS_ADDR(child->sas_addr), + child_phy->phy_id, + SAS_ADDR(parent->port->disc.fanout_sas_addr)); + } else if (SAS_ADDR(parent->port->disc.eeds_a) == 0) { + memcpy(parent->port->disc.eeds_a, parent->sas_addr, + SAS_ADDR_SIZE); + memcpy(parent->port->disc.eeds_b, child->sas_addr, + SAS_ADDR_SIZE); + } else if (((SAS_ADDR(parent->port->disc.eeds_a) == + SAS_ADDR(parent->sas_addr)) || + (SAS_ADDR(parent->port->disc.eeds_a) == + SAS_ADDR(child->sas_addr))) + && + ((SAS_ADDR(parent->port->disc.eeds_b) == + SAS_ADDR(parent->sas_addr)) || + (SAS_ADDR(parent->port->disc.eeds_b) == + SAS_ADDR(child->sas_addr)))) + ; + else { + res = -ENODEV; + SAS_DPRINTK("edge ex %016llx phy 0x%x <--> edge ex %016llx " + "phy 0x%x link forms a third EEDS!\n", + SAS_ADDR(parent->sas_addr), + parent_phy->phy_id, + SAS_ADDR(child->sas_addr), + child_phy->phy_id); + } + + return res; +} + +/* Here we spill over 80 columns. It is intentional. + */ +static int sas_check_parent_topology(struct domain_device *child) +{ + struct expander_device *child_ex = &child->ex_dev; + struct expander_device *parent_ex; + int i; + int res = 0; + + if (!child->parent) + return 0; + + if (child->parent->dev_type != EDGE_DEV && + child->parent->dev_type != FANOUT_DEV) + return 0; + + parent_ex = &child->parent->ex_dev; + + for (i = 0; i < parent_ex->num_phys; i++) { + struct ex_phy *parent_phy = &parent_ex->ex_phy[i]; + struct ex_phy *child_phy; + + if (parent_phy->phy_state == PHY_VACANT || + parent_phy->phy_state == PHY_NOT_PRESENT) + continue; + + if (SAS_ADDR(parent_phy->attached_sas_addr) != SAS_ADDR(child->sas_addr)) + continue; + + child_phy = &child_ex->ex_phy[parent_phy->attached_phy_id]; + + switch (child->parent->dev_type) { + case EDGE_DEV: + if (child->dev_type == FANOUT_DEV) { + if (parent_phy->routing_attr != SUBTRACTIVE_ROUTING || + child_phy->routing_attr != TABLE_ROUTING) { + sas_print_parent_topology_bug(child, parent_phy, child_phy); + res = -ENODEV; + } + } else if (parent_phy->routing_attr == SUBTRACTIVE_ROUTING) { + if (child_phy->routing_attr == SUBTRACTIVE_ROUTING) { + res = sas_check_eeds(child, parent_phy, child_phy); + } else if (child_phy->routing_attr != TABLE_ROUTING) { + sas_print_parent_topology_bug(child, parent_phy, child_phy); + res = -ENODEV; + } + } else if (parent_phy->routing_attr == TABLE_ROUTING && + child_phy->routing_attr != SUBTRACTIVE_ROUTING) { + sas_print_parent_topology_bug(child, parent_phy, child_phy); + res = -ENODEV; + } + break; + case FANOUT_DEV: + if (parent_phy->routing_attr != TABLE_ROUTING || + child_phy->routing_attr != SUBTRACTIVE_ROUTING) { + sas_print_parent_topology_bug(child, parent_phy, child_phy); + res = -ENODEV; + } + break; + default: + break; + } + } + + return res; +} + +#define RRI_REQ_SIZE 16 +#define RRI_RESP_SIZE 44 + +static int sas_configure_present(struct domain_device *dev, int phy_id, + u8 *sas_addr, int *index, int *present) +{ + int i, res = 0; + struct expander_device *ex = &dev->ex_dev; + struct ex_phy *phy = &ex->ex_phy[phy_id]; + u8 *rri_req; + u8 *rri_resp; + + *present = 0; + *index = 0; + + rri_req = alloc_smp_req(RRI_REQ_SIZE); + if (!rri_req) + return -ENOMEM; + + rri_resp = alloc_smp_resp(RRI_RESP_SIZE); + if (!rri_resp) { + kfree(rri_req); + return -ENOMEM; + } + + rri_req[1] = SMP_REPORT_ROUTE_INFO; + rri_req[9] = phy_id; + + for (i = 0; i < ex->max_route_indexes ; i++) { + *(__be16 *)(rri_req+6) = cpu_to_be16(i); + res = smp_execute_task(dev, rri_req, RRI_REQ_SIZE, rri_resp, + RRI_RESP_SIZE); + if (res) + goto out; + res = rri_resp[2]; + if (res == SMP_RESP_NO_INDEX) { + SAS_DPRINTK("overflow of indexes: dev %016llx " + "phy 0x%x index 0x%x\n", + SAS_ADDR(dev->sas_addr), phy_id, i); + goto out; + } else if (res != SMP_RESP_FUNC_ACC) { + SAS_DPRINTK("%s: dev %016llx phy 0x%x index 0x%x " + "result 0x%x\n", __FUNCTION__, + SAS_ADDR(dev->sas_addr), phy_id, i, res); + goto out; + } + if (SAS_ADDR(sas_addr) != 0) { + if (SAS_ADDR(rri_resp+16) == SAS_ADDR(sas_addr)) { + *index = i; + if ((rri_resp[12] & 0x80) == 0x80) + *present = 0; + else + *present = 1; + goto out; + } else if (SAS_ADDR(rri_resp+16) == 0) { + *index = i; + *present = 0; + goto out; + } + } else if (SAS_ADDR(rri_resp+16) == 0 && + phy->last_da_index < i) { + phy->last_da_index = i; + *index = i; + *present = 0; + goto out; + } + } + res = -1; +out: + kfree(rri_req); + kfree(rri_resp); + return res; +} + +#define CRI_REQ_SIZE 44 +#define CRI_RESP_SIZE 8 + +static int sas_configure_set(struct domain_device *dev, int phy_id, + u8 *sas_addr, int index, int include) +{ + int res; + u8 *cri_req; + u8 *cri_resp; + + cri_req = alloc_smp_req(CRI_REQ_SIZE); + if (!cri_req) + return -ENOMEM; + + cri_resp = alloc_smp_resp(CRI_RESP_SIZE); + if (!cri_resp) { + kfree(cri_req); + return -ENOMEM; + } + + cri_req[1] = SMP_CONF_ROUTE_INFO; + *(__be16 *)(cri_req+6) = cpu_to_be16(index); + cri_req[9] = phy_id; + if (SAS_ADDR(sas_addr) == 0 || !include) + cri_req[12] |= 0x80; + memcpy(cri_req+16, sas_addr, SAS_ADDR_SIZE); + + res = smp_execute_task(dev, cri_req, CRI_REQ_SIZE, cri_resp, + CRI_RESP_SIZE); + if (res) + goto out; + res = cri_resp[2]; + if (res == SMP_RESP_NO_INDEX) { + SAS_DPRINTK("overflow of indexes: dev %016llx phy 0x%x " + "index 0x%x\n", + SAS_ADDR(dev->sas_addr), phy_id, index); + } +out: + kfree(cri_req); + kfree(cri_resp); + return res; +} + +static int sas_configure_phy(struct domain_device *dev, int phy_id, + u8 *sas_addr, int include) +{ + int index; + int present; + int res; + + res = sas_configure_present(dev, phy_id, sas_addr, &index, &present); + if (res) + return res; + if (include ^ present) + return sas_configure_set(dev, phy_id, sas_addr, index,include); + + return res; +} + +/** + * sas_configure_parent -- configure routing table of parent + * parent: parent expander + * child: child expander + * sas_addr: SAS port identifier of device directly attached to child + */ +static int sas_configure_parent(struct domain_device *parent, + struct domain_device *child, + u8 *sas_addr, int include) +{ + struct expander_device *ex_parent = &parent->ex_dev; + int res = 0; + int i; + + if (parent->parent) { + res = sas_configure_parent(parent->parent, parent, sas_addr, + include); + if (res) + return res; + } + + if (ex_parent->conf_route_table == 0) { + SAS_DPRINTK("ex %016llx has self-configuring routing table\n", + SAS_ADDR(parent->sas_addr)); + return 0; + } + + for (i = 0; i < ex_parent->num_phys; i++) { + struct ex_phy *phy = &ex_parent->ex_phy[i]; + + if ((phy->routing_attr == TABLE_ROUTING) && + (SAS_ADDR(phy->attached_sas_addr) == + SAS_ADDR(child->sas_addr))) { + res = sas_configure_phy(parent, i, sas_addr, include); + if (res) + return res; + } + } + + return res; +} + +/** + * sas_configure_routing -- configure routing + * dev: expander device + * sas_addr: port identifier of device directly attached to the expander device + */ +static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr) +{ + if (dev->parent) + return sas_configure_parent(dev->parent, dev, sas_addr, 1); + return 0; +} + +static int sas_disable_routing(struct domain_device *dev, u8 *sas_addr) +{ + if (dev->parent) + return sas_configure_parent(dev->parent, dev, sas_addr, 0); + return 0; +} + +#if 0 +#define SMP_BIN_ATTR_NAME "smp_portal" + +static void sas_ex_smp_hook(struct domain_device *dev) +{ + struct expander_device *ex_dev = &dev->ex_dev; + struct bin_attribute *bin_attr = &ex_dev->smp_bin_attr; + + memset(bin_attr, 0, sizeof(*bin_attr)); + + bin_attr->attr.name = SMP_BIN_ATTR_NAME; + bin_attr->attr.owner = THIS_MODULE; + bin_attr->attr.mode = 0600; + + bin_attr->size = 0; + bin_attr->private = NULL; + bin_attr->read = smp_portal_read; + bin_attr->write= smp_portal_write; + bin_attr->mmap = NULL; + + ex_dev->smp_portal_pid = -1; + init_MUTEX(&ex_dev->smp_sema); +} +#endif + +/** + * sas_discover_expander -- expander discovery + * @ex: pointer to expander domain device + * + * See comment in sas_discover_sata(). + */ +static int sas_discover_expander(struct domain_device *dev) +{ + int res; + + res = sas_notify_lldd_dev_found(dev); + if (res) + return res; + + res = sas_ex_general(dev); + if (res) + goto out_err; + res = sas_ex_manuf_info(dev); + if (res) + goto out_err; + + res = sas_expander_discover(dev); + if (res) { + SAS_DPRINTK("expander %016llx discovery failed(0x%x)\n", + SAS_ADDR(dev->sas_addr), res); + goto out_err; + } + + sas_check_ex_subtractive_boundary(dev); + res = sas_check_parent_topology(dev); + if (res) + goto out_err; + return 0; +out_err: + sas_notify_lldd_dev_gone(dev); + return res; +} + +static int sas_ex_level_discovery(struct asd_sas_port *port, const int level) +{ + int res = 0; + struct domain_device *dev; + + list_for_each_entry(dev, &port->dev_list, dev_list_node) { + if (dev->dev_type == EDGE_DEV || + dev->dev_type == FANOUT_DEV) { + struct sas_expander_device *ex = + rphy_to_expander_device(dev->rphy); + + if (level == ex->level) + res = sas_ex_discover_devices(dev, -1); + else if (level > 0) + res = sas_ex_discover_devices(port->port_dev, -1); + + } + } + + return res; +} + +static int sas_ex_bfs_disc(struct asd_sas_port *port) +{ + int res; + int level; + + do { + level = port->disc.max_level; + res = sas_ex_level_discovery(port, level); + mb(); + } while (level < port->disc.max_level); + + return res; +} + +int sas_discover_root_expander(struct domain_device *dev) +{ + int res; + struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy); + + sas_rphy_add(dev->rphy); + + ex->level = dev->port->disc.max_level; /* 0 */ + res = sas_discover_expander(dev); + if (!res) + sas_ex_bfs_disc(dev->port); + + return res; +} + +/* ---------- Domain revalidation ---------- */ + +static int sas_get_phy_discover(struct domain_device *dev, + int phy_id, struct smp_resp *disc_resp) +{ + int res; + u8 *disc_req; + + disc_req = alloc_smp_req(DISCOVER_REQ_SIZE); + if (!disc_req) + return -ENOMEM; + + disc_req[1] = SMP_DISCOVER; + disc_req[9] = phy_id; + + res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE, + disc_resp, DISCOVER_RESP_SIZE); + if (res) + goto out; + else if (disc_resp->result != SMP_RESP_FUNC_ACC) { + res = disc_resp->result; + goto out; + } +out: + kfree(disc_req); + return res; +} + +static int sas_get_phy_change_count(struct domain_device *dev, + int phy_id, int *pcc) +{ + int res; + struct smp_resp *disc_resp; + + disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE); + if (!disc_resp) + return -ENOMEM; + + res = sas_get_phy_discover(dev, phy_id, disc_resp); + if (!res) + *pcc = disc_resp->disc.change_count; + + kfree(disc_resp); + return res; +} + +static int sas_get_phy_attached_sas_addr(struct domain_device *dev, + int phy_id, u8 *attached_sas_addr) +{ + int res; + struct smp_resp *disc_resp; + struct discover_resp *dr; + + disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE); + if (!disc_resp) + return -ENOMEM; + dr = &disc_resp->disc; + + res = sas_get_phy_discover(dev, phy_id, disc_resp); + if (!res) { + memcpy(attached_sas_addr,disc_resp->disc.attached_sas_addr,8); + if (dr->attached_dev_type == 0) + memset(attached_sas_addr, 0, 8); + } + kfree(disc_resp); + return res; +} + +static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id, + int from_phy) +{ + struct expander_device *ex = &dev->ex_dev; + int res = 0; + int i; + + for (i = from_phy; i < ex->num_phys; i++) { + int phy_change_count = 0; + + res = sas_get_phy_change_count(dev, i, &phy_change_count); + if (res) + goto out; + else if (phy_change_count != ex->ex_phy[i].phy_change_count) { + ex->ex_phy[i].phy_change_count = phy_change_count; + *phy_id = i; + return 0; + } + } +out: + return res; +} + +static int sas_get_ex_change_count(struct domain_device *dev, int *ecc) +{ + int res; + u8 *rg_req; + struct smp_resp *rg_resp; + + rg_req = alloc_smp_req(RG_REQ_SIZE); + if (!rg_req) + return -ENOMEM; + + rg_resp = alloc_smp_resp(RG_RESP_SIZE); + if (!rg_resp) { + kfree(rg_req); + return -ENOMEM; + } + + rg_req[1] = SMP_REPORT_GENERAL; + + res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp, + RG_RESP_SIZE); + if (res) + goto out; + if (rg_resp->result != SMP_RESP_FUNC_ACC) { + res = rg_resp->result; + goto out; + } + + *ecc = be16_to_cpu(rg_resp->rg.change_count); +out: + kfree(rg_resp); + kfree(rg_req); + return res; +} + +static int sas_find_bcast_dev(struct domain_device *dev, + struct domain_device **src_dev) +{ + struct expander_device *ex = &dev->ex_dev; + int ex_change_count = -1; + int res; + + res = sas_get_ex_change_count(dev, &ex_change_count); + if (res) + goto out; + if (ex_change_count != -1 && + ex_change_count != ex->ex_change_count) { + *src_dev = dev; + ex->ex_change_count = ex_change_count; + } else { + struct domain_device *ch; + + list_for_each_entry(ch, &ex->children, siblings) { + if (ch->dev_type == EDGE_DEV || + ch->dev_type == FANOUT_DEV) { + res = sas_find_bcast_dev(ch, src_dev); + if (src_dev) + return res; + } + } + } +out: + return res; +} + +static void sas_unregister_ex_tree(struct domain_device *dev) +{ + struct expander_device *ex = &dev->ex_dev; + struct domain_device *child, *n; + + list_for_each_entry_safe(child, n, &ex->children, siblings) { + if (child->dev_type == EDGE_DEV || + child->dev_type == FANOUT_DEV) + sas_unregister_ex_tree(child); + else + sas_unregister_dev(child); + } + sas_unregister_dev(dev); +} + +static void sas_unregister_devs_sas_addr(struct domain_device *parent, + int phy_id) +{ + struct expander_device *ex_dev = &parent->ex_dev; + struct ex_phy *phy = &ex_dev->ex_phy[phy_id]; + struct domain_device *child, *n; + + list_for_each_entry_safe(child, n, &ex_dev->children, siblings) { + if (SAS_ADDR(child->sas_addr) == + SAS_ADDR(phy->attached_sas_addr)) { + if (child->dev_type == EDGE_DEV || + child->dev_type == FANOUT_DEV) + sas_unregister_ex_tree(child); + else + sas_unregister_dev(child); + break; + } + } + sas_disable_routing(parent, phy->attached_sas_addr); + memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE); + sas_port_delete_phy(phy->port, phy->phy); + if (phy->port->num_phys == 0) + sas_port_delete(phy->port); + phy->port = NULL; +} + +static int sas_discover_bfs_by_root_level(struct domain_device *root, + const int level) +{ + struct expander_device *ex_root = &root->ex_dev; + struct domain_device *child; + int res = 0; + + list_for_each_entry(child, &ex_root->children, siblings) { + if (child->dev_type == EDGE_DEV || + child->dev_type == FANOUT_DEV) { + struct sas_expander_device *ex = + rphy_to_expander_device(child->rphy); + + if (level > ex->level) + res = sas_discover_bfs_by_root_level(child, + level); + else if (level == ex->level) + res = sas_ex_discover_devices(child, -1); + } + } + return res; +} + +static int sas_discover_bfs_by_root(struct domain_device *dev) +{ + int res; + struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy); + int level = ex->level+1; + + res = sas_ex_discover_devices(dev, -1); + if (res) + goto out; + do { + res = sas_discover_bfs_by_root_level(dev, level); + mb(); + level += 1; + } while (level <= dev->port->disc.max_level); +out: + return res; +} + +static int sas_discover_new(struct domain_device *dev, int phy_id) +{ + struct ex_phy *ex_phy = &dev->ex_dev.ex_phy[phy_id]; + struct domain_device *child; + int res; + + SAS_DPRINTK("ex %016llx phy%d new device attached\n", + SAS_ADDR(dev->sas_addr), phy_id); + res = sas_ex_phy_discover(dev, phy_id); + if (res) + goto out; + res = sas_ex_discover_devices(dev, phy_id); + if (res) + goto out; + list_for_each_entry(child, &dev->ex_dev.children, siblings) { + if (SAS_ADDR(child->sas_addr) == + SAS_ADDR(ex_phy->attached_sas_addr)) { + if (child->dev_type == EDGE_DEV || + child->dev_type == FANOUT_DEV) + res = sas_discover_bfs_by_root(child); + break; + } + } +out: + return res; +} + +static int sas_rediscover_dev(struct domain_device *dev, int phy_id) +{ + struct expander_device *ex = &dev->ex_dev; + struct ex_phy *phy = &ex->ex_phy[phy_id]; + u8 attached_sas_addr[8]; + int res; + + res = sas_get_phy_attached_sas_addr(dev, phy_id, attached_sas_addr); + switch (res) { + case SMP_RESP_NO_PHY: + phy->phy_state = PHY_NOT_PRESENT; + sas_unregister_devs_sas_addr(dev, phy_id); + goto out; break; + case SMP_RESP_PHY_VACANT: + phy->phy_state = PHY_VACANT; + sas_unregister_devs_sas_addr(dev, phy_id); + goto out; break; + case SMP_RESP_FUNC_ACC: + break; + } + + if (SAS_ADDR(attached_sas_addr) == 0) { + phy->phy_state = PHY_EMPTY; + sas_unregister_devs_sas_addr(dev, phy_id); + } else if (SAS_ADDR(attached_sas_addr) == + SAS_ADDR(phy->attached_sas_addr)) { + SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter\n", + SAS_ADDR(dev->sas_addr), phy_id); + sas_ex_phy_discover(dev, phy_id); + } else + res = sas_discover_new(dev, phy_id); +out: + return res; +} + +static int sas_rediscover(struct domain_device *dev, const int phy_id) +{ + struct expander_device *ex = &dev->ex_dev; + struct ex_phy *changed_phy = &ex->ex_phy[phy_id]; + int res = 0; + int i; + + SAS_DPRINTK("ex %016llx phy%d originated BROADCAST(CHANGE)\n", + SAS_ADDR(dev->sas_addr), phy_id); + + if (SAS_ADDR(changed_phy->attached_sas_addr) != 0) { + for (i = 0; i < ex->num_phys; i++) { + struct ex_phy *phy = &ex->ex_phy[i]; + + if (i == phy_id) + continue; + if (SAS_ADDR(phy->attached_sas_addr) == + SAS_ADDR(changed_phy->attached_sas_addr)) { + SAS_DPRINTK("phy%d part of wide port with " + "phy%d\n", phy_id, i); + goto out; + } + } + res = sas_rediscover_dev(dev, phy_id); + } else + res = sas_discover_new(dev, phy_id); +out: + return res; +} + +/** + * sas_revalidate_domain -- revalidate the domain + * @port: port to the domain of interest + * + * NOTE: this process _must_ quit (return) as soon as any connection + * errors are encountered. Connection recovery is done elsewhere. + * Discover process only interrogates devices in order to discover the + * domain. + */ +int sas_ex_revalidate_domain(struct domain_device *port_dev) +{ + int res; + struct domain_device *dev = NULL; + + res = sas_find_bcast_dev(port_dev, &dev); + if (res) + goto out; + if (dev) { + struct expander_device *ex = &dev->ex_dev; + int i = 0, phy_id; + + do { + phy_id = -1; + res = sas_find_bcast_phy(dev, &phy_id, i); + if (phy_id == -1) + break; + res = sas_rediscover(dev, phy_id); + i = phy_id + 1; + } while (i < ex->num_phys); + } +out: + return res; +} + +#if 0 +/* ---------- SMP portal ---------- */ + +static ssize_t smp_portal_write(struct kobject *kobj, char *buf, loff_t offs, + size_t size) +{ + struct domain_device *dev = to_dom_device(kobj); + struct expander_device *ex = &dev->ex_dev; + + if (offs != 0) + return -EFBIG; + else if (size == 0) + return 0; + + down_interruptible(&ex->smp_sema); + if (ex->smp_req) + kfree(ex->smp_req); + ex->smp_req = kzalloc(size, GFP_USER); + if (!ex->smp_req) { + up(&ex->smp_sema); + return -ENOMEM; + } + memcpy(ex->smp_req, buf, size); + ex->smp_req_size = size; + ex->smp_portal_pid = current->pid; + up(&ex->smp_sema); + + return size; +} + +static ssize_t smp_portal_read(struct kobject *kobj, char *buf, loff_t offs, + size_t size) +{ + struct domain_device *dev = to_dom_device(kobj); + struct expander_device *ex = &dev->ex_dev; + u8 *smp_resp; + int res = -EINVAL; + + /* XXX: sysfs gives us an offset of 0x10 or 0x8 while in fact + * it should be 0. + */ + + down_interruptible(&ex->smp_sema); + if (!ex->smp_req || ex->smp_portal_pid != current->pid) + goto out; + + res = 0; + if (size == 0) + goto out; + + res = -ENOMEM; + smp_resp = alloc_smp_resp(size); + if (!smp_resp) + goto out; + res = smp_execute_task(dev, ex->smp_req, ex->smp_req_size, + smp_resp, size); + if (!res) { + memcpy(buf, smp_resp, size); + res = size; + } + + kfree(smp_resp); +out: + kfree(ex->smp_req); + ex->smp_req = NULL; + ex->smp_req_size = 0; + ex->smp_portal_pid = -1; + up(&ex->smp_sema); + return res; +} +#endif |