diff options
Diffstat (limited to 'drivers/scsi/isci/remote_device.h')
| -rw-r--r-- | drivers/scsi/isci/remote_device.h | 212 |
1 files changed, 95 insertions, 117 deletions
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 483ee50152f3..58637ee08f55 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -82,10 +82,9 @@ struct isci_remote_device { #define IDEV_START_PENDING 0 #define IDEV_STOP_PENDING 1 #define IDEV_ALLOCATED 2 - #define IDEV_EH 3 - #define IDEV_GONE 4 - #define IDEV_IO_READY 5 - #define IDEV_IO_NCQERROR 6 + #define IDEV_GONE 3 + #define IDEV_IO_READY 4 + #define IDEV_IO_NCQERROR 5 unsigned long flags; struct kref kref; struct isci_port *isci_port; @@ -180,122 +179,101 @@ enum sci_status sci_remote_device_reset_complete( /** * enum sci_remote_device_states - This enumeration depicts all the states * for the common remote device state machine. + * @SCI_DEV_INITIAL: Simply the initial state for the base remote device + * state machine. * + * @SCI_DEV_STOPPED: This state indicates that the remote device has + * successfully been stopped. In this state no new IO operations are + * permitted. This state is entered from the INITIAL state. This state + * is entered from the STOPPING state. * + * @SCI_DEV_STARTING: This state indicates the the remote device is in + * the process of becoming ready (i.e. starting). In this state no new + * IO operations are permitted. This state is entered from the STOPPED + * state. + * + * @SCI_DEV_READY: This state indicates the remote device is now ready. + * Thus, the user is able to perform IO operations on the remote device. + * This state is entered from the STARTING state. + * + * @SCI_STP_DEV_IDLE: This is the idle substate for the stp remote + * device. When there are no active IO for the device it is is in this + * state. + * + * @SCI_STP_DEV_CMD: This is the command state for for the STP remote + * device. This state is entered when the device is processing a + * non-NCQ command. The device object will fail any new start IO + * requests until this command is complete. + * + * @SCI_STP_DEV_NCQ: This is the NCQ state for the STP remote device. + * This state is entered when the device is processing an NCQ reuqest. + * It will remain in this state so long as there is one or more NCQ + * requests being processed. + * + * @SCI_STP_DEV_NCQ_ERROR: This is the NCQ error state for the STP + * remote device. This state is entered when an SDB error FIS is + * received by the device object while in the NCQ state. The device + * object will only accept a READ LOG command while in this state. + * + * @SCI_STP_DEV_ATAPI_ERROR: This is the ATAPI error state for the STP + * ATAPI remote device. This state is entered when ATAPI device sends + * error status FIS without data while the device object is in CMD + * state. A suspension event is expected in this state. The device + * object will resume right away. + * + * @SCI_STP_DEV_AWAIT_RESET: This is the READY substate indicates the + * device is waiting for the RESET task coming to be recovered from + * certain hardware specific error. + * + * @SCI_SMP_DEV_IDLE: This is the ready operational substate for the + * remote device. This is the normal operational state for a remote + * device. + * + * @SCI_SMP_DEV_CMD: This is the suspended state for the remote device. + * This is the state that the device is placed in when a RNC suspend is + * received by the SCU hardware. + * + * @SCI_DEV_STOPPING: This state indicates that the remote device is in + * the process of stopping. In this state no new IO operations are + * permitted, but existing IO operations are allowed to complete. This + * state is entered from the READY state. This state is entered from + * the FAILED state. + * + * @SCI_DEV_FAILED: This state indicates that the remote device has + * failed. In this state no new IO operations are permitted. This + * state is entered from the INITIALIZING state. This state is entered + * from the READY state. + * + * @SCI_DEV_RESETTING: This state indicates the device is being reset. + * In this state no new IO operations are permitted. This state is + * entered from the READY state. + * + * @SCI_DEV_FINAL: Simply the final state for the base remote device + * state machine. */ -enum sci_remote_device_states { - /** - * Simply the initial state for the base remote device state machine. - */ - SCI_DEV_INITIAL, - - /** - * This state indicates that the remote device has successfully been - * stopped. In this state no new IO operations are permitted. - * This state is entered from the INITIAL state. - * This state is entered from the STOPPING state. - */ - SCI_DEV_STOPPED, - - /** - * This state indicates the the remote device is in the process of - * becoming ready (i.e. starting). In this state no new IO operations - * are permitted. - * This state is entered from the STOPPED state. - */ - SCI_DEV_STARTING, - - /** - * This state indicates the remote device is now ready. Thus, the user - * is able to perform IO operations on the remote device. - * This state is entered from the STARTING state. - */ - SCI_DEV_READY, - - /** - * This is the idle substate for the stp remote device. When there are no - * active IO for the device it is is in this state. - */ - SCI_STP_DEV_IDLE, - - /** - * This is the command state for for the STP remote device. This state is - * entered when the device is processing a non-NCQ command. The device object - * will fail any new start IO requests until this command is complete. - */ - SCI_STP_DEV_CMD, - - /** - * This is the NCQ state for the STP remote device. This state is entered - * when the device is processing an NCQ reuqest. It will remain in this state - * so long as there is one or more NCQ requests being processed. - */ - SCI_STP_DEV_NCQ, - - /** - * This is the NCQ error state for the STP remote device. This state is - * entered when an SDB error FIS is received by the device object while in the - * NCQ state. The device object will only accept a READ LOG command while in - * this state. - */ - SCI_STP_DEV_NCQ_ERROR, - - /** - * This is the ATAPI error state for the STP ATAPI remote device. - * This state is entered when ATAPI device sends error status FIS - * without data while the device object is in CMD state. - * A suspension event is expected in this state. - * The device object will resume right away. - */ - SCI_STP_DEV_ATAPI_ERROR, - - /** - * This is the READY substate indicates the device is waiting for the RESET task - * coming to be recovered from certain hardware specific error. - */ - SCI_STP_DEV_AWAIT_RESET, - - /** - * This is the ready operational substate for the remote device. This is the - * normal operational state for a remote device. - */ - SCI_SMP_DEV_IDLE, - - /** - * This is the suspended state for the remote device. This is the state that - * the device is placed in when a RNC suspend is received by the SCU hardware. - */ - SCI_SMP_DEV_CMD, - - /** - * This state indicates that the remote device is in the process of - * stopping. In this state no new IO operations are permitted, but - * existing IO operations are allowed to complete. - * This state is entered from the READY state. - * This state is entered from the FAILED state. - */ - SCI_DEV_STOPPING, - - /** - * This state indicates that the remote device has failed. - * In this state no new IO operations are permitted. - * This state is entered from the INITIALIZING state. - * This state is entered from the READY state. - */ - SCI_DEV_FAILED, - - /** - * This state indicates the device is being reset. - * In this state no new IO operations are permitted. - * This state is entered from the READY state. - */ - SCI_DEV_RESETTING, - - /** - * Simply the final state for the base remote device state machine. - */ - SCI_DEV_FINAL, -}; +#define REMOTE_DEV_STATES {\ + C(DEV_INITIAL),\ + C(DEV_STOPPED),\ + C(DEV_STARTING),\ + C(DEV_READY),\ + C(STP_DEV_IDLE),\ + C(STP_DEV_CMD),\ + C(STP_DEV_NCQ),\ + C(STP_DEV_NCQ_ERROR),\ + C(STP_DEV_ATAPI_ERROR),\ + C(STP_DEV_AWAIT_RESET),\ + C(SMP_DEV_IDLE),\ + C(SMP_DEV_CMD),\ + C(DEV_STOPPING),\ + C(DEV_FAILED),\ + C(DEV_RESETTING),\ + C(DEV_FINAL),\ + } +#undef C +#define C(a) SCI_##a +enum sci_remote_device_states REMOTE_DEV_STATES; +#undef C +const char *dev_state_name(enum sci_remote_device_states state); static inline struct isci_remote_device *rnc_to_dev(struct sci_remote_node_context *rnc) { |