summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/isci/phy.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/isci/phy.c')
-rw-r--r--drivers/scsi/isci/phy.c172
1 files changed, 111 insertions, 61 deletions
diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c
index 35f50c2183e1..fe18acfd6eb3 100644
--- a/drivers/scsi/isci/phy.c
+++ b/drivers/scsi/isci/phy.c
@@ -91,22 +91,23 @@ sci_phy_transport_layer_initialization(struct isci_phy *iphy,
static enum sci_status
sci_phy_link_layer_initialization(struct isci_phy *iphy,
- struct scu_link_layer_registers __iomem *reg)
+ struct scu_link_layer_registers __iomem *llr)
{
struct isci_host *ihost = iphy->owning_port->owning_controller;
+ struct sci_phy_user_params *phy_user;
+ struct sci_phy_oem_params *phy_oem;
int phy_idx = iphy->phy_index;
- struct sci_phy_user_params *phy_user = &ihost->user_parameters.phys[phy_idx];
- struct sci_phy_oem_params *phy_oem =
- &ihost->oem_parameters.phys[phy_idx];
- u32 phy_configuration;
struct sci_phy_cap phy_cap;
+ u32 phy_configuration;
u32 parity_check = 0;
u32 parity_count = 0;
u32 llctl, link_rate;
u32 clksm_value = 0;
u32 sp_timeouts = 0;
- iphy->link_layer_registers = reg;
+ phy_user = &ihost->user_parameters.phys[phy_idx];
+ phy_oem = &ihost->oem_parameters.phys[phy_idx];
+ iphy->link_layer_registers = llr;
/* Set our IDENTIFY frame data */
#define SCI_END_DEVICE 0x01
@@ -116,32 +117,26 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy,
SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) |
SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) |
SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE),
- &iphy->link_layer_registers->transmit_identification);
+ &llr->transmit_identification);
/* Write the device SAS Address */
- writel(0xFEDCBA98,
- &iphy->link_layer_registers->sas_device_name_high);
- writel(phy_idx, &iphy->link_layer_registers->sas_device_name_low);
+ writel(0xFEDCBA98, &llr->sas_device_name_high);
+ writel(phy_idx, &llr->sas_device_name_low);
/* Write the source SAS Address */
- writel(phy_oem->sas_address.high,
- &iphy->link_layer_registers->source_sas_address_high);
- writel(phy_oem->sas_address.low,
- &iphy->link_layer_registers->source_sas_address_low);
+ writel(phy_oem->sas_address.high, &llr->source_sas_address_high);
+ writel(phy_oem->sas_address.low, &llr->source_sas_address_low);
/* Clear and Set the PHY Identifier */
- writel(0, &iphy->link_layer_registers->identify_frame_phy_id);
- writel(SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx),
- &iphy->link_layer_registers->identify_frame_phy_id);
+ writel(0, &llr->identify_frame_phy_id);
+ writel(SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx), &llr->identify_frame_phy_id);
/* Change the initial state of the phy configuration register */
- phy_configuration =
- readl(&iphy->link_layer_registers->phy_configuration);
+ phy_configuration = readl(&llr->phy_configuration);
/* Hold OOB state machine in reset */
phy_configuration |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
- writel(phy_configuration,
- &iphy->link_layer_registers->phy_configuration);
+ writel(phy_configuration, &llr->phy_configuration);
/* Configure the SNW capabilities */
phy_cap.all = 0;
@@ -149,15 +144,64 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy,
phy_cap.gen3_no_ssc = 1;
phy_cap.gen2_no_ssc = 1;
phy_cap.gen1_no_ssc = 1;
- if (ihost->oem_parameters.controller.do_enable_ssc == true) {
+ if (ihost->oem_parameters.controller.do_enable_ssc) {
+ struct scu_afe_registers __iomem *afe = &ihost->scu_registers->afe;
+ struct scu_afe_transceiver *xcvr = &afe->scu_afe_xcvr[phy_idx];
+ struct isci_pci_info *pci_info = to_pci_info(ihost->pdev);
+ bool en_sas = false;
+ bool en_sata = false;
+ u32 sas_type = 0;
+ u32 sata_spread = 0x2;
+ u32 sas_spread = 0x2;
+
phy_cap.gen3_ssc = 1;
phy_cap.gen2_ssc = 1;
phy_cap.gen1_ssc = 1;
+
+ if (pci_info->orom->hdr.version < ISCI_ROM_VER_1_1)
+ en_sas = en_sata = true;
+ else {
+ sata_spread = ihost->oem_parameters.controller.ssc_sata_tx_spread_level;
+ sas_spread = ihost->oem_parameters.controller.ssc_sas_tx_spread_level;
+
+ if (sata_spread)
+ en_sata = true;
+
+ if (sas_spread) {
+ en_sas = true;
+ sas_type = ihost->oem_parameters.controller.ssc_sas_tx_type;
+ }
+
+ }
+
+ if (en_sas) {
+ u32 reg;
+
+ reg = readl(&xcvr->afe_xcvr_control0);
+ reg |= (0x00100000 | (sas_type << 19));
+ writel(reg, &xcvr->afe_xcvr_control0);
+
+ reg = readl(&xcvr->afe_tx_ssc_control);
+ reg |= sas_spread << 8;
+ writel(reg, &xcvr->afe_tx_ssc_control);
+ }
+
+ if (en_sata) {
+ u32 reg;
+
+ reg = readl(&xcvr->afe_tx_ssc_control);
+ reg |= sata_spread;
+ writel(reg, &xcvr->afe_tx_ssc_control);
+
+ reg = readl(&llr->stp_control);
+ reg |= 1 << 12;
+ writel(reg, &llr->stp_control);
+ }
}
- /*
- * The SAS specification indicates that the phy_capabilities that
- * are transmitted shall have an even parity. Calculate the parity. */
+ /* The SAS specification indicates that the phy_capabilities that
+ * are transmitted shall have an even parity. Calculate the parity.
+ */
parity_check = phy_cap.all;
while (parity_check != 0) {
if (parity_check & 0x1)
@@ -165,20 +209,20 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy,
parity_check >>= 1;
}
- /*
- * If parity indicates there are an odd number of bits set, then
- * set the parity bit to 1 in the phy capabilities. */
+ /* If parity indicates there are an odd number of bits set, then
+ * set the parity bit to 1 in the phy capabilities.
+ */
if ((parity_count % 2) != 0)
phy_cap.parity = 1;
- writel(phy_cap.all, &iphy->link_layer_registers->phy_capabilities);
+ writel(phy_cap.all, &llr->phy_capabilities);
/* Set the enable spinup period but disable the ability to send
* notify enable spinup
*/
writel(SCU_ENSPINUP_GEN_VAL(COUNT,
phy_user->notify_enable_spin_up_insertion_frequency),
- &iphy->link_layer_registers->notify_enable_spinup_control);
+ &llr->notify_enable_spinup_control);
/* Write the ALIGN Insertion Ferequency for connected phy and
* inpendent of connected state
@@ -189,11 +233,13 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy,
clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL,
phy_user->align_insertion_frequency);
- writel(clksm_value, &iphy->link_layer_registers->clock_skew_management);
+ writel(clksm_value, &llr->clock_skew_management);
- /* @todo Provide a way to write this register correctly */
- writel(0x02108421,
- &iphy->link_layer_registers->afe_lookup_table_control);
+ if (is_c0(ihost->pdev) || is_c1(ihost->pdev)) {
+ writel(0x04210400, &llr->afe_lookup_table_control);
+ writel(0x020A7C05, &llr->sas_primitive_timeout);
+ } else
+ writel(0x02108421, &llr->afe_lookup_table_control);
llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT,
(u8)ihost->user_parameters.no_outbound_task_timeout);
@@ -210,9 +256,9 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy,
break;
}
llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate);
- writel(llctl, &iphy->link_layer_registers->link_layer_control);
+ writel(llctl, &llr->link_layer_control);
- sp_timeouts = readl(&iphy->link_layer_registers->sas_phy_timeouts);
+ sp_timeouts = readl(&llr->sas_phy_timeouts);
/* Clear the default 0x36 (54us) RATE_CHANGE timeout value. */
sp_timeouts &= ~SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0xFF);
@@ -222,20 +268,23 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy,
*/
sp_timeouts |= SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0x3B);
- writel(sp_timeouts, &iphy->link_layer_registers->sas_phy_timeouts);
+ writel(sp_timeouts, &llr->sas_phy_timeouts);
if (is_a2(ihost->pdev)) {
- /* Program the max ARB time for the PHY to 700us so we inter-operate with
- * the PMC expander which shuts down PHYs if the expander PHY generates too
- * many breaks. This time value will guarantee that the initiator PHY will
- * generate the break.
+ /* Program the max ARB time for the PHY to 700us so we
+ * inter-operate with the PMC expander which shuts down
+ * PHYs if the expander PHY generates too many breaks.
+ * This time value will guarantee that the initiator PHY
+ * will generate the break.
*/
writel(SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME,
- &iphy->link_layer_registers->maximum_arbitration_wait_timer_timeout);
+ &llr->maximum_arbitration_wait_timer_timeout);
}
- /* Disable link layer hang detection, rely on the OS timeout for I/O timeouts. */
- writel(0, &iphy->link_layer_registers->link_layer_hang_detection_timeout);
+ /* Disable link layer hang detection, rely on the OS timeout for
+ * I/O timeouts.
+ */
+ writel(0, &llr->link_layer_hang_detection_timeout);
/* We can exit the initial state to the stopped state */
sci_change_state(&iphy->sm, SCI_PHY_STOPPED);
@@ -1049,24 +1098,25 @@ static void scu_link_layer_stop_protocol_engine(
writel(enable_spinup_value, &iphy->link_layer_registers->notify_enable_spinup_control);
}
-/**
- *
- *
- * This method will start the OOB/SN state machine for this struct isci_phy object.
- */
-static void scu_link_layer_start_oob(
- struct isci_phy *iphy)
+static void scu_link_layer_start_oob(struct isci_phy *iphy)
{
- u32 scu_sas_pcfg_value;
-
- scu_sas_pcfg_value =
- readl(&iphy->link_layer_registers->phy_configuration);
- scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE);
- scu_sas_pcfg_value &=
- ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) |
- SCU_SAS_PCFG_GEN_BIT(HARD_RESET));
- writel(scu_sas_pcfg_value,
- &iphy->link_layer_registers->phy_configuration);
+ struct scu_link_layer_registers __iomem *ll = iphy->link_layer_registers;
+ u32 val;
+
+ /** Reset OOB sequence - start */
+ val = readl(&ll->phy_configuration);
+ val &= ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) |
+ SCU_SAS_PCFG_GEN_BIT(HARD_RESET));
+ writel(val, &ll->phy_configuration);
+ readl(&ll->phy_configuration); /* flush */
+ /** Reset OOB sequence - end */
+
+ /** Start OOB sequence - start */
+ val = readl(&ll->phy_configuration);
+ val |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE);
+ writel(val, &ll->phy_configuration);
+ readl(&ll->phy_configuration); /* flush */
+ /** Start OOB sequence - end */
}
/**