diff options
Diffstat (limited to 'drivers/scsi/aacraid/aacraid.h')
| -rw-r--r-- | drivers/scsi/aacraid/aacraid.h | 335 |
1 files changed, 174 insertions, 161 deletions
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 9abba8b90f70..3195d29f2177 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -1,4 +1,4 @@ -#if (!defined(dprintk)) +#ifndef dprintk # define dprintk(x) #endif /* eg: if (nblank(dprintk(x))) */ @@ -12,7 +12,7 @@ *----------------------------------------------------------------------------*/ #ifndef AAC_DRIVER_BUILD -# define AAC_DRIVER_BUILD 2449 +# define AAC_DRIVER_BUILD 2455 # define AAC_DRIVER_BRANCH "-ms" #endif #define MAXIMUM_NUM_CONTAINERS 32 @@ -50,9 +50,9 @@ struct diskparm /* * Firmware constants */ - + #define CT_NONE 0 -#define CT_OK 218 +#define CT_OK 218 #define FT_FILESYS 8 /* ADAPTEC's "FSA"(tm) filesystem */ #define FT_DRIVE 9 /* physical disk - addressable in scsi by bus/id/lun */ @@ -107,12 +107,12 @@ struct user_sgentryraw { struct sgmap { __le32 count; - struct sgentry sg[1]; + struct sgentry sg[1]; }; struct user_sgmap { u32 count; - struct user_sgentry sg[1]; + struct user_sgentry sg[1]; }; struct sgmap64 { @@ -137,18 +137,18 @@ struct user_sgmapraw { struct creation_info { - u8 buildnum; /* e.g., 588 */ - u8 usec; /* e.g., 588 */ - u8 via; /* e.g., 1 = FSU, - * 2 = API + u8 buildnum; /* e.g., 588 */ + u8 usec; /* e.g., 588 */ + u8 via; /* e.g., 1 = FSU, + * 2 = API */ - u8 year; /* e.g., 1997 = 97 */ + u8 year; /* e.g., 1997 = 97 */ __le32 date; /* - * unsigned Month :4; // 1 - 12 - * unsigned Day :6; // 1 - 32 - * unsigned Hour :6; // 0 - 23 - * unsigned Minute :6; // 0 - 60 - * unsigned Second :6; // 0 - 60 + * unsigned Month :4; // 1 - 12 + * unsigned Day :6; // 1 - 32 + * unsigned Hour :6; // 0 - 23 + * unsigned Minute :6; // 0 - 60 + * unsigned Second :6; // 0 - 60 */ __le32 serial[2]; /* e.g., 0x1DEADB0BFAFAF001 */ }; @@ -184,7 +184,7 @@ struct creation_info /* * Set the queues on a 16 byte alignment */ - + #define QUEUE_ALIGNMENT 16 /* @@ -203,9 +203,9 @@ struct aac_entry { * The adapter assumes the ProducerIndex and ConsumerIndex are grouped * adjacently and in that order. */ - + struct aac_qhdr { - __le64 header_addr;/* Address to hand the adapter to access + __le64 header_addr;/* Address to hand the adapter to access to this queue head */ __le32 *producer; /* The producer index for this queue (host address) */ __le32 *consumer; /* The consumer index for this queue (host address) */ @@ -215,7 +215,7 @@ struct aac_qhdr { * Define all the events which the adapter would like to notify * the host of. */ - + #define HostNormCmdQue 1 /* Change in host normal priority command queue */ #define HostHighCmdQue 2 /* Change in host high priority command queue */ #define HostNormRespQue 3 /* Change in host normal priority response queue */ @@ -286,17 +286,17 @@ struct aac_fibhdr { u8 StructType; /* Type FIB */ u8 Flags; /* Flags for FIB */ __le16 Size; /* Size of this FIB in bytes */ - __le16 SenderSize; /* Size of the FIB in the sender + __le16 SenderSize; /* Size of the FIB in the sender (for response sizing) */ __le32 SenderFibAddress; /* Host defined data in the FIB */ - __le32 ReceiverFibAddress;/* Logical address of this FIB for + __le32 ReceiverFibAddress;/* Logical address of this FIB for the adapter */ u32 SenderData; /* Place holder for the sender to store data */ union { struct { - __le32 _ReceiverTimeStart; /* Timestamp for + __le32 _ReceiverTimeStart; /* Timestamp for receipt of fib */ - __le32 _ReceiverTimeDone; /* Timestamp for + __le32 _ReceiverTimeDone; /* Timestamp for completion of fib */ } _s; } _u; @@ -311,7 +311,7 @@ struct hw_fib { * FIB commands */ -#define TestCommandResponse 1 +#define TestCommandResponse 1 #define TestAdapterCommand 2 /* * Lowlevel and comm commands @@ -350,10 +350,6 @@ struct hw_fib { #define ContainerCommand64 501 #define ContainerRawIo 502 /* - * Cluster Commands - */ -#define ClusterCommand 550 -/* * Scsi Port commands (scsi passthrough) */ #define ScsiPortCommand 600 @@ -375,19 +371,19 @@ struct hw_fib { */ enum fib_xfer_state { - HostOwned = (1<<0), - AdapterOwned = (1<<1), - FibInitialized = (1<<2), - FibEmpty = (1<<3), - AllocatedFromPool = (1<<4), - SentFromHost = (1<<5), - SentFromAdapter = (1<<6), - ResponseExpected = (1<<7), - NoResponseExpected = (1<<8), - AdapterProcessed = (1<<9), - HostProcessed = (1<<10), - HighPriority = (1<<11), - NormalPriority = (1<<12), + HostOwned = (1<<0), + AdapterOwned = (1<<1), + FibInitialized = (1<<2), + FibEmpty = (1<<3), + AllocatedFromPool = (1<<4), + SentFromHost = (1<<5), + SentFromAdapter = (1<<6), + ResponseExpected = (1<<7), + NoResponseExpected = (1<<8), + AdapterProcessed = (1<<9), + HostProcessed = (1<<10), + HighPriority = (1<<11), + NormalPriority = (1<<12), Async = (1<<13), AsyncIo = (1<<13), // rpbfix: remove with new regime PageFileIo = (1<<14), // rpbfix: remove with new regime @@ -420,7 +416,7 @@ struct aac_init __le32 AdapterFibAlign; __le32 printfbuf; __le32 printfbufsiz; - __le32 HostPhysMemPages; /* number of 4k pages of host + __le32 HostPhysMemPages; /* number of 4k pages of host physical memory */ __le32 HostElapsedSeconds; /* number of seconds since 1970. */ /* @@ -481,7 +477,7 @@ struct adapter_ops struct aac_driver_ident { - int (*init)(struct aac_dev *dev); + int (*init)(struct aac_dev *dev); char * name; char * vname; char * model; @@ -489,7 +485,7 @@ struct aac_driver_ident int quirks; }; /* - * Some adapter firmware needs communication memory + * Some adapter firmware needs communication memory * below 2gig. This tells the init function to set the * dma mask such that fib memory will be allocated where the * adapter firmware can get to it. @@ -521,33 +517,39 @@ struct aac_driver_ident #define AAC_QUIRK_17SG 0x0010 /* + * Some adapter firmware does not support 64 bit scsi passthrough + * commands. + */ +#define AAC_QUIRK_SCSI_32 0x0020 + +/* * The adapter interface specs all queues to be located in the same * physically contigous block. The host structure that defines the * commuication queues will assume they are each a separate physically * contigous memory region that will support them all being one big - * contigous block. + * contigous block. * There is a command and response queue for each level and direction of * commuication. These regions are accessed by both the host and adapter. */ - + struct aac_queue { - u64 logical; /*address we give the adapter */ + u64 logical; /*address we give the adapter */ struct aac_entry *base; /*system virtual address */ - struct aac_qhdr headers; /*producer,consumer q headers*/ - u32 entries; /*Number of queue entries */ + struct aac_qhdr headers; /*producer,consumer q headers*/ + u32 entries; /*Number of queue entries */ wait_queue_head_t qfull; /*Event to wait on if q full */ wait_queue_head_t cmdready; /*Cmd ready from the adapter */ - /* This is only valid for adapter to host command queues. */ - spinlock_t *lock; /* Spinlock for this queue must take this lock before accessing the lock */ + /* This is only valid for adapter to host command queues. */ + spinlock_t *lock; /* Spinlock for this queue must take this lock before accessing the lock */ spinlock_t lockdata; /* Actual lock (used only on one side of the lock) */ - struct list_head cmdq; /* A queue of FIBs which need to be prcessed by the FS thread. This is */ - /* only valid for command queues which receive entries from the adapter. */ + struct list_head cmdq; /* A queue of FIBs which need to be prcessed by the FS thread. This is */ + /* only valid for command queues which receive entries from the adapter. */ u32 numpending; /* Number of entries on outstanding queue. */ struct aac_dev * dev; /* Back pointer to adapter structure */ }; /* - * Message queues. The order here is important, see also the + * Message queues. The order here is important, see also the * queue type ordering */ @@ -559,12 +561,12 @@ struct aac_queue_block /* * SaP1 Message Unit Registers */ - + struct sa_drawbridge_CSR { - /* Offset | Name */ + /* Offset | Name */ __le32 reserved[10]; /* 00h-27h | Reserved */ u8 LUT_Offset; /* 28h | Lookup Table Offset */ - u8 reserved1[3]; /* 29h-2bh | Reserved */ + u8 reserved1[3]; /* 29h-2bh | Reserved */ __le32 LUT_Data; /* 2ch | Looup Table Data */ __le32 reserved2[26]; /* 30h-97h | Reserved */ __le16 PRICLEARIRQ; /* 98h | Primary Clear Irq */ @@ -583,8 +585,8 @@ struct sa_drawbridge_CSR { __le32 MAILBOX5; /* bch | Scratchpad 5 */ __le32 MAILBOX6; /* c0h | Scratchpad 6 */ __le32 MAILBOX7; /* c4h | Scratchpad 7 */ - __le32 ROM_Setup_Data; /* c8h | Rom Setup and Data */ - __le32 ROM_Control_Addr;/* cch | Rom Control and Address */ + __le32 ROM_Setup_Data; /* c8h | Rom Setup and Data */ + __le32 ROM_Control_Addr;/* cch | Rom Control and Address */ __le32 reserved3[12]; /* d0h-ffh | reserved */ __le32 LUT[64]; /* 100h-1ffh | Lookup Table Entries */ }; @@ -597,7 +599,7 @@ struct sa_drawbridge_CSR { #define Mailbox5 SaDbCSR.MAILBOX5 #define Mailbox6 SaDbCSR.MAILBOX6 #define Mailbox7 SaDbCSR.MAILBOX7 - + #define DoorbellReg_p SaDbCSR.PRISETIRQ #define DoorbellReg_s SaDbCSR.SECSETIRQ #define DoorbellClrReg_p SaDbCSR.PRICLEARIRQ @@ -611,19 +613,19 @@ struct sa_drawbridge_CSR { #define DOORBELL_5 0x0020 #define DOORBELL_6 0x0040 - + #define PrintfReady DOORBELL_5 #define PrintfDone DOORBELL_5 - + struct sa_registers { struct sa_drawbridge_CSR SaDbCSR; /* 98h - c4h */ }; - + #define Sa_MINIPORT_REVISION 1 #define sa_readw(AEP, CSR) readl(&((AEP)->regs.sa->CSR)) -#define sa_readl(AEP, CSR) readl(&((AEP)->regs.sa->CSR)) +#define sa_readl(AEP, CSR) readl(&((AEP)->regs.sa->CSR)) #define sa_writew(AEP, CSR, value) writew(value, &((AEP)->regs.sa->CSR)) #define sa_writel(AEP, CSR, value) writel(value, &((AEP)->regs.sa->CSR)) @@ -640,21 +642,21 @@ struct rx_mu_registers { __le32 IMRx[2]; /* 1310h | 10h | Inbound Message Registers */ __le32 OMRx[2]; /* 1318h | 18h | Outbound Message Registers */ __le32 IDR; /* 1320h | 20h | Inbound Doorbell Register */ - __le32 IISR; /* 1324h | 24h | Inbound Interrupt + __le32 IISR; /* 1324h | 24h | Inbound Interrupt Status Register */ - __le32 IIMR; /* 1328h | 28h | Inbound Interrupt - Mask Register */ + __le32 IIMR; /* 1328h | 28h | Inbound Interrupt + Mask Register */ __le32 ODR; /* 132Ch | 2Ch | Outbound Doorbell Register */ - __le32 OISR; /* 1330h | 30h | Outbound Interrupt + __le32 OISR; /* 1330h | 30h | Outbound Interrupt Status Register */ - __le32 OIMR; /* 1334h | 34h | Outbound Interrupt + __le32 OIMR; /* 1334h | 34h | Outbound Interrupt Mask Register */ __le32 reserved2; /* 1338h | 38h | Reserved */ __le32 reserved3; /* 133Ch | 3Ch | Reserved */ __le32 InboundQueue;/* 1340h | 40h | Inbound Queue Port relative to firmware */ __le32 OutboundQueue;/*1344h | 44h | Outbound Queue Port relative to firmware */ - /* * Must access through ATU Inbound - Translation Window */ + /* * Must access through ATU Inbound + Translation Window */ }; struct rx_inbound { @@ -710,12 +712,12 @@ struct rkt_registers { typedef void (*fib_callback)(void *ctxt, struct fib *fibctx); struct aac_fib_context { - s16 type; // used for verification of structure - s16 size; + s16 type; // used for verification of structure + s16 size; u32 unique; // unique value representing this context ulong jiffies; // used for cleanup - dmb changed to ulong struct list_head next; // used to link context's into a linked list - struct semaphore wait_sem; // this is used to wait for the next fib to arrive. + struct semaphore wait_sem; // this is used to wait for the next fib to arrive. int wait; // Set to true when thread is in WaitForSingleObject unsigned long count; // total number of FIBs on FibList struct list_head fib_list; // this holds fibs and their attachd hw_fibs @@ -734,9 +736,9 @@ struct sense_data { u8 EOM:1; /* End Of Medium - reserved for random access devices */ u8 filemark:1; /* Filemark - reserved for random access devices */ - u8 information[4]; /* for direct-access devices, contains the unsigned - * logical block address or residue associated with - * the sense key + u8 information[4]; /* for direct-access devices, contains the unsigned + * logical block address or residue associated with + * the sense key */ u8 add_sense_len; /* number of additional sense bytes to follow this field */ u8 cmnd_info[4]; /* not used */ @@ -746,7 +748,7 @@ struct sense_data { u8 bit_ptr:3; /* indicates which byte of the CDB or parameter data * was in error */ - u8 BPV:1; /* bit pointer valid (BPV): 1- indicates that + u8 BPV:1; /* bit pointer valid (BPV): 1- indicates that * the bit_ptr field has valid value */ u8 reserved2:2; @@ -780,24 +782,24 @@ struct fib { /* * The Adapter that this I/O is destined for. */ - struct aac_dev *dev; + struct aac_dev *dev; /* * This is the event the sendfib routine will wait on if the * caller did not pass one and this is synch io. */ - struct semaphore event_wait; + struct semaphore event_wait; spinlock_t event_lock; u32 done; /* gets set to 1 when fib is complete */ - fib_callback callback; - void *callback_data; + fib_callback callback; + void *callback_data; u32 flags; // u32 dmb was ulong /* * And for the internal issue/reply queues (we may be able * to merge these two) */ struct list_head fiblink; - void *data; + void *data; struct hw_fib *hw_fib_va; /* Actual shared object */ dma_addr_t hw_fib_pa; /* physical address of hw_fib*/ }; @@ -807,7 +809,7 @@ struct fib { * * This is returned by the RequestAdapterInfo block */ - + struct aac_adapter_info { __le32 platform; @@ -826,7 +828,7 @@ struct aac_adapter_info __le32 biosrev; __le32 biosbuild; __le32 cluster; - __le32 clusterchannelmask; + __le32 clusterchannelmask; __le32 serial[2]; __le32 battery; __le32 options; @@ -863,9 +865,10 @@ struct aac_supplement_adapter_info __le32 SupportedOptions2; __le32 ReservedGrowth[1]; }; -#define AAC_FEATURE_FALCON 0x00000010 -#define AAC_OPTION_MU_RESET 0x00000001 -#define AAC_OPTION_IGNORE_RESET 0x00000002 +#define AAC_FEATURE_FALCON cpu_to_le32(0x00000010) +#define AAC_FEATURE_JBOD cpu_to_le32(0x08000000) +#define AAC_OPTION_MU_RESET cpu_to_le32(0x00000001) +#define AAC_OPTION_IGNORE_RESET cpu_to_le32(0x00000002) #define AAC_SIS_VERSION_V3 3 #define AAC_SIS_SLOT_UNKNOWN 0xFF @@ -916,13 +919,13 @@ struct aac_bus_info_response { #define AAC_OPT_HOST_TIME_FIB cpu_to_le32(1<<4) #define AAC_OPT_RAID50 cpu_to_le32(1<<5) #define AAC_OPT_4GB_WINDOW cpu_to_le32(1<<6) -#define AAC_OPT_SCSI_UPGRADEABLE cpu_to_le32(1<<7) +#define AAC_OPT_SCSI_UPGRADEABLE cpu_to_le32(1<<7) #define AAC_OPT_SOFT_ERR_REPORT cpu_to_le32(1<<8) -#define AAC_OPT_SUPPORTED_RECONDITION cpu_to_le32(1<<9) +#define AAC_OPT_SUPPORTED_RECONDITION cpu_to_le32(1<<9) #define AAC_OPT_SGMAP_HOST64 cpu_to_le32(1<<10) #define AAC_OPT_ALARM cpu_to_le32(1<<11) #define AAC_OPT_NONDASD cpu_to_le32(1<<12) -#define AAC_OPT_SCSI_MANAGED cpu_to_le32(1<<13) +#define AAC_OPT_SCSI_MANAGED cpu_to_le32(1<<13) #define AAC_OPT_RAID_SCSI_MODE cpu_to_le32(1<<14) #define AAC_OPT_SUPPLEMENT_ADAPTER_INFO cpu_to_le32(1<<16) #define AAC_OPT_NEW_COMM cpu_to_le32(1<<17) @@ -942,7 +945,7 @@ struct aac_dev /* * Map for 128 fib objects (64k) - */ + */ dma_addr_t hw_fib_pa; struct hw_fib *hw_fib_va; struct hw_fib *aif_base_va; @@ -953,24 +956,24 @@ struct aac_dev struct fib *free_fib; spinlock_t fib_lock; - + struct aac_queue_block *queues; /* * The user API will use an IOCTL to register itself to receive * FIBs from the adapter. The following list is used to keep * track of all the threads that have requested these FIBs. The - * mutex is used to synchronize access to all data associated + * mutex is used to synchronize access to all data associated * with the adapter fibs. */ struct list_head fib_list; struct adapter_ops a_ops; unsigned long fsrev; /* Main driver's revision number */ - + unsigned base_size; /* Size of mapped in region */ struct aac_init *init; /* Holds initialization info to communicate with adapter */ - dma_addr_t init_pa; /* Holds physical address of the init struct */ - + dma_addr_t init_pa; /* Holds physical address of the init struct */ + struct pci_dev *pdev; /* Our PCI interface */ void * printfbuf; /* pointer to buffer used for printf's from the adapter */ void * comm_addr; /* Base address of Comm area */ @@ -984,11 +987,11 @@ struct aac_dev struct fsa_dev_info *fsa_dev; struct task_struct *thread; int cardtype; - + /* * The following is the device specific extension. */ -#if (!defined(AAC_MIN_FOOTPRINT_SIZE)) +#ifndef AAC_MIN_FOOTPRINT_SIZE # define AAC_MIN_FOOTPRINT_SIZE 8192 #endif union @@ -1009,7 +1012,9 @@ struct aac_dev /* These are in adapter info but they are in the io flow so * lets break them out so we don't have to do an AND to check them */ - u8 nondasd_support; + u8 nondasd_support; + u8 jbod; + u8 cache_protected; u8 dac_support; u8 raid_scsi_mode; u8 comm_interface; @@ -1066,18 +1071,19 @@ struct aac_dev (dev)->a_ops.adapter_comm(dev, comm) #define FIB_CONTEXT_FLAG_TIMED_OUT (0x00000001) +#define FIB_CONTEXT_FLAG (0x00000002) /* * Define the command values */ - + #define Null 0 -#define GetAttributes 1 -#define SetAttributes 2 -#define Lookup 3 -#define ReadLink 4 -#define Read 5 -#define Write 6 +#define GetAttributes 1 +#define SetAttributes 2 +#define Lookup 3 +#define ReadLink 4 +#define Read 5 +#define Write 6 #define Create 7 #define MakeDirectory 8 #define SymbolicLink 9 @@ -1173,19 +1179,19 @@ struct aac_dev struct aac_read { - __le32 command; - __le32 cid; - __le32 block; - __le32 count; + __le32 command; + __le32 cid; + __le32 block; + __le32 count; struct sgmap sg; // Must be last in struct because it is variable }; struct aac_read64 { - __le32 command; - __le16 cid; - __le16 sector_count; - __le32 block; + __le32 command; + __le16 cid; + __le16 sector_count; + __le32 block; __le16 pad; __le16 flags; struct sgmap64 sg; // Must be last in struct because it is variable @@ -1193,26 +1199,26 @@ struct aac_read64 struct aac_read_reply { - __le32 status; - __le32 count; + __le32 status; + __le32 count; }; struct aac_write { __le32 command; - __le32 cid; - __le32 block; - __le32 count; - __le32 stable; // Not used + __le32 cid; + __le32 block; + __le32 count; + __le32 stable; // Not used struct sgmap sg; // Must be last in struct because it is variable }; struct aac_write64 { - __le32 command; - __le16 cid; - __le16 sector_count; - __le32 block; + __le32 command; + __le16 cid; + __le16 sector_count; + __le32 block; __le16 pad; __le16 flags; #define IO_TYPE_WRITE 0x00000000 @@ -1223,7 +1229,7 @@ struct aac_write64 struct aac_write_reply { __le32 status; - __le32 count; + __le32 count; __le32 committed; }; @@ -1326,10 +1332,10 @@ struct aac_srb_reply #define SRB_NoDataXfer 0x0000 #define SRB_DisableDisconnect 0x0004 #define SRB_DisableSynchTransfer 0x0008 -#define SRB_BypassFrozenQueue 0x0010 +#define SRB_BypassFrozenQueue 0x0010 #define SRB_DisableAutosense 0x0020 #define SRB_DataIn 0x0040 -#define SRB_DataOut 0x0080 +#define SRB_DataOut 0x0080 /* * SRB Functions - set in aac_srb->function @@ -1352,7 +1358,7 @@ struct aac_srb_reply #define SRBF_RemoveDevice 0x0016 #define SRBF_DomainValidation 0x0017 -/* +/* * SRB SCSI Status - set in aac_srb->scsi_status */ #define SRB_STATUS_PENDING 0x00 @@ -1511,17 +1517,17 @@ struct aac_get_container_count_resp { */ struct aac_mntent { - __le32 oid; + __le32 oid; u8 name[16]; /* if applicable */ struct creation_info create_info; /* if applicable */ __le32 capacity; - __le32 vol; /* substrate structure */ - __le32 obj; /* FT_FILESYS, etc. */ - __le32 state; /* unready for mounting, + __le32 vol; /* substrate structure */ + __le32 obj; /* FT_FILESYS, etc. */ + __le32 state; /* unready for mounting, readonly, etc. */ - union aac_contentinfo fileinfo; /* Info specific to content + union aac_contentinfo fileinfo; /* Info specific to content manager (eg, filesystem) */ - __le32 altoid; /* != oid <==> snapshot or + __le32 altoid; /* != oid <==> snapshot or broken mirror exists */ __le32 capacityhigh; }; @@ -1538,7 +1544,7 @@ struct aac_query_mount { struct aac_mount { __le32 status; - __le32 type; /* should be same as that requested */ + __le32 type; /* should be same as that requested */ __le32 count; struct aac_mntent mnt[1]; }; @@ -1608,7 +1614,7 @@ struct aac_delete_disk { u32 disknum; u32 cnum; }; - + struct fib_ioctl { u32 fibctx; @@ -1622,10 +1628,10 @@ struct revision __le32 version; __le32 build; }; - + /* - * Ugly - non Linux like ioctl coding for back compat. + * Ugly - non Linux like ioctl coding for back compat. */ #define CTL_CODE(function, method) ( \ @@ -1633,7 +1639,7 @@ struct revision ) /* - * Define the method codes for how buffers are passed for I/O and FS + * Define the method codes for how buffers are passed for I/O and FS * controls */ @@ -1644,15 +1650,15 @@ struct revision * Filesystem ioctls */ -#define FSACTL_SENDFIB CTL_CODE(2050, METHOD_BUFFERED) -#define FSACTL_SEND_RAW_SRB CTL_CODE(2067, METHOD_BUFFERED) +#define FSACTL_SENDFIB CTL_CODE(2050, METHOD_BUFFERED) +#define FSACTL_SEND_RAW_SRB CTL_CODE(2067, METHOD_BUFFERED) #define FSACTL_DELETE_DISK 0x163 #define FSACTL_QUERY_DISK 0x173 #define FSACTL_OPEN_GET_ADAPTER_FIB CTL_CODE(2100, METHOD_BUFFERED) #define FSACTL_GET_NEXT_ADAPTER_FIB CTL_CODE(2101, METHOD_BUFFERED) #define FSACTL_CLOSE_GET_ADAPTER_FIB CTL_CODE(2102, METHOD_BUFFERED) #define FSACTL_MINIPORT_REV_CHECK CTL_CODE(2107, METHOD_BUFFERED) -#define FSACTL_GET_PCI_INFO CTL_CODE(2119, METHOD_BUFFERED) +#define FSACTL_GET_PCI_INFO CTL_CODE(2119, METHOD_BUFFERED) #define FSACTL_FORCE_DELETE_DISK CTL_CODE(2120, METHOD_NEITHER) #define FSACTL_GET_CONTAINERS 2131 #define FSACTL_SEND_LARGE_FIB CTL_CODE(2138, METHOD_BUFFERED) @@ -1661,7 +1667,7 @@ struct revision struct aac_common { /* - * If this value is set to 1 then interrupt moderation will occur + * If this value is set to 1 then interrupt moderation will occur * in the base commuication support. */ u32 irq_mod; @@ -1690,11 +1696,11 @@ extern struct aac_common aac_config; * The following macro is used when sending and receiving FIBs. It is * only used for debugging. */ - + #ifdef DBG #define FIB_COUNTER_INCREMENT(counter) (counter)++ #else -#define FIB_COUNTER_INCREMENT(counter) +#define FIB_COUNTER_INCREMENT(counter) #endif /* @@ -1726,17 +1732,17 @@ extern struct aac_common aac_config; * * The adapter reports is present state through the phase. Only * a single phase should be ever be set. Each phase can have multiple - * phase status bits to provide more detailed information about the - * state of the board. Care should be taken to ensure that any phase + * phase status bits to provide more detailed information about the + * state of the board. Care should be taken to ensure that any phase * status bits that are set when changing the phase are also valid * for the new phase or be cleared out. Adapter software (monitor, - * iflash, kernel) is responsible for properly maintining the phase + * iflash, kernel) is responsible for properly maintining the phase * status mailbox when it is running. - * - * MONKER_API Phases * - * Phases are bit oriented. It is NOT valid to have multiple bits set - */ + * MONKER_API Phases + * + * Phases are bit oriented. It is NOT valid to have multiple bits set + */ #define SELF_TEST_FAILED 0x00000004 #define MONITOR_PANIC 0x00000020 @@ -1759,16 +1765,22 @@ extern struct aac_common aac_config; * For FIB communication, we need all of the following things * to send back to the user. */ - -#define AifCmdEventNotify 1 /* Notify of event */ + +#define AifCmdEventNotify 1 /* Notify of event */ #define AifEnConfigChange 3 /* Adapter configuration change */ #define AifEnContainerChange 4 /* Container configuration change */ #define AifEnDeviceFailure 5 /* SCSI device failed */ +#define AifEnEnclosureManagement 13 /* EM_DRIVE_* */ +#define EM_DRIVE_INSERTION 31 +#define EM_DRIVE_REMOVAL 32 +#define AifEnBatteryEvent 14 /* Change in Battery State */ #define AifEnAddContainer 15 /* A new array was created */ #define AifEnDeleteContainer 16 /* A container was deleted */ #define AifEnExpEvent 23 /* Firmware Event Log */ #define AifExeFirmwarePanic 3 /* Firmware Event Panic */ #define AifHighPriority 3 /* Highest Priority Event */ +#define AifEnAddJBOD 30 /* JBOD created */ +#define AifEnDeleteJBOD 31 /* JBOD deleted */ #define AifCmdJobProgress 2 /* Progress report */ #define AifJobCtrZero 101 /* Array Zero progress */ @@ -1780,11 +1792,11 @@ extern struct aac_common aac_config; #define AifDenVolumeExtendComplete 201 /* A volume extend completed */ #define AifReqJobList 100 /* Gets back complete job list */ #define AifReqJobsForCtr 101 /* Gets back jobs for specific container */ -#define AifReqJobsForScsi 102 /* Gets back jobs for specific SCSI device */ -#define AifReqJobReport 103 /* Gets back a specific job report or list of them */ +#define AifReqJobsForScsi 102 /* Gets back jobs for specific SCSI device */ +#define AifReqJobReport 103 /* Gets back a specific job report or list of them */ #define AifReqTerminateJob 104 /* Terminates job */ #define AifReqSuspendJob 105 /* Suspends a job */ -#define AifReqResumeJob 106 /* Resumes a job */ +#define AifReqResumeJob 106 /* Resumes a job */ #define AifReqSendAPIReport 107 /* API generic report requests */ #define AifReqAPIJobStart 108 /* Start a job from the API */ #define AifReqAPIJobUpdate 109 /* Update a job report from the API */ @@ -1803,8 +1815,8 @@ struct aac_aifcmd { }; /** - * Convert capacity to cylinders - * accounting for the fact capacity could be a 64 bit value + * Convert capacity to cylinders + * accounting for the fact capacity could be a 64 bit value * */ static inline unsigned int cap_to_cyls(sector_t capacity, unsigned divisor) @@ -1861,6 +1873,7 @@ int aac_probe_container(struct aac_dev *dev, int cid); int _aac_rx_init(struct aac_dev *dev); int aac_rx_select_comm(struct aac_dev *dev, int comm); int aac_rx_deliver_producer(struct fib * fib); +char * get_container_type(unsigned type); extern int numacb; extern int acbsize; extern char aac_driver_version[]; |