summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/Kconfig')
-rw-r--r--drivers/scsi/Kconfig83
1 files changed, 0 insertions, 83 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 29684c8142b0..7a66d0e97dd3 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -807,19 +807,6 @@ config SCSI_FUTURE_DOMAIN
To compile this driver as a module, choose M here: the
module will be called fdomain.
-config SCSI_FD_MCS
- tristate "Future Domain MCS-600/700 SCSI support"
- depends on MCA_LEGACY && SCSI
- ---help---
- This is support for Future Domain MCS 600/700 MCA SCSI adapters.
- Some PS/2 computers are equipped with IBM Fast SCSI Adapter/A which
- is identical to the MCS 700 and hence also supported by this driver.
- This driver also supports the Reply SB16/SCSI card (the SCSI part).
- It supports multiple adapters in the same system.
-
- To compile this driver as a module, choose M here: the
- module will be called fd_mcs.
-
config SCSI_GDTH
tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
@@ -889,76 +876,6 @@ config SCSI_GENERIC_NCR53C400
not detect your card. See the file
<file:Documentation/scsi/g_NCR5380.txt> for details.
-config SCSI_IBMMCA
- tristate "IBMMCA SCSI support"
- depends on MCA && SCSI
- ---help---
- This is support for the IBM SCSI adapter found in many of the PS/2
- series computers. These machines have an MCA bus, so you need to
- answer Y to "MCA support" as well and read
- <file:Documentation/mca.txt>.
-
- If the adapter isn't found during boot (a common problem for models
- 56, 57, 76, and 77) you'll need to use the 'ibmmcascsi=<pun>' kernel
- option, where <pun> is the id of the SCSI subsystem (usually 7, but
- if that doesn't work check your reference diskette). Owners of
- model 95 with a LED-matrix-display can in addition activate some
- activity info like under OS/2, but more informative, by setting
- 'ibmmcascsi=display' as an additional kernel parameter. Try "man
- bootparam" or see the documentation of your boot loader about how to
- pass options to the kernel.
-
- To compile this driver as a module, choose M here: the
- module will be called ibmmca.
-
-config IBMMCA_SCSI_ORDER_STANDARD
- bool "Standard SCSI-order"
- depends on SCSI_IBMMCA
- ---help---
- In the PC-world and in most modern SCSI-BIOS-setups, SCSI-hard disks
- are assigned to the drive letters, starting with the lowest SCSI-id
- (physical number -- pun) to be drive C:, as seen from DOS and
- similar operating systems. When looking into papers describing the
- ANSI-SCSI-standard, this assignment of drives appears to be wrong.
- The SCSI-standard follows a hardware-hierarchy which says that id 7
- has the highest priority and id 0 the lowest. Therefore, the host
- adapters are still today everywhere placed as SCSI-id 7 by default.
- In the SCSI-standard, the drive letters express the priority of the
- disk. C: should be the hard disk, or a partition on it, with the
- highest priority. This must therefore be the disk with the highest
- SCSI-id (e.g. 6) and not the one with the lowest! IBM-BIOS kept the
- original definition of the SCSI-standard as also industrial- and
- process-control-machines, like VME-CPUs running under realtime-OSes
- (e.g. LynxOS, OS9) do.
-
- If you like to run Linux on your MCA-machine with the same
- assignment of hard disks as seen from e.g. DOS or OS/2 on your
- machine, which is in addition conformant to the SCSI-standard, you
- must say Y here. This is also necessary for MCA-Linux users who want
- to keep downward compatibility to older releases of the
- IBM-MCA-SCSI-driver (older than driver-release 2.00 and older than
- June 1997).
-
- If you like to have the lowest SCSI-id assigned as drive C:, as
- modern SCSI-BIOSes do, which does not conform to the standard, but
- is widespread and common in the PC-world of today, you must say N
- here. If unsure, say Y.
-
-config IBMMCA_SCSI_DEV_RESET
- bool "Reset SCSI-devices at boottime"
- depends on SCSI_IBMMCA
- ---help---
- By default, SCSI-devices are reset when the machine is powered on.
- However, some devices exist, like special-control-devices,
- SCSI-CNC-machines, SCSI-printer or scanners of older type, that do
- not reset when switched on. If you say Y here, each device connected
- to your SCSI-bus will be issued a reset-command after it has been
- probed, while the kernel is booting. This may cause problems with
- more modern devices, like hard disks, which do not appreciate these
- reset commands, and can cause your system to hang. So say Y only if
- you know that one of your older devices needs it; N is the safe
- answer.
-
config SCSI_IPS
tristate "IBM ServeRAID support"
depends on PCI && SCSI