diff options
Diffstat (limited to 'drivers/sbus/char/aurora.h')
| -rw-r--r-- | drivers/sbus/char/aurora.h | 276 |
1 files changed, 276 insertions, 0 deletions
diff --git a/drivers/sbus/char/aurora.h b/drivers/sbus/char/aurora.h new file mode 100644 index 000000000000..b8b5476d9860 --- /dev/null +++ b/drivers/sbus/char/aurora.h @@ -0,0 +1,276 @@ +/* $Id: aurora.h,v 1.6 2001/06/05 12:23:38 davem Exp $ + * linux/drivers/sbus/char/aurora.h -- Aurora multiport driver + * + * Copyright (c) 1999 by Oliver Aldulea (oli@bv.ro) + * + * This code is based on the RISCom/8 multiport serial driver written + * by Dmitry Gorodchanin (pgmdsg@ibi.com), based on the Linux serial + * driver, written by Linus Torvalds, Theodore T'so and others. + * The Aurora multiport programming info was obtained mainly from the + * Cirrus Logic CD180 documentation (available on the web), and by + * doing heavy tests on the board. Many thanks to Eddie C. Dost for the + * help on the sbus interface. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Revision 1.0 + * + * This is the first public release. + * + * This version needs a lot of feedback. This is the version that works + * with _my_ board. My board is model 1600se, revision '@(#)1600se.fth + * 1.2 3/28/95 1'. The driver might work with your board, but I do not + * guarantee it. If you have _any_ type of board, I need to know if the + * driver works or not, I need to know exactly your board parameters + * (get them with 'cd /proc/openprom/iommu/sbus/sio16/; ls *; cat *') + * Also, I need your board revision code, which is written on the board. + * Send me the output of my driver too (it outputs through klogd). + * + * If the driver does not work, you can try enabling the debug options + * to see what's wrong or what should be done. + * + * I'm sorry about the alignment of the code. It was written in a + * 128x48 environment. + * + * I must say that I do not like Aurora Technologies' policy. I asked + * them to help me do this driver faster, but they ended by something + * like "don't call us, we'll call you", and I never heard anything + * from them. They told me "knowing the way the board works, I don't + * doubt you and others on the net will make the driver." + * The truth about this board is that it has nothing intelligent on it. + * If you want to say to somebody what kind of board you have, say that + * it uses Cirrus Logic processors (CD180). The power of the board is + * in those two chips. The rest of the board is the interface to the + * sbus and to the peripherals. Still, they did something smart: they + * reversed DTR and RTS to make on-board automatic hardware flow + * control usable. + * Thanks to Aurora Technologies for wasting my time, nerves and money. + */ + +#ifndef __LINUX_AURORA_H +#define __LINUX_AURORA_H + +#include <linux/serial.h> +#include <linux/serialP.h> + +#ifdef __KERNEL__ + +/* This is the number of boards to support. I've only tested this driver with + * one board, so it might not work. + */ +#define AURORA_NBOARD 1 + +/* Useful ? Yes. But you can safely comment the warnings if they annoy you + * (let me say that again: the warnings in the code, not this define). + */ +#define AURORA_PARANOIA_CHECK + +/* Well, after many lost nights, I found that the IRQ for this board is + * selected from four built-in values by writing some bits in the + * configuration register. This causes a little problem to occur: which + * IRQ to select ? Which one is the best for the user ? Well, I finally + * decided for the following algorithm: if the "bintr" value is not acceptable + * (not within type_1_irq[], then test the "intr" value, if that fails too, + * try each value from type_1_irq until succeded. Hope it's ok. + * You can safely reorder the irq's. + */ +#define TYPE_1_IRQS 4 +unsigned char type_1_irq[TYPE_1_IRQS] = { + 3, 5, 9, 13 +}; +/* I know something about another method of interrupt setting, but not enough. + * Also, this is for another type of board, so I first have to learn how to + * detect it. +#define TYPE_2_IRQS 3 +unsigned char type_2_irq[TYPE_2_IRQS] = { + 0, 0, 0 ** could anyone find these for me ? (see AURORA_ALLIRQ below) ** + }; +unsigned char type_2_mask[TYPE_2_IRQS] = { + 32, 64, 128 + }; +*/ + +/* The following section should only be modified by those who know what + * they're doing (or don't, but want to help with some feedback). Modifying + * anything raises a _big_ probability for your system to hang, but the + * sacrifice worths. (I sacrificed my ext2fs many, many times...) + */ + +/* This one tries to dump to console the name of almost every function called, + * and many other debugging info. + */ +#undef AURORA_DEBUG + +/* These are the most dangerous and useful defines. They do printk() during + * the interrupt processing routine(s), so if you manage to get "flooded" by + * irq's, start thinking about the "Power off/on" button... + */ +#undef AURORA_INTNORM /* This one enables the "normal" messages, but some + * of them cause flood, so I preffered putting + * them under a define */ +#undef AURORA_INT_DEBUG /* This one is really bad. */ + +/* Here's something helpful: after n irq's, the board will be disabled. This + * prevents irq flooding during debug (no need to think about power + * off/on anymore...) + */ +#define AURORA_FLOODPRO 10 + +/* This one helps finding which irq the board calls, in case of a strange/ + * unsupported board. AURORA_INT_DEBUG should be enabled, because I don't + * think /proc/interrupts or any command will be available in case of an irq + * flood... "allirq" is the list of all free irq's. + */ +/* +#define AURORA_ALLIRQ 6 +int allirq[AURORA_ALLIRQ]={ + 2,3,5,7,9,13 + }; +*/ + +/* These must not be modified. These values are assumed during the code for + * performance optimisations. + */ +#define AURORA_NCD180 2 /* two chips per board */ +#define AURORA_NPORT 8 /* 8 ports per chip */ + +/* several utilities */ +#define AURORA_BOARD(line) (((line) >> 4) & 0x01) +#define AURORA_CD180(line) (((line) >> 3) & 0x01) +#define AURORA_PORT(line) ((line) & 15) + +#define AURORA_TNPORTS (AURORA_NBOARD*AURORA_NCD180*AURORA_NPORT) + +/* Ticks per sec. Used for setting receiver timeout and break length */ +#define AURORA_TPS 4000 + +#define AURORA_MAGIC 0x0A18 + +/* Yeah, after heavy testing I decided it must be 6. + * Sure, You can change it if needed. + */ +#define AURORA_RXFIFO 6 /* Max. receiver FIFO size (1-8) */ + +#define AURORA_RXTH 7 + +struct aurora_reg1 { + __volatile__ unsigned char r; +}; + +struct aurora_reg128 { + __volatile__ unsigned char r[128]; +}; + +struct aurora_reg4 { + __volatile__ unsigned char r[4]; +}; + +struct Aurora_board { + unsigned long flags; + struct aurora_reg1 * r0; /* This is the board configuration + * register (write-only). */ + struct aurora_reg128 * r[2]; /* These are the registers for the + * two chips. */ + struct aurora_reg4 * r3; /* These are used for hardware-based + * acknowledge. Software-based ack is + * not supported by CD180. */ + unsigned int oscfreq; /* The on-board oscillator + * frequency, in Hz. */ + unsigned char irq; +#ifdef MODULE + signed char count; /* counts the use of the board */ +#endif + /* Values for the dtr_rts swapped mode. */ + unsigned char DTR; + unsigned char RTS; + unsigned char MSVDTR; + unsigned char MSVRTS; + /* Values for hardware acknowledge. */ + unsigned char ACK_MINT, ACK_TINT, ACK_RINT; +}; + +/* Board configuration register */ +#define AURORA_CFG_ENABLE_IO 8 +#define AURORA_CFG_ENABLE_IRQ 4 + +/* Board flags */ +#define AURORA_BOARD_PRESENT 0x00000001 +#define AURORA_BOARD_ACTIVE 0x00000002 +#define AURORA_BOARD_TYPE_2 0x00000004 /* don't know how to + * detect this yet */ +#define AURORA_BOARD_DTR_FLOW_OK 0x00000008 + +/* The story goes like this: Cirrus programmed the CD-180 chip to do automatic + * hardware flow control, and do it using CTS and DTR. CTS is ok, but, if you + * have a modem and the chip drops DTR, then the modem will drop the carrier + * (ain't that cute...). Luckily, the guys at Aurora decided to swap DTR and + * RTS, which makes the flow control usable. I hope that all the boards made + * by Aurora have these two signals swapped. If your's doesn't but you have a + * breakout box, you can try to reverse them yourself, then set the following + * flag. + */ +#undef AURORA_FORCE_DTR_FLOW + +/* In fact, a few more words have to be said about hardware flow control. + * This driver handles "output" flow control through the on-board facility + * CTS Auto Enable. For the "input" flow control there are two cases when + * the flow should be controlled. The first case is when the kernel is so + * busy that it cannot process IRQ's in time; this flow control can only be + * activated by the on-board chip, and if the board has RTS and DTR swapped, + * this facility is usable. The second case is when the application is so + * busy that it cannot receive bytes from the kernel, and this flow must be + * activated by software. This second case is not yet implemented in this + * driver. Unfortunately, I estimate that the second case is the one that + * occurs the most. + */ + + +struct Aurora_port { + int magic; + int baud_base; + int flags; + struct tty_struct * tty; + int count; + int blocked_open; + long event; + int timeout; + int close_delay; + unsigned char * xmit_buf; + int custom_divisor; + int xmit_head; + int xmit_tail; + int xmit_cnt; + wait_queue_head_t open_wait; + wait_queue_head_t close_wait; + struct tq_struct tqueue; + struct tq_struct tqueue_hangup; + short wakeup_chars; + short break_length; + unsigned short closing_wait; + unsigned char mark_mask; + unsigned char SRER; + unsigned char MSVR; + unsigned char COR2; +#ifdef AURORA_REPORT_OVERRUN + unsigned long overrun; +#endif +#ifdef AURORA_REPORT_FIFO + unsigned long hits[10]; +#endif +}; + +#endif +#endif /*__LINUX_AURORA_H*/ + |