diff options
Diffstat (limited to 'drivers/s390/scsi/zfcp_fsf.c')
| -rw-r--r-- | drivers/s390/scsi/zfcp_fsf.c | 5087 |
1 files changed, 5087 insertions, 0 deletions
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c new file mode 100644 index 000000000000..578b9fbe5206 --- /dev/null +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -0,0 +1,5087 @@ +/* + * + * linux/drivers/s390/scsi/zfcp_fsf.c + * + * FCP adapter driver for IBM eServer zSeries + * + * (C) Copyright IBM Corp. 2002, 2004 + * + * Author(s): Martin Peschke <mpeschke@de.ibm.com> + * Raimund Schroeder <raimund.schroeder@de.ibm.com> + * Aron Zeh + * Wolfgang Taphorn + * Stefan Bader <stefan.bader@de.ibm.com> + * Heiko Carstens <heiko.carstens@de.ibm.com> + * Andreas Herrmann <aherrman@de.ibm.com> + * Volker Sameske <sameske@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#define ZFCP_FSF_C_REVISION "$Revision: 1.92 $" + +#include "zfcp_ext.h" + +static int zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *); +static void zfcp_fsf_exchange_port_data_handler(struct zfcp_fsf_req *); +static int zfcp_fsf_open_port_handler(struct zfcp_fsf_req *); +static int zfcp_fsf_close_port_handler(struct zfcp_fsf_req *); +static int zfcp_fsf_close_physical_port_handler(struct zfcp_fsf_req *); +static int zfcp_fsf_open_unit_handler(struct zfcp_fsf_req *); +static int zfcp_fsf_close_unit_handler(struct zfcp_fsf_req *); +static int zfcp_fsf_send_fcp_command_handler(struct zfcp_fsf_req *); +static int zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *); +static int zfcp_fsf_send_fcp_command_task_management_handler( + struct zfcp_fsf_req *); +static int zfcp_fsf_abort_fcp_command_handler(struct zfcp_fsf_req *); +static int zfcp_fsf_status_read_handler(struct zfcp_fsf_req *); +static int zfcp_fsf_send_ct_handler(struct zfcp_fsf_req *); +static int zfcp_fsf_send_els_handler(struct zfcp_fsf_req *); +static int zfcp_fsf_control_file_handler(struct zfcp_fsf_req *); +static inline int zfcp_fsf_req_sbal_check( + unsigned long *, struct zfcp_qdio_queue *, int); +static inline int zfcp_use_one_sbal( + struct scatterlist *, int, struct scatterlist *, int); +static struct zfcp_fsf_req *zfcp_fsf_req_alloc(mempool_t *, int); +static int zfcp_fsf_req_send(struct zfcp_fsf_req *, struct timer_list *); +static int zfcp_fsf_protstatus_eval(struct zfcp_fsf_req *); +static int zfcp_fsf_fsfstatus_eval(struct zfcp_fsf_req *); +static int zfcp_fsf_fsfstatus_qual_eval(struct zfcp_fsf_req *); +static int zfcp_fsf_req_dispatch(struct zfcp_fsf_req *); +static void zfcp_fsf_req_dismiss(struct zfcp_fsf_req *); +static void zfcp_fsf_req_free(struct zfcp_fsf_req *); + +/* association between FSF command and FSF QTCB type */ +static u32 fsf_qtcb_type[] = { + [FSF_QTCB_FCP_CMND] = FSF_IO_COMMAND, + [FSF_QTCB_ABORT_FCP_CMND] = FSF_SUPPORT_COMMAND, + [FSF_QTCB_OPEN_PORT_WITH_DID] = FSF_SUPPORT_COMMAND, + [FSF_QTCB_OPEN_LUN] = FSF_SUPPORT_COMMAND, + [FSF_QTCB_CLOSE_LUN] = FSF_SUPPORT_COMMAND, + [FSF_QTCB_CLOSE_PORT] = FSF_SUPPORT_COMMAND, + [FSF_QTCB_CLOSE_PHYSICAL_PORT] = FSF_SUPPORT_COMMAND, + [FSF_QTCB_SEND_ELS] = FSF_SUPPORT_COMMAND, + [FSF_QTCB_SEND_GENERIC] = FSF_SUPPORT_COMMAND, + [FSF_QTCB_EXCHANGE_CONFIG_DATA] = FSF_CONFIG_COMMAND, + [FSF_QTCB_EXCHANGE_PORT_DATA] = FSF_PORT_COMMAND, + [FSF_QTCB_DOWNLOAD_CONTROL_FILE] = FSF_SUPPORT_COMMAND, + [FSF_QTCB_UPLOAD_CONTROL_FILE] = FSF_SUPPORT_COMMAND +}; + +static const char zfcp_act_subtable_type[5][8] = { + "unknown", "OS", "WWPN", "DID", "LUN" +}; + +/****************************************************************/ +/*************** FSF related Functions *************************/ +/****************************************************************/ + +#define ZFCP_LOG_AREA ZFCP_LOG_AREA_FSF + +/* + * function: zfcp_fsf_req_alloc + * + * purpose: Obtains an fsf_req and potentially a qtcb (for all but + * unsolicited requests) via helper functions + * Does some initial fsf request set-up. + * + * returns: pointer to allocated fsf_req if successfull + * NULL otherwise + * + * locks: none + * + */ +static struct zfcp_fsf_req * +zfcp_fsf_req_alloc(mempool_t *pool, int req_flags) +{ + size_t size; + void *ptr; + struct zfcp_fsf_req *fsf_req = NULL; + + if (req_flags & ZFCP_REQ_NO_QTCB) + size = sizeof(struct zfcp_fsf_req); + else + size = sizeof(struct zfcp_fsf_req_pool_element); + + if (likely(pool != NULL)) + ptr = mempool_alloc(pool, GFP_ATOMIC); + else + ptr = kmalloc(size, GFP_ATOMIC); + + if (unlikely(NULL == ptr)) + goto out; + + memset(ptr, 0, size); + + if (req_flags & ZFCP_REQ_NO_QTCB) { + fsf_req = (struct zfcp_fsf_req *) ptr; + } else { + fsf_req = &((struct zfcp_fsf_req_pool_element *) ptr)->fsf_req; + fsf_req->qtcb = + &((struct zfcp_fsf_req_pool_element *) ptr)->qtcb; + } + + fsf_req->pool = pool; + + out: + return fsf_req; +} + +/* + * function: zfcp_fsf_req_free + * + * purpose: Frees the memory of an fsf_req (and potentially a qtcb) or + * returns it into the pool via helper functions. + * + * returns: sod all + * + * locks: none + */ +static void +zfcp_fsf_req_free(struct zfcp_fsf_req *fsf_req) +{ + if (likely(fsf_req->pool != NULL)) + mempool_free(fsf_req, fsf_req->pool); + else + kfree(fsf_req); +} + +/* + * function: + * + * purpose: + * + * returns: + * + * note: qdio queues shall be down (no ongoing inbound processing) + */ +int +zfcp_fsf_req_dismiss_all(struct zfcp_adapter *adapter) +{ + int retval = 0; + struct zfcp_fsf_req *fsf_req, *tmp; + + list_for_each_entry_safe(fsf_req, tmp, &adapter->fsf_req_list_head, + list) + zfcp_fsf_req_dismiss(fsf_req); + /* wait_event_timeout? */ + while (!list_empty(&adapter->fsf_req_list_head)) { + ZFCP_LOG_DEBUG("fsf req list of adapter %s not yet empty\n", + zfcp_get_busid_by_adapter(adapter)); + /* wait for woken intiators to clean up their requests */ + msleep(jiffies_to_msecs(ZFCP_FSFREQ_CLEANUP_TIMEOUT)); + } + + /* consistency check */ + if (atomic_read(&adapter->fsf_reqs_active)) { + ZFCP_LOG_NORMAL("bug: There are still %d FSF requests pending " + "on adapter %s after cleanup.\n", + atomic_read(&adapter->fsf_reqs_active), + zfcp_get_busid_by_adapter(adapter)); + atomic_set(&adapter->fsf_reqs_active, 0); + } + + return retval; +} + +/* + * function: + * + * purpose: + * + * returns: + */ +static void +zfcp_fsf_req_dismiss(struct zfcp_fsf_req *fsf_req) +{ + fsf_req->status |= ZFCP_STATUS_FSFREQ_DISMISSED; + zfcp_fsf_req_complete(fsf_req); +} + +/* + * function: zfcp_fsf_req_complete + * + * purpose: Updates active counts and timers for openfcp-reqs + * May cleanup request after req_eval returns + * + * returns: 0 - success + * !0 - failure + * + * context: + */ +int +zfcp_fsf_req_complete(struct zfcp_fsf_req *fsf_req) +{ + int retval = 0; + int cleanup; + struct zfcp_adapter *adapter = fsf_req->adapter; + + /* do some statistics */ + atomic_dec(&adapter->fsf_reqs_active); + + if (unlikely(fsf_req->fsf_command == FSF_QTCB_UNSOLICITED_STATUS)) { + ZFCP_LOG_DEBUG("Status read response received\n"); + /* + * Note: all cleanup handling is done in the callchain of + * the function call-chain below. + */ + zfcp_fsf_status_read_handler(fsf_req); + goto out; + } else + zfcp_fsf_protstatus_eval(fsf_req); + + /* + * fsf_req may be deleted due to waking up functions, so + * cleanup is saved here and used later + */ + if (likely(fsf_req->status & ZFCP_STATUS_FSFREQ_CLEANUP)) + cleanup = 1; + else + cleanup = 0; + + fsf_req->status |= ZFCP_STATUS_FSFREQ_COMPLETED; + + /* cleanup request if requested by initiator */ + if (likely(cleanup)) { + ZFCP_LOG_TRACE("removing FSF request %p\n", fsf_req); + /* + * lock must not be held here since it will be + * grabed by the called routine, too + */ + zfcp_fsf_req_cleanup(fsf_req); + } else { + /* notify initiator waiting for the requests completion */ + ZFCP_LOG_TRACE("waking initiator of FSF request %p\n",fsf_req); + /* + * FIXME: Race! We must not access fsf_req here as it might have been + * cleaned up already due to the set ZFCP_STATUS_FSFREQ_COMPLETED + * flag. It's an improbable case. But, we have the same paranoia for + * the cleanup flag already. + * Might better be handled using complete()? + * (setting the flag and doing wakeup ought to be atomic + * with regard to checking the flag as long as waitqueue is + * part of the to be released structure) + */ + wake_up(&fsf_req->completion_wq); + } + + out: + return retval; +} + +/* + * function: zfcp_fsf_protstatus_eval + * + * purpose: evaluates the QTCB of the finished FSF request + * and initiates appropriate actions + * (usually calling FSF command specific handlers) + * + * returns: + * + * context: + * + * locks: + */ +static int +zfcp_fsf_protstatus_eval(struct zfcp_fsf_req *fsf_req) +{ + int retval = 0; + struct zfcp_adapter *adapter = fsf_req->adapter; + + ZFCP_LOG_DEBUG("QTCB is at %p\n", fsf_req->qtcb); + + if (fsf_req->status & ZFCP_STATUS_FSFREQ_DISMISSED) { + ZFCP_LOG_DEBUG("fsf_req 0x%lx has been dismissed\n", + (unsigned long) fsf_req); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR | + ZFCP_STATUS_FSFREQ_RETRY; /* only for SCSI cmnds. */ + zfcp_cmd_dbf_event_fsf("dismiss", fsf_req, NULL, 0); + goto skip_protstatus; + } + + /* log additional information provided by FSF (if any) */ + if (unlikely(fsf_req->qtcb->header.log_length)) { + /* do not trust them ;-) */ + if (fsf_req->qtcb->header.log_start > sizeof(struct fsf_qtcb)) { + ZFCP_LOG_NORMAL + ("bug: ULP (FSF logging) log data starts " + "beyond end of packet header. Ignored. " + "(start=%i, size=%li)\n", + fsf_req->qtcb->header.log_start, + sizeof(struct fsf_qtcb)); + goto forget_log; + } + if ((size_t) (fsf_req->qtcb->header.log_start + + fsf_req->qtcb->header.log_length) + > sizeof(struct fsf_qtcb)) { + ZFCP_LOG_NORMAL("bug: ULP (FSF logging) log data ends " + "beyond end of packet header. Ignored. " + "(start=%i, length=%i, size=%li)\n", + fsf_req->qtcb->header.log_start, + fsf_req->qtcb->header.log_length, + sizeof(struct fsf_qtcb)); + goto forget_log; + } + ZFCP_LOG_TRACE("ULP log data: \n"); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_TRACE, + (char *) fsf_req->qtcb + + fsf_req->qtcb->header.log_start, + fsf_req->qtcb->header.log_length); + } + forget_log: + + /* evaluate FSF Protocol Status */ + switch (fsf_req->qtcb->prefix.prot_status) { + + case FSF_PROT_GOOD: + ZFCP_LOG_TRACE("FSF_PROT_GOOD\n"); + break; + + case FSF_PROT_FSF_STATUS_PRESENTED: + ZFCP_LOG_TRACE("FSF_PROT_FSF_STATUS_PRESENTED\n"); + break; + + case FSF_PROT_QTCB_VERSION_ERROR: + ZFCP_LOG_FLAGS(0, "FSF_PROT_QTCB_VERSION_ERROR\n"); + ZFCP_LOG_NORMAL("error: The adapter %s contains " + "microcode of version 0x%x, the device driver " + "only supports 0x%x. Aborting.\n", + zfcp_get_busid_by_adapter(adapter), + fsf_req->qtcb->prefix.prot_status_qual. + version_error.fsf_version, ZFCP_QTCB_VERSION); + /* stop operation for this adapter */ + debug_text_exception(adapter->erp_dbf, 0, "prot_ver_err"); + zfcp_erp_adapter_shutdown(adapter, 0); + zfcp_cmd_dbf_event_fsf("qverserr", fsf_req, + &fsf_req->qtcb->prefix.prot_status_qual, + sizeof (union fsf_prot_status_qual)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_PROT_SEQ_NUMB_ERROR: + ZFCP_LOG_FLAGS(0, "FSF_PROT_SEQ_NUMB_ERROR\n"); + ZFCP_LOG_NORMAL("bug: Sequence number mismatch between " + "driver (0x%x) and adapter %s (0x%x). " + "Restarting all operations on this adapter.\n", + fsf_req->qtcb->prefix.req_seq_no, + zfcp_get_busid_by_adapter(adapter), + fsf_req->qtcb->prefix.prot_status_qual. + sequence_error.exp_req_seq_no); + debug_text_exception(adapter->erp_dbf, 0, "prot_seq_err"); + /* restart operation on this adapter */ + zfcp_erp_adapter_reopen(adapter, 0); + zfcp_cmd_dbf_event_fsf("seqnoerr", fsf_req, + &fsf_req->qtcb->prefix.prot_status_qual, + sizeof (union fsf_prot_status_qual)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_RETRY; + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_PROT_UNSUPP_QTCB_TYPE: + ZFCP_LOG_FLAGS(0, "FSF_PROT_UNSUP_QTCB_TYPE\n"); + ZFCP_LOG_NORMAL("error: Packet header type used by the " + "device driver is incompatible with " + "that used on adapter %s. " + "Stopping all operations on this adapter.\n", + zfcp_get_busid_by_adapter(adapter)); + debug_text_exception(adapter->erp_dbf, 0, "prot_unsup_qtcb"); + zfcp_erp_adapter_shutdown(adapter, 0); + zfcp_cmd_dbf_event_fsf("unsqtcbt", fsf_req, + &fsf_req->qtcb->prefix.prot_status_qual, + sizeof (union fsf_prot_status_qual)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_PROT_HOST_CONNECTION_INITIALIZING: + ZFCP_LOG_FLAGS(1, "FSF_PROT_HOST_CONNECTION_INITIALIZING\n"); + zfcp_cmd_dbf_event_fsf("hconinit", fsf_req, + &fsf_req->qtcb->prefix.prot_status_qual, + sizeof (union fsf_prot_status_qual)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + atomic_set_mask(ZFCP_STATUS_ADAPTER_HOST_CON_INIT, + &(adapter->status)); + debug_text_event(adapter->erp_dbf, 3, "prot_con_init"); + break; + + case FSF_PROT_DUPLICATE_REQUEST_ID: + ZFCP_LOG_FLAGS(0, "FSF_PROT_DUPLICATE_REQUEST_IDS\n"); + if (fsf_req->qtcb) { + ZFCP_LOG_NORMAL("bug: The request identifier 0x%Lx " + "to the adapter %s is ambiguous. " + "Stopping all operations on this " + "adapter.\n", + *(unsigned long long *) + (&fsf_req->qtcb->bottom.support. + req_handle), + zfcp_get_busid_by_adapter(adapter)); + } else { + ZFCP_LOG_NORMAL("bug: The request identifier %p " + "to the adapter %s is ambiguous. " + "Stopping all operations on this " + "adapter. " + "(bug: got this for an unsolicited " + "status read request)\n", + fsf_req, + zfcp_get_busid_by_adapter(adapter)); + } + debug_text_exception(adapter->erp_dbf, 0, "prot_dup_id"); + zfcp_erp_adapter_shutdown(adapter, 0); + zfcp_cmd_dbf_event_fsf("dupreqid", fsf_req, + &fsf_req->qtcb->prefix.prot_status_qual, + sizeof (union fsf_prot_status_qual)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_PROT_LINK_DOWN: + ZFCP_LOG_FLAGS(1, "FSF_PROT_LINK_DOWN\n"); + /* + * 'test and set' is not atomic here - + * it's ok as long as calls to our response queue handler + * (and thus execution of this code here) are serialized + * by the qdio module + */ + if (!atomic_test_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED, + &adapter->status)) { + switch (fsf_req->qtcb->prefix.prot_status_qual. + locallink_error.code) { + case FSF_PSQ_LINK_NOLIGHT: + ZFCP_LOG_INFO("The local link to adapter %s " + "is down (no light detected).\n", + zfcp_get_busid_by_adapter( + adapter)); + break; + case FSF_PSQ_LINK_WRAPPLUG: + ZFCP_LOG_INFO("The local link to adapter %s " + "is down (wrap plug detected).\n", + zfcp_get_busid_by_adapter( + adapter)); + break; + case FSF_PSQ_LINK_NOFCP: + ZFCP_LOG_INFO("The local link to adapter %s " + "is down (adjacent node on " + "link does not support FCP).\n", + zfcp_get_busid_by_adapter( + adapter)); + break; + default: + ZFCP_LOG_INFO("The local link to adapter %s " + "is down " + "(warning: unknown reason " + "code).\n", + zfcp_get_busid_by_adapter( + adapter)); + break; + + } + /* + * Due to the 'erp failed' flag the adapter won't + * be recovered but will be just set to 'blocked' + * state. All subordinary devices will have state + * 'blocked' and 'erp failed', too. + * Thus the adapter is still able to provide + * 'link up' status without being flooded with + * requests. + * (note: even 'close port' is not permitted) + */ + ZFCP_LOG_INFO("Stopping all operations for adapter " + "%s.\n", + zfcp_get_busid_by_adapter(adapter)); + atomic_set_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED | + ZFCP_STATUS_COMMON_ERP_FAILED, + &adapter->status); + zfcp_erp_adapter_reopen(adapter, 0); + debug_text_event(adapter->erp_dbf, 1, "prot_link_down"); + } + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_PROT_REEST_QUEUE: + ZFCP_LOG_FLAGS(1, "FSF_PROT_REEST_QUEUE\n"); + debug_text_event(adapter->erp_dbf, 1, "prot_reest_queue"); + ZFCP_LOG_INFO("The local link to adapter with " + "%s was re-plugged. " + "Re-starting operations on this adapter.\n", + zfcp_get_busid_by_adapter(adapter)); + /* All ports should be marked as ready to run again */ + zfcp_erp_modify_adapter_status(adapter, + ZFCP_STATUS_COMMON_RUNNING, + ZFCP_SET); + zfcp_erp_adapter_reopen(adapter, + ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED + | ZFCP_STATUS_COMMON_ERP_FAILED); + zfcp_cmd_dbf_event_fsf("reestque", fsf_req, + &fsf_req->qtcb->prefix.prot_status_qual, + sizeof (union fsf_prot_status_qual)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_PROT_ERROR_STATE: + ZFCP_LOG_FLAGS(0, "FSF_PROT_ERROR_STATE\n"); + ZFCP_LOG_NORMAL("error: The adapter %s " + "has entered the error state. " + "Restarting all operations on this " + "adapter.\n", + zfcp_get_busid_by_adapter(adapter)); + debug_text_event(adapter->erp_dbf, 0, "prot_err_sta"); + /* restart operation on this adapter */ + zfcp_erp_adapter_reopen(adapter, 0); + zfcp_cmd_dbf_event_fsf("proterrs", fsf_req, + &fsf_req->qtcb->prefix.prot_status_qual, + sizeof (union fsf_prot_status_qual)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_RETRY; + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + default: + ZFCP_LOG_NORMAL("bug: Transfer protocol status information " + "provided by the adapter %s " + "is not compatible with the device driver. " + "Stopping all operations on this adapter. " + "(debug info 0x%x).\n", + zfcp_get_busid_by_adapter(adapter), + fsf_req->qtcb->prefix.prot_status); + debug_text_event(adapter->erp_dbf, 0, "prot_inval:"); + debug_exception(adapter->erp_dbf, 0, + &fsf_req->qtcb->prefix.prot_status, + sizeof (u32)); + zfcp_erp_adapter_shutdown(adapter, 0); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + } + + skip_protstatus: + /* + * always call specific handlers to give them a chance to do + * something meaningful even in error cases + */ + zfcp_fsf_fsfstatus_eval(fsf_req); + return retval; +} + +/* + * function: zfcp_fsf_fsfstatus_eval + * + * purpose: evaluates FSF status of completed FSF request + * and acts accordingly + * + * returns: + */ +static int +zfcp_fsf_fsfstatus_eval(struct zfcp_fsf_req *fsf_req) +{ + int retval = 0; + + if (unlikely(fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR)) { + goto skip_fsfstatus; + } + + /* evaluate FSF Status */ + switch (fsf_req->qtcb->header.fsf_status) { + case FSF_UNKNOWN_COMMAND: + ZFCP_LOG_FLAGS(0, "FSF_UNKNOWN_COMMAND\n"); + ZFCP_LOG_NORMAL("bug: Command issued by the device driver is " + "not known by the adapter %s " + "Stopping all operations on this adapter. " + "(debug info 0x%x).\n", + zfcp_get_busid_by_adapter(fsf_req->adapter), + fsf_req->qtcb->header.fsf_command); + debug_text_exception(fsf_req->adapter->erp_dbf, 0, + "fsf_s_unknown"); + zfcp_erp_adapter_shutdown(fsf_req->adapter, 0); + zfcp_cmd_dbf_event_fsf("unknownc", fsf_req, + &fsf_req->qtcb->header.fsf_status_qual, + sizeof (union fsf_status_qual)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_FCP_RSP_AVAILABLE: + ZFCP_LOG_FLAGS(2, "FSF_FCP_RSP_AVAILABLE\n"); + ZFCP_LOG_DEBUG("FCP Sense data will be presented to the " + "SCSI stack.\n"); + debug_text_event(fsf_req->adapter->erp_dbf, 3, "fsf_s_rsp"); + break; + + case FSF_ADAPTER_STATUS_AVAILABLE: + ZFCP_LOG_FLAGS(2, "FSF_ADAPTER_STATUS_AVAILABLE\n"); + debug_text_event(fsf_req->adapter->erp_dbf, 2, "fsf_s_astatus"); + zfcp_fsf_fsfstatus_qual_eval(fsf_req); + break; + + default: + break; + } + + skip_fsfstatus: + /* + * always call specific handlers to give them a chance to do + * something meaningful even in error cases + */ + zfcp_fsf_req_dispatch(fsf_req); + + return retval; +} + +/* + * function: zfcp_fsf_fsfstatus_qual_eval + * + * purpose: evaluates FSF status-qualifier of completed FSF request + * and acts accordingly + * + * returns: + */ +static int +zfcp_fsf_fsfstatus_qual_eval(struct zfcp_fsf_req *fsf_req) +{ + int retval = 0; + + switch (fsf_req->qtcb->header.fsf_status_qual.word[0]) { + case FSF_SQ_FCP_RSP_AVAILABLE: + ZFCP_LOG_FLAGS(2, "FSF_SQ_FCP_RSP_AVAILABLE\n"); + debug_text_event(fsf_req->adapter->erp_dbf, 4, "fsf_sq_rsp"); + break; + case FSF_SQ_RETRY_IF_POSSIBLE: + ZFCP_LOG_FLAGS(2, "FSF_SQ_RETRY_IF_POSSIBLE\n"); + /* The SCSI-stack may now issue retries or escalate */ + debug_text_event(fsf_req->adapter->erp_dbf, 2, "fsf_sq_retry"); + zfcp_cmd_dbf_event_fsf("sqretry", fsf_req, + &fsf_req->qtcb->header.fsf_status_qual, + sizeof (union fsf_status_qual)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + case FSF_SQ_COMMAND_ABORTED: + ZFCP_LOG_FLAGS(2, "FSF_SQ_COMMAND_ABORTED\n"); + /* Carry the aborted state on to upper layer */ + debug_text_event(fsf_req->adapter->erp_dbf, 2, "fsf_sq_abort"); + zfcp_cmd_dbf_event_fsf("sqabort", fsf_req, + &fsf_req->qtcb->header.fsf_status_qual, + sizeof (union fsf_status_qual)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ABORTED; + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + case FSF_SQ_NO_RECOM: + ZFCP_LOG_FLAGS(0, "FSF_SQ_NO_RECOM\n"); + debug_text_exception(fsf_req->adapter->erp_dbf, 0, + "fsf_sq_no_rec"); + ZFCP_LOG_NORMAL("bug: No recommendation could be given for a" + "problem on the adapter %s " + "Stopping all operations on this adapter. ", + zfcp_get_busid_by_adapter(fsf_req->adapter)); + zfcp_erp_adapter_shutdown(fsf_req->adapter, 0); + zfcp_cmd_dbf_event_fsf("sqnrecom", fsf_req, + &fsf_req->qtcb->header.fsf_status_qual, + sizeof (union fsf_status_qual)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + case FSF_SQ_ULP_PROGRAMMING_ERROR: + ZFCP_LOG_FLAGS(0, "FSF_SQ_ULP_PROGRAMMING_ERROR\n"); + ZFCP_LOG_NORMAL("error: not enough SBALs for data transfer " + "(adapter %s)\n", + zfcp_get_busid_by_adapter(fsf_req->adapter)); + debug_text_exception(fsf_req->adapter->erp_dbf, 0, + "fsf_sq_ulp_err"); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE: + case FSF_SQ_NO_RETRY_POSSIBLE: + case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED: + /* dealt with in the respective functions */ + break; + default: + ZFCP_LOG_NORMAL("bug: Additional status info could " + "not be interpreted properly.\n"); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL, + (char *) &fsf_req->qtcb->header.fsf_status_qual, + sizeof (union fsf_status_qual)); + debug_text_event(fsf_req->adapter->erp_dbf, 0, "fsf_sq_inval:"); + debug_exception(fsf_req->adapter->erp_dbf, 0, + &fsf_req->qtcb->header.fsf_status_qual.word[0], + sizeof (u32)); + zfcp_cmd_dbf_event_fsf("squndef", fsf_req, + &fsf_req->qtcb->header.fsf_status_qual, + sizeof (union fsf_status_qual)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + } + + return retval; +} + +/* + * function: zfcp_fsf_req_dispatch + * + * purpose: calls the appropriate command specific handler + * + * returns: + */ +static int +zfcp_fsf_req_dispatch(struct zfcp_fsf_req *fsf_req) +{ + struct zfcp_erp_action *erp_action = fsf_req->erp_action; + struct zfcp_adapter *adapter = fsf_req->adapter; + int retval = 0; + + if (unlikely(fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR)) { + ZFCP_LOG_TRACE("fsf_req=%p, QTCB=%p\n", fsf_req, fsf_req->qtcb); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_TRACE, + (char *) fsf_req->qtcb, sizeof(struct fsf_qtcb)); + } + + switch (fsf_req->fsf_command) { + + case FSF_QTCB_FCP_CMND: + ZFCP_LOG_FLAGS(3, "FSF_QTCB_FCP_CMND\n"); + zfcp_fsf_send_fcp_command_handler(fsf_req); + break; + + case FSF_QTCB_ABORT_FCP_CMND: + ZFCP_LOG_FLAGS(2, "FSF_QTCB_ABORT_FCP_CMND\n"); + zfcp_fsf_abort_fcp_command_handler(fsf_req); + break; + + case FSF_QTCB_SEND_GENERIC: + ZFCP_LOG_FLAGS(2, "FSF_QTCB_SEND_GENERIC\n"); + zfcp_fsf_send_ct_handler(fsf_req); + break; + + case FSF_QTCB_OPEN_PORT_WITH_DID: + ZFCP_LOG_FLAGS(2, "FSF_QTCB_OPEN_PORT_WITH_DID\n"); + zfcp_fsf_open_port_handler(fsf_req); + break; + + case FSF_QTCB_OPEN_LUN: + ZFCP_LOG_FLAGS(2, "FSF_QTCB_OPEN_LUN\n"); + zfcp_fsf_open_unit_handler(fsf_req); + break; + + case FSF_QTCB_CLOSE_LUN: + ZFCP_LOG_FLAGS(2, "FSF_QTCB_CLOSE_LUN\n"); + zfcp_fsf_close_unit_handler(fsf_req); + break; + + case FSF_QTCB_CLOSE_PORT: + ZFCP_LOG_FLAGS(2, "FSF_QTCB_CLOSE_PORT\n"); + zfcp_fsf_close_port_handler(fsf_req); + break; + + case FSF_QTCB_CLOSE_PHYSICAL_PORT: + ZFCP_LOG_FLAGS(2, "FSF_QTCB_CLOSE_PHYSICAL_PORT\n"); + zfcp_fsf_close_physical_port_handler(fsf_req); + break; + + case FSF_QTCB_EXCHANGE_CONFIG_DATA: + ZFCP_LOG_FLAGS(2, "FSF_QTCB_EXCHANGE_CONFIG_DATA\n"); + zfcp_fsf_exchange_config_data_handler(fsf_req); + break; + + case FSF_QTCB_EXCHANGE_PORT_DATA: + ZFCP_LOG_FLAGS(2, "FSF_QTCB_EXCHANGE_PORT_DATA\n"); + zfcp_fsf_exchange_port_data_handler(fsf_req); + break; + + case FSF_QTCB_SEND_ELS: + ZFCP_LOG_FLAGS(2, "FSF_QTCB_SEND_ELS\n"); + zfcp_fsf_send_els_handler(fsf_req); + break; + + case FSF_QTCB_DOWNLOAD_CONTROL_FILE: + ZFCP_LOG_FLAGS(2, "FSF_QTCB_DOWNLOAD_CONTROL_FILE\n"); + zfcp_fsf_control_file_handler(fsf_req); + break; + + case FSF_QTCB_UPLOAD_CONTROL_FILE: + ZFCP_LOG_FLAGS(2, "FSF_QTCB_UPLOAD_CONTROL_FILE\n"); + zfcp_fsf_control_file_handler(fsf_req); + break; + + default: + ZFCP_LOG_FLAGS(2, "FSF_QTCB_UNKNOWN\n"); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + ZFCP_LOG_NORMAL("bug: Command issued by the device driver is " + "not supported by the adapter %s\n", + zfcp_get_busid_by_adapter(fsf_req->adapter)); + if (fsf_req->fsf_command != fsf_req->qtcb->header.fsf_command) + ZFCP_LOG_NORMAL + ("bug: Command issued by the device driver differs " + "from the command returned by the adapter %s " + "(debug info 0x%x, 0x%x).\n", + zfcp_get_busid_by_adapter(fsf_req->adapter), + fsf_req->fsf_command, + fsf_req->qtcb->header.fsf_command); + } + + if (!erp_action) + return retval; + + debug_text_event(adapter->erp_dbf, 3, "a_frh"); + debug_event(adapter->erp_dbf, 3, &erp_action->action, sizeof (int)); + zfcp_erp_async_handler(erp_action, 0); + + return retval; +} + +/* + * function: zfcp_fsf_status_read + * + * purpose: initiates a Status Read command at the specified adapter + * + * returns: + */ +int +zfcp_fsf_status_read(struct zfcp_adapter *adapter, int req_flags) +{ + struct zfcp_fsf_req *fsf_req; + struct fsf_status_read_buffer *status_buffer; + unsigned long lock_flags; + volatile struct qdio_buffer_element *sbale; + int retval = 0; + + /* setup new FSF request */ + retval = zfcp_fsf_req_create(adapter, FSF_QTCB_UNSOLICITED_STATUS, + req_flags | ZFCP_REQ_NO_QTCB, + adapter->pool.fsf_req_status_read, + &lock_flags, &fsf_req); + if (retval < 0) { + ZFCP_LOG_INFO("error: Could not create unsolicited status " + "buffer for adapter %s.\n", + zfcp_get_busid_by_adapter(adapter)); + goto failed_req_create; + } + + sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0); + sbale[0].flags |= SBAL_FLAGS0_TYPE_STATUS; + sbale[2].flags |= SBAL_FLAGS_LAST_ENTRY; + fsf_req->sbale_curr = 2; + + status_buffer = + mempool_alloc(adapter->pool.data_status_read, GFP_ATOMIC); + if (!status_buffer) { + ZFCP_LOG_NORMAL("bug: could not get some buffer\n"); + goto failed_buf; + } + memset(status_buffer, 0, sizeof (struct fsf_status_read_buffer)); + fsf_req->data.status_read.buffer = status_buffer; + + /* insert pointer to respective buffer */ + sbale = zfcp_qdio_sbale_curr(fsf_req); + sbale->addr = (void *) status_buffer; + sbale->length = sizeof(struct fsf_status_read_buffer); + + /* start QDIO request for this FSF request */ + retval = zfcp_fsf_req_send(fsf_req, NULL); + if (retval) { + ZFCP_LOG_DEBUG("error: Could not set-up unsolicited status " + "environment.\n"); + goto failed_req_send; + } + + ZFCP_LOG_TRACE("Status Read request initiated (adapter%s)\n", + zfcp_get_busid_by_adapter(adapter)); + goto out; + + failed_req_send: + mempool_free(status_buffer, adapter->pool.data_status_read); + + failed_buf: + zfcp_fsf_req_free(fsf_req); + failed_req_create: + out: + write_unlock_irqrestore(&adapter->request_queue.queue_lock, lock_flags); + return retval; +} + +static int +zfcp_fsf_status_read_port_closed(struct zfcp_fsf_req *fsf_req) +{ + struct fsf_status_read_buffer *status_buffer; + struct zfcp_adapter *adapter; + struct zfcp_port *port; + unsigned long flags; + + status_buffer = fsf_req->data.status_read.buffer; + adapter = fsf_req->adapter; + + read_lock_irqsave(&zfcp_data.config_lock, flags); + list_for_each_entry(port, &adapter->port_list_head, list) + if (port->d_id == (status_buffer->d_id & ZFCP_DID_MASK)) + break; + read_unlock_irqrestore(&zfcp_data.config_lock, flags); + + if (!port || (port->d_id != (status_buffer->d_id & ZFCP_DID_MASK))) { + ZFCP_LOG_NORMAL("bug: Reopen port indication received for" + "nonexisting port with d_id 0x%08x on " + "adapter %s. Ignored.\n", + status_buffer->d_id & ZFCP_DID_MASK, + zfcp_get_busid_by_adapter(adapter)); + goto out; + } + + switch (status_buffer->status_subtype) { + + case FSF_STATUS_READ_SUB_CLOSE_PHYS_PORT: + ZFCP_LOG_FLAGS(2, "FSF_STATUS_READ_SUB_CLOSE_PHYS_PORT\n"); + debug_text_event(adapter->erp_dbf, 3, "unsol_pc_phys:"); + zfcp_erp_port_reopen(port, 0); + break; + + case FSF_STATUS_READ_SUB_ERROR_PORT: + ZFCP_LOG_FLAGS(1, "FSF_STATUS_READ_SUB_ERROR_PORT\n"); + debug_text_event(adapter->erp_dbf, 1, "unsol_pc_err:"); + zfcp_erp_port_shutdown(port, 0); + break; + + default: + debug_text_event(adapter->erp_dbf, 0, "unsol_unk_sub:"); + debug_exception(adapter->erp_dbf, 0, + &status_buffer->status_subtype, sizeof (u32)); + ZFCP_LOG_NORMAL("bug: Undefined status subtype received " + "for a reopen indication on port with " + "d_id 0x%08x on the adapter %s. " + "Ignored. (debug info 0x%x)\n", + status_buffer->d_id, + zfcp_get_busid_by_adapter(adapter), + status_buffer->status_subtype); + } + out: + return 0; +} + +/* + * function: zfcp_fsf_status_read_handler + * + * purpose: is called for finished Open Port command + * + * returns: + */ +static int +zfcp_fsf_status_read_handler(struct zfcp_fsf_req *fsf_req) +{ + int retval = 0; + struct zfcp_adapter *adapter = fsf_req->adapter; + struct fsf_status_read_buffer *status_buffer = + fsf_req->data.status_read.buffer; + + if (fsf_req->status & ZFCP_STATUS_FSFREQ_DISMISSED) { + mempool_free(status_buffer, adapter->pool.data_status_read); + zfcp_fsf_req_cleanup(fsf_req); + goto out; + } + + switch (status_buffer->status_type) { + + case FSF_STATUS_READ_PORT_CLOSED: + ZFCP_LOG_FLAGS(1, "FSF_STATUS_READ_PORT_CLOSED\n"); + debug_text_event(adapter->erp_dbf, 3, "unsol_pclosed:"); + debug_event(adapter->erp_dbf, 3, + &status_buffer->d_id, sizeof (u32)); + zfcp_fsf_status_read_port_closed(fsf_req); + break; + + case FSF_STATUS_READ_INCOMING_ELS: + ZFCP_LOG_FLAGS(1, "FSF_STATUS_READ_INCOMING_ELS\n"); + debug_text_event(adapter->erp_dbf, 3, "unsol_els:"); + zfcp_fsf_incoming_els(fsf_req); + break; + + case FSF_STATUS_READ_SENSE_DATA_AVAIL: + ZFCP_LOG_FLAGS(1, "FSF_STATUS_READ_SENSE_DATA_AVAIL\n"); + debug_text_event(adapter->erp_dbf, 3, "unsol_sense:"); + ZFCP_LOG_INFO("unsolicited sense data received (adapter %s)\n", + zfcp_get_busid_by_adapter(adapter)); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL, (char *) status_buffer, + sizeof(struct fsf_status_read_buffer)); + break; + + case FSF_STATUS_READ_BIT_ERROR_THRESHOLD: + ZFCP_LOG_FLAGS(1, "FSF_STATUS_READ_BIT_ERROR_THRESHOLD\n"); + debug_text_event(adapter->erp_dbf, 3, "unsol_bit_err:"); + ZFCP_LOG_NORMAL("Bit error threshold data received:\n"); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL, + (char *) status_buffer, + sizeof (struct fsf_status_read_buffer)); + break; + + case FSF_STATUS_READ_LINK_DOWN: + ZFCP_LOG_FLAGS(1, "FSF_STATUS_READ_LINK_DOWN\n"); + debug_text_event(adapter->erp_dbf, 0, "unsol_link_down:"); + ZFCP_LOG_INFO("Local link to adapter %s is down\n", + zfcp_get_busid_by_adapter(adapter)); + atomic_set_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED, + &adapter->status); + zfcp_erp_adapter_failed(adapter); + break; + + case FSF_STATUS_READ_LINK_UP: + ZFCP_LOG_FLAGS(1, "FSF_STATUS_READ_LINK_UP\n"); + debug_text_event(adapter->erp_dbf, 2, "unsol_link_up:"); + ZFCP_LOG_INFO("Local link to adapter %s was replugged. " + "Restarting operations on this adapter\n", + zfcp_get_busid_by_adapter(adapter)); + /* All ports should be marked as ready to run again */ + zfcp_erp_modify_adapter_status(adapter, + ZFCP_STATUS_COMMON_RUNNING, + ZFCP_SET); + zfcp_erp_adapter_reopen(adapter, + ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED + | ZFCP_STATUS_COMMON_ERP_FAILED); + break; + + case FSF_STATUS_READ_CFDC_UPDATED: + ZFCP_LOG_FLAGS(1, "FSF_STATUS_READ_CFDC_UPDATED\n"); + debug_text_event(adapter->erp_dbf, 2, "unsol_cfdc_update:"); + ZFCP_LOG_INFO("CFDC has been updated on the adapter %s\n", + zfcp_get_busid_by_adapter(adapter)); + zfcp_erp_adapter_access_changed(adapter); + break; + + case FSF_STATUS_READ_CFDC_HARDENED: + ZFCP_LOG_FLAGS(1, "FSF_STATUS_READ_CFDC_HARDENED\n"); + debug_text_event(adapter->erp_dbf, 2, "unsol_cfdc_harden:"); + switch (status_buffer->status_subtype) { + case FSF_STATUS_READ_SUB_CFDC_HARDENED_ON_SE: + ZFCP_LOG_INFO("CFDC of adapter %s saved on SE\n", + zfcp_get_busid_by_adapter(adapter)); + break; + case FSF_STATUS_READ_SUB_CFDC_HARDENED_ON_SE2: + ZFCP_LOG_INFO("CFDC of adapter %s has been copied " + "to the secondary SE\n", + zfcp_get_busid_by_adapter(adapter)); + break; + default: + ZFCP_LOG_INFO("CFDC of adapter %s has been hardened\n", + zfcp_get_busid_by_adapter(adapter)); + } + break; + + default: + debug_text_event(adapter->erp_dbf, 0, "unsol_unknown:"); + debug_exception(adapter->erp_dbf, 0, + &status_buffer->status_type, sizeof (u32)); + ZFCP_LOG_NORMAL("bug: An unsolicited status packet of unknown " + "type was received (debug info 0x%x)\n", + status_buffer->status_type); + ZFCP_LOG_DEBUG("Dump of status_read_buffer %p:\n", + status_buffer); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, + (char *) status_buffer, + sizeof (struct fsf_status_read_buffer)); + break; + } + mempool_free(status_buffer, adapter->pool.data_status_read); + zfcp_fsf_req_cleanup(fsf_req); + /* + * recycle buffer and start new request repeat until outbound + * queue is empty or adapter shutdown is requested + */ + /* + * FIXME(qdio): + * we may wait in the req_create for 5s during shutdown, so + * qdio_cleanup will have to wait at least that long before returning + * with failure to allow us a proper cleanup under all circumstances + */ + /* + * FIXME: + * allocation failure possible? (Is this code needed?) + */ + retval = zfcp_fsf_status_read(adapter, 0); + if (retval < 0) { + ZFCP_LOG_INFO("Failed to create unsolicited status read " + "request for the adapter %s.\n", + zfcp_get_busid_by_adapter(adapter)); + /* temporary fix to avoid status read buffer shortage */ + adapter->status_read_failed++; + if ((ZFCP_STATUS_READS_RECOM - adapter->status_read_failed) + < ZFCP_STATUS_READ_FAILED_THRESHOLD) { + ZFCP_LOG_INFO("restart adapter %s due to status read " + "buffer shortage\n", + zfcp_get_busid_by_adapter(adapter)); + zfcp_erp_adapter_reopen(adapter, 0); + } + } + out: + return retval; +} + +/* + * function: zfcp_fsf_abort_fcp_command + * + * purpose: tells FSF to abort a running SCSI command + * + * returns: address of initiated FSF request + * NULL - request could not be initiated + * + * FIXME(design): should be watched by a timeout !!! + * FIXME(design) shouldn't this be modified to return an int + * also...don't know how though + */ +struct zfcp_fsf_req * +zfcp_fsf_abort_fcp_command(unsigned long old_req_id, + struct zfcp_adapter *adapter, + struct zfcp_unit *unit, int req_flags) +{ + volatile struct qdio_buffer_element *sbale; + unsigned long lock_flags; + struct zfcp_fsf_req *fsf_req = NULL; + int retval = 0; + + /* setup new FSF request */ + retval = zfcp_fsf_req_create(adapter, FSF_QTCB_ABORT_FCP_CMND, + req_flags, adapter->pool.fsf_req_abort, + &lock_flags, &fsf_req); + if (retval < 0) { + ZFCP_LOG_INFO("error: Failed to create an abort command " + "request for lun 0x%016Lx on port 0x%016Lx " + "on adapter %s.\n", + unit->fcp_lun, + unit->port->wwpn, + zfcp_get_busid_by_adapter(adapter)); + goto out; + } + + sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0); + sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; + sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; + + fsf_req->data.abort_fcp_command.unit = unit; + + /* set handles of unit and its parent port in QTCB */ + fsf_req->qtcb->header.lun_handle = unit->handle; + fsf_req->qtcb->header.port_handle = unit->port->handle; + + /* set handle of request which should be aborted */ + fsf_req->qtcb->bottom.support.req_handle = (u64) old_req_id; + + /* start QDIO request for this FSF request */ + + zfcp_fsf_start_scsi_er_timer(adapter); + retval = zfcp_fsf_req_send(fsf_req, NULL); + if (retval) { + del_timer(&adapter->scsi_er_timer); + ZFCP_LOG_INFO("error: Failed to send abort command request " + "on adapter %s, port 0x%016Lx, unit 0x%016Lx\n", + zfcp_get_busid_by_adapter(adapter), + unit->port->wwpn, unit->fcp_lun); + zfcp_fsf_req_free(fsf_req); + fsf_req = NULL; + goto out; + } + + ZFCP_LOG_DEBUG("Abort FCP Command request initiated " + "(adapter%s, port d_id=0x%08x, " + "unit x%016Lx, old_req_id=0x%lx)\n", + zfcp_get_busid_by_adapter(adapter), + unit->port->d_id, + unit->fcp_lun, old_req_id); + out: + write_unlock_irqrestore(&adapter->request_queue.queue_lock, lock_flags); + return fsf_req; +} + +/* + * function: zfcp_fsf_abort_fcp_command_handler + * + * purpose: is called for finished Abort FCP Command request + * + * returns: + */ +static int +zfcp_fsf_abort_fcp_command_handler(struct zfcp_fsf_req *new_fsf_req) +{ + int retval = -EINVAL; + struct zfcp_unit *unit = new_fsf_req->data.abort_fcp_command.unit; + unsigned char status_qual = + new_fsf_req->qtcb->header.fsf_status_qual.word[0]; + + del_timer(&new_fsf_req->adapter->scsi_er_timer); + + if (new_fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) { + /* do not set ZFCP_STATUS_FSFREQ_ABORTSUCCEEDED */ + goto skip_fsfstatus; + } + + /* evaluate FSF status in QTCB */ + switch (new_fsf_req->qtcb->header.fsf_status) { + + case FSF_PORT_HANDLE_NOT_VALID: + if (status_qual >> 4 != status_qual % 0xf) { + ZFCP_LOG_FLAGS(2, "FSF_PORT_HANDLE_NOT_VALID\n"); + debug_text_event(new_fsf_req->adapter->erp_dbf, 3, + "fsf_s_phand_nv0"); + /* + * In this case a command that was sent prior to a port + * reopen was aborted (handles are different). This is + * fine. + */ + } else { + ZFCP_LOG_FLAGS(1, "FSF_PORT_HANDLE_NOT_VALID\n"); + ZFCP_LOG_INFO("Temporary port identifier 0x%x for " + "port 0x%016Lx on adapter %s invalid. " + "This may happen occasionally.\n", + unit->port->handle, + unit->port->wwpn, + zfcp_get_busid_by_unit(unit)); + ZFCP_LOG_INFO("status qualifier:\n"); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_INFO, + (char *) &new_fsf_req->qtcb->header. + fsf_status_qual, + sizeof (union fsf_status_qual)); + /* Let's hope this sorts out the mess */ + debug_text_event(new_fsf_req->adapter->erp_dbf, 1, + "fsf_s_phand_nv1"); + zfcp_erp_adapter_reopen(unit->port->adapter, 0); + new_fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + } + break; + + case FSF_LUN_HANDLE_NOT_VALID: + if (status_qual >> 4 != status_qual % 0xf) { + /* 2 */ + ZFCP_LOG_FLAGS(0, "FSF_LUN_HANDLE_NOT_VALID\n"); + debug_text_event(new_fsf_req->adapter->erp_dbf, 3, + "fsf_s_lhand_nv0"); + /* + * In this case a command that was sent prior to a unit + * reopen was aborted (handles are different). + * This is fine. + */ + } else { + ZFCP_LOG_FLAGS(1, "FSF_LUN_HANDLE_NOT_VALID\n"); + ZFCP_LOG_INFO + ("Warning: Temporary LUN identifier 0x%x of LUN " + "0x%016Lx on port 0x%016Lx on adapter %s is " + "invalid. This may happen in rare cases. " + "Trying to re-establish link.\n", + unit->handle, + unit->fcp_lun, + unit->port->wwpn, + zfcp_get_busid_by_unit(unit)); + ZFCP_LOG_DEBUG("Status qualifier data:\n"); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, + (char *) &new_fsf_req->qtcb->header. + fsf_status_qual, + sizeof (union fsf_status_qual)); + /* Let's hope this sorts out the mess */ + debug_text_event(new_fsf_req->adapter->erp_dbf, 1, + "fsf_s_lhand_nv1"); + zfcp_erp_port_reopen(unit->port, 0); + new_fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + } + break; + + case FSF_FCP_COMMAND_DOES_NOT_EXIST: + ZFCP_LOG_FLAGS(2, "FSF_FCP_COMMAND_DOES_NOT_EXIST\n"); + retval = 0; + debug_text_event(new_fsf_req->adapter->erp_dbf, 3, + "fsf_s_no_exist"); + new_fsf_req->status |= ZFCP_STATUS_FSFREQ_ABORTNOTNEEDED; + break; + + case FSF_PORT_BOXED: + /* 2 */ + ZFCP_LOG_FLAGS(0, "FSF_PORT_BOXED\n"); + ZFCP_LOG_INFO("Remote port 0x%016Lx on adapter %s needs to " + "be reopened\n", unit->port->wwpn, + zfcp_get_busid_by_unit(unit)); + debug_text_event(new_fsf_req->adapter->erp_dbf, 2, + "fsf_s_pboxed"); + zfcp_erp_port_reopen(unit->port, 0); + new_fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR + | ZFCP_STATUS_FSFREQ_RETRY; + break; + + case FSF_LUN_BOXED: + ZFCP_LOG_FLAGS(0, "FSF_LUN_BOXED\n"); + ZFCP_LOG_INFO( + "unit 0x%016Lx on port 0x%016Lx on adapter %s needs " + "to be reopened\n", + unit->fcp_lun, unit->port->wwpn, + zfcp_get_busid_by_unit(unit)); + debug_text_event(new_fsf_req->adapter->erp_dbf, 1, "fsf_s_lboxed"); + zfcp_erp_unit_reopen(unit, 0); + zfcp_cmd_dbf_event_fsf("unitbox", new_fsf_req, + &new_fsf_req->qtcb->header.fsf_status_qual, + sizeof(union fsf_status_qual)); + new_fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR + | ZFCP_STATUS_FSFREQ_RETRY; + break; + + case FSF_ADAPTER_STATUS_AVAILABLE: + /* 2 */ + ZFCP_LOG_FLAGS(0, "FSF_ADAPTER_STATUS_AVAILABLE\n"); + switch (new_fsf_req->qtcb->header.fsf_status_qual.word[0]) { + case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE: + ZFCP_LOG_FLAGS(2, + "FSF_SQ_INVOKE_LINK_TEST_PROCEDURE\n"); + debug_text_event(new_fsf_req->adapter->erp_dbf, 1, + "fsf_sq_ltest"); + /* reopening link to port */ + zfcp_erp_port_reopen(unit->port, 0); + new_fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED: + ZFCP_LOG_FLAGS(2, + "FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED\n"); + /* SCSI stack will escalate */ + debug_text_event(new_fsf_req->adapter->erp_dbf, 1, + "fsf_sq_ulp"); + new_fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + default: + ZFCP_LOG_NORMAL + ("bug: Wrong status qualifier 0x%x arrived.\n", + new_fsf_req->qtcb->header.fsf_status_qual.word[0]); + debug_text_event(new_fsf_req->adapter->erp_dbf, 0, + "fsf_sq_inval:"); + debug_exception(new_fsf_req->adapter->erp_dbf, 0, + &new_fsf_req->qtcb->header. + fsf_status_qual.word[0], sizeof (u32)); + break; + } + break; + + case FSF_GOOD: + /* 3 */ + ZFCP_LOG_FLAGS(0, "FSF_GOOD\n"); + retval = 0; + new_fsf_req->status |= ZFCP_STATUS_FSFREQ_ABORTSUCCEEDED; + break; + + default: + ZFCP_LOG_NORMAL("bug: An unknown FSF Status was presented " + "(debug info 0x%x)\n", + new_fsf_req->qtcb->header.fsf_status); + debug_text_event(new_fsf_req->adapter->erp_dbf, 0, + "fsf_s_inval:"); + debug_exception(new_fsf_req->adapter->erp_dbf, 0, + &new_fsf_req->qtcb->header.fsf_status, + sizeof (u32)); + break; + } + skip_fsfstatus: + return retval; +} + +/** + * zfcp_use_one_sbal - checks whether req buffer and resp bother each fit into + * one SBALE + * Two scatter-gather lists are passed, one for the reqeust and one for the + * response. + */ +static inline int +zfcp_use_one_sbal(struct scatterlist *req, int req_count, + struct scatterlist *resp, int resp_count) +{ + return ((req_count == 1) && + (resp_count == 1) && + (((unsigned long) zfcp_sg_to_address(&req[0]) & + PAGE_MASK) == + ((unsigned long) (zfcp_sg_to_address(&req[0]) + + req[0].length - 1) & PAGE_MASK)) && + (((unsigned long) zfcp_sg_to_address(&resp[0]) & + PAGE_MASK) == + ((unsigned long) (zfcp_sg_to_address(&resp[0]) + + resp[0].length - 1) & PAGE_MASK))); +} + +/** + * zfcp_fsf_send_ct - initiate a Generic Service request (FC-GS) + * @ct: pointer to struct zfcp_send_ct which conatins all needed data for + * the request + * @pool: pointer to memory pool, if non-null this pool is used to allocate + * a struct zfcp_fsf_req + * @erp_action: pointer to erp_action, if non-null the Generic Service request + * is sent within error recovery + */ +int +zfcp_fsf_send_ct(struct zfcp_send_ct *ct, mempool_t *pool, + struct zfcp_erp_action *erp_action) +{ + volatile struct qdio_buffer_element *sbale; + struct zfcp_port *port; + struct zfcp_adapter *adapter; + struct zfcp_fsf_req *fsf_req; + unsigned long lock_flags; + int bytes; + int ret = 0; + + port = ct->port; + adapter = port->adapter; + + ret = zfcp_fsf_req_create(adapter, FSF_QTCB_SEND_GENERIC, + ZFCP_WAIT_FOR_SBAL | ZFCP_REQ_AUTO_CLEANUP, + pool, &lock_flags, &fsf_req); + if (ret < 0) { + ZFCP_LOG_INFO("error: Could not create CT request (FC-GS) for " + "adapter: %s\n", + zfcp_get_busid_by_adapter(adapter)); + goto failed_req; + } + + if (erp_action != NULL) { + erp_action->fsf_req = fsf_req; + fsf_req->erp_action = erp_action; + } + + sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0); + if (zfcp_use_one_sbal(ct->req, ct->req_count, + ct->resp, ct->resp_count)){ + /* both request buffer and response buffer + fit into one sbale each */ + sbale[0].flags |= SBAL_FLAGS0_TYPE_WRITE_READ; + sbale[2].addr = zfcp_sg_to_address(&ct->req[0]); + sbale[2].length = ct->req[0].length; + sbale[3].addr = zfcp_sg_to_address(&ct->resp[0]); + sbale[3].length = ct->resp[0].length; + sbale[3].flags |= SBAL_FLAGS_LAST_ENTRY; + } else if (adapter->supported_features & + FSF_FEATURE_ELS_CT_CHAINED_SBALS) { + /* try to use chained SBALs */ + bytes = zfcp_qdio_sbals_from_sg(fsf_req, + SBAL_FLAGS0_TYPE_WRITE_READ, + ct->req, ct->req_count, + ZFCP_MAX_SBALS_PER_CT_REQ); + if (bytes <= 0) { + ZFCP_LOG_INFO("error: creation of CT request failed " + "on adapter %s\n", + zfcp_get_busid_by_adapter(adapter)); + if (bytes == 0) + ret = -ENOMEM; + else + ret = bytes; + + goto failed_send; + } + fsf_req->qtcb->bottom.support.req_buf_length = bytes; + fsf_req->sbale_curr = ZFCP_LAST_SBALE_PER_SBAL; + bytes = zfcp_qdio_sbals_from_sg(fsf_req, + SBAL_FLAGS0_TYPE_WRITE_READ, + ct->resp, ct->resp_count, + ZFCP_MAX_SBALS_PER_CT_REQ); + if (bytes <= 0) { + ZFCP_LOG_INFO("error: creation of CT request failed " + "on adapter %s\n", + zfcp_get_busid_by_adapter(adapter)); + if (bytes == 0) + ret = -ENOMEM; + else + ret = bytes; + + goto failed_send; + } + fsf_req->qtcb->bottom.support.resp_buf_length = bytes; + } else { + /* reject send generic request */ + ZFCP_LOG_INFO( + "error: microcode does not support chained SBALs," + "CT request too big (adapter %s)\n", + zfcp_get_busid_by_adapter(adapter)); + ret = -EOPNOTSUPP; + goto failed_send; + } + + /* settings in QTCB */ + fsf_req->qtcb->header.port_handle = port->handle; + fsf_req->qtcb->bottom.support.service_class = adapter->fc_service_class; + fsf_req->qtcb->bottom.support.timeout = ct->timeout; + fsf_req->data.send_ct = ct; + + /* start QDIO request for this FSF request */ + ret = zfcp_fsf_req_send(fsf_req, ct->timer); + if (ret) { + ZFCP_LOG_DEBUG("error: initiation of CT request failed " + "(adapter %s, port 0x%016Lx)\n", + zfcp_get_busid_by_adapter(adapter), port->wwpn); + goto failed_send; + } + + ZFCP_LOG_DEBUG("CT request initiated (adapter %s, port 0x%016Lx)\n", + zfcp_get_busid_by_adapter(adapter), port->wwpn); + goto out; + + failed_send: + zfcp_fsf_req_free(fsf_req); + if (erp_action != NULL) { + erp_action->fsf_req = NULL; + } + failed_req: + out: + write_unlock_irqrestore(&adapter->request_queue.queue_lock, + lock_flags); + return ret; +} + +/** + * zfcp_fsf_send_ct_handler - handler for Generic Service requests + * @fsf_req: pointer to struct zfcp_fsf_req + * + * Data specific for the Generic Service request is passed by + * fsf_req->data.send_ct + * Usually a specific handler for the request is called via + * fsf_req->data.send_ct->handler at end of this function. + */ +static int +zfcp_fsf_send_ct_handler(struct zfcp_fsf_req *fsf_req) +{ + struct zfcp_port *port; + struct zfcp_adapter *adapter; + struct zfcp_send_ct *send_ct; + struct fsf_qtcb_header *header; + struct fsf_qtcb_bottom_support *bottom; + int retval = -EINVAL; + u16 subtable, rule, counter; + + adapter = fsf_req->adapter; + send_ct = fsf_req->data.send_ct; + port = send_ct->port; + header = &fsf_req->qtcb->header; + bottom = &fsf_req->qtcb->bottom.support; + + if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) + goto skip_fsfstatus; + + /* evaluate FSF status in QTCB */ + switch (header->fsf_status) { + + case FSF_GOOD: + ZFCP_LOG_FLAGS(2,"FSF_GOOD\n"); + retval = 0; + break; + + case FSF_SERVICE_CLASS_NOT_SUPPORTED: + ZFCP_LOG_FLAGS(2, "FSF_SERVICE_CLASS_NOT_SUPPORTED\n"); + if (adapter->fc_service_class <= 3) { + ZFCP_LOG_INFO("error: adapter %s does not support fc " + "class %d.\n", + zfcp_get_busid_by_port(port), + adapter->fc_service_class); + } else { + ZFCP_LOG_INFO("bug: The fibre channel class at the " + "adapter %s is invalid. " + "(debug info %d)\n", + zfcp_get_busid_by_port(port), + adapter->fc_service_class); + } + /* stop operation for this adapter */ + debug_text_exception(adapter->erp_dbf, 0, "fsf_s_class_nsup"); + zfcp_erp_adapter_shutdown(adapter, 0); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_ADAPTER_STATUS_AVAILABLE: + ZFCP_LOG_FLAGS(2, "FSF_ADAPTER_STATUS_AVAILABLE\n"); + switch (header->fsf_status_qual.word[0]){ + case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE: + ZFCP_LOG_FLAGS(2,"FSF_SQ_INVOKE_LINK_TEST_PROCEDURE\n"); + /* reopening link to port */ + debug_text_event(adapter->erp_dbf, 1, "fsf_sq_ltest"); + zfcp_test_link(port); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED: + ZFCP_LOG_FLAGS(2,"FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED\n"); + /* ERP strategy will escalate */ + debug_text_event(adapter->erp_dbf, 1, "fsf_sq_ulp"); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + default: + ZFCP_LOG_INFO("bug: Wrong status qualifier 0x%x " + "arrived.\n", + header->fsf_status_qual.word[0]); + break; + } + break; + + case FSF_ACCESS_DENIED: + ZFCP_LOG_FLAGS(2, "FSF_ACCESS_DENIED\n"); + ZFCP_LOG_NORMAL("access denied, cannot send generic service " + "command (adapter %s, port d_id=0x%08x)\n", + zfcp_get_busid_by_port(port), port->d_id); + for (counter = 0; counter < 2; counter++) { + subtable = header->fsf_status_qual.halfword[counter * 2]; + rule = header->fsf_status_qual.halfword[counter * 2 + 1]; + switch (subtable) { + case FSF_SQ_CFDC_SUBTABLE_OS: + case FSF_SQ_CFDC_SUBTABLE_PORT_WWPN: + case FSF_SQ_CFDC_SUBTABLE_PORT_DID: + case FSF_SQ_CFDC_SUBTABLE_LUN: + ZFCP_LOG_INFO("Access denied (%s rule %d)\n", + zfcp_act_subtable_type[subtable], rule); + break; + } + } + debug_text_event(adapter->erp_dbf, 1, "fsf_s_access"); + zfcp_erp_port_access_denied(port); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_GENERIC_COMMAND_REJECTED: + ZFCP_LOG_FLAGS(2, "FSF_GENERIC_COMMAND_REJECTED\n"); + ZFCP_LOG_INFO("generic service command rejected " + "(adapter %s, port d_id=0x%08x)\n", + zfcp_get_busid_by_port(port), port->d_id); + ZFCP_LOG_INFO("status qualifier:\n"); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_INFO, + (char *) &header->fsf_status_qual, + sizeof (union fsf_status_qual)); + debug_text_event(adapter->erp_dbf, 1, "fsf_s_gcom_rej"); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_PORT_HANDLE_NOT_VALID: + ZFCP_LOG_FLAGS(2, "FSF_PORT_HANDLE_NOT_VALID\n"); + ZFCP_LOG_DEBUG("Temporary port identifier 0x%x for port " + "0x%016Lx on adapter %s invalid. This may " + "happen occasionally.\n", port->handle, + port->wwpn, zfcp_get_busid_by_port(port)); + ZFCP_LOG_INFO("status qualifier:\n"); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_INFO, + (char *) &header->fsf_status_qual, + sizeof (union fsf_status_qual)); + debug_text_event(adapter->erp_dbf, 1, "fsf_s_phandle_nv"); + zfcp_erp_adapter_reopen(adapter, 0); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_PORT_BOXED: + ZFCP_LOG_FLAGS(2, "FSF_PORT_BOXED\n"); + ZFCP_LOG_INFO("port needs to be reopened " + "(adapter %s, port d_id=0x%08x)\n", + zfcp_get_busid_by_port(port), port->d_id); + debug_text_event(adapter->erp_dbf, 2, "fsf_s_pboxed"); + zfcp_erp_port_reopen(port, 0); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR + | ZFCP_STATUS_FSFREQ_RETRY; + break; + + /* following states should never occure, all cases avoided + in zfcp_fsf_send_ct - but who knows ... */ + case FSF_PAYLOAD_SIZE_MISMATCH: + ZFCP_LOG_FLAGS(2, "FSF_PAYLOAD_SIZE_MISMATCH\n"); + ZFCP_LOG_INFO("payload size mismatch (adapter: %s, " + "req_buf_length=%d, resp_buf_length=%d)\n", + zfcp_get_busid_by_adapter(adapter), + bottom->req_buf_length, bottom->resp_buf_length); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + case FSF_REQUEST_SIZE_TOO_LARGE: + ZFCP_LOG_FLAGS(2, "FSF_REQUEST_SIZE_TOO_LARGE\n"); + ZFCP_LOG_INFO("request size too large (adapter: %s, " + "req_buf_length=%d)\n", + zfcp_get_busid_by_adapter(adapter), + bottom->req_buf_length); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + case FSF_RESPONSE_SIZE_TOO_LARGE: + ZFCP_LOG_FLAGS(2, "FSF_RESPONSE_SIZE_TOO_LARGE\n"); + ZFCP_LOG_INFO("response size too large (adapter: %s, " + "resp_buf_length=%d)\n", + zfcp_get_busid_by_adapter(adapter), + bottom->resp_buf_length); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + case FSF_SBAL_MISMATCH: + ZFCP_LOG_FLAGS(2, "FSF_SBAL_MISMATCH\n"); + ZFCP_LOG_INFO("SBAL mismatch (adapter: %s, req_buf_length=%d, " + "resp_buf_length=%d)\n", + zfcp_get_busid_by_adapter(adapter), + bottom->req_buf_length, bottom->resp_buf_length); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + default: + ZFCP_LOG_NORMAL("bug: An unknown FSF Status was presented " + "(debug info 0x%x)\n", header->fsf_status); + debug_text_event(adapter->erp_dbf, 0, "fsf_sq_inval:"); + debug_exception(adapter->erp_dbf, 0, + &header->fsf_status_qual.word[0], sizeof (u32)); + break; + } + +skip_fsfstatus: + send_ct->status = retval; + + if (send_ct->handler != NULL) + send_ct->handler(send_ct->handler_data); + + return retval; +} + +/** + * zfcp_fsf_send_els - initiate an ELS command (FC-FS) + * @els: pointer to struct zfcp_send_els which contains all needed data for + * the command. + */ +int +zfcp_fsf_send_els(struct zfcp_send_els *els) +{ + volatile struct qdio_buffer_element *sbale; + struct zfcp_fsf_req *fsf_req; + fc_id_t d_id; + struct zfcp_adapter *adapter; + unsigned long lock_flags; + int bytes; + int ret = 0; + + d_id = els->d_id; + adapter = els->adapter; + + ret = zfcp_fsf_req_create(adapter, FSF_QTCB_SEND_ELS, + ZFCP_REQ_AUTO_CLEANUP, + NULL, &lock_flags, &fsf_req); + if (ret < 0) { + ZFCP_LOG_INFO("error: creation of ELS request failed " + "(adapter %s, port d_id: 0x%08x)\n", + zfcp_get_busid_by_adapter(adapter), d_id); + goto failed_req; + } + + sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0); + if (zfcp_use_one_sbal(els->req, els->req_count, + els->resp, els->resp_count)){ + /* both request buffer and response buffer + fit into one sbale each */ + sbale[0].flags |= SBAL_FLAGS0_TYPE_WRITE_READ; + sbale[2].addr = zfcp_sg_to_address(&els->req[0]); + sbale[2].length = els->req[0].length; + sbale[3].addr = zfcp_sg_to_address(&els->resp[0]); + sbale[3].length = els->resp[0].length; + sbale[3].flags |= SBAL_FLAGS_LAST_ENTRY; + } else if (adapter->supported_features & + FSF_FEATURE_ELS_CT_CHAINED_SBALS) { + /* try to use chained SBALs */ + bytes = zfcp_qdio_sbals_from_sg(fsf_req, + SBAL_FLAGS0_TYPE_WRITE_READ, + els->req, els->req_count, + ZFCP_MAX_SBALS_PER_ELS_REQ); + if (bytes <= 0) { + ZFCP_LOG_INFO("error: creation of ELS request failed " + "(adapter %s, port d_id: 0x%08x)\n", + zfcp_get_busid_by_adapter(adapter), d_id); + if (bytes == 0) { + ret = -ENOMEM; + } else { + ret = bytes; + } + goto failed_send; + } + fsf_req->qtcb->bottom.support.req_buf_length = bytes; + fsf_req->sbale_curr = ZFCP_LAST_SBALE_PER_SBAL; + bytes = zfcp_qdio_sbals_from_sg(fsf_req, + SBAL_FLAGS0_TYPE_WRITE_READ, + els->resp, els->resp_count, + ZFCP_MAX_SBALS_PER_ELS_REQ); + if (bytes <= 0) { + ZFCP_LOG_INFO("error: creation of ELS request failed " + "(adapter %s, port d_id: 0x%08x)\n", + zfcp_get_busid_by_adapter(adapter), d_id); + if (bytes == 0) { + ret = -ENOMEM; + } else { + ret = bytes; + } + goto failed_send; + } + fsf_req->qtcb->bottom.support.resp_buf_length = bytes; + } else { + /* reject request */ + ZFCP_LOG_INFO("error: microcode does not support chained SBALs" + ", ELS request too big (adapter %s, " + "port d_id: 0x%08x)\n", + zfcp_get_busid_by_adapter(adapter), d_id); + ret = -EOPNOTSUPP; + goto failed_send; + } + + /* settings in QTCB */ + fsf_req->qtcb->bottom.support.d_id = d_id; + fsf_req->qtcb->bottom.support.service_class = adapter->fc_service_class; + fsf_req->qtcb->bottom.support.timeout = ZFCP_ELS_TIMEOUT; + fsf_req->data.send_els = els; + + sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0); + + /* start QDIO request for this FSF request */ + ret = zfcp_fsf_req_send(fsf_req, els->timer); + if (ret) { + ZFCP_LOG_DEBUG("error: initiation of ELS request failed " + "(adapter %s, port d_id: 0x%08x)\n", + zfcp_get_busid_by_adapter(adapter), d_id); + goto failed_send; + } + + ZFCP_LOG_DEBUG("ELS request initiated (adapter %s, port d_id: " + "0x%08x)\n", zfcp_get_busid_by_adapter(adapter), d_id); + goto out; + + failed_send: + zfcp_fsf_req_free(fsf_req); + + failed_req: + out: + write_unlock_irqrestore(&adapter->request_queue.queue_lock, + lock_flags); + + return ret; +} + +/** + * zfcp_fsf_send_els_handler - handler for ELS commands + * @fsf_req: pointer to struct zfcp_fsf_req + * + * Data specific for the ELS command is passed by + * fsf_req->data.send_els + * Usually a specific handler for the command is called via + * fsf_req->data.send_els->handler at end of this function. + */ +static int zfcp_fsf_send_els_handler(struct zfcp_fsf_req *fsf_req) +{ + struct zfcp_adapter *adapter; + fc_id_t d_id; + struct zfcp_port *port; + struct fsf_qtcb_header *header; + struct fsf_qtcb_bottom_support *bottom; + struct zfcp_send_els *send_els; + int retval = -EINVAL; + u16 subtable, rule, counter; + + send_els = fsf_req->data.send_els; + adapter = send_els->adapter; + d_id = send_els->d_id; + header = &fsf_req->qtcb->header; + bottom = &fsf_req->qtcb->bottom.support; + + if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) + goto skip_fsfstatus; + + switch (header->fsf_status) { + + case FSF_GOOD: + ZFCP_LOG_FLAGS(2, "FSF_GOOD\n"); + retval = 0; + break; + + case FSF_SERVICE_CLASS_NOT_SUPPORTED: + ZFCP_LOG_FLAGS(2, "FSF_SERVICE_CLASS_NOT_SUPPORTED\n"); + if (adapter->fc_service_class <= 3) { + ZFCP_LOG_INFO("error: adapter %s does " + "not support fibrechannel class %d.\n", + zfcp_get_busid_by_adapter(adapter), + adapter->fc_service_class); + } else { + ZFCP_LOG_INFO("bug: The fibrechannel class at " + "adapter %s is invalid. " + "(debug info %d)\n", + zfcp_get_busid_by_adapter(adapter), + adapter->fc_service_class); + } + /* stop operation for this adapter */ + debug_text_exception(adapter->erp_dbf, 0, "fsf_s_class_nsup"); + zfcp_erp_adapter_shutdown(adapter, 0); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_ADAPTER_STATUS_AVAILABLE: + ZFCP_LOG_FLAGS(2, "FSF_ADAPTER_STATUS_AVAILABLE\n"); + switch (header->fsf_status_qual.word[0]){ + case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE: + ZFCP_LOG_FLAGS(2,"FSF_SQ_INVOKE_LINK_TEST_PROCEDURE\n"); + debug_text_event(adapter->erp_dbf, 1, "fsf_sq_ltest"); + if (send_els->ls_code != ZFCP_LS_ADISC) { + read_lock(&zfcp_data.config_lock); + port = zfcp_get_port_by_did(adapter, d_id); + if (port) + zfcp_test_link(port); + read_unlock(&zfcp_data.config_lock); + } + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED: + ZFCP_LOG_FLAGS(2,"FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED\n"); + debug_text_event(adapter->erp_dbf, 1, "fsf_sq_ulp"); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + retval = + zfcp_handle_els_rjt(header->fsf_status_qual.word[1], + (struct zfcp_ls_rjt_par *) + &header->fsf_status_qual.word[2]); + break; + case FSF_SQ_RETRY_IF_POSSIBLE: + ZFCP_LOG_FLAGS(2, "FSF_SQ_RETRY_IF_POSSIBLE\n"); + debug_text_event(adapter->erp_dbf, 1, "fsf_sq_retry"); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + default: + ZFCP_LOG_INFO("bug: Wrong status qualifier 0x%x\n", + header->fsf_status_qual.word[0]); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_INFO, + (char*)header->fsf_status_qual.word, 16); + } + break; + + case FSF_ELS_COMMAND_REJECTED: + ZFCP_LOG_FLAGS(2, "FSF_ELS_COMMAND_REJECTED\n"); + ZFCP_LOG_INFO("ELS has been rejected because command filter " + "prohibited sending " + "(adapter: %s, port d_id: 0x%08x)\n", + zfcp_get_busid_by_adapter(adapter), d_id); + + break; + + case FSF_PAYLOAD_SIZE_MISMATCH: + ZFCP_LOG_FLAGS(2, "FSF_PAYLOAD_SIZE_MISMATCH\n"); + ZFCP_LOG_INFO( + "ELS request size and ELS response size must be either " + "both 0, or both greater than 0 " + "(adapter: %s, req_buf_length=%d resp_buf_length=%d)\n", + zfcp_get_busid_by_adapter(adapter), + bottom->req_buf_length, + bottom->resp_buf_length); + break; + + case FSF_REQUEST_SIZE_TOO_LARGE: + ZFCP_LOG_FLAGS(2, "FSF_REQUEST_SIZE_TOO_LARGE\n"); + ZFCP_LOG_INFO( + "Length of the ELS request buffer, " + "specified in QTCB bottom, " + "exceeds the size of the buffers " + "that have been allocated for ELS request data " + "(adapter: %s, req_buf_length=%d)\n", + zfcp_get_busid_by_adapter(adapter), + bottom->req_buf_length); + break; + + case FSF_RESPONSE_SIZE_TOO_LARGE: + ZFCP_LOG_FLAGS(2, "FSF_RESPONSE_SIZE_TOO_LARGE\n"); + ZFCP_LOG_INFO( + "Length of the ELS response buffer, " + "specified in QTCB bottom, " + "exceeds the size of the buffers " + "that have been allocated for ELS response data " + "(adapter: %s, resp_buf_length=%d)\n", + zfcp_get_busid_by_adapter(adapter), + bottom->resp_buf_length); + break; + + case FSF_SBAL_MISMATCH: + /* should never occure, avoided in zfcp_fsf_send_els */ + ZFCP_LOG_FLAGS(2, "FSF_SBAL_MISMATCH\n"); + ZFCP_LOG_INFO("SBAL mismatch (adapter: %s, req_buf_length=%d, " + "resp_buf_length=%d)\n", + zfcp_get_busid_by_adapter(adapter), + bottom->req_buf_length, bottom->resp_buf_length); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_ACCESS_DENIED: + ZFCP_LOG_FLAGS(2, "FSF_ACCESS_DENIED\n"); + ZFCP_LOG_NORMAL("access denied, cannot send ELS command " + "(adapter %s, port d_id=0x%08x)\n", + zfcp_get_busid_by_adapter(adapter), d_id); + for (counter = 0; counter < 2; counter++) { + subtable = header->fsf_status_qual.halfword[counter * 2]; + rule = header->fsf_status_qual.halfword[counter * 2 + 1]; + switch (subtable) { + case FSF_SQ_CFDC_SUBTABLE_OS: + case FSF_SQ_CFDC_SUBTABLE_PORT_WWPN: + case FSF_SQ_CFDC_SUBTABLE_PORT_DID: + case FSF_SQ_CFDC_SUBTABLE_LUN: + ZFCP_LOG_INFO("Access denied (%s rule %d)\n", + zfcp_act_subtable_type[subtable], rule); + break; + } + } + debug_text_event(adapter->erp_dbf, 1, "fsf_s_access"); + read_lock(&zfcp_data.config_lock); + port = zfcp_get_port_by_did(adapter, d_id); + if (port != NULL) + zfcp_erp_port_access_denied(port); + read_unlock(&zfcp_data.config_lock); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + default: + ZFCP_LOG_NORMAL( + "bug: An unknown FSF Status was presented " + "(adapter: %s, fsf_status=0x%08x)\n", + zfcp_get_busid_by_adapter(adapter), + header->fsf_status); + debug_text_event(adapter->erp_dbf, 0, "fsf_sq_inval"); + debug_exception(adapter->erp_dbf, 0, + &header->fsf_status_qual.word[0], sizeof(u32)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + } + +skip_fsfstatus: + send_els->status = retval; + + if (send_els->handler != 0) + send_els->handler(send_els->handler_data); + + return retval; +} + +/* + * function: + * + * purpose: + * + * returns: address of initiated FSF request + * NULL - request could not be initiated + */ +int +zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action) +{ + volatile struct qdio_buffer_element *sbale; + unsigned long lock_flags; + int retval = 0; + + /* setup new FSF request */ + retval = zfcp_fsf_req_create(erp_action->adapter, + FSF_QTCB_EXCHANGE_CONFIG_DATA, + ZFCP_REQ_AUTO_CLEANUP, + erp_action->adapter->pool.fsf_req_erp, + &lock_flags, &(erp_action->fsf_req)); + if (retval < 0) { + ZFCP_LOG_INFO("error: Could not create exchange configuration " + "data request for adapter %s.\n", + zfcp_get_busid_by_adapter(erp_action->adapter)); + goto out; + } + + sbale = zfcp_qdio_sbale_req(erp_action->fsf_req, + erp_action->fsf_req->sbal_curr, 0); + sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; + sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; + + erp_action->fsf_req->erp_action = erp_action; + erp_action->fsf_req->qtcb->bottom.config.feature_selection = + (FSF_FEATURE_CFDC | FSF_FEATURE_LUN_SHARING); + + /* start QDIO request for this FSF request */ + retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer); + if (retval) { + ZFCP_LOG_INFO + ("error: Could not send exchange configuration data " + "command on the adapter %s\n", + zfcp_get_busid_by_adapter(erp_action->adapter)); + zfcp_fsf_req_free(erp_action->fsf_req); + erp_action->fsf_req = NULL; + goto out; + } + + ZFCP_LOG_DEBUG("exchange configuration data request initiated " + "(adapter %s)\n", + zfcp_get_busid_by_adapter(erp_action->adapter)); + + out: + write_unlock_irqrestore(&erp_action->adapter->request_queue.queue_lock, + lock_flags); + return retval; +} + +/** + * zfcp_fsf_exchange_config_evaluate + * @fsf_req: fsf_req which belongs to xchg config data request + * @xchg_ok: specifies if xchg config data was incomplete or complete (0/1) + * + * returns: -EIO on error, 0 otherwise + */ +static int +zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *fsf_req, int xchg_ok) +{ + struct fsf_qtcb_bottom_config *bottom; + struct zfcp_adapter *adapter = fsf_req->adapter; + + bottom = &fsf_req->qtcb->bottom.config; + ZFCP_LOG_DEBUG("low/high QTCB version 0x%x/0x%x of FSF\n", + bottom->low_qtcb_version, bottom->high_qtcb_version); + adapter->fsf_lic_version = bottom->lic_version; + adapter->supported_features = bottom->supported_features; + + if (xchg_ok) { + adapter->wwnn = bottom->nport_serv_param.wwnn; + adapter->wwpn = bottom->nport_serv_param.wwpn; + adapter->s_id = bottom->s_id & ZFCP_DID_MASK; + adapter->fc_topology = bottom->fc_topology; + adapter->fc_link_speed = bottom->fc_link_speed; + adapter->hydra_version = bottom->adapter_type; + } else { + adapter->wwnn = 0; + adapter->wwpn = 0; + adapter->s_id = 0; + adapter->fc_topology = 0; + adapter->fc_link_speed = 0; + adapter->hydra_version = 0; + } + + if(adapter->supported_features & FSF_FEATURE_HBAAPI_MANAGEMENT){ + adapter->hardware_version = bottom->hardware_version; + memcpy(adapter->serial_number, bottom->serial_number, 17); + EBCASC(adapter->serial_number, sizeof(adapter->serial_number)); + } + + ZFCP_LOG_INFO("The adapter %s reported the following characteristics:\n" + "WWNN 0x%016Lx, " + "WWPN 0x%016Lx, " + "S_ID 0x%08x,\n" + "adapter version 0x%x, " + "LIC version 0x%x, " + "FC link speed %d Gb/s\n", + zfcp_get_busid_by_adapter(adapter), + adapter->wwnn, + adapter->wwpn, + (unsigned int) adapter->s_id, + adapter->hydra_version, + adapter->fsf_lic_version, + adapter->fc_link_speed); + if (ZFCP_QTCB_VERSION < bottom->low_qtcb_version) { + ZFCP_LOG_NORMAL("error: the adapter %s " + "only supports newer control block " + "versions in comparison to this device " + "driver (try updated device driver)\n", + zfcp_get_busid_by_adapter(adapter)); + debug_text_event(adapter->erp_dbf, 0, "low_qtcb_ver"); + zfcp_erp_adapter_shutdown(adapter, 0); + return -EIO; + } + if (ZFCP_QTCB_VERSION > bottom->high_qtcb_version) { + ZFCP_LOG_NORMAL("error: the adapter %s " + "only supports older control block " + "versions than this device driver uses" + "(consider a microcode upgrade)\n", + zfcp_get_busid_by_adapter(adapter)); + debug_text_event(adapter->erp_dbf, 0, "high_qtcb_ver"); + zfcp_erp_adapter_shutdown(adapter, 0); + return -EIO; + } + return 0; +} + +/* + * function: zfcp_fsf_exchange_config_data_handler + * + * purpose: is called for finished Exchange Configuration Data command + * + * returns: + */ +static int +zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *fsf_req) +{ + struct fsf_qtcb_bottom_config *bottom; + struct zfcp_adapter *adapter = fsf_req->adapter; + + if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) + return -EIO; + + switch (fsf_req->qtcb->header.fsf_status) { + + case FSF_GOOD: + ZFCP_LOG_FLAGS(2, "FSF_GOOD\n"); + + if (zfcp_fsf_exchange_config_evaluate(fsf_req, 1)) + return -EIO; + + switch (adapter->fc_topology) { + case FSF_TOPO_P2P: + ZFCP_LOG_FLAGS(1, "FSF_TOPO_P2P\n"); + ZFCP_LOG_NORMAL("error: Point-to-point fibrechannel " + "configuration detected at adapter %s " + "unsupported, shutting down adapter\n", + zfcp_get_busid_by_adapter(adapter)); + debug_text_event(fsf_req->adapter->erp_dbf, 0, + "top-p-to-p"); + zfcp_erp_adapter_shutdown(adapter, 0); + return -EIO; + case FSF_TOPO_AL: + ZFCP_LOG_FLAGS(1, "FSF_TOPO_AL\n"); + ZFCP_LOG_NORMAL("error: Arbitrated loop fibrechannel " + "topology detected at adapter %s " + "unsupported, shutting down adapter\n", + zfcp_get_busid_by_adapter(adapter)); + debug_text_event(fsf_req->adapter->erp_dbf, 0, + "top-al"); + zfcp_erp_adapter_shutdown(adapter, 0); + return -EIO; + case FSF_TOPO_FABRIC: + ZFCP_LOG_FLAGS(1, "FSF_TOPO_FABRIC\n"); + ZFCP_LOG_INFO("Switched fabric fibrechannel " + "network detected at adapter %s.\n", + zfcp_get_busid_by_adapter(adapter)); + break; + default: + ZFCP_LOG_NORMAL("bug: The fibrechannel topology " + "reported by the exchange " + "configuration command for " + "the adapter %s is not " + "of a type known to the zfcp " + "driver, shutting down adapter\n", + zfcp_get_busid_by_adapter(adapter)); + debug_text_exception(fsf_req->adapter->erp_dbf, 0, + "unknown-topo"); + zfcp_erp_adapter_shutdown(adapter, 0); + return -EIO; + } + bottom = &fsf_req->qtcb->bottom.config; + if (bottom->max_qtcb_size < sizeof(struct fsf_qtcb)) { + ZFCP_LOG_NORMAL("bug: Maximum QTCB size (%d bytes) " + "allowed by the adapter %s " + "is lower than the minimum " + "required by the driver (%ld bytes).\n", + bottom->max_qtcb_size, + zfcp_get_busid_by_adapter(adapter), + sizeof(struct fsf_qtcb)); + debug_text_event(fsf_req->adapter->erp_dbf, 0, + "qtcb-size"); + debug_event(fsf_req->adapter->erp_dbf, 0, + &bottom->max_qtcb_size, sizeof (u32)); + zfcp_erp_adapter_shutdown(adapter, 0); + return -EIO; + } + atomic_set_mask(ZFCP_STATUS_ADAPTER_XCONFIG_OK, + &adapter->status); + break; + case FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE: + debug_text_event(adapter->erp_dbf, 0, "xchg-inco"); + + if (zfcp_fsf_exchange_config_evaluate(fsf_req, 0)) + return -EIO; + + ZFCP_LOG_INFO("Local link to adapter %s is down\n", + zfcp_get_busid_by_adapter(adapter)); + atomic_set_mask(ZFCP_STATUS_ADAPTER_XCONFIG_OK | + ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED, + &adapter->status); + zfcp_erp_adapter_failed(adapter); + break; + default: + debug_text_event(fsf_req->adapter->erp_dbf, 0, "fsf-stat-ng"); + debug_event(fsf_req->adapter->erp_dbf, 0, + &fsf_req->qtcb->header.fsf_status, sizeof (u32)); + zfcp_erp_adapter_shutdown(adapter, 0); + return -EIO; + } + return 0; +} + +/** + * zfcp_fsf_exchange_port_data - request information about local port + * @adapter: for which port data is requested + * @data: response to exchange port data request + */ +int +zfcp_fsf_exchange_port_data(struct zfcp_adapter *adapter, + struct fsf_qtcb_bottom_port *data) +{ + volatile struct qdio_buffer_element *sbale; + int retval = 0; + unsigned long lock_flags; + struct zfcp_fsf_req *fsf_req; + struct timer_list *timer; + + if(!(adapter->supported_features & FSF_FEATURE_HBAAPI_MANAGEMENT)){ + ZFCP_LOG_INFO("error: exchange port data " + "command not supported by adapter %s\n", + zfcp_get_busid_by_adapter(adapter)); + return -EOPNOTSUPP; + } + + timer = kmalloc(sizeof(struct timer_list), GFP_KERNEL); + if (!timer) + return -ENOMEM; + + /* setup new FSF request */ + retval = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA, + 0, 0, &lock_flags, &fsf_req); + if (retval < 0) { + ZFCP_LOG_INFO("error: Out of resources. Could not create an " + "exchange port data request for" + "the adapter %s.\n", + zfcp_get_busid_by_adapter(adapter)); + write_unlock_irqrestore(&adapter->request_queue.queue_lock, + lock_flags); + goto out; + } + + sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0); + sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; + sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; + + fsf_req->data.port_data = data; + + init_timer(timer); + timer->function = zfcp_fsf_request_timeout_handler; + timer->data = (unsigned long) adapter; + timer->expires = ZFCP_FSF_REQUEST_TIMEOUT; + + retval = zfcp_fsf_req_send(fsf_req, timer); + if (retval) { + ZFCP_LOG_INFO("error: Could not send an exchange port data " + "command on the adapter %s\n", + zfcp_get_busid_by_adapter(adapter)); + zfcp_fsf_req_free(fsf_req); + write_unlock_irqrestore(&adapter->request_queue.queue_lock, + lock_flags); + goto out; + } + + ZFCP_LOG_DEBUG("Exchange Port Data request initiated (adapter %s)\n", + zfcp_get_busid_by_adapter(adapter)); + + write_unlock_irqrestore(&adapter->request_queue.queue_lock, + lock_flags); + + wait_event(fsf_req->completion_wq, + fsf_req->status & ZFCP_STATUS_FSFREQ_COMPLETED); + del_timer_sync(timer); + zfcp_fsf_req_cleanup(fsf_req); + out: + kfree(timer); + return retval; +} + + +/** + * zfcp_fsf_exchange_port_data_handler - handler for exchange_port_data request + * @fsf_req: pointer to struct zfcp_fsf_req + */ +static void +zfcp_fsf_exchange_port_data_handler(struct zfcp_fsf_req *fsf_req) +{ + struct fsf_qtcb_bottom_port *bottom; + struct fsf_qtcb_bottom_port *data = fsf_req->data.port_data; + + if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) + return; + + switch (fsf_req->qtcb->header.fsf_status) { + case FSF_GOOD: + ZFCP_LOG_FLAGS(2,"FSF_GOOD\n"); + bottom = &fsf_req->qtcb->bottom.port; + memcpy(data, bottom, sizeof(*data)); + break; + + default: + debug_text_event(fsf_req->adapter->erp_dbf, 0, "xchg-port-ng"); + debug_event(fsf_req->adapter->erp_dbf, 0, + &fsf_req->qtcb->header.fsf_status, sizeof(u32)); + } +} + + +/* + * function: zfcp_fsf_open_port + * + * purpose: + * + * returns: address of initiated FSF request + * NULL - request could not be initiated + */ +int +zfcp_fsf_open_port(struct zfcp_erp_action *erp_action) +{ + volatile struct qdio_buffer_element *sbale; + unsigned long lock_flags; + int retval = 0; + + /* setup new FSF request */ + retval = zfcp_fsf_req_create(erp_action->adapter, + FSF_QTCB_OPEN_PORT_WITH_DID, + ZFCP_WAIT_FOR_SBAL | ZFCP_REQ_AUTO_CLEANUP, + erp_action->adapter->pool.fsf_req_erp, + &lock_flags, &(erp_action->fsf_req)); + if (retval < 0) { + ZFCP_LOG_INFO("error: Could not create open port request " + "for port 0x%016Lx on adapter %s.\n", + erp_action->port->wwpn, + zfcp_get_busid_by_adapter(erp_action->adapter)); + goto out; + } + + sbale = zfcp_qdio_sbale_req(erp_action->fsf_req, + erp_action->fsf_req->sbal_curr, 0); + sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; + sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; + + erp_action->fsf_req->qtcb->bottom.support.d_id = erp_action->port->d_id; + atomic_set_mask(ZFCP_STATUS_COMMON_OPENING, &erp_action->port->status); + erp_action->fsf_req->data.open_port.port = erp_action->port; + erp_action->fsf_req->erp_action = erp_action; + + /* start QDIO request for this FSF request */ + retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer); + if (retval) { + ZFCP_LOG_INFO("error: Could not send open port request for " + "port 0x%016Lx on adapter %s.\n", + erp_action->port->wwpn, + zfcp_get_busid_by_adapter(erp_action->adapter)); + zfcp_fsf_req_free(erp_action->fsf_req); + erp_action->fsf_req = NULL; + goto out; + } + + ZFCP_LOG_DEBUG("open port request initiated " + "(adapter %s, port 0x%016Lx)\n", + zfcp_get_busid_by_adapter(erp_action->adapter), + erp_action->port->wwpn); + out: + write_unlock_irqrestore(&erp_action->adapter->request_queue.queue_lock, + lock_flags); + return retval; +} + +/* + * function: zfcp_fsf_open_port_handler + * + * purpose: is called for finished Open Port command + * + * returns: + */ +static int +zfcp_fsf_open_port_handler(struct zfcp_fsf_req *fsf_req) +{ + int retval = -EINVAL; + struct zfcp_port *port; + struct fsf_plogi *plogi; + struct fsf_qtcb_header *header; + u16 subtable, rule, counter; + + port = fsf_req->data.open_port.port; + header = &fsf_req->qtcb->header; + + if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) { + /* don't change port status in our bookkeeping */ + goto skip_fsfstatus; + } + + /* evaluate FSF status in QTCB */ + switch (header->fsf_status) { + + case FSF_PORT_ALREADY_OPEN: + ZFCP_LOG_FLAGS(0, "FSF_PORT_ALREADY_OPEN\n"); + ZFCP_LOG_NORMAL("bug: remote port 0x%016Lx on adapter %s " + "is already open.\n", + port->wwpn, zfcp_get_busid_by_port(port)); + debug_text_exception(fsf_req->adapter->erp_dbf, 0, + "fsf_s_popen"); + /* + * This is a bug, however operation should continue normally + * if it is simply ignored + */ + break; + + case FSF_ACCESS_DENIED: + ZFCP_LOG_FLAGS(2, "FSF_ACCESS_DENIED\n"); + ZFCP_LOG_NORMAL("Access denied, cannot open port 0x%016Lx " + "on adapter %s\n", + port->wwpn, zfcp_get_busid_by_port(port)); + for (counter = 0; counter < 2; counter++) { + subtable = header->fsf_status_qual.halfword[counter * 2]; + rule = header->fsf_status_qual.halfword[counter * 2 + 1]; + switch (subtable) { + case FSF_SQ_CFDC_SUBTABLE_OS: + case FSF_SQ_CFDC_SUBTABLE_PORT_WWPN: + case FSF_SQ_CFDC_SUBTABLE_PORT_DID: + case FSF_SQ_CFDC_SUBTABLE_LUN: + ZFCP_LOG_INFO("Access denied (%s rule %d)\n", + zfcp_act_subtable_type[subtable], rule); + break; + } + } + debug_text_event(fsf_req->adapter->erp_dbf, 1, "fsf_s_access"); + zfcp_erp_port_access_denied(port); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_MAXIMUM_NUMBER_OF_PORTS_EXCEEDED: + ZFCP_LOG_FLAGS(1, "FSF_MAXIMUM_NUMBER_OF_PORTS_EXCEEDED\n"); + ZFCP_LOG_INFO("error: The FSF adapter is out of resources. " + "The remote port 0x%016Lx on adapter %s " + "could not be opened. Disabling it.\n", + port->wwpn, zfcp_get_busid_by_port(port)); + debug_text_event(fsf_req->adapter->erp_dbf, 1, + "fsf_s_max_ports"); + zfcp_erp_port_failed(port); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_ADAPTER_STATUS_AVAILABLE: + ZFCP_LOG_FLAGS(2, "FSF_ADAPTER_STATUS_AVAILABLE\n"); + switch (header->fsf_status_qual.word[0]) { + case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE: + ZFCP_LOG_FLAGS(2, + "FSF_SQ_INVOKE_LINK_TEST_PROCEDURE\n"); + debug_text_event(fsf_req->adapter->erp_dbf, 1, + "fsf_sq_ltest"); + /* ERP strategy will escalate */ + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED: + /* ERP strategy will escalate */ + debug_text_event(fsf_req->adapter->erp_dbf, 1, + "fsf_sq_ulp"); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + case FSF_SQ_NO_RETRY_POSSIBLE: + ZFCP_LOG_FLAGS(0, "FSF_SQ_NO_RETRY_POSSIBLE\n"); + ZFCP_LOG_NORMAL("The remote port 0x%016Lx on " + "adapter %s could not be opened. " + "Disabling it.\n", + port->wwpn, + zfcp_get_busid_by_port(port)); + debug_text_exception(fsf_req->adapter->erp_dbf, 0, + "fsf_sq_no_retry"); + zfcp_erp_port_failed(port); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + default: + ZFCP_LOG_NORMAL + ("bug: Wrong status qualifier 0x%x arrived.\n", + header->fsf_status_qual.word[0]); + debug_text_event(fsf_req->adapter->erp_dbf, 0, + "fsf_sq_inval:"); + debug_exception( + fsf_req->adapter->erp_dbf, 0, + &header->fsf_status_qual.word[0], + sizeof (u32)); + break; + } + break; + + case FSF_GOOD: + ZFCP_LOG_FLAGS(3, "FSF_GOOD\n"); + /* save port handle assigned by FSF */ + port->handle = header->port_handle; + ZFCP_LOG_INFO("The remote port 0x%016Lx via adapter %s " + "was opened, it's port handle is 0x%x\n", + port->wwpn, zfcp_get_busid_by_port(port), + port->handle); + /* mark port as open */ + atomic_set_mask(ZFCP_STATUS_COMMON_OPEN | + ZFCP_STATUS_PORT_PHYS_OPEN, &port->status); + retval = 0; + /* check whether D_ID has changed during open */ + /* + * FIXME: This check is not airtight, as the FCP channel does + * not monitor closures of target port connections caused on + * the remote side. Thus, they might miss out on invalidating + * locally cached WWPNs (and other N_Port parameters) of gone + * target ports. So, our heroic attempt to make things safe + * could be undermined by 'open port' response data tagged with + * obsolete WWPNs. Another reason to monitor potential + * connection closures ourself at least (by interpreting + * incoming ELS' and unsolicited status). It just crosses my + * mind that one should be able to cross-check by means of + * another GID_PN straight after a port has been opened. + * Alternately, an ADISC/PDISC ELS should suffice, as well. + */ + plogi = (struct fsf_plogi *) fsf_req->qtcb->bottom.support.els; + if (!atomic_test_mask(ZFCP_STATUS_PORT_NO_WWPN, &port->status)) + { + if (fsf_req->qtcb->bottom.support.els1_length < + ((((unsigned long) &plogi->serv_param.wwpn) - + ((unsigned long) plogi)) + sizeof (u64))) { + ZFCP_LOG_INFO( + "warning: insufficient length of " + "PLOGI payload (%i)\n", + fsf_req->qtcb->bottom.support.els1_length); + debug_text_event(fsf_req->adapter->erp_dbf, 0, + "fsf_s_short_plogi:"); + /* skip sanity check and assume wwpn is ok */ + } else { + if (plogi->serv_param.wwpn != port->wwpn) { + ZFCP_LOG_INFO("warning: d_id of port " + "0x%016Lx changed during " + "open\n", port->wwpn); + debug_text_event( + fsf_req->adapter->erp_dbf, 0, + "fsf_s_did_change:"); + atomic_clear_mask( + ZFCP_STATUS_PORT_DID_DID, + &port->status); + } else + port->wwnn = plogi->serv_param.wwnn; + } + } + break; + + case FSF_UNKNOWN_OP_SUBTYPE: + /* should never occure, subtype not set in zfcp_fsf_open_port */ + ZFCP_LOG_FLAGS(2, "FSF_UNKNOWN_OP_SUBTYPE\n"); + ZFCP_LOG_INFO("unknown operation subtype (adapter: %s, " + "op_subtype=0x%x)\n", + zfcp_get_busid_by_port(port), + fsf_req->qtcb->bottom.support.operation_subtype); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + default: + ZFCP_LOG_NORMAL("bug: An unknown FSF Status was presented " + "(debug info 0x%x)\n", + header->fsf_status); + debug_text_event(fsf_req->adapter->erp_dbf, 0, "fsf_s_inval:"); + debug_exception(fsf_req->adapter->erp_dbf, 0, + &header->fsf_status, sizeof (u32)); + break; + } + + skip_fsfstatus: + atomic_clear_mask(ZFCP_STATUS_COMMON_OPENING, &port->status); + return retval; +} + +/* + * function: zfcp_fsf_close_port + * + * purpose: submit FSF command "close port" + * + * returns: address of initiated FSF request + * NULL - request could not be initiated + */ +int +zfcp_fsf_close_port(struct zfcp_erp_action *erp_action) +{ + volatile struct qdio_buffer_element *sbale; + unsigned long lock_flags; + int retval = 0; + + /* setup new FSF request */ + retval = zfcp_fsf_req_create(erp_action->adapter, + FSF_QTCB_CLOSE_PORT, + ZFCP_WAIT_FOR_SBAL | ZFCP_REQ_AUTO_CLEANUP, + erp_action->adapter->pool.fsf_req_erp, + &lock_flags, &(erp_action->fsf_req)); + if (retval < 0) { + ZFCP_LOG_INFO("error: Could not create a close port request " + "for port 0x%016Lx on adapter %s.\n", + erp_action->port->wwpn, + zfcp_get_busid_by_adapter(erp_action->adapter)); + goto out; + } + + sbale = zfcp_qdio_sbale_req(erp_action->fsf_req, + erp_action->fsf_req->sbal_curr, 0); + sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; + sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; + + atomic_set_mask(ZFCP_STATUS_COMMON_CLOSING, &erp_action->port->status); + erp_action->fsf_req->data.close_port.port = erp_action->port; + erp_action->fsf_req->erp_action = erp_action; + erp_action->fsf_req->qtcb->header.port_handle = + erp_action->port->handle; + + /* start QDIO request for this FSF request */ + retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer); + if (retval) { + ZFCP_LOG_INFO("error: Could not send a close port request for " + "port 0x%016Lx on adapter %s.\n", + erp_action->port->wwpn, + zfcp_get_busid_by_adapter(erp_action->adapter)); + zfcp_fsf_req_free(erp_action->fsf_req); + erp_action->fsf_req = NULL; + goto out; + } + + ZFCP_LOG_TRACE("close port request initiated " + "(adapter %s, port 0x%016Lx)\n", + zfcp_get_busid_by_adapter(erp_action->adapter), + erp_action->port->wwpn); + out: + write_unlock_irqrestore(&erp_action->adapter->request_queue.queue_lock, + lock_flags); + return retval; +} + +/* + * function: zfcp_fsf_close_port_handler + * + * purpose: is called for finished Close Port FSF command + * + * returns: + */ +static int +zfcp_fsf_close_port_handler(struct zfcp_fsf_req *fsf_req) +{ + int retval = -EINVAL; + struct zfcp_port *port; + + port = fsf_req->data.close_port.port; + + if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) { + /* don't change port status in our bookkeeping */ + goto skip_fsfstatus; + } + + /* evaluate FSF status in QTCB */ + switch (fsf_req->qtcb->header.fsf_status) { + + case FSF_PORT_HANDLE_NOT_VALID: + ZFCP_LOG_FLAGS(1, "FSF_PORT_HANDLE_NOT_VALID\n"); + ZFCP_LOG_INFO("Temporary port identifier 0x%x for port " + "0x%016Lx on adapter %s invalid. This may happen " + "occasionally.\n", port->handle, + port->wwpn, zfcp_get_busid_by_port(port)); + ZFCP_LOG_DEBUG("status qualifier:\n"); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, + (char *) &fsf_req->qtcb->header.fsf_status_qual, + sizeof (union fsf_status_qual)); + debug_text_event(fsf_req->adapter->erp_dbf, 1, + "fsf_s_phand_nv"); + zfcp_erp_adapter_reopen(port->adapter, 0); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_ADAPTER_STATUS_AVAILABLE: + ZFCP_LOG_FLAGS(2, "FSF_ADAPTER_STATUS_AVAILABLE\n"); + /* Note: FSF has actually closed the port in this case. + * The status code is just daft. Fingers crossed for a change + */ + retval = 0; + break; + + case FSF_GOOD: + ZFCP_LOG_FLAGS(3, "FSF_GOOD\n"); + ZFCP_LOG_TRACE("remote port 0x016%Lx on adapter %s closed, " + "port handle 0x%x\n", port->wwpn, + zfcp_get_busid_by_port(port), port->handle); + zfcp_erp_modify_port_status(port, + ZFCP_STATUS_COMMON_OPEN, + ZFCP_CLEAR); + retval = 0; + break; + + default: + ZFCP_LOG_NORMAL("bug: An unknown FSF Status was presented " + "(debug info 0x%x)\n", + fsf_req->qtcb->header.fsf_status); + debug_text_event(fsf_req->adapter->erp_dbf, 0, "fsf_s_inval:"); + debug_exception(fsf_req->adapter->erp_dbf, 0, + &fsf_req->qtcb->header.fsf_status, + sizeof (u32)); + break; + } + + skip_fsfstatus: + atomic_clear_mask(ZFCP_STATUS_COMMON_CLOSING, &port->status); + return retval; +} + +/* + * function: zfcp_fsf_close_physical_port + * + * purpose: submit FSF command "close physical port" + * + * returns: address of initiated FSF request + * NULL - request could not be initiated + */ +int +zfcp_fsf_close_physical_port(struct zfcp_erp_action *erp_action) +{ + int retval = 0; + unsigned long lock_flags; + volatile struct qdio_buffer_element *sbale; + + /* setup new FSF request */ + retval = zfcp_fsf_req_create(erp_action->adapter, + FSF_QTCB_CLOSE_PHYSICAL_PORT, + ZFCP_WAIT_FOR_SBAL | ZFCP_REQ_AUTO_CLEANUP, + erp_action->adapter->pool.fsf_req_erp, + &lock_flags, &erp_action->fsf_req); + if (retval < 0) { + ZFCP_LOG_INFO("error: Could not create close physical port " + "request (adapter %s, port 0x%016Lx)\n", + zfcp_get_busid_by_adapter(erp_action->adapter), + erp_action->port->wwpn); + + goto out; + } + + sbale = zfcp_qdio_sbale_req(erp_action->fsf_req, + erp_action->fsf_req->sbal_curr, 0); + sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; + sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; + + /* mark port as being closed */ + atomic_set_mask(ZFCP_STATUS_PORT_PHYS_CLOSING, + &erp_action->port->status); + /* save a pointer to this port */ + erp_action->fsf_req->data.close_physical_port.port = erp_action->port; + /* port to be closeed */ + erp_action->fsf_req->qtcb->header.port_handle = + erp_action->port->handle; + erp_action->fsf_req->erp_action = erp_action; + + /* start QDIO request for this FSF request */ + retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer); + if (retval) { + ZFCP_LOG_INFO("error: Could not send close physical port " + "request (adapter %s, port 0x%016Lx)\n", + zfcp_get_busid_by_adapter(erp_action->adapter), + erp_action->port->wwpn); + zfcp_fsf_req_free(erp_action->fsf_req); + erp_action->fsf_req = NULL; + goto out; + } + + ZFCP_LOG_TRACE("close physical port request initiated " + "(adapter %s, port 0x%016Lx)\n", + zfcp_get_busid_by_adapter(erp_action->adapter), + erp_action->port->wwpn); + out: + write_unlock_irqrestore(&erp_action->adapter->request_queue.queue_lock, + lock_flags); + return retval; +} + +/* + * function: zfcp_fsf_close_physical_port_handler + * + * purpose: is called for finished Close Physical Port FSF command + * + * returns: + */ +static int +zfcp_fsf_close_physical_port_handler(struct zfcp_fsf_req *fsf_req) +{ + int retval = -EINVAL; + struct zfcp_port *port; + struct zfcp_unit *unit; + struct fsf_qtcb_header *header; + u16 subtable, rule, counter; + + port = fsf_req->data.close_physical_port.port; + header = &fsf_req->qtcb->header; + + if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) { + /* don't change port status in our bookkeeping */ + goto skip_fsfstatus; + } + + /* evaluate FSF status in QTCB */ + switch (header->fsf_status) { + + case FSF_PORT_HANDLE_NOT_VALID: + ZFCP_LOG_FLAGS(1, "FSF_PORT_HANDLE_NOT_VALID\n"); + ZFCP_LOG_INFO("Temporary port identifier 0x%x invalid" + "(adapter %s, port 0x%016Lx). " + "This may happen occasionally.\n", + port->handle, + zfcp_get_busid_by_port(port), + port->wwpn); + ZFCP_LOG_DEBUG("status qualifier:\n"); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, + (char *) &header->fsf_status_qual, + sizeof (union fsf_status_qual)); + debug_text_event(fsf_req->adapter->erp_dbf, 1, + "fsf_s_phand_nv"); + zfcp_erp_adapter_reopen(port->adapter, 0); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_ACCESS_DENIED: + ZFCP_LOG_FLAGS(2, "FSF_ACCESS_DENIED\n"); + ZFCP_LOG_NORMAL("Access denied, cannot close " + "physical port 0x%016Lx on adapter %s\n", + port->wwpn, zfcp_get_busid_by_port(port)); + for (counter = 0; counter < 2; counter++) { + subtable = header->fsf_status_qual.halfword[counter * 2]; + rule = header->fsf_status_qual.halfword[counter * 2 + 1]; + switch (subtable) { + case FSF_SQ_CFDC_SUBTABLE_OS: + case FSF_SQ_CFDC_SUBTABLE_PORT_WWPN: + case FSF_SQ_CFDC_SUBTABLE_PORT_DID: + case FSF_SQ_CFDC_SUBTABLE_LUN: + ZFCP_LOG_INFO("Access denied (%s rule %d)\n", + zfcp_act_subtable_type[subtable], rule); + break; + } + } + debug_text_event(fsf_req->adapter->erp_dbf, 1, "fsf_s_access"); + zfcp_erp_port_access_denied(port); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_PORT_BOXED: + ZFCP_LOG_FLAGS(2, "FSF_PORT_BOXED\n"); + ZFCP_LOG_DEBUG("The remote port 0x%016Lx on adapter " + "%s needs to be reopened but it was attempted " + "to close it physically.\n", + port->wwpn, + zfcp_get_busid_by_port(port)); + debug_text_event(fsf_req->adapter->erp_dbf, 1, "fsf_s_pboxed"); + zfcp_erp_port_reopen(port, 0); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR | + ZFCP_STATUS_FSFREQ_RETRY; + break; + + case FSF_ADAPTER_STATUS_AVAILABLE: + ZFCP_LOG_FLAGS(2, "FSF_ADAPTER_STATUS_AVAILABLE\n"); + switch (header->fsf_status_qual.word[0]) { + case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE: + ZFCP_LOG_FLAGS(2, + "FSF_SQ_INVOKE_LINK_TEST_PROCEDURE\n"); + debug_text_event(fsf_req->adapter->erp_dbf, 1, + "fsf_sq_ltest"); + /* This will now be escalated by ERP */ + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED: + ZFCP_LOG_FLAGS(2, + "FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED\n"); + /* ERP strategy will escalate */ + debug_text_event(fsf_req->adapter->erp_dbf, 1, + "fsf_sq_ulp"); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + default: + ZFCP_LOG_NORMAL + ("bug: Wrong status qualifier 0x%x arrived.\n", + header->fsf_status_qual.word[0]); + debug_text_event(fsf_req->adapter->erp_dbf, 0, + "fsf_sq_inval:"); + debug_exception( + fsf_req->adapter->erp_dbf, 0, + &header->fsf_status_qual.word[0], sizeof (u32)); + break; + } + break; + + case FSF_GOOD: + ZFCP_LOG_FLAGS(3, "FSF_GOOD\n"); + ZFCP_LOG_DEBUG("Remote port 0x%016Lx via adapter %s " + "physically closed, port handle 0x%x\n", + port->wwpn, + zfcp_get_busid_by_port(port), port->handle); + /* can't use generic zfcp_erp_modify_port_status because + * ZFCP_STATUS_COMMON_OPEN must not be reset for the port + */ + atomic_clear_mask(ZFCP_STATUS_PORT_PHYS_OPEN, &port->status); + list_for_each_entry(unit, &port->unit_list_head, list) + atomic_clear_mask(ZFCP_STATUS_COMMON_OPEN, &unit->status); + retval = 0; + break; + + default: + ZFCP_LOG_NORMAL("bug: An unknown FSF Status was presented " + "(debug info 0x%x)\n", + header->fsf_status); + debug_text_event(fsf_req->adapter->erp_dbf, 0, "fsf_s_inval:"); + debug_exception(fsf_req->adapter->erp_dbf, 0, + &header->fsf_status, sizeof (u32)); + break; + } + + skip_fsfstatus: + atomic_clear_mask(ZFCP_STATUS_PORT_PHYS_CLOSING, &port->status); + return retval; +} + +/* + * function: zfcp_fsf_open_unit + * + * purpose: + * + * returns: + * + * assumptions: This routine does not check whether the associated + * remote port has already been opened. This should be + * done by calling routines. Otherwise some status + * may be presented by FSF + */ +int +zfcp_fsf_open_unit(struct zfcp_erp_action *erp_action) +{ + volatile struct qdio_buffer_element *sbale; + unsigned long lock_flags; + int retval = 0; + + /* setup new FSF request */ + retval = zfcp_fsf_req_create(erp_action->adapter, + FSF_QTCB_OPEN_LUN, + ZFCP_WAIT_FOR_SBAL | ZFCP_REQ_AUTO_CLEANUP, + erp_action->adapter->pool.fsf_req_erp, + &lock_flags, &(erp_action->fsf_req)); + if (retval < 0) { + ZFCP_LOG_INFO("error: Could not create open unit request for " + "unit 0x%016Lx on port 0x%016Lx on adapter %s.\n", + erp_action->unit->fcp_lun, + erp_action->unit->port->wwpn, + zfcp_get_busid_by_adapter(erp_action->adapter)); + goto out; + } + + sbale = zfcp_qdio_sbale_req(erp_action->fsf_req, + erp_action->fsf_req->sbal_curr, 0); + sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; + sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; + + erp_action->fsf_req->qtcb->header.port_handle = + erp_action->port->handle; + erp_action->fsf_req->qtcb->bottom.support.fcp_lun = + erp_action->unit->fcp_lun; + erp_action->fsf_req->qtcb->bottom.support.option = + FSF_OPEN_LUN_SUPPRESS_BOXING; + atomic_set_mask(ZFCP_STATUS_COMMON_OPENING, &erp_action->unit->status); + erp_action->fsf_req->data.open_unit.unit = erp_action->unit; + erp_action->fsf_req->erp_action = erp_action; + + /* start QDIO request for this FSF request */ + retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer); + if (retval) { + ZFCP_LOG_INFO("error: Could not send an open unit request " + "on the adapter %s, port 0x%016Lx for " + "unit 0x%016Lx\n", + zfcp_get_busid_by_adapter(erp_action->adapter), + erp_action->port->wwpn, + erp_action->unit->fcp_lun); + zfcp_fsf_req_free(erp_action->fsf_req); + erp_action->fsf_req = NULL; + goto out; + } + + ZFCP_LOG_TRACE("Open LUN request initiated (adapter %s, " + "port 0x%016Lx, unit 0x%016Lx)\n", + zfcp_get_busid_by_adapter(erp_action->adapter), + erp_action->port->wwpn, erp_action->unit->fcp_lun); + out: + write_unlock_irqrestore(&erp_action->adapter->request_queue.queue_lock, + lock_flags); + return retval; +} + +/* + * function: zfcp_fsf_open_unit_handler + * + * purpose: is called for finished Open LUN command + * + * returns: + */ +static int +zfcp_fsf_open_unit_handler(struct zfcp_fsf_req *fsf_req) +{ + int retval = -EINVAL; + struct zfcp_adapter *adapter; + struct zfcp_unit *unit; + struct fsf_qtcb_header *header; + struct fsf_qtcb_bottom_support *bottom; + struct fsf_queue_designator *queue_designator; + u16 subtable, rule, counter; + u32 allowed, exclusive, readwrite; + + unit = fsf_req->data.open_unit.unit; + + if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) { + /* don't change unit status in our bookkeeping */ + goto skip_fsfstatus; + } + + adapter = fsf_req->adapter; + header = &fsf_req->qtcb->header; + bottom = &fsf_req->qtcb->bottom.support; + queue_designator = &header->fsf_status_qual.fsf_queue_designator; + + allowed = bottom->lun_access_info & FSF_UNIT_ACCESS_OPEN_LUN_ALLOWED; + exclusive = bottom->lun_access_info & FSF_UNIT_ACCESS_EXCLUSIVE; + readwrite = bottom->lun_access_info & FSF_UNIT_ACCESS_OUTBOUND_TRANSFER; + + atomic_clear_mask(ZFCP_STATUS_COMMON_ACCESS_DENIED | + ZFCP_STATUS_UNIT_SHARED | + ZFCP_STATUS_UNIT_READONLY, + &unit->status); + + /* evaluate FSF status in QTCB */ + switch (header->fsf_status) { + + case FSF_PORT_HANDLE_NOT_VALID: + ZFCP_LOG_FLAGS(1, "FSF_PORT_HANDLE_NOT_VALID\n"); + ZFCP_LOG_INFO("Temporary port identifier 0x%x " + "for port 0x%016Lx on adapter %s invalid " + "This may happen occasionally\n", + unit->port->handle, + unit->port->wwpn, zfcp_get_busid_by_unit(unit)); + ZFCP_LOG_DEBUG("status qualifier:\n"); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, + (char *) &header->fsf_status_qual, + sizeof (union fsf_status_qual)); + debug_text_event(adapter->erp_dbf, 1, "fsf_s_ph_nv"); + zfcp_erp_adapter_reopen(unit->port->adapter, 0); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_LUN_ALREADY_OPEN: + ZFCP_LOG_FLAGS(0, "FSF_LUN_ALREADY_OPEN\n"); + ZFCP_LOG_NORMAL("bug: Attempted to open unit 0x%016Lx on " + "remote port 0x%016Lx on adapter %s twice.\n", + unit->fcp_lun, + unit->port->wwpn, zfcp_get_busid_by_unit(unit)); + debug_text_exception(adapter->erp_dbf, 0, + "fsf_s_uopen"); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_ACCESS_DENIED: + ZFCP_LOG_FLAGS(2, "FSF_ACCESS_DENIED\n"); + ZFCP_LOG_NORMAL("Access denied, cannot open unit 0x%016Lx on " + "remote port 0x%016Lx on adapter %s\n", + unit->fcp_lun, unit->port->wwpn, + zfcp_get_busid_by_unit(unit)); + for (counter = 0; counter < 2; counter++) { + subtable = header->fsf_status_qual.halfword[counter * 2]; + rule = header->fsf_status_qual.halfword[counter * 2 + 1]; + switch (subtable) { + case FSF_SQ_CFDC_SUBTABLE_OS: + case FSF_SQ_CFDC_SUBTABLE_PORT_WWPN: + case FSF_SQ_CFDC_SUBTABLE_PORT_DID: + case FSF_SQ_CFDC_SUBTABLE_LUN: + ZFCP_LOG_INFO("Access denied (%s rule %d)\n", + zfcp_act_subtable_type[subtable], rule); + break; + } + } + debug_text_event(adapter->erp_dbf, 1, "fsf_s_access"); + zfcp_erp_unit_access_denied(unit); + atomic_clear_mask(ZFCP_STATUS_UNIT_SHARED, &unit->status); + atomic_clear_mask(ZFCP_STATUS_UNIT_READONLY, &unit->status); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_PORT_BOXED: + ZFCP_LOG_FLAGS(2, "FSF_PORT_BOXED\n"); + ZFCP_LOG_DEBUG("The remote port 0x%016Lx on adapter %s " + "needs to be reopened\n", + unit->port->wwpn, zfcp_get_busid_by_unit(unit)); + debug_text_event(adapter->erp_dbf, 2, "fsf_s_pboxed"); + zfcp_erp_port_reopen(unit->port, 0); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR | + ZFCP_STATUS_FSFREQ_RETRY; + break; + + case FSF_LUN_SHARING_VIOLATION: + ZFCP_LOG_FLAGS(2, "FSF_LUN_SHARING_VIOLATION\n"); + if (header->fsf_status_qual.word[0] != 0) { + ZFCP_LOG_NORMAL("FCP-LUN 0x%Lx at the remote port " + "with WWPN 0x%Lx " + "connected to the adapter %s " + "is already in use in LPAR%d, CSS%d\n", + unit->fcp_lun, + unit->port->wwpn, + zfcp_get_busid_by_unit(unit), + queue_designator->hla, + queue_designator->cssid); + } else { + subtable = header->fsf_status_qual.halfword[4]; + rule = header->fsf_status_qual.halfword[5]; + switch (subtable) { + case FSF_SQ_CFDC_SUBTABLE_OS: + case FSF_SQ_CFDC_SUBTABLE_PORT_WWPN: + case FSF_SQ_CFDC_SUBTABLE_PORT_DID: + case FSF_SQ_CFDC_SUBTABLE_LUN: + ZFCP_LOG_NORMAL("Access to FCP-LUN 0x%Lx at the " + "remote port with WWPN 0x%Lx " + "connected to the adapter %s " + "is denied (%s rule %d)\n", + unit->fcp_lun, + unit->port->wwpn, + zfcp_get_busid_by_unit(unit), + zfcp_act_subtable_type[subtable], + rule); + break; + } + } + ZFCP_LOG_DEBUG("status qualifier:\n"); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, + (char *) &header->fsf_status_qual, + sizeof (union fsf_status_qual)); + debug_text_event(adapter->erp_dbf, 2, + "fsf_s_l_sh_vio"); + zfcp_erp_unit_access_denied(unit); + atomic_clear_mask(ZFCP_STATUS_UNIT_SHARED, &unit->status); + atomic_clear_mask(ZFCP_STATUS_UNIT_READONLY, &unit->status); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_MAXIMUM_NUMBER_OF_LUNS_EXCEEDED: + ZFCP_LOG_FLAGS(1, "FSF_MAXIMUM_NUMBER_OF_LUNS_EXCEEDED\n"); + ZFCP_LOG_INFO("error: The adapter ran out of resources. " + "There is no handle (temporary port identifier) " + "available for unit 0x%016Lx on port 0x%016Lx " + "on adapter %s\n", + unit->fcp_lun, + unit->port->wwpn, + zfcp_get_busid_by_unit(unit)); + debug_text_event(adapter->erp_dbf, 1, + "fsf_s_max_units"); + zfcp_erp_unit_failed(unit); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_ADAPTER_STATUS_AVAILABLE: + ZFCP_LOG_FLAGS(2, "FSF_ADAPTER_STATUS_AVAILABLE\n"); + switch (header->fsf_status_qual.word[0]) { + case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE: + ZFCP_LOG_FLAGS(2, + "FSF_SQ_INVOKE_LINK_TEST_PROCEDURE\n"); + /* Re-establish link to port */ + debug_text_event(adapter->erp_dbf, 1, + "fsf_sq_ltest"); + zfcp_erp_port_reopen(unit->port, 0); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED: + ZFCP_LOG_FLAGS(2, + "FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED\n"); + /* ERP strategy will escalate */ + debug_text_event(adapter->erp_dbf, 1, + "fsf_sq_ulp"); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + default: + ZFCP_LOG_NORMAL + ("bug: Wrong status qualifier 0x%x arrived.\n", + header->fsf_status_qual.word[0]); + debug_text_event(adapter->erp_dbf, 0, + "fsf_sq_inval:"); + debug_exception(adapter->erp_dbf, 0, + &header->fsf_status_qual.word[0], + sizeof (u32)); + } + break; + + case FSF_INVALID_COMMAND_OPTION: + ZFCP_LOG_FLAGS(2, "FSF_INVALID_COMMAND_OPTION\n"); + ZFCP_LOG_NORMAL( + "Invalid option 0x%x has been specified " + "in QTCB bottom sent to the adapter %s\n", + bottom->option, + zfcp_get_busid_by_adapter(adapter)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + retval = -EINVAL; + break; + + case FSF_GOOD: + ZFCP_LOG_FLAGS(3, "FSF_GOOD\n"); + /* save LUN handle assigned by FSF */ + unit->handle = header->lun_handle; + ZFCP_LOG_TRACE("unit 0x%016Lx on remote port 0x%016Lx on " + "adapter %s opened, port handle 0x%x\n", + unit->fcp_lun, + unit->port->wwpn, + zfcp_get_busid_by_unit(unit), + unit->handle); + /* mark unit as open */ + atomic_set_mask(ZFCP_STATUS_COMMON_OPEN, &unit->status); + + if (adapter->supported_features & FSF_FEATURE_LUN_SHARING){ + if (!exclusive) + atomic_set_mask(ZFCP_STATUS_UNIT_SHARED, + &unit->status); + + if (!readwrite) { + atomic_set_mask(ZFCP_STATUS_UNIT_READONLY, + &unit->status); + ZFCP_LOG_NORMAL("read-only access for unit " + "(adapter %s, wwpn=0x%016Lx, " + "fcp_lun=0x%016Lx)\n", + zfcp_get_busid_by_unit(unit), + unit->port->wwpn, + unit->fcp_lun); + } + + if (exclusive && !readwrite) { + ZFCP_LOG_NORMAL("exclusive access of read-only " + "unit not supported\n"); + zfcp_erp_unit_failed(unit); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + zfcp_erp_unit_shutdown(unit, 0); + } else if (!exclusive && readwrite) { + ZFCP_LOG_NORMAL("shared access of read-write " + "unit not supported\n"); + zfcp_erp_unit_failed(unit); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + zfcp_erp_unit_shutdown(unit, 0); + } + } + + retval = 0; + break; + + default: + ZFCP_LOG_NORMAL("bug: An unknown FSF Status was presented " + "(debug info 0x%x)\n", + header->fsf_status); + debug_text_event(adapter->erp_dbf, 0, "fsf_s_inval:"); + debug_exception(adapter->erp_dbf, 0, + &header->fsf_status, sizeof (u32)); + break; + } + + skip_fsfstatus: + atomic_clear_mask(ZFCP_STATUS_COMMON_OPENING, &unit->status); + return retval; +} + +/* + * function: zfcp_fsf_close_unit + * + * purpose: + * + * returns: address of fsf_req - request successfully initiated + * NULL - + * + * assumptions: This routine does not check whether the associated + * remote port/lun has already been opened. This should be + * done by calling routines. Otherwise some status + * may be presented by FSF + */ +int +zfcp_fsf_close_unit(struct zfcp_erp_action *erp_action) +{ + volatile struct qdio_buffer_element *sbale; + unsigned long lock_flags; + int retval = 0; + + /* setup new FSF request */ + retval = zfcp_fsf_req_create(erp_action->adapter, + FSF_QTCB_CLOSE_LUN, + ZFCP_WAIT_FOR_SBAL | ZFCP_REQ_AUTO_CLEANUP, + erp_action->adapter->pool.fsf_req_erp, + &lock_flags, &(erp_action->fsf_req)); + if (retval < 0) { + ZFCP_LOG_INFO("error: Could not create close unit request for " + "unit 0x%016Lx on port 0x%016Lx on adapter %s.\n", + erp_action->unit->fcp_lun, + erp_action->port->wwpn, + zfcp_get_busid_by_adapter(erp_action->adapter)); + goto out; + } + + sbale = zfcp_qdio_sbale_req(erp_action->fsf_req, + erp_action->fsf_req->sbal_curr, 0); + sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; + sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; + + erp_action->fsf_req->qtcb->header.port_handle = + erp_action->port->handle; + erp_action->fsf_req->qtcb->header.lun_handle = erp_action->unit->handle; + atomic_set_mask(ZFCP_STATUS_COMMON_CLOSING, &erp_action->unit->status); + erp_action->fsf_req->data.close_unit.unit = erp_action->unit; + erp_action->fsf_req->erp_action = erp_action; + + /* start QDIO request for this FSF request */ + retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer); + if (retval) { + ZFCP_LOG_INFO("error: Could not send a close unit request for " + "unit 0x%016Lx on port 0x%016Lx onadapter %s.\n", + erp_action->unit->fcp_lun, + erp_action->port->wwpn, + zfcp_get_busid_by_adapter(erp_action->adapter)); + zfcp_fsf_req_free(erp_action->fsf_req); + erp_action->fsf_req = NULL; + goto out; + } + + ZFCP_LOG_TRACE("Close LUN request initiated (adapter %s, " + "port 0x%016Lx, unit 0x%016Lx)\n", + zfcp_get_busid_by_adapter(erp_action->adapter), + erp_action->port->wwpn, erp_action->unit->fcp_lun); + out: + write_unlock_irqrestore(&erp_action->adapter->request_queue.queue_lock, + lock_flags); + return retval; +} + +/* + * function: zfcp_fsf_close_unit_handler + * + * purpose: is called for finished Close LUN FSF command + * + * returns: + */ +static int +zfcp_fsf_close_unit_handler(struct zfcp_fsf_req *fsf_req) +{ + int retval = -EINVAL; + struct zfcp_unit *unit; + + unit = fsf_req->data.close_unit.unit; /* restore unit */ + + if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) { + /* don't change unit status in our bookkeeping */ + goto skip_fsfstatus; + } + + /* evaluate FSF status in QTCB */ + switch (fsf_req->qtcb->header.fsf_status) { + + case FSF_PORT_HANDLE_NOT_VALID: + ZFCP_LOG_FLAGS(1, "FSF_PORT_HANDLE_NOT_VALID\n"); + ZFCP_LOG_INFO("Temporary port identifier 0x%x for port " + "0x%016Lx on adapter %s invalid. This may " + "happen in rare circumstances\n", + unit->port->handle, + unit->port->wwpn, + zfcp_get_busid_by_unit(unit)); + ZFCP_LOG_DEBUG("status qualifier:\n"); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, + (char *) &fsf_req->qtcb->header.fsf_status_qual, + sizeof (union fsf_status_qual)); + debug_text_event(fsf_req->adapter->erp_dbf, 1, + "fsf_s_phand_nv"); + zfcp_erp_adapter_reopen(unit->port->adapter, 0); + zfcp_cmd_dbf_event_fsf("porthinv", fsf_req, + &fsf_req->qtcb->header.fsf_status_qual, + sizeof (union fsf_status_qual)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_LUN_HANDLE_NOT_VALID: + ZFCP_LOG_FLAGS(1, "FSF_LUN_HANDLE_NOT_VALID\n"); + ZFCP_LOG_INFO("Temporary LUN identifier 0x%x of unit " + "0x%016Lx on port 0x%016Lx on adapter %s is " + "invalid. This may happen occasionally.\n", + unit->handle, + unit->fcp_lun, + unit->port->wwpn, + zfcp_get_busid_by_unit(unit)); + ZFCP_LOG_DEBUG("Status qualifier data:\n"); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, + (char *) &fsf_req->qtcb->header.fsf_status_qual, + sizeof (union fsf_status_qual)); + debug_text_event(fsf_req->adapter->erp_dbf, 1, + "fsf_s_lhand_nv"); + zfcp_erp_port_reopen(unit->port, 0); + zfcp_cmd_dbf_event_fsf("lunhinv", fsf_req, + &fsf_req->qtcb->header.fsf_status_qual, + sizeof (union fsf_status_qual)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_PORT_BOXED: + ZFCP_LOG_FLAGS(2, "FSF_PORT_BOXED\n"); + ZFCP_LOG_DEBUG("The remote port 0x%016Lx on adapter %s " + "needs to be reopened\n", + unit->port->wwpn, + zfcp_get_busid_by_unit(unit)); + debug_text_event(fsf_req->adapter->erp_dbf, 2, "fsf_s_pboxed"); + zfcp_erp_port_reopen(unit->port, 0); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR | + ZFCP_STATUS_FSFREQ_RETRY; + break; + + case FSF_ADAPTER_STATUS_AVAILABLE: + ZFCP_LOG_FLAGS(2, "FSF_ADAPTER_STATUS_AVAILABLE\n"); + switch (fsf_req->qtcb->header.fsf_status_qual.word[0]) { + case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE: + ZFCP_LOG_FLAGS(2, + "FSF_SQ_INVOKE_LINK_TEST_PROCEDURE\n"); + /* re-establish link to port */ + debug_text_event(fsf_req->adapter->erp_dbf, 1, + "fsf_sq_ltest"); + zfcp_erp_port_reopen(unit->port, 0); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED: + ZFCP_LOG_FLAGS(2, + "FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED\n"); + /* ERP strategy will escalate */ + debug_text_event(fsf_req->adapter->erp_dbf, 1, + "fsf_sq_ulp"); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + default: + ZFCP_LOG_NORMAL + ("bug: Wrong status qualifier 0x%x arrived.\n", + fsf_req->qtcb->header.fsf_status_qual.word[0]); + debug_text_event(fsf_req->adapter->erp_dbf, 0, + "fsf_sq_inval:"); + debug_exception( + fsf_req->adapter->erp_dbf, 0, + &fsf_req->qtcb->header.fsf_status_qual.word[0], + sizeof (u32)); + break; + } + break; + + case FSF_GOOD: + ZFCP_LOG_FLAGS(3, "FSF_GOOD\n"); + ZFCP_LOG_TRACE("unit 0x%016Lx on port 0x%016Lx on adapter %s " + "closed, port handle 0x%x\n", + unit->fcp_lun, + unit->port->wwpn, + zfcp_get_busid_by_unit(unit), + unit->handle); + /* mark unit as closed */ + atomic_clear_mask(ZFCP_STATUS_COMMON_OPEN, &unit->status); + retval = 0; + break; + + default: + ZFCP_LOG_NORMAL("bug: An unknown FSF Status was presented " + "(debug info 0x%x)\n", + fsf_req->qtcb->header.fsf_status); + debug_text_event(fsf_req->adapter->erp_dbf, 0, "fsf_s_inval:"); + debug_exception(fsf_req->adapter->erp_dbf, 0, + &fsf_req->qtcb->header.fsf_status, + sizeof (u32)); + break; + } + + skip_fsfstatus: + atomic_clear_mask(ZFCP_STATUS_COMMON_CLOSING, &unit->status); + return retval; +} + +/** + * zfcp_fsf_send_fcp_command_task - initiate an FCP command (for a SCSI command) + * @adapter: adapter where scsi command is issued + * @unit: unit where command is sent to + * @scsi_cmnd: scsi command to be sent + * @timer: timer to be started when request is initiated + * @req_flags: flags for fsf_request + */ +int +zfcp_fsf_send_fcp_command_task(struct zfcp_adapter *adapter, + struct zfcp_unit *unit, + struct scsi_cmnd * scsi_cmnd, + struct timer_list *timer, int req_flags) +{ + struct zfcp_fsf_req *fsf_req = NULL; + struct fcp_cmnd_iu *fcp_cmnd_iu; + unsigned int sbtype; + unsigned long lock_flags; + int real_bytes = 0; + int retval = 0; + int mask; + + /* setup new FSF request */ + retval = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags, + adapter->pool.fsf_req_scsi, + &lock_flags, &fsf_req); + if (unlikely(retval < 0)) { + ZFCP_LOG_DEBUG("error: Could not create FCP command request " + "for unit 0x%016Lx on port 0x%016Lx on " + "adapter %s\n", + unit->fcp_lun, + unit->port->wwpn, + zfcp_get_busid_by_adapter(adapter)); + goto failed_req_create; + } + + /* + * associate FSF request with SCSI request + * (need this for look up on abort) + */ + fsf_req->data.send_fcp_command_task.fsf_req = fsf_req; + scsi_cmnd->host_scribble = (char *) &(fsf_req->data); + + /* + * associate SCSI command with FSF request + * (need this for look up on normal command completion) + */ + fsf_req->data.send_fcp_command_task.scsi_cmnd = scsi_cmnd; + fsf_req->data.send_fcp_command_task.start_jiffies = jiffies; + fsf_req->data.send_fcp_command_task.unit = unit; + ZFCP_LOG_DEBUG("unit=%p, fcp_lun=0x%016Lx\n", unit, unit->fcp_lun); + + /* set handles of unit and its parent port in QTCB */ + fsf_req->qtcb->header.lun_handle = unit->handle; + fsf_req->qtcb->header.port_handle = unit->port->handle; + + /* FSF does not define the structure of the FCP_CMND IU */ + fcp_cmnd_iu = (struct fcp_cmnd_iu *) + &(fsf_req->qtcb->bottom.io.fcp_cmnd); + + /* + * set depending on data direction: + * data direction bits in SBALE (SB Type) + * data direction bits in QTCB + * data direction bits in FCP_CMND IU + */ + switch (scsi_cmnd->sc_data_direction) { + case DMA_NONE: + ZFCP_LOG_FLAGS(3, "DMA_NONE\n"); + fsf_req->qtcb->bottom.io.data_direction = FSF_DATADIR_CMND; + /* + * FIXME(qdio): + * what is the correct type for commands + * without 'real' data buffers? + */ + sbtype = SBAL_FLAGS0_TYPE_READ; + break; + case DMA_FROM_DEVICE: + ZFCP_LOG_FLAGS(3, "DMA_FROM_DEVICE\n"); + fsf_req->qtcb->bottom.io.data_direction = FSF_DATADIR_READ; + sbtype = SBAL_FLAGS0_TYPE_READ; + fcp_cmnd_iu->rddata = 1; + break; + case DMA_TO_DEVICE: + ZFCP_LOG_FLAGS(3, "DMA_TO_DEVICE\n"); + fsf_req->qtcb->bottom.io.data_direction = FSF_DATADIR_WRITE; + sbtype = SBAL_FLAGS0_TYPE_WRITE; + fcp_cmnd_iu->wddata = 1; + break; + case DMA_BIDIRECTIONAL: + ZFCP_LOG_FLAGS(0, "DMA_BIDIRECTIONAL not supported\n"); + default: + /* + * dummy, catch this condition earlier + * in zfcp_scsi_queuecommand + */ + goto failed_scsi_cmnd; + } + + /* set FC service class in QTCB (3 per default) */ + fsf_req->qtcb->bottom.io.service_class = adapter->fc_service_class; + + /* set FCP_LUN in FCP_CMND IU in QTCB */ + fcp_cmnd_iu->fcp_lun = unit->fcp_lun; + + mask = ZFCP_STATUS_UNIT_READONLY | ZFCP_STATUS_UNIT_SHARED; + + /* set task attributes in FCP_CMND IU in QTCB */ + if (likely((scsi_cmnd->device->simple_tags) || + (atomic_test_mask(mask, &unit->status)))) + fcp_cmnd_iu->task_attribute = SIMPLE_Q; + else + fcp_cmnd_iu->task_attribute = UNTAGGED; + + /* set additional length of FCP_CDB in FCP_CMND IU in QTCB, if needed */ + if (unlikely(scsi_cmnd->cmd_len > FCP_CDB_LENGTH)) { + fcp_cmnd_iu->add_fcp_cdb_length + = (scsi_cmnd->cmd_len - FCP_CDB_LENGTH) >> 2; + ZFCP_LOG_TRACE("SCSI CDB length is 0x%x, " + "additional FCP_CDB length is 0x%x " + "(shifted right 2 bits)\n", + scsi_cmnd->cmd_len, + fcp_cmnd_iu->add_fcp_cdb_length); + } + /* + * copy SCSI CDB (including additional length, if any) to + * FCP_CDB in FCP_CMND IU in QTCB + */ + memcpy(fcp_cmnd_iu->fcp_cdb, scsi_cmnd->cmnd, scsi_cmnd->cmd_len); + + /* FCP CMND IU length in QTCB */ + fsf_req->qtcb->bottom.io.fcp_cmnd_length = + sizeof (struct fcp_cmnd_iu) + + fcp_cmnd_iu->add_fcp_cdb_length + sizeof (fcp_dl_t); + + /* generate SBALEs from data buffer */ + real_bytes = zfcp_qdio_sbals_from_scsicmnd(fsf_req, sbtype, scsi_cmnd); + if (unlikely(real_bytes < 0)) { + if (fsf_req->sbal_number < ZFCP_MAX_SBALS_PER_REQ) { + ZFCP_LOG_DEBUG( + "Data did not fit into available buffer(s), " + "waiting for more...\n"); + retval = -EIO; + } else { + ZFCP_LOG_NORMAL("error: No truncation implemented but " + "required. Shutting down unit " + "(adapter %s, port 0x%016Lx, " + "unit 0x%016Lx)\n", + zfcp_get_busid_by_unit(unit), + unit->port->wwpn, + unit->fcp_lun); + zfcp_erp_unit_shutdown(unit, 0); + retval = -EINVAL; + } + goto no_fit; + } + + /* set length of FCP data length in FCP_CMND IU in QTCB */ + zfcp_set_fcp_dl(fcp_cmnd_iu, real_bytes); + + ZFCP_LOG_DEBUG("Sending SCSI command:\n"); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, + (char *) scsi_cmnd->cmnd, scsi_cmnd->cmd_len); + + /* + * start QDIO request for this FSF request + * covered by an SBALE) + */ + retval = zfcp_fsf_req_send(fsf_req, timer); + if (unlikely(retval < 0)) { + ZFCP_LOG_INFO("error: Could not send FCP command request " + "on adapter %s, port 0x%016Lx, unit 0x%016Lx\n", + zfcp_get_busid_by_adapter(adapter), + unit->port->wwpn, + unit->fcp_lun); + goto send_failed; + } + + ZFCP_LOG_TRACE("Send FCP Command initiated (adapter %s, " + "port 0x%016Lx, unit 0x%016Lx)\n", + zfcp_get_busid_by_adapter(adapter), + unit->port->wwpn, + unit->fcp_lun); + goto success; + + send_failed: + no_fit: + failed_scsi_cmnd: + zfcp_fsf_req_free(fsf_req); + fsf_req = NULL; + scsi_cmnd->host_scribble = NULL; + success: + failed_req_create: + write_unlock_irqrestore(&adapter->request_queue.queue_lock, lock_flags); + return retval; +} + +/* + * function: zfcp_fsf_send_fcp_command_task_management + * + * purpose: + * + * returns: + * + * FIXME(design): should be watched by a timeout!!! + * FIXME(design) shouldn't this be modified to return an int + * also...don't know how though + * + */ +struct zfcp_fsf_req * +zfcp_fsf_send_fcp_command_task_management(struct zfcp_adapter *adapter, + struct zfcp_unit *unit, + u8 tm_flags, int req_flags) +{ + struct zfcp_fsf_req *fsf_req = NULL; + int retval = 0; + struct fcp_cmnd_iu *fcp_cmnd_iu; + unsigned long lock_flags; + volatile struct qdio_buffer_element *sbale; + + /* setup new FSF request */ + retval = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags, + adapter->pool.fsf_req_scsi, + &lock_flags, &fsf_req); + if (retval < 0) { + ZFCP_LOG_INFO("error: Could not create FCP command (task " + "management) request for adapter %s, port " + " 0x%016Lx, unit 0x%016Lx.\n", + zfcp_get_busid_by_adapter(adapter), + unit->port->wwpn, unit->fcp_lun); + goto out; + } + + /* + * Used to decide on proper handler in the return path, + * could be either zfcp_fsf_send_fcp_command_task_handler or + * zfcp_fsf_send_fcp_command_task_management_handler */ + + fsf_req->status |= ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT; + + /* + * hold a pointer to the unit being target of this + * task management request + */ + fsf_req->data.send_fcp_command_task_management.unit = unit; + + /* set FSF related fields in QTCB */ + fsf_req->qtcb->header.lun_handle = unit->handle; + fsf_req->qtcb->header.port_handle = unit->port->handle; + fsf_req->qtcb->bottom.io.data_direction = FSF_DATADIR_CMND; + fsf_req->qtcb->bottom.io.service_class = adapter->fc_service_class; + fsf_req->qtcb->bottom.io.fcp_cmnd_length = + sizeof (struct fcp_cmnd_iu) + sizeof (fcp_dl_t); + + sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0); + sbale[0].flags |= SBAL_FLAGS0_TYPE_WRITE; + sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; + + /* set FCP related fields in FCP_CMND IU in QTCB */ + fcp_cmnd_iu = (struct fcp_cmnd_iu *) + &(fsf_req->qtcb->bottom.io.fcp_cmnd); + fcp_cmnd_iu->fcp_lun = unit->fcp_lun; + fcp_cmnd_iu->task_management_flags = tm_flags; + + /* start QDIO request for this FSF request */ + zfcp_fsf_start_scsi_er_timer(adapter); + retval = zfcp_fsf_req_send(fsf_req, NULL); + if (retval) { + del_timer(&adapter->scsi_er_timer); + ZFCP_LOG_INFO("error: Could not send an FCP-command (task " + "management) on adapter %s, port 0x%016Lx for " + "unit LUN 0x%016Lx\n", + zfcp_get_busid_by_adapter(adapter), + unit->port->wwpn, + unit->fcp_lun); + zfcp_fsf_req_free(fsf_req); + fsf_req = NULL; + goto out; + } + + ZFCP_LOG_TRACE("Send FCP Command (task management function) initiated " + "(adapter %s, port 0x%016Lx, unit 0x%016Lx, " + "tm_flags=0x%x)\n", + zfcp_get_busid_by_adapter(adapter), + unit->port->wwpn, + unit->fcp_lun, + tm_flags); + out: + write_unlock_irqrestore(&adapter->request_queue.queue_lock, lock_flags); + return fsf_req; +} + +/* + * function: zfcp_fsf_send_fcp_command_handler + * + * purpose: is called for finished Send FCP Command + * + * returns: + */ +static int +zfcp_fsf_send_fcp_command_handler(struct zfcp_fsf_req *fsf_req) +{ + int retval = -EINVAL; + struct zfcp_unit *unit; + struct fsf_qtcb_header *header; + u16 subtable, rule, counter; + + header = &fsf_req->qtcb->header; + + if (unlikely(fsf_req->status & ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT)) + unit = fsf_req->data.send_fcp_command_task_management.unit; + else + unit = fsf_req->data.send_fcp_command_task.unit; + + if (unlikely(fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR)) { + /* go directly to calls of special handlers */ + goto skip_fsfstatus; + } + + /* evaluate FSF status in QTCB */ + switch (header->fsf_status) { + + case FSF_PORT_HANDLE_NOT_VALID: + ZFCP_LOG_FLAGS(1, "FSF_PORT_HANDLE_NOT_VALID\n"); + ZFCP_LOG_INFO("Temporary port identifier 0x%x for port " + "0x%016Lx on adapter %s invalid\n", + unit->port->handle, + unit->port->wwpn, zfcp_get_busid_by_unit(unit)); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, + (char *) &header->fsf_status_qual, + sizeof (union fsf_status_qual)); + debug_text_event(fsf_req->adapter->erp_dbf, 1, + "fsf_s_phand_nv"); + zfcp_erp_adapter_reopen(unit->port->adapter, 0); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_LUN_HANDLE_NOT_VALID: + ZFCP_LOG_FLAGS(1, "FSF_LUN_HANDLE_NOT_VALID\n"); + ZFCP_LOG_INFO("Temporary LUN identifier 0x%x for unit " + "0x%016Lx on port 0x%016Lx on adapter %s is " + "invalid. This may happen occasionally.\n", + unit->handle, + unit->fcp_lun, + unit->port->wwpn, + zfcp_get_busid_by_unit(unit)); + ZFCP_LOG_NORMAL("Status qualifier data:\n"); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL, + (char *) &header->fsf_status_qual, + sizeof (union fsf_status_qual)); + debug_text_event(fsf_req->adapter->erp_dbf, 1, + "fsf_s_uhand_nv"); + zfcp_erp_port_reopen(unit->port, 0); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_HANDLE_MISMATCH: + ZFCP_LOG_FLAGS(0, "FSF_HANDLE_MISMATCH\n"); + ZFCP_LOG_NORMAL("bug: The port handle 0x%x has changed " + "unexpectedly. (adapter %s, port 0x%016Lx, " + "unit 0x%016Lx)\n", + unit->port->handle, + zfcp_get_busid_by_unit(unit), + unit->port->wwpn, + unit->fcp_lun); + ZFCP_LOG_NORMAL("status qualifier:\n"); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL, + (char *) &header->fsf_status_qual, + sizeof (union fsf_status_qual)); + debug_text_event(fsf_req->adapter->erp_dbf, 1, + "fsf_s_hand_mis"); + zfcp_erp_adapter_reopen(unit->port->adapter, 0); + zfcp_cmd_dbf_event_fsf("handmism", + fsf_req, + &header->fsf_status_qual, + sizeof (union fsf_status_qual)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_SERVICE_CLASS_NOT_SUPPORTED: + ZFCP_LOG_FLAGS(0, "FSF_SERVICE_CLASS_NOT_SUPPORTED\n"); + if (fsf_req->adapter->fc_service_class <= 3) { + ZFCP_LOG_NORMAL("error: The adapter %s does " + "not support fibrechannel class %d.\n", + zfcp_get_busid_by_unit(unit), + fsf_req->adapter->fc_service_class); + } else { + ZFCP_LOG_NORMAL("bug: The fibrechannel class at " + "adapter %s is invalid. " + "(debug info %d)\n", + zfcp_get_busid_by_unit(unit), + fsf_req->adapter->fc_service_class); + } + /* stop operation for this adapter */ + debug_text_exception(fsf_req->adapter->erp_dbf, 0, + "fsf_s_class_nsup"); + zfcp_erp_adapter_shutdown(unit->port->adapter, 0); + zfcp_cmd_dbf_event_fsf("unsclass", + fsf_req, + &header->fsf_status_qual, + sizeof (union fsf_status_qual)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_FCPLUN_NOT_VALID: + ZFCP_LOG_FLAGS(0, "FSF_FCPLUN_NOT_VALID\n"); + ZFCP_LOG_NORMAL("bug: unit 0x%016Lx on port 0x%016Lx on " + "adapter %s does not have correct unit " + "handle 0x%x\n", + unit->fcp_lun, + unit->port->wwpn, + zfcp_get_busid_by_unit(unit), + unit->handle); + ZFCP_LOG_DEBUG("status qualifier:\n"); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, + (char *) &header->fsf_status_qual, + sizeof (union fsf_status_qual)); + debug_text_event(fsf_req->adapter->erp_dbf, 1, + "fsf_s_fcp_lun_nv"); + zfcp_erp_port_reopen(unit->port, 0); + zfcp_cmd_dbf_event_fsf("fluninv", + fsf_req, + &header->fsf_status_qual, + sizeof (union fsf_status_qual)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_ACCESS_DENIED: + ZFCP_LOG_FLAGS(2, "FSF_ACCESS_DENIED\n"); + ZFCP_LOG_NORMAL("Access denied, cannot send FCP command to " + "unit 0x%016Lx on port 0x%016Lx on " + "adapter %s\n", unit->fcp_lun, unit->port->wwpn, + zfcp_get_busid_by_unit(unit)); + for (counter = 0; counter < 2; counter++) { + subtable = header->fsf_status_qual.halfword[counter * 2]; + rule = header->fsf_status_qual.halfword[counter * 2 + 1]; + switch (subtable) { + case FSF_SQ_CFDC_SUBTABLE_OS: + case FSF_SQ_CFDC_SUBTABLE_PORT_WWPN: + case FSF_SQ_CFDC_SUBTABLE_PORT_DID: + case FSF_SQ_CFDC_SUBTABLE_LUN: + ZFCP_LOG_INFO("Access denied (%s rule %d)\n", + zfcp_act_subtable_type[subtable], rule); + break; + } + } + debug_text_event(fsf_req->adapter->erp_dbf, 1, "fsf_s_access"); + zfcp_erp_unit_access_denied(unit); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_DIRECTION_INDICATOR_NOT_VALID: + ZFCP_LOG_FLAGS(0, "FSF_DIRECTION_INDICATOR_NOT_VALID\n"); + ZFCP_LOG_INFO("bug: Invalid data direction given for unit " + "0x%016Lx on port 0x%016Lx on adapter %s " + "(debug info %d)\n", + unit->fcp_lun, + unit->port->wwpn, + zfcp_get_busid_by_unit(unit), + fsf_req->qtcb->bottom.io.data_direction); + /* stop operation for this adapter */ + debug_text_event(fsf_req->adapter->erp_dbf, 0, + "fsf_s_dir_ind_nv"); + zfcp_erp_adapter_shutdown(unit->port->adapter, 0); + zfcp_cmd_dbf_event_fsf("dirinv", + fsf_req, + &header->fsf_status_qual, + sizeof (union fsf_status_qual)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_CMND_LENGTH_NOT_VALID: + ZFCP_LOG_FLAGS(0, "FSF_CMND_LENGTH_NOT_VALID\n"); + ZFCP_LOG_NORMAL + ("bug: An invalid control-data-block length field " + "was found in a command for unit 0x%016Lx on port " + "0x%016Lx on adapter %s " "(debug info %d)\n", + unit->fcp_lun, unit->port->wwpn, + zfcp_get_busid_by_unit(unit), + fsf_req->qtcb->bottom.io.fcp_cmnd_length); + /* stop operation for this adapter */ + debug_text_event(fsf_req->adapter->erp_dbf, 0, + "fsf_s_cmd_len_nv"); + zfcp_erp_adapter_shutdown(unit->port->adapter, 0); + zfcp_cmd_dbf_event_fsf("cleninv", + fsf_req, + &header->fsf_status_qual, + sizeof (union fsf_status_qual)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + + case FSF_PORT_BOXED: + ZFCP_LOG_FLAGS(2, "FSF_PORT_BOXED\n"); + ZFCP_LOG_DEBUG("The remote port 0x%016Lx on adapter %s " + "needs to be reopened\n", + unit->port->wwpn, zfcp_get_busid_by_unit(unit)); + debug_text_event(fsf_req->adapter->erp_dbf, 2, "fsf_s_pboxed"); + zfcp_erp_port_reopen(unit->port, 0); + zfcp_cmd_dbf_event_fsf("portbox", fsf_req, + &header->fsf_status_qual, + sizeof (union fsf_status_qual)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR | + ZFCP_STATUS_FSFREQ_RETRY; + break; + + case FSF_LUN_BOXED: + ZFCP_LOG_FLAGS(0, "FSF_LUN_BOXED\n"); + ZFCP_LOG_NORMAL("unit needs to be reopened (adapter %s, " + "wwpn=0x%016Lx, fcp_lun=0x%016Lx)\n", + zfcp_get_busid_by_unit(unit), + unit->port->wwpn, unit->fcp_lun); + debug_text_event(fsf_req->adapter->erp_dbf, 1, "fsf_s_lboxed"); + zfcp_erp_unit_reopen(unit, 0); + zfcp_cmd_dbf_event_fsf("unitbox", fsf_req, + &header->fsf_status_qual, + sizeof(union fsf_status_qual)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR + | ZFCP_STATUS_FSFREQ_RETRY; + break; + + case FSF_ADAPTER_STATUS_AVAILABLE: + ZFCP_LOG_FLAGS(2, "FSF_ADAPTER_STATUS_AVAILABLE\n"); + switch (header->fsf_status_qual.word[0]) { + case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE: + ZFCP_LOG_FLAGS(2, + "FSF_SQ_INVOKE_LINK_TEST_PROCEDURE\n"); + /* re-establish link to port */ + debug_text_event(fsf_req->adapter->erp_dbf, 1, + "fsf_sq_ltest"); + zfcp_erp_port_reopen(unit->port, 0); + zfcp_cmd_dbf_event_fsf( + "sqltest", + fsf_req, + &header->fsf_status_qual, + sizeof (union fsf_status_qual)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED: + ZFCP_LOG_FLAGS(3, + "FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED\n"); + /* FIXME(hw) need proper specs for proper action */ + /* let scsi stack deal with retries and escalation */ + debug_text_event(fsf_req->adapter->erp_dbf, 1, + "fsf_sq_ulp"); + zfcp_cmd_dbf_event_fsf( + "sqdeperp", + fsf_req, + &header->fsf_status_qual, + sizeof (union fsf_status_qual)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + break; + default: + /* FIXME: shall we consider this a successful transfer? */ + ZFCP_LOG_NORMAL + ("bug: Wrong status qualifier 0x%x arrived.\n", + header->fsf_status_qual.word[0]); + debug_text_event(fsf_req->adapter->erp_dbf, 0, + "fsf_sq_inval:"); + debug_exception(fsf_req->adapter->erp_dbf, 0, + &header->fsf_status_qual.word[0], + sizeof(u32)); + break; + } + break; + + case FSF_GOOD: + ZFCP_LOG_FLAGS(3, "FSF_GOOD\n"); + break; + + case FSF_FCP_RSP_AVAILABLE: + ZFCP_LOG_FLAGS(2, "FSF_FCP_RSP_AVAILABLE\n"); + break; + + default: + debug_text_event(fsf_req->adapter->erp_dbf, 0, "fsf_s_inval:"); + debug_exception(fsf_req->adapter->erp_dbf, 0, + &header->fsf_status, sizeof(u32)); + break; + } + + skip_fsfstatus: + if (fsf_req->status & ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT) { + retval = + zfcp_fsf_send_fcp_command_task_management_handler(fsf_req); + } else { + retval = zfcp_fsf_send_fcp_command_task_handler(fsf_req); + } + return retval; +} + +/* + * function: zfcp_fsf_send_fcp_command_task_handler + * + * purpose: evaluates FCP_RSP IU + * + * returns: + */ +static int +zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *fsf_req) +{ + int retval = 0; + struct scsi_cmnd *scpnt; + struct fcp_rsp_iu *fcp_rsp_iu = (struct fcp_rsp_iu *) + &(fsf_req->qtcb->bottom.io.fcp_rsp); + struct fcp_cmnd_iu *fcp_cmnd_iu = (struct fcp_cmnd_iu *) + &(fsf_req->qtcb->bottom.io.fcp_cmnd); + u32 sns_len; + char *fcp_rsp_info = zfcp_get_fcp_rsp_info_ptr(fcp_rsp_iu); + unsigned long flags; + struct zfcp_unit *unit = fsf_req->data.send_fcp_command_task.unit; + + read_lock_irqsave(&fsf_req->adapter->abort_lock, flags); + scpnt = fsf_req->data.send_fcp_command_task.scsi_cmnd; + if (unlikely(!scpnt)) { + ZFCP_LOG_DEBUG + ("Command with fsf_req %p is not associated to " + "a scsi command anymore. Aborted?\n", fsf_req); + goto out; + } + if (unlikely(fsf_req->status & ZFCP_STATUS_FSFREQ_ABORTED)) { + /* FIXME: (design) mid-layer should handle DID_ABORT like + * DID_SOFT_ERROR by retrying the request for devices + * that allow retries. + */ + ZFCP_LOG_DEBUG("Setting DID_SOFT_ERROR and SUGGEST_RETRY\n"); + set_host_byte(&scpnt->result, DID_SOFT_ERROR); + set_driver_byte(&scpnt->result, SUGGEST_RETRY); + goto skip_fsfstatus; + } + + if (unlikely(fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR)) { + ZFCP_LOG_DEBUG("Setting DID_ERROR\n"); + set_host_byte(&scpnt->result, DID_ERROR); + goto skip_fsfstatus; + } + + /* set message byte of result in SCSI command */ + scpnt->result |= COMMAND_COMPLETE << 8; + + /* + * copy SCSI status code of FCP_STATUS of FCP_RSP IU to status byte + * of result in SCSI command + */ + scpnt->result |= fcp_rsp_iu->scsi_status; + if (unlikely(fcp_rsp_iu->scsi_status)) { + /* DEBUG */ + ZFCP_LOG_DEBUG("status for SCSI Command:\n"); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, + scpnt->cmnd, scpnt->cmd_len); + ZFCP_LOG_DEBUG("SCSI status code 0x%x\n", + fcp_rsp_iu->scsi_status); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, + (void *) fcp_rsp_iu, sizeof (struct fcp_rsp_iu)); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, + zfcp_get_fcp_sns_info_ptr(fcp_rsp_iu), + fcp_rsp_iu->fcp_sns_len); + } + + /* check FCP_RSP_INFO */ + if (unlikely(fcp_rsp_iu->validity.bits.fcp_rsp_len_valid)) { + ZFCP_LOG_DEBUG("rsp_len is valid\n"); + switch (fcp_rsp_info[3]) { + case RSP_CODE_GOOD: + ZFCP_LOG_FLAGS(3, "RSP_CODE_GOOD\n"); + /* ok, continue */ + ZFCP_LOG_TRACE("no failure or Task Management " + "Function complete\n"); + set_host_byte(&scpnt->result, DID_OK); + break; + case RSP_CODE_LENGTH_MISMATCH: + ZFCP_LOG_FLAGS(0, "RSP_CODE_LENGTH_MISMATCH\n"); + /* hardware bug */ + ZFCP_LOG_NORMAL("bug: FCP response code indictates " + "that the fibrechannel protocol data " + "length differs from the burst length. " + "The problem occured on unit 0x%016Lx " + "on port 0x%016Lx on adapter %s", + unit->fcp_lun, + unit->port->wwpn, + zfcp_get_busid_by_unit(unit)); + /* dump SCSI CDB as prepared by zfcp */ + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, + (char *) &fsf_req->qtcb-> + bottom.io.fcp_cmnd, FSF_FCP_CMND_SIZE); + zfcp_cmd_dbf_event_fsf("clenmis", fsf_req, NULL, 0); + set_host_byte(&scpnt->result, DID_ERROR); + goto skip_fsfstatus; + case RSP_CODE_FIELD_INVALID: + ZFCP_LOG_FLAGS(0, "RSP_CODE_FIELD_INVALID\n"); + /* driver or hardware bug */ + ZFCP_LOG_NORMAL("bug: FCP response code indictates " + "that the fibrechannel protocol data " + "fields were incorrectly set up. " + "The problem occured on the unit " + "0x%016Lx on port 0x%016Lx on " + "adapter %s", + unit->fcp_lun, + unit->port->wwpn, + zfcp_get_busid_by_unit(unit)); + /* dump SCSI CDB as prepared by zfcp */ + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, + (char *) &fsf_req->qtcb-> + bottom.io.fcp_cmnd, FSF_FCP_CMND_SIZE); + set_host_byte(&scpnt->result, DID_ERROR); + zfcp_cmd_dbf_event_fsf("codeinv", fsf_req, NULL, 0); + goto skip_fsfstatus; + case RSP_CODE_RO_MISMATCH: + ZFCP_LOG_FLAGS(0, "RSP_CODE_RO_MISMATCH\n"); + /* hardware bug */ + ZFCP_LOG_NORMAL("bug: The FCP response code indicates " + "that conflicting values for the " + "fibrechannel payload offset from the " + "header were found. " + "The problem occured on unit 0x%016Lx " + "on port 0x%016Lx on adapter %s.\n", + unit->fcp_lun, + unit->port->wwpn, + zfcp_get_busid_by_unit(unit)); + /* dump SCSI CDB as prepared by zfcp */ + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, + (char *) &fsf_req->qtcb-> + bottom.io.fcp_cmnd, FSF_FCP_CMND_SIZE); + zfcp_cmd_dbf_event_fsf("codemism", fsf_req, NULL, 0); + set_host_byte(&scpnt->result, DID_ERROR); + goto skip_fsfstatus; + default: + ZFCP_LOG_NORMAL("bug: An invalid FCP response " + "code was detected for a command. " + "The problem occured on the unit " + "0x%016Lx on port 0x%016Lx on " + "adapter %s (debug info 0x%x)\n", + unit->fcp_lun, + unit->port->wwpn, + zfcp_get_busid_by_unit(unit), + fcp_rsp_info[3]); + /* dump SCSI CDB as prepared by zfcp */ + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, + (char *) &fsf_req->qtcb-> + bottom.io.fcp_cmnd, FSF_FCP_CMND_SIZE); + zfcp_cmd_dbf_event_fsf("undeffcp", fsf_req, NULL, 0); + set_host_byte(&scpnt->result, DID_ERROR); + } + } + + /* check for sense data */ + if (unlikely(fcp_rsp_iu->validity.bits.fcp_sns_len_valid)) { + sns_len = FSF_FCP_RSP_SIZE - + sizeof (struct fcp_rsp_iu) + fcp_rsp_iu->fcp_rsp_len; + ZFCP_LOG_TRACE("room for %i bytes sense data in QTCB\n", + sns_len); + sns_len = min(sns_len, (u32) SCSI_SENSE_BUFFERSIZE); + ZFCP_LOG_TRACE("room for %i bytes sense data in SCSI command\n", + SCSI_SENSE_BUFFERSIZE); + sns_len = min(sns_len, fcp_rsp_iu->fcp_sns_len); + ZFCP_LOG_TRACE("scpnt->result =0x%x, command was:\n", + scpnt->result); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_TRACE, + (void *) &scpnt->cmnd, scpnt->cmd_len); + + ZFCP_LOG_TRACE("%i bytes sense data provided by FCP\n", + fcp_rsp_iu->fcp_sns_len); + memcpy(&scpnt->sense_buffer, + zfcp_get_fcp_sns_info_ptr(fcp_rsp_iu), sns_len); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_TRACE, + (void *) &scpnt->sense_buffer, sns_len); + } + + /* check for overrun */ + if (unlikely(fcp_rsp_iu->validity.bits.fcp_resid_over)) { + ZFCP_LOG_INFO("A data overrun was detected for a command. " + "unit 0x%016Lx, port 0x%016Lx, adapter %s. " + "The response data length is " + "%d, the original length was %d.\n", + unit->fcp_lun, + unit->port->wwpn, + zfcp_get_busid_by_unit(unit), + fcp_rsp_iu->fcp_resid, + (int) zfcp_get_fcp_dl(fcp_cmnd_iu)); + } + + /* check for underrun */ + if (unlikely(fcp_rsp_iu->validity.bits.fcp_resid_under)) { + ZFCP_LOG_INFO("A data underrun was detected for a command. " + "unit 0x%016Lx, port 0x%016Lx, adapter %s. " + "The response data length is " + "%d, the original length was %d.\n", + unit->fcp_lun, + unit->port->wwpn, + zfcp_get_busid_by_unit(unit), + fcp_rsp_iu->fcp_resid, + (int) zfcp_get_fcp_dl(fcp_cmnd_iu)); + + scpnt->resid = fcp_rsp_iu->fcp_resid; + if (scpnt->request_bufflen - scpnt->resid < scpnt->underflow) + scpnt->result |= DID_ERROR << 16; + } + + skip_fsfstatus: + ZFCP_LOG_DEBUG("scpnt->result =0x%x\n", scpnt->result); + + zfcp_cmd_dbf_event_scsi("response", scpnt); + + /* cleanup pointer (need this especially for abort) */ + scpnt->host_scribble = NULL; + + /* + * NOTE: + * according to the outcome of a discussion on linux-scsi we + * don't need to grab the io_request_lock here since we use + * the new eh + */ + /* always call back */ + + (scpnt->scsi_done) (scpnt); + + /* + * We must hold this lock until scsi_done has been called. + * Otherwise we may call scsi_done after abort regarding this + * command has completed. + * Note: scsi_done must not block! + */ + out: + read_unlock_irqrestore(&fsf_req->adapter->abort_lock, flags); + return retval; +} + +/* + * function: zfcp_fsf_send_fcp_command_task_management_handler + * + * purpose: evaluates FCP_RSP IU + * + * returns: + */ +static int +zfcp_fsf_send_fcp_command_task_management_handler(struct zfcp_fsf_req *fsf_req) +{ + int retval = 0; + struct fcp_rsp_iu *fcp_rsp_iu = (struct fcp_rsp_iu *) + &(fsf_req->qtcb->bottom.io.fcp_rsp); + char *fcp_rsp_info = zfcp_get_fcp_rsp_info_ptr(fcp_rsp_iu); + struct zfcp_unit *unit = + fsf_req->data.send_fcp_command_task_management.unit; + + del_timer(&fsf_req->adapter->scsi_er_timer); + if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) { + fsf_req->status |= ZFCP_STATUS_FSFREQ_TMFUNCFAILED; + goto skip_fsfstatus; + } + + /* check FCP_RSP_INFO */ + switch (fcp_rsp_info[3]) { + case RSP_CODE_GOOD: + ZFCP_LOG_FLAGS(3, "RSP_CODE_GOOD\n"); + /* ok, continue */ + ZFCP_LOG_DEBUG("no failure or Task Management " + "Function complete\n"); + break; + case RSP_CODE_TASKMAN_UNSUPP: + ZFCP_LOG_FLAGS(0, "RSP_CODE_TASKMAN_UNSUPP\n"); + ZFCP_LOG_NORMAL("bug: A reuested task management function " + "is not supported on the target device " + "unit 0x%016Lx, port 0x%016Lx, adapter %s\n ", + unit->fcp_lun, + unit->port->wwpn, + zfcp_get_busid_by_unit(unit)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_TMFUNCNOTSUPP; + break; + case RSP_CODE_TASKMAN_FAILED: + ZFCP_LOG_FLAGS(0, "RSP_CODE_TASKMAN_FAILED\n"); + ZFCP_LOG_NORMAL("bug: A reuested task management function " + "failed to complete successfully. " + "unit 0x%016Lx, port 0x%016Lx, adapter %s.\n", + unit->fcp_lun, + unit->port->wwpn, + zfcp_get_busid_by_unit(unit)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_TMFUNCFAILED; + break; + default: + ZFCP_LOG_NORMAL("bug: An invalid FCP response " + "code was detected for a command. " + "unit 0x%016Lx, port 0x%016Lx, adapter %s " + "(debug info 0x%x)\n", + unit->fcp_lun, + unit->port->wwpn, + zfcp_get_busid_by_unit(unit), + fcp_rsp_info[3]); + fsf_req->status |= ZFCP_STATUS_FSFREQ_TMFUNCFAILED; + } + + skip_fsfstatus: + return retval; +} + + +/* + * function: zfcp_fsf_control_file + * + * purpose: Initiator of the control file upload/download FSF requests + * + * returns: 0 - FSF request is successfuly created and queued + * -EOPNOTSUPP - The FCP adapter does not have Control File support + * -EINVAL - Invalid direction specified + * -ENOMEM - Insufficient memory + * -EPERM - Cannot create FSF request or place it in QDIO queue + */ +int +zfcp_fsf_control_file(struct zfcp_adapter *adapter, + struct zfcp_fsf_req **fsf_req_ptr, + u32 fsf_command, + u32 option, + struct zfcp_sg_list *sg_list) +{ + struct zfcp_fsf_req *fsf_req; + struct fsf_qtcb_bottom_support *bottom; + volatile struct qdio_buffer_element *sbale; + struct timer_list *timer; + unsigned long lock_flags; + int req_flags = 0; + int direction; + int retval = 0; + + if (!(adapter->supported_features & FSF_FEATURE_CFDC)) { + ZFCP_LOG_INFO("cfdc not supported (adapter %s)\n", + zfcp_get_busid_by_adapter(adapter)); + retval = -EOPNOTSUPP; + goto out; + } + + switch (fsf_command) { + + case FSF_QTCB_DOWNLOAD_CONTROL_FILE: + direction = SBAL_FLAGS0_TYPE_WRITE; + if ((option != FSF_CFDC_OPTION_FULL_ACCESS) && + (option != FSF_CFDC_OPTION_RESTRICTED_ACCESS)) + req_flags = ZFCP_WAIT_FOR_SBAL; + break; + + case FSF_QTCB_UPLOAD_CONTROL_FILE: + direction = SBAL_FLAGS0_TYPE_READ; + break; + + default: + ZFCP_LOG_INFO("Invalid FSF command code 0x%08x\n", fsf_command); + retval = -EINVAL; + goto out; + } + + timer = kmalloc(sizeof(struct timer_list), GFP_KERNEL); + if (!timer) { + retval = -ENOMEM; + goto out; + } + + retval = zfcp_fsf_req_create(adapter, fsf_command, req_flags, + NULL, &lock_flags, &fsf_req); + if (retval < 0) { + ZFCP_LOG_INFO("error: Could not create FSF request for the " + "adapter %s\n", + zfcp_get_busid_by_adapter(adapter)); + retval = -EPERM; + goto unlock_queue_lock; + } + + sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0); + sbale[0].flags |= direction; + + bottom = &fsf_req->qtcb->bottom.support; + bottom->operation_subtype = FSF_CFDC_OPERATION_SUBTYPE; + bottom->option = option; + + if (sg_list->count > 0) { + int bytes; + + bytes = zfcp_qdio_sbals_from_sg(fsf_req, direction, + sg_list->sg, sg_list->count, + ZFCP_MAX_SBALS_PER_REQ); + if (bytes != ZFCP_CFDC_MAX_CONTROL_FILE_SIZE) { + ZFCP_LOG_INFO( + "error: Could not create sufficient number of " + "SBALS for an FSF request to the adapter %s\n", + zfcp_get_busid_by_adapter(adapter)); + retval = -ENOMEM; + goto free_fsf_req; + } + } else + sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; + + init_timer(timer); + timer->function = zfcp_fsf_request_timeout_handler; + timer->data = (unsigned long) adapter; + timer->expires = ZFCP_FSF_REQUEST_TIMEOUT; + + retval = zfcp_fsf_req_send(fsf_req, timer); + if (retval < 0) { + ZFCP_LOG_INFO("initiation of cfdc up/download failed" + "(adapter %s)\n", + zfcp_get_busid_by_adapter(adapter)); + retval = -EPERM; + goto free_fsf_req; + } + write_unlock_irqrestore(&adapter->request_queue.queue_lock, lock_flags); + + ZFCP_LOG_NORMAL("Control file %s FSF request has been sent to the " + "adapter %s\n", + fsf_command == FSF_QTCB_DOWNLOAD_CONTROL_FILE ? + "download" : "upload", + zfcp_get_busid_by_adapter(adapter)); + + wait_event(fsf_req->completion_wq, + fsf_req->status & ZFCP_STATUS_FSFREQ_COMPLETED); + + *fsf_req_ptr = fsf_req; + del_timer_sync(timer); + goto free_timer; + + free_fsf_req: + zfcp_fsf_req_free(fsf_req); + unlock_queue_lock: + write_unlock_irqrestore(&adapter->request_queue.queue_lock, lock_flags); + free_timer: + kfree(timer); + out: + return retval; +} + + +/* + * function: zfcp_fsf_control_file_handler + * + * purpose: Handler of the control file upload/download FSF requests + * + * returns: 0 - FSF request successfuly processed + * -EAGAIN - Operation has to be repeated because of a temporary problem + * -EACCES - There is no permission to execute an operation + * -EPERM - The control file is not in a right format + * -EIO - There is a problem with the FCP adapter + * -EINVAL - Invalid operation + * -EFAULT - User space memory I/O operation fault + */ +static int +zfcp_fsf_control_file_handler(struct zfcp_fsf_req *fsf_req) +{ + struct zfcp_adapter *adapter = fsf_req->adapter; + struct fsf_qtcb_header *header = &fsf_req->qtcb->header; + struct fsf_qtcb_bottom_support *bottom = &fsf_req->qtcb->bottom.support; + int retval = 0; + + if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) { + retval = -EINVAL; + goto skip_fsfstatus; + } + + switch (header->fsf_status) { + + case FSF_GOOD: + ZFCP_LOG_FLAGS(2, "FSF_GOOD\n"); + ZFCP_LOG_NORMAL( + "The FSF request has been successfully completed " + "on the adapter %s\n", + zfcp_get_busid_by_adapter(adapter)); + break; + + case FSF_OPERATION_PARTIALLY_SUCCESSFUL: + ZFCP_LOG_FLAGS(2, "FSF_OPERATION_PARTIALLY_SUCCESSFUL\n"); + if (bottom->operation_subtype == FSF_CFDC_OPERATION_SUBTYPE) { + switch (header->fsf_status_qual.word[0]) { + + case FSF_SQ_CFDC_COULD_NOT_HARDEN_ON_SE: + ZFCP_LOG_NORMAL( + "CFDC of the adapter %s could not " + "be saved on the SE\n", + zfcp_get_busid_by_adapter(adapter)); + break; + + case FSF_SQ_CFDC_COULD_NOT_HARDEN_ON_SE2: + ZFCP_LOG_NORMAL( + "CFDC of the adapter %s could not " + "be copied to the secondary SE\n", + zfcp_get_busid_by_adapter(adapter)); + break; + + default: + ZFCP_LOG_NORMAL( + "CFDC could not be hardened " + "on the adapter %s\n", + zfcp_get_busid_by_adapter(adapter)); + } + } + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + retval = -EAGAIN; + break; + + case FSF_AUTHORIZATION_FAILURE: + ZFCP_LOG_FLAGS(2, "FSF_AUTHORIZATION_FAILURE\n"); + ZFCP_LOG_NORMAL( + "Adapter %s does not accept privileged commands\n", + zfcp_get_busid_by_adapter(adapter)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + retval = -EACCES; + break; + + case FSF_CFDC_ERROR_DETECTED: + ZFCP_LOG_FLAGS(2, "FSF_CFDC_ERROR_DETECTED\n"); + ZFCP_LOG_NORMAL( + "Error at position %d in the CFDC, " + "CFDC is discarded by the adapter %s\n", + header->fsf_status_qual.word[0], + zfcp_get_busid_by_adapter(adapter)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + retval = -EPERM; + break; + + case FSF_CONTROL_FILE_UPDATE_ERROR: + ZFCP_LOG_FLAGS(2, "FSF_CONTROL_FILE_UPDATE_ERROR\n"); + ZFCP_LOG_NORMAL( + "Adapter %s cannot harden the control file, " + "file is discarded\n", + zfcp_get_busid_by_adapter(adapter)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + retval = -EIO; + break; + + case FSF_CONTROL_FILE_TOO_LARGE: + ZFCP_LOG_FLAGS(2, "FSF_CONTROL_FILE_TOO_LARGE\n"); + ZFCP_LOG_NORMAL( + "Control file is too large, file is discarded " + "by the adapter %s\n", + zfcp_get_busid_by_adapter(adapter)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + retval = -EIO; + break; + + case FSF_ACCESS_CONFLICT_DETECTED: + ZFCP_LOG_FLAGS(2, "FSF_ACCESS_CONFLICT_DETECTED\n"); + if (bottom->operation_subtype == FSF_CFDC_OPERATION_SUBTYPE) + ZFCP_LOG_NORMAL( + "CFDC has been discarded by the adapter %s, " + "because activation would impact " + "%d active connection(s)\n", + zfcp_get_busid_by_adapter(adapter), + header->fsf_status_qual.word[0]); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + retval = -EIO; + break; + + case FSF_CONFLICTS_OVERRULED: + ZFCP_LOG_FLAGS(2, "FSF_CONFLICTS_OVERRULED\n"); + if (bottom->operation_subtype == FSF_CFDC_OPERATION_SUBTYPE) + ZFCP_LOG_NORMAL( + "CFDC has been activated on the adapter %s, " + "but activation has impacted " + "%d active connection(s)\n", + zfcp_get_busid_by_adapter(adapter), + header->fsf_status_qual.word[0]); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + retval = -EIO; + break; + + case FSF_UNKNOWN_OP_SUBTYPE: + ZFCP_LOG_FLAGS(2, "FSF_UNKNOWN_OP_SUBTYPE\n"); + ZFCP_LOG_NORMAL("unknown operation subtype (adapter: %s, " + "op_subtype=0x%x)\n", + zfcp_get_busid_by_adapter(adapter), + bottom->operation_subtype); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + retval = -EINVAL; + break; + + case FSF_INVALID_COMMAND_OPTION: + ZFCP_LOG_FLAGS(2, "FSF_INVALID_COMMAND_OPTION\n"); + ZFCP_LOG_NORMAL( + "Invalid option 0x%x has been specified " + "in QTCB bottom sent to the adapter %s\n", + bottom->option, + zfcp_get_busid_by_adapter(adapter)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + retval = -EINVAL; + break; + + default: + ZFCP_LOG_NORMAL( + "bug: An unknown/unexpected FSF status 0x%08x " + "was presented on the adapter %s\n", + header->fsf_status, + zfcp_get_busid_by_adapter(adapter)); + debug_text_event(fsf_req->adapter->erp_dbf, 0, "fsf_sq_inval"); + debug_exception(fsf_req->adapter->erp_dbf, 0, + &header->fsf_status_qual.word[0], sizeof(u32)); + fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; + retval = -EINVAL; + break; + } + +skip_fsfstatus: + return retval; +} + + +/* + * function: zfcp_fsf_req_wait_and_cleanup + * + * purpose: + * + * FIXME(design): signal seems to be <0 !!! + * returns: 0 - request completed (*status is valid), cleanup succ. + * <0 - request completed (*status is valid), cleanup failed + * >0 - signal which interrupted waiting (*status invalid), + * request not completed, no cleanup + * + * *status is a copy of status of completed fsf_req + */ +int +zfcp_fsf_req_wait_and_cleanup(struct zfcp_fsf_req *fsf_req, + int interruptible, u32 * status) +{ + int retval = 0; + int signal = 0; + + if (interruptible) { + __wait_event_interruptible(fsf_req->completion_wq, + fsf_req->status & + ZFCP_STATUS_FSFREQ_COMPLETED, + signal); + if (signal) { + ZFCP_LOG_DEBUG("Caught signal %i while waiting for the " + "completion of the request at %p\n", + signal, fsf_req); + retval = signal; + goto out; + } + } else { + __wait_event(fsf_req->completion_wq, + fsf_req->status & ZFCP_STATUS_FSFREQ_COMPLETED); + } + + *status = fsf_req->status; + + /* cleanup request */ + zfcp_fsf_req_cleanup(fsf_req); + out: + return retval; +} + +static inline int +zfcp_fsf_req_sbal_check(unsigned long *flags, + struct zfcp_qdio_queue *queue, int needed) +{ + write_lock_irqsave(&queue->queue_lock, *flags); + if (likely(atomic_read(&queue->free_count) >= needed)) + return 1; + write_unlock_irqrestore(&queue->queue_lock, *flags); + return 0; +} + +/* + * set qtcb pointer in fsf_req and initialize QTCB + */ +static inline void +zfcp_fsf_req_qtcb_init(struct zfcp_fsf_req *fsf_req, u32 fsf_cmd) +{ + if (likely(fsf_req->qtcb != NULL)) { + fsf_req->qtcb->prefix.req_id = (unsigned long)fsf_req; + fsf_req->qtcb->prefix.ulp_info = ZFCP_ULP_INFO_VERSION; + fsf_req->qtcb->prefix.qtcb_type = fsf_qtcb_type[fsf_cmd]; + fsf_req->qtcb->prefix.qtcb_version = ZFCP_QTCB_VERSION; + fsf_req->qtcb->header.req_handle = (unsigned long)fsf_req; + fsf_req->qtcb->header.fsf_command = fsf_cmd; + } +} + +/** + * zfcp_fsf_req_sbal_get - try to get one SBAL in the request queue + * @adapter: adapter for which request queue is examined + * @req_flags: flags indicating whether to wait for needed SBAL or not + * @lock_flags: lock_flags if queue_lock is taken + * Return: 0 on success, otherwise -EIO, or -ERESTARTSYS + * Locks: lock adapter->request_queue->queue_lock on success + */ +static int +zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter, int req_flags, + unsigned long *lock_flags) +{ + long ret; + struct zfcp_qdio_queue *req_queue = &adapter->request_queue; + + if (unlikely(req_flags & ZFCP_WAIT_FOR_SBAL)) { + ret = wait_event_interruptible_timeout(adapter->request_wq, + zfcp_fsf_req_sbal_check(lock_flags, req_queue, 1), + ZFCP_SBAL_TIMEOUT); + if (ret < 0) + return ret; + if (!ret) + return -EIO; + } else if (!zfcp_fsf_req_sbal_check(lock_flags, req_queue, 1)) + return -EIO; + + return 0; +} + +/* + * function: zfcp_fsf_req_create + * + * purpose: create an FSF request at the specified adapter and + * setup common fields + * + * returns: -ENOMEM if there was insufficient memory for a request + * -EIO if no qdio buffers could be allocate to the request + * -EINVAL/-EPERM on bug conditions in req_dequeue + * 0 in success + * + * note: The created request is returned by reference. + * + * locks: lock of concerned request queue must not be held, + * but is held on completion (write, irqsave) + */ +int +zfcp_fsf_req_create(struct zfcp_adapter *adapter, u32 fsf_cmd, int req_flags, + mempool_t *pool, unsigned long *lock_flags, + struct zfcp_fsf_req **fsf_req_p) +{ + volatile struct qdio_buffer_element *sbale; + struct zfcp_fsf_req *fsf_req = NULL; + int ret = 0; + struct zfcp_qdio_queue *req_queue = &adapter->request_queue; + + /* allocate new FSF request */ + fsf_req = zfcp_fsf_req_alloc(pool, req_flags); + if (unlikely(NULL == fsf_req)) { + ZFCP_LOG_DEBUG("error: Could not put an FSF request into" + "the outbound (send) queue.\n"); + ret = -ENOMEM; + goto failed_fsf_req; + } + + zfcp_fsf_req_qtcb_init(fsf_req, fsf_cmd); + + /* initialize waitqueue which may be used to wait on + this request completion */ + init_waitqueue_head(&fsf_req->completion_wq); + + ret = zfcp_fsf_req_sbal_get(adapter, req_flags, lock_flags); + if(ret < 0) { + goto failed_sbals; + } + + /* + * We hold queue_lock here. Check if QDIOUP is set and let request fail + * if it is not set (see also *_open_qdio and *_close_qdio). + */ + + if (!atomic_test_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &adapter->status)) { + write_unlock_irqrestore(&req_queue->queue_lock, *lock_flags); + ret = -EIO; + goto failed_sbals; + } + + fsf_req->adapter = adapter; /* pointer to "parent" adapter */ + fsf_req->fsf_command = fsf_cmd; + fsf_req->sbal_number = 1; + fsf_req->sbal_first = req_queue->free_index; + fsf_req->sbal_curr = req_queue->free_index; + fsf_req->sbale_curr = 1; + + if (likely(req_flags & ZFCP_REQ_AUTO_CLEANUP)) { + fsf_req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; + } + + sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0); + + /* setup common SBALE fields */ + sbale[0].addr = fsf_req; + sbale[0].flags |= SBAL_FLAGS0_COMMAND; + if (likely(fsf_req->qtcb != NULL)) { + sbale[1].addr = (void *) fsf_req->qtcb; + sbale[1].length = sizeof(struct fsf_qtcb); + } + + ZFCP_LOG_TRACE("got %i free BUFFERs starting at index %i\n", + fsf_req->sbal_number, fsf_req->sbal_first); + + goto success; + + failed_sbals: +/* dequeue new FSF request previously enqueued */ + zfcp_fsf_req_free(fsf_req); + fsf_req = NULL; + + failed_fsf_req: + write_lock_irqsave(&req_queue->queue_lock, *lock_flags); + success: + *fsf_req_p = fsf_req; + return ret; +} + +/* + * function: zfcp_fsf_req_send + * + * purpose: start transfer of FSF request via QDIO + * + * returns: 0 - request transfer succesfully started + * !0 - start of request transfer failed + */ +static int +zfcp_fsf_req_send(struct zfcp_fsf_req *fsf_req, struct timer_list *timer) +{ + struct zfcp_adapter *adapter; + struct zfcp_qdio_queue *req_queue; + volatile struct qdio_buffer_element *sbale; + int new_distance_from_int; + unsigned long flags; + int inc_seq_no = 1; + int retval = 0; + + adapter = fsf_req->adapter; + req_queue = &adapter->request_queue, + + + /* FIXME(debug): remove it later */ + sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_first, 0); + ZFCP_LOG_DEBUG("SBALE0 flags=0x%x\n", sbale[0].flags); + ZFCP_LOG_TRACE("HEX DUMP OF SBALE1 PAYLOAD:\n"); + ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_TRACE, (char *) sbale[1].addr, + sbale[1].length); + + /* set sequence counter in QTCB */ + if (likely(fsf_req->qtcb)) { + fsf_req->qtcb->prefix.req_seq_no = adapter->fsf_req_seq_no; + fsf_req->seq_no = adapter->fsf_req_seq_no; + ZFCP_LOG_TRACE("FSF request %p of adapter %s gets " + "FSF sequence counter value of %i\n", + fsf_req, + zfcp_get_busid_by_adapter(adapter), + fsf_req->qtcb->prefix.req_seq_no); + } else + inc_seq_no = 0; + + /* put allocated FSF request at list tail */ + write_lock_irqsave(&adapter->fsf_req_list_lock, flags); + list_add_tail(&fsf_req->list, &adapter->fsf_req_list_head); + write_unlock_irqrestore(&adapter->fsf_req_list_lock, flags); + + /* figure out expiration time of timeout and start timeout */ + if (unlikely(timer)) { + timer->expires += jiffies; + add_timer(timer); + } + + ZFCP_LOG_TRACE("request queue of adapter %s: " + "next free SBAL is %i, %i free SBALs\n", + zfcp_get_busid_by_adapter(adapter), + req_queue->free_index, + atomic_read(&req_queue->free_count)); + + ZFCP_LOG_DEBUG("calling do_QDIO adapter %s, flags=0x%x, queue_no=%i, " + "index_in_queue=%i, count=%i, buffers=%p\n", + zfcp_get_busid_by_adapter(adapter), + QDIO_FLAG_SYNC_OUTPUT, + 0, fsf_req->sbal_first, fsf_req->sbal_number, + &req_queue->buffer[fsf_req->sbal_first]); + + /* + * adjust the number of free SBALs in request queue as well as + * position of first one + */ + atomic_sub(fsf_req->sbal_number, &req_queue->free_count); + ZFCP_LOG_TRACE("free_count=%d\n", atomic_read(&req_queue->free_count)); + req_queue->free_index += fsf_req->sbal_number; /* increase */ + req_queue->free_index %= QDIO_MAX_BUFFERS_PER_Q; /* wrap if needed */ + new_distance_from_int = zfcp_qdio_determine_pci(req_queue, fsf_req); + + retval = do_QDIO(adapter->ccw_device, + QDIO_FLAG_SYNC_OUTPUT, + 0, fsf_req->sbal_first, fsf_req->sbal_number, NULL); + + if (unlikely(retval)) { + /* Queues are down..... */ + retval = -EIO; + /* + * FIXME(potential race): + * timer might be expired (absolutely unlikely) + */ + if (timer) + del_timer(timer); + write_lock_irqsave(&adapter->fsf_req_list_lock, flags); + list_del(&fsf_req->list); + write_unlock_irqrestore(&adapter->fsf_req_list_lock, flags); + /* + * adjust the number of free SBALs in request queue as well as + * position of first one + */ + zfcp_qdio_zero_sbals(req_queue->buffer, + fsf_req->sbal_first, fsf_req->sbal_number); + atomic_add(fsf_req->sbal_number, &req_queue->free_count); + req_queue->free_index -= fsf_req->sbal_number; /* increase */ + req_queue->free_index += QDIO_MAX_BUFFERS_PER_Q; + req_queue->free_index %= QDIO_MAX_BUFFERS_PER_Q; /* wrap */ + ZFCP_LOG_DEBUG + ("error: do_QDIO failed. Buffers could not be enqueued " + "to request queue.\n"); + } else { + req_queue->distance_from_int = new_distance_from_int; + /* + * increase FSF sequence counter - + * this must only be done for request successfully enqueued to + * QDIO this rejected requests may be cleaned up by calling + * routines resulting in missing sequence counter values + * otherwise, + */ + /* Don't increase for unsolicited status */ + if (likely(inc_seq_no)) { + adapter->fsf_req_seq_no++; + ZFCP_LOG_TRACE + ("FSF sequence counter value of adapter %s " + "increased to %i\n", + zfcp_get_busid_by_adapter(adapter), + adapter->fsf_req_seq_no); + } + /* count FSF requests pending */ + atomic_inc(&adapter->fsf_reqs_active); + } + return retval; +} + +/* + * function: zfcp_fsf_req_cleanup + * + * purpose: cleans up an FSF request and removes it from the specified list + * + * returns: + * + * assumption: no pending SB in SBALEs other than QTCB + */ +void +zfcp_fsf_req_cleanup(struct zfcp_fsf_req *fsf_req) +{ + struct zfcp_adapter *adapter = fsf_req->adapter; + unsigned long flags; + + write_lock_irqsave(&adapter->fsf_req_list_lock, flags); + list_del(&fsf_req->list); + write_unlock_irqrestore(&adapter->fsf_req_list_lock, flags); + zfcp_fsf_req_free(fsf_req); +} + +#undef ZFCP_LOG_AREA |