diff options
Diffstat (limited to 'drivers/rtc')
-rw-r--r-- | drivers/rtc/Kconfig | 48 | ||||
-rw-r--r-- | drivers/rtc/Makefile | 12 |
2 files changed, 30 insertions, 30 deletions
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index efaff368ee94..6db0a9d75f8d 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -12,7 +12,7 @@ menuconfig RTC_CLASS select RTC_LIB help Generic RTC class support. If you say yes here, you will - be allowed to plug one or more RTCs to your system. You will + be allowed to plug one or more RTCs to your system. You will probably want to enable one or more of the interfaces below. if RTC_CLASS @@ -165,10 +165,10 @@ config RTC_DRV_88PM80X will be called rtc-88pm80x. config RTC_DRV_ABB5ZES3 - depends on I2C - select REGMAP_I2C - tristate "Abracon AB-RTCMC-32.768kHz-B5ZE-S3" - help + depends on I2C + select REGMAP_I2C + tristate "Abracon AB-RTCMC-32.768kHz-B5ZE-S3" + help If you say yes here you get support for the Abracon AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC chip. @@ -376,10 +376,10 @@ config RTC_DRV_ISL12022 will be called rtc-isl12022. config RTC_DRV_ISL12057 - depends on I2C - select REGMAP_I2C - tristate "Intersil ISL12057" - help + depends on I2C + select REGMAP_I2C + tristate "Intersil ISL12057" + help If you say yes here you get support for the Intersil ISL12057 I2C RTC chip. @@ -614,13 +614,13 @@ comment "SPI RTC drivers" if SPI_MASTER config RTC_DRV_M41T93 - tristate "ST M41T93" - help - If you say yes here you will get support for the - ST M41T93 SPI RTC chip. + tristate "ST M41T93" + help + If you say yes here you will get support for the + ST M41T93 SPI RTC chip. - This driver can also be built as a module. If so, the module - will be called rtc-m41t93. + This driver can also be built as a module. If so, the module + will be called rtc-m41t93. config RTC_DRV_M41T94 tristate "ST M41T94" @@ -1211,7 +1211,7 @@ config RTC_DRV_SH Say Y here to enable support for the on-chip RTC found in most SuperH processors. - To compile this driver as a module, choose M here: the + To compile this driver as a module, choose M here: the module will be called rtc-sh. config RTC_DRV_VR41XX @@ -1310,14 +1310,14 @@ config RTC_DRV_GENERIC just say Y. config RTC_DRV_PXA - tristate "PXA27x/PXA3xx" - depends on ARCH_PXA - help - If you say Y here you will get access to the real time clock - built into your PXA27x or PXA3xx CPU. - - This RTC driver uses PXA RTC registers available since pxa27x - series (RDxR, RYxR) instead of legacy RCNR, RTAR. + tristate "PXA27x/PXA3xx" + depends on ARCH_PXA + help + If you say Y here you will get access to the real time clock + built into your PXA27x or PXA3xx CPU. + + This RTC driver uses PXA RTC registers available since pxa27x + series (RDxR, RYxR) instead of legacy RCNR, RTAR. config RTC_DRV_VT8500 tristate "VIA/WonderMedia 85xx SoC RTC" diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 5a893dd9e55d..5ea5370f56f2 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -14,14 +14,14 @@ ifdef CONFIG_RTC_DRV_EFI rtc-core-y += rtc-efi-platform.o endif -rtc-core-$(CONFIG_RTC_INTF_DEV) += rtc-dev.o -rtc-core-$(CONFIG_RTC_INTF_PROC) += rtc-proc.o -rtc-core-$(CONFIG_RTC_INTF_SYSFS) += rtc-sysfs.o +rtc-core-$(CONFIG_RTC_INTF_DEV) += rtc-dev.o +rtc-core-$(CONFIG_RTC_INTF_PROC) += rtc-proc.o +rtc-core-$(CONFIG_RTC_INTF_SYSFS) += rtc-sysfs.o # Keep the list ordered. obj-$(CONFIG_RTC_DRV_88PM80X) += rtc-88pm80x.o -obj-$(CONFIG_RTC_DRV_88PM860X) += rtc-88pm860x.o +obj-$(CONFIG_RTC_DRV_88PM860X) += rtc-88pm860x.o obj-$(CONFIG_RTC_DRV_AB3100) += rtc-ab3100.o obj-$(CONFIG_RTC_DRV_AB8500) += rtc-ab8500.o obj-$(CONFIG_RTC_DRV_ABB5ZES3) += rtc-ab-b5ze-s3.o @@ -57,7 +57,7 @@ obj-$(CONFIG_RTC_DRV_DS1553) += rtc-ds1553.o obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o obj-$(CONFIG_RTC_DRV_DS1685_FAMILY) += rtc-ds1685.o obj-$(CONFIG_RTC_DRV_DS1742) += rtc-ds1742.o -obj-$(CONFIG_RTC_DRV_DS2404) += rtc-ds2404.o +obj-$(CONFIG_RTC_DRV_DS2404) += rtc-ds2404.o obj-$(CONFIG_RTC_DRV_DS3232) += rtc-ds3232.o obj-$(CONFIG_RTC_DRV_DS3234) += rtc-ds3234.o obj-$(CONFIG_RTC_DRV_EFI) += rtc-efi.o @@ -85,7 +85,7 @@ obj-$(CONFIG_RTC_DRV_M48T86) += rtc-m48t86.o obj-$(CONFIG_RTC_DRV_MAX6900) += rtc-max6900.o obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o obj-$(CONFIG_RTC_DRV_MAX77686) += rtc-max77686.o -obj-$(CONFIG_RTC_DRV_MAX77802) += rtc-max77802.o +obj-$(CONFIG_RTC_DRV_MAX77802) += rtc-max77802.o obj-$(CONFIG_RTC_DRV_MAX8907) += rtc-max8907.o obj-$(CONFIG_RTC_DRV_MAX8925) += rtc-max8925.o obj-$(CONFIG_RTC_DRV_MAX8997) += rtc-max8997.o |