diff options
Diffstat (limited to 'drivers/rtc')
| -rw-r--r-- | drivers/rtc/Kconfig | 19 | ||||
| -rw-r--r-- | drivers/rtc/Makefile | 2 | ||||
| -rw-r--r-- | drivers/rtc/interface.c | 102 | ||||
| -rw-r--r-- | drivers/rtc/rtc-at32ap700x.c | 7 | ||||
| -rw-r--r-- | drivers/rtc/rtc-cmos.c | 31 | ||||
| -rw-r--r-- | drivers/rtc/rtc-ds1374.c | 2 | ||||
| -rw-r--r-- | drivers/rtc/rtc-fm3130.c | 501 | ||||
| -rw-r--r-- | drivers/rtc/rtc-ppc.c | 69 | ||||
| -rw-r--r-- | drivers/rtc/rtc-sa1100.c | 4 | ||||
| -rw-r--r-- | drivers/rtc/rtc-x1205.c | 111 |
10 files changed, 797 insertions, 51 deletions
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 6cc2c0330230..4949dc4859be 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -256,6 +256,17 @@ config RTC_DRV_S35390A This driver can also be built as a module. If so the module will be called rtc-s35390a. +config RTC_DRV_FM3130 + tristate "Ramtron FM3130" + help + If you say Y here you will get support for the + Ramtron FM3130 RTC chips. + Ramtron FM3130 is a chip with two separate devices inside, + RTC clock and FRAM. This driver provides only RTC functionality. + + This driver can also be built as a module. If so the module + will be called rtc-fm3130. + endif # I2C comment "SPI RTC drivers" @@ -534,4 +545,12 @@ config RTC_DRV_RS5C313 help If you say yes here you get support for the Ricoh RS5C313 RTC chips. +config RTC_DRV_PPC + tristate "PowerPC machine dependent RTC support" + depends on PPC_MERGE + help + The PowerPC kernel has machine-specific functions for accessing + the RTC. This exposes that functionality through the generic RTC + class. + endif # RTC_CLASS diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 872f1218ff9f..b6e14d51670b 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_RTC_DRV_DS1553) += rtc-ds1553.o obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o obj-$(CONFIG_RTC_DRV_DS1742) += rtc-ds1742.o obj-$(CONFIG_RTC_DRV_EP93XX) += rtc-ep93xx.o +obj-$(CONFIG_RTC_DRV_FM3130) += rtc-fm3130.o obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o obj-$(CONFIG_RTC_DRV_M41T80) += rtc-m41t80.o obj-$(CONFIG_RTC_DRV_M48T59) += rtc-m48t59.o @@ -41,6 +42,7 @@ obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o +obj-$(CONFIG_RTC_DRV_PPC) += rtc-ppc.o obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index 7e3ad4f3b343..58b7336640ff 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -126,12 +126,25 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) int err; struct rtc_time before, now; int first_time = 1; + unsigned long t_now, t_alm; + enum { none, day, month, year } missing = none; + unsigned days; - /* The lower level RTC driver may not be capable of filling - * in all fields of the rtc_time struct (eg. rtc-cmos), - * and so might instead return -1 in some fields. - * We deal with that here by grabbing a current RTC timestamp - * and using values from that for any missing (-1) values. + /* The lower level RTC driver may return -1 in some fields, + * creating invalid alarm->time values, for reasons like: + * + * - The hardware may not be capable of filling them in; + * many alarms match only on time-of-day fields, not + * day/month/year calendar data. + * + * - Some hardware uses illegal values as "wildcard" match + * values, which non-Linux firmware (like a BIOS) may try + * to set up as e.g. "alarm 15 minutes after each hour". + * Linux uses only oneshot alarms. + * + * When we see that here, we deal with it by using values from + * a current RTC timestamp for any missing (-1) values. The + * RTC driver prevents "periodic alarm" modes. * * But this can be racey, because some fields of the RTC timestamp * may have wrapped in the interval since we read the RTC alarm, @@ -174,6 +187,10 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) if (!alarm->enabled) return 0; + /* full-function RTCs won't have such missing fields */ + if (rtc_valid_tm(&alarm->time) == 0) + return 0; + /* get the "after" timestamp, to detect wrapped fields */ err = rtc_read_time(rtc, &now); if (err < 0) @@ -183,22 +200,85 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) } while ( before.tm_min != now.tm_min || before.tm_hour != now.tm_hour || before.tm_mon != now.tm_mon - || before.tm_year != now.tm_year - || before.tm_isdst != now.tm_isdst); + || before.tm_year != now.tm_year); - /* Fill in any missing alarm fields using the timestamp */ + /* Fill in the missing alarm fields using the timestamp; we + * know there's at least one since alarm->time is invalid. + */ if (alarm->time.tm_sec == -1) alarm->time.tm_sec = now.tm_sec; if (alarm->time.tm_min == -1) alarm->time.tm_min = now.tm_min; if (alarm->time.tm_hour == -1) alarm->time.tm_hour = now.tm_hour; - if (alarm->time.tm_mday == -1) + + /* For simplicity, only support date rollover for now */ + if (alarm->time.tm_mday == -1) { alarm->time.tm_mday = now.tm_mday; - if (alarm->time.tm_mon == -1) + missing = day; + } + if (alarm->time.tm_mon == -1) { alarm->time.tm_mon = now.tm_mon; - if (alarm->time.tm_year == -1) + if (missing == none) + missing = month; + } + if (alarm->time.tm_year == -1) { alarm->time.tm_year = now.tm_year; + if (missing == none) + missing = year; + } + + /* with luck, no rollover is needed */ + rtc_tm_to_time(&now, &t_now); + rtc_tm_to_time(&alarm->time, &t_alm); + if (t_now < t_alm) + goto done; + + switch (missing) { + + /* 24 hour rollover ... if it's now 10am Monday, an alarm that + * that will trigger at 5am will do so at 5am Tuesday, which + * could also be in the next month or year. This is a common + * case, especially for PCs. + */ + case day: + dev_dbg(&rtc->dev, "alarm rollover: %s\n", "day"); + t_alm += 24 * 60 * 60; + rtc_time_to_tm(t_alm, &alarm->time); + break; + + /* Month rollover ... if it's the 31th, an alarm on the 3rd will + * be next month. An alarm matching on the 30th, 29th, or 28th + * may end up in the month after that! Many newer PCs support + * this type of alarm. + */ + case month: + dev_dbg(&rtc->dev, "alarm rollover: %s\n", "month"); + do { + if (alarm->time.tm_mon < 11) + alarm->time.tm_mon++; + else { + alarm->time.tm_mon = 0; + alarm->time.tm_year++; + } + days = rtc_month_days(alarm->time.tm_mon, + alarm->time.tm_year); + } while (days < alarm->time.tm_mday); + break; + + /* Year rollover ... easy except for leap years! */ + case year: + dev_dbg(&rtc->dev, "alarm rollover: %s\n", "year"); + do { + alarm->time.tm_year++; + } while (!rtc_valid_tm(&alarm->time)); + break; + + default: + dev_warn(&rtc->dev, "alarm rollover not handled\n"); + } + +done: return 0; } EXPORT_SYMBOL_GPL(rtc_read_alarm); diff --git a/drivers/rtc/rtc-at32ap700x.c b/drivers/rtc/rtc-at32ap700x.c index 42244f14b41c..2ef8cdfda4a7 100644 --- a/drivers/rtc/rtc-at32ap700x.c +++ b/drivers/rtc/rtc-at32ap700x.c @@ -94,8 +94,11 @@ static int at32_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) { struct rtc_at32ap700x *rtc = dev_get_drvdata(dev); + spin_lock_irq(&rtc->lock); rtc_time_to_tm(rtc->alarm_time, &alrm->time); - alrm->pending = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0; + alrm->enabled = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0; + alrm->pending = rtc_readl(rtc, ISR) & RTC_BIT(ISR_TOPI) ? 1 : 0; + spin_unlock_irq(&rtc->lock); return 0; } @@ -119,7 +122,7 @@ static int at32_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) spin_lock_irq(&rtc->lock); rtc->alarm_time = alarm_unix_time; rtc_writel(rtc, TOP, rtc->alarm_time); - if (alrm->pending) + if (alrm->enabled) rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL) | RTC_BIT(CTRL_TOPEN)); else diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index d060a06ce05b..d7bb9bac71df 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -905,19 +905,7 @@ static struct pnp_driver cmos_pnp_driver = { .resume = cmos_pnp_resume, }; -static int __init cmos_init(void) -{ - return pnp_register_driver(&cmos_pnp_driver); -} -module_init(cmos_init); - -static void __exit cmos_exit(void) -{ - pnp_unregister_driver(&cmos_pnp_driver); -} -module_exit(cmos_exit); - -#else /* no PNP */ +#endif /* CONFIG_PNP */ /*----------------------------------------------------------------*/ @@ -958,20 +946,33 @@ static struct platform_driver cmos_platform_driver = { static int __init cmos_init(void) { +#ifdef CONFIG_PNP + if (pnp_platform_devices) + return pnp_register_driver(&cmos_pnp_driver); + else + return platform_driver_probe(&cmos_platform_driver, + cmos_platform_probe); +#else return platform_driver_probe(&cmos_platform_driver, cmos_platform_probe); +#endif /* CONFIG_PNP */ } module_init(cmos_init); static void __exit cmos_exit(void) { +#ifdef CONFIG_PNP + if (pnp_platform_devices) + pnp_unregister_driver(&cmos_pnp_driver); + else + platform_driver_unregister(&cmos_platform_driver); +#else platform_driver_unregister(&cmos_platform_driver); +#endif /* CONFIG_PNP */ } module_exit(cmos_exit); -#endif /* !PNP */ - MODULE_AUTHOR("David Brownell"); MODULE_DESCRIPTION("Driver for PC-style 'CMOS' RTCs"); MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c index fa2d2f8b3f4d..640acd20fdde 100644 --- a/drivers/rtc/rtc-ds1374.c +++ b/drivers/rtc/rtc-ds1374.c @@ -42,7 +42,7 @@ #define DS1374_REG_TCR 0x09 /* Trickle Charge */ static const struct i2c_device_id ds1374_id[] = { - { "rtc-ds1374", 0 }, + { "ds1374", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, ds1374_id); diff --git a/drivers/rtc/rtc-fm3130.c b/drivers/rtc/rtc-fm3130.c new file mode 100644 index 000000000000..11644c8fca82 --- /dev/null +++ b/drivers/rtc/rtc-fm3130.c @@ -0,0 +1,501 @@ +/* + * rtc-fm3130.c - RTC driver for Ramtron FM3130 I2C chip. + * + * Copyright (C) 2008 Sergey Lapin + * Based on ds1307 driver by James Chapman and David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/rtc.h> +#include <linux/bcd.h> + +#define FM3130_RTC_CONTROL (0x0) +#define FM3130_CAL_CONTROL (0x1) +#define FM3130_RTC_SECONDS (0x2) +#define FM3130_RTC_MINUTES (0x3) +#define FM3130_RTC_HOURS (0x4) +#define FM3130_RTC_DAY (0x5) +#define FM3130_RTC_DATE (0x6) +#define FM3130_RTC_MONTHS (0x7) +#define FM3130_RTC_YEARS (0x8) + +#define FM3130_ALARM_SECONDS (0x9) +#define FM3130_ALARM_MINUTES (0xa) +#define FM3130_ALARM_HOURS (0xb) +#define FM3130_ALARM_DATE (0xc) +#define FM3130_ALARM_MONTHS (0xd) +#define FM3130_ALARM_WP_CONTROL (0xe) + +#define FM3130_CAL_CONTROL_BIT_nOSCEN (1 << 7) /* Osciallator enabled */ +#define FM3130_RTC_CONTROL_BIT_LB (1 << 7) /* Low battery */ +#define FM3130_RTC_CONTROL_BIT_AF (1 << 6) /* Alarm flag */ +#define FM3130_RTC_CONTROL_BIT_CF (1 << 5) /* Century overflow */ +#define FM3130_RTC_CONTROL_BIT_POR (1 << 4) /* Power on reset */ +#define FM3130_RTC_CONTROL_BIT_AEN (1 << 3) /* Alarm enable */ +#define FM3130_RTC_CONTROL_BIT_CAL (1 << 2) /* Calibration mode */ +#define FM3130_RTC_CONTROL_BIT_WRITE (1 << 1) /* W=1 -> write mode W=0 normal */ +#define FM3130_RTC_CONTROL_BIT_READ (1 << 0) /* R=1 -> read mode R=0 normal */ + +#define FM3130_CLOCK_REGS 7 +#define FM3130_ALARM_REGS 5 + +struct fm3130 { + u8 reg_addr_time; + u8 reg_addr_alarm; + u8 regs[15]; + struct i2c_msg msg[4]; + struct i2c_client *client; + struct rtc_device *rtc; + int data_valid; + int alarm; +}; +static const struct i2c_device_id fm3130_id[] = { + { "fm3130-rtc", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, fm3130_id); + +#define FM3130_MODE_NORMAL 0 +#define FM3130_MODE_WRITE 1 +#define FM3130_MODE_READ 2 + +static void fm3130_rtc_mode(struct device *dev, int mode) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + + fm3130->regs[FM3130_RTC_CONTROL] = + i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL); + switch (mode) { + case FM3130_MODE_NORMAL: + fm3130->regs[FM3130_RTC_CONTROL] &= + ~(FM3130_RTC_CONTROL_BIT_WRITE | + FM3130_RTC_CONTROL_BIT_READ); + break; + case FM3130_MODE_WRITE: + fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_WRITE; + break; + case FM3130_MODE_READ: + fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_READ; + break; + default: + dev_dbg(dev, "invalid mode %d\n", mode); + break; + } + /* Checking for alarm */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) { + fm3130->alarm = 1; + fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF; + } + i2c_smbus_write_byte_data(fm3130->client, + FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL]); +} + +static int fm3130_get_time(struct device *dev, struct rtc_time *t) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + int tmp; + + if (!fm3130->data_valid) { + /* We have invalid data in RTC, probably due + to battery faults or other problems. Return EIO + for now, it will allow us to set data later insted + of error during probing which disables device */ + return -EIO; + } + fm3130_rtc_mode(dev, FM3130_MODE_READ); + + /* read the RTC date and time registers all at once */ + tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent), + fm3130->msg, 2); + if (tmp != 2) { + dev_err(dev, "%s error %d\n", "read", tmp); + return -EIO; + } + + fm3130_rtc_mode(dev, FM3130_MODE_NORMAL); + + dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x %02x" + "%02x %02x %02x %02x %02x %02x %02x\n", + "read", + fm3130->regs[0], fm3130->regs[1], + fm3130->regs[2], fm3130->regs[3], + fm3130->regs[4], fm3130->regs[5], + fm3130->regs[6], fm3130->regs[7], + fm3130->regs[8], fm3130->regs[9], + fm3130->regs[0xa], fm3130->regs[0xb], + fm3130->regs[0xc], fm3130->regs[0xd], + fm3130->regs[0xe]); + + t->tm_sec = BCD2BIN(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f); + t->tm_min = BCD2BIN(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f); + tmp = fm3130->regs[FM3130_RTC_HOURS] & 0x3f; + t->tm_hour = BCD2BIN(tmp); + t->tm_wday = BCD2BIN(fm3130->regs[FM3130_RTC_DAY] & 0x07) - 1; + t->tm_mday = BCD2BIN(fm3130->regs[FM3130_RTC_DATE] & 0x3f); + tmp = fm3130->regs[FM3130_RTC_MONTHS] & 0x1f; + t->tm_mon = BCD2BIN(tmp) - 1; + + /* assume 20YY not 19YY, and ignore CF bit */ + t->tm_year = BCD2BIN(fm3130->regs[FM3130_RTC_YEARS]) + 100; + + dev_dbg(dev, "%s secs=%d, mins=%d, " + "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", + "read", t->tm_sec, t->tm_min, + t->tm_hour, t->tm_mday, + t->tm_mon, t->tm_year, t->tm_wday); + + /* initial clock setting can be undefined */ + return rtc_valid_tm(t); +} + + +static int fm3130_set_time(struct device *dev, struct rtc_time *t) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + int tmp, i; + u8 *buf = fm3130->regs; + + dev_dbg(dev, "%s secs=%d, mins=%d, " + "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", + "write", t->tm_sec, t->tm_min, + t->tm_hour, t->tm_mday, + t->tm_mon, t->tm_year, t->tm_wday); + + /* first register addr */ + buf[FM3130_RTC_SECONDS] = BIN2BCD(t->tm_sec); + buf[FM3130_RTC_MINUTES] = BIN2BCD(t->tm_min); + buf[FM3130_RTC_HOURS] = BIN2BCD(t->tm_hour); + buf[FM3130_RTC_DAY] = BIN2BCD(t->tm_wday + 1); + buf[FM3130_RTC_DATE] = BIN2BCD(t->tm_mday); + buf[FM3130_RTC_MONTHS] = BIN2BCD(t->tm_mon + 1); + + /* assume 20YY not 19YY */ + tmp = t->tm_year - 100; + buf[FM3130_RTC_YEARS] = BIN2BCD(tmp); + + dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x" + "%02x %02x %02x %02x %02x %02x %02x %02x\n", + "write", buf[0], buf[1], buf[2], buf[3], + buf[4], buf[5], buf[6], buf[7], + buf[8], buf[9], buf[0xa], buf[0xb], + buf[0xc], buf[0xd], buf[0xe]); + + fm3130_rtc_mode(dev, FM3130_MODE_WRITE); + + /* Writing time registers, we don't support multibyte transfers */ + for (i = 0; i < FM3130_CLOCK_REGS; i++) { + i2c_smbus_write_byte_data(fm3130->client, + FM3130_RTC_SECONDS + i, + fm3130->regs[FM3130_RTC_SECONDS + i]); + } + + fm3130_rtc_mode(dev, FM3130_MODE_NORMAL); + + /* We assume here that data are valid once written */ + if (!fm3130->data_valid) + fm3130->data_valid = 1; + return 0; +} + +static int fm3130_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + int tmp; + struct rtc_time *tm = &alrm->time; + /* read the RTC alarm registers all at once */ + tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent), + &fm3130->msg[2], 2); + if (tmp != 2) { + dev_err(dev, "%s error %d\n", "read", tmp); + return -EIO; + } + dev_dbg(dev, "alarm read %02x %02x %02x %02x %02x\n", + fm3130->regs[FM3130_ALARM_SECONDS], + fm3130->regs[FM3130_ALARM_MINUTES], + fm3130->regs[FM3130_ALARM_HOURS], + fm3130->regs[FM3130_ALARM_DATE], + fm3130->regs[FM3130_ALARM_MONTHS]); + + + tm->tm_sec = BCD2BIN(fm3130->regs[FM3130_ALARM_SECONDS] & 0x7F); + tm->tm_min = BCD2BIN(fm3130->regs[FM3130_ALARM_MINUTES] & 0x7F); + tm->tm_hour = BCD2BIN(fm3130->regs[FM3130_ALARM_HOURS] & 0x3F); + tm->tm_mday = BCD2BIN(fm3130->regs[FM3130_ALARM_DATE] & 0x3F); + tm->tm_mon = BCD2BIN(fm3130->regs[FM3130_ALARM_MONTHS] & 0x1F); + if (tm->tm_mon > 0) + tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */ + dev_dbg(dev, "%s secs=%d, mins=%d, " + "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", + "read alarm", tm->tm_sec, tm->tm_min, + tm->tm_hour, tm->tm_mday, + tm->tm_mon, tm->tm_year, tm->tm_wday); + + return 0; +} + +static int fm3130_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + struct rtc_time *tm = &alrm->time; + int i; + + dev_dbg(dev, "%s secs=%d, mins=%d, " + "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", + "write alarm", tm->tm_sec, tm->tm_min, + tm->tm_hour, tm->tm_mday, + tm->tm_mon, tm->tm_year, tm->tm_wday); + + if (tm->tm_sec != -1) + fm3130->regs[FM3130_ALARM_SECONDS] = + BIN2BCD(tm->tm_sec) | 0x80; + + if (tm->tm_min != -1) + fm3130->regs[FM3130_ALARM_MINUTES] = + BIN2BCD(tm->tm_min) | 0x80; + + if (tm->tm_hour != -1) + fm3130->regs[FM3130_ALARM_HOURS] = + BIN2BCD(tm->tm_hour) | 0x80; + + if (tm->tm_mday != -1) + fm3130->regs[FM3130_ALARM_DATE] = + BIN2BCD(tm->tm_mday) | 0x80; + + if (tm->tm_mon != -1) + fm3130->regs[FM3130_ALARM_MONTHS] = + BIN2BCD(tm->tm_mon + 1) | 0x80; + + dev_dbg(dev, "alarm write %02x %02x %02x %02x %02x\n", + fm3130->regs[FM3130_ALARM_SECONDS], + fm3130->regs[FM3130_ALARM_MINUTES], + fm3130->regs[FM3130_ALARM_HOURS], + fm3130->regs[FM3130_ALARM_DATE], + fm3130->regs[FM3130_ALARM_MONTHS]); + /* Writing time registers, we don't support multibyte transfers */ + for (i = 0; i < FM3130_ALARM_REGS; i++) { + i2c_smbus_write_byte_data(fm3130->client, + FM3130_ALARM_SECONDS + i, + fm3130->regs[FM3130_ALARM_SECONDS + i]); + } + fm3130->regs[FM3130_RTC_CONTROL] = + i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL); + /* Checking for alarm */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) { + fm3130->alarm = 1; + fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF; + } + if (alrm->enabled) { + i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL, + (fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_CAL)) | + FM3130_RTC_CONTROL_BIT_AEN); + } else { + i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL, + fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_AEN)); + } + return 0; +} + +static const struct rtc_class_ops fm3130_rtc_ops = { + .read_time = fm3130_get_time, + .set_time = fm3130_set_time, + .read_alarm = fm3130_read_alarm, + .set_alarm = fm3130_set_alarm, +}; + +static struct i2c_driver fm3130_driver; + +static int __devinit fm3130_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct fm3130 *fm3130; + int err = -ENODEV; + int tmp; + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + + if (!i2c_check_functionality(adapter, + I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -EIO; + + fm3130 = kzalloc(sizeof(struct fm3130), GFP_KERNEL); + + if (!fm3130) + return -ENOMEM; + + fm3130->client = client; + i2c_set_clientdata(client, fm3130); + fm3130->reg_addr_time = FM3130_RTC_SECONDS; + fm3130->reg_addr_alarm = FM3130_ALARM_SECONDS; + + /* Messages to read time */ + fm3130->msg[0].addr = client->addr; + fm3130->msg[0].flags = 0; + fm3130->msg[0].len = 1; + fm3130->msg[0].buf = &fm3130->reg_addr_time; + + fm3130->msg[1].addr = client->addr; + fm3130->msg[1].flags = I2C_M_RD; + fm3130->msg[1].len = FM3130_CLOCK_REGS; + fm3130->msg[1].buf = &fm3130->regs[FM3130_RTC_SECONDS]; + + /* Messages to read alarm */ + fm3130->msg[2].addr = client->addr; + fm3130->msg[2].flags = 0; + fm3130->msg[2].len = 1; + fm3130->msg[2].buf = &fm3130->reg_addr_alarm; + + fm3130->msg[3].addr = client->addr; + fm3130->msg[3].flags = I2C_M_RD; + fm3130->msg[3].len = FM3130_ALARM_REGS; + fm3130->msg[3].buf = &fm3130->regs[FM3130_ALARM_SECONDS]; + + fm3130->data_valid = 0; + + tmp = i2c_transfer(adapter, fm3130->msg, 4); + if (tmp != 4) { + pr_debug("read error %d\n", tmp); + err = -EIO; + goto exit_free; + } + + fm3130->regs[FM3130_RTC_CONTROL] = + i2c_smbus_read_byte_data(client, FM3130_RTC_CONTROL); + fm3130->regs[FM3130_CAL_CONTROL] = + i2c_smbus_read_byte_data(client, FM3130_CAL_CONTROL); + + /* Checking for alarm */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) { + fm3130->alarm = 1; + fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF; + } + + /* Disabling calibration mode */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL) + i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, + fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_CAL)); + dev_warn(&client->dev, "Disabling calibration mode!\n"); + + /* Disabling read and write modes */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_WRITE || + fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ) + i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, + fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_READ | + FM3130_RTC_CONTROL_BIT_WRITE)); + dev_warn(&client->dev, "Disabling READ or WRITE mode!\n"); + + /* oscillator off? turn it on, so clock can tick. */ + if (fm3130->regs[FM3130_CAL_CONTROL] & FM3130_CAL_CONTROL_BIT_nOSCEN) + i2c_smbus_write_byte_data(client, FM3130_CAL_CONTROL, + fm3130->regs[FM3130_CAL_CONTROL] & + ~(FM3130_CAL_CONTROL_BIT_nOSCEN)); + + /* oscillator fault? clear flag, and warn */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_LB) + dev_warn(&client->dev, "Low battery!\n"); + + /* oscillator fault? clear flag, and warn */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_POR) { + i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, + fm3130->regs[FM3130_RTC_CONTROL] & + ~FM3130_RTC_CONTROL_BIT_POR); + dev_warn(&client->dev, "SET TIME!\n"); + } + /* ACS is controlled by alarm */ + i2c_smbus_write_byte_data(client, FM3130_ALARM_WP_CONTROL, 0x80); + + /* TODO */ + /* TODO need to sanity check alarm */ + tmp = fm3130->regs[FM3130_RTC_SECONDS]; + tmp = BCD2BIN(tmp & 0x7f); + if (tmp > 60) + goto exit_bad; + tmp = BCD2BIN(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f); + if (tmp > 60) + goto exit_bad; + + tmp = BCD2BIN(fm3130->regs[FM3130_RTC_DATE] & 0x3f); + if (tmp == 0 || tmp > 31) + goto exit_bad; + + tmp = BCD2BIN(fm3130->regs[FM3130_RTC_MONTHS] & 0x1f); + if (tmp == 0 || tmp > 12) + goto exit_bad; + + tmp = fm3130->regs[FM3130_RTC_HOURS]; + + fm3130->data_valid = 1; + +exit_bad: + if (!fm3130->data_valid) + dev_dbg(&client->dev, + "%s: %02x %02x %02x %02x %02x %02x %02x %02x" + "%02x %02x %02x %02x %02x %02x %02x\n", + "bogus registers", + fm3130->regs[0], fm3130->regs[1], + fm3130->regs[2], fm3130->regs[3], + fm3130->regs[4], fm3130->regs[5], + fm3130->regs[6], fm3130->regs[7], + fm3130->regs[8], fm3130->regs[9], + fm3130->regs[0xa], fm3130->regs[0xb], + fm3130->regs[0xc], fm3130->regs[0xd], + fm3130->regs[0xe]); + + /* We won't bail out here because we just got invalid data. + Time setting from u-boot doesn't work anyway */ + fm3130->rtc = rtc_device_register(client->name, &client->dev, + &fm3130_rtc_ops, THIS_MODULE); + if (IS_ERR(fm3130->rtc)) { + err = PTR_ERR(fm3130->rtc); + dev_err(&client->dev, + "unable to register the class device\n"); + goto exit_free; + } + return 0; +exit_free: + kfree(fm3130); + return err; +} + +static int __devexit fm3130_remove(struct i2c_client *client) +{ + struct fm3130 *fm3130 = i2c_get_clientdata(client); + + rtc_device_unregister(fm3130->rtc); + kfree(fm3130); + return 0; +} + +static struct i2c_driver fm3130_driver = { + .driver = { + .name = "rtc-fm3130", + .owner = THIS_MODULE, + }, + .probe = fm3130_probe, + .remove = __devexit_p(fm3130_remove), + .id_table = fm3130_id, +}; + +static int __init fm3130_init(void) +{ + return i2c_add_driver(&fm3130_driver); +} +module_init(fm3130_init); + +static void __exit fm3130_exit(void) +{ + i2c_del_driver(&fm3130_driver); +} +module_exit(fm3130_exit); + +MODULE_DESCRIPTION("RTC driver for FM3130"); +MODULE_AUTHOR("Sergey Lapin <slapin@ossfans.org>"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/rtc/rtc-ppc.c b/drivers/rtc/rtc-ppc.c new file mode 100644 index 000000000000..c8e97e25ef7e --- /dev/null +++ b/drivers/rtc/rtc-ppc.c @@ -0,0 +1,69 @@ +/* + * RTC driver for ppc_md RTC functions + * + * © 2007 Red Hat, Inc. + * + * Author: David Woodhouse <dwmw2@infradead.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + +#include <linux/module.h> +#include <linux/err.h> +#include <linux/rtc.h> +#include <linux/platform_device.h> +#include <asm/machdep.h> + +static int ppc_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + ppc_md.get_rtc_time(tm); + return 0; +} + +static int ppc_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + return ppc_md.set_rtc_time(tm); +} + +static const struct rtc_class_ops ppc_rtc_ops = { + .set_time = ppc_rtc_set_time, + .read_time = ppc_rtc_read_time, +}; + +static struct rtc_device *rtc; +static struct platform_device *ppc_rtc_pdev; + +static int __init ppc_rtc_init(void) +{ + if (!ppc_md.get_rtc_time || !ppc_md.set_rtc_time) + return -ENODEV; + + ppc_rtc_pdev = platform_device_register_simple("ppc-rtc", 0, NULL, 0); + if (IS_ERR(ppc_rtc_pdev)) + return PTR_ERR(ppc_rtc_pdev); + + rtc = rtc_device_register("ppc_md", &ppc_rtc_pdev->dev, + &ppc_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) { + platform_device_unregister(ppc_rtc_pdev); + return PTR_ERR(rtc); + } + + return 0; +} + +static void __exit ppc_rtc_exit(void) +{ + rtc_device_unregister(rtc); + platform_device_unregister(ppc_rtc_pdev); +} + +module_init(ppc_rtc_init); +module_exit(ppc_rtc_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>"); +MODULE_DESCRIPTION("Generic RTC class driver for PowerPC"); diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index 82f62d25f921..67421b0d3a7b 100644 --- a/drivers/rtc/rtc-sa1100.c +++ b/drivers/rtc/rtc-sa1100.c @@ -331,14 +331,14 @@ static int sa1100_rtc_probe(struct platform_device *pdev) RCNR = 0; } + device_init_wakeup(&pdev->dev, 1); + rtc = rtc_device_register(pdev->name, &pdev->dev, &sa1100_rtc_ops, THIS_MODULE); if (IS_ERR(rtc)) return PTR_ERR(rtc); - device_init_wakeup(&pdev->dev, 1); - platform_set_drvdata(pdev, rtc); return 0; diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c index eaf55945f21b..7dcfba1bbfe1 100644 --- a/drivers/rtc/rtc-x1205.c +++ b/drivers/rtc/rtc-x1205.c @@ -71,6 +71,7 @@ #define X1205_SR_RTCF 0x01 /* Clock failure */ #define X1205_SR_WEL 0x02 /* Write Enable Latch */ #define X1205_SR_RWEL 0x04 /* Register Write Enable */ +#define X1205_SR_AL0 0x20 /* Alarm 0 match */ #define X1205_DTR_DTR0 0x01 #define X1205_DTR_DTR1 0x02 @@ -78,6 +79,8 @@ #define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */ +#define X1205_INT_AL0E 0x20 /* Alarm 0 enable */ + static struct i2c_driver x1205_driver; /* @@ -89,8 +92,8 @@ static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, unsigned char reg_base) { unsigned char dt_addr[2] = { 0, reg_base }; - unsigned char buf[8]; + int i; struct i2c_msg msgs[] = { { client->addr, 0, 2, dt_addr }, /* setup read ptr */ @@ -98,7 +101,7 @@ static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, }; /* read date registers */ - if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) { dev_err(&client->dev, "%s: read error\n", __func__); return -EIO; } @@ -110,6 +113,11 @@ static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]); + /* Mask out the enable bits if these are alarm registers */ + if (reg_base < X1205_CCR_BASE) + for (i = 0; i <= 4; i++) + buf[i] &= 0x7F; + tm->tm_sec = BCD2BIN(buf[CCR_SEC]); tm->tm_min = BCD2BIN(buf[CCR_MIN]); tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */ @@ -138,7 +146,7 @@ static int x1205_get_status(struct i2c_client *client, unsigned char *sr) }; /* read status register */ - if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) { dev_err(&client->dev, "%s: read error\n", __func__); return -EIO; } @@ -147,10 +155,11 @@ static int x1205_get_status(struct i2c_client *client, unsigned char *sr) } static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, - int datetoo, u8 reg_base) + int datetoo, u8 reg_base, unsigned char alm_enable) { - int i, xfer; + int i, xfer, nbytes; unsigned char buf[8]; + unsigned char rdata[10] = { 0, reg_base }; static const unsigned char wel[3] = { 0, X1205_REG_SR, X1205_SR_WEL }; @@ -189,6 +198,11 @@ static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, buf[CCR_Y2K] = BIN2BCD(tm->tm_year / 100); } + /* If writing alarm registers, set compare bits on registers 0-4 */ + if (reg_base < X1205_CCR_BASE) + for (i = 0; i <= 4; i++) + buf[i] |= 0x80; + /* this sequence is required to unlock the chip */ if ((xfer = i2c_master_send(client, wel, 3)) != 3) { dev_err(&client->dev, "%s: wel - %d\n", __func__, xfer); @@ -200,19 +214,57 @@ static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, return -EIO; } + /* write register's data */ - for (i = 0; i < (datetoo ? 8 : 3); i++) { - unsigned char rdata[3] = { 0, reg_base + i, buf[i] }; + if (datetoo) + nbytes = 8; + else + nbytes = 3; + for (i = 0; i < nbytes; i++) + rdata[2+i] = buf[i]; + + xfer = i2c_master_send(client, rdata, nbytes+2); + if (xfer != nbytes+2) { + dev_err(&client->dev, + "%s: result=%d addr=%02x, data=%02x\n", + __func__, + xfer, rdata[1], rdata[2]); + return -EIO; + } + + /* If we wrote to the nonvolatile region, wait 10msec for write cycle*/ + if (reg_base < X1205_CCR_BASE) { + unsigned char al0e[3] = { 0, X1205_REG_INT, 0 }; + + msleep(10); - xfer = i2c_master_send(client, rdata, 3); + /* ...and set or clear the AL0E bit in the INT register */ + + /* Need to set RWEL again as the write has cleared it */ + xfer = i2c_master_send(client, rwel, 3); if (xfer != 3) { dev_err(&client->dev, - "%s: xfer=%d addr=%02x, data=%02x\n", + "%s: aloe rwel - %d\n", __func__, - xfer, rdata[1], rdata[2]); + xfer); + return -EIO; + } + + if (alm_enable) + al0e[2] = X1205_INT_AL0E; + + xfer = i2c_master_send(client, al0e, 3); + if (xfer != 3) { + dev_err(&client->dev, + "%s: al0e - %d\n", + __func__, + xfer); return -EIO; } - }; + + /* and wait 10msec again for this write to complete */ + msleep(10); + } /* disable further writes */ if ((xfer = i2c_master_send(client, diswe, 3)) != 3) { @@ -230,9 +282,9 @@ static int x1205_fix_osc(struct i2c_client *client) tm.tm_hour = tm.tm_min = tm.tm_sec = 0; - if ((err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE)) < 0) - dev_err(&client->dev, - "unable to restart the oscillator\n"); + err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE, 0); + if (err < 0) + dev_err(&client->dev, "unable to restart the oscillator\n"); return err; } @@ -248,7 +300,7 @@ static int x1205_get_dtrim(struct i2c_client *client, int *trim) }; /* read dtr register */ - if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) { dev_err(&client->dev, "%s: read error\n", __func__); return -EIO; } @@ -280,7 +332,7 @@ static int x1205_get_atrim(struct i2c_client *client, int *trim) }; /* read atr register */ - if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) { dev_err(&client->dev, "%s: read error\n", __func__); return -EIO; } @@ -403,14 +455,33 @@ static int x1205_validate_client(struct i2c_client *client) static int x1205_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) { - return x1205_get_datetime(to_i2c_client(dev), - &alrm->time, X1205_ALM0_BASE); + int err; + unsigned char intreg, status; + static unsigned char int_addr[2] = { 0, X1205_REG_INT }; + struct i2c_client *client = to_i2c_client(dev); + struct i2c_msg msgs[] = { + { client->addr, 0, 2, int_addr }, /* setup read ptr */ + { client->addr, I2C_M_RD, 1, &intreg }, /* read INT register */ + }; + + /* read interrupt register and status register */ + if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) { + dev_err(&client->dev, "%s: read error\n", __func__); + return -EIO; + } + err = x1205_get_status(client, &status); + if (err == 0) { + alrm->pending = (status & X1205_SR_AL0) ? 1 : 0; + alrm->enabled = (intreg & X1205_INT_AL0E) ? 1 : 0; + err = x1205_get_datetime(client, &alrm->time, X1205_ALM0_BASE); + } + return err; } static int x1205_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) { return x1205_set_datetime(to_i2c_client(dev), - &alrm->time, 1, X1205_ALM0_BASE); + &alrm->time, 1, X1205_ALM0_BASE, alrm->enabled); } static int x1205_rtc_read_time(struct device *dev, struct rtc_time *tm) @@ -422,7 +493,7 @@ static int x1205_rtc_read_time(struct device *dev, struct rtc_time *tm) static int x1205_rtc_set_time(struct device *dev, struct rtc_time *tm) { return x1205_set_datetime(to_i2c_client(dev), - tm, 1, X1205_CCR_BASE); + tm, 1, X1205_CCR_BASE, 0); } static int x1205_rtc_proc(struct device *dev, struct seq_file *seq) |