diff options
Diffstat (limited to 'drivers/remoteproc/ti_k3_dsp_remoteproc.c')
| -rw-r--r-- | drivers/remoteproc/ti_k3_dsp_remoteproc.c | 72 |
1 files changed, 72 insertions, 0 deletions
diff --git a/drivers/remoteproc/ti_k3_dsp_remoteproc.c b/drivers/remoteproc/ti_k3_dsp_remoteproc.c index 18f714b012df..43566ead7a1d 100644 --- a/drivers/remoteproc/ti_k3_dsp_remoteproc.c +++ b/drivers/remoteproc/ti_k3_dsp_remoteproc.c @@ -174,6 +174,9 @@ static int k3_dsp_rproc_reset(struct k3_dsp_rproc *kproc) return ret; } + if (kproc->data->uses_lreset) + return ret; + ret = kproc->ti_sci->ops.dev_ops.put_device(kproc->ti_sci, kproc->ti_sci_id); if (ret) { @@ -191,6 +194,9 @@ static int k3_dsp_rproc_release(struct k3_dsp_rproc *kproc) struct device *dev = kproc->dev; int ret; + if (kproc->data->uses_lreset) + goto lreset; + ret = kproc->ti_sci->ops.dev_ops.get_device(kproc->ti_sci, kproc->ti_sci_id); if (ret) { @@ -198,6 +204,7 @@ static int k3_dsp_rproc_release(struct k3_dsp_rproc *kproc) return ret; } +lreset: ret = reset_control_deassert(kproc->reset); if (ret) { dev_err(dev, "local-reset deassert failed, ret = %d\n", ret); @@ -210,6 +217,53 @@ static int k3_dsp_rproc_release(struct k3_dsp_rproc *kproc) } /* + * The C66x DSP cores have a local reset that affects only the CPU, and a + * generic module reset that powers on the device and allows the DSP internal + * memories to be accessed while the local reset is asserted. This function is + * used to release the global reset on C66x DSPs to allow loading into the DSP + * internal RAMs. The .prepare() ops is invoked by remoteproc core before any + * firmware loading, and is followed by the .start() ops after loading to + * actually let the C66x DSP cores run. + */ +static int k3_dsp_rproc_prepare(struct rproc *rproc) +{ + struct k3_dsp_rproc *kproc = rproc->priv; + struct device *dev = kproc->dev; + int ret; + + ret = kproc->ti_sci->ops.dev_ops.get_device(kproc->ti_sci, + kproc->ti_sci_id); + if (ret) + dev_err(dev, "module-reset deassert failed, cannot enable internal RAM loading, ret = %d\n", + ret); + + return ret; +} + +/* + * This function implements the .unprepare() ops and performs the complimentary + * operations to that of the .prepare() ops. The function is used to assert the + * global reset on applicable C66x cores. This completes the second portion of + * powering down the C66x DSP cores. The cores themselves are only halted in the + * .stop() callback through the local reset, and the .unprepare() ops is invoked + * by the remoteproc core after the remoteproc is stopped to balance the global + * reset. + */ +static int k3_dsp_rproc_unprepare(struct rproc *rproc) +{ + struct k3_dsp_rproc *kproc = rproc->priv; + struct device *dev = kproc->dev; + int ret; + + ret = kproc->ti_sci->ops.dev_ops.put_device(kproc->ti_sci, + kproc->ti_sci_id); + if (ret) + dev_err(dev, "module-reset assert failed, ret = %d\n", ret); + + return ret; +} + +/* * Power up the DSP remote processor. * * This function will be invoked only after the firmware for this rproc @@ -352,6 +406,8 @@ static void *k3_dsp_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len) } static const struct rproc_ops k3_dsp_rproc_ops = { + .prepare = k3_dsp_rproc_prepare, + .unprepare = k3_dsp_rproc_unprepare, .start = k3_dsp_rproc_start, .stop = k3_dsp_rproc_stop, .kick = k3_dsp_rproc_kick, @@ -612,6 +668,22 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev) goto release_tsp; } + /* + * ensure the DSP local reset is asserted to ensure the DSP doesn't + * execute bogus code in .prepare() when the module reset is released. + */ + if (data->uses_lreset) { + ret = reset_control_status(kproc->reset); + if (ret < 0) { + dev_err(dev, "failed to get reset status, status = %d\n", + ret); + goto release_mem; + } else if (ret == 0) { + dev_warn(dev, "local reset is deasserted for device\n"); + k3_dsp_rproc_reset(kproc); + } + } + ret = rproc_add(rproc); if (ret) { dev_err(dev, "failed to add register device with remoteproc core, status = %d\n", |