diff options
Diffstat (limited to 'drivers/regulator')
| -rw-r--r-- | drivers/regulator/axp20x-regulator.c | 102 |
1 files changed, 98 insertions, 4 deletions
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index 376a99b7cf5d..e1761df4cbfd 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -244,6 +244,7 @@ static const struct regulator_desc axp22x_drivevbus_regulator = { .ops = &axp20x_ops_sw, }; +/* DCDC ranges shared with AXP813 */ static const struct regulator_linear_range axp803_dcdc234_ranges[] = { REGULATOR_LINEAR_RANGE(500000, 0x0, 0x46, 10000), REGULATOR_LINEAR_RANGE(1220000, 0x47, 0x4b, 20000), @@ -426,6 +427,69 @@ static const struct regulator_desc axp809_regulators[] = { AXP_DESC_SW(AXP809, SW, "sw", "swin", AXP22X_PWR_OUT_CTRL2, BIT(6)), }; +static const struct regulator_desc axp813_regulators[] = { + AXP_DESC(AXP813, DCDC1, "dcdc1", "vin1", 1600, 3400, 100, + AXP803_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(0)), + AXP_DESC_RANGES(AXP813, DCDC2, "dcdc2", "vin2", axp803_dcdc234_ranges, + 76, AXP803_DCDC2_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1, + BIT(1)), + AXP_DESC_RANGES(AXP813, DCDC3, "dcdc3", "vin3", axp803_dcdc234_ranges, + 76, AXP803_DCDC3_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1, + BIT(2)), + AXP_DESC_RANGES(AXP813, DCDC4, "dcdc4", "vin4", axp803_dcdc234_ranges, + 76, AXP803_DCDC4_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1, + BIT(3)), + AXP_DESC_RANGES(AXP813, DCDC5, "dcdc5", "vin5", axp803_dcdc5_ranges, + 68, AXP803_DCDC5_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1, + BIT(4)), + AXP_DESC_RANGES(AXP813, DCDC6, "dcdc6", "vin6", axp803_dcdc6_ranges, + 72, AXP803_DCDC6_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1, + BIT(5)), + AXP_DESC_RANGES(AXP813, DCDC7, "dcdc7", "vin7", axp803_dcdc6_ranges, + 72, AXP813_DCDC7_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1, + BIT(6)), + AXP_DESC(AXP813, ALDO1, "aldo1", "aldoin", 700, 3300, 100, + AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(5)), + AXP_DESC(AXP813, ALDO2, "aldo2", "aldoin", 700, 3300, 100, + AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(6)), + AXP_DESC(AXP813, ALDO3, "aldo3", "aldoin", 700, 3300, 100, + AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(7)), + AXP_DESC(AXP813, DLDO1, "dldo1", "dldoin", 700, 3300, 100, + AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(3)), + AXP_DESC_RANGES(AXP813, DLDO2, "dldo2", "dldoin", axp803_dldo2_ranges, + 32, AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, + BIT(4)), + AXP_DESC(AXP813, DLDO3, "dldo3", "dldoin", 700, 3300, 100, + AXP22X_DLDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)), + AXP_DESC(AXP813, DLDO4, "dldo4", "dldoin", 700, 3300, 100, + AXP22X_DLDO4_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(6)), + AXP_DESC(AXP813, ELDO1, "eldo1", "eldoin", 700, 1900, 50, + AXP22X_ELDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(0)), + AXP_DESC(AXP813, ELDO2, "eldo2", "eldoin", 700, 1900, 50, + AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)), + AXP_DESC(AXP813, ELDO3, "eldo3", "eldoin", 700, 1900, 50, + AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)), + /* to do / check ... */ + AXP_DESC(AXP813, FLDO1, "fldo1", "fldoin", 700, 1450, 50, + AXP803_FLDO1_V_OUT, 0x0f, AXP22X_PWR_OUT_CTRL3, BIT(2)), + AXP_DESC(AXP813, FLDO2, "fldo2", "fldoin", 700, 1450, 50, + AXP803_FLDO2_V_OUT, 0x0f, AXP22X_PWR_OUT_CTRL3, BIT(3)), + /* + * TODO: FLDO3 = {DCDC5, FLDOIN} / 2 + * + * This means FLDO3 effectively switches supplies at runtime, + * something the regulator subsystem does not support. + */ + AXP_DESC_FIXED(AXP813, RTC_LDO, "rtc-ldo", "ips", 1800), + AXP_DESC_IO(AXP813, LDO_IO0, "ldo-io0", "ips", 700, 3300, 100, + AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07, + AXP22X_IO_ENABLED, AXP22X_IO_DISABLED), + AXP_DESC_IO(AXP813, LDO_IO1, "ldo-io1", "ips", 700, 3300, 100, + AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07, + AXP22X_IO_ENABLED, AXP22X_IO_DISABLED), + AXP_DESC_SW(AXP813, SW, "sw", "swin", AXP22X_PWR_OUT_CTRL2, BIT(7)), +}; + static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq) { struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); @@ -441,9 +505,10 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq) step = 75; break; case AXP803_ID: + case AXP813_ID: /* - * AXP803 DCDC work frequency setting has the same range and - * step as AXP22X, but at a different register. + * AXP803/AXP813 DCDC work frequency setting has the same + * range and step as AXP22X, but at a different register. * Fall through to the check below. * (See include/linux/mfd/axp20x.h) */ @@ -561,6 +626,14 @@ static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 work workmode <<= id - AXP803_DCDC1; break; + case AXP813_ID: + if (id < AXP813_DCDC1 || id > AXP813_DCDC7) + return -EINVAL; + + mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP813_DCDC1); + workmode <<= id - AXP813_DCDC1; + break; + default: /* should not happen */ WARN_ON(1); @@ -579,8 +652,8 @@ static bool axp20x_is_polyphase_slave(struct axp20x_dev *axp20x, int id) u32 reg = 0; /* - * Currently in our supported AXP variants, only AXP803 and AXP806 - * have polyphase regulators. + * Currently in our supported AXP variants, only AXP803, AXP806, + * and AXP813 have polyphase regulators. */ switch (axp20x->variant) { case AXP803_ID: @@ -608,6 +681,17 @@ static bool axp20x_is_polyphase_slave(struct axp20x_dev *axp20x, int id) } break; + case AXP813_ID: + regmap_read(axp20x->regmap, AXP803_POLYPHASE_CTRL, ®); + + switch (id) { + case AXP803_DCDC3: + return !!(reg & BIT(6)); + case AXP803_DCDC6: + return !!(reg & BIT(5)); + } + break; + default: return false; } @@ -656,6 +740,12 @@ static int axp20x_regulator_probe(struct platform_device *pdev) regulators = axp809_regulators; nregulators = AXP809_REG_ID_MAX; break; + case AXP813_ID: + regulators = axp813_regulators; + nregulators = AXP813_REG_ID_MAX; + drivevbus = of_property_read_bool(pdev->dev.parent->of_node, + "x-powers,drive-vbus-en"); + break; default: dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n", axp20x->variant); @@ -677,6 +767,10 @@ static int axp20x_regulator_probe(struct platform_device *pdev) if (axp20x_is_polyphase_slave(axp20x, i)) continue; + /* Support for AXP813's FLDO3 is not implemented */ + if (axp20x->variant == AXP813_ID && i == AXP813_FLDO3) + continue; + /* * Regulators DC1SW and DC5LDO are connected internally, * so we have to handle their supply names separately. |