diff options
Diffstat (limited to 'drivers/regulator')
-rw-r--r-- | drivers/regulator/act8945a-regulator.c | 8 | ||||
-rw-r--r-- | drivers/regulator/axp20x-regulator.c | 10 | ||||
-rw-r--r-- | drivers/regulator/lp87565-regulator.c | 8 | ||||
-rw-r--r-- | drivers/regulator/of_regulator.c | 4 | ||||
-rw-r--r-- | drivers/regulator/slg51000-regulator.c | 4 | ||||
-rw-r--r-- | drivers/regulator/twl-regulator.c | 23 |
6 files changed, 38 insertions, 19 deletions
diff --git a/drivers/regulator/act8945a-regulator.c b/drivers/regulator/act8945a-regulator.c index 584284938ac9..d2f804dbc785 100644 --- a/drivers/regulator/act8945a-regulator.c +++ b/drivers/regulator/act8945a-regulator.c @@ -169,16 +169,16 @@ static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode) reg = ACT8945A_DCDC3_CTRL; break; case ACT8945A_ID_LDO1: - reg = ACT8945A_LDO1_SUS; + reg = ACT8945A_LDO1_CTRL; break; case ACT8945A_ID_LDO2: - reg = ACT8945A_LDO2_SUS; + reg = ACT8945A_LDO2_CTRL; break; case ACT8945A_ID_LDO3: - reg = ACT8945A_LDO3_SUS; + reg = ACT8945A_LDO3_CTRL; break; case ACT8945A_ID_LDO4: - reg = ACT8945A_LDO4_SUS; + reg = ACT8945A_LDO4_CTRL; break; default: return -EINVAL; diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index 152053361862..989506bd90b1 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -174,14 +174,14 @@ #define AXP803_DCDC5_1140mV_STEPS 35 #define AXP803_DCDC5_1140mV_END \ (AXP803_DCDC5_1140mV_START + AXP803_DCDC5_1140mV_STEPS) -#define AXP803_DCDC5_NUM_VOLTAGES 68 +#define AXP803_DCDC5_NUM_VOLTAGES 69 #define AXP803_DCDC6_600mV_START 0x00 #define AXP803_DCDC6_600mV_STEPS 50 #define AXP803_DCDC6_600mV_END \ (AXP803_DCDC6_600mV_START + AXP803_DCDC6_600mV_STEPS) #define AXP803_DCDC6_1120mV_START 0x33 -#define AXP803_DCDC6_1120mV_STEPS 14 +#define AXP803_DCDC6_1120mV_STEPS 20 #define AXP803_DCDC6_1120mV_END \ (AXP803_DCDC6_1120mV_START + AXP803_DCDC6_1120mV_STEPS) #define AXP803_DCDC6_NUM_VOLTAGES 72 @@ -240,7 +240,7 @@ #define AXP806_DCDCA_600mV_END \ (AXP806_DCDCA_600mV_START + AXP806_DCDCA_600mV_STEPS) #define AXP806_DCDCA_1120mV_START 0x33 -#define AXP806_DCDCA_1120mV_STEPS 14 +#define AXP806_DCDCA_1120mV_STEPS 20 #define AXP806_DCDCA_1120mV_END \ (AXP806_DCDCA_1120mV_START + AXP806_DCDCA_1120mV_STEPS) #define AXP806_DCDCA_NUM_VOLTAGES 72 @@ -774,8 +774,8 @@ static const struct regulator_linear_range axp806_dcdcd_ranges[] = { AXP806_DCDCD_600mV_END, 20000), REGULATOR_LINEAR_RANGE(1600000, - AXP806_DCDCD_600mV_START, - AXP806_DCDCD_600mV_END, + AXP806_DCDCD_1600mV_START, + AXP806_DCDCD_1600mV_END, 100000), }; diff --git a/drivers/regulator/lp87565-regulator.c b/drivers/regulator/lp87565-regulator.c index 5d067f7c2116..0c440c5e2832 100644 --- a/drivers/regulator/lp87565-regulator.c +++ b/drivers/regulator/lp87565-regulator.c @@ -163,7 +163,7 @@ static int lp87565_regulator_probe(struct platform_device *pdev) struct lp87565 *lp87565 = dev_get_drvdata(pdev->dev.parent); struct regulator_config config = { }; struct regulator_dev *rdev; - int i, min_idx = LP87565_BUCK_0, max_idx = LP87565_BUCK_3; + int i, min_idx, max_idx; platform_set_drvdata(pdev, lp87565); @@ -182,9 +182,9 @@ static int lp87565_regulator_probe(struct platform_device *pdev) max_idx = LP87565_BUCK_3210; break; default: - dev_err(lp87565->dev, "Invalid lp config %d\n", - lp87565->dev_type); - return -EINVAL; + min_idx = LP87565_BUCK_0; + max_idx = LP87565_BUCK_3; + break; } for (i = min_idx; i <= max_idx; i++) { diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index 397918ebba55..9112faa6a9a0 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -416,8 +416,10 @@ device_node *regulator_of_get_init_node(struct device *dev, if (!name) name = child->name; - if (!strcmp(desc->of_match, name)) + if (!strcmp(desc->of_match, name)) { + of_node_put(search); return of_node_get(child); + } } of_node_put(search); diff --git a/drivers/regulator/slg51000-regulator.c b/drivers/regulator/slg51000-regulator.c index 04b732991d69..4d859fef55e6 100644 --- a/drivers/regulator/slg51000-regulator.c +++ b/drivers/regulator/slg51000-regulator.c @@ -205,7 +205,7 @@ static int slg51000_of_parse_cb(struct device_node *np, ena_gpiod = devm_gpiod_get_from_of_node(chip->dev, np, "enable-gpios", 0, gflags, "gpio-en-ldo"); - if (ena_gpiod) { + if (!IS_ERR(ena_gpiod)) { config->ena_gpiod = ena_gpiod; devm_gpiod_unhinge(chip->dev, config->ena_gpiod); } @@ -459,7 +459,7 @@ static int slg51000_i2c_probe(struct i2c_client *client, GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE, "slg51000-cs"); - if (cs_gpiod) { + if (!IS_ERR(cs_gpiod)) { dev_info(dev, "Found chip selector property\n"); chip->cs_gpiod = cs_gpiod; } diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 6fa15b2d6fb3..866b4dd01da9 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -359,6 +359,17 @@ static const u16 VINTANA2_VSEL_table[] = { 2500, 2750, }; +/* 600mV to 1450mV in 12.5 mV steps */ +static const struct regulator_linear_range VDD1_ranges[] = { + REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500) +}; + +/* 600mV to 1450mV in 12.5 mV steps, everything above = 1500mV */ +static const struct regulator_linear_range VDD2_ranges[] = { + REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500), + REGULATOR_LINEAR_RANGE(1500000, 69, 69, 12500) +}; + static int twl4030ldo_list_voltage(struct regulator_dev *rdev, unsigned index) { struct twlreg_info *info = rdev_get_drvdata(rdev); @@ -427,6 +438,8 @@ static int twl4030smps_get_voltage(struct regulator_dev *rdev) } static const struct regulator_ops twl4030smps_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .set_voltage = twl4030smps_set_voltage, .get_voltage = twl4030smps_get_voltage, }; @@ -466,7 +479,8 @@ static const struct twlreg_info TWL4030_INFO_##label = { \ }, \ } -#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf) \ +#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf, \ + n_volt) \ static const struct twlreg_info TWL4030_INFO_##label = { \ .base = offset, \ .id = num, \ @@ -479,6 +493,9 @@ static const struct twlreg_info TWL4030_INFO_##label = { \ .owner = THIS_MODULE, \ .enable_time = turnon_delay, \ .of_map_mode = twl4030reg_map_mode, \ + .n_voltages = n_volt, \ + .n_linear_ranges = ARRAY_SIZE(label ## _ranges), \ + .linear_ranges = label ## _ranges, \ }, \ } @@ -518,8 +535,8 @@ TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9, 100, 0x00); TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10, 100, 0x08); TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08); TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08); -TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08); -TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08); +TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08, 68); +TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08, 69); /* VUSBCP is managed *only* by the USB subchip */ TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08); TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08); |