diff options
Diffstat (limited to 'drivers/regulator')
25 files changed, 713 insertions, 121 deletions
diff --git a/drivers/regulator/88pm800.c b/drivers/regulator/88pm800.c index d333f7eac106..7a721d67e6ac 100644 --- a/drivers/regulator/88pm800.c +++ b/drivers/regulator/88pm800.c @@ -310,10 +310,8 @@ static int pm800_regulator_probe(struct platform_device *pdev) pm800_data = devm_kzalloc(&pdev->dev, sizeof(*pm800_data), GFP_KERNEL); - if (!pm800_data) { - dev_err(&pdev->dev, "Failed to allocate pm800_regualtors"); + if (!pm800_data) return -ENOMEM; - } pm800_data->map = chip->subchip->regmap_power; pm800_data->chip = chip; diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c index f704d83c93c4..337634ad0562 100644 --- a/drivers/regulator/88pm8607.c +++ b/drivers/regulator/88pm8607.c @@ -2,7 +2,7 @@ * Regulators driver for Marvell 88PM8607 * * Copyright (C) 2009 Marvell International Ltd. - * Haojian Zhuang <haojian.zhuang@marvell.com> + * Haojian Zhuang <haojian.zhuang@marvell.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -78,7 +78,7 @@ static const unsigned int BUCK2_suspend_table[] = { }; static const unsigned int BUCK3_table[] = { - 0, 25000, 50000, 75000, 100000, 125000, 150000, 175000, + 0, 25000, 50000, 75000, 100000, 125000, 150000, 175000, 200000, 225000, 250000, 275000, 300000, 325000, 350000, 375000, 400000, 425000, 450000, 475000, 500000, 525000, 550000, 575000, 600000, 625000, 650000, 675000, 700000, 725000, 750000, 775000, @@ -89,7 +89,7 @@ static const unsigned int BUCK3_table[] = { }; static const unsigned int BUCK3_suspend_table[] = { - 0, 25000, 50000, 75000, 100000, 125000, 150000, 175000, + 0, 25000, 50000, 75000, 100000, 125000, 150000, 175000, 200000, 225000, 250000, 275000, 300000, 325000, 350000, 375000, 400000, 425000, 450000, 475000, 500000, 525000, 550000, 575000, 600000, 625000, 650000, 675000, 700000, 725000, 750000, 775000, @@ -322,7 +322,7 @@ static int pm8607_regulator_dt_init(struct platform_device *pdev, nproot = of_node_get(pdev->dev.parent->of_node); if (!nproot) return -ENODEV; - nproot = of_find_node_by_name(nproot, "regulators"); + nproot = of_get_child_by_name(nproot, "regulators"); if (!nproot) { dev_err(&pdev->dev, "failed to find regulators node\n"); return -ENODEV; diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 6a7932822e37..1169a42519d5 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -139,6 +139,14 @@ config REGULATOR_AS3722 AS3722 PMIC. This will enable support for all the software controllable DCDC/LDO regulators. +config REGULATOR_BCM590XX + tristate "Broadcom BCM590xx PMU Regulators" + depends on MFD_BCM590XX + help + This driver provides support for the voltage regulators on the + BCM590xx PMUs. This will enable support for the software + controllable LDO/Switching regulators. + config REGULATOR_DA903X tristate "Dialog Semiconductor DA9030/DA9034 regulators" depends on PMIC_DA903X diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 979f9ddcf259..e1ab514f03c5 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o +obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o obj-$(CONFIG_REGULATOR_DA9055) += da9055-regulator.o diff --git a/drivers/regulator/aat2870-regulator.c b/drivers/regulator/aat2870-regulator.c index f70a9bfa5ff2..c873ee0082cf 100644 --- a/drivers/regulator/aat2870-regulator.c +++ b/drivers/regulator/aat2870-regulator.c @@ -99,6 +99,7 @@ static int aat2870_ldo_is_enabled(struct regulator_dev *rdev) static struct regulator_ops aat2870_ldo_ops = { .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_ascend, .set_voltage_sel = aat2870_ldo_set_voltage_sel, .get_voltage_sel = aat2870_ldo_get_voltage_sel, .enable = aat2870_ldo_enable, diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c index 77b46d0b37a6..e10febe9ec34 100644 --- a/drivers/regulator/ab3100.c +++ b/drivers/regulator/ab3100.c @@ -498,7 +498,7 @@ static int ab3100_regulator_register(struct platform_device *pdev, struct ab3100_platform_data *plfdata, struct regulator_init_data *init_data, struct device_node *np, - int id) + unsigned long id) { struct regulator_desc *desc; struct ab3100_regulator *reg; @@ -646,7 +646,7 @@ ab3100_regulator_of_probe(struct platform_device *pdev, struct device_node *np) err = ab3100_regulator_register( pdev, NULL, ab3100_regulator_matches[i].init_data, ab3100_regulator_matches[i].of_node, - (int) ab3100_regulator_matches[i].driver_data); + (unsigned long)ab3100_regulator_matches[i].driver_data); if (err) { ab3100_regulators_remove(pdev); return err; diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c index 084cc0819a52..b92d7dd01a18 100644 --- a/drivers/regulator/act8865-regulator.c +++ b/drivers/regulator/act8865-regulator.c @@ -62,7 +62,6 @@ #define ACT8865_VOLTAGE_NUM 64 struct act8865 { - struct regulator_dev *rdev[ACT8865_REG_NUM]; struct regmap *regmap; }; @@ -213,7 +212,7 @@ static int act8865_pdata_from_dt(struct device *dev, struct device_node *np; struct act8865_regulator_data *regulator; - np = of_find_node_by_name(dev->of_node, "regulators"); + np = of_get_child_by_name(dev->of_node, "regulators"); if (!np) { dev_err(dev, "missing 'regulators' subnode in DT\n"); return -EINVAL; @@ -221,17 +220,15 @@ static int act8865_pdata_from_dt(struct device *dev, matched = of_regulator_match(dev, np, act8865_matches, ARRAY_SIZE(act8865_matches)); + of_node_put(np); if (matched <= 0) return matched; pdata->regulators = devm_kzalloc(dev, sizeof(struct act8865_regulator_data) * ARRAY_SIZE(act8865_matches), GFP_KERNEL); - if (!pdata->regulators) { - dev_err(dev, "%s: failed to allocate act8865 registor\n", - __func__); + if (!pdata->regulators) return -ENOMEM; - } pdata->num_regulators = matched; regulator = pdata->regulators; @@ -258,7 +255,7 @@ static inline int act8865_pdata_from_dt(struct device *dev, static int act8865_pmic_probe(struct i2c_client *client, const struct i2c_device_id *i2c_id) { - struct regulator_dev **rdev; + struct regulator_dev *rdev; struct device *dev = &client->dev; struct act8865_platform_data *pdata = dev_get_platdata(dev); struct regulator_config config = { }; @@ -292,8 +289,6 @@ static int act8865_pmic_probe(struct i2c_client *client, if (!act8865) return -ENOMEM; - rdev = act8865->rdev; - act8865->regmap = devm_regmap_init_i2c(client, &act8865_regmap_config); if (IS_ERR(act8865->regmap)) { error = PTR_ERR(act8865->regmap); @@ -313,12 +308,12 @@ static int act8865_pmic_probe(struct i2c_client *client, config.driver_data = act8865; config.regmap = act8865->regmap; - rdev[i] = devm_regulator_register(&client->dev, - &act8865_reg[i], &config); - if (IS_ERR(rdev[i])) { + rdev = devm_regulator_register(&client->dev, &act8865_reg[i], + &config); + if (IS_ERR(rdev)) { dev_err(dev, "failed to register %s\n", act8865_reg[id].name); - return PTR_ERR(rdev[i]); + return PTR_ERR(rdev); } } diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c index 862e63e451d0..7c397bb81e01 100644 --- a/drivers/regulator/anatop-regulator.c +++ b/drivers/regulator/anatop-regulator.c @@ -34,6 +34,9 @@ #define LDO_RAMP_UP_UNIT_IN_CYCLES 64 /* 64 cycles per step */ #define LDO_RAMP_UP_FREQ_IN_MHZ 24 /* cycle based on 24M OSC */ +#define LDO_POWER_GATE 0x00 +#define LDO_FET_FULL_ON 0x1f + struct anatop_regulator { const char *name; u32 control_reg; @@ -48,19 +51,10 @@ struct anatop_regulator { int max_voltage; struct regulator_desc rdesc; struct regulator_init_data *initdata; + bool bypass; + int sel; }; -static int anatop_regmap_set_voltage_sel(struct regulator_dev *reg, - unsigned selector) -{ - struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg); - - if (!anatop_reg->control_reg) - return -ENOTSUPP; - - return regulator_set_voltage_sel_regmap(reg, selector); -} - static int anatop_regmap_set_voltage_time_sel(struct regulator_dev *reg, unsigned int old_sel, unsigned int new_sel) @@ -87,22 +81,99 @@ static int anatop_regmap_set_voltage_time_sel(struct regulator_dev *reg, return ret; } -static int anatop_regmap_get_voltage_sel(struct regulator_dev *reg) +static int anatop_regmap_enable(struct regulator_dev *reg) { struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg); + int sel; - if (!anatop_reg->control_reg) - return -ENOTSUPP; + sel = anatop_reg->bypass ? LDO_FET_FULL_ON : anatop_reg->sel; + return regulator_set_voltage_sel_regmap(reg, sel); +} + +static int anatop_regmap_disable(struct regulator_dev *reg) +{ + return regulator_set_voltage_sel_regmap(reg, LDO_POWER_GATE); +} + +static int anatop_regmap_is_enabled(struct regulator_dev *reg) +{ + return regulator_get_voltage_sel_regmap(reg) != LDO_POWER_GATE; +} + +static int anatop_regmap_core_set_voltage_sel(struct regulator_dev *reg, + unsigned selector) +{ + struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg); + int ret; + + if (anatop_reg->bypass || !anatop_regmap_is_enabled(reg)) { + anatop_reg->sel = selector; + return 0; + } + + ret = regulator_set_voltage_sel_regmap(reg, selector); + if (!ret) + anatop_reg->sel = selector; + return ret; +} + +static int anatop_regmap_core_get_voltage_sel(struct regulator_dev *reg) +{ + struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg); + + if (anatop_reg->bypass || !anatop_regmap_is_enabled(reg)) + return anatop_reg->sel; return regulator_get_voltage_sel_regmap(reg); } +static int anatop_regmap_get_bypass(struct regulator_dev *reg, bool *enable) +{ + struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg); + int sel; + + sel = regulator_get_voltage_sel_regmap(reg); + if (sel == LDO_FET_FULL_ON) + WARN_ON(!anatop_reg->bypass); + else if (sel != LDO_POWER_GATE) + WARN_ON(anatop_reg->bypass); + + *enable = anatop_reg->bypass; + return 0; +} + +static int anatop_regmap_set_bypass(struct regulator_dev *reg, bool enable) +{ + struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg); + int sel; + + if (enable == anatop_reg->bypass) + return 0; + + sel = enable ? LDO_FET_FULL_ON : anatop_reg->sel; + anatop_reg->bypass = enable; + + return regulator_set_voltage_sel_regmap(reg, sel); +} + static struct regulator_ops anatop_rops = { - .set_voltage_sel = anatop_regmap_set_voltage_sel, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, +}; + +static struct regulator_ops anatop_core_rops = { + .enable = anatop_regmap_enable, + .disable = anatop_regmap_disable, + .is_enabled = anatop_regmap_is_enabled, + .set_voltage_sel = anatop_regmap_core_set_voltage_sel, .set_voltage_time_sel = anatop_regmap_set_voltage_time_sel, - .get_voltage_sel = anatop_regmap_get_voltage_sel, + .get_voltage_sel = anatop_regmap_core_get_voltage_sel, .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, + .get_bypass = anatop_regmap_get_bypass, + .set_bypass = anatop_regmap_set_bypass, }; static int anatop_regulator_probe(struct platform_device *pdev) @@ -116,6 +187,7 @@ static int anatop_regulator_probe(struct platform_device *pdev) struct regulator_init_data *initdata; struct regulator_config config = { }; int ret = 0; + u32 val; initdata = of_get_regulator_init_data(dev, np); sreg = devm_kzalloc(dev, sizeof(*sreg), GFP_KERNEL); @@ -125,7 +197,6 @@ static int anatop_regulator_probe(struct platform_device *pdev) sreg->name = of_get_property(np, "regulator-name", NULL); rdesc = &sreg->rdesc; rdesc->name = sreg->name; - rdesc->ops = &anatop_rops; rdesc->type = REGULATOR_VOLTAGE; rdesc->owner = THIS_MODULE; @@ -197,6 +268,25 @@ static int anatop_regulator_probe(struct platform_device *pdev) config.of_node = pdev->dev.of_node; config.regmap = sreg->anatop; + /* Only core regulators have the ramp up delay configuration. */ + if (sreg->control_reg && sreg->delay_bit_width) { + rdesc->ops = &anatop_core_rops; + + ret = regmap_read(config.regmap, rdesc->vsel_reg, &val); + if (ret) { + dev_err(dev, "failed to read initial state\n"); + return ret; + } + + sreg->sel = (val & rdesc->vsel_mask) >> sreg->vol_bit_shift; + if (sreg->sel == LDO_FET_FULL_ON) { + sreg->sel = 0; + sreg->bypass = true; + } + } else { + rdesc->ops = &anatop_rops; + } + /* register regulator */ rdev = devm_regulator_register(dev, rdesc, &config); if (IS_ERR(rdev)) { diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c index 4f6c2055f6b2..b1033d30b504 100644 --- a/drivers/regulator/arizona-ldo1.c +++ b/drivers/regulator/arizona-ldo1.c @@ -153,11 +153,9 @@ static const struct regulator_desc arizona_ldo1 = { .vsel_reg = ARIZONA_LDO1_CONTROL_1, .vsel_mask = ARIZONA_LDO1_VSEL_MASK, - .bypass_reg = ARIZONA_LDO1_CONTROL_1, - .bypass_mask = ARIZONA_LDO1_BYPASS, .min_uV = 900000, - .uV_step = 50000, - .n_voltages = 7, + .uV_step = 25000, + .n_voltages = 13, .enable_time = 500, .owner = THIS_MODULE, @@ -189,10 +187,8 @@ static int arizona_ldo1_probe(struct platform_device *pdev) int ret; ldo1 = devm_kzalloc(&pdev->dev, sizeof(*ldo1), GFP_KERNEL); - if (ldo1 == NULL) { - dev_err(&pdev->dev, "Unable to allocate private data\n"); + if (!ldo1) return -ENOMEM; - } ldo1->arizona = arizona; @@ -203,6 +199,7 @@ static int arizona_ldo1_probe(struct platform_device *pdev) */ switch (arizona->type) { case WM5102: + case WM8997: desc = &arizona_ldo1_hc; ldo1->init_data = arizona_ldo1_dvfs; break; diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c index 034ece707083..6fdd9bf6927f 100644 --- a/drivers/regulator/arizona-micsupp.c +++ b/drivers/regulator/arizona-micsupp.c @@ -204,10 +204,8 @@ static int arizona_micsupp_probe(struct platform_device *pdev) int ret; micsupp = devm_kzalloc(&pdev->dev, sizeof(*micsupp), GFP_KERNEL); - if (micsupp == NULL) { - dev_err(&pdev->dev, "Unable to allocate private data\n"); + if (!micsupp) return -ENOMEM; - } micsupp->arizona = arizona; INIT_WORK(&micsupp->check_cp_work, arizona_micsupp_check_cp); diff --git a/drivers/regulator/as3711-regulator.c b/drivers/regulator/as3711-regulator.c index c77a58478cca..b47283f91e2d 100644 --- a/drivers/regulator/as3711-regulator.c +++ b/drivers/regulator/as3711-regulator.c @@ -191,7 +191,7 @@ static int as3711_regulator_parse_dt(struct device *dev, { struct as3711_regulator_pdata *pdata = dev_get_platdata(dev); struct device_node *regulators = - of_find_node_by_name(dev->parent->of_node, "regulators"); + of_get_child_by_name(dev->parent->of_node, "regulators"); struct of_regulator_match *match; int ret, i; @@ -221,7 +221,6 @@ static int as3711_regulator_probe(struct platform_device *pdev) { struct as3711_regulator_pdata *pdata = dev_get_platdata(&pdev->dev); struct as3711 *as3711 = dev_get_drvdata(pdev->dev.parent); - struct regulator_init_data *reg_data; struct regulator_config config = {.dev = &pdev->dev,}; struct as3711_regulator *reg = NULL; struct as3711_regulator *regs; @@ -246,22 +245,14 @@ static int as3711_regulator_probe(struct platform_device *pdev) regs = devm_kzalloc(&pdev->dev, AS3711_REGULATOR_NUM * sizeof(struct as3711_regulator), GFP_KERNEL); - if (!regs) { - dev_err(&pdev->dev, "Memory allocation failed exiting..\n"); + if (!regs) return -ENOMEM; - } for (id = 0, ri = as3711_reg_info; id < AS3711_REGULATOR_NUM; ++id, ri++) { - reg_data = pdata->init_data[id]; - - /* No need to register if there is no regulator data */ - if (!reg_data) - continue; - reg = ®s[id]; reg->reg_info = ri; - config.init_data = reg_data; + config.init_data = pdata->init_data[id]; config.driver_data = reg; config.regmap = as3711->regmap; config.of_node = of_node[id]; diff --git a/drivers/regulator/as3722-regulator.c b/drivers/regulator/as3722-regulator.c index 8b17d786cb71..85585219ce82 100644 --- a/drivers/regulator/as3722-regulator.c +++ b/drivers/regulator/as3722-regulator.c @@ -719,6 +719,7 @@ static int as3722_get_regulator_dt_data(struct platform_device *pdev, ret = of_regulator_match(&pdev->dev, np, as3722_regulator_matches, ARRAY_SIZE(as3722_regulator_matches)); + of_node_put(np); if (ret < 0) { dev_err(&pdev->dev, "Parsing of regulator node failed: %d\n", ret); diff --git a/drivers/regulator/bcm590xx-regulator.c b/drivers/regulator/bcm590xx-regulator.c new file mode 100644 index 000000000000..ab08ca7cfb08 --- /dev/null +++ b/drivers/regulator/bcm590xx-regulator.c @@ -0,0 +1,403 @@ +/* + * Broadcom BCM590xx regulator driver + * + * Copyright 2014 Linaro Limited + * Author: Matt Porter <mporter@linaro.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/mfd/bcm590xx.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h> +#include <linux/slab.h> + +/* Register defs */ +#define BCM590XX_RFLDOPMCTRL1 0x60 +#define BCM590XX_IOSR1PMCTRL1 0x7a +#define BCM590XX_IOSR2PMCTRL1 0x7c +#define BCM590XX_CSRPMCTRL1 0x7e +#define BCM590XX_SDSR1PMCTRL1 0x82 +#define BCM590XX_SDSR2PMCTRL1 0x86 +#define BCM590XX_MSRPMCTRL1 0x8a +#define BCM590XX_VSRPMCTRL1 0x8e +#define BCM590XX_REG_ENABLE BIT(7) + +#define BCM590XX_RFLDOCTRL 0x96 +#define BCM590XX_CSRVOUT1 0xc0 +#define BCM590XX_LDO_VSEL_MASK GENMASK(5, 3) +#define BCM590XX_SR_VSEL_MASK GENMASK(5, 0) + +/* LDO regulator IDs */ +#define BCM590XX_REG_RFLDO 0 +#define BCM590XX_REG_CAMLDO1 1 +#define BCM590XX_REG_CAMLDO2 2 +#define BCM590XX_REG_SIMLDO1 3 +#define BCM590XX_REG_SIMLDO2 4 +#define BCM590XX_REG_SDLDO 5 +#define BCM590XX_REG_SDXLDO 6 +#define BCM590XX_REG_MMCLDO1 7 +#define BCM590XX_REG_MMCLDO2 8 +#define BCM590XX_REG_AUDLDO 9 +#define BCM590XX_REG_MICLDO 10 +#define BCM590XX_REG_USBLDO 11 +#define BCM590XX_REG_VIBLDO 12 + +/* DCDC regulator IDs */ +#define BCM590XX_REG_CSR 13 +#define BCM590XX_REG_IOSR1 14 +#define BCM590XX_REG_IOSR2 15 +#define BCM590XX_REG_MSR 16 +#define BCM590XX_REG_SDSR1 17 +#define BCM590XX_REG_SDSR2 18 +#define BCM590XX_REG_VSR 19 + +#define BCM590XX_NUM_REGS 20 + +#define BCM590XX_REG_IS_LDO(n) (n < BCM590XX_REG_CSR) + +struct bcm590xx_board { + struct regulator_init_data *bcm590xx_pmu_init_data[BCM590XX_NUM_REGS]; +}; + +/* LDO group A: supported voltages in microvolts */ +static const unsigned int ldo_a_table[] = { + 1200000, 1800000, 2500000, 2700000, 2800000, + 2900000, 3000000, 3300000, +}; + +/* LDO group C: supported voltages in microvolts */ +static const unsigned int ldo_c_table[] = { + 3100000, 1800000, 2500000, 2700000, 2800000, + 2900000, 3000000, 3300000, +}; + +/* DCDC group CSR: supported voltages in microvolts */ +static const struct regulator_linear_range dcdc_csr_ranges[] = { + REGULATOR_LINEAR_RANGE(860000, 2, 50, 10000), + REGULATOR_LINEAR_RANGE(1360000, 51, 55, 20000), + REGULATOR_LINEAR_RANGE(900000, 56, 63, 0), +}; + +/* DCDC group IOSR1: supported voltages in microvolts */ +static const struct regulator_linear_range dcdc_iosr1_ranges[] = { + REGULATOR_LINEAR_RANGE(860000, 2, 51, 10000), + REGULATOR_LINEAR_RANGE(1500000, 52, 52, 0), + REGULATOR_LINEAR_RANGE(1800000, 53, 53, 0), + REGULATOR_LINEAR_RANGE(900000, 54, 63, 0), +}; + +/* DCDC group SDSR1: supported voltages in microvolts */ +static const struct regulator_linear_range dcdc_sdsr1_ranges[] = { + REGULATOR_LINEAR_RANGE(860000, 2, 50, 10000), + REGULATOR_LINEAR_RANGE(1340000, 51, 51, 0), + REGULATOR_LINEAR_RANGE(900000, 52, 63, 0), +}; + +struct bcm590xx_info { + const char *name; + const char *vin_name; + u8 n_voltages; + const unsigned int *volt_table; + u8 n_linear_ranges; + const struct regulator_linear_range *linear_ranges; +}; + +#define BCM590XX_REG_TABLE(_name, _table) \ + { \ + .name = #_name, \ + .n_voltages = ARRAY_SIZE(_table), \ + .volt_table = _table, \ + } + +#define BCM590XX_REG_RANGES(_name, _ranges) \ + { \ + .name = #_name, \ + .n_linear_ranges = ARRAY_SIZE(_ranges), \ + .linear_ranges = _ranges, \ + } + +static struct bcm590xx_info bcm590xx_regs[] = { + BCM590XX_REG_TABLE(rfldo, ldo_a_table), + BCM590XX_REG_TABLE(camldo1, ldo_c_table), + BCM590XX_REG_TABLE(camldo2, ldo_c_table), + BCM590XX_REG_TABLE(simldo1, ldo_a_table), + BCM590XX_REG_TABLE(simldo2, ldo_a_table), + BCM590XX_REG_TABLE(sdldo, ldo_c_table), + BCM590XX_REG_TABLE(sdxldo, ldo_a_table), + BCM590XX_REG_TABLE(mmcldo1, ldo_a_table), + BCM590XX_REG_TABLE(mmcldo2, ldo_a_table), + BCM590XX_REG_TABLE(audldo, ldo_a_table), + BCM590XX_REG_TABLE(micldo, ldo_a_table), + BCM590XX_REG_TABLE(usbldo, ldo_a_table), + BCM590XX_REG_TABLE(vibldo, ldo_c_table), + BCM590XX_REG_RANGES(csr, dcdc_csr_ranges), + BCM590XX_REG_RANGES(iosr1, dcdc_iosr1_ranges), + BCM590XX_REG_RANGES(iosr2, dcdc_iosr1_ranges), + BCM590XX_REG_RANGES(msr, dcdc_iosr1_ranges), + BCM590XX_REG_RANGES(sdsr1, dcdc_sdsr1_ranges), + BCM590XX_REG_RANGES(sdsr2, dcdc_iosr1_ranges), + BCM590XX_REG_RANGES(vsr, dcdc_iosr1_ranges), +}; + +struct bcm590xx_reg { + struct regulator_desc *desc; + struct bcm590xx *mfd; + struct bcm590xx_info **info; +}; + +static int bcm590xx_get_vsel_register(int id) +{ + if (BCM590XX_REG_IS_LDO(id)) + return BCM590XX_RFLDOCTRL + id; + else + return BCM590XX_CSRVOUT1 + (id - BCM590XX_REG_CSR) * 3; +} + +static int bcm590xx_get_enable_register(int id) +{ + int reg = 0; + + if (BCM590XX_REG_IS_LDO(id)) + reg = BCM590XX_RFLDOPMCTRL1 + id * 2; + else + switch (id) { + case BCM590XX_REG_CSR: + reg = BCM590XX_CSRPMCTRL1; + break; + case BCM590XX_REG_IOSR1: + reg = BCM590XX_IOSR1PMCTRL1; + break; + case BCM590XX_REG_IOSR2: + reg = BCM590XX_IOSR2PMCTRL1; + break; + case BCM590XX_REG_MSR: + reg = BCM590XX_MSRPMCTRL1; + break; + case BCM590XX_REG_SDSR1: + reg = BCM590XX_SDSR1PMCTRL1; + break; + case BCM590XX_REG_SDSR2: + reg = BCM590XX_SDSR2PMCTRL1; + break; + }; + + return reg; +} + +static struct regulator_ops bcm590xx_ops_ldo = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_iterate, +}; + +static struct regulator_ops bcm590xx_ops_dcdc = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, +}; + +#define BCM590XX_MATCH(_name, _id) \ + { \ + .name = #_name, \ + .driver_data = (void *)&bcm590xx_regs[BCM590XX_REG_##_id], \ + } + +static struct of_regulator_match bcm590xx_matches[] = { + BCM590XX_MATCH(rfldo, RFLDO), + BCM590XX_MATCH(camldo1, CAMLDO1), + BCM590XX_MATCH(camldo2, CAMLDO2), + BCM590XX_MATCH(simldo1, SIMLDO1), + BCM590XX_MATCH(simldo2, SIMLDO2), + BCM590XX_MATCH(sdldo, SDLDO), + BCM590XX_MATCH(sdxldo, SDXLDO), + BCM590XX_MATCH(mmcldo1, MMCLDO1), + BCM590XX_MATCH(mmcldo2, MMCLDO2), + BCM590XX_MATCH(audldo, AUDLDO), + BCM590XX_MATCH(micldo, MICLDO), + BCM590XX_MATCH(usbldo, USBLDO), + BCM590XX_MATCH(vibldo, VIBLDO), + BCM590XX_MATCH(csr, CSR), + BCM590XX_MATCH(iosr1, IOSR1), + BCM590XX_MATCH(iosr2, IOSR2), + BCM590XX_MATCH(msr, MSR), + BCM590XX_MATCH(sdsr1, SDSR1), + BCM590XX_MATCH(sdsr2, SDSR2), + BCM590XX_MATCH(vsr, VSR), +}; + +static struct bcm590xx_board *bcm590xx_parse_dt_reg_data( + struct platform_device *pdev, + struct of_regulator_match **bcm590xx_reg_matches) +{ + struct bcm590xx_board *data; + struct device_node *np = pdev->dev.parent->of_node; + struct device_node *regulators; + struct of_regulator_match *matches = bcm590xx_matches; + int count = ARRAY_SIZE(bcm590xx_matches); + int idx = 0; + int ret; + + if (!np) { + dev_err(&pdev->dev, "of node not found\n"); + return NULL; + } + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(&pdev->dev, "failed to allocate regulator board data\n"); + return NULL; + } + + np = of_node_get(np); + regulators = of_get_child_by_name(np, "regulators"); + if (!regulators) { + dev_warn(&pdev->dev, "regulator node not found\n"); + return NULL; + } + + ret = of_regulator_match(&pdev->dev, regulators, matches, count); + of_node_put(regulators); + if (ret < 0) { + dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", + ret); + return NULL; + } + + *bcm590xx_reg_matches = matches; + + for (idx = 0; idx < count; idx++) { + if (!matches[idx].init_data || !matches[idx].of_node) + continue; + + data->bcm590xx_pmu_init_data[idx] = matches[idx].init_data; + } + + return data; +} + +static int bcm590xx_probe(struct platform_device *pdev) +{ + struct bcm590xx *bcm590xx = dev_get_drvdata(pdev->dev.parent); + struct bcm590xx_board *pmu_data = NULL; + struct bcm590xx_reg *pmu; + struct regulator_config config = { }; + struct bcm590xx_info *info; + struct regulator_init_data *reg_data; + struct regulator_dev *rdev; + struct of_regulator_match *bcm590xx_reg_matches = NULL; + int i; + + pmu_data = bcm590xx_parse_dt_reg_data(pdev, + &bcm590xx_reg_matches); + + pmu = devm_kzalloc(&pdev->dev, sizeof(*pmu), GFP_KERNEL); + if (!pmu) { + dev_err(&pdev->dev, "Memory allocation failed for pmu\n"); + return -ENOMEM; + } + + pmu->mfd = bcm590xx; + + platform_set_drvdata(pdev, pmu); + + pmu->desc = devm_kzalloc(&pdev->dev, BCM590XX_NUM_REGS * + sizeof(struct regulator_desc), GFP_KERNEL); + if (!pmu->desc) { + dev_err(&pdev->dev, "Memory alloc fails for desc\n"); + return -ENOMEM; + } + + pmu->info = devm_kzalloc(&pdev->dev, BCM590XX_NUM_REGS * + sizeof(struct bcm590xx_info *), GFP_KERNEL); + if (!pmu->info) { + dev_err(&pdev->dev, "Memory alloc fails for info\n"); + return -ENOMEM; + } + + info = bcm590xx_regs; + + for (i = 0; i < BCM590XX_NUM_REGS; i++, info++) { + if (pmu_data) + reg_data = pmu_data->bcm590xx_pmu_init_data[i]; + else + reg_data = NULL; + + /* Register the regulators */ + pmu->info[i] = info; + + pmu->desc[i].name = info->name; + pmu->desc[i].supply_name = info->vin_name; + pmu->desc[i].id = i; + pmu->desc[i].volt_table = info->volt_table; + pmu->desc[i].n_voltages = info->n_voltages; + pmu->desc[i].linear_ranges = info->linear_ranges; + pmu->desc[i].n_linear_ranges = info->n_linear_ranges; + + if (BCM590XX_REG_IS_LDO(i)) { + pmu->desc[i].ops = &bcm590xx_ops_ldo; + pmu->desc[i].vsel_mask = BCM590XX_LDO_VSEL_MASK; + } else { + pmu->desc[i].ops = &bcm590xx_ops_dcdc; + pmu->desc[i].vsel_mask = BCM590XX_SR_VSEL_MASK; + } + + pmu->desc[i].vsel_reg = bcm590xx_get_vsel_register(i); + pmu->desc[i].enable_is_inverted = true; + pmu->desc[i].enable_mask = BCM590XX_REG_ENABLE; + pmu->desc[i].enable_reg = bcm590xx_get_enable_register(i); + pmu->desc[i].type = REGULATOR_VOLTAGE; + pmu->desc[i].owner = THIS_MODULE; + + config.dev = bcm590xx->dev; + config.init_data = reg_data; + config.driver_data = pmu; + config.regmap = bcm590xx->regmap; + + if (bcm590xx_reg_matches) + config.of_node = bcm590xx_reg_matches[i].of_node; + + rdev = devm_regulator_register(&pdev->dev, &pmu->desc[i], + &config); + if (IS_ERR(rdev)) { + dev_err(bcm590xx->dev, + "failed to register %s regulator\n", + pdev->name); + return PTR_ERR(rdev); + } + } + + return 0; +} + +static struct platform_driver bcm590xx_regulator_driver = { + .driver = { + .name = "bcm590xx-vregs", + .owner = THIS_MODULE, + }, + .probe = bcm590xx_probe, +}; +module_platform_driver(bcm590xx_regulator_driver); + +MODULE_AUTHOR("Matt Porter <mporter@linaro.org>"); +MODULE_DESCRIPTION("BCM590xx voltage regulator driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:bcm590xx-vregs"); diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index b38a6b669e8c..bac485acc7f3 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -953,6 +953,8 @@ static int machine_constraints_current(struct regulator_dev *rdev, return 0; } +static int _regulator_do_enable(struct regulator_dev *rdev); + /** * set_machine_constraints - sets regulator constraints * @rdev: regulator source @@ -1013,10 +1015,9 @@ static int set_machine_constraints(struct regulator_dev *rdev, /* If the constraints say the regulator should be on at this point * and we have control then make sure it is enabled. */ - if ((rdev->constraints->always_on || rdev->constraints->boot_on) && - ops->enable) { - ret = ops->enable(rdev); - if (ret < 0) { + if (rdev->constraints->always_on || rdev->constraints->boot_on) { + ret = _regulator_do_enable(rdev); + if (ret < 0 && ret != -EINVAL) { rdev_err(rdev, "failed to enable\n"); goto out; } @@ -1272,6 +1273,8 @@ static struct regulator_dev *regulator_dev_lookup(struct device *dev, if (r->dev.parent && node == r->dev.of_node) return r; + *ret = -EPROBE_DEFER; + return NULL; } else { /* * If we couldn't even get the node then it's @@ -1312,7 +1315,7 @@ static struct regulator *_regulator_get(struct device *dev, const char *id, struct regulator_dev *rdev; struct regulator *regulator = ERR_PTR(-EPROBE_DEFER); const char *devname = NULL; - int ret = -EPROBE_DEFER; + int ret; if (id == NULL) { pr_err("get() with no identifier\n"); @@ -1322,6 +1325,11 @@ static struct regulator *_regulator_get(struct device *dev, const char *id, if (dev) devname = dev_name(dev); + if (have_full_constraints()) + ret = -ENODEV; + else + ret = -EPROBE_DEFER; + mutex_lock(®ulator_list_mutex); rdev = regulator_dev_lookup(dev, id, &ret); @@ -1352,7 +1360,7 @@ static struct regulator *_regulator_get(struct device *dev, const char *id, goto found; /* Don't log an error when called from regulator_get_optional() */ } else if (!have_full_constraints() || exclusive) { - dev_err(dev, "dummy supplies not allowed\n"); + dev_warn(dev, "dummy supplies not allowed\n"); } mutex_unlock(®ulator_list_mutex); @@ -1900,8 +1908,6 @@ static int _regulator_do_disable(struct regulator_dev *rdev) trace_regulator_disable_complete(rdev_get_name(rdev)); - _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE, - NULL); return 0; } @@ -1925,6 +1931,8 @@ static int _regulator_disable(struct regulator_dev *rdev) rdev_err(rdev, "failed to disable\n"); return ret; } + _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE, + NULL); } rdev->use_count = 0; @@ -1977,20 +1985,16 @@ static int _regulator_force_disable(struct regulator_dev *rdev) { int ret = 0; - /* force disable */ - if (rdev->desc->ops->disable) { - /* ah well, who wants to live forever... */ - ret = rdev->desc->ops->disable(rdev); - if (ret < 0) { - rdev_err(rdev, "failed to force disable\n"); - return ret; - } - /* notify other consumers that power has been forced off */ - _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE | - REGULATOR_EVENT_DISABLE, NULL); + ret = _regulator_do_disable(rdev); + if (ret < 0) { + rdev_err(rdev, "failed to force disable\n"); + return ret; } - return ret; + _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE | + REGULATOR_EVENT_DISABLE, NULL); + + return 0; } /** @@ -2395,6 +2399,7 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV) struct regulator_dev *rdev = regulator->rdev; int ret = 0; int old_min_uV, old_max_uV; + int current_uV; mutex_lock(&rdev->mutex); @@ -2405,6 +2410,19 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV) if (regulator->min_uV == min_uV && regulator->max_uV == max_uV) goto out; + /* If we're trying to set a range that overlaps the current voltage, + * return succesfully even though the regulator does not support + * changing the voltage. + */ + if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) { + current_uV = _regulator_get_voltage(rdev); + if (min_uV <= current_uV && current_uV <= max_uV) { + regulator->min_uV = min_uV; + regulator->max_uV = max_uV; + goto out; + } + } + /* sanity check */ if (!rdev->desc->ops->set_voltage && !rdev->desc->ops->set_voltage_sel) { @@ -3623,23 +3641,18 @@ int regulator_suspend_finish(void) mutex_lock(®ulator_list_mutex); list_for_each_entry(rdev, ®ulator_list, list) { - struct regulator_ops *ops = rdev->desc->ops; - mutex_lock(&rdev->mutex); - if ((rdev->use_count > 0 || rdev->constraints->always_on) && - ops->enable) { - error = ops->enable(rdev); + if (rdev->use_count > 0 || rdev->constraints->always_on) { + error = _regulator_do_enable(rdev); if (error) ret = error; } else { if (!have_full_constraints()) goto unlock; - if (!ops->disable) - goto unlock; if (!_regulator_is_enabled(rdev)) goto unlock; - error = ops->disable(rdev); + error = _regulator_do_disable(rdev); if (error) ret = error; } @@ -3813,7 +3826,7 @@ static int __init regulator_init_complete(void) ops = rdev->desc->ops; c = rdev->constraints; - if (!ops->disable || (c && c->always_on)) + if (c && c->always_on) continue; mutex_lock(&rdev->mutex); @@ -3834,7 +3847,7 @@ static int __init regulator_init_complete(void) /* We log since this may kill the system if it * goes wrong. */ rdev_info(rdev, "disabling\n"); - ret = ops->disable(rdev); + ret = _regulator_do_disable(rdev); if (ret != 0) rdev_err(rdev, "couldn't disable: %d\n", ret); } else { diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c index 3adeaeffc485..fdb6ea8ae7e6 100644 --- a/drivers/regulator/da9052-regulator.c +++ b/drivers/regulator/da9052-regulator.c @@ -240,6 +240,31 @@ static int da9052_regulator_set_voltage_sel(struct regulator_dev *rdev, return ret; } +static int da9052_regulator_set_voltage_time_sel(struct regulator_dev *rdev, + unsigned int old_sel, + unsigned int new_sel) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int id = rdev_get_id(rdev); + int ret = 0; + + /* The DVC controlled LDOs and DCDCs ramp with 6.25mV/µs after enabling + * the activate bit. + */ + switch (id) { + case DA9052_ID_BUCK1: + case DA9052_ID_BUCK2: + case DA9052_ID_BUCK3: + case DA9052_ID_LDO2: + case DA9052_ID_LDO3: + ret = (new_sel - old_sel) * info->step_uV / 6250; + break; + } + + return ret; +} + static struct regulator_ops da9052_dcdc_ops = { .get_current_limit = da9052_dcdc_get_current_limit, .set_current_limit = da9052_dcdc_set_current_limit, @@ -248,6 +273,7 @@ static struct regulator_ops da9052_dcdc_ops = { .map_voltage = da9052_map_voltage, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = da9052_regulator_set_voltage_sel, + .set_voltage_time_sel = da9052_regulator_set_voltage_time_sel, .is_enabled = regulator_is_enabled_regmap, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, @@ -258,6 +284,7 @@ static struct regulator_ops da9052_ldo_ops = { .map_voltage = da9052_map_voltage, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = da9052_regulator_set_voltage_sel, + .set_voltage_time_sel = da9052_regulator_set_voltage_time_sel, .is_enabled = regulator_is_enabled_regmap, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, @@ -401,7 +428,7 @@ static int da9052_regulator_probe(struct platform_device *pdev) if (!nproot) return -ENODEV; - nproot = of_find_node_by_name(nproot, "regulators"); + nproot = of_get_child_by_name(nproot, "regulators"); if (!nproot) return -ENODEV; diff --git a/drivers/regulator/da9055-regulator.c b/drivers/regulator/da9055-regulator.c index 7f340206d329..9516317e1a9f 100644 --- a/drivers/regulator/da9055-regulator.c +++ b/drivers/regulator/da9055-regulator.c @@ -19,6 +19,8 @@ #include <linux/platform_device.h> #include <linux/regulator/driver.h> #include <linux/regulator/machine.h> +#include <linux/of.h> +#include <linux/regulator/of_regulator.h> #include <linux/mfd/da9055/core.h> #include <linux/mfd/da9055/reg.h> @@ -446,6 +448,9 @@ static int da9055_gpio_init(struct da9055_regulator *regulator, struct da9055_regulator_info *info = regulator->info; int ret = 0; + if (!pdata) + return 0; + if (pdata->gpio_ren && pdata->gpio_ren[id]) { char name[18]; int gpio_mux = pdata->gpio_ren[id]; @@ -530,6 +535,59 @@ static inline struct da9055_regulator_info *find_regulator_info(int id) return NULL; } +#ifdef CONFIG_OF +static struct of_regulator_match da9055_reg_matches[] = { + { .name = "BUCK1", }, + { .name = "BUCK2", }, + { .name = "LDO1", }, + { .name = "LDO2", }, + { .name = "LDO3", }, + { .name = "LDO4", }, + { .name = "LDO5", }, + { .name = "LDO6", }, +}; + +static int da9055_regulator_dt_init(struct platform_device *pdev, + struct da9055_regulator *regulator, + struct regulator_config *config, + int regid) +{ + struct device_node *nproot, *np; + int ret; + + nproot = of_node_get(pdev->dev.parent->of_node); + if (!nproot) + return -ENODEV; + + np = of_get_child_by_name(nproot, "regulators"); + if (!np) + return -ENODEV; + + ret = of_regulator_match(&pdev->dev, np, &da9055_reg_matches[regid], 1); + of_node_put(nproot); + if (ret < 0) { + dev_err(&pdev->dev, "Error matching regulator: %d\n", ret); + return ret; + } + + config->init_data = da9055_reg_matches[regid].init_data; + config->of_node = da9055_reg_matches[regid].of_node; + + if (!config->of_node) + return -ENODEV; + + return 0; +} +#else +static inline int da9055_regulator_dt_init(struct platform_device *pdev, + struct da9055_regulator *regulator, + struct regulator_config *config, + int regid) +{ + return -ENODEV; +} +#endif /* CONFIG_OF */ + static int da9055_regulator_probe(struct platform_device *pdev) { struct regulator_config config = { }; @@ -538,9 +596,6 @@ static int da9055_regulator_probe(struct platform_device *pdev) struct da9055_pdata *pdata = dev_get_platdata(da9055->dev); int ret, irq; - if (pdata == NULL || pdata->regulators[pdev->id] == NULL) - return -ENODEV; - regulator = devm_kzalloc(&pdev->dev, sizeof(struct da9055_regulator), GFP_KERNEL); if (!regulator) @@ -557,8 +612,14 @@ static int da9055_regulator_probe(struct platform_device *pdev) config.driver_data = regulator; config.regmap = da9055->regmap; - if (pdata && pdata->regulators) + if (pdata && pdata->regulators) { config.init_data = pdata->regulators[pdev->id]; + } else { + ret = da9055_regulator_dt_init(pdev, regulator, &config, + pdev->id); + if (ret < 0) + return ret; + } ret = da9055_gpio_init(regulator, &config, pdata, pdev->id); if (ret < 0) @@ -576,7 +637,9 @@ static int da9055_regulator_probe(struct platform_device *pdev) /* Only LDO 5 and 6 has got the over current interrupt */ if (pdev->id == DA9055_ID_LDO5 || pdev->id == DA9055_ID_LDO6) { irq = platform_get_irq_byname(pdev, "REGULATOR"); - irq = regmap_irq_get_virq(da9055->irq_data, irq); + if (irq < 0) + return irq; + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, da9055_ldo5_6_oc_irq, IRQF_TRIGGER_HIGH | diff --git a/drivers/regulator/da9063-regulator.c b/drivers/regulator/da9063-regulator.c index 6027bd5acc3e..7c9461d13313 100644 --- a/drivers/regulator/da9063-regulator.c +++ b/drivers/regulator/da9063-regulator.c @@ -1,3 +1,4 @@ + /* * Regulator driver for DA9063 PMIC series * @@ -60,7 +61,8 @@ struct da9063_regulator_info { .desc.ops = &da9063_ldo_ops, \ .desc.min_uV = (min_mV) * 1000, \ .desc.uV_step = (step_mV) * 1000, \ - .desc.n_voltages = (((max_mV) - (min_mV))/(step_mV) + 1), \ + .desc.n_voltages = (((max_mV) - (min_mV))/(step_mV) + 1 \ + + (DA9063_V##regl_name##_BIAS)), \ .desc.enable_reg = DA9063_REG_##regl_name##_CONT, \ .desc.enable_mask = DA9063_LDO_EN, \ .desc.vsel_reg = DA9063_REG_V##regl_name##_A, \ diff --git a/drivers/regulator/da9210-regulator.c b/drivers/regulator/da9210-regulator.c index 6f5ecbe1132e..7a320dd11c46 100644 --- a/drivers/regulator/da9210-regulator.c +++ b/drivers/regulator/da9210-regulator.c @@ -134,11 +134,8 @@ static int da9210_i2c_probe(struct i2c_client *i2c, int error; chip = devm_kzalloc(&i2c->dev, sizeof(struct da9210), GFP_KERNEL); - if (NULL == chip) { - dev_err(&i2c->dev, - "Cannot kzalloc memory for regulator structure\n"); + if (!chip) return -ENOMEM; - } chip->regmap = devm_regmap_init_i2c(i2c, &da9210_regmap_config); if (IS_ERR(chip->regmap)) { diff --git a/drivers/regulator/db8500-prcmu.c b/drivers/regulator/db8500-prcmu.c index 846acf240e48..617c1adca816 100644 --- a/drivers/regulator/db8500-prcmu.c +++ b/drivers/regulator/db8500-prcmu.c @@ -263,6 +263,8 @@ dbx500_regulator_info[DB8500_NUM_REGULATORS] = { .ops = &db8500_regulator_ops, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, + .fixed_uV = 1800000, + .n_voltages = 1, }, .exclude_from_power_state = true, }, diff --git a/drivers/regulator/dbx500-prcmu.c b/drivers/regulator/dbx500-prcmu.c index ce89f7848a57..2d16b9f16de7 100644 --- a/drivers/regulator/dbx500-prcmu.c +++ b/drivers/regulator/dbx500-prcmu.c @@ -78,6 +78,7 @@ static struct ux500_regulator_debug { void ux500_regulator_suspend_debug(void) { int i; + for (i = 0; i < rdebug.num_regulators; i++) rdebug.state_before_suspend[i] = rdebug.regulator_array[i].is_enabled; @@ -86,6 +87,7 @@ void ux500_regulator_suspend_debug(void) void ux500_regulator_resume_debug(void) { int i; + for (i = 0; i < rdebug.num_regulators; i++) rdebug.state_after_suspend[i] = rdebug.regulator_array[i].is_enabled; @@ -127,9 +129,9 @@ static int ux500_regulator_status_print(struct seq_file *s, void *p) int i; /* print dump header */ - err = seq_printf(s, "ux500-regulator status:\n"); + err = seq_puts(s, "ux500-regulator status:\n"); if (err < 0) - dev_err(dev, "seq_printf overflow\n"); + dev_err(dev, "seq_puts overflow\n"); err = seq_printf(s, "%31s : %8s : %8s\n", "current", "before", "after"); @@ -202,18 +204,12 @@ ux500_regulator_debug_init(struct platform_device *pdev, rdebug.num_regulators = num_regulators; rdebug.state_before_suspend = kzalloc(num_regulators, GFP_KERNEL); - if (!rdebug.state_before_suspend) { - dev_err(&pdev->dev, - "could not allocate memory for saving state\n"); + if (!rdebug.state_before_suspend) goto exit_destroy_power_state; - } rdebug.state_after_suspend = kzalloc(num_regulators, GFP_KERNEL); - if (!rdebug.state_after_suspend) { - dev_err(&pdev->dev, - "could not allocate memory for saving state\n"); + if (!rdebug.state_after_suspend) goto exit_free; - } dbx500_regulator_testcase(regulator_info, num_regulators); return 0; diff --git a/drivers/regulator/dummy.c b/drivers/regulator/dummy.c index df9f42524abb..2436db9e2ca3 100644 --- a/drivers/regulator/dummy.c +++ b/drivers/regulator/dummy.c @@ -25,7 +25,11 @@ struct regulator_dev *dummy_regulator_rdev; -static struct regulator_init_data dummy_initdata; +static struct regulator_init_data dummy_initdata = { + .constraints = { + .always_on = 1, + }, +}; static struct regulator_ops dummy_ops; diff --git a/drivers/regulator/max14577.c b/drivers/regulator/max14577.c index b1078ba3f393..e0619526708c 100644 --- a/drivers/regulator/max14577.c +++ b/drivers/regulator/max14577.c @@ -166,12 +166,14 @@ static int max14577_regulator_dt_parse_pdata(struct platform_device *pdev) ret = of_regulator_match(&pdev->dev, np, max14577_regulator_matches, MAX14577_REG_MAX); - if (ret < 0) { + if (ret < 0) dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", ret); - return ret; - } + else + ret = 0; - return 0; + of_node_put(np); + + return ret; } static inline struct regulator_init_data *match_init_data(int index) diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index ab174f20ca11..b699d4e7acc5 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -92,7 +92,7 @@ MODULE_DEVICE_TABLE(of, pfuze_dt_ids); static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) { struct pfuze_chip *pfuze100 = rdev_get_drvdata(rdev); - int id = rdev->desc->id; + int id = rdev_get_id(rdev); unsigned int ramp_bits; int ret; diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index d9e557990577..89966213315c 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -65,7 +65,7 @@ static int s2mps11_regulator_set_voltage_time_sel(struct regulator_dev *rdev, unsigned int ramp_delay = 0; int old_volt, new_volt; - switch (rdev->desc->id) { + switch (rdev_get_id(rdev)) { case S2MPS11_BUCK2: ramp_delay = s2mps11->ramp_delay2; break; @@ -105,7 +105,7 @@ static int s2mps11_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) unsigned int ramp_enable = 1, enable_shift = 0; int ret; - switch (rdev->desc->id) { + switch (rdev_get_id(rdev)) { case S2MPS11_BUCK1: if (ramp_delay > s2mps11->ramp_delay16) s2mps11->ramp_delay16 = ramp_delay; @@ -441,6 +441,7 @@ common_reg: for (i = 0; i < S2MPS11_REGULATOR_MAX; i++) { if (!reg_np) { config.init_data = pdata->regulators[i].initdata; + config.of_node = pdata->regulators[i].reg_node; } else { config.init_data = rdata[i].init_data; config.of_node = rdata[i].of_node; diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c index d7164bb75d3e..d958dfa05125 100644 --- a/drivers/regulator/s5m8767.c +++ b/drivers/regulator/s5m8767.c @@ -535,7 +535,7 @@ static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev, return -ENODEV; } - regulators_np = of_find_node_by_name(pmic_np, "regulators"); + regulators_np = of_get_child_by_name(pmic_np, "regulators"); if (!regulators_np) { dev_err(iodev->dev, "could not find regulators sub-node\n"); return -EINVAL; @@ -591,6 +591,8 @@ static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev, rmode++; } + of_node_put(regulators_np); + if (of_get_property(pmic_np, "s5m8767,pmic-buck2-uses-gpio-dvs", NULL)) { pdata->buck2_gpiodvs = true; |