summaryrefslogtreecommitdiffstats
path: root/drivers/power
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/power')
-rw-r--r--drivers/power/reset/Kconfig7
-rw-r--r--drivers/power/reset/Makefile1
-rw-r--r--drivers/power/reset/ltc2952-poweroff.c3
-rw-r--r--drivers/power/reset/oxnas-restart.c233
-rw-r--r--drivers/power/reset/qcom-pon.c3
-rw-r--r--drivers/power/reset/syscon-reboot.c7
-rw-r--r--drivers/power/supply/88pm860x_battery.c8
-rw-r--r--drivers/power/supply/Kconfig49
-rw-r--r--drivers/power/supply/Makefile2
-rw-r--r--drivers/power/supply/ab8500_fg.c2
-rw-r--r--drivers/power/supply/axp288_charger.c5
-rw-r--r--drivers/power/supply/axp288_fuel_gauge.c6
-rw-r--r--drivers/power/supply/bd70528-charger.c140
-rw-r--r--drivers/power/supply/bd99954-charger.c1142
-rw-r--r--drivers/power/supply/bd99954-charger.h1075
-rw-r--r--drivers/power/supply/bq24190_charger.c2
-rw-r--r--drivers/power/supply/bq25890_charger.c200
-rw-r--r--drivers/power/supply/charger-manager.c40
-rw-r--r--drivers/power/supply/cw2015_battery.c749
-rw-r--r--drivers/power/supply/generic-adc-battery.c22
-rw-r--r--drivers/power/supply/lp8788-charger.c18
-rw-r--r--drivers/power/supply/max14656_charger_detector.c5
-rw-r--r--drivers/power/supply/max17040_battery.c2
-rw-r--r--drivers/power/supply/max17042_battery.c8
-rw-r--r--drivers/power/supply/olpc_battery.c4
-rw-r--r--drivers/power/supply/power_supply_core.c8
-rw-r--r--drivers/power/supply/power_supply_hwmon.c64
-rw-r--r--drivers/power/supply/power_supply_sysfs.c479
-rw-r--r--drivers/power/supply/sc27xx_fuel_gauge.c77
-rw-r--r--drivers/power/supply/smb347-charger.c5
30 files changed, 3876 insertions, 490 deletions
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 890380302080..4dfac618b942 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -123,6 +123,13 @@ config POWER_RESET_OCELOT_RESET
help
This driver supports restart for Microsemi Ocelot SoC.
+config POWER_RESET_OXNAS
+ bool "OXNAS SoC restart driver"
+ depends on ARCH_OXNAS
+ default MACH_OX820
+ help
+ Restart support for OXNAS/PLXTECH OX820 SoC.
+
config POWER_RESET_PIIX4_POWEROFF
tristate "Intel PIIX4 power-off driver"
depends on PCI
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index da37f8b851dc..5710ca469517 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
obj-$(CONFIG_POWER_RESET_MT6323) += mt6323-poweroff.o
+obj-$(CONFIG_POWER_RESET_OXNAS) += oxnas-restart.o
obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
diff --git a/drivers/power/reset/ltc2952-poweroff.c b/drivers/power/reset/ltc2952-poweroff.c
index e4a0cc45b3d1..318927938b05 100644
--- a/drivers/power/reset/ltc2952-poweroff.c
+++ b/drivers/power/reset/ltc2952-poweroff.c
@@ -94,7 +94,6 @@ static enum hrtimer_restart ltc2952_poweroff_timer_wde(struct hrtimer *timer)
{
ktime_t now;
int state;
- unsigned long overruns;
struct ltc2952_poweroff *data = to_ltc2952(timer, timer_wde);
if (data->kernel_panic)
@@ -104,7 +103,7 @@ static enum hrtimer_restart ltc2952_poweroff_timer_wde(struct hrtimer *timer)
gpiod_set_value(data->gpio_watchdog, !state);
now = hrtimer_cb_get_time(timer);
- overruns = hrtimer_forward(timer, now, data->wde_interval);
+ hrtimer_forward(timer, now, data->wde_interval);
return HRTIMER_RESTART;
}
diff --git a/drivers/power/reset/oxnas-restart.c b/drivers/power/reset/oxnas-restart.c
new file mode 100644
index 000000000000..13090bec058a
--- /dev/null
+++ b/drivers/power/reset/oxnas-restart.c
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * oxnas SoC reset driver
+ * based on:
+ * Microsemi MIPS SoC reset driver
+ * and ox820_assert_system_reset() written by Ma Hajun <mahaijuns@gmail.com>
+ *
+ * Copyright (c) 2013 Ma Hajun <mahaijuns@gmail.com>
+ * Copyright (c) 2017 Microsemi Corporation
+ * Copyright (c) 2020 Daniel Golle <daniel@makrotopia.org>
+ */
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/notifier.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+/* bit numbers of reset control register */
+#define OX820_SYS_CTRL_RST_SCU 0
+#define OX820_SYS_CTRL_RST_COPRO 1
+#define OX820_SYS_CTRL_RST_ARM0 2
+#define OX820_SYS_CTRL_RST_ARM1 3
+#define OX820_SYS_CTRL_RST_USBHS 4
+#define OX820_SYS_CTRL_RST_USBHSPHYA 5
+#define OX820_SYS_CTRL_RST_MACA 6
+#define OX820_SYS_CTRL_RST_MAC OX820_SYS_CTRL_RST_MACA
+#define OX820_SYS_CTRL_RST_PCIEA 7
+#define OX820_SYS_CTRL_RST_SGDMA 8
+#define OX820_SYS_CTRL_RST_CIPHER 9
+#define OX820_SYS_CTRL_RST_DDR 10
+#define OX820_SYS_CTRL_RST_SATA 11
+#define OX820_SYS_CTRL_RST_SATA_LINK 12
+#define OX820_SYS_CTRL_RST_SATA_PHY 13
+#define OX820_SYS_CTRL_RST_PCIEPHY 14
+#define OX820_SYS_CTRL_RST_STATIC 15
+#define OX820_SYS_CTRL_RST_GPIO 16
+#define OX820_SYS_CTRL_RST_UART1 17
+#define OX820_SYS_CTRL_RST_UART2 18
+#define OX820_SYS_CTRL_RST_MISC 19
+#define OX820_SYS_CTRL_RST_I2S 20
+#define OX820_SYS_CTRL_RST_SD 21
+#define OX820_SYS_CTRL_RST_MACB 22
+#define OX820_SYS_CTRL_RST_PCIEB 23
+#define OX820_SYS_CTRL_RST_VIDEO 24
+#define OX820_SYS_CTRL_RST_DDR_PHY 25
+#define OX820_SYS_CTRL_RST_USBHSPHYB 26
+#define OX820_SYS_CTRL_RST_USBDEV 27
+#define OX820_SYS_CTRL_RST_ARMDBG 29
+#define OX820_SYS_CTRL_RST_PLLA 30
+#define OX820_SYS_CTRL_RST_PLLB 31
+
+/* bit numbers of clock control register */
+#define OX820_SYS_CTRL_CLK_COPRO 0
+#define OX820_SYS_CTRL_CLK_DMA 1
+#define OX820_SYS_CTRL_CLK_CIPHER 2
+#define OX820_SYS_CTRL_CLK_SD 3
+#define OX820_SYS_CTRL_CLK_SATA 4
+#define OX820_SYS_CTRL_CLK_I2S 5
+#define OX820_SYS_CTRL_CLK_USBHS 6
+#define OX820_SYS_CTRL_CLK_MACA 7
+#define OX820_SYS_CTRL_CLK_MAC OX820_SYS_CTRL_CLK_MACA
+#define OX820_SYS_CTRL_CLK_PCIEA 8
+#define OX820_SYS_CTRL_CLK_STATIC 9
+#define OX820_SYS_CTRL_CLK_MACB 10
+#define OX820_SYS_CTRL_CLK_PCIEB 11
+#define OX820_SYS_CTRL_CLK_REF600 12
+#define OX820_SYS_CTRL_CLK_USBDEV 13
+#define OX820_SYS_CTRL_CLK_DDR 14
+#define OX820_SYS_CTRL_CLK_DDRPHY 15
+#define OX820_SYS_CTRL_CLK_DDRCK 16
+
+/* Regmap offsets */
+#define OX820_CLK_SET_REGOFFSET 0x2c
+#define OX820_CLK_CLR_REGOFFSET 0x30
+#define OX820_RST_SET_REGOFFSET 0x34
+#define OX820_RST_CLR_REGOFFSET 0x38
+#define OX820_SECONDARY_SEL_REGOFFSET 0x14
+#define OX820_TERTIARY_SEL_REGOFFSET 0x8c
+#define OX820_QUATERNARY_SEL_REGOFFSET 0x94
+#define OX820_DEBUG_SEL_REGOFFSET 0x9c
+#define OX820_ALTERNATIVE_SEL_REGOFFSET 0xa4
+#define OX820_PULLUP_SEL_REGOFFSET 0xac
+#define OX820_SEC_SECONDARY_SEL_REGOFFSET 0x100014
+#define OX820_SEC_TERTIARY_SEL_REGOFFSET 0x10008c
+#define OX820_SEC_QUATERNARY_SEL_REGOFFSET 0x100094
+#define OX820_SEC_DEBUG_SEL_REGOFFSET 0x10009c
+#define OX820_SEC_ALTERNATIVE_SEL_REGOFFSET 0x1000a4
+#define OX820_SEC_PULLUP_SEL_REGOFFSET 0x1000ac
+
+struct oxnas_restart_context {
+ struct regmap *sys_ctrl;
+ struct notifier_block restart_handler;
+};
+
+static int ox820_restart_handle(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ struct oxnas_restart_context *ctx = container_of(this, struct
+ oxnas_restart_context,
+ restart_handler);
+ u32 value;
+
+ /*
+ * Assert reset to cores as per power on defaults
+ * Don't touch the DDR interface as things will come to an impromptu
+ * stop NB Possibly should be asserting reset for PLLB, but there are
+ * timing concerns here according to the docs
+ */
+ value = BIT(OX820_SYS_CTRL_RST_COPRO) |
+ BIT(OX820_SYS_CTRL_RST_USBHS) |
+ BIT(OX820_SYS_CTRL_RST_USBHSPHYA) |
+ BIT(OX820_SYS_CTRL_RST_MACA) |
+ BIT(OX820_SYS_CTRL_RST_PCIEA) |
+ BIT(OX820_SYS_CTRL_RST_SGDMA) |
+ BIT(OX820_SYS_CTRL_RST_CIPHER) |
+ BIT(OX820_SYS_CTRL_RST_SATA) |
+ BIT(OX820_SYS_CTRL_RST_SATA_LINK) |
+ BIT(OX820_SYS_CTRL_RST_SATA_PHY) |
+ BIT(OX820_SYS_CTRL_RST_PCIEPHY) |
+ BIT(OX820_SYS_CTRL_RST_STATIC) |
+ BIT(OX820_SYS_CTRL_RST_UART1) |
+ BIT(OX820_SYS_CTRL_RST_UART2) |
+ BIT(OX820_SYS_CTRL_RST_MISC) |
+ BIT(OX820_SYS_CTRL_RST_I2S) |
+ BIT(OX820_SYS_CTRL_RST_SD) |
+ BIT(OX820_SYS_CTRL_RST_MACB) |
+ BIT(OX820_SYS_CTRL_RST_PCIEB) |
+ BIT(OX820_SYS_CTRL_RST_VIDEO) |
+ BIT(OX820_SYS_CTRL_RST_USBHSPHYB) |
+ BIT(OX820_SYS_CTRL_RST_USBDEV);
+
+ regmap_write(ctx->sys_ctrl, OX820_RST_SET_REGOFFSET, value);
+
+ /* Release reset to cores as per power on defaults */
+ regmap_write(ctx->sys_ctrl, OX820_RST_CLR_REGOFFSET,
+ BIT(OX820_SYS_CTRL_RST_GPIO));
+
+ /*
+ * Disable clocks to cores as per power-on defaults - must leave DDR
+ * related clocks enabled otherwise we'll stop rather abruptly.
+ */
+ value = BIT(OX820_SYS_CTRL_CLK_COPRO) |
+ BIT(OX820_SYS_CTRL_CLK_DMA) |
+ BIT(OX820_SYS_CTRL_CLK_CIPHER) |
+ BIT(OX820_SYS_CTRL_CLK_SD) |
+ BIT(OX820_SYS_CTRL_CLK_SATA) |
+ BIT(OX820_SYS_CTRL_CLK_I2S) |
+ BIT(OX820_SYS_CTRL_CLK_USBHS) |
+ BIT(OX820_SYS_CTRL_CLK_MAC) |
+ BIT(OX820_SYS_CTRL_CLK_PCIEA) |
+ BIT(OX820_SYS_CTRL_CLK_STATIC) |
+ BIT(OX820_SYS_CTRL_CLK_MACB) |
+ BIT(OX820_SYS_CTRL_CLK_PCIEB) |
+ BIT(OX820_SYS_CTRL_CLK_REF600) |
+ BIT(OX820_SYS_CTRL_CLK_USBDEV);
+
+ regmap_write(ctx->sys_ctrl, OX820_CLK_CLR_REGOFFSET, value);
+
+ /* Enable clocks to cores as per power-on defaults */
+
+ /* Set sys-control pin mux'ing as per power-on defaults */
+ regmap_write(ctx->sys_ctrl, OX820_SECONDARY_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_TERTIARY_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_QUATERNARY_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_DEBUG_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_ALTERNATIVE_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_PULLUP_SEL_REGOFFSET, 0);
+
+ regmap_write(ctx->sys_ctrl, OX820_SEC_SECONDARY_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_SEC_TERTIARY_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_SEC_QUATERNARY_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_SEC_DEBUG_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_SEC_ALTERNATIVE_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_SEC_PULLUP_SEL_REGOFFSET, 0);
+
+ /*
+ * No need to save any state, as the ROM loader can determine whether
+ * reset is due to power cycling or programatic action, just hit the
+ * (self-clearing) CPU reset bit of the block reset register
+ */
+ value =
+ BIT(OX820_SYS_CTRL_RST_SCU) |
+ BIT(OX820_SYS_CTRL_RST_ARM0) |
+ BIT(OX820_SYS_CTRL_RST_ARM1);
+
+ regmap_write(ctx->sys_ctrl, OX820_RST_SET_REGOFFSET, value);
+
+ pr_emerg("Unable to restart system\n");
+ return NOTIFY_DONE;
+}
+
+static int ox820_restart_probe(struct platform_device *pdev)
+{
+ struct oxnas_restart_context *ctx;
+ struct regmap *sys_ctrl;
+ struct device *dev = &pdev->dev;
+ int err = 0;
+
+ sys_ctrl = syscon_node_to_regmap(pdev->dev.of_node);
+ if (IS_ERR(sys_ctrl))
+ return PTR_ERR(sys_ctrl);
+
+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->sys_ctrl = sys_ctrl;
+ ctx->restart_handler.notifier_call = ox820_restart_handle;
+ ctx->restart_handler.priority = 192;
+ err = register_restart_handler(&ctx->restart_handler);
+ if (err)
+ dev_err(dev, "can't register restart notifier (err=%d)\n", err);
+
+ return err;
+}
+
+static const struct of_device_id ox820_restart_of_match[] = {
+ { .compatible = "oxsemi,ox820-sys-ctrl" },
+ {}
+};
+
+static struct platform_driver ox820_restart_driver = {
+ .probe = ox820_restart_probe,
+ .driver = {
+ .name = "ox820-chip-reset",
+ .of_match_table = ox820_restart_of_match,
+ },
+};
+builtin_platform_driver(ox820_restart_driver);
diff --git a/drivers/power/reset/qcom-pon.c b/drivers/power/reset/qcom-pon.c
index 22a743a0bf28..4a688741a88a 100644
--- a/drivers/power/reset/qcom-pon.c
+++ b/drivers/power/reset/qcom-pon.c
@@ -34,7 +34,8 @@ static int pm8916_reboot_mode_write(struct reboot_mode_driver *reboot,
ret = regmap_update_bits(pon->regmap,
pon->baseaddr + PON_SOFT_RB_SPARE,
- 0xfc, magic << pon->reason_shift);
+ GENMASK(7, pon->reason_shift),
+ magic << pon->reason_shift);
if (ret < 0)
dev_err(pon->dev, "update reboot mode bits failed\n");
diff --git a/drivers/power/reset/syscon-reboot.c b/drivers/power/reset/syscon-reboot.c
index 62fbba0df971..510e363381ca 100644
--- a/drivers/power/reset/syscon-reboot.c
+++ b/drivers/power/reset/syscon-reboot.c
@@ -51,8 +51,11 @@ static int syscon_reboot_probe(struct platform_device *pdev)
return -ENOMEM;
ctx->map = syscon_regmap_lookup_by_phandle(dev->of_node, "regmap");
- if (IS_ERR(ctx->map))
- return PTR_ERR(ctx->map);
+ if (IS_ERR(ctx->map)) {
+ ctx->map = syscon_node_to_regmap(dev->parent->of_node);
+ if (IS_ERR(ctx->map))
+ return PTR_ERR(ctx->map);
+ }
if (of_property_read_u32(pdev->dev.of_node, "offset", &ctx->offset))
return -EINVAL;
diff --git a/drivers/power/supply/88pm860x_battery.c b/drivers/power/supply/88pm860x_battery.c
index 5ca047b3f58f..1308f3a185f3 100644
--- a/drivers/power/supply/88pm860x_battery.c
+++ b/drivers/power/supply/88pm860x_battery.c
@@ -919,16 +919,12 @@ static int pm860x_battery_probe(struct platform_device *pdev)
return -ENOMEM;
info->irq_cc = platform_get_irq(pdev, 0);
- if (info->irq_cc <= 0) {
- dev_err(&pdev->dev, "No IRQ resource!\n");
+ if (info->irq_cc <= 0)
return -EINVAL;
- }
info->irq_batt = platform_get_irq(pdev, 1);
- if (info->irq_batt <= 0) {
- dev_err(&pdev->dev, "No IRQ resource!\n");
+ if (info->irq_batt <= 0)
return -EINVAL;
- }
info->chip = chip;
info->i2c =
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index a46643f5e2fb..44d3c8512fb8 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -116,6 +116,17 @@ config BATTERY_CPCAP
Say Y here to enable support for battery on Motorola
phones and tablets such as droid 4.
+config BATTERY_CW2015
+ tristate "CW2015 Battery driver"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Say Y here to enable support for the cellwise cw2015
+ battery fuel gauge (used in the Pinebook Pro & others)
+
+ This driver can also be built as a module. If so, the module will be
+ called cw2015_battery.
+
config BATTERY_DS2760
tristate "DS2760 battery driver (HP iPAQ & others)"
depends on W1
@@ -415,7 +426,7 @@ config CHARGER_PCF50633
tristate "NXP PCF50633 MBC"
depends on MFD_PCF50633
help
- Say Y to include support for NXP PCF50633 Main Battery Charger.
+ Say Y to include support for NXP PCF50633 Main Battery Charger.
config BATTERY_RX51
tristate "Nokia RX-51 (N900) battery driver"
@@ -587,7 +598,7 @@ config CHARGER_BQ24257
tristate "TI BQ24250/24251/24257 battery charger driver"
depends on I2C
depends on GPIOLIB || COMPILE_TEST
- depends on REGMAP_I2C
+ select REGMAP_I2C
help
Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery
chargers.
@@ -619,15 +630,15 @@ config CHARGER_TPS65090
tristate "TPS65090 battery charger driver"
depends on MFD_TPS65090
help
- Say Y here to enable support for battery charging with TPS65090
- PMIC chips.
+ Say Y here to enable support for battery charging with TPS65090
+ PMIC chips.
config CHARGER_TPS65217
tristate "TPS65217 battery charger driver"
depends on MFD_TPS65217
help
- Say Y here to enable support for battery charging with TPS65217
- PMIC chips.
+ Say Y here to enable support for battery charging with TPS65217
+ PMIC chips.
config BATTERY_GAUGE_LTC2941
tristate "LTC2941/LTC2943 Battery Gauge Driver"
@@ -670,7 +681,6 @@ config CHARGER_RT9455
config CHARGER_CROS_USBPD
tristate "ChromeOS EC based USBPD charger"
depends on CROS_USBPD_NOTIFY
- default n
help
Say Y here to enable ChromeOS EC based USBPD charger
driver. This driver gets various bits of information about
@@ -681,16 +691,16 @@ config CHARGER_SC2731
tristate "Spreadtrum SC2731 charger driver"
depends on MFD_SC27XX_PMIC || COMPILE_TEST
help
- Say Y here to enable support for battery charging with SC2731
- PMIC chips.
+ Say Y here to enable support for battery charging with SC2731
+ PMIC chips.
config FUEL_GAUGE_SC27XX
tristate "Spreadtrum SC27XX fuel gauge driver"
depends on MFD_SC27XX_PMIC || COMPILE_TEST
depends on IIO
help
- Say Y here to enable support for fuel gauge with SC27XX
- PMIC chips.
+ Say Y here to enable support for fuel gauge with SC27XX
+ PMIC chips.
config CHARGER_UCS1002
tristate "Microchip UCS1002 USB Port Power Controller"
@@ -705,11 +715,20 @@ config CHARGER_UCS1002
config CHARGER_BD70528
tristate "ROHM bd70528 charger driver"
depends on MFD_ROHM_BD70528
- default n
+ select LINEAR_RANGES
+ help
+ Say Y here to enable support for getting battery status
+ information and altering charger configurations from charger
+ block of the ROHM BD70528 Power Management IC.
+
+config CHARGER_BD99954
+ tristate "ROHM bd99954 charger driver"
+ depends on I2C
+ select LINEAR_RANGES
help
- Say Y here to enable support for getting battery status
- information and altering charger configurations from charger
- block of the ROHM BD70528 Power Management IC.
+ Say Y here to enable support for getting battery and charger
+ information and altering charger configurations from the ROHM
+ BD99954 charger IC.
config CHARGER_WILCO
tristate "Wilco EC based charger for ChromeOS"
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
index 41cb64f09e49..b9644663e435 100644
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_BATTERY_ACT8945A) += act8945a_charger.o
obj-$(CONFIG_BATTERY_AXP20X) += axp20x_battery.o
obj-$(CONFIG_CHARGER_AXP20X) += axp20x_ac_power.o
obj-$(CONFIG_BATTERY_CPCAP) += cpcap-battery.o
+obj-$(CONFIG_BATTERY_CW2015) += cw2015_battery.o
obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o
obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o
@@ -92,4 +93,5 @@ obj-$(CONFIG_CHARGER_SC2731) += sc2731_charger.o
obj-$(CONFIG_FUEL_GAUGE_SC27XX) += sc27xx_fuel_gauge.o
obj-$(CONFIG_CHARGER_UCS1002) += ucs1002_power.o
obj-$(CONFIG_CHARGER_BD70528) += bd70528-charger.o
+obj-$(CONFIG_CHARGER_BD99954) += bd99954-charger.o
obj-$(CONFIG_CHARGER_WILCO) += wilco-charger.o
diff --git a/drivers/power/supply/ab8500_fg.c b/drivers/power/supply/ab8500_fg.c
index b96f90a82ecf..751c4f6c7487 100644
--- a/drivers/power/supply/ab8500_fg.c
+++ b/drivers/power/supply/ab8500_fg.c
@@ -2399,7 +2399,7 @@ static void ab8500_fg_reinit_work(struct work_struct *work)
struct ab8500_fg *di = container_of(work, struct ab8500_fg,
fg_reinit_work.work);
- if (di->flags.calibrate == false) {
+ if (!di->flags.calibrate) {
dev_dbg(di->dev, "Resetting FG state machine to init.\n");
ab8500_fg_clear_cap_samples(di);
ab8500_fg_calc_cap_discharge_voltage(di, true);
diff --git a/drivers/power/supply/axp288_charger.c b/drivers/power/supply/axp288_charger.c
index cf4c67b2d235..9d981b76c1e7 100644
--- a/drivers/power/supply/axp288_charger.c
+++ b/drivers/power/supply/axp288_charger.c
@@ -880,10 +880,9 @@ static int axp288_charger_probe(struct platform_device *pdev)
/* Register charger interrupts */
for (i = 0; i < CHRG_INTR_END; i++) {
pirq = platform_get_irq(info->pdev, i);
- if (pirq < 0) {
- dev_err(&pdev->dev, "Failed to get IRQ: %d\n", pirq);
+ if (pirq < 0)
return pirq;
- }
+
info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq);
if (info->irq[i] < 0) {
dev_warn(&info->pdev->dev,
diff --git a/drivers/power/supply/axp288_fuel_gauge.c b/drivers/power/supply/axp288_fuel_gauge.c
index f40fa0e63b6e..148eb8105803 100644
--- a/drivers/power/supply/axp288_fuel_gauge.c
+++ b/drivers/power/supply/axp288_fuel_gauge.c
@@ -718,6 +718,12 @@ static const struct dmi_system_id axp288_fuel_gauge_blacklist[] = {
},
},
{
+ /* Meegopad T02 */
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "MEEGOPAD T02"),
+ },
+ },
+ {
/* Meegopad T08 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Default string"),
diff --git a/drivers/power/supply/bd70528-charger.c b/drivers/power/supply/bd70528-charger.c
index b8e1ec106627..7c1f0b99c71b 100644
--- a/drivers/power/supply/bd70528-charger.c
+++ b/drivers/power/supply/bd70528-charger.c
@@ -72,6 +72,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
+#include <linux/linear_range.h>
#define CHG_STAT_SUSPEND 0x0
#define CHG_STAT_TRICKLE 0x1
@@ -335,38 +336,37 @@ static int bd70528_get_present(struct bd70528_psy *bdpsy, int *val)
return 0;
}
-struct linear_range {
- int min;
- int step;
- int vals;
- int low_sel;
-};
-
static const struct linear_range current_limit_ranges[] = {
{
.min = 5,
.step = 1,
- .vals = 36,
- .low_sel = 0,
+ .min_sel = 0,
+ .max_sel = 0x22,
},
{
.min = 40,
.step = 5,
- .vals = 5,
- .low_sel = 0x23,
+ .min_sel = 0x23,
+ .max_sel = 0x26,
},
{
.min = 60,
.step = 20,
- .vals = 8,
- .low_sel = 0x27,
+ .min_sel = 0x27,
+ .max_sel = 0x2d,
},
{
.min = 200,
.step = 50,
- .vals = 7,
- .low_sel = 0x2e,
- }
+ .min_sel = 0x2e,
+ .max_sel = 0x34,
+ },
+ {
+ .min = 500,
+ .step = 0,
+ .min_sel = 0x35,
+ .max_sel = 0x3f,
+ },
};
/*
@@ -378,14 +378,14 @@ static const struct linear_range warm_charge_curr[] = {
{
.min = 10,
.step = 10,
- .vals = 20,
- .low_sel = 0,
+ .min_sel = 0,
+ .max_sel = 0x12,
},
{
.min = 200,
.step = 25,
- .vals = 13,
- .low_sel = 0x13,
+ .min_sel = 0x13,
+ .max_sel = 0x1f,
},
};
@@ -398,56 +398,6 @@ static const struct linear_range warm_charge_curr[] = {
#define MAX_WARM_CHG_CURR_SEL 0x1f
#define MIN_CHG_CURR_SEL 0x0
-static int find_value_for_selector_low(const struct linear_range *r,
- int selectors, unsigned int sel,
- unsigned int *val)
-{
- int i;
-
- for (i = 0; i < selectors; i++) {
- if (r[i].low_sel <= sel && r[i].low_sel + r[i].vals >= sel) {
- *val = r[i].min + (sel - r[i].low_sel) * r[i].step;
- return 0;
- }
- }
- return -EINVAL;
-}
-
-/*
- * For BD70528 voltage/current limits we happily accept any value which
- * belongs the range. We could check if value matching the selector is
- * desired by computing the range min + (sel - sel_low) * range step - but
- * I guess it is enough if we use voltage/current which is closest (below)
- * the requested?
- */
-static int find_selector_for_value_low(const struct linear_range *r,
- int selectors, unsigned int val,
- unsigned int *sel, bool *found)
-{
- int i;
- int ret = -EINVAL;
-
- *found = false;
- for (i = 0; i < selectors; i++) {
- if (r[i].min <= val) {
- if (r[i].min + r[i].step * r[i].vals >= val) {
- *found = true;
- *sel = r[i].low_sel + (val - r[i].min) /
- r[i].step;
- ret = 0;
- break;
- }
- /*
- * If the range max is smaller than requested
- * we can set the max supported value from range
- */
- *sel = r[i].low_sel + r[i].vals;
- ret = 0;
- }
- }
- return ret;
-}
-
static int get_charge_current(struct bd70528_psy *bdpsy, int *ma)
{
unsigned int sel;
@@ -463,9 +413,9 @@ static int get_charge_current(struct bd70528_psy *bdpsy, int *ma)
sel &= BD70528_MASK_CHG_CHG_CURR;
- ret = find_value_for_selector_low(&warm_charge_curr[0],
- ARRAY_SIZE(warm_charge_curr), sel,
- ma);
+ ret = linear_range_get_value_array(&warm_charge_curr[0],
+ ARRAY_SIZE(warm_charge_curr),
+ sel, ma);
if (ret) {
dev_err(bdpsy->dev,
"Unknown charge current value 0x%x\n",
@@ -491,10 +441,9 @@ static int get_current_limit(struct bd70528_psy *bdpsy, int *ma)
sel &= BD70528_MASK_CHG_DCIN_ILIM;
- ret = find_value_for_selector_low(&current_limit_ranges[0],
- ARRAY_SIZE(current_limit_ranges), sel,
- ma);
-
+ ret = linear_range_get_value_array(&current_limit_ranges[0],
+ ARRAY_SIZE(current_limit_ranges),
+ sel, ma);
if (ret) {
/* Unspecified values mean 500 mA */
*ma = 500;
@@ -588,15 +537,28 @@ static int set_charge_current(struct bd70528_psy *bdpsy, int ma)
goto set;
}
- ret = find_selector_for_value_low(&warm_charge_curr[0],
- ARRAY_SIZE(warm_charge_curr), ma,
- &reg, &found);
+/*
+ * For BD70528 voltage/current limits we happily accept any value which
+ * belongs the range. We could check if value matching the selector is
+ * desired by computing the range min + (sel - sel_low) * range step - but
+ * I guess it is enough if we use voltage/current which is closest (below)
+ * the requested?
+ */
+
+ ret = linear_range_get_selector_low_array(warm_charge_curr,
+ ARRAY_SIZE(warm_charge_curr),
+ ma, &reg, &found);
if (ret) {
+ dev_err(bdpsy->dev,
+ "Unsupported charge current %u mA\n", ma);
reg = MIN_CHG_CURR_SEL;
goto set;
}
if (!found) {
- /* There was a gap in supported values and we hit it */
+ /*
+ * There was a gap in supported values and we hit it.
+ * Yet a smaller value was found so we use it.
+ */
dev_warn(bdpsy->dev,
"Unsupported charge current %u mA\n", ma);
}
@@ -648,17 +610,21 @@ static int set_current_limit(struct bd70528_psy *bdpsy, int ma)
goto set;
}
- ret = find_selector_for_value_low(&current_limit_ranges[0],
- ARRAY_SIZE(current_limit_ranges), ma,
- &reg, &found);
+ ret = linear_range_get_selector_low_array(current_limit_ranges,
+ ARRAY_SIZE(current_limit_ranges),
+ ma, &reg, &found);
if (ret) {
+ dev_err(bdpsy->dev, "Unsupported current limit %umA\n", ma);
reg = MIN_CURR_LIMIT_SEL;
goto set;
}
if (!found) {
- /* There was a gap in supported values and we hit it ?*/
- dev_warn(bdpsy->dev, "Unsupported current limit %umA\n",
- ma);
+ /*
+ * There was a gap in supported values and we hit it.
+ * We found a smaller value from ranges and use it.
+ * Warn user though.
+ */
+ dev_warn(bdpsy->dev, "Unsupported current limit %umA\n", ma);
}
set:
diff --git a/drivers/power/supply/bd99954-charger.c b/drivers/power/supply/bd99954-charger.c
new file mode 100644
index 000000000000..3da39c7293e3
--- /dev/null
+++ b/drivers/power/supply/bd99954-charger.c
@@ -0,0 +1,1142 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ROHM BD99954 charger driver
+ *
+ * Copyright (C) 2020 Rohm Semiconductors
+ * Originally written by:
+ * Mikko Mutanen <mikko.mutanen@fi.rohmeurope.com>
+ * Markus Laine <markus.laine@fi.rohmeurope.com>
+ * Bugs added by:
+ * Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+ */
+
+/*
+ * The battery charging profile of BD99954.
+ *
+ * Curve (1) represents charging current.
+ * Curve (2) represents battery voltage.
+ *
+ * The BD99954 data sheet divides charging to three phases.
+ * a) Trickle-charge with constant current (8).
+ * b) pre-charge with constant current (6)
+ * c) fast-charge, first with constant current (5) phase. After
+ * the battery voltage has reached target level (4) we have constant
+ * voltage phase until charging current has dropped to termination
+ * level (7)
+ *
+ * V ^ ^ I
+ * . .
+ * . .
+ *(4)` `.` ` ` ` ` ` ` ` ` ` ` ` ` ` ----------------------------.
+ * . :/ .
+ * . o----+/:/ ` ` ` ` ` ` ` ` ` ` ` ` `.` ` (5)
+ * . + :: + .
+ * . + /- -- .
+ * . +`/- + .
+ * . o/- -: .
+ * . .s. +` .
+ * . .--+ `/ .
+ * . ..`` + .: .
+ * . -` + -- .
+ * . (2) ...`` + :- .
+ * . ...`` + -: .
+ *(3)` `.`."" ` ` ` `+-------- ` ` ` ` ` ` `.:` ` ` ` ` ` ` ` ` .` ` (6)
+ * . + `:. .
+ * . + -: .
+ * . + -:. .
+ * . + .--. .
+ * . (1) + `.+` ` ` `.` ` (7)
+ * -..............` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` + ` ` ` .` ` (8)
+ * . + -
+ * -------------------------------------------------+++++++++-->
+ * | trickle | pre | fast |
+ *
+ * Details of DT properties for different limits can be found from BD99954
+ * device tree binding documentation.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/linear_range.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/power_supply.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+#include "bd99954-charger.h"
+
+struct battery_data {
+ u16 precharge_current; /* Trickle-charge Current */
+ u16 fc_reg_voltage; /* Fast Charging Regulation Voltage */
+ u16 voltage_min;
+ u16 voltage_max;
+};
+
+/* Initial field values, converted to initial register values */
+struct bd9995x_init_data {
+ u16 vsysreg_set; /* VSYS Regulation Setting */
+ u16 ibus_lim_set; /* VBUS input current limitation */
+ u16 icc_lim_set; /* VCC/VACP Input Current Limit Setting */
+ u16 itrich_set; /* Trickle-charge Current Setting */
+ u16 iprech_set; /* Pre-Charge Current Setting */
+ u16 ichg_set; /* Fast-Charge constant current */
+ u16 vfastchg_reg_set1; /* Fast Charging Regulation Voltage */
+ u16 vprechg_th_set; /* Pre-charge Voltage Threshold Setting */
+ u16 vrechg_set; /* Re-charge Battery Voltage Setting */
+ u16 vbatovp_set; /* Battery Over Voltage Threshold Setting */
+ u16 iterm_set; /* Charging termination current */
+};
+
+struct bd9995x_state {
+ u8 online;
+ u16 chgstm_status;
+ u16 vbat_vsys_status;
+ u16 vbus_vcc_status;
+};
+
+struct bd9995x_device {
+ struct i2c_client *client;
+ struct device *dev;
+ struct power_supply *charger;
+
+ struct regmap *rmap;
+ struct regmap_field *rmap_fields[F_MAX_FIELDS];
+
+ int chip_id;
+ int chip_rev;
+ struct bd9995x_init_data init_data;
+ struct bd9995x_state state;
+
+ struct mutex lock; /* Protect state data */
+};
+
+static const struct regmap_range bd9995x_readonly_reg_ranges[] = {
+ regmap_reg_range(CHGSTM_STATUS, SEL_ILIM_VAL),
+ regmap_reg_range(IOUT_DACIN_VAL, IOUT_DACIN_VAL),
+ regmap_reg_range(VCC_UCD_STATUS, VCC_IDD_STATUS),
+ regmap_reg_range(VBUS_UCD_STATUS, VBUS_IDD_STATUS),
+ regmap_reg_range(CHIP_ID, CHIP_REV),
+ regmap_reg_range(SYSTEM_STATUS, SYSTEM_STATUS),
+ regmap_reg_range(IBATP_VAL, VBAT_AVE_VAL),
+ regmap_reg_range(VTH_VAL, EXTIADP_AVE_VAL),
+};
+
+static const struct regmap_access_table bd9995x_writeable_regs = {
+ .no_ranges = bd9995x_readonly_reg_ranges,
+ .n_no_ranges = ARRAY_SIZE(bd9995x_readonly_reg_ranges),
+};
+
+static const struct regmap_range bd9995x_volatile_reg_ranges[] = {
+ regmap_reg_range(CHGSTM_STATUS, WDT_STATUS),
+ regmap_reg_range(VCC_UCD_STATUS, VCC_IDD_STATUS),
+ regmap_reg_range(VBUS_UCD_STATUS, VBUS_IDD_STATUS),
+ regmap_reg_range(INT0_STATUS, INT7_STATUS),
+ regmap_reg_range(SYSTEM_STATUS, SYSTEM_CTRL_SET),
+ regmap_reg_range(IBATP_VAL, EXTIADP_AVE_VAL), /* Measurement regs */
+};
+
+static const struct regmap_access_table bd9995x_volatile_regs = {
+ .yes_ranges = bd9995x_volatile_reg_ranges,
+ .n_yes_ranges = ARRAY_SIZE(bd9995x_volatile_reg_ranges),
+};
+
+static const struct regmap_range_cfg regmap_range_cfg[] = {
+ {
+ .selector_reg = MAP_SET,
+ .selector_mask = 0xFFFF,
+ .selector_shift = 0,
+ .window_start = 0,
+ .window_len = 0x100,
+ .range_min = 0 * 0x100,
+ .range_max = 3 * 0x100,
+ },
+};
+
+static const struct regmap_config bd9995x_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .reg_stride = 1,
+
+ .max_register = 3 * 0x100,
+ .cache_type = REGCACHE_RBTREE,
+
+ .ranges = regmap_range_cfg,
+ .num_ranges = ARRAY_SIZE(regmap_range_cfg),
+ .val_format_endian = REGMAP_ENDIAN_LITTLE,
+ .wr_table = &bd9995x_writeable_regs,
+ .volatile_table = &bd9995x_volatile_regs,
+};
+
+enum bd9995x_chrg_fault {
+ CHRG_FAULT_NORMAL,
+ CHRG_FAULT_INPUT,
+ CHRG_FAULT_THERMAL_SHUTDOWN,
+ CHRG_FAULT_TIMER_EXPIRED,
+};
+
+static int bd9995x_get_prop_batt_health(struct bd9995x_device *bd)
+{
+ int ret, tmp;
+
+ ret = regmap_field_read(bd->rmap_fields[F_BATTEMP], &tmp);
+ if (ret)
+ return POWER_SUPPLY_HEALTH_UNKNOWN;
+
+ /* TODO: Check these against datasheet page 34 */
+
+ switch (tmp) {
+ case ROOM:
+ return POWER_SUPPLY_HEALTH_GOOD;
+ case HOT1:
+ case HOT2:
+ case HOT3:
+ return POWER_SUPPLY_HEALTH_OVERHEAT;
+ case COLD1:
+ case COLD2:
+ return POWER_SUPPLY_HEALTH_COLD;
+ case TEMP_DIS:
+ case BATT_OPEN:
+ default:
+ return POWER_SUPPLY_HEALTH_UNKNOWN;
+ }
+}
+
+static int bd9995x_get_prop_charge_type(struct bd9995x_device *bd)
+{
+ int ret, tmp;
+
+ ret = regmap_field_read(bd->rmap_fields[F_CHGSTM_STATE], &tmp);
+ if (ret)
+ return POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+
+ switch (tmp) {
+ case CHGSTM_TRICKLE_CHARGE:
+ case CHGSTM_PRE_CHARGE:
+ return POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ case CHGSTM_FAST_CHARGE:
+ return POWER_SUPPLY_CHARGE_TYPE_FAST;
+ case CHGSTM_TOP_OFF:
+ case CHGSTM_DONE:
+ case CHGSTM_SUSPEND:
+ return POWER_SUPPLY_CHARGE_TYPE_NONE;
+ default: /* Rest of the states are error related, no charging */
+ return POWER_SUPPLY_CHARGE_TYPE_NONE;
+ }
+}
+
+static bool bd9995x_get_prop_batt_present(struct bd9995x_device *bd)
+{
+ int ret, tmp;
+
+ ret = regmap_field_read(bd->rmap_fields[F_BATTEMP], &tmp);
+ if (ret)
+ return false;
+
+ return tmp != BATT_OPEN;
+}
+
+static int bd9995x_get_prop_batt_voltage(struct bd9995x_device *bd)
+{
+ int ret, tmp;
+
+ ret = regmap_field_read(bd->rmap_fields[F_VBAT_VAL], &tmp);
+ if (ret)
+ return 0;
+
+ tmp = min(tmp, 19200);
+
+ return tmp * 1000;
+}
+
+static int bd9995x_get_prop_batt_current(struct bd9995x_device *bd)
+{
+ int ret, tmp;
+
+ ret = regmap_field_read(bd->rmap_fields[F_IBATP_VAL], &tmp);
+ if (ret)
+ return 0;
+
+ return tmp * 1000;
+}
+
+#define DEFAULT_BATTERY_TEMPERATURE 250
+
+static int bd9995x_get_prop_batt_temp(struct bd9995x_device *bd)
+{
+ int ret, tmp;
+
+ ret = regmap_field_read(bd->rmap_fields[F_THERM_VAL], &tmp);
+ if (ret)
+ return DEFAULT_BATTERY_TEMPERATURE;
+
+ return (200 - tmp) * 10;
+}
+
+static int bd9995x_power_supply_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret, tmp;
+ struct bd9995x_device *bd = power_supply_get_drvdata(psy);
+ struct bd9995x_state state;
+
+ mutex_lock(&bd->lock);
+ state = bd->state;
+ mutex_unlock(&bd->lock);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ switch (state.chgstm_status) {
+ case CHGSTM_TRICKLE_CHARGE:
+ case CHGSTM_PRE_CHARGE:
+ case CHGSTM_FAST_CHARGE:
+ case CHGSTM_TOP_OFF:
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+
+ case CHGSTM_DONE:
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ break;
+
+ case CHGSTM_SUSPEND:
+ case CHGSTM_TEMPERATURE_ERROR_1:
+ case CHGSTM_TEMPERATURE_ERROR_2:
+ case CHGSTM_TEMPERATURE_ERROR_3:
+ case CHGSTM_TEMPERATURE_ERROR_4:
+ case CHGSTM_TEMPERATURE_ERROR_5:
+ case CHGSTM_TEMPERATURE_ERROR_6:
+ case CHGSTM_TEMPERATURE_ERROR_7:
+ case CHGSTM_THERMAL_SHUT_DOWN_1:
+ case CHGSTM_THERMAL_SHUT_DOWN_2:
+ case CHGSTM_THERMAL_SHUT_DOWN_3:
+ case CHGSTM_THERMAL_SHUT_DOWN_4:
+ case CHGSTM_THERMAL_SHUT_DOWN_5:
+ case CHGSTM_THERMAL_SHUT_DOWN_6:
+ case CHGSTM_THERMAL_SHUT_DOWN_7:
+ case CHGSTM_BATTERY_ERROR:
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+
+ default:
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+ break;
+ }
+ break;
+
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = BD9995X_MANUFACTURER;
+ break;
+
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = state.online;
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ ret = regmap_field_read(bd->rmap_fields[F_IBATP_VAL], &tmp);
+ if (ret)
+ return ret;
+ val->intval = tmp * 1000;
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_AVG:
+ ret = regmap_field_read(bd->rmap_fields[F_IBATP_AVE_VAL], &tmp);
+ if (ret)
+ return ret;
+ val->intval = tmp * 1000;
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+ /*
+ * Currently the DT uses this property to give the
+ * target current for fast-charging constant current phase.
+ * I think it is correct in a sense.
+ *
+ * Yet, this prop we read and return here is the programmed
+ * safety limit for combined input currents. This feels
+ * also correct in a sense.
+ *
+ * However, this results a mismatch to DT value and value
+ * read from sysfs.
+ */
+ ret = regmap_field_read(bd->rmap_fields[F_SEL_ILIM_VAL], &tmp);
+ if (ret)
+ return ret;
+ val->intval = tmp * 1000;
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ if (!state.online) {
+ val->intval = 0;
+ break;
+ }
+
+ ret = regmap_field_read(bd->rmap_fields[F_VFASTCHG_REG_SET1],
+ &tmp);
+ if (ret)
+ return ret;
+
+ /*
+ * The actual range : 2560 to 19200 mV. No matter what the
+ * register says
+ */
+ val->intval = clamp_val(tmp << 4, 2560, 19200);
+ val->intval *= 1000;
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+ ret = regmap_field_read(bd->rmap_fields[F_ITERM_SET], &tmp);
+ if (ret)
+ return ret;
+ /* Start step is 64 mA */
+ val->intval = tmp << 6;
+ /* Maximum is 1024 mA - no matter what register says */
+ val->intval = min(val->intval, 1024);
+ val->intval *= 1000;
+ break;
+
+ /* Battery properties which we access through charger */
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = bd9995x_get_prop_batt_present(bd);
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = bd9995x_get_prop_batt_voltage(bd);
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ val->intval = bd9995x_get_prop_batt_current(bd);
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ val->intval = bd9995x_get_prop_charge_type(bd);
+ break;
+
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = bd9995x_get_prop_batt_health(bd);
+ break;
+
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = bd9995x_get_prop_batt_temp(bd);
+ break;
+
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = "bd99954";
+ break;
+
+ default:
+ return -EINVAL;
+
+ }
+
+ return 0;
+}
+
+static int bd9995x_get_chip_state(struct bd9995x_device *bd,
+ struct bd9995x_state *state)
+{
+ int i, ret, tmp;
+ struct {
+ struct regmap_field *id;
+ u16 *data;
+ } state_fields[] = {
+ {
+ bd->rmap_fields[F_CHGSTM_STATE], &state->chgstm_status,
+ }, {
+ bd->rmap_fields[F_VBAT_VSYS_STATUS],
+ &state->vbat_vsys_status,
+ }, {
+ bd->rmap_fields[F_VBUS_VCC_STATUS],
+ &state->vbus_vcc_status,
+ },
+ };
+
+
+ for (i = 0; i < ARRAY_SIZE(state_fields); i++) {
+ ret = regmap_field_read(state_fields[i].id, &tmp);
+ if (ret)
+ return ret;
+
+ *state_fields[i].data = tmp;
+ }
+
+ if (state->vbus_vcc_status & STATUS_VCC_DET ||
+ state->vbus_vcc_status & STATUS_VBUS_DET)
+ state->online = 1;
+ else
+ state->online = 0;
+
+ return 0;
+}
+
+static irqreturn_t bd9995x_irq_handler_thread(int irq, void *private)
+{
+ struct bd9995x_device *bd = private;
+ int ret, status, mask, i;
+ unsigned long tmp;
+ struct bd9995x_state state;
+
+ /*
+ * The bd9995x does not seem to generate big amount of interrupts.
+ * The logic regarding which interrupts can cause relevant
+ * status changes seem to be pretty complex.
+ *
+ * So lets implement really simple and hopefully bullet-proof handler:
+ * It does not really matter which IRQ we handle, we just go and
+ * re-read all interesting statuses + give the framework a nudge.
+ *
+ * Other option would be building a _complex_ and error prone logic
+ * trying to decide what could have been changed (resulting this IRQ
+ * we are now handling). During the normal operation the BD99954 does
+ * not seem to be generating much of interrupts so benefit from such
+ * logic would probably be minimal.
+ */
+
+ ret = regmap_read(bd->rmap, INT0_STATUS, &status);
+ if (ret) {
+ dev_err(bd->dev, "Failed to read IRQ status\n");
+ return IRQ_NONE;
+ }
+
+ ret = regmap_field_read(bd->rmap_fields[F_INT0_SET], &mask);
+ if (ret) {
+ dev_err(bd->dev, "Failed to read IRQ mask\n");
+ return IRQ_NONE;
+ }
+
+ /* Handle only IRQs that are not masked */
+ status &= mask;
+ tmp = status;
+
+ /* Lowest bit does not represent any sub-registers */
+ tmp >>= 1;
+
+ /*
+ * Mask and ack IRQs we will handle (+ the idiot bit)
+ */
+ ret = regmap_field_write(bd->rmap_fields[F_INT0_SET], 0);
+ if (ret) {
+ dev_err(bd->dev, "Failed to mask F_INT0\n");
+ return IRQ_NONE;
+ }
+
+ ret = regmap_write(bd->rmap, INT0_STATUS, status);
+ if (ret) {
+ dev_err(bd->dev, "Failed to ack F_INT0\n");
+ goto err_umask;
+ }
+
+ for_each_set_bit(i, &tmp, 7) {
+ int sub_status, sub_mask;
+ int sub_status_reg[] = {
+ INT1_STATUS, INT2_STATUS, INT3_STATUS, INT4_STATUS,
+ INT5_STATUS, INT6_STATUS, INT7_STATUS,
+ };
+ struct regmap_field *sub_mask_f[] = {
+ bd->rmap_fields[F_INT1_SET],
+ bd->rmap_fields[F_INT2_SET],
+ bd->rmap_fields[F_INT3_SET],
+ bd->rmap_fields[F_INT4_SET],
+ bd->rmap_fields[F_INT5_SET],
+ bd->rmap_fields[F_INT6_SET],
+ bd->rmap_fields[F_INT7_SET],
+ };
+
+ /* Clear sub IRQs */
+ ret = regmap_read(bd->rmap, sub_status_reg[i], &sub_status);
+ if (ret) {
+ dev_err(bd->dev, "Failed to read IRQ sub-status\n");
+ goto err_umask;
+ }
+
+ ret = regmap_field_read(sub_mask_f[i], &sub_mask);
+ if (ret) {
+ dev_err(bd->dev, "Failed to read IRQ sub-mask\n");
+ goto err_umask;
+ }
+
+ /* Ack active sub-statuses */
+ sub_status &= sub_mask;
+
+ ret = regmap_write(bd->rmap, sub_status_reg[i], sub_status);
+ if (ret) {
+ dev_err(bd->dev, "Failed to ack sub-IRQ\n");
+ goto err_umask;
+ }
+ }
+
+ ret = regmap_field_write(bd->rmap_fields[F_INT0_SET], mask);
+ if (ret)
+ /* May as well retry once */
+ goto err_umask;
+
+ /* Read whole chip state */
+ ret = bd9995x_get_chip_state(bd, &state);
+ if (ret < 0) {
+ dev_err(bd->dev, "Failed to read chip state\n");
+ } else {
+ mutex_lock(&bd->lock);
+ bd->state = state;
+ mutex_unlock(&bd->lock);
+
+ power_supply_changed(bd->charger);
+ }
+
+ return IRQ_HANDLED;
+
+err_umask:
+ ret = regmap_field_write(bd->rmap_fields[F_INT0_SET], mask);
+ if (ret)
+ dev_err(bd->dev,
+ "Failed to un-mask F_INT0 - IRQ permanently disabled\n");
+
+ return IRQ_NONE;
+}
+
+static int __bd9995x_chip_reset(struct bd9995x_device *bd)
+{
+ int ret, state;
+ int rst_check_counter = 10;
+ u16 tmp = ALLRST | OTPLD;
+
+ ret = regmap_raw_write(bd->rmap, SYSTEM_CTRL_SET, &tmp, 2);
+ if (ret < 0)
+ return ret;
+
+ do {
+ ret = regmap_field_read(bd->rmap_fields[F_OTPLD_STATE], &state);
+ if (ret)
+ return ret;
+
+ msleep(10);
+ } while (state == 0 && --rst_check_counter);
+
+ if (!rst_check_counter) {
+ dev_err(bd->dev, "chip reset not completed\n");
+ return -ETIMEDOUT;
+ }
+
+ tmp = 0;
+ ret = regmap_raw_write(bd->rmap, SYSTEM_CTRL_SET, &tmp, 2);
+
+ return ret;
+}
+
+static int bd9995x_hw_init(struct bd9995x_device *bd)
+{
+ int ret;
+ int i;
+ struct bd9995x_state state;
+ struct bd9995x_init_data *id = &bd->init_data;
+
+ const struct {
+ enum bd9995x_fields id;
+ u16 value;
+ } init_data[] = {
+ /* Enable the charging trigger after SDP charger attached */
+ {F_SDP_CHG_TRIG_EN, 1},
+ /* Enable charging trigger after SDP charger attached */
+ {F_SDP_CHG_TRIG, 1},
+ /* Disable charging trigger by BC1.2 detection */
+ {F_VBUS_BC_DISEN, 1},
+ /* Disable charging trigger by BC1.2 detection */
+ {F_VCC_BC_DISEN, 1},
+ /* Disable automatic limitation of the input current */
+ {F_ILIM_AUTO_DISEN, 1},
+ /* Select current limitation when SDP charger attached*/
+ {F_SDP_500_SEL, 1},
+ /* Select current limitation when DCP charger attached */
+ {F_DCP_2500_SEL, 1},
+ {F_VSYSREG_SET, id->vsysreg_set},
+ /* Activate USB charging and DC/DC converter */
+ {F_USB_SUS, 0},
+ /* DCDC clock: 1200 kHz*/
+ {F_DCDC_CLK_SEL, 3},
+ /* Enable charging */
+ {F_CHG_EN, 1},
+ /* Disable Input current Limit setting voltage measurement */
+ {F_EXTIADPEN, 0},
+ /* Disable input current limiting */
+ {F_VSYS_PRIORITY, 1},
+ {F_IBUS_LIM_SET, id->ibus_lim_set},
+ {F_ICC_LIM_SET, id->icc_lim_set},
+ /* Charge Termination Current Setting to 0*/
+ {F_ITERM_SET, id->iterm_set},
+ /* Trickle-charge Current Setting */
+ {F_ITRICH_SET, id->itrich_set},
+ /* Pre-charge Current setting */
+ {F_IPRECH_SET, id->iprech_set},
+ /* Fast Charge Current for constant current phase */
+ {F_ICHG_SET, id->ichg_set},
+ /* Fast Charge Voltage Regulation Setting */
+ {F_VFASTCHG_REG_SET1, id->vfastchg_reg_set1},
+ /* Set Pre-charge Voltage Threshold for trickle charging. */
+ {F_VPRECHG_TH_SET, id->vprechg_th_set},
+ {F_VRECHG_SET, id->vrechg_set},
+ {F_VBATOVP_SET, id->vbatovp_set},
+ /* Reverse buck boost voltage Setting */
+ {F_VRBOOST_SET, 0},
+ /* Disable fast-charging watchdog */
+ {F_WDT_FST, 0},
+ /* Disable pre-charging watchdog */
+ {F_WDT_PRE, 0},
+ /* Power save off */
+ {F_POWER_SAVE_MODE, 0},
+ {F_INT1_SET, INT1_ALL},
+ {F_INT2_SET, INT2_ALL},
+ {F_INT3_SET, INT3_ALL},
+ {F_INT4_SET, INT4_ALL},
+ {F_INT5_SET, INT5_ALL},
+ {F_INT6_SET, INT6_ALL},
+ {F_INT7_SET, INT7_ALL},
+ };
+
+ /*
+ * Currently we initialize charger to a known state at startup.
+ * If we want to allow for example the boot code to initialize
+ * charger we should get rid of this.
+ */
+ ret = __bd9995x_chip_reset(bd);
+ if (ret < 0)
+ return ret;
+
+ /* Initialize currents/voltages and other parameters */
+ for (i = 0; i < ARRAY_SIZE(init_data); i++) {
+ ret = regmap_field_write(bd->rmap_fields[init_data[i].id],
+ init_data[i].value);
+ if (ret) {
+ dev_err(bd->dev, "failed to initialize charger (%d)\n",
+ ret);
+ return ret;
+ }
+ }
+
+ ret = bd9995x_get_chip_state(bd, &state);
+ if (ret < 0)
+ return ret;
+
+ mutex_lock(&bd->lock);
+ bd->state = state;
+ mutex_unlock(&bd->lock);
+
+ return 0;
+}
+
+static enum power_supply_property bd9995x_power_supply_props[] = {
+ POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+ POWER_SUPPLY_PROP_CHARGE_AVG,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+ POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+ /* Battery props we access through charger */
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+};
+
+static const struct power_supply_desc bd9995x_power_supply_desc = {
+ .name = "bd9995x-charger",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = bd9995x_power_supply_props,
+ .num_properties = ARRAY_SIZE(bd9995x_power_supply_props),
+ .get_property = bd9995x_power_supply_get_property,
+};
+
+/*
+ * Limit configurations for vbus-input-current and vcc-vacp-input-current
+ * Minimum limit is 0 uA. Max is 511 * 32000 uA = 16352000 uA. This is
+ * configured by writing a register so that each increment in register
+ * value equals to 32000 uA limit increment.
+ *
+ * Eg, value 0x0 is limit 0, value 0x1 is limit 32000, ...
+ * Describe the setting in linear_range table.
+ */
+static const struct linear_range input_current_limit_ranges[] = {
+ {
+ .min = 0,
+ .step = 32000,
+ .min_sel = 0x0,
+ .max_sel = 0x1ff,
+ },
+};
+
+/* Possible trickle, pre-charging and termination current values */
+static const struct linear_range charging_current_ranges[] = {
+ {
+ .min = 0,
+ .step = 64000,
+ .min_sel = 0x0,
+ .max_sel = 0x10,
+ }, {
+ .min = 1024000,
+ .step = 0,
+ .min_sel = 0x11,
+ .max_sel = 0x1f,
+ },
+};
+
+/*
+ * Fast charging voltage regulation, starting re-charging limit
+ * and battery over voltage protection have same possible values
+ */
+static const struct linear_range charge_voltage_regulation_ranges[] = {
+ {
+ .min = 2560000,
+ .step = 0,
+ .min_sel = 0,
+ .max_sel = 0xA0,
+ }, {
+ .min = 2560000,
+ .step = 16000,
+ .min_sel = 0xA0,
+ .max_sel = 0x4B0,
+ }, {
+ .min = 19200000,
+ .step = 0,
+ .min_sel = 0x4B0,
+ .max_sel = 0x7FF,
+ },
+};
+
+/* Possible VSYS voltage regulation values */
+static const struct linear_range vsys_voltage_regulation_ranges[] = {
+ {
+ .min = 2560000,
+ .step = 0,
+ .min_sel = 0,
+ .max_sel = 0x28,
+ }, {
+ .min = 2560000,
+ .step = 64000,
+ .min_sel = 0x28,
+ .max_sel = 0x12C,
+ }, {
+ .min = 19200000,
+ .step = 0,
+ .min_sel = 0x12C,
+ .max_sel = 0x1FF,
+ },
+};
+
+/* Possible settings for switching from trickle to pre-charging limits */
+static const struct linear_range trickle_to_pre_threshold_ranges[] = {
+ {
+ .min = 2048000,
+ .step = 0,
+ .min_sel = 0,
+ .max_sel = 0x20,
+ }, {
+ .min = 2048000,
+ .step = 64000,
+ .min_sel = 0x20,
+ .max_sel = 0x12C,
+ }, {
+ .min = 19200000,
+ .step = 0,
+ .min_sel = 0x12C,
+ .max_sel = 0x1FF
+ }
+};
+
+/* Possible current values for fast-charging constant current phase */
+static const struct linear_range fast_charge_current_ranges[] = {
+ {
+ .min = 0,
+ .step = 64000,
+ .min_sel = 0,
+ .max_sel = 0xFF,
+ }
+};
+
+struct battery_init {
+ const char *name;
+ int *info_data;
+ const struct linear_range *range;
+ int ranges;
+ u16 *data;
+};
+
+struct dt_init {
+ char *prop;
+ const struct linear_range *range;
+ int ranges;
+ u16 *data;
+};
+
+static int bd9995x_fw_probe(struct bd9995x_device *bd)
+{
+ int ret;
+ struct power_supply_battery_info info;
+ u32 property;
+ int i;
+ int regval;
+ bool found;
+ struct bd9995x_init_data *init = &bd->init_data;
+ struct battery_init battery_inits[] = {
+ {
+ .name = "trickle-charging current",
+ .info_data = &info.tricklecharge_current_ua,
+ .range = &charging_current_ranges[0],
+ .ranges = 2,
+ .data = &init->itrich_set,
+ }, {
+ .name = "pre-charging current",
+ .info_data = &info.precharge_current_ua,
+ .range = &charging_current_ranges[0],
+ .ranges = 2,
+ .data = &init->iprech_set,
+ }, {
+ .name = "pre-to-trickle charge voltage threshold",
+ .info_data = &info.precharge_voltage_max_uv,
+ .range = &trickle_to_pre_threshold_ranges[0],
+ .ranges = 2,
+ .data = &init->vprechg_th_set,
+ }, {
+ .name = "charging termination current",
+ .info_data = &info.charge_term_current_ua,
+ .range = &charging_current_ranges[0],
+ .ranges = 2,
+ .data = &init->iterm_set,
+ }, {
+ .name = "charging re-start voltage",
+ .info_data = &info.charge_restart_voltage_uv,
+ .range = &charge_voltage_regulation_ranges[0],
+ .ranges = 2,
+ .data = &init->vrechg_set,
+ }, {
+ .name = "battery overvoltage limit",
+ .info_data = &info.overvoltage_limit_uv,
+ .range = &charge_voltage_regulation_ranges[0],
+ .ranges = 2,
+ .data = &init->vbatovp_set,
+ }, {
+ .name = "fast-charging max current",
+ .info_data = &info.constant_charge_current_max_ua,
+ .range = &fast_charge_current_ranges[0],
+ .ranges = 1,
+ .data = &init->ichg_set,
+ }, {
+ .name = "fast-charging voltage",
+ .info_data = &info.constant_charge_voltage_max_uv,
+ .range = &charge_voltage_regulation_ranges[0],
+ .ranges = 2,
+ .data = &init->vfastchg_reg_set1,
+ },
+ };
+ struct dt_init props[] = {
+ {
+ .prop = "rohm,vsys-regulation-microvolt",
+ .range = &vsys_voltage_regulation_ranges[0],
+ .ranges = 2,
+ .data = &init->vsysreg_set,
+ }, {
+ .prop = "rohm,vbus-input-current-limit-microamp",
+ .range = &input_current_limit_ranges[0],
+ .ranges = 1,
+ .data = &init->ibus_lim_set,
+ }, {
+ .prop = "rohm,vcc-input-current-limit-microamp",
+ .range = &input_current_limit_ranges[0],
+ .ranges = 1,
+ .data = &init->icc_lim_set,
+ },
+ };
+
+ /*
+ * The power_supply_get_battery_info() does not support getting values
+ * from ACPI. Let's fix it if ACPI is required here.
+ */
+ ret = power_supply_get_battery_info(bd->charger, &info);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < ARRAY_SIZE(battery_inits); i++) {
+ int val = *battery_inits[i].info_data;
+ const struct linear_range *range = battery_inits[i].range;
+ int ranges = battery_inits[i].ranges;
+
+ if (val == -EINVAL)
+ continue;
+
+ ret = linear_range_get_selector_low_array(range, ranges, val,
+ &regval, &found);
+ if (ret) {
+ dev_err(bd->dev, "Unsupported value for %s\n",
+ battery_inits[i].name);
+
+ power_supply_put_battery_info(bd->charger, &info);
+ return -EINVAL;
+ }
+ if (!found) {
+ dev_warn(bd->dev,
+ "Unsupported value for %s - using smaller\n",
+ battery_inits[i].name);
+ }
+ *(battery_inits[i].data) = regval;
+ }
+
+ power_supply_put_battery_info(bd->charger, &info);
+
+ for (i = 0; i < ARRAY_SIZE(props); i++) {
+ ret = device_property_read_u32(bd->dev, props[i].prop,
+ &property);
+ if (ret < 0) {
+ dev_err(bd->dev, "failed to read %s", props[i].prop);
+
+ return ret;
+ }
+
+ ret = linear_range_get_selector_low_array(props[i].range,
+ props[i].ranges,
+ property, &regval,
+ &found);
+ if (ret) {
+ dev_err(bd->dev, "Unsupported value for '%s'\n",
+ props[i].prop);
+
+ return -EINVAL;
+ }
+
+ if (!found) {
+ dev_warn(bd->dev,
+ "Unsupported value for '%s' - using smaller\n",
+ props[i].prop);
+ }
+
+ *(props[i].data) = regval;
+ }
+
+ return 0;
+}
+
+void bd9995x_chip_reset(void *bd)
+{
+ __bd9995x_chip_reset(bd);
+}
+
+static int bd9995x_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct bd9995x_device *bd;
+ struct power_supply_config psy_cfg = {};
+ int ret;
+ int i;
+
+ bd = devm_kzalloc(dev, sizeof(*bd), GFP_KERNEL);
+ if (!bd)
+ return -ENOMEM;
+
+ bd->client = client;
+ bd->dev = dev;
+ psy_cfg.drv_data = bd;
+ psy_cfg.of_node = dev->of_node;
+
+ mutex_init(&bd->lock);
+
+ bd->rmap = devm_regmap_init_i2c(client, &bd9995x_regmap_config);
+ if (IS_ERR(bd->rmap)) {
+ dev_err(dev, "Failed to setup register access via i2c\n");
+ return PTR_ERR(bd->rmap);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(bd9995x_reg_fields); i++) {
+ const struct reg_field *reg_fields = bd9995x_reg_fields;
+
+ bd->rmap_fields[i] = devm_regmap_field_alloc(dev, bd->rmap,
+ reg_fields[i]);
+ if (IS_ERR(bd->rmap_fields[i])) {
+ dev_err(dev, "cannot allocate regmap field\n");
+ return PTR_ERR(bd->rmap_fields[i]);
+ }
+ }
+
+ i2c_set_clientdata(client, bd);
+
+ ret = regmap_field_read(bd->rmap_fields[F_CHIP_ID], &bd->chip_id);
+ if (ret) {
+ dev_err(dev, "Cannot read chip ID.\n");
+ return ret;
+ }
+
+ if (bd->chip_id != BD99954_ID) {
+ dev_err(dev, "Chip with ID=0x%x, not supported!\n",
+ bd->chip_id);
+ return -ENODEV;
+ }
+
+ ret = regmap_field_read(bd->rmap_fields[F_CHIP_REV], &bd->chip_rev);
+ if (ret) {
+ dev_err(dev, "Cannot read revision.\n");
+ return ret;
+ }
+
+ dev_info(bd->dev, "Found BD99954 chip rev %d\n", bd->chip_rev);
+
+ /*
+ * We need to init the psy before we can call
+ * power_supply_get_battery_info() for it
+ */
+ bd->charger = devm_power_supply_register(bd->dev,
+ &bd9995x_power_supply_desc,
+ &psy_cfg);
+ if (IS_ERR(bd->charger)) {
+ dev_err(dev, "Failed to register power supply\n");
+ return PTR_ERR(bd->charger);
+ }
+
+ ret = bd9995x_fw_probe(bd);
+ if (ret < 0) {
+ dev_err(dev, "Cannot read device properties.\n");
+ return ret;
+ }
+
+ ret = bd9995x_hw_init(bd);
+ if (ret < 0) {
+ dev_err(dev, "Cannot initialize the chip.\n");
+ return ret;
+ }
+
+ ret = devm_add_action_or_reset(dev, bd9995x_chip_reset, bd);
+ if (ret)
+ return ret;
+
+ return devm_request_threaded_irq(dev, client->irq, NULL,
+ bd9995x_irq_handler_thread,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ BD9995X_IRQ_PIN, bd);
+}
+
+static const struct of_device_id bd9995x_of_match[] = {
+ { .compatible = "rohm,bd99954", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, bd9995x_of_match);
+
+static struct i2c_driver bd9995x_driver = {
+ .driver = {
+ .name = "bd9995x-charger",
+ .of_match_table = bd9995x_of_match,
+ },
+ .probe_new = bd9995x_probe,
+};
+module_i2c_driver(bd9995x_driver);
+
+MODULE_AUTHOR("Laine Markus <markus.laine@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("ROHM BD99954 charger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/bd99954-charger.h b/drivers/power/supply/bd99954-charger.h
new file mode 100644
index 000000000000..f58897925383
--- /dev/null
+++ b/drivers/power/supply/bd99954-charger.h
@@ -0,0 +1,1075 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (C) 2020 ROHM Semiconductors */
+#ifndef BD99954_CHARGER_H
+#define BD99954_CHARGER_H
+
+#include <linux/regmap.h>
+
+#define BD9995X_MANUFACTURER "Rohm Semiconductor"
+#define BD9995X_IRQ_PIN "bd9995x_irq"
+
+#define BD9995X_VSYS_PRECHARGE_OFFSET_MV 200
+
+#define BD99954_ID 0x346
+#define BD99955_ID 0x221
+#define BD99956_ID 0x331
+
+/* Battery Charger Commands */
+#define CHARGING_CURRENT 0x14
+#define CHARGING_VOLTAGE 0x15
+#define PROTECT_SET 0x3E
+#define MAP_SET 0x3F
+
+/* Extended commands */
+#define CHGSTM_STATUS 0x100
+#define VBAT_VSYS_STATUS 0x101
+#define VBUS_VCC_STATUS 0x102
+#define CHGOP_STATUS 0x103
+#define WDT_STATUS 0x104
+#define CUR_ILIM_VAL 0x105
+#define SEL_ILIM_VAL 0x106
+#define IBUS_LIM_SET 0x107
+#define ICC_LIM_SET 0x108
+#define IOTG_LIM_SET 0x109
+#define VIN_CTRL_SET 0x10A
+#define CHGOP_SET1 0x10B
+#define CHGOP_SET2 0x10C
+#define VBUSCLPS_TH_SET 0x10D
+#define VCCCLPS_TH_SET 0x10E
+#define CHGWDT_SET 0x10F
+#define BATTWDT_SET 0x110
+#define VSYSREG_SET 0x111
+#define VSYSVAL_THH_SET 0x112
+#define VSYSVAL_THL_SET 0x113
+#define ITRICH_SET 0x114
+#define IPRECH_SET 0x115
+#define ICHG_SET 0x116
+#define ITERM_SET 0x117
+#define VPRECHG_TH_SET 0x118
+#define VRBOOST_SET 0x119
+#define VFASTCHG_REG_SET1 0x11A
+#define VFASTCHG_REG_SET2 0x11B
+#define VFASTCHG_REG_SET3 0x11C
+#define VRECHG_SET 0x11D
+#define VBATOVP_SET 0x11E
+#define IBATSHORT_SET 0x11F
+#define PROCHOT_CTRL_SET 0x120
+#define PROCHOT_ICRIT_SET 0x121
+#define PROCHOT_INORM_SET 0x122
+#define PROCHOT_IDCHG_SET 0x123
+#define PROCHOT_VSYS_SET 0x124
+#define PMON_IOUT_CTRL_SET 0x125
+#define PMON_DACIN_VAL 0x126
+#define IOUT_DACIN_VAL 0x127
+#define VCC_UCD_SET 0x128
+#define VCC_UCD_STATUS 0x129
+#define VCC_IDD_STATUS 0x12A
+#define VCC_UCD_FCTRL_SET 0x12B
+#define VCC_UCD_FCTRL_EN 0x12C
+#define VBUS_UCD_SET 0x130
+#define VBUS_UCD_STATUS 0x131
+#define VBUS_IDD_STATUS 0x132
+#define VBUS_UCD_FCTRL_SET 0x133
+#define VBUS_UCD_FCTRL_EN 0x134
+#define CHIP_ID 0x138
+#define CHIP_REV 0x139
+#define IC_SET1 0x13A
+#define IC_SET2 0x13B
+#define SYSTEM_STATUS 0x13C
+#define SYSTEM_CTRL_SET 0x13D
+#define VM_CTRL_SET 0x140
+#define THERM_WINDOW_SET1 0x141
+#define THERM_WINDOW_SET2 0x142
+#define THERM_WINDOW_SET3 0x143
+#define THERM_WINDOW_SET4 0x144
+#define THERM_WINDOW_SET5 0x145
+#define IBATP_TH_SET 0x146
+#define IBATM_TH_SET 0x147
+#define VBAT_TH_SET 0x148
+#define THERM_TH_SET 0x149
+#define IACP_TH_SET 0x14A
+#define VACP_TH_SET 0x14B
+#define VBUS_TH_SET 0x14C
+#define VCC_TH_SET 0x14D
+#define VSYS_TH_SET 0x14E
+#define EXTIADP_TH_SET 0x14F
+#define IBATP_VAL 0x150
+#define IBATP_AVE_VAL 0x151
+#define IBATM_VAL 0x152
+#define IBATM_AVE_VAL 0x153
+#define VBAT_VAL 0x154
+#define VBAT_AVE_VAL 0x155
+#define THERM_VAL 0x156
+#define VTH_VAL 0x157
+#define IACP_VAL 0x158
+#define IACP_AVE_VAL 0x159
+#define VACP_VAL 0x15A
+#define VACP_AVE_VAL 0x15B
+#define VBUS_VAL 0x15C
+#define VBUS_AVE_VAL 0x15D
+#define VCC_VAL 0x15E
+#define VCC_AVE_VAL 0x15F
+#define VSYS_VAL 0x160
+#define VSYS_AVE_VAL 0x161
+#define EXTIADP_VAL 0x162
+#define EXTIADP_AVE_VAL 0x163
+#define VACPCLPS_TH_SET 0x164
+#define INT0_SET 0x168
+#define INT1_SET 0x169
+#define INT2_SET 0x16A
+#define INT3_SET 0x16B
+#define INT4_SET 0x16C
+#define INT5_SET 0x16D
+#define INT6_SET 0x16E
+#define INT7_SET 0x16F
+#define INT0_STATUS 0x170
+#define INT1_STATUS 0x171
+#define INT2_STATUS 0x172
+#define INT3_STATUS 0x173
+#define INT4_STATUS 0x174
+#define INT5_STATUS 0x175
+#define INT6_STATUS 0x176
+#define INT7_STATUS 0x177
+#define OTPREG0 0x17A
+#define OTPREG1 0x17B
+#define SMBREG 0x17C
+#define DEBUG_MODE_SET 0x17F
+#define DEBUG0x14 0x214
+#define DEBUG0x1A 0x21A
+
+enum bd9995x_fields {
+ F_PREV_CHGSTM_STATE, F_CHGSTM_STATE,
+ F_VBAT_VSYS_STATUS,
+ F_VBUS_VCC_STATUS,
+ F_BATTEMP, F_VRECHG_DET, F_RBOOST_UV, F_RBOOSTS,
+ F_THERMWDT_VAL, F_CHGWDT_VAL,
+ F_CUR_ILIM_VAL,
+ F_SEL_ILIM_VAL,
+ F_IBUS_LIM_SET,
+ F_ICC_LIM_SET,
+ F_IOTG_LIM_SET,
+ F_OTG_BOTH_EN,
+ F_VRBOOST_TRIG,
+ F_VRBOOST_EN,
+ F_PP_BOTH_THRU,
+ F_VIN_ORD,
+ F_VBUS_EN,
+ F_VCC_EN,
+ F_VSYS_PRIORITY,
+ F_PPC_SUB_CAP,
+ F_PPC_CAP,
+ F_DCP_2500_SEL,
+ F_SDP_500_SEL,
+ F_ILIM_AUTO_DISEN,
+ F_VCC_BC_DISEN,
+ F_VBUS_BC_DISEN,
+ F_SDP_CHG_TRIG_EN,
+ F_SDP_CHG_TRIG,
+ F_AUTO_TOF,
+ F_AUTO_FST,
+ F_AUTO_RECH,
+ F_ILIM_RESET_EN,
+ F_DCDC_1MS_SEL,
+ F_SEL_ILIM_DIV,
+ F_BATT_LEARN,
+ F_CHG_EN,
+ F_USB_SUS,
+ F_CHOP_SS_INIT,
+ F_CHOP_ALL_INIT,
+ F_DCDC_CLK_SEL,
+ F_CHOP_SS,
+ F_CHOP_ALL,
+ F_VBUSCLPS_TH_SET,
+ F_VCCCLPS_TH_SET,
+ F_WDT_FST,
+ F_WDT_PRE,
+ F_WDT_IBAT_SHORT,
+ F_WDT_THERM,
+ F_VSYSREG_SET,
+ F_VSYSVAL_THH_SET,
+ F_VSYSVAL_THL_SET,
+ F_ITRICH_SET,
+ F_IPRECH_SET,
+ F_ICHG_SET,
+ F_ITERM_SET,
+ F_VPRECHG_TH_SET,
+ F_VRBOOST_SET,
+ F_VFASTCHG_REG_SET1,
+ F_VFASTCHG_REG_SET2,
+ F_VFASTCHG_REG_SET3,
+ F_VRECHG_SET,
+ F_VBATOVP_SET,
+ F_IBATM_SHORT_SET,
+ F_PROCHOT_DG_SET,
+ F_PROCHOT_ICRIT_DG_SET,
+ F_PROCHOT_IDCHG_DG_SET,
+ F_PROCHOT_EN,
+ F_PROCHOT_ICRIT_SET,
+ F_PROCHOT_INORM_SET,
+ F_PROCHOT_IDCHG_SET,
+ F_PROCHOT_VSYS_SET,
+ F_IMON_INSEL,
+ F_PMON_INSEL,
+ F_IOUT_OUT_EN,
+ F_IOUT_SOURCE_SEL,
+ F_IOUT_GAIN_SET,
+ F_PMON_OUT_EN,
+ F_PMON_GAIN_SET,
+ F_PMON_DACIN_VAL,
+ F_IOUT_DACIN_VAL,
+ F_VCC_BCSRETRY,
+ F_VCC_ADCRTRY,
+ F_VCC_USBDETEN,
+ F_VCC_IDRDETEN,
+ F_VCC_ENUMRDY,
+ F_VCC_ADCPOLEN,
+ F_VCC_DCDMODE,
+ F_VCC_USB_SW_EN,
+ F_VCC_USB_SW,
+ F_VCC_DCDFAIL,
+ F_VCC_CHGPORT,
+ F_VCC_PUPDET,
+ F_VCC_VBUS_VLD,
+ F_VCC_CHGDET,
+ F_VCC_OTGDET,
+ F_VCC_VBINOP,
+ F_VCC_EXTID,
+ F_VCC_IDRDET,
+ F_VCC_INDO,
+ F_VCC_UCDSWEN,
+ F_VCC_RREF_EN,
+ F_VCC_DPPU_EN,
+ F_VCC_DPREF_EN,
+ F_VCC_DMREF_EN,
+ F_VCC_DPDET_EN,
+ F_VCC_DMDET_EN,
+ F_VCC_DPSINK_EN,
+ F_VCC_DMSINK_EN,
+ F_VCC_DP_BUFF_EN,
+ F_VCC_DM_BUFF_EN,
+ F_VCC_EXTCLKENBL,
+ F_VCC_PLSTESTEN,
+ F_VCC_UCDSWEN_TSTENB,
+ F_VCC_RREF_EN_TSTENB,
+ F_VCC_DPPU_EN_TSTENB,
+ F_VCC_DPREF_EN_TSTENB,
+ F_VCC_DMREF_EN_TSTENB,
+ F_VCC_DPDET_EN_TSTENB,
+ F_VCC_DMDET_EN_TSTENB,
+ F_VCC_DPSINK_EN_TSTENB,
+ F_VCC_DMSINK_EN_TSTENB,
+ F_VCC_DP_BUFF_EN_TSTENB,
+ F_VCC_DM_BUFF_EN_TSTENB,
+ F_VBUS_BCSRETRY,
+ F_VBUS_ADCRTRY,
+ F_VBUS_USBDETEN,
+ F_VBUS_IDRDETEN,
+ F_VBUS_ENUMRDY,
+ F_VBUS_ADCPOLEN,
+ F_VBUS_DCDMODE,
+ F_VBUS_USB_SW_EN,
+ F_VBUS_USB_SW,
+ F_VBUS_DCDFAIL,
+ F_VBUS_CHGPORT,
+ F_VBUS_PUPDET,
+ F_VBUS_VBUS_VLD,
+ F_VBUS_CHGDET,
+ F_VBUS_OTGDET,
+ F_VBUS_VBINOP,
+ F_VBUS_EXTID,
+ F_VBUS_IDRDET,
+ F_VBUS_INDO,
+ F_VBUS_UCDSWEN,
+ F_VBUS_RREF_EN,
+ F_VBUS_DPPU_EN,
+ F_VBUS_DPREF_EN,
+ F_VBUS_DMREF_EN,
+ F_VBUS_DPDET_EN,
+ F_VBUS_DMDET_EN,
+ F_VBUS_DPSINK_EN,
+ F_VBUS_DMSINK_EN,
+ F_VBUS_DP_BUFF_EN,
+ F_VBUS_DM_BUFF_EN,
+ F_VBUS_EXTCLKENBL,
+ F_VBUS_PLSTESTEN,
+ F_VBUS_UCDSWEN_TSTENB,
+ F_VBUS_RREF_EN_TSTENB,
+ F_VBUS_DPPU_EN_TSTENB,
+ F_VBUS_DPREF_EN_TSTENB,
+ F_VBUS_DMREF_EN_TSTENB,
+ F_VBUS_DPDET_EN_TSTENB,
+ F_VBUS_DMDET_EN_TSTENB,
+ F_VBUS_DPSINK_EN_TSTENB,
+ F_VBUS_DMSINK_EN_TSTENB,
+ F_VBUS_DP_BUFF_EN_TSTENB,
+ F_VBUS_DM_BUFF_EN_TSTENB,
+ F_CHIP_ID,
+ F_CHIP_REV,
+ F_ONE_CELL_MODE,
+ F_cell,
+ F_VACP_AUTO_DISCHG,
+ F_VACP_LOAD,
+ F_ACOK_POL,
+ F_ACOK_DISEN,
+ F_DEBUG_SET1,
+ F_DEBUG_SET0,
+ F_MONRST_STATE,
+ F_ALMRST_STATE,
+ F_CHGRST_STATE,
+ F_OTPLD_STATE,
+ F_ALLRST_STATE,
+ F_PROTECT_SET,
+ F_MAP_SET,
+ F_ADCINTERVAL,
+ F_ADCMOD,
+ F_ADCTMOD,
+ F_EXTIADPEN,
+ F_VSYSENB,
+ F_VCCENB,
+ F_VBUSENB,
+ F_VACPENB,
+ F_IACPENB,
+ F_THERMENB,
+ F_VBATENB,
+ F_IBATMENB,
+ F_IBATPENB,
+ F_TMPTHR1B,
+ F_TMPTHR1A,
+ F_TMPTHR2B,
+ F_TMPTHR2A,
+ F_TMPTHR3B,
+ F_TMPTHR3A,
+ F_TMPTHR4B,
+ F_TMPTHR4A,
+ F_TMPTHR5B,
+ F_TMPTHR5A,
+ F_IBATP_TH_SET,
+ F_IBATM_TH_SET,
+ F_VBAT_TH_SET,
+ F_THERM_TH_SET,
+ F_IACP_TH_SET,
+ F_VACP_TH_SET,
+ F_VBUS_TH_SET,
+ F_VCC_TH_SET,
+ F_VSYS_TH_SET,
+ F_EXTIADP_TH_SET,
+ F_IBATP_VAL,
+ F_IBATP_AVE_VAL,
+ F_IBATM_VAL,
+ F_IBATM_AVE_VAL,
+ F_VBAT_VAL,
+ F_VBAT_AVE_VAL,
+ F_THERM_VAL,
+ F_VTH_VAL,
+ F_IACP_VAL,
+ F_IACP_AVE_VAL,
+ F_VACP_VAL,
+ F_VACP_AVE_VAL,
+ F_VBUS_VAL,
+ F_VBUS_AVE_VAL,
+ F_VCC_VAL,
+ F_VCC_AVE_VAL,
+ F_VSYS_VAL,
+ F_VSYS_AVE_VAL,
+ F_EXTIADP_VAL,
+ F_EXTIADP_AVE_VAL,
+ F_VACPCLPS_TH_SET,
+ F_INT7_SET,
+ F_INT6_SET,
+ F_INT5_SET,
+ F_INT4_SET,
+ F_INT3_SET,
+ F_INT2_SET,
+ F_INT1_SET,
+ F_INT0_SET,
+ F_VBUS_RBUV_DET,
+ F_VBUS_RBUV_RES,
+ F_VBUS_TH_DET,
+ F_VBUS_TH_RES,
+ F_VBUS_IIN_MOD,
+ F_VBUS_OV_DET,
+ F_VBUS_OV_RES,
+ F_VBUS_CLPS_DET,
+ F_VBUS_CLPS,
+ F_VBUS_DET,
+ F_VBUS_RES,
+ F_VCC_RBUV_DET,
+ F_VCC_RBUV_RES,
+ F_VCC_TH_DET,
+ F_VCC_TH_RES,
+ F_VCC_IIN_MOD,
+ F_VCC_OVP_DET,
+ F_VCC_OVP_RES,
+ F_VCC_CLPS_DET,
+ F_VCC_CLPS_RES,
+ F_VCC_DET,
+ F_VCC_RES,
+ F_TH_DET,
+ F_TH_RMV,
+ F_TMP_OUT_DET,
+ F_TMP_OUT_RES,
+ F_VBAT_TH_DET,
+ F_VBAT_TH_RES,
+ F_IBAT_SHORT_DET,
+ F_IBAT_SHORT_RES,
+ F_VBAT_OV_DET,
+ F_VBAT_OV_RES,
+ F_BAT_ASSIST_DET,
+ F_BAT_ASSIST_RES,
+ F_VSYS_TH_DET,
+ F_VSYS_TH_RES,
+ F_VSYS_OV_DET,
+ F_VSYS_OV_RES,
+ F_VSYS_SHT_DET,
+ F_VSYS_SHT_RES,
+ F_VSYS_UV_DET,
+ F_VSYS_UV_RES,
+ F_OTP_LOAD_DONE,
+ F_PWR_ON,
+ F_EXTIADP_TRNS,
+ F_EXTIADP_TH_DET,
+ F_EXIADP_TH_RES,
+ F_BAT_MNT_DET,
+ F_BAT_MNT_RES,
+ F_TSD_DET,
+ F_TSD_RES,
+ F_CHGWDT_EXP,
+ F_THERMWDT_EXP,
+ F_TMP_TRNS,
+ F_CHG_TRNS,
+ F_VBUS_UCD_PORT_DET,
+ F_VBUS_UCD_UCHG_DET,
+ F_VBUS_UCD_URID_RMV,
+ F_VBUS_UCD_OTG_DET,
+ F_VBUS_UCD_URID_MOD,
+ F_VCC_UCD_PORT_DET,
+ F_VCC_UCD_UCHG_DET,
+ F_VCC_UCD_URID_RMV,
+ F_VCC_UCD_OTG_DET,
+ F_VCC_UCD_URID_MOD,
+ F_PROCHOT_DET,
+ F_PROCHOT_RES,
+ F_VACP_DET,
+ F_VACP_RES,
+ F_VACP_TH_DET,
+ F_VACP_TH_RES,
+ F_IACP_TH_DET,
+ F_IACP_THE_RES,
+ F_THERM_TH_DET,
+ F_THERM_TH_RES,
+ F_IBATM_TH_DET,
+ F_IBATM_TH_RES,
+ F_IBATP_TH_DET,
+ F_IBATP_TH_RES,
+ F_INT7_STATUS,
+ F_INT6_STATUS,
+ F_INT5_STATUS,
+ F_INT4_STATUS,
+ F_INT3_STATUS,
+ F_INT2_STATUS,
+ F_INT1_STATUS,
+ F_INT0_STATUS,
+ F_ILIM_DECREASE,
+ F_RESERVE_OTPREG1,
+ F_POWER_SAVE_MODE,
+ F_DEBUG_MODE_SET,
+ F_DEBUG0x14,
+ F_DEBUG0x1A,
+ F_MAX_FIELDS
+};
+
+static const struct reg_field bd9995x_reg_fields[] = {
+ [F_PREV_CHGSTM_STATE] = REG_FIELD(CHGSTM_STATUS, 8, 14),
+ [F_CHGSTM_STATE] = REG_FIELD(CHGSTM_STATUS, 0, 6),
+ [F_VBAT_VSYS_STATUS] = REG_FIELD(VBAT_VSYS_STATUS, 0, 15),
+ [F_VBUS_VCC_STATUS] = REG_FIELD(VBUS_VCC_STATUS, 0, 12),
+ [F_BATTEMP] = REG_FIELD(CHGOP_STATUS, 8, 10),
+ [F_VRECHG_DET] = REG_FIELD(CHGOP_STATUS, 6, 6),
+ [F_RBOOST_UV] = REG_FIELD(CHGOP_STATUS, 1, 1),
+ [F_RBOOSTS] = REG_FIELD(CHGOP_STATUS, 0, 0),
+ [F_THERMWDT_VAL] = REG_FIELD(WDT_STATUS, 8, 15),
+ [F_CHGWDT_VAL] = REG_FIELD(WDT_STATUS, 0, 7),
+ [F_CUR_ILIM_VAL] = REG_FIELD(CUR_ILIM_VAL, 0, 13),
+ [F_SEL_ILIM_VAL] = REG_FIELD(SEL_ILIM_VAL, 0, 13),
+ [F_IBUS_LIM_SET] = REG_FIELD(IBUS_LIM_SET, 5, 13),
+ [F_ICC_LIM_SET] = REG_FIELD(ICC_LIM_SET, 5, 13),
+ [F_IOTG_LIM_SET] = REG_FIELD(IOTG_LIM_SET, 5, 13),
+ [F_OTG_BOTH_EN] = REG_FIELD(VIN_CTRL_SET, 15, 15),
+ [F_VRBOOST_TRIG] = REG_FIELD(VIN_CTRL_SET, 14, 14),
+ [F_VRBOOST_EN] = REG_FIELD(VIN_CTRL_SET, 12, 13),
+ [F_PP_BOTH_THRU] = REG_FIELD(VIN_CTRL_SET, 11, 11),
+ [F_VIN_ORD] = REG_FIELD(VIN_CTRL_SET, 7, 7),
+ [F_VBUS_EN] = REG_FIELD(VIN_CTRL_SET, 6, 6),
+ [F_VCC_EN] = REG_FIELD(VIN_CTRL_SET, 5, 5),
+ [F_VSYS_PRIORITY] = REG_FIELD(VIN_CTRL_SET, 4, 4),
+ [F_PPC_SUB_CAP] = REG_FIELD(VIN_CTRL_SET, 2, 3),
+ [F_PPC_CAP] = REG_FIELD(VIN_CTRL_SET, 0, 1),
+ [F_DCP_2500_SEL] = REG_FIELD(CHGOP_SET1, 15, 15),
+ [F_SDP_500_SEL] = REG_FIELD(CHGOP_SET1, 14, 14),
+ [F_ILIM_AUTO_DISEN] = REG_FIELD(CHGOP_SET1, 13, 13),
+ [F_VCC_BC_DISEN] = REG_FIELD(CHGOP_SET1, 11, 11),
+ [F_VBUS_BC_DISEN] = REG_FIELD(CHGOP_SET1, 10, 10),
+ [F_SDP_CHG_TRIG_EN] = REG_FIELD(CHGOP_SET1, 9, 9),
+ [F_SDP_CHG_TRIG] = REG_FIELD(CHGOP_SET1, 8, 8),
+ [F_AUTO_TOF] = REG_FIELD(CHGOP_SET1, 6, 6),
+ [F_AUTO_FST] = REG_FIELD(CHGOP_SET1, 5, 5),
+ [F_AUTO_RECH] = REG_FIELD(CHGOP_SET1, 3, 3),
+ [F_ILIM_RESET_EN] = REG_FIELD(CHGOP_SET2, 14, 14),
+ [F_DCDC_1MS_SEL] = REG_FIELD(CHGOP_SET2, 12, 13),
+ [F_SEL_ILIM_DIV] = REG_FIELD(CHGOP_SET2, 10, 10),
+ [F_BATT_LEARN] = REG_FIELD(CHGOP_SET2, 8, 8),
+ [F_CHG_EN] = REG_FIELD(CHGOP_SET2, 7, 7),
+ [F_USB_SUS] = REG_FIELD(CHGOP_SET2, 6, 6),
+ [F_CHOP_SS_INIT] = REG_FIELD(CHGOP_SET2, 5, 5),
+ [F_CHOP_ALL_INIT] = REG_FIELD(CHGOP_SET2, 4, 4),
+ [F_DCDC_CLK_SEL] = REG_FIELD(CHGOP_SET2, 2, 3),
+ [F_CHOP_SS] = REG_FIELD(CHGOP_SET2, 1, 1),
+ [F_CHOP_ALL] = REG_FIELD(CHGOP_SET2, 0, 0),
+ [F_VBUSCLPS_TH_SET] = REG_FIELD(VBUSCLPS_TH_SET, 7, 14),
+ [F_VCCCLPS_TH_SET] = REG_FIELD(VCCCLPS_TH_SET, 7, 14),
+ [F_WDT_FST] = REG_FIELD(CHGWDT_SET, 8, 15),
+ [F_WDT_PRE] = REG_FIELD(CHGWDT_SET, 0, 7),
+ [F_WDT_IBAT_SHORT] = REG_FIELD(BATTWDT_SET, 8, 15),
+ [F_WDT_THERM] = REG_FIELD(BATTWDT_SET, 0, 7),
+ [F_VSYSREG_SET] = REG_FIELD(VSYSREG_SET, 6, 14),
+ [F_VSYSVAL_THH_SET] = REG_FIELD(VSYSVAL_THH_SET, 6, 14),
+ [F_VSYSVAL_THL_SET] = REG_FIELD(VSYSVAL_THL_SET, 6, 14),
+ [F_ITRICH_SET] = REG_FIELD(ITRICH_SET, 6, 10),
+ [F_IPRECH_SET] = REG_FIELD(IPRECH_SET, 6, 10),
+ [F_ICHG_SET] = REG_FIELD(ICHG_SET, 6, 13),
+ [F_ITERM_SET] = REG_FIELD(ITERM_SET, 6, 10),
+ [F_VPRECHG_TH_SET] = REG_FIELD(VPRECHG_TH_SET, 6, 14),
+ [F_VRBOOST_SET] = REG_FIELD(VRBOOST_SET, 6, 14),
+ [F_VFASTCHG_REG_SET1] = REG_FIELD(VFASTCHG_REG_SET1, 4, 14),
+ [F_VFASTCHG_REG_SET2] = REG_FIELD(VFASTCHG_REG_SET2, 4, 14),
+ [F_VFASTCHG_REG_SET3] = REG_FIELD(VFASTCHG_REG_SET3, 4, 14),
+ [F_VRECHG_SET] = REG_FIELD(VRECHG_SET, 4, 14),
+ [F_VBATOVP_SET] = REG_FIELD(VBATOVP_SET, 4, 14),
+ [F_IBATM_SHORT_SET] = REG_FIELD(IBATSHORT_SET, 0, 14),
+ [F_PROCHOT_DG_SET] = REG_FIELD(PROCHOT_CTRL_SET, 14, 15),
+ [F_PROCHOT_ICRIT_DG_SET] = REG_FIELD(PROCHOT_CTRL_SET, 10, 11),
+ [F_PROCHOT_IDCHG_DG_SET] = REG_FIELD(PROCHOT_CTRL_SET, 8, 9),
+ [F_PROCHOT_EN] = REG_FIELD(PROCHOT_CTRL_SET, 0, 4),
+ [F_PROCHOT_ICRIT_SET] = REG_FIELD(PROCHOT_ICRIT_SET, 0, 14),
+ [F_PROCHOT_INORM_SET] = REG_FIELD(PROCHOT_INORM_SET, 0, 14),
+ [F_PROCHOT_IDCHG_SET] = REG_FIELD(PROCHOT_IDCHG_SET, 0, 14),
+ [F_PROCHOT_VSYS_SET] = REG_FIELD(PROCHOT_VSYS_SET, 0, 14),
+ [F_IMON_INSEL] = REG_FIELD(PMON_IOUT_CTRL_SET, 9, 9),
+ [F_PMON_INSEL] = REG_FIELD(PMON_IOUT_CTRL_SET, 8, 8),
+ [F_IOUT_OUT_EN] = REG_FIELD(PMON_IOUT_CTRL_SET, 7, 7),
+ [F_IOUT_SOURCE_SEL] = REG_FIELD(PMON_IOUT_CTRL_SET, 6, 6),
+ [F_IOUT_GAIN_SET] = REG_FIELD(PMON_IOUT_CTRL_SET, 4, 5),
+ [F_PMON_OUT_EN] = REG_FIELD(PMON_IOUT_CTRL_SET, 3, 3),
+ [F_PMON_GAIN_SET] = REG_FIELD(PMON_IOUT_CTRL_SET, 0, 2),
+ [F_PMON_DACIN_VAL] = REG_FIELD(PMON_DACIN_VAL, 0, 9),
+ [F_IOUT_DACIN_VAL] = REG_FIELD(IOUT_DACIN_VAL, 0, 11),
+ [F_VCC_BCSRETRY] = REG_FIELD(VCC_UCD_SET, 12, 12),
+ [F_VCC_ADCRTRY] = REG_FIELD(VCC_UCD_SET, 8, 8),
+ [F_VCC_USBDETEN] = REG_FIELD(VCC_UCD_SET, 7, 7),
+ [F_VCC_IDRDETEN] = REG_FIELD(VCC_UCD_SET, 6, 6),
+ [F_VCC_ENUMRDY] = REG_FIELD(VCC_UCD_SET, 5, 5),
+ [F_VCC_ADCPOLEN] = REG_FIELD(VCC_UCD_SET, 4, 4),
+ [F_VCC_DCDMODE] = REG_FIELD(VCC_UCD_SET, 3, 3),
+ [F_VCC_USB_SW_EN] = REG_FIELD(VCC_UCD_SET, 1, 1),
+ [F_VCC_USB_SW] = REG_FIELD(VCC_UCD_SET, 0, 0),
+ [F_VCC_DCDFAIL] = REG_FIELD(VCC_UCD_STATUS, 15, 15),
+ [F_VCC_CHGPORT] = REG_FIELD(VCC_UCD_STATUS, 12, 13),
+ [F_VCC_PUPDET] = REG_FIELD(VCC_UCD_STATUS, 11, 11),
+ [F_VCC_VBUS_VLD] = REG_FIELD(VCC_UCD_STATUS, 7, 7),
+ [F_VCC_CHGDET] = REG_FIELD(VCC_UCD_STATUS, 6, 6),
+ [F_VCC_OTGDET] = REG_FIELD(VCC_UCD_STATUS, 3, 3),
+ [F_VCC_VBINOP] = REG_FIELD(VCC_IDD_STATUS, 6, 6),
+ [F_VCC_EXTID] = REG_FIELD(VCC_IDD_STATUS, 5, 5),
+ [F_VCC_IDRDET] = REG_FIELD(VCC_IDD_STATUS, 4, 4),
+ [F_VCC_INDO] = REG_FIELD(VCC_IDD_STATUS, 0, 3),
+ [F_VCC_UCDSWEN] = REG_FIELD(VCC_UCD_FCTRL_SET, 10, 10),
+ [F_VCC_RREF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 9, 9),
+ [F_VCC_DPPU_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 8, 8),
+ [F_VCC_DPREF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 7, 7),
+ [F_VCC_DMREF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 6, 6),
+ [F_VCC_DPDET_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 5, 5),
+ [F_VCC_DMDET_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 4, 4),
+ [F_VCC_DPSINK_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 3, 3),
+ [F_VCC_DMSINK_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 2, 2),
+ [F_VCC_DP_BUFF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 1, 1),
+ [F_VCC_DM_BUFF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 0, 0),
+ [F_VCC_EXTCLKENBL] = REG_FIELD(VCC_UCD_FCTRL_EN, 15, 15),
+ [F_VCC_PLSTESTEN] = REG_FIELD(VCC_UCD_FCTRL_EN, 14, 14),
+ [F_VCC_UCDSWEN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 10, 10),
+ [F_VCC_RREF_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 9, 9),
+ [F_VCC_DPPU_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 8, 8),
+ [F_VCC_DPREF_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 7, 7),
+ [F_VCC_DMREF_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 6, 6),
+ [F_VCC_DPDET_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 5, 5),
+ [F_VCC_DMDET_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 4, 4),
+ [F_VCC_DPSINK_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 3, 3),
+ [F_VCC_DMSINK_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 2, 2),
+ [F_VCC_DP_BUFF_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 1, 1),
+ [F_VCC_DM_BUFF_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 0, 0),
+
+ [F_VBUS_BCSRETRY] = REG_FIELD(VBUS_UCD_SET, 12, 12),
+ [F_VBUS_ADCRTRY] = REG_FIELD(VBUS_UCD_SET, 8, 8),
+ [F_VBUS_USBDETEN] = REG_FIELD(VBUS_UCD_SET, 7, 7),
+ [F_VBUS_IDRDETEN] = REG_FIELD(VBUS_UCD_SET, 6, 6),
+ [F_VBUS_ENUMRDY] = REG_FIELD(VBUS_UCD_SET, 5, 5),
+ [F_VBUS_ADCPOLEN] = REG_FIELD(VBUS_UCD_SET, 4, 4),
+ [F_VBUS_DCDMODE] = REG_FIELD(VBUS_UCD_SET, 3, 3),
+ [F_VBUS_USB_SW_EN] = REG_FIELD(VBUS_UCD_SET, 1, 1),
+ [F_VBUS_USB_SW] = REG_FIELD(VBUS_UCD_SET, 0, 0),
+ [F_VBUS_DCDFAIL] = REG_FIELD(VBUS_UCD_STATUS, 15, 15),
+ [F_VBUS_CHGPORT] = REG_FIELD(VBUS_UCD_STATUS, 12, 13),
+ [F_VBUS_PUPDET] = REG_FIELD(VBUS_UCD_STATUS, 11, 11),
+ [F_VBUS_VBUS_VLD] = REG_FIELD(VBUS_UCD_STATUS, 7, 7),
+ [F_VBUS_CHGDET] = REG_FIELD(VBUS_UCD_STATUS, 6, 6),
+ [F_VBUS_OTGDET] = REG_FIELD(VBUS_UCD_STATUS, 3, 3),
+ [F_VBUS_VBINOP] = REG_FIELD(VBUS_IDD_STATUS, 6, 6),
+ [F_VBUS_EXTID] = REG_FIELD(VBUS_IDD_STATUS, 5, 5),
+ [F_VBUS_IDRDET] = REG_FIELD(VBUS_IDD_STATUS, 4, 4),
+ [F_VBUS_INDO] = REG_FIELD(VBUS_IDD_STATUS, 0, 3),
+ [F_VBUS_UCDSWEN] = REG_FIELD(VCC_UCD_FCTRL_SET, 10, 10),
+ [F_VBUS_RREF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 9, 9),
+ [F_VBUS_DPPU_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 8, 8),
+ [F_VBUS_DPREF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 7, 7),
+ [F_VBUS_DMREF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 6, 6),
+ [F_VBUS_DPDET_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 5, 5),
+ [F_VBUS_DMDET_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 4, 4),
+ [F_VBUS_DPSINK_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 3, 3),
+ [F_VBUS_DMSINK_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 2, 2),
+ [F_VBUS_DP_BUFF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 1, 1),
+ [F_VBUS_DM_BUFF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 0, 0),
+
+ [F_VBUS_EXTCLKENBL] = REG_FIELD(VBUS_UCD_FCTRL_EN, 15, 15),
+ [F_VBUS_PLSTESTEN] = REG_FIELD(VBUS_UCD_FCTRL_EN, 14, 14),
+ [F_VBUS_UCDSWEN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 10, 10),
+ [F_VBUS_RREF_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 9, 9),
+ [F_VBUS_DPPU_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 8, 8),
+ [F_VBUS_DPREF_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 7, 7),
+ [F_VBUS_DMREF_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 6, 6),
+ [F_VBUS_DPDET_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 5, 5),
+ [F_VBUS_DMDET_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 4, 4),
+ [F_VBUS_DPSINK_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 3, 3),
+ [F_VBUS_DMSINK_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 2, 2),
+ [F_VBUS_DP_BUFF_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 1, 1),
+ [F_VBUS_DM_BUFF_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 0, 0),
+
+ [F_CHIP_ID] = REG_FIELD(CHIP_ID, 0, 15),
+ [F_CHIP_REV] = REG_FIELD(CHIP_REV, 0, 15),
+ [F_ONE_CELL_MODE] = REG_FIELD(IC_SET1, 11, 11),
+ [F_cell] = REG_FIELD(IC_SET1, 1, 1),
+ [F_VACP_AUTO_DISCHG] = REG_FIELD(IC_SET1, 9, 9),
+ [F_VACP_LOAD] = REG_FIELD(IC_SET1, 8, 8),
+ [F_ACOK_POL] = REG_FIELD(IC_SET1, 1, 1),
+ [F_ACOK_DISEN] = REG_FIELD(IC_SET1, 0, 0),
+ [F_DEBUG_SET1] = REG_FIELD(IC_SET2, 4, 8),
+ [F_DEBUG_SET0] = REG_FIELD(IC_SET2, 0, 0),
+ [F_MONRST_STATE] = REG_FIELD(SYSTEM_STATUS, 6, 6),
+ [F_ALMRST_STATE] = REG_FIELD(SYSTEM_STATUS, 5, 5),
+ [F_CHGRST_STATE] = REG_FIELD(SYSTEM_STATUS, 4, 4),
+ [F_OTPLD_STATE] = REG_FIELD(SYSTEM_STATUS, 1, 1),
+ [F_ALLRST_STATE] = REG_FIELD(SYSTEM_STATUS, 0, 0),
+ [F_PROTECT_SET] = REG_FIELD(PROTECT_SET, 0, 15),
+ [F_MAP_SET] = REG_FIELD(MAP_SET, 0, 15),
+ [F_ADCINTERVAL] = REG_FIELD(VM_CTRL_SET, 14, 15),
+ [F_ADCMOD] = REG_FIELD(VM_CTRL_SET, 12, 13),
+ [F_ADCTMOD] = REG_FIELD(VM_CTRL_SET, 10, 11),
+ [F_EXTIADPEN] = REG_FIELD(VM_CTRL_SET, 9, 9),
+ [F_VSYSENB] = REG_FIELD(VM_CTRL_SET, 8, 8),
+ [F_VCCENB] = REG_FIELD(VM_CTRL_SET, 7, 7),
+ [F_VBUSENB] = REG_FIELD(VM_CTRL_SET, 6, 6),
+ [F_VACPENB] = REG_FIELD(VM_CTRL_SET, 5, 5),
+ [F_IACPENB] = REG_FIELD(VM_CTRL_SET, 4, 4),
+ [F_THERMENB] = REG_FIELD(VM_CTRL_SET, 3, 3),
+ [F_VBATENB] = REG_FIELD(VM_CTRL_SET, 2, 2),
+ [F_IBATMENB] = REG_FIELD(VM_CTRL_SET, 1, 1),
+ [F_IBATPENB] = REG_FIELD(VM_CTRL_SET, 0, 0),
+ [F_TMPTHR1B] = REG_FIELD(THERM_WINDOW_SET1, 8, 15),
+ [F_TMPTHR1A] = REG_FIELD(THERM_WINDOW_SET1, 0, 7),
+ [F_TMPTHR2B] = REG_FIELD(THERM_WINDOW_SET2, 8, 15),
+ [F_TMPTHR2A] = REG_FIELD(THERM_WINDOW_SET2, 0, 7),
+ [F_TMPTHR3B] = REG_FIELD(THERM_WINDOW_SET3, 8, 15),
+ [F_TMPTHR3A] = REG_FIELD(THERM_WINDOW_SET3, 0, 7),
+ [F_TMPTHR4B] = REG_FIELD(THERM_WINDOW_SET4, 8, 15),
+ [F_TMPTHR4A] = REG_FIELD(THERM_WINDOW_SET4, 0, 7),
+ [F_TMPTHR5B] = REG_FIELD(THERM_WINDOW_SET5, 8, 15),
+ [F_TMPTHR5A] = REG_FIELD(THERM_WINDOW_SET5, 0, 7),
+ [F_IBATP_TH_SET] = REG_FIELD(IBATP_TH_SET, 0, 14),
+ [F_IBATM_TH_SET] = REG_FIELD(IBATM_TH_SET, 0, 14),
+ [F_VBAT_TH_SET] = REG_FIELD(VBAT_TH_SET, 0, 14),
+ [F_THERM_TH_SET] = REG_FIELD(THERM_TH_SET, 0, 7),
+ [F_IACP_TH_SET] = REG_FIELD(IACP_TH_SET, 0, 14),
+ [F_VACP_TH_SET] = REG_FIELD(VACP_TH_SET, 0, 14),
+ [F_VBUS_TH_SET] = REG_FIELD(VBUS_TH_SET, 0, 14),
+ [F_VCC_TH_SET] = REG_FIELD(VCC_TH_SET, 0, 14),
+ [F_VSYS_TH_SET] = REG_FIELD(VSYS_TH_SET, 0, 14),
+ [F_EXTIADP_TH_SET] = REG_FIELD(EXTIADP_TH_SET, 0, 11),
+ [F_IBATP_VAL] = REG_FIELD(IBATP_VAL, 0, 14),
+ [F_IBATP_AVE_VAL] = REG_FIELD(IBATP_AVE_VAL, 0, 14),
+ [F_IBATM_VAL] = REG_FIELD(IBATM_VAL, 0, 14),
+ [F_IBATM_AVE_VAL] = REG_FIELD(IBATM_AVE_VAL, 0, 14),
+ [F_VBAT_VAL] = REG_FIELD(VBAT_VAL, 0, 14),
+ [F_VBAT_AVE_VAL] = REG_FIELD(VBAT_AVE_VAL, 0, 14),
+ [F_THERM_VAL] = REG_FIELD(THERM_VAL, 0, 7),
+ [F_VTH_VAL] = REG_FIELD(VTH_VAL, 0, 11),
+ [F_IACP_VAL] = REG_FIELD(IACP_VAL, 0, 14),
+ [F_IACP_AVE_VAL] = REG_FIELD(IACP_AVE_VAL, 0, 14),
+ [F_VACP_VAL] = REG_FIELD(VACP_VAL, 0, 14),
+ [F_VACP_AVE_VAL] = REG_FIELD(VACP_AVE_VAL, 0, 14),
+ [F_VBUS_VAL] = REG_FIELD(VBUS_VAL, 0, 14),
+ [F_VBUS_AVE_VAL] = REG_FIELD(VBUS_AVE_VAL, 0, 14),
+ [F_VCC_VAL] = REG_FIELD(VCC_VAL, 0, 14),
+ [F_VCC_AVE_VAL] = REG_FIELD(VCC_AVE_VAL, 0, 14),
+ [F_VSYS_VAL] = REG_FIELD(VSYS_VAL, 0, 14),
+ [F_VSYS_AVE_VAL] = REG_FIELD(VSYS_AVE_VAL, 0, 14),
+ [F_EXTIADP_VAL] = REG_FIELD(EXTIADP_VAL, 0, 11),
+ [F_EXTIADP_AVE_VAL] = REG_FIELD(EXTIADP_AVE_VAL, 0, 11),
+ [F_VACPCLPS_TH_SET] = REG_FIELD(VACPCLPS_TH_SET, 7, 14),
+ [F_INT7_SET] = REG_FIELD(INT7_SET, 0, 15),
+ [F_INT6_SET] = REG_FIELD(INT6_SET, 0, 13),
+ [F_INT5_SET] = REG_FIELD(INT5_SET, 0, 13),
+ [F_INT4_SET] = REG_FIELD(INT4_SET, 0, 9),
+ [F_INT3_SET] = REG_FIELD(INT3_SET, 0, 15),
+ [F_INT2_SET] = REG_FIELD(INT2_SET, 0, 15),
+ [F_INT1_SET] = REG_FIELD(INT1_SET, 0, 15),
+ [F_INT0_SET] = REG_FIELD(INT0_SET, 0, 7),
+ [F_VBUS_RBUV_DET] = REG_FIELD(INT1_SET, 15, 15),
+ [F_VBUS_RBUV_RES] = REG_FIELD(INT1_SET, 14, 14),
+ [F_VBUS_TH_DET] = REG_FIELD(INT1_SET, 9, 9),
+ [F_VBUS_TH_RES] = REG_FIELD(INT1_SET, 8, 8),
+ [F_VBUS_IIN_MOD] = REG_FIELD(INT1_SET, 6, 6),
+ [F_VBUS_OV_DET] = REG_FIELD(INT1_SET, 5, 5),
+ [F_VBUS_OV_RES] = REG_FIELD(INT1_SET, 4, 4),
+ [F_VBUS_CLPS_DET] = REG_FIELD(INT1_SET, 3, 3),
+ [F_VBUS_CLPS] = REG_FIELD(INT1_SET, 2, 2),
+ [F_VBUS_DET] = REG_FIELD(INT1_SET, 1, 1),
+ [F_VBUS_RES] = REG_FIELD(INT1_SET, 0, 0),
+ [F_VCC_RBUV_DET] = REG_FIELD(INT2_SET, 15, 15),
+ [F_VCC_RBUV_RES] = REG_FIELD(INT2_SET, 14, 14),
+ [F_VCC_TH_DET] = REG_FIELD(INT2_SET, 9, 9),
+ [F_VCC_TH_RES] = REG_FIELD(INT2_SET, 8, 8),
+ [F_VCC_IIN_MOD] = REG_FIELD(INT2_SET, 6, 6),
+ [F_VCC_OVP_DET] = REG_FIELD(INT2_SET, 5, 5),
+ [F_VCC_OVP_RES] = REG_FIELD(INT2_SET, 4, 4),
+ [F_VCC_CLPS_DET] = REG_FIELD(INT2_SET, 3, 3),
+ [F_VCC_CLPS_RES] = REG_FIELD(INT2_SET, 2, 2),
+ [F_VCC_DET] = REG_FIELD(INT2_SET, 1, 1),
+ [F_VCC_RES] = REG_FIELD(INT2_SET, 0, 0),
+ [F_TH_DET] = REG_FIELD(INT3_SET, 15, 15),
+ [F_TH_RMV] = REG_FIELD(INT3_SET, 14, 14),
+ [F_TMP_OUT_DET] = REG_FIELD(INT3_SET, 11, 11),
+ [F_TMP_OUT_RES] = REG_FIELD(INT3_SET, 10, 10),
+ [F_VBAT_TH_DET] = REG_FIELD(INT3_SET, 9, 9),
+ [F_VBAT_TH_RES] = REG_FIELD(INT3_SET, 8, 8),
+ [F_IBAT_SHORT_DET] = REG_FIELD(INT3_SET, 7, 7),
+ [F_IBAT_SHORT_RES] = REG_FIELD(INT3_SET, 6, 6),
+ [F_VBAT_OV_DET] = REG_FIELD(INT3_SET, 5, 5),
+ [F_VBAT_OV_RES] = REG_FIELD(INT3_SET, 4, 4),
+ [F_BAT_ASSIST_DET] = REG_FIELD(INT3_SET, 3, 3),
+ [F_BAT_ASSIST_RES] = REG_FIELD(INT3_SET, 2, 2),
+ [F_VSYS_TH_DET] = REG_FIELD(INT4_SET, 9, 9),
+ [F_VSYS_TH_RES] = REG_FIELD(INT4_SET, 8, 8),
+ [F_VSYS_OV_DET] = REG_FIELD(INT4_SET, 5, 5),
+ [F_VSYS_OV_RES] = REG_FIELD(INT4_SET, 4, 4),
+ [F_VSYS_SHT_DET] = REG_FIELD(INT4_SET, 3, 3),
+ [F_VSYS_SHT_RES] = REG_FIELD(INT4_SET, 2, 2),
+ [F_VSYS_UV_DET] = REG_FIELD(INT4_SET, 1, 1),
+ [F_VSYS_UV_RES] = REG_FIELD(INT4_SET, 0, 0),
+ [F_OTP_LOAD_DONE] = REG_FIELD(INT5_SET, 13, 13),
+ [F_PWR_ON] = REG_FIELD(INT5_SET, 12, 12),
+ [F_EXTIADP_TRNS] = REG_FIELD(INT5_SET, 11, 11),
+ [F_EXTIADP_TH_DET] = REG_FIELD(INT5_SET, 9, 9),
+ [F_EXIADP_TH_RES] = REG_FIELD(INT5_SET, 8, 8),
+ [F_BAT_MNT_DET] = REG_FIELD(INT5_SET, 7, 7),
+ [F_BAT_MNT_RES] = REG_FIELD(INT5_SET, 6, 6),
+ [F_TSD_DET] = REG_FIELD(INT5_SET, 5, 5),
+ [F_TSD_RES] = REG_FIELD(INT5_SET, 4, 4),
+ [F_CHGWDT_EXP] = REG_FIELD(INT5_SET, 3, 3),
+ [F_THERMWDT_EXP] = REG_FIELD(INT5_SET, 2, 2),
+ [F_TMP_TRNS] = REG_FIELD(INT5_SET, 1, 1),
+ [F_CHG_TRNS] = REG_FIELD(INT5_SET, 0, 0),
+ [F_VBUS_UCD_PORT_DET] = REG_FIELD(INT6_SET, 13, 13),
+ [F_VBUS_UCD_UCHG_DET] = REG_FIELD(INT6_SET, 12, 12),
+ [F_VBUS_UCD_URID_RMV] = REG_FIELD(INT6_SET, 11, 11),
+ [F_VBUS_UCD_OTG_DET] = REG_FIELD(INT6_SET, 10, 10),
+ [F_VBUS_UCD_URID_MOD] = REG_FIELD(INT6_SET, 8, 8),
+ [F_VCC_UCD_PORT_DET] = REG_FIELD(INT6_SET, 5, 5),
+ [F_VCC_UCD_UCHG_DET] = REG_FIELD(INT6_SET, 4, 4),
+ [F_VCC_UCD_URID_RMV] = REG_FIELD(INT6_SET, 3, 3),
+ [F_VCC_UCD_OTG_DET] = REG_FIELD(INT6_SET, 2, 2),
+ [F_VCC_UCD_URID_MOD] = REG_FIELD(INT6_SET, 0, 0),
+ [F_PROCHOT_DET] = REG_FIELD(INT7_SET, 15, 15),
+ [F_PROCHOT_RES] = REG_FIELD(INT7_SET, 14, 14),
+ [F_VACP_DET] = REG_FIELD(INT7_SET, 11, 11),
+ [F_VACP_RES] = REG_FIELD(INT7_SET, 10, 10),
+ [F_VACP_TH_DET] = REG_FIELD(INT7_SET, 9, 9),
+ [F_VACP_TH_RES] = REG_FIELD(INT7_SET, 8, 8),
+ [F_IACP_TH_DET] = REG_FIELD(INT7_SET, 7, 7),
+ [F_IACP_THE_RES] = REG_FIELD(INT7_SET, 6, 6),
+ [F_THERM_TH_DET] = REG_FIELD(INT7_SET, 5, 5),
+ [F_THERM_TH_RES] = REG_FIELD(INT7_SET, 4, 4),
+ [F_IBATM_TH_DET] = REG_FIELD(INT7_SET, 3, 3),
+ [F_IBATM_TH_RES] = REG_FIELD(INT7_SET, 2, 2),
+ [F_IBATP_TH_DET] = REG_FIELD(INT7_SET, 1, 1),
+ [F_IBATP_TH_RES] = REG_FIELD(INT7_SET, 0, 0),
+ [F_INT7_STATUS] = REG_FIELD(INT7_STATUS, 0, 15),
+ [F_INT6_STATUS] = REG_FIELD(INT6_STATUS, 0, 13),
+ [F_INT5_STATUS] = REG_FIELD(INT5_STATUS, 0, 13),
+ [F_INT4_STATUS] = REG_FIELD(INT4_STATUS, 0, 9),
+ [F_INT3_STATUS] = REG_FIELD(INT3_STATUS, 0, 15),
+ [F_INT2_STATUS] = REG_FIELD(INT2_STATUS, 0, 15),
+ [F_INT1_STATUS] = REG_FIELD(INT1_STATUS, 0, 15),
+ [F_INT0_STATUS] = REG_FIELD(INT0_STATUS, 0, 7),
+ [F_ILIM_DECREASE] = REG_FIELD(OTPREG0, 0, 15),
+ [F_RESERVE_OTPREG1] = REG_FIELD(OTPREG1, 0, 15),
+ [F_POWER_SAVE_MODE] = REG_FIELD(SMBREG, 0, 15),
+ [F_DEBUG_MODE_SET] = REG_FIELD(DEBUG_MODE_SET, 0, 15),
+ [F_DEBUG0x14] = REG_FIELD(DEBUG0x14, 0, 15),
+ [F_DEBUG0x1A] = REG_FIELD(DEBUG0x1A, 0, 15),
+};
+
+/* CHGSTM_STATEs */
+#define CHGSTM_SUSPEND 0x00
+#define CHGSTM_TRICKLE_CHARGE 0x01
+#define CHGSTM_PRE_CHARGE 0x02
+#define CHGSTM_FAST_CHARGE 0x03
+#define CHGSTM_TOP_OFF 0x04
+#define CHGSTM_DONE 0x05
+#define CHGSTM_OTG 0x08
+#define CHGSTM_OTG_DONE 0x09
+#define CHGSTM_TEMPERATURE_ERROR_1 0x10
+#define CHGSTM_TEMPERATURE_ERROR_2 0x11
+#define CHGSTM_TEMPERATURE_ERROR_3 0x12
+#define CHGSTM_TEMPERATURE_ERROR_4 0x13
+#define CHGSTM_TEMPERATURE_ERROR_5 0x14
+#define CHGSTM_TEMPERATURE_ERROR_6 0x15
+#define CHGSTM_TEMPERATURE_ERROR_7 0x18
+#define CHGSTM_THERMAL_SHUT_DOWN_1 0x20
+#define CHGSTM_THERMAL_SHUT_DOWN_2 0x21
+#define CHGSTM_THERMAL_SHUT_DOWN_3 0x22
+#define CHGSTM_THERMAL_SHUT_DOWN_4 0x23
+#define CHGSTM_THERMAL_SHUT_DOWN_5 0x24
+#define CHGSTM_THERMAL_SHUT_DOWN_6 0x25
+#define CHGSTM_THERMAL_SHUT_DOWN_7 0x28
+#define CHGSTM_BATTERY_ERROR 0x40
+
+/* VBAT_VSYS_STATUS */
+#define STATUS_VSYS_OV BIT(15)
+#define STATUS_VSYS_SSD BIT(14)
+#define STATUS_VSYS_SCP BIT(13)
+#define STATUS_VSYS_UVN BIT(12)
+#define STATUS_IBAT_SHORT BIT(6)
+#define STATUS_VBAT_OV BIT(3)
+#define STATUS_DEAD_BAT BIT(0)
+
+/* VBUS_VCC_STATUS */
+#define STATUS_VACP_DET BIT(12)
+#define STATUS_VCC_OVP BIT(11)
+#define STATUS_ILIM_VCC_MOD BIT(10)
+#define STATUS_VCC_CLPS BIT(9)
+#define STATUS_VCC_DET BIT(8)
+#define STATUS_VBUS_OVP BIT(3)
+#define STATUS_ILIM_VBUS_MOD BIT(2)
+#define STATUS_VBUS_CLPS BIT(1)
+#define STATUS_VBUS_DET BIT(0)
+
+/* Interrupt set/status definitions */
+
+/* INT 0 */
+#define INT0_INT7_STATUS BIT(7)
+#define INT0_INT6_STATUS BIT(6)
+#define INT0_INT5_STATUS BIT(5)
+#define INT0_INT4_STATUS BIT(4)
+#define INT0_INT3_STATUS BIT(3)
+#define INT0_INT2_STATUS BIT(2)
+#define INT0_INT1_STATUS BIT(1)
+#define INT0_INT0_STATUS BIT(0)
+#define INT0_ALL 0xff
+
+/* INT 1 */
+#define VBUS_RBUV_DET BIT(15)
+#define VBUS_RBUV_RES BIT(14)
+#define VBUS_TH_DET BIT(9)
+#define VBUS_TH_RES BIT(8)
+#define VBUS_IIN_MOD BIT(6)
+#define VBUS_OV_DET BIT(5)
+#define VBUS_OV_RES BIT(4)
+#define VBUS_CLPS_DET BIT(3)
+#define VBUS_CLPS BIT(2)
+#define VBUS_DET BIT(1)
+#define VBUS_RES BIT(0)
+#define INT1_ALL (VBUS_RBUV_DET|\
+ VBUS_RBUV_RES|\
+ VBUS_TH_DET |\
+ VBUS_TH_RES |\
+ VBUS_IIN_MOD|\
+ VBUS_OV_DET |\
+ VBUS_OV_RES |\
+ VBUS_CLPS_DET |\
+ VBUS_CLPS |\
+ VBUS_DET |\
+ VBUS_RES)
+
+/* INT 2 */
+#define VCC_RBUV_DET BIT(15)
+#define VCC_RBUV_RES BIT(14)
+#define VCC_TH_DET BIT(9)
+#define VCC_TH_RES BIT(8)
+#define VCC_IIN_MOD BIT(6)
+#define VCC_OVP_DET BIT(5)
+#define VCC_OVP_RES BIT(4)
+#define VCC_CLPS_DET BIT(3)
+#define VCC_CLPS_RES BIT(2)
+#define VCC_DET BIT(1)
+#define VCC_RES BIT(0)
+#define INT2_ALL (VCC_RBUV_DET |\
+ VCC_RBUV_RES |\
+ VCC_TH_DET |\
+ VCC_TH_RES |\
+ VCC_IIN_MOD |\
+ VCC_OVP_DET |\
+ VCC_OVP_RES |\
+ VCC_CLPS_DET |\
+ VCC_CLPS_RES |\
+ VCC_DET |\
+ VCC_RES)
+/* INT 3 */
+#define TH_DET BIT(15)
+#define TH_RMV BIT(14)
+#define TMP_OUT_DET BIT(11)
+#define TMP_OUT_RES BIT(10)
+#define VBAT_TH_DET BIT(9)
+#define VBAT_TH_RES BIT(8)
+#define IBAT_SHORT_DET BIT(7)
+#define IBAT_SHORT_RES BIT(6)
+#define VBAT_OV_DET BIT(5)
+#define VBAT_OV_RES BIT(4)
+#define BAT_ASSIST_DET BIT(3)
+#define BAT_ASSIST_RES BIT(2)
+#define INT3_ALL (TH_DET |\
+ TH_RMV |\
+ TMP_OUT_DET |\
+ TMP_OUT_RES |\
+ VBAT_TH_DET |\
+ VBAT_TH_RES |\
+ IBAT_SHORT_DET |\
+ IBAT_SHORT_RES |\
+ VBAT_OV_DET |\
+ VBAT_OV_RES |\
+ BAT_ASSIST_DET |\
+ BAT_ASSIST_RES)
+
+/* INT 4 */
+#define VSYS_TH_DET BIT(9)
+#define VSYS_TH_RES BIT(8)
+#define VSYS_OV_DET BIT(5)
+#define VSYS_OV_RES BIT(4)
+#define VSYS_SHT_DET BIT(3)
+#define VSYS_SHT_RES BIT(2)
+#define VSYS_UV_DET BIT(1)
+#define VSYS_UV_RES BIT(0)
+#define INT4_ALL (VSYS_TH_DET |\
+ VSYS_TH_RES |\
+ VSYS_OV_DET |\
+ VSYS_OV_RES |\
+ VSYS_SHT_DET |\
+ VSYS_SHT_RES |\
+ VSYS_UV_DET |\
+ VSYS_UV_RES)
+
+/* INT 5*/
+#define OTP_LOAD_DONE BIT(13)
+#define PWR_ON BIT(12)
+#define EXTIADP_TRNS BIT(11)
+#define EXTIADP_TH_DET BIT(9)
+#define EXIADP_TH_RES BIT(8)
+#define BAT_MNT_DET BIT(7)
+#define BAT_MNT_RES BIT(6)
+#define TSD_DET BIT(5)
+#define TSD_RES BIT(4)
+#define CHGWDT_EXP BIT(3)
+#define THERMWDT_EXP BIT(2)
+#define TMP_TRNS BIT(1)
+#define CHG_TRNS BIT(0)
+#define INT5_ALL (OTP_LOAD_DONE |\
+ PWR_ON |\
+ EXTIADP_TRNS |\
+ EXTIADP_TH_DET |\
+ EXIADP_TH_RES |\
+ BAT_MNT_DET |\
+ BAT_MNT_RES |\
+ TSD_DET |\
+ TSD_RES |\
+ CHGWDT_EXP |\
+ THERMWDT_EXP |\
+ TMP_TRNS |\
+ CHG_TRNS)
+
+/* INT 6*/
+#define VBUS_UCD_PORT_DET BIT(13)
+#define VBUS_UCD_UCHG_DET BIT(12)
+#define VBUS_UCD_URID_RMV BIT(11)
+#define VBUS_UCD_OTG_DET BIT(10)
+#define VBUS_UCD_URID_MOD BIT(8)
+#define VCC_UCD_PORT_DET BIT(5)
+#define VCC_UCD_UCHG_DET BIT(4)
+#define VCC_UCD_URID_RMV BIT(3)
+#define VCC_UCD_OTG_DET BIT(2)
+#define VCC_UCD_URID_MOD BIT(0)
+#define INT6_ALL (VBUS_UCD_PORT_DET |\
+ VBUS_UCD_UCHG_DET |\
+ VBUS_UCD_URID_RMV |\
+ VBUS_UCD_OTG_DET |\
+ VBUS_UCD_URID_MOD |\
+ VCC_UCD_PORT_DET |\
+ VCC_UCD_UCHG_DET |\
+ VCC_UCD_URID_RMV |\
+ VCC_UCD_OTG_DET |\
+ VCC_UCD_URID_MOD)
+
+/* INT 7 */
+#define PROCHOT_DET BIT(15)
+#define PROCHOT_RES BIT(14)
+#define VACP_DET BIT(11)
+#define VACP_RES BIT(10)
+#define VACP_TH_DET BIT(9)
+#define VACP_TH_RES BIT(8)
+#define IACP_TH_DET BIT(7)
+#define IACP_THE_RES BIT(6)
+#define THERM_TH_DET BIT(5)
+#define THERM_TH_RES BIT(4)
+#define IBATM_TH_DET BIT(3)
+#define IBATM_TH_RES BIT(2)
+#define IBATP_TH_DET BIT(1)
+#define IBATP_TH_RES BIT(0)
+#define INT7_ALL (PROCHOT_DET |\
+ PROCHOT_RES |\
+ VACP_DET |\
+ VACP_RES |\
+ VACP_TH_DET |\
+ VACP_TH_RES |\
+ IACP_TH_DET |\
+ IACP_THE_RES |\
+ THERM_TH_DET |\
+ THERM_TH_RES |\
+ IBATM_TH_DET |\
+ IBATM_TH_RES |\
+ IBATP_TH_DET |\
+ IBATP_TH_RES)
+
+/* SYSTEM_CTRL_SET*/
+#define MONRST BIT(6)
+#define ALMRST BIT(5)
+#define CHGRST BIT(4)
+#define OTPLD BIT(1)
+#define ALLRST BIT(0)
+
+/* F_BATTEMP */
+#define ROOM 0x0
+#define HOT1 0x1
+#define HOT2 0x2
+#define HOT3 0x3
+#define COLD1 0x4
+#define COLD2 0x5
+#define TEMP_DIS 0x6
+#define BATT_OPEN 0x7
+
+#endif
diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
index 453d6332d43a..4540e913057f 100644
--- a/drivers/power/supply/bq24190_charger.c
+++ b/drivers/power/supply/bq24190_charger.c
@@ -673,7 +673,7 @@ static int bq24190_register_reset(struct bq24190_dev_info *bdi)
* { .type = "bq24190", .addr = 0x6b, .properties = pe, .irq = irq };
* struct i2c_adapter ad = { ... };
* i2c_add_adapter(&ad);
- * i2c_new_device(&ad, &bi);
+ * i2c_new_client_device(&ad, &bi);
*/
if (device_property_read_bool(bdi->dev, "disable-reset"))
return 0;
diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c
index aebd1253dbc9..77150667e36b 100644
--- a/drivers/power/supply/bq25890_charger.c
+++ b/drivers/power/supply/bq25890_charger.c
@@ -32,6 +32,13 @@ enum bq25890_chip_version {
BQ25896,
};
+static const char *const bq25890_chip_name[] = {
+ "BQ25890",
+ "BQ25892",
+ "BQ25895",
+ "BQ25896",
+};
+
enum bq25890_fields {
F_EN_HIZ, F_EN_ILIM, F_IILIM, /* Reg00 */
F_BHOT, F_BCOLD, F_VINDPM_OFS, /* Reg01 */
@@ -119,6 +126,7 @@ static const struct regmap_access_table bq25890_writeable_regs = {
static const struct regmap_range bq25890_volatile_reg_ranges[] = {
regmap_reg_range(0x00, 0x00),
+ regmap_reg_range(0x02, 0x02),
regmap_reg_range(0x09, 0x09),
regmap_reg_range(0x0b, 0x14),
};
@@ -246,6 +254,7 @@ enum bq25890_table_ids {
/* range tables */
TBL_ICHG,
TBL_ITERM,
+ TBL_IILIM,
TBL_VREG,
TBL_BOOSTV,
TBL_SYSVMIN,
@@ -286,6 +295,7 @@ static const union {
/* TODO: BQ25896 has max ICHG 3008 mA */
[TBL_ICHG] = { .rt = {0, 5056000, 64000} }, /* uA */
[TBL_ITERM] = { .rt = {64000, 1024000, 64000} }, /* uA */
+ [TBL_IILIM] = { .rt = {50000, 3200000, 50000} }, /* uA */
[TBL_VREG] = { .rt = {3840000, 4608000, 16000} }, /* uV */
[TBL_BOOSTV] = { .rt = {4550000, 5510000, 64000} }, /* uV */
[TBL_SYSVMIN] = { .rt = {3000000, 3700000, 100000} }, /* uV */
@@ -367,18 +377,42 @@ enum bq25890_chrg_fault {
CHRG_FAULT_TIMER_EXPIRED,
};
+static bool bq25890_is_adc_property(enum power_supply_property psp)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ return true;
+
+ default:
+ return false;
+ }
+}
+
+static irqreturn_t __bq25890_handle_irq(struct bq25890_device *bq);
+
static int bq25890_power_supply_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
- int ret;
struct bq25890_device *bq = power_supply_get_drvdata(psy);
struct bq25890_state state;
+ bool do_adc_conv;
+ int ret;
mutex_lock(&bq->lock);
+ /* update state in case we lost an interrupt */
+ __bq25890_handle_irq(bq);
state = bq->state;
+ do_adc_conv = !state.online && bq25890_is_adc_property(psp);
+ if (do_adc_conv)
+ bq25890_field_write(bq, F_CONV_START, 1);
mutex_unlock(&bq->lock);
+ if (do_adc_conv)
+ regmap_field_read_poll_timeout(bq->rmap_fields[F_CONV_START],
+ ret, !ret, 25000, 1000000);
+
switch (psp) {
case POWER_SUPPLY_PROP_STATUS:
if (!state.online)
@@ -395,22 +429,24 @@ static int bq25890_power_supply_get_property(struct power_supply *psy,
break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ if (!state.online || state.chrg_status == STATUS_NOT_CHARGING ||
+ state.chrg_status == STATUS_TERMINATION_DONE)
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ else if (state.chrg_status == STATUS_PRE_CHARGING)
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_STANDARD;
+ else if (state.chrg_status == STATUS_FAST_CHARGING)
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ else /* unreachable */
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+ break;
+
case POWER_SUPPLY_PROP_MANUFACTURER:
val->strval = BQ25890_MANUFACTURER;
break;
case POWER_SUPPLY_PROP_MODEL_NAME:
- if (bq->chip_version == BQ25890)
- val->strval = "BQ25890";
- else if (bq->chip_version == BQ25892)
- val->strval = "BQ25892";
- else if (bq->chip_version == BQ25895)
- val->strval = "BQ25895";
- else if (bq->chip_version == BQ25896)
- val->strval = "BQ25896";
- else
- val->strval = "UNKNOWN";
-
+ val->strval = bq25890_chip_name[bq->chip_version];
break;
case POWER_SUPPLY_PROP_ONLINE:
@@ -430,15 +466,6 @@ static int bq25890_power_supply_get_property(struct power_supply *psy,
val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
break;
- case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
- ret = bq25890_field_read(bq, F_ICHGR); /* read measured value */
- if (ret < 0)
- return ret;
-
- /* converted_val = ADC_val * 50mA (table 10.3.19) */
- val->intval = ret * 50000;
- break;
-
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
val->intval = bq25890_find_val(bq->init_data.ichg, TBL_ICHG);
break;
@@ -461,10 +488,22 @@ static int bq25890_power_supply_get_property(struct power_supply *psy,
val->intval = bq25890_find_val(bq->init_data.vreg, TBL_VREG);
break;
+ case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+ val->intval = bq25890_find_val(bq->init_data.iprechg, TBL_ITERM);
+ break;
+
case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
val->intval = bq25890_find_val(bq->init_data.iterm, TBL_ITERM);
break;
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = bq25890_field_read(bq, F_IILIM);
+ if (ret < 0)
+ return ret;
+
+ val->intval = bq25890_find_val(ret, TBL_IILIM);
+ break;
+
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
ret = bq25890_field_read(bq, F_SYSV); /* read measured value */
if (ret < 0)
@@ -474,6 +513,15 @@ static int bq25890_power_supply_get_property(struct power_supply *psy,
val->intval = 2304000 + ret * 20000;
break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = bq25890_field_read(bq, F_ICHGR); /* read measured value */
+ if (ret < 0)
+ return ret;
+
+ /* converted_val = ADC_val * 50mA (table 10.3.19) */
+ val->intval = ret * -50000;
+ break;
+
default:
return -EINVAL;
}
@@ -513,74 +561,50 @@ static int bq25890_get_chip_state(struct bq25890_device *bq,
return 0;
}
-static bool bq25890_state_changed(struct bq25890_device *bq,
- struct bq25890_state *new_state)
-{
- struct bq25890_state old_state;
-
- mutex_lock(&bq->lock);
- old_state = bq->state;
- mutex_unlock(&bq->lock);
-
- return (old_state.chrg_status != new_state->chrg_status ||
- old_state.chrg_fault != new_state->chrg_fault ||
- old_state.online != new_state->online ||
- old_state.bat_fault != new_state->bat_fault ||
- old_state.boost_fault != new_state->boost_fault ||
- old_state.vsys_status != new_state->vsys_status);
-}
-
-static void bq25890_handle_state_change(struct bq25890_device *bq,
- struct bq25890_state *new_state)
+static irqreturn_t __bq25890_handle_irq(struct bq25890_device *bq)
{
+ struct bq25890_state new_state;
int ret;
- struct bq25890_state old_state;
- mutex_lock(&bq->lock);
- old_state = bq->state;
- mutex_unlock(&bq->lock);
+ ret = bq25890_get_chip_state(bq, &new_state);
+ if (ret < 0)
+ return IRQ_NONE;
+
+ if (!memcmp(&bq->state, &new_state, sizeof(new_state)))
+ return IRQ_NONE;
- if (!new_state->online) { /* power removed */
+ if (!new_state.online && bq->state.online) { /* power removed */
/* disable ADC */
ret = bq25890_field_write(bq, F_CONV_START, 0);
if (ret < 0)
goto error;
- } else if (!old_state.online) { /* power inserted */
+ } else if (new_state.online && !bq->state.online) { /* power inserted */
/* enable ADC, to have control of charge current/voltage */
ret = bq25890_field_write(bq, F_CONV_START, 1);
if (ret < 0)
goto error;
}
- return;
+ bq->state = new_state;
+ power_supply_changed(bq->charger);
+ return IRQ_HANDLED;
error:
- dev_err(bq->dev, "Error communicating with the chip.\n");
+ dev_err(bq->dev, "Error communicating with the chip: %pe\n",
+ ERR_PTR(ret));
+ return IRQ_HANDLED;
}
static irqreturn_t bq25890_irq_handler_thread(int irq, void *private)
{
struct bq25890_device *bq = private;
- int ret;
- struct bq25890_state state;
-
- ret = bq25890_get_chip_state(bq, &state);
- if (ret < 0)
- goto handled;
-
- if (!bq25890_state_changed(bq, &state))
- goto handled;
-
- bq25890_handle_state_change(bq, &state);
+ irqreturn_t ret;
mutex_lock(&bq->lock);
- bq->state = state;
+ ret = __bq25890_handle_irq(bq);
mutex_unlock(&bq->lock);
- power_supply_changed(bq->charger);
-
-handled:
- return IRQ_HANDLED;
+ return ret;
}
static int bq25890_chip_reset(struct bq25890_device *bq)
@@ -610,7 +634,6 @@ static int bq25890_hw_init(struct bq25890_device *bq)
{
int ret;
int i;
- struct bq25890_state state;
const struct {
enum bq25890_fields id;
@@ -651,38 +674,37 @@ static int bq25890_hw_init(struct bq25890_device *bq)
}
}
- /* Configure ADC for continuous conversions. This does not enable it. */
- ret = bq25890_field_write(bq, F_CONV_RATE, 1);
+ /* Configure ADC for continuous conversions when charging */
+ ret = bq25890_field_write(bq, F_CONV_RATE, !!bq->state.online);
if (ret < 0) {
dev_dbg(bq->dev, "Config ADC failed %d\n", ret);
return ret;
}
- ret = bq25890_get_chip_state(bq, &state);
+ ret = bq25890_get_chip_state(bq, &bq->state);
if (ret < 0) {
dev_dbg(bq->dev, "Get state failed %d\n", ret);
return ret;
}
- mutex_lock(&bq->lock);
- bq->state = state;
- mutex_unlock(&bq->lock);
-
return 0;
}
-static enum power_supply_property bq25890_power_supply_props[] = {
+static const enum power_supply_property bq25890_power_supply_props[] = {
POWER_SUPPLY_PROP_MANUFACTURER,
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_HEALTH,
- POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+ POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
};
static char *bq25890_charger_supplied_to[] = {
@@ -881,17 +903,11 @@ static int bq25890_fw_probe(struct bq25890_device *bq)
static int bq25890_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- struct i2c_adapter *adapter = client->adapter;
struct device *dev = &client->dev;
struct bq25890_device *bq;
int ret;
int i;
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
- dev_err(dev, "No support for SMBUS_BYTE_DATA\n");
- return -ENODEV;
- }
-
bq = devm_kzalloc(dev, sizeof(*bq), GFP_KERNEL);
if (!bq)
return -ENOMEM;
@@ -1004,34 +1020,34 @@ static int bq25890_suspend(struct device *dev)
* If charger is removed, while in suspend, make sure ADC is diabled
* since it consumes slightly more power.
*/
- return bq25890_field_write(bq, F_CONV_START, 0);
+ return bq25890_field_write(bq, F_CONV_RATE, 0);
}
static int bq25890_resume(struct device *dev)
{
int ret;
- struct bq25890_state state;
struct bq25890_device *bq = dev_get_drvdata(dev);
- ret = bq25890_get_chip_state(bq, &state);
- if (ret < 0)
- return ret;
-
mutex_lock(&bq->lock);
- bq->state = state;
- mutex_unlock(&bq->lock);
+
+ ret = bq25890_get_chip_state(bq, &bq->state);
+ if (ret < 0)
+ goto unlock;
/* Re-enable ADC only if charger is plugged in. */
- if (state.online) {
- ret = bq25890_field_write(bq, F_CONV_START, 1);
+ if (bq->state.online) {
+ ret = bq25890_field_write(bq, F_CONV_RATE, 1);
if (ret < 0)
- return ret;
+ goto unlock;
}
/* signal userspace, maybe state changed while suspended */
power_supply_changed(bq->charger);
- return 0;
+unlock:
+ mutex_unlock(&bq->lock);
+
+ return ret;
}
#endif
diff --git a/drivers/power/supply/charger-manager.c b/drivers/power/supply/charger-manager.c
index a21e1a2673f8..2ef53dc1f2fb 100644
--- a/drivers/power/supply/charger-manager.c
+++ b/drivers/power/supply/charger-manager.c
@@ -1422,7 +1422,9 @@ static int charger_manager_prepare_sysfs(struct charger_manager *cm)
}
static int cm_init_thermal_data(struct charger_manager *cm,
- struct power_supply *fuel_gauge)
+ struct power_supply *fuel_gauge,
+ enum power_supply_property *properties,
+ size_t *num_properties)
{
struct charger_desc *desc = cm->desc;
union power_supply_propval val;
@@ -1433,9 +1435,8 @@ static int cm_init_thermal_data(struct charger_manager *cm,
POWER_SUPPLY_PROP_TEMP, &val);
if (!ret) {
- cm->charger_psy_desc.properties[cm->charger_psy_desc.num_properties] =
- POWER_SUPPLY_PROP_TEMP;
- cm->charger_psy_desc.num_properties++;
+ properties[*num_properties] = POWER_SUPPLY_PROP_TEMP;
+ (*num_properties)++;
cm->desc->measure_battery_temp = true;
}
#ifdef CONFIG_THERMAL
@@ -1446,9 +1447,8 @@ static int cm_init_thermal_data(struct charger_manager *cm,
return PTR_ERR(cm->tzd_batt);
/* Use external thermometer */
- cm->charger_psy_desc.properties[cm->charger_psy_desc.num_properties] =
- POWER_SUPPLY_PROP_TEMP_AMBIENT;
- cm->charger_psy_desc.num_properties++;
+ properties[*num_properties] = POWER_SUPPLY_PROP_TEMP_AMBIENT;
+ (*num_properties)++;
cm->desc->measure_battery_temp = true;
ret = 0;
}
@@ -1621,6 +1621,8 @@ static int charger_manager_probe(struct platform_device *pdev)
int j = 0;
union power_supply_propval val;
struct power_supply *fuel_gauge;
+ enum power_supply_property *properties;
+ size_t num_properties;
struct power_supply_config psy_cfg = {};
if (IS_ERR(desc)) {
@@ -1717,18 +1719,17 @@ static int charger_manager_probe(struct platform_device *pdev)
cm->charger_psy_desc.name = cm->psy_name_buf;
/* Allocate for psy properties because they may vary */
- cm->charger_psy_desc.properties =
- devm_kcalloc(&pdev->dev,
+ properties = devm_kcalloc(&pdev->dev,
ARRAY_SIZE(default_charger_props) +
NUM_CHARGER_PSY_OPTIONAL,
- sizeof(enum power_supply_property), GFP_KERNEL);
- if (!cm->charger_psy_desc.properties)
+ sizeof(*properties), GFP_KERNEL);
+ if (!properties)
return -ENOMEM;
- memcpy(cm->charger_psy_desc.properties, default_charger_props,
+ memcpy(properties, default_charger_props,
sizeof(enum power_supply_property) *
ARRAY_SIZE(default_charger_props));
- cm->charger_psy_desc.num_properties = psy_default.num_properties;
+ num_properties = ARRAY_SIZE(default_charger_props);
/* Find which optional psy-properties are available */
fuel_gauge = power_supply_get_by_name(desc->psy_fuel_gauge);
@@ -1739,25 +1740,28 @@ static int charger_manager_probe(struct platform_device *pdev)
}
if (!power_supply_get_property(fuel_gauge,
POWER_SUPPLY_PROP_CHARGE_NOW, &val)) {
- cm->charger_psy_desc.properties[cm->charger_psy_desc.num_properties] =
+ properties[num_properties] =
POWER_SUPPLY_PROP_CHARGE_NOW;
- cm->charger_psy_desc.num_properties++;
+ num_properties++;
}
if (!power_supply_get_property(fuel_gauge,
POWER_SUPPLY_PROP_CURRENT_NOW,
&val)) {
- cm->charger_psy_desc.properties[cm->charger_psy_desc.num_properties] =
+ properties[num_properties] =
POWER_SUPPLY_PROP_CURRENT_NOW;
- cm->charger_psy_desc.num_properties++;
+ num_properties++;
}
- ret = cm_init_thermal_data(cm, fuel_gauge);
+ ret = cm_init_thermal_data(cm, fuel_gauge, properties, &num_properties);
if (ret) {
dev_err(&pdev->dev, "Failed to initialize thermal data\n");
cm->desc->measure_battery_temp = false;
}
power_supply_put(fuel_gauge);
+ cm->charger_psy_desc.properties = properties;
+ cm->charger_psy_desc.num_properties = num_properties;
+
INIT_DELAYED_WORK(&cm->fullbatt_vchk_work, fullbatt_vchk);
/* Register sysfs entry for charger(regulator) */
diff --git a/drivers/power/supply/cw2015_battery.c b/drivers/power/supply/cw2015_battery.c
new file mode 100644
index 000000000000..19f62ea957ee
--- /dev/null
+++ b/drivers/power/supply/cw2015_battery.c
@@ -0,0 +1,749 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Fuel gauge driver for CellWise 2013 / 2015
+ *
+ * Copyright (C) 2012, RockChip
+ * Copyright (C) 2020, Tobias Schramm
+ *
+ * Authors: xuhuicong <xhc@rock-chips.com>
+ * Authors: Tobias Schramm <t.schramm@manjaro.org>
+ */
+
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/gfp.h>
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/time.h>
+#include <linux/workqueue.h>
+
+#define CW2015_SIZE_BATINFO 64
+
+#define CW2015_RESET_TRIES 5
+
+#define CW2015_REG_VERSION 0x00
+#define CW2015_REG_VCELL 0x02
+#define CW2015_REG_SOC 0x04
+#define CW2015_REG_RRT_ALERT 0x06
+#define CW2015_REG_CONFIG 0x08
+#define CW2015_REG_MODE 0x0A
+#define CW2015_REG_BATINFO 0x10
+
+#define CW2015_MODE_SLEEP_MASK GENMASK(7, 6)
+#define CW2015_MODE_SLEEP (0x03 << 6)
+#define CW2015_MODE_NORMAL (0x00 << 6)
+#define CW2015_MODE_QUICK_START (0x03 << 4)
+#define CW2015_MODE_RESTART (0x0f << 0)
+
+#define CW2015_CONFIG_UPDATE_FLG (0x01 << 1)
+#define CW2015_ATHD(x) ((x) << 3)
+#define CW2015_MASK_ATHD GENMASK(7, 3)
+#define CW2015_MASK_SOC GENMASK(12, 0)
+
+/* reset gauge of no valid state of charge could be polled for 40s */
+#define CW2015_BAT_SOC_ERROR_MS (40 * MSEC_PER_SEC)
+/* reset gauge if state of charge stuck for half an hour during charging */
+#define CW2015_BAT_CHARGING_STUCK_MS (1800 * MSEC_PER_SEC)
+
+/* poll interval from CellWise GPL Android driver example */
+#define CW2015_DEFAULT_POLL_INTERVAL_MS 8000
+
+#define CW2015_AVERAGING_SAMPLES 3
+
+struct cw_battery {
+ struct device *dev;
+ struct workqueue_struct *battery_workqueue;
+ struct delayed_work battery_delay_work;
+ struct regmap *regmap;
+ struct power_supply *rk_bat;
+ struct power_supply_battery_info battery;
+ u8 *bat_profile;
+
+ bool charger_attached;
+ bool battery_changed;
+
+ int soc;
+ int voltage_mv;
+ int status;
+ int time_to_empty;
+ int charge_count;
+
+ u32 poll_interval_ms;
+ u8 alert_level;
+
+ unsigned int read_errors;
+ unsigned int charge_stuck_cnt;
+};
+
+static int cw_read_word(struct cw_battery *cw_bat, u8 reg, u16 *val)
+{
+ __be16 value;
+ int ret;
+
+ ret = regmap_bulk_read(cw_bat->regmap, reg, &value, sizeof(value));
+ if (ret)
+ return ret;
+
+ *val = be16_to_cpu(value);
+ return 0;
+}
+
+static int cw_update_profile(struct cw_battery *cw_bat)
+{
+ int ret;
+ unsigned int reg_val;
+ u8 reset_val;
+
+ /* make sure gauge is not in sleep mode */
+ ret = regmap_read(cw_bat->regmap, CW2015_REG_MODE, &reg_val);
+ if (ret)
+ return ret;
+
+ reset_val = reg_val;
+ if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) {
+ dev_err(cw_bat->dev,
+ "Gauge is in sleep mode, can't update battery info\n");
+ return -EINVAL;
+ }
+
+ /* write new battery info */
+ ret = regmap_raw_write(cw_bat->regmap, CW2015_REG_BATINFO,
+ cw_bat->bat_profile,
+ CW2015_SIZE_BATINFO);
+ if (ret)
+ return ret;
+
+ /* set config update flag */
+ reg_val |= CW2015_CONFIG_UPDATE_FLG;
+ reg_val &= ~CW2015_MASK_ATHD;
+ reg_val |= CW2015_ATHD(cw_bat->alert_level);
+ ret = regmap_write(cw_bat->regmap, CW2015_REG_CONFIG, reg_val);
+ if (ret)
+ return ret;
+
+ /* reset gauge to apply new battery profile */
+ reset_val &= ~CW2015_MODE_RESTART;
+ reg_val = reset_val | CW2015_MODE_RESTART;
+ ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reg_val);
+ if (ret)
+ return ret;
+
+ /* wait for gauge to reset */
+ msleep(20);
+
+ /* clear reset flag */
+ ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reset_val);
+ if (ret)
+ return ret;
+
+ /* wait for gauge to become ready */
+ ret = regmap_read_poll_timeout(cw_bat->regmap, CW2015_REG_SOC,
+ reg_val, reg_val <= 100,
+ 10 * USEC_PER_MSEC, 10 * USEC_PER_SEC);
+ if (ret)
+ dev_err(cw_bat->dev,
+ "Gauge did not become ready after profile upload\n");
+ else
+ dev_dbg(cw_bat->dev, "Battery profile updated\n");
+
+ return ret;
+}
+
+static int cw_init(struct cw_battery *cw_bat)
+{
+ int ret;
+ unsigned int reg_val = CW2015_MODE_SLEEP;
+
+ if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) {
+ reg_val = CW2015_MODE_NORMAL;
+ ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reg_val);
+ if (ret)
+ return ret;
+ }
+
+ ret = regmap_read(cw_bat->regmap, CW2015_REG_CONFIG, &reg_val);
+ if (ret)
+ return ret;
+
+ if ((reg_val & CW2015_MASK_ATHD) != CW2015_ATHD(cw_bat->alert_level)) {
+ dev_dbg(cw_bat->dev, "Setting new alert level\n");
+ reg_val &= ~CW2015_MASK_ATHD;
+ reg_val |= ~CW2015_ATHD(cw_bat->alert_level);
+ ret = regmap_write(cw_bat->regmap, CW2015_REG_CONFIG, reg_val);
+ if (ret)
+ return ret;
+ }
+
+ ret = regmap_read(cw_bat->regmap, CW2015_REG_CONFIG, &reg_val);
+ if (ret)
+ return ret;
+
+ if (!(reg_val & CW2015_CONFIG_UPDATE_FLG)) {
+ dev_dbg(cw_bat->dev,
+ "Battery profile not present, uploading battery profile\n");
+ if (cw_bat->bat_profile) {
+ ret = cw_update_profile(cw_bat);
+ if (ret) {
+ dev_err(cw_bat->dev,
+ "Failed to upload battery profile\n");
+ return ret;
+ }
+ } else {
+ dev_warn(cw_bat->dev,
+ "No profile specified, continuing without profile\n");
+ }
+ } else if (cw_bat->bat_profile) {
+ u8 bat_info[CW2015_SIZE_BATINFO];
+
+ ret = regmap_raw_read(cw_bat->regmap, CW2015_REG_BATINFO,
+ bat_info, CW2015_SIZE_BATINFO);
+ if (ret) {
+ dev_err(cw_bat->dev,
+ "Failed to read stored battery profile\n");
+ return ret;
+ }
+
+ if (memcmp(bat_info, cw_bat->bat_profile, CW2015_SIZE_BATINFO)) {
+ dev_warn(cw_bat->dev, "Replacing stored battery profile\n");
+ ret = cw_update_profile(cw_bat);
+ if (ret)
+ return ret;
+ }
+ } else {
+ dev_warn(cw_bat->dev,
+ "Can't check current battery profile, no profile provided\n");
+ }
+
+ dev_dbg(cw_bat->dev, "Battery profile configured\n");
+ return 0;
+}
+
+static int cw_power_on_reset(struct cw_battery *cw_bat)
+{
+ int ret;
+ unsigned char reset_val;
+
+ reset_val = CW2015_MODE_SLEEP;
+ ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reset_val);
+ if (ret)
+ return ret;
+
+ /* wait for gauge to enter sleep */
+ msleep(20);
+
+ reset_val = CW2015_MODE_NORMAL;
+ ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reset_val);
+ if (ret)
+ return ret;
+
+ ret = cw_init(cw_bat);
+ if (ret)
+ return ret;
+ return 0;
+}
+
+#define HYSTERESIS(current, previous, up, down) \
+ (((current) < (previous) + (up)) && ((current) > (previous) - (down)))
+
+static int cw_get_soc(struct cw_battery *cw_bat)
+{
+ unsigned int soc;
+ int ret;
+
+ ret = regmap_read(cw_bat->regmap, CW2015_REG_SOC, &soc);
+ if (ret)
+ return ret;
+
+ if (soc > 100) {
+ int max_error_cycles =
+ CW2015_BAT_SOC_ERROR_MS / cw_bat->poll_interval_ms;
+
+ dev_err(cw_bat->dev, "Invalid SoC %d%%\n", soc);
+ cw_bat->read_errors++;
+ if (cw_bat->read_errors > max_error_cycles) {
+ dev_warn(cw_bat->dev,
+ "Too many invalid SoC reports, resetting gauge\n");
+ cw_power_on_reset(cw_bat);
+ cw_bat->read_errors = 0;
+ }
+ return cw_bat->soc;
+ }
+ cw_bat->read_errors = 0;
+
+ /* Reset gauge if stuck while charging */
+ if (cw_bat->status == POWER_SUPPLY_STATUS_CHARGING && soc == cw_bat->soc) {
+ int max_stuck_cycles =
+ CW2015_BAT_CHARGING_STUCK_MS / cw_bat->poll_interval_ms;
+
+ cw_bat->charge_stuck_cnt++;
+ if (cw_bat->charge_stuck_cnt > max_stuck_cycles) {
+ dev_warn(cw_bat->dev,
+ "SoC stuck @%u%%, resetting gauge\n", soc);
+ cw_power_on_reset(cw_bat);
+ cw_bat->charge_stuck_cnt = 0;
+ }
+ } else {
+ cw_bat->charge_stuck_cnt = 0;
+ }
+
+ /* Ignore voltage dips during charge */
+ if (cw_bat->charger_attached && HYSTERESIS(soc, cw_bat->soc, 0, 3))
+ soc = cw_bat->soc;
+
+ /* Ignore voltage spikes during discharge */
+ if (!cw_bat->charger_attached && HYSTERESIS(soc, cw_bat->soc, 3, 0))
+ soc = cw_bat->soc;
+
+ return soc;
+}
+
+static int cw_get_voltage(struct cw_battery *cw_bat)
+{
+ int ret, i, voltage_mv;
+ u16 reg_val;
+ u32 avg = 0;
+
+ for (i = 0; i < CW2015_AVERAGING_SAMPLES; i++) {
+ ret = cw_read_word(cw_bat, CW2015_REG_VCELL, &reg_val);
+ if (ret)
+ return ret;
+
+ avg += reg_val;
+ }
+ avg /= CW2015_AVERAGING_SAMPLES;
+
+ /*
+ * 305 uV per ADC step
+ * Use 312 / 1024 as efficient approximation of 305 / 1000
+ * Negligible error of 0.1%
+ */
+ voltage_mv = avg * 312 / 1024;
+
+ dev_dbg(cw_bat->dev, "Read voltage: %d mV, raw=0x%04x\n",
+ voltage_mv, reg_val);
+ return voltage_mv;
+}
+
+static int cw_get_time_to_empty(struct cw_battery *cw_bat)
+{
+ int ret;
+ u16 value16;
+
+ ret = cw_read_word(cw_bat, CW2015_REG_RRT_ALERT, &value16);
+ if (ret)
+ return ret;
+
+ return value16 & CW2015_MASK_SOC;
+}
+
+static void cw_update_charge_status(struct cw_battery *cw_bat)
+{
+ int ret;
+
+ ret = power_supply_am_i_supplied(cw_bat->rk_bat);
+ if (ret < 0) {
+ dev_warn(cw_bat->dev, "Failed to get supply state: %d\n", ret);
+ } else {
+ bool charger_attached;
+
+ charger_attached = !!ret;
+ if (cw_bat->charger_attached != charger_attached) {
+ cw_bat->battery_changed = true;
+ if (charger_attached)
+ cw_bat->charge_count++;
+ }
+ cw_bat->charger_attached = charger_attached;
+ }
+}
+
+static void cw_update_soc(struct cw_battery *cw_bat)
+{
+ int soc;
+
+ soc = cw_get_soc(cw_bat);
+ if (soc < 0)
+ dev_err(cw_bat->dev, "Failed to get SoC from gauge: %d\n", soc);
+ else if (cw_bat->soc != soc) {
+ cw_bat->soc = soc;
+ cw_bat->battery_changed = true;
+ }
+}
+
+static void cw_update_voltage(struct cw_battery *cw_bat)
+{
+ int voltage_mv;
+
+ voltage_mv = cw_get_voltage(cw_bat);
+ if (voltage_mv < 0)
+ dev_err(cw_bat->dev, "Failed to get voltage from gauge: %d\n",
+ voltage_mv);
+ else
+ cw_bat->voltage_mv = voltage_mv;
+}
+
+static void cw_update_status(struct cw_battery *cw_bat)
+{
+ int status = POWER_SUPPLY_STATUS_DISCHARGING;
+
+ if (cw_bat->charger_attached) {
+ if (cw_bat->soc >= 100)
+ status = POWER_SUPPLY_STATUS_FULL;
+ else
+ status = POWER_SUPPLY_STATUS_CHARGING;
+ }
+
+ if (cw_bat->status != status)
+ cw_bat->battery_changed = true;
+ cw_bat->status = status;
+}
+
+static void cw_update_time_to_empty(struct cw_battery *cw_bat)
+{
+ int time_to_empty;
+
+ time_to_empty = cw_get_time_to_empty(cw_bat);
+ if (time_to_empty < 0)
+ dev_err(cw_bat->dev, "Failed to get time to empty from gauge: %d\n",
+ time_to_empty);
+ else if (cw_bat->time_to_empty != time_to_empty) {
+ cw_bat->time_to_empty = time_to_empty;
+ cw_bat->battery_changed = true;
+ }
+}
+
+static void cw_bat_work(struct work_struct *work)
+{
+ struct delayed_work *delay_work;
+ struct cw_battery *cw_bat;
+ int ret;
+ unsigned int reg_val;
+
+ delay_work = to_delayed_work(work);
+ cw_bat = container_of(delay_work, struct cw_battery, battery_delay_work);
+ ret = regmap_read(cw_bat->regmap, CW2015_REG_MODE, &reg_val);
+ if (ret) {
+ dev_err(cw_bat->dev, "Failed to read mode from gauge: %d\n", ret);
+ } else {
+ if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) {
+ int i;
+
+ for (i = 0; i < CW2015_RESET_TRIES; i++) {
+ if (!cw_power_on_reset(cw_bat))
+ break;
+ }
+ }
+ cw_update_soc(cw_bat);
+ cw_update_voltage(cw_bat);
+ cw_update_charge_status(cw_bat);
+ cw_update_status(cw_bat);
+ cw_update_time_to_empty(cw_bat);
+ }
+ dev_dbg(cw_bat->dev, "charger_attached = %d\n", cw_bat->charger_attached);
+ dev_dbg(cw_bat->dev, "status = %d\n", cw_bat->status);
+ dev_dbg(cw_bat->dev, "soc = %d%%\n", cw_bat->soc);
+ dev_dbg(cw_bat->dev, "voltage = %dmV\n", cw_bat->voltage_mv);
+
+ if (cw_bat->battery_changed)
+ power_supply_changed(cw_bat->rk_bat);
+ cw_bat->battery_changed = false;
+
+ queue_delayed_work(cw_bat->battery_workqueue,
+ &cw_bat->battery_delay_work,
+ msecs_to_jiffies(cw_bat->poll_interval_ms));
+}
+
+static bool cw_battery_valid_time_to_empty(struct cw_battery *cw_bat)
+{
+ return cw_bat->time_to_empty > 0 &&
+ cw_bat->time_to_empty < CW2015_MASK_SOC &&
+ cw_bat->status == POWER_SUPPLY_STATUS_DISCHARGING;
+}
+
+static int cw_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct cw_battery *cw_bat;
+
+ cw_bat = power_supply_get_drvdata(psy);
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CAPACITY:
+ val->intval = cw_bat->soc;
+ break;
+
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = cw_bat->status;
+ break;
+
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = !!cw_bat->voltage_mv;
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = cw_bat->voltage_mv * 1000;
+ break;
+
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+ if (cw_battery_valid_time_to_empty(cw_bat))
+ val->intval = cw_bat->time_to_empty;
+ else
+ val->intval = 0;
+ break;
+
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+ val->intval = cw_bat->charge_count;
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+ if (cw_bat->battery.charge_full_design_uah > 0)
+ val->intval = cw_bat->battery.charge_full_design_uah;
+ else
+ val->intval = 0;
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ if (cw_battery_valid_time_to_empty(cw_bat) &&
+ cw_bat->battery.charge_full_design_uah > 0) {
+ /* calculate remaining capacity */
+ val->intval = cw_bat->battery.charge_full_design_uah;
+ val->intval = val->intval * cw_bat->soc / 100;
+
+ /* estimate current based on time to empty */
+ val->intval = 60 * val->intval / cw_bat->time_to_empty;
+ } else {
+ val->intval = 0;
+ }
+
+ break;
+
+ default:
+ break;
+ }
+ return 0;
+}
+
+static enum power_supply_property cw_battery_properties[] = {
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static const struct power_supply_desc cw2015_bat_desc = {
+ .name = "cw2015-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = cw_battery_properties,
+ .num_properties = ARRAY_SIZE(cw_battery_properties),
+ .get_property = cw_battery_get_property,
+};
+
+static int cw2015_parse_properties(struct cw_battery *cw_bat)
+{
+ struct device *dev = cw_bat->dev;
+ int length;
+ int ret;
+
+ length = device_property_count_u8(dev, "cellwise,battery-profile");
+ if (length < 0) {
+ dev_warn(cw_bat->dev,
+ "No battery-profile found, using current flash contents\n");
+ } else if (length != CW2015_SIZE_BATINFO) {
+ dev_err(cw_bat->dev, "battery-profile must be %d bytes\n",
+ CW2015_SIZE_BATINFO);
+ return -EINVAL;
+ } else {
+ cw_bat->bat_profile = devm_kzalloc(dev, length, GFP_KERNEL);
+ if (!cw_bat->bat_profile)
+ return -ENOMEM;
+
+ ret = device_property_read_u8_array(dev,
+ "cellwise,battery-profile",
+ cw_bat->bat_profile,
+ length);
+ if (ret)
+ return ret;
+ }
+
+ ret = device_property_read_u32(dev, "cellwise,monitor-interval-ms",
+ &cw_bat->poll_interval_ms);
+ if (ret) {
+ dev_dbg(cw_bat->dev, "Using default poll interval\n");
+ cw_bat->poll_interval_ms = CW2015_DEFAULT_POLL_INTERVAL_MS;
+ }
+
+ return 0;
+}
+
+static const struct regmap_range regmap_ranges_rd_yes[] = {
+ regmap_reg_range(CW2015_REG_VERSION, CW2015_REG_VERSION),
+ regmap_reg_range(CW2015_REG_VCELL, CW2015_REG_CONFIG),
+ regmap_reg_range(CW2015_REG_MODE, CW2015_REG_MODE),
+ regmap_reg_range(CW2015_REG_BATINFO,
+ CW2015_REG_BATINFO + CW2015_SIZE_BATINFO - 1),
+};
+
+static const struct regmap_access_table regmap_rd_table = {
+ .yes_ranges = regmap_ranges_rd_yes,
+ .n_yes_ranges = 4,
+};
+
+static const struct regmap_range regmap_ranges_wr_yes[] = {
+ regmap_reg_range(CW2015_REG_RRT_ALERT, CW2015_REG_CONFIG),
+ regmap_reg_range(CW2015_REG_MODE, CW2015_REG_MODE),
+ regmap_reg_range(CW2015_REG_BATINFO,
+ CW2015_REG_BATINFO + CW2015_SIZE_BATINFO - 1),
+};
+
+static const struct regmap_access_table regmap_wr_table = {
+ .yes_ranges = regmap_ranges_wr_yes,
+ .n_yes_ranges = 3,
+};
+
+static const struct regmap_range regmap_ranges_vol_yes[] = {
+ regmap_reg_range(CW2015_REG_VCELL, CW2015_REG_SOC + 1),
+};
+
+static const struct regmap_access_table regmap_vol_table = {
+ .yes_ranges = regmap_ranges_vol_yes,
+ .n_yes_ranges = 1,
+};
+
+static const struct regmap_config cw2015_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .rd_table = &regmap_rd_table,
+ .wr_table = &regmap_wr_table,
+ .volatile_table = &regmap_vol_table,
+ .max_register = CW2015_REG_BATINFO + CW2015_SIZE_BATINFO - 1,
+};
+
+static int cw_bat_probe(struct i2c_client *client)
+{
+ int ret;
+ struct cw_battery *cw_bat;
+ struct power_supply_config psy_cfg = { 0 };
+
+ cw_bat = devm_kzalloc(&client->dev, sizeof(*cw_bat), GFP_KERNEL);
+ if (!cw_bat)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, cw_bat);
+ cw_bat->dev = &client->dev;
+ cw_bat->soc = 1;
+
+ ret = cw2015_parse_properties(cw_bat);
+ if (ret) {
+ dev_err(cw_bat->dev, "Failed to parse cw2015 properties\n");
+ return ret;
+ }
+
+ cw_bat->regmap = devm_regmap_init_i2c(client, &cw2015_regmap_config);
+ if (IS_ERR(cw_bat->regmap)) {
+ dev_err(cw_bat->dev, "Failed to allocate regmap: %ld\n",
+ PTR_ERR(cw_bat->regmap));
+ return PTR_ERR(cw_bat->regmap);
+ }
+
+ ret = cw_init(cw_bat);
+ if (ret) {
+ dev_err(cw_bat->dev, "Init failed: %d\n", ret);
+ return ret;
+ }
+
+ psy_cfg.drv_data = cw_bat;
+ psy_cfg.fwnode = dev_fwnode(cw_bat->dev);
+
+ cw_bat->rk_bat = devm_power_supply_register(&client->dev,
+ &cw2015_bat_desc,
+ &psy_cfg);
+ if (IS_ERR(cw_bat->rk_bat)) {
+ dev_err(cw_bat->dev, "Failed to register power supply\n");
+ return PTR_ERR(cw_bat->rk_bat);
+ }
+
+ ret = power_supply_get_battery_info(cw_bat->rk_bat, &cw_bat->battery);
+ if (ret) {
+ dev_warn(cw_bat->dev,
+ "No monitored battery, some properties will be missing\n");
+ }
+
+ cw_bat->battery_workqueue = create_singlethread_workqueue("rk_battery");
+ INIT_DELAYED_WORK(&cw_bat->battery_delay_work, cw_bat_work);
+ queue_delayed_work(cw_bat->battery_workqueue,
+ &cw_bat->battery_delay_work, msecs_to_jiffies(10));
+ return 0;
+}
+
+static int __maybe_unused cw_bat_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct cw_battery *cw_bat = i2c_get_clientdata(client);
+
+ cancel_delayed_work_sync(&cw_bat->battery_delay_work);
+ return 0;
+}
+
+static int __maybe_unused cw_bat_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct cw_battery *cw_bat = i2c_get_clientdata(client);
+
+ queue_delayed_work(cw_bat->battery_workqueue,
+ &cw_bat->battery_delay_work, 0);
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(cw_bat_pm_ops, cw_bat_suspend, cw_bat_resume);
+
+static int cw_bat_remove(struct i2c_client *client)
+{
+ struct cw_battery *cw_bat = i2c_get_clientdata(client);
+
+ cancel_delayed_work_sync(&cw_bat->battery_delay_work);
+ power_supply_put_battery_info(cw_bat->rk_bat, &cw_bat->battery);
+ return 0;
+}
+
+static const struct i2c_device_id cw_bat_id_table[] = {
+ { "cw2015", 0 },
+ { }
+};
+
+static const struct of_device_id cw2015_of_match[] = {
+ { .compatible = "cellwise,cw2015" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, cw2015_of_match);
+
+static struct i2c_driver cw_bat_driver = {
+ .driver = {
+ .name = "cw2015",
+ .pm = &cw_bat_pm_ops,
+ },
+ .probe_new = cw_bat_probe,
+ .remove = cw_bat_remove,
+ .id_table = cw_bat_id_table,
+};
+
+module_i2c_driver(cw_bat_driver);
+
+MODULE_AUTHOR("xhc<xhc@rock-chips.com>");
+MODULE_AUTHOR("Tobias Schramm <t.schramm@manjaro.org>");
+MODULE_DESCRIPTION("cw2015/cw2013 battery driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/generic-adc-battery.c b/drivers/power/supply/generic-adc-battery.c
index bc462d1ec963..caa829738ef7 100644
--- a/drivers/power/supply/generic-adc-battery.c
+++ b/drivers/power/supply/generic-adc-battery.c
@@ -241,6 +241,7 @@ static int gab_probe(struct platform_device *pdev)
struct power_supply_desc *psy_desc;
struct power_supply_config psy_cfg = {};
struct gab_platform_data *pdata = pdev->dev.platform_data;
+ enum power_supply_property *properties;
int ret = 0;
int chan;
int index = ARRAY_SIZE(gab_props);
@@ -268,16 +269,16 @@ static int gab_probe(struct platform_device *pdev)
* copying the static properties and allocating extra memory for holding
* the extra configurable properties received from platform data.
*/
- psy_desc->properties = kcalloc(ARRAY_SIZE(gab_props) +
- ARRAY_SIZE(gab_chan_name),
- sizeof(*psy_desc->properties),
- GFP_KERNEL);
- if (!psy_desc->properties) {
+ properties = kcalloc(ARRAY_SIZE(gab_props) +
+ ARRAY_SIZE(gab_chan_name),
+ sizeof(*properties),
+ GFP_KERNEL);
+ if (!properties) {
ret = -ENOMEM;
goto first_mem_fail;
}
- memcpy(psy_desc->properties, gab_props, sizeof(gab_props));
+ memcpy(properties, gab_props, sizeof(gab_props));
/*
* getting channel from iio and copying the battery properties
@@ -294,13 +295,11 @@ static int gab_probe(struct platform_device *pdev)
int index2;
for (index2 = 0; index2 < index; index2++) {
- if (psy_desc->properties[index2] ==
- gab_dyn_props[chan])
+ if (properties[index2] == gab_dyn_props[chan])
break; /* already known */
}
if (index2 == index) /* really new */
- psy_desc->properties[index++] =
- gab_dyn_props[chan];
+ properties[index++] = gab_dyn_props[chan];
any = true;
}
}
@@ -317,6 +316,7 @@ static int gab_probe(struct platform_device *pdev)
* as come channels may be not be supported by the device.So
* we need to take care of that.
*/
+ psy_desc->properties = properties;
psy_desc->num_properties = index;
adc_bat->psy = power_supply_register(&pdev->dev, psy_desc, &psy_cfg);
@@ -358,7 +358,7 @@ err_reg_fail:
iio_channel_release(adc_bat->channel[chan]);
}
second_mem_fail:
- kfree(psy_desc->properties);
+ kfree(properties);
first_mem_fail:
return ret;
}
diff --git a/drivers/power/supply/lp8788-charger.c b/drivers/power/supply/lp8788-charger.c
index 84a206f42a8e..e7931ffb7151 100644
--- a/drivers/power/supply/lp8788-charger.c
+++ b/drivers/power/supply/lp8788-charger.c
@@ -572,27 +572,14 @@ static void lp8788_setup_adc_channel(struct device *dev,
return;
/* ADC channel for battery voltage */
- chan = iio_channel_get(dev, pdata->adc_vbatt);
+ chan = devm_iio_channel_get(dev, pdata->adc_vbatt);
pchg->chan[LP8788_VBATT] = IS_ERR(chan) ? NULL : chan;
/* ADC channel for battery temperature */
- chan = iio_channel_get(dev, pdata->adc_batt_temp);
+ chan = devm_iio_channel_get(dev, pdata->adc_batt_temp);
pchg->chan[LP8788_BATT_TEMP] = IS_ERR(chan) ? NULL : chan;
}
-static void lp8788_release_adc_channel(struct lp8788_charger *pchg)
-{
- int i;
-
- for (i = 0; i < LP8788_NUM_CHG_ADC; i++) {
- if (!pchg->chan[i])
- continue;
-
- iio_channel_release(pchg->chan[i]);
- pchg->chan[i] = NULL;
- }
-}
-
static ssize_t lp8788_show_charger_status(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -735,7 +722,6 @@ static int lp8788_charger_remove(struct platform_device *pdev)
flush_work(&pchg->charger_work);
lp8788_irq_unregister(pdev, pchg);
lp8788_psy_unregister(pchg);
- lp8788_release_adc_channel(pchg);
return 0;
}
diff --git a/drivers/power/supply/max14656_charger_detector.c b/drivers/power/supply/max14656_charger_detector.c
index 3bbb8b4c8ae7..137f9fafce8c 100644
--- a/drivers/power/supply/max14656_charger_detector.c
+++ b/drivers/power/supply/max14656_charger_detector.c
@@ -139,10 +139,9 @@ static void max14656_irq_worker(struct work_struct *work)
u8 buf[REG_TOTAL_NUM];
u8 chg_type;
- int ret = 0;
- ret = max14656_read_block_reg(chip->client, MAX14656_DEVICE_ID,
- REG_TOTAL_NUM, buf);
+ max14656_read_block_reg(chip->client, MAX14656_DEVICE_ID,
+ REG_TOTAL_NUM, buf);
if ((buf[MAX14656_STATUS_1] & STATUS1_VB_VALID_MASK) &&
(buf[MAX14656_STATUS_1] & STATUS1_CHG_TYPE_MASK)) {
diff --git a/drivers/power/supply/max17040_battery.c b/drivers/power/supply/max17040_battery.c
index 8a1f0ee493aa..48aa44665e2f 100644
--- a/drivers/power/supply/max17040_battery.c
+++ b/drivers/power/supply/max17040_battery.c
@@ -126,7 +126,7 @@ static void max17040_get_vcell(struct i2c_client *client)
vcell = max17040_read_reg(client, MAX17040_VCELL);
- chip->vcell = vcell;
+ chip->vcell = (vcell >> 4) * 1250;
}
static void max17040_get_soc(struct i2c_client *client)
diff --git a/drivers/power/supply/max17042_battery.c b/drivers/power/supply/max17042_battery.c
index 69ec4295d55d..f284547913d6 100644
--- a/drivers/power/supply/max17042_battery.c
+++ b/drivers/power/supply/max17042_battery.c
@@ -87,6 +87,7 @@ static enum power_supply_property max17042_battery_props[] = {
POWER_SUPPLY_PROP_SCOPE,
POWER_SUPPLY_PROP_CURRENT_NOW,
POWER_SUPPLY_PROP_CURRENT_AVG,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
};
static int max17042_get_temperature(struct max17042_chip *chip, int *temp)
@@ -411,6 +412,13 @@ static int max17042_get_property(struct power_supply *psy,
return -EINVAL;
}
break;
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+ ret = regmap_read(map, MAX17042_TTE, &data);
+ if (ret < 0)
+ return ret;
+
+ val->intval = data * 5625 / 1000;
+ break;
default:
return -EINVAL;
}
diff --git a/drivers/power/supply/olpc_battery.c b/drivers/power/supply/olpc_battery.c
index ad0e9e0edb3f..e0476ec06601 100644
--- a/drivers/power/supply/olpc_battery.c
+++ b/drivers/power/supply/olpc_battery.c
@@ -88,7 +88,7 @@ static enum power_supply_property olpc_ac_props[] = {
};
static const struct power_supply_desc olpc_ac_desc = {
- .name = "olpc-ac",
+ .name = "olpc_ac",
.type = POWER_SUPPLY_TYPE_MAINS,
.properties = olpc_ac_props,
.num_properties = ARRAY_SIZE(olpc_ac_props),
@@ -605,7 +605,7 @@ static const struct attribute_group *olpc_bat_sysfs_groups[] = {
*********************************************************************/
static struct power_supply_desc olpc_bat_desc = {
- .name = "olpc-battery",
+ .name = "olpc_battery",
.get_property = olpc_bat_get_property,
.use_for_apm = 1,
};
diff --git a/drivers/power/supply/power_supply_core.c b/drivers/power/supply/power_supply_core.c
index 1a9a9fae73d3..02b37fe6061c 100644
--- a/drivers/power/supply/power_supply_core.c
+++ b/drivers/power/supply/power_supply_core.c
@@ -620,10 +620,18 @@ int power_supply_get_battery_info(struct power_supply *psy,
&info->voltage_min_design_uv);
of_property_read_u32(battery_np, "voltage-max-design-microvolt",
&info->voltage_max_design_uv);
+ of_property_read_u32(battery_np, "trickle-charge-current-microamp",
+ &info->tricklecharge_current_ua);
of_property_read_u32(battery_np, "precharge-current-microamp",
&info->precharge_current_ua);
+ of_property_read_u32(battery_np, "precharge-upper-limit-microvolt",
+ &info->precharge_voltage_max_uv);
of_property_read_u32(battery_np, "charge-term-current-microamp",
&info->charge_term_current_ua);
+ of_property_read_u32(battery_np, "re-charge-voltage-microvolt",
+ &info->charge_restart_voltage_uv);
+ of_property_read_u32(battery_np, "over-voltage-threshold-microvolt",
+ &info->overvoltage_limit_uv);
of_property_read_u32(battery_np, "constant-charge-current-max-microamp",
&info->constant_charge_current_max_ua);
of_property_read_u32(battery_np, "constant-charge-voltage-max-microvolt",
diff --git a/drivers/power/supply/power_supply_hwmon.c b/drivers/power/supply/power_supply_hwmon.c
index 75cf861ba492..7fe4b6b6ddc8 100644
--- a/drivers/power/supply/power_supply_hwmon.c
+++ b/drivers/power/supply/power_supply_hwmon.c
@@ -13,6 +13,11 @@ struct power_supply_hwmon {
unsigned long *props;
};
+static const char *const ps_temp_label[] = {
+ "temp",
+ "ambient temp",
+};
+
static int power_supply_hwmon_in_to_property(u32 attr)
{
switch (attr) {
@@ -98,6 +103,39 @@ static bool power_supply_hwmon_is_a_label(enum hwmon_sensor_types type,
return type == hwmon_temp && attr == hwmon_temp_label;
}
+struct hwmon_type_attr_list {
+ const u32 *attrs;
+ size_t n_attrs;
+};
+
+static const u32 ps_temp_attrs[] = {
+ hwmon_temp_input,
+ hwmon_temp_min, hwmon_temp_max,
+ hwmon_temp_min_alarm, hwmon_temp_max_alarm,
+};
+
+static const struct hwmon_type_attr_list ps_type_attrs[hwmon_max] = {
+ [hwmon_temp] = { ps_temp_attrs, ARRAY_SIZE(ps_temp_attrs) },
+};
+
+static bool power_supply_hwmon_has_input(
+ const struct power_supply_hwmon *psyhw,
+ enum hwmon_sensor_types type, int channel)
+{
+ const struct hwmon_type_attr_list *attr_list = &ps_type_attrs[type];
+ size_t i;
+
+ for (i = 0; i < attr_list->n_attrs; ++i) {
+ int prop = power_supply_hwmon_to_property(type,
+ attr_list->attrs[i], channel);
+
+ if (prop >= 0 && test_bit(prop, psyhw->props))
+ return true;
+ }
+
+ return false;
+}
+
static bool power_supply_hwmon_is_writable(enum hwmon_sensor_types type,
u32 attr)
{
@@ -124,9 +162,12 @@ static umode_t power_supply_hwmon_is_visible(const void *data,
const struct power_supply_hwmon *psyhw = data;
int prop;
-
- if (power_supply_hwmon_is_a_label(type, attr))
- return 0444;
+ if (power_supply_hwmon_is_a_label(type, attr)) {
+ if (power_supply_hwmon_has_input(psyhw, type, channel))
+ return 0444;
+ else
+ return 0;
+ }
prop = power_supply_hwmon_to_property(type, attr, channel);
if (prop < 0 || !test_bit(prop, psyhw->props))
@@ -144,7 +185,20 @@ static int power_supply_hwmon_read_string(struct device *dev,
u32 attr, int channel,
const char **str)
{
- *str = channel ? "temp" : "temp ambient";
+ switch (type) {
+ case hwmon_temp:
+ *str = ps_temp_label[channel];
+ break;
+ default:
+ /* unreachable, but see:
+ * gcc bug #51513 [1] and clang bug #978 [2]
+ *
+ * [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=51513
+ * [2] https://github.com/ClangBuiltLinux/linux/issues/978
+ */
+ break;
+ }
+
return 0;
}
@@ -304,7 +358,7 @@ int power_supply_add_hwmon_sysfs(struct power_supply *psy)
goto error;
}
- ret = devm_add_action(dev, power_supply_hwmon_bitmap_free,
+ ret = devm_add_action_or_reset(dev, power_supply_hwmon_bitmap_free,
psyhw->props);
if (ret)
goto error;
diff --git a/drivers/power/supply/power_supply_sysfs.c b/drivers/power/supply/power_supply_sysfs.c
index f37ad4eae60b..d21b4e0edf38 100644
--- a/drivers/power/supply/power_supply_sysfs.c
+++ b/drivers/power/supply/power_supply_sysfs.c
@@ -18,68 +18,206 @@
#include "power_supply.h"
-/*
- * This is because the name "current" breaks the device attr macro.
- * The "current" word resolves to "(get_current())" so instead of
- * "current" "(get_current())" appears in the sysfs.
- *
- * The source of this definition is the device.h which calls __ATTR
- * macro in sysfs.h which calls the __stringify macro.
- *
- * Only modification that the name is not tried to be resolved
- * (as a macro let's say).
- */
+#define MAX_PROP_NAME_LEN 30
+
+struct power_supply_attr {
+ const char *prop_name;
+ char attr_name[MAX_PROP_NAME_LEN + 1];
+ struct device_attribute dev_attr;
+ const char * const *text_values;
+ int text_values_len;
+};
-#define POWER_SUPPLY_ATTR(_name) \
-{ \
- .attr = { .name = #_name }, \
- .show = power_supply_show_property, \
- .store = power_supply_store_property, \
+#define _POWER_SUPPLY_ATTR(_name, _text, _len) \
+[POWER_SUPPLY_PROP_ ## _name] = \
+{ \
+ .prop_name = #_name, \
+ .attr_name = #_name "\0", \
+ .text_values = _text, \
+ .text_values_len = _len, \
}
-static struct device_attribute power_supply_attrs[];
+#define POWER_SUPPLY_ATTR(_name) _POWER_SUPPLY_ATTR(_name, NULL, 0)
+#define _POWER_SUPPLY_ENUM_ATTR(_name, _text) \
+ _POWER_SUPPLY_ATTR(_name, _text, ARRAY_SIZE(_text))
+#define POWER_SUPPLY_ENUM_ATTR(_name) \
+ _POWER_SUPPLY_ENUM_ATTR(_name, POWER_SUPPLY_ ## _name ## _TEXT)
+
+static const char * const POWER_SUPPLY_TYPE_TEXT[] = {
+ [POWER_SUPPLY_TYPE_UNKNOWN] = "Unknown",
+ [POWER_SUPPLY_TYPE_BATTERY] = "Battery",
+ [POWER_SUPPLY_TYPE_UPS] = "UPS",
+ [POWER_SUPPLY_TYPE_MAINS] = "Mains",
+ [POWER_SUPPLY_TYPE_USB] = "USB",
+ [POWER_SUPPLY_TYPE_USB_DCP] = "USB_DCP",
+ [POWER_SUPPLY_TYPE_USB_CDP] = "USB_CDP",
+ [POWER_SUPPLY_TYPE_USB_ACA] = "USB_ACA",
+ [POWER_SUPPLY_TYPE_USB_TYPE_C] = "USB_C",
+ [POWER_SUPPLY_TYPE_USB_PD] = "USB_PD",
+ [POWER_SUPPLY_TYPE_USB_PD_DRP] = "USB_PD_DRP",
+ [POWER_SUPPLY_TYPE_APPLE_BRICK_ID] = "BrickID",
+};
-static const char * const power_supply_type_text[] = {
- "Unknown", "Battery", "UPS", "Mains", "USB",
- "USB_DCP", "USB_CDP", "USB_ACA", "USB_C",
- "USB_PD", "USB_PD_DRP", "BrickID"
+static const char * const POWER_SUPPLY_USB_TYPE_TEXT[] = {
+ [POWER_SUPPLY_USB_TYPE_UNKNOWN] = "Unknown",
+ [POWER_SUPPLY_USB_TYPE_SDP] = "SDP",
+ [POWER_SUPPLY_USB_TYPE_DCP] = "DCP",
+ [POWER_SUPPLY_USB_TYPE_CDP] = "CDP",
+ [POWER_SUPPLY_USB_TYPE_ACA] = "ACA",
+ [POWER_SUPPLY_USB_TYPE_C] = "C",
+ [POWER_SUPPLY_USB_TYPE_PD] = "PD",
+ [POWER_SUPPLY_USB_TYPE_PD_DRP] = "PD_DRP",
+ [POWER_SUPPLY_USB_TYPE_PD_PPS] = "PD_PPS",
+ [POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID] = "BrickID",
};
-static const char * const power_supply_usb_type_text[] = {
- "Unknown", "SDP", "DCP", "CDP", "ACA", "C",
- "PD", "PD_DRP", "PD_PPS", "BrickID"
+static const char * const POWER_SUPPLY_STATUS_TEXT[] = {
+ [POWER_SUPPLY_STATUS_UNKNOWN] = "Unknown",
+ [POWER_SUPPLY_STATUS_CHARGING] = "Charging",
+ [POWER_SUPPLY_STATUS_DISCHARGING] = "Discharging",
+ [POWER_SUPPLY_STATUS_NOT_CHARGING] = "Not charging",
+ [POWER_SUPPLY_STATUS_FULL] = "Full",
};
-static const char * const power_supply_status_text[] = {
- "Unknown", "Charging", "Discharging", "Not charging", "Full"
+static const char * const POWER_SUPPLY_CHARGE_TYPE_TEXT[] = {
+ [POWER_SUPPLY_CHARGE_TYPE_UNKNOWN] = "Unknown",
+ [POWER_SUPPLY_CHARGE_TYPE_NONE] = "N/A",
+ [POWER_SUPPLY_CHARGE_TYPE_TRICKLE] = "Trickle",
+ [POWER_SUPPLY_CHARGE_TYPE_FAST] = "Fast",
+ [POWER_SUPPLY_CHARGE_TYPE_STANDARD] = "Standard",
+ [POWER_SUPPLY_CHARGE_TYPE_ADAPTIVE] = "Adaptive",
+ [POWER_SUPPLY_CHARGE_TYPE_CUSTOM] = "Custom",
};
-static const char * const power_supply_charge_type_text[] = {
- "Unknown", "N/A", "Trickle", "Fast", "Standard", "Adaptive", "Custom"
+static const char * const POWER_SUPPLY_HEALTH_TEXT[] = {
+ [POWER_SUPPLY_HEALTH_UNKNOWN] = "Unknown",
+ [POWER_SUPPLY_HEALTH_GOOD] = "Good",
+ [POWER_SUPPLY_HEALTH_OVERHEAT] = "Overheat",
+ [POWER_SUPPLY_HEALTH_DEAD] = "Dead",
+ [POWER_SUPPLY_HEALTH_OVERVOLTAGE] = "Over voltage",
+ [POWER_SUPPLY_HEALTH_UNSPEC_FAILURE] = "Unspecified failure",
+ [POWER_SUPPLY_HEALTH_COLD] = "Cold",
+ [POWER_SUPPLY_HEALTH_WATCHDOG_TIMER_EXPIRE] = "Watchdog timer expire",
+ [POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE] = "Safety timer expire",
+ [POWER_SUPPLY_HEALTH_OVERCURRENT] = "Over current",
};
-static const char * const power_supply_health_text[] = {
- "Unknown", "Good", "Overheat", "Dead", "Over voltage",
- "Unspecified failure", "Cold", "Watchdog timer expire",
- "Safety timer expire", "Over current"
+static const char * const POWER_SUPPLY_TECHNOLOGY_TEXT[] = {
+ [POWER_SUPPLY_TECHNOLOGY_UNKNOWN] = "Unknown",
+ [POWER_SUPPLY_TECHNOLOGY_NiMH] = "NiMH",
+ [POWER_SUPPLY_TECHNOLOGY_LION] = "Li-ion",
+ [POWER_SUPPLY_TECHNOLOGY_LIPO] = "Li-poly",
+ [POWER_SUPPLY_TECHNOLOGY_LiFe] = "LiFe",
+ [POWER_SUPPLY_TECHNOLOGY_NiCd] = "NiCd",
+ [POWER_SUPPLY_TECHNOLOGY_LiMn] = "LiMn",
};
-static const char * const power_supply_technology_text[] = {
- "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", "NiCd",
- "LiMn"
+static const char * const POWER_SUPPLY_CAPACITY_LEVEL_TEXT[] = {
+ [POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN] = "Unknown",
+ [POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL] = "Critical",
+ [POWER_SUPPLY_CAPACITY_LEVEL_LOW] = "Low",
+ [POWER_SUPPLY_CAPACITY_LEVEL_NORMAL] = "Normal",
+ [POWER_SUPPLY_CAPACITY_LEVEL_HIGH] = "High",
+ [POWER_SUPPLY_CAPACITY_LEVEL_FULL] = "Full",
};
-static const char * const power_supply_capacity_level_text[] = {
- "Unknown", "Critical", "Low", "Normal", "High", "Full"
+static const char * const POWER_SUPPLY_SCOPE_TEXT[] = {
+ [POWER_SUPPLY_SCOPE_UNKNOWN] = "Unknown",
+ [POWER_SUPPLY_SCOPE_SYSTEM] = "System",
+ [POWER_SUPPLY_SCOPE_DEVICE] = "Device",
};
-static const char * const power_supply_scope_text[] = {
- "Unknown", "System", "Device"
+static struct power_supply_attr power_supply_attrs[] = {
+ /* Properties of type `int' */
+ POWER_SUPPLY_ENUM_ATTR(STATUS),
+ POWER_SUPPLY_ENUM_ATTR(CHARGE_TYPE),
+ POWER_SUPPLY_ENUM_ATTR(HEALTH),
+ POWER_SUPPLY_ATTR(PRESENT),
+ POWER_SUPPLY_ATTR(ONLINE),
+ POWER_SUPPLY_ATTR(AUTHENTIC),
+ POWER_SUPPLY_ENUM_ATTR(TECHNOLOGY),
+ POWER_SUPPLY_ATTR(CYCLE_COUNT),
+ POWER_SUPPLY_ATTR(VOLTAGE_MAX),
+ POWER_SUPPLY_ATTR(VOLTAGE_MIN),
+ POWER_SUPPLY_ATTR(VOLTAGE_MAX_DESIGN),
+ POWER_SUPPLY_ATTR(VOLTAGE_MIN_DESIGN),
+ POWER_SUPPLY_ATTR(VOLTAGE_NOW),
+ POWER_SUPPLY_ATTR(VOLTAGE_AVG),
+ POWER_SUPPLY_ATTR(VOLTAGE_OCV),
+ POWER_SUPPLY_ATTR(VOLTAGE_BOOT),
+ POWER_SUPPLY_ATTR(CURRENT_MAX),
+ POWER_SUPPLY_ATTR(CURRENT_NOW),
+ POWER_SUPPLY_ATTR(CURRENT_AVG),
+ POWER_SUPPLY_ATTR(CURRENT_BOOT),
+ POWER_SUPPLY_ATTR(POWER_NOW),
+ POWER_SUPPLY_ATTR(POWER_AVG),
+ POWER_SUPPLY_ATTR(CHARGE_FULL_DESIGN),
+ POWER_SUPPLY_ATTR(CHARGE_EMPTY_DESIGN),
+ POWER_SUPPLY_ATTR(CHARGE_FULL),
+ POWER_SUPPLY_ATTR(CHARGE_EMPTY),
+ POWER_SUPPLY_ATTR(CHARGE_NOW),
+ POWER_SUPPLY_ATTR(CHARGE_AVG),
+ POWER_SUPPLY_ATTR(CHARGE_COUNTER),
+ POWER_SUPPLY_ATTR(CONSTANT_CHARGE_CURRENT),
+ POWER_SUPPLY_ATTR(CONSTANT_CHARGE_CURRENT_MAX),
+ POWER_SUPPLY_ATTR(CONSTANT_CHARGE_VOLTAGE),
+ POWER_SUPPLY_ATTR(CONSTANT_CHARGE_VOLTAGE_MAX),
+ POWER_SUPPLY_ATTR(CHARGE_CONTROL_LIMIT),
+ POWER_SUPPLY_ATTR(CHARGE_CONTROL_LIMIT_MAX),
+ POWER_SUPPLY_ATTR(CHARGE_CONTROL_START_THRESHOLD),
+ POWER_SUPPLY_ATTR(CHARGE_CONTROL_END_THRESHOLD),
+ POWER_SUPPLY_ATTR(INPUT_CURRENT_LIMIT),
+ POWER_SUPPLY_ATTR(INPUT_VOLTAGE_LIMIT),
+ POWER_SUPPLY_ATTR(INPUT_POWER_LIMIT),
+ POWER_SUPPLY_ATTR(ENERGY_FULL_DESIGN),
+ POWER_SUPPLY_ATTR(ENERGY_EMPTY_DESIGN),
+ POWER_SUPPLY_ATTR(ENERGY_FULL),
+ POWER_SUPPLY_ATTR(ENERGY_EMPTY),
+ POWER_SUPPLY_ATTR(ENERGY_NOW),
+ POWER_SUPPLY_ATTR(ENERGY_AVG),
+ POWER_SUPPLY_ATTR(CAPACITY),
+ POWER_SUPPLY_ATTR(CAPACITY_ALERT_MIN),
+ POWER_SUPPLY_ATTR(CAPACITY_ALERT_MAX),
+ POWER_SUPPLY_ENUM_ATTR(CAPACITY_LEVEL),
+ POWER_SUPPLY_ATTR(TEMP),
+ POWER_SUPPLY_ATTR(TEMP_MAX),
+ POWER_SUPPLY_ATTR(TEMP_MIN),
+ POWER_SUPPLY_ATTR(TEMP_ALERT_MIN),
+ POWER_SUPPLY_ATTR(TEMP_ALERT_MAX),
+ POWER_SUPPLY_ATTR(TEMP_AMBIENT),
+ POWER_SUPPLY_ATTR(TEMP_AMBIENT_ALERT_MIN),
+ POWER_SUPPLY_ATTR(TEMP_AMBIENT_ALERT_MAX),
+ POWER_SUPPLY_ATTR(TIME_TO_EMPTY_NOW),
+ POWER_SUPPLY_ATTR(TIME_TO_EMPTY_AVG),
+ POWER_SUPPLY_ATTR(TIME_TO_FULL_NOW),
+ POWER_SUPPLY_ATTR(TIME_TO_FULL_AVG),
+ POWER_SUPPLY_ENUM_ATTR(TYPE),
+ POWER_SUPPLY_ATTR(USB_TYPE),
+ POWER_SUPPLY_ENUM_ATTR(SCOPE),
+ POWER_SUPPLY_ATTR(PRECHARGE_CURRENT),
+ POWER_SUPPLY_ATTR(CHARGE_TERM_CURRENT),
+ POWER_SUPPLY_ATTR(CALIBRATE),
+ /* Properties of type `const char *' */
+ POWER_SUPPLY_ATTR(MODEL_NAME),
+ POWER_SUPPLY_ATTR(MANUFACTURER),
+ POWER_SUPPLY_ATTR(SERIAL_NUMBER),
};
+static struct attribute *
+__power_supply_attrs[ARRAY_SIZE(power_supply_attrs) + 1];
+
+static struct power_supply_attr *to_ps_attr(struct device_attribute *attr)
+{
+ return container_of(attr, struct power_supply_attr, dev_attr);
+}
+
+static enum power_supply_property dev_attr_psp(struct device_attribute *attr)
+{
+ return to_ps_attr(attr) - power_supply_attrs;
+}
+
static ssize_t power_supply_show_usb_type(struct device *dev,
- enum power_supply_usb_type *usb_types,
- ssize_t num_usb_types,
+ const struct power_supply_desc *desc,
union power_supply_propval *value,
char *buf)
{
@@ -88,16 +226,16 @@ static ssize_t power_supply_show_usb_type(struct device *dev,
bool match = false;
int i;
- for (i = 0; i < num_usb_types; ++i) {
- usb_type = usb_types[i];
+ for (i = 0; i < desc->num_usb_types; ++i) {
+ usb_type = desc->usb_types[i];
if (value->intval == usb_type) {
count += sprintf(buf + count, "[%s] ",
- power_supply_usb_type_text[usb_type]);
+ POWER_SUPPLY_USB_TYPE_TEXT[usb_type]);
match = true;
} else {
count += sprintf(buf + count, "%s ",
- power_supply_usb_type_text[usb_type]);
+ POWER_SUPPLY_USB_TYPE_TEXT[usb_type]);
}
}
@@ -117,7 +255,8 @@ static ssize_t power_supply_show_property(struct device *dev,
char *buf) {
ssize_t ret;
struct power_supply *psy = dev_get_drvdata(dev);
- enum power_supply_property psp = attr - power_supply_attrs;
+ struct power_supply_attr *ps_attr = to_ps_attr(attr);
+ enum power_supply_property psp = dev_attr_psp(attr);
union power_supply_propval value;
if (psp == POWER_SUPPLY_PROP_TYPE) {
@@ -137,39 +276,15 @@ static ssize_t power_supply_show_property(struct device *dev,
}
}
+ if (ps_attr->text_values_len > 0 &&
+ value.intval < ps_attr->text_values_len && value.intval >= 0) {
+ return sprintf(buf, "%s\n", ps_attr->text_values[value.intval]);
+ }
+
switch (psp) {
- case POWER_SUPPLY_PROP_STATUS:
- ret = sprintf(buf, "%s\n",
- power_supply_status_text[value.intval]);
- break;
- case POWER_SUPPLY_PROP_CHARGE_TYPE:
- ret = sprintf(buf, "%s\n",
- power_supply_charge_type_text[value.intval]);
- break;
- case POWER_SUPPLY_PROP_HEALTH:
- ret = sprintf(buf, "%s\n",
- power_supply_health_text[value.intval]);
- break;
- case POWER_SUPPLY_PROP_TECHNOLOGY:
- ret = sprintf(buf, "%s\n",
- power_supply_technology_text[value.intval]);
- break;
- case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
- ret = sprintf(buf, "%s\n",
- power_supply_capacity_level_text[value.intval]);
- break;
- case POWER_SUPPLY_PROP_TYPE:
- ret = sprintf(buf, "%s\n",
- power_supply_type_text[value.intval]);
- break;
case POWER_SUPPLY_PROP_USB_TYPE:
- ret = power_supply_show_usb_type(dev, psy->desc->usb_types,
- psy->desc->num_usb_types,
- &value, buf);
- break;
- case POWER_SUPPLY_PROP_SCOPE:
- ret = sprintf(buf, "%s\n",
- power_supply_scope_text[value.intval]);
+ ret = power_supply_show_usb_type(dev, psy->desc,
+ &value, buf);
break;
case POWER_SUPPLY_PROP_MODEL_NAME ... POWER_SUPPLY_PROP_SERIAL_NUMBER:
ret = sprintf(buf, "%s\n", value.strval);
@@ -186,30 +301,14 @@ static ssize_t power_supply_store_property(struct device *dev,
const char *buf, size_t count) {
ssize_t ret;
struct power_supply *psy = dev_get_drvdata(dev);
- enum power_supply_property psp = attr - power_supply_attrs;
+ struct power_supply_attr *ps_attr = to_ps_attr(attr);
+ enum power_supply_property psp = dev_attr_psp(attr);
union power_supply_propval value;
- switch (psp) {
- case POWER_SUPPLY_PROP_STATUS:
- ret = sysfs_match_string(power_supply_status_text, buf);
- break;
- case POWER_SUPPLY_PROP_CHARGE_TYPE:
- ret = sysfs_match_string(power_supply_charge_type_text, buf);
- break;
- case POWER_SUPPLY_PROP_HEALTH:
- ret = sysfs_match_string(power_supply_health_text, buf);
- break;
- case POWER_SUPPLY_PROP_TECHNOLOGY:
- ret = sysfs_match_string(power_supply_technology_text, buf);
- break;
- case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
- ret = sysfs_match_string(power_supply_capacity_level_text, buf);
- break;
- case POWER_SUPPLY_PROP_SCOPE:
- ret = sysfs_match_string(power_supply_scope_text, buf);
- break;
- default:
- ret = -EINVAL;
+ ret = -EINVAL;
+ if (ps_attr->text_values_len > 0) {
+ ret = __sysfs_match_string(ps_attr->text_values,
+ ps_attr->text_values_len, buf);
}
/*
@@ -235,86 +334,6 @@ static ssize_t power_supply_store_property(struct device *dev,
return count;
}
-/* Must be in the same order as POWER_SUPPLY_PROP_* */
-static struct device_attribute power_supply_attrs[] = {
- /* Properties of type `int' */
- POWER_SUPPLY_ATTR(status),
- POWER_SUPPLY_ATTR(charge_type),
- POWER_SUPPLY_ATTR(health),
- POWER_SUPPLY_ATTR(present),
- POWER_SUPPLY_ATTR(online),
- POWER_SUPPLY_ATTR(authentic),
- POWER_SUPPLY_ATTR(technology),
- POWER_SUPPLY_ATTR(cycle_count),
- POWER_SUPPLY_ATTR(voltage_max),
- POWER_SUPPLY_ATTR(voltage_min),
- POWER_SUPPLY_ATTR(voltage_max_design),
- POWER_SUPPLY_ATTR(voltage_min_design),
- POWER_SUPPLY_ATTR(voltage_now),
- POWER_SUPPLY_ATTR(voltage_avg),
- POWER_SUPPLY_ATTR(voltage_ocv),
- POWER_SUPPLY_ATTR(voltage_boot),
- POWER_SUPPLY_ATTR(current_max),
- POWER_SUPPLY_ATTR(current_now),
- POWER_SUPPLY_ATTR(current_avg),
- POWER_SUPPLY_ATTR(current_boot),
- POWER_SUPPLY_ATTR(power_now),
- POWER_SUPPLY_ATTR(power_avg),
- POWER_SUPPLY_ATTR(charge_full_design),
- POWER_SUPPLY_ATTR(charge_empty_design),
- POWER_SUPPLY_ATTR(charge_full),
- POWER_SUPPLY_ATTR(charge_empty),
- POWER_SUPPLY_ATTR(charge_now),
- POWER_SUPPLY_ATTR(charge_avg),
- POWER_SUPPLY_ATTR(charge_counter),
- POWER_SUPPLY_ATTR(constant_charge_current),
- POWER_SUPPLY_ATTR(constant_charge_current_max),
- POWER_SUPPLY_ATTR(constant_charge_voltage),
- POWER_SUPPLY_ATTR(constant_charge_voltage_max),
- POWER_SUPPLY_ATTR(charge_control_limit),
- POWER_SUPPLY_ATTR(charge_control_limit_max),
- POWER_SUPPLY_ATTR(charge_control_start_threshold),
- POWER_SUPPLY_ATTR(charge_control_end_threshold),
- POWER_SUPPLY_ATTR(input_current_limit),
- POWER_SUPPLY_ATTR(input_voltage_limit),
- POWER_SUPPLY_ATTR(input_power_limit),
- POWER_SUPPLY_ATTR(energy_full_design),
- POWER_SUPPLY_ATTR(energy_empty_design),
- POWER_SUPPLY_ATTR(energy_full),
- POWER_SUPPLY_ATTR(energy_empty),
- POWER_SUPPLY_ATTR(energy_now),
- POWER_SUPPLY_ATTR(energy_avg),
- POWER_SUPPLY_ATTR(capacity),
- POWER_SUPPLY_ATTR(capacity_alert_min),
- POWER_SUPPLY_ATTR(capacity_alert_max),
- POWER_SUPPLY_ATTR(capacity_level),
- POWER_SUPPLY_ATTR(temp),
- POWER_SUPPLY_ATTR(temp_max),
- POWER_SUPPLY_ATTR(temp_min),
- POWER_SUPPLY_ATTR(temp_alert_min),
- POWER_SUPPLY_ATTR(temp_alert_max),
- POWER_SUPPLY_ATTR(temp_ambient),
- POWER_SUPPLY_ATTR(temp_ambient_alert_min),
- POWER_SUPPLY_ATTR(temp_ambient_alert_max),
- POWER_SUPPLY_ATTR(time_to_empty_now),
- POWER_SUPPLY_ATTR(time_to_empty_avg),
- POWER_SUPPLY_ATTR(time_to_full_now),
- POWER_SUPPLY_ATTR(time_to_full_avg),
- POWER_SUPPLY_ATTR(type),
- POWER_SUPPLY_ATTR(usb_type),
- POWER_SUPPLY_ATTR(scope),
- POWER_SUPPLY_ATTR(precharge_current),
- POWER_SUPPLY_ATTR(charge_term_current),
- POWER_SUPPLY_ATTR(calibrate),
- /* Properties of type `const char *' */
- POWER_SUPPLY_ATTR(model_name),
- POWER_SUPPLY_ATTR(manufacturer),
- POWER_SUPPLY_ATTR(serial_number),
-};
-
-static struct attribute *
-__power_supply_attrs[ARRAY_SIZE(power_supply_attrs) + 1];
-
static umode_t power_supply_attr_is_visible(struct kobject *kobj,
struct attribute *attr,
int attrno)
@@ -324,6 +343,9 @@ static umode_t power_supply_attr_is_visible(struct kobject *kobj,
umode_t mode = S_IRUSR | S_IRGRP | S_IROTH;
int i;
+ if (!power_supply_attrs[attrno].prop_name)
+ return 0;
+
if (attrno == POWER_SUPPLY_PROP_TYPE)
return mode;
@@ -352,31 +374,69 @@ static const struct attribute_group *power_supply_attr_groups[] = {
NULL,
};
+static void str_to_lower(char *str)
+{
+ while (*str) {
+ *str = tolower(*str);
+ str++;
+ }
+}
+
void power_supply_init_attrs(struct device_type *dev_type)
{
int i;
dev_type->groups = power_supply_attr_groups;
- for (i = 0; i < ARRAY_SIZE(power_supply_attrs); i++)
- __power_supply_attrs[i] = &power_supply_attrs[i].attr;
-}
+ for (i = 0; i < ARRAY_SIZE(power_supply_attrs); i++) {
+ struct device_attribute *attr;
-static char *kstruprdup(const char *str, gfp_t gfp)
-{
- char *ret, *ustr;
+ if (!power_supply_attrs[i].prop_name) {
+ pr_warn("%s: Property %d skipped because is is missing from power_supply_attrs\n",
+ __func__, i);
+ sprintf(power_supply_attrs[i].attr_name, "_err_%d", i);
+ } else {
+ str_to_lower(power_supply_attrs[i].attr_name);
+ }
- ustr = ret = kmalloc(strlen(str) + 1, gfp);
+ attr = &power_supply_attrs[i].dev_attr;
- if (!ret)
- return NULL;
+ attr->attr.name = power_supply_attrs[i].attr_name;
+ attr->show = power_supply_show_property;
+ attr->store = power_supply_store_property;
+ __power_supply_attrs[i] = &attr->attr;
+ }
+}
+
+static int add_prop_uevent(struct device *dev, struct kobj_uevent_env *env,
+ enum power_supply_property prop, char *prop_buf)
+{
+ int ret = 0;
+ struct power_supply_attr *pwr_attr;
+ struct device_attribute *dev_attr;
+ char *line;
+
+ pwr_attr = &power_supply_attrs[prop];
+ dev_attr = &pwr_attr->dev_attr;
+
+ ret = power_supply_show_property(dev, dev_attr, prop_buf);
+ if (ret == -ENODEV || ret == -ENODATA) {
+ /*
+ * When a battery is absent, we expect -ENODEV. Don't abort;
+ * send the uevent with at least the the PRESENT=0 property
+ */
+ return 0;
+ }
- while (*str)
- *ustr++ = toupper(*str++);
+ if (ret < 0)
+ return ret;
- *ustr = 0;
+ line = strchr(prop_buf, '\n');
+ if (line)
+ *line = 0;
- return ret;
+ return add_uevent_var(env, "POWER_SUPPLY_%s=%s",
+ pwr_attr->prop_name, prop_buf);
}
int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env)
@@ -384,7 +444,6 @@ int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env)
struct power_supply *psy = dev_get_drvdata(dev);
int ret = 0, j;
char *prop_buf;
- char *attrname;
if (!psy || !psy->desc) {
dev_dbg(dev, "No power supply yet\n");
@@ -399,35 +458,13 @@ int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env)
if (!prop_buf)
return -ENOMEM;
- for (j = 0; j < psy->desc->num_properties; j++) {
- struct device_attribute *attr;
- char *line;
-
- attr = &power_supply_attrs[psy->desc->properties[j]];
-
- ret = power_supply_show_property(dev, attr, prop_buf);
- if (ret == -ENODEV || ret == -ENODATA) {
- /* When a battery is absent, we expect -ENODEV. Don't abort;
- send the uevent with at least the the PRESENT=0 property */
- ret = 0;
- continue;
- }
-
- if (ret < 0)
- goto out;
-
- line = strchr(prop_buf, '\n');
- if (line)
- *line = 0;
-
- attrname = kstruprdup(attr->attr.name, GFP_KERNEL);
- if (!attrname) {
- ret = -ENOMEM;
- goto out;
- }
+ ret = add_prop_uevent(dev, env, POWER_SUPPLY_PROP_TYPE, prop_buf);
+ if (ret)
+ goto out;
- ret = add_uevent_var(env, "POWER_SUPPLY_%s=%s", attrname, prop_buf);
- kfree(attrname);
+ for (j = 0; j < psy->desc->num_properties; j++) {
+ ret = add_prop_uevent(dev, env, psy->desc->properties[j],
+ prop_buf);
if (ret)
goto out;
}
diff --git a/drivers/power/supply/sc27xx_fuel_gauge.c b/drivers/power/supply/sc27xx_fuel_gauge.c
index a7c8a8453db1..be42e814ea34 100644
--- a/drivers/power/supply/sc27xx_fuel_gauge.c
+++ b/drivers/power/supply/sc27xx_fuel_gauge.c
@@ -42,6 +42,8 @@
#define SC27XX_FGU_USER_AREA_SET 0xa0
#define SC27XX_FGU_USER_AREA_CLEAR 0xa4
#define SC27XX_FGU_USER_AREA_STATUS 0xa8
+#define SC27XX_FGU_VOLTAGE_BUF 0xd0
+#define SC27XX_FGU_CURRENT_BUF 0xf0
#define SC27XX_WRITE_SELCLB_EN BIT(0)
#define SC27XX_FGU_CLBCNT_MASK GENMASK(15, 0)
@@ -82,6 +84,7 @@
* @init_clbcnt: the initial coulomb counter
* @max_volt: the maximum constant input voltage in millivolt
* @min_volt: the minimum drained battery voltage in microvolt
+ * @boot_volt: the voltage measured during boot in microvolt
* @table_len: the capacity table length
* @resist_table_len: the resistance table length
* @cur_1000ma_adc: ADC value corresponding to 1000 mA
@@ -107,6 +110,7 @@ struct sc27xx_fgu_data {
int init_clbcnt;
int max_volt;
int min_volt;
+ int boot_volt;
int table_len;
int resist_table_len;
int cur_1000ma_adc;
@@ -319,6 +323,7 @@ static int sc27xx_fgu_get_boot_capacity(struct sc27xx_fgu_data *data, int *cap)
volt = sc27xx_fgu_adc_to_voltage(data, volt);
ocv = volt * 1000 - oci * data->internal_resist;
+ data->boot_volt = ocv;
/*
* Parse the capacity table to look up the correct capacity percent
@@ -376,6 +381,44 @@ static int sc27xx_fgu_get_clbcnt(struct sc27xx_fgu_data *data, int *clb_cnt)
return 0;
}
+static int sc27xx_fgu_get_vol_now(struct sc27xx_fgu_data *data, int *val)
+{
+ int ret;
+ u32 vol;
+
+ ret = regmap_read(data->regmap, data->base + SC27XX_FGU_VOLTAGE_BUF,
+ &vol);
+ if (ret)
+ return ret;
+
+ /*
+ * It is ADC values reading from registers which need to convert to
+ * corresponding voltage values.
+ */
+ *val = sc27xx_fgu_adc_to_voltage(data, vol);
+
+ return 0;
+}
+
+static int sc27xx_fgu_get_cur_now(struct sc27xx_fgu_data *data, int *val)
+{
+ int ret;
+ u32 cur;
+
+ ret = regmap_read(data->regmap, data->base + SC27XX_FGU_CURRENT_BUF,
+ &cur);
+ if (ret)
+ return ret;
+
+ /*
+ * It is ADC values reading from registers which need to convert to
+ * corresponding current values.
+ */
+ *val = sc27xx_fgu_adc_to_current(data, cur - SC27XX_FGU_CUR_BASIC_ADC);
+
+ return 0;
+}
+
static int sc27xx_fgu_get_capacity(struct sc27xx_fgu_data *data, int *cap)
{
int ret, cur_clbcnt, delta_clbcnt, delta_cap, temp;
@@ -577,7 +620,7 @@ static int sc27xx_fgu_get_property(struct power_supply *psy,
val->intval = value;
break;
- case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
ret = sc27xx_fgu_get_vbat_vol(data, &value);
if (ret)
goto error;
@@ -601,7 +644,6 @@ static int sc27xx_fgu_get_property(struct power_supply *psy,
val->intval = value;
break;
- case POWER_SUPPLY_PROP_CURRENT_NOW:
case POWER_SUPPLY_PROP_CURRENT_AVG:
ret = sc27xx_fgu_get_current(data, &value);
if (ret)
@@ -625,6 +667,26 @@ static int sc27xx_fgu_get_property(struct power_supply *psy,
break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = sc27xx_fgu_get_vol_now(data, &value);
+ if (ret)
+ goto error;
+
+ val->intval = value * 1000;
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = sc27xx_fgu_get_cur_now(data, &value);
+ if (ret)
+ goto error;
+
+ val->intval = value * 1000;
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_BOOT:
+ val->intval = data->boot_volt;
+ break;
+
default:
ret = -EINVAL;
break;
@@ -656,6 +718,11 @@ static int sc27xx_fgu_set_property(struct power_supply *psy,
ret = 0;
break;
+ case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
+ data->total_cap = val->intval / 1000;
+ ret = 0;
+ break;
+
default:
ret = -EINVAL;
}
@@ -676,7 +743,8 @@ static int sc27xx_fgu_property_is_writeable(struct power_supply *psy,
enum power_supply_property psp)
{
return psp == POWER_SUPPLY_PROP_CAPACITY ||
- psp == POWER_SUPPLY_PROP_CALIBRATE;
+ psp == POWER_SUPPLY_PROP_CALIBRATE ||
+ psp == POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN;
}
static enum power_supply_property sc27xx_fgu_props[] = {
@@ -688,6 +756,8 @@ static enum power_supply_property sc27xx_fgu_props[] = {
POWER_SUPPLY_PROP_CAPACITY,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_VOLTAGE_OCV,
+ POWER_SUPPLY_PROP_VOLTAGE_AVG,
+ POWER_SUPPLY_PROP_VOLTAGE_BOOT,
POWER_SUPPLY_PROP_CURRENT_NOW,
POWER_SUPPLY_PROP_CURRENT_AVG,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
@@ -705,6 +775,7 @@ static const struct power_supply_desc sc27xx_fgu_desc = {
.set_property = sc27xx_fgu_set_property,
.external_power_changed = sc27xx_fgu_external_power_changed,
.property_is_writeable = sc27xx_fgu_property_is_writeable,
+ .no_thermal = true,
};
static void sc27xx_fgu_adjust_cap(struct sc27xx_fgu_data *data, int cap)
diff --git a/drivers/power/supply/smb347-charger.c b/drivers/power/supply/smb347-charger.c
index c1d124b8be0c..f99026d81f2a 100644
--- a/drivers/power/supply/smb347-charger.c
+++ b/drivers/power/supply/smb347-charger.c
@@ -8,6 +8,7 @@
* Mika Westerberg <mika.westerberg@linux.intel.com>
*/
+#include <linux/delay.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
@@ -708,6 +709,9 @@ static irqreturn_t smb347_interrupt(int irq, void *data)
bool handled = false;
int ret;
+ /* SMB347 it needs at least 20ms for setting IRQSTAT_E_*IN_UV_IRQ */
+ usleep_range(25000, 35000);
+
ret = regmap_read(smb->regmap, STAT_C, &stat_c);
if (ret < 0) {
dev_warn(smb->dev, "reading STAT_C failed\n");
@@ -1138,6 +1142,7 @@ static bool smb347_volatile_reg(struct device *dev, unsigned int reg)
switch (reg) {
case IRQSTAT_A:
case IRQSTAT_C:
+ case IRQSTAT_D:
case IRQSTAT_E:
case IRQSTAT_F:
case STAT_A: