diff options
Diffstat (limited to 'drivers/power')
| -rw-r--r-- | drivers/power/reset/Kconfig | 23 | ||||
| -rw-r--r-- | drivers/power/reset/Makefile | 3 | ||||
| -rw-r--r-- | drivers/power/reset/axxia-reset.c | 88 | ||||
| -rw-r--r-- | drivers/power/reset/keystone-reset.c | 166 | ||||
| -rw-r--r-- | drivers/power/reset/sun6i-reboot.c | 85 | ||||
| -rw-r--r-- | drivers/power/reset/vexpress-poweroff.c | 16 |
6 files changed, 373 insertions, 8 deletions
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index fa0e4e057b99..bdcf5173e377 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -12,6 +12,14 @@ config POWER_RESET_AS3722 help This driver supports turning off board via a ams AS3722 power-off. +config POWER_RESET_AXXIA + bool "LSI Axxia reset driver" + depends on POWER_RESET && ARCH_AXXIA + help + This driver supports restart for Axxia SoC. + + Say Y if you have an Axxia family SoC. + config POWER_RESET_GPIO bool "GPIO power-off driver" depends on OF_GPIO && POWER_RESET @@ -43,6 +51,13 @@ config POWER_RESET_RESTART Instead they restart, and u-boot holds the SoC until the user presses a key. u-boot then boots into Linux. +config POWER_RESET_SUN6I + bool "Allwinner A31 SoC reset driver" + depends on ARCH_SUNXI + depends on POWER_RESET + help + Reboot support for the Allwinner A31 SoCs. + config POWER_RESET_VEXPRESS bool "ARM Versatile Express power-off and reset driver" depends on ARM || ARM64 @@ -57,3 +72,11 @@ config POWER_RESET_XGENE depends on POWER_RESET help Reboot support for the APM SoC X-Gene Eval boards. + +config POWER_RESET_KEYSTONE + bool "Keystone reset driver" + depends on ARCH_KEYSTONE + select MFD_SYSCON + help + Reboot support for the KEYSTONE SoCs. + diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile index a5b4a77d1a41..dde2e8bbac53 100644 --- a/drivers/power/reset/Makefile +++ b/drivers/power/reset/Makefile @@ -1,7 +1,10 @@ obj-$(CONFIG_POWER_RESET_AS3722) += as3722-poweroff.o +obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o +obj-$(CONFIG_POWER_RESET_SUN6I) += sun6i-reboot.o obj-$(CONFIG_POWER_RESET_VEXPRESS) += vexpress-poweroff.o obj-$(CONFIG_POWER_RESET_XGENE) += xgene-reboot.o +obj-$(CONFIG_POWER_RESET_KEYSTONE) += keystone-reset.o diff --git a/drivers/power/reset/axxia-reset.c b/drivers/power/reset/axxia-reset.c new file mode 100644 index 000000000000..3b1f8d601784 --- /dev/null +++ b/drivers/power/reset/axxia-reset.c @@ -0,0 +1,88 @@ +/* + * Reset driver for Axxia devices + * + * Copyright (C) 2014 LSI + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#include <linux/init.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/reboot.h> +#include <linux/regmap.h> + +#include <asm/system_misc.h> + + +#define SC_CRIT_WRITE_KEY 0x1000 +#define SC_LATCH_ON_RESET 0x1004 +#define SC_RESET_CONTROL 0x1008 +#define RSTCTL_RST_ZERO (1<<3) +#define RSTCTL_RST_FAB (1<<2) +#define RSTCTL_RST_CHIP (1<<1) +#define RSTCTL_RST_SYS (1<<0) +#define SC_EFUSE_INT_STATUS 0x180c +#define EFUSE_READ_DONE (1<<31) + +static struct regmap *syscon; + +static void do_axxia_restart(enum reboot_mode reboot_mode, const char *cmd) +{ + /* Access Key (0xab) */ + regmap_write(syscon, SC_CRIT_WRITE_KEY, 0xab); + /* Select internal boot from 0xffff0000 */ + regmap_write(syscon, SC_LATCH_ON_RESET, 0x00000040); + /* Assert ResetReadDone (to avoid hanging in boot ROM) */ + regmap_write(syscon, SC_EFUSE_INT_STATUS, EFUSE_READ_DONE); + /* Assert chip reset */ + regmap_update_bits(syscon, SC_RESET_CONTROL, + RSTCTL_RST_CHIP, RSTCTL_RST_CHIP); +} + +static int axxia_reset_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + + syscon = syscon_regmap_lookup_by_phandle(dev->of_node, "syscon"); + if (IS_ERR(syscon)) { + pr_err("%s: syscon lookup failed\n", dev->of_node->name); + return PTR_ERR(syscon); + } + + arm_pm_restart = do_axxia_restart; + + return 0; +} + +static const struct of_device_id of_axxia_reset_match[] = { + { .compatible = "lsi,axm55xx-reset", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_axxia_reset_match); + +static struct platform_driver axxia_reset_driver = { + .probe = axxia_reset_probe, + .driver = { + .name = "axxia-reset", + .of_match_table = of_match_ptr(of_axxia_reset_match), + }, +}; + +static int __init axxia_reset_init(void) +{ + return platform_driver_register(&axxia_reset_driver); +} +device_initcall(axxia_reset_init); diff --git a/drivers/power/reset/keystone-reset.c b/drivers/power/reset/keystone-reset.c new file mode 100644 index 000000000000..408a18fd91cb --- /dev/null +++ b/drivers/power/reset/keystone-reset.c @@ -0,0 +1,166 @@ +/* + * TI keystone reboot driver + * + * Copyright (C) 2014 Texas Instruments Incorporated. http://www.ti.com/ + * + * Author: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/reboot.h> +#include <linux/regmap.h> +#include <asm/system_misc.h> +#include <linux/mfd/syscon.h> +#include <linux/of_platform.h> + +#define RSTYPE_RG 0x0 +#define RSCTRL_RG 0x4 +#define RSCFG_RG 0x8 +#define RSISO_RG 0xc + +#define RSCTRL_KEY_MASK 0x0000ffff +#define RSCTRL_RESET_MASK BIT(16) +#define RSCTRL_KEY 0x5a69 + +#define RSMUX_OMODE_MASK 0xe +#define RSMUX_OMODE_RESET_ON 0xa +#define RSMUX_OMODE_RESET_OFF 0x0 +#define RSMUX_LOCK_MASK 0x1 +#define RSMUX_LOCK_SET 0x1 + +#define RSCFG_RSTYPE_SOFT 0x300f +#define RSCFG_RSTYPE_HARD 0x0 + +#define WDT_MUX_NUMBER 0x4 + +static int rspll_offset; +static struct regmap *pllctrl_regs; + +/** + * rsctrl_enable_rspll_write - enable access to RSCTRL, RSCFG + * To be able to access to RSCTRL, RSCFG registers + * we have to write a key before + */ +static inline int rsctrl_enable_rspll_write(void) +{ + return regmap_update_bits(pllctrl_regs, rspll_offset + RSCTRL_RG, + RSCTRL_KEY_MASK, RSCTRL_KEY); +} + +static void rsctrl_restart(enum reboot_mode mode, const char *cmd) +{ + /* enable write access to RSTCTRL */ + rsctrl_enable_rspll_write(); + + /* reset the SOC */ + regmap_update_bits(pllctrl_regs, rspll_offset + RSCTRL_RG, + RSCTRL_RESET_MASK, 0); +} + +static struct of_device_id rsctrl_of_match[] = { + {.compatible = "ti,keystone-reset", }, + {}, +}; + +static int rsctrl_probe(struct platform_device *pdev) +{ + int i; + int ret; + u32 val; + unsigned int rg; + u32 rsmux_offset; + struct regmap *devctrl_regs; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + + if (!np) + return -ENODEV; + + /* get regmaps */ + pllctrl_regs = syscon_regmap_lookup_by_phandle(np, "ti,syscon-pll"); + if (IS_ERR(pllctrl_regs)) + return PTR_ERR(pllctrl_regs); + + devctrl_regs = syscon_regmap_lookup_by_phandle(np, "ti,syscon-dev"); + if (IS_ERR(devctrl_regs)) + return PTR_ERR(devctrl_regs); + + ret = of_property_read_u32_index(np, "ti,syscon-pll", 1, &rspll_offset); + if (ret) { + dev_err(dev, "couldn't read the reset pll offset!\n"); + return -EINVAL; + } + + ret = of_property_read_u32_index(np, "ti,syscon-dev", 1, &rsmux_offset); + if (ret) { + dev_err(dev, "couldn't read the rsmux offset!\n"); + return -EINVAL; + } + + /* set soft/hard reset */ + val = of_property_read_bool(np, "ti,soft-reset"); + val = val ? RSCFG_RSTYPE_SOFT : RSCFG_RSTYPE_HARD; + + ret = rsctrl_enable_rspll_write(); + if (ret) + return ret; + + ret = regmap_write(pllctrl_regs, rspll_offset + RSCFG_RG, val); + if (ret) + return ret; + + arm_pm_restart = rsctrl_restart; + + /* disable a reset isolation for all module clocks */ + ret = regmap_write(pllctrl_regs, rspll_offset + RSISO_RG, 0); + if (ret) + return ret; + + /* enable a reset for watchdogs from wdt-list */ + for (i = 0; i < WDT_MUX_NUMBER; i++) { + ret = of_property_read_u32_index(np, "ti,wdt-list", i, &val); + if (ret == -EOVERFLOW && !i) { + dev_err(dev, "ti,wdt-list property has to contain at" + "least one entry\n"); + return -EINVAL; + } else if (ret) { + break; + } + + if (val >= WDT_MUX_NUMBER) { + dev_err(dev, "ti,wdt-list property can contain" + "only numbers < 4\n"); + return -EINVAL; + } + + rg = rsmux_offset + val * 4; + + ret = regmap_update_bits(devctrl_regs, rg, RSMUX_OMODE_MASK, + RSMUX_OMODE_RESET_ON | + RSMUX_LOCK_SET); + if (ret) + return ret; + } + + return 0; +} + +static struct platform_driver rsctrl_driver = { + .probe = rsctrl_probe, + .driver = { + .owner = THIS_MODULE, + .name = KBUILD_MODNAME, + .of_match_table = rsctrl_of_match, + }, +}; +module_platform_driver(rsctrl_driver); + +MODULE_AUTHOR("Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>"); +MODULE_DESCRIPTION("Texas Instruments keystone reset driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" KBUILD_MODNAME); diff --git a/drivers/power/reset/sun6i-reboot.c b/drivers/power/reset/sun6i-reboot.c new file mode 100644 index 000000000000..af2cd7ff2fe8 --- /dev/null +++ b/drivers/power/reset/sun6i-reboot.c @@ -0,0 +1,85 @@ +/* + * Allwinner A31 SoCs reset code + * + * Copyright (C) 2012-2014 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/reboot.h> + +#include <asm/system_misc.h> + +#define SUN6I_WATCHDOG1_IRQ_REG 0x00 +#define SUN6I_WATCHDOG1_CTRL_REG 0x10 +#define SUN6I_WATCHDOG1_CTRL_RESTART BIT(0) +#define SUN6I_WATCHDOG1_CONFIG_REG 0x14 +#define SUN6I_WATCHDOG1_CONFIG_RESTART BIT(0) +#define SUN6I_WATCHDOG1_CONFIG_IRQ BIT(1) +#define SUN6I_WATCHDOG1_MODE_REG 0x18 +#define SUN6I_WATCHDOG1_MODE_ENABLE BIT(0) + +static void __iomem *wdt_base; + +static void sun6i_wdt_restart(enum reboot_mode mode, const char *cmd) +{ + if (!wdt_base) + return; + + /* Disable interrupts */ + writel(0, wdt_base + SUN6I_WATCHDOG1_IRQ_REG); + + /* We want to disable the IRQ and just reset the whole system */ + writel(SUN6I_WATCHDOG1_CONFIG_RESTART, + wdt_base + SUN6I_WATCHDOG1_CONFIG_REG); + + /* Enable timer. The default and lowest interval value is 0.5s */ + writel(SUN6I_WATCHDOG1_MODE_ENABLE, + wdt_base + SUN6I_WATCHDOG1_MODE_REG); + + /* Restart the watchdog. */ + writel(SUN6I_WATCHDOG1_CTRL_RESTART, + wdt_base + SUN6I_WATCHDOG1_CTRL_REG); + + while (1) { + mdelay(5); + writel(SUN6I_WATCHDOG1_MODE_ENABLE, + wdt_base + SUN6I_WATCHDOG1_MODE_REG); + } +} + +static int sun6i_reboot_probe(struct platform_device *pdev) +{ + wdt_base = of_iomap(pdev->dev.of_node, 0); + if (!wdt_base) { + WARN(1, "failed to map watchdog base address"); + return -ENODEV; + } + + arm_pm_restart = sun6i_wdt_restart; + + return 0; +} + +static struct of_device_id sun6i_reboot_of_match[] = { + { .compatible = "allwinner,sun6i-a31-wdt" }, + {} +}; + +static struct platform_driver sun6i_reboot_driver = { + .probe = sun6i_reboot_probe, + .driver = { + .name = "sun6i-reboot", + .of_match_table = sun6i_reboot_of_match, + }, +}; +module_platform_driver(sun6i_reboot_driver); diff --git a/drivers/power/reset/vexpress-poweroff.c b/drivers/power/reset/vexpress-poweroff.c index b95cf71ed695..4dc102e2b230 100644 --- a/drivers/power/reset/vexpress-poweroff.c +++ b/drivers/power/reset/vexpress-poweroff.c @@ -23,10 +23,10 @@ static void vexpress_reset_do(struct device *dev, const char *what) { int err = -ENOENT; - struct vexpress_config_func *func = dev_get_drvdata(dev); + struct regmap *reg = dev_get_drvdata(dev); - if (func) { - err = vexpress_config_write(func, 0, 0); + if (reg) { + err = regmap_write(reg, 0, 0); if (!err) mdelay(1000); } @@ -91,17 +91,17 @@ static int vexpress_reset_probe(struct platform_device *pdev) enum vexpress_reset_func func; const struct of_device_id *match = of_match_device(vexpress_reset_of_match, &pdev->dev); - struct vexpress_config_func *config_func; + struct regmap *regmap; if (match) func = (enum vexpress_reset_func)match->data; else func = pdev->id_entry->driver_data; - config_func = vexpress_config_func_get_by_dev(&pdev->dev); - if (!config_func) - return -EINVAL; - dev_set_drvdata(&pdev->dev, config_func); + regmap = devm_regmap_init_vexpress_config(&pdev->dev); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + dev_set_drvdata(&pdev->dev, regmap); switch (func) { case FUNC_SHUTDOWN: |