summaryrefslogtreecommitdiffstats
path: root/drivers/power/supply/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/power/supply/Kconfig')
-rw-r--r--drivers/power/supply/Kconfig514
1 files changed, 514 insertions, 0 deletions
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
new file mode 100644
index 000000000000..76806a0be820
--- /dev/null
+++ b/drivers/power/supply/Kconfig
@@ -0,0 +1,514 @@
+menuconfig POWER_SUPPLY
+ bool "Power supply class support"
+ help
+ Say Y here to enable power supply class support. This allows
+ power supply (batteries, AC, USB) monitoring by userspace
+ via sysfs and uevent (if available) and/or APM kernel interface
+ (if selected below).
+
+if POWER_SUPPLY
+
+config POWER_SUPPLY_DEBUG
+ bool "Power supply debug"
+ help
+ Say Y here to enable debugging messages for power supply class
+ and drivers.
+
+config PDA_POWER
+ tristate "Generic PDA/phone power driver"
+ depends on !S390
+ help
+ Say Y here to enable generic power driver for PDAs and phones with
+ one or two external power supplies (AC/USB) connected to main and
+ backup batteries, and optional builtin charger.
+
+config APM_POWER
+ tristate "APM emulation for class batteries"
+ depends on APM_EMULATION
+ help
+ Say Y here to enable support APM status emulation using
+ battery class devices.
+
+config GENERIC_ADC_BATTERY
+ tristate "Generic battery support using IIO"
+ depends on IIO
+ help
+ Say Y here to enable support for the generic battery driver
+ which uses IIO framework to read adc.
+
+config MAX8925_POWER
+ tristate "MAX8925 battery charger support"
+ depends on MFD_MAX8925
+ help
+ Say Y here to enable support for the battery charger in the Maxim
+ MAX8925 PMIC.
+
+config WM831X_BACKUP
+ tristate "WM831X backup battery charger support"
+ depends on MFD_WM831X
+ help
+ Say Y here to enable support for the backup battery charger
+ in the Wolfson Microelectronics WM831x PMICs.
+
+config WM831X_POWER
+ tristate "WM831X PMU support"
+ depends on MFD_WM831X
+ help
+ Say Y here to enable support for the power management unit
+ provided by Wolfson Microelectronics WM831x PMICs.
+
+config WM8350_POWER
+ tristate "WM8350 PMU support"
+ depends on MFD_WM8350
+ help
+ Say Y here to enable support for the power management unit
+ provided by the Wolfson Microelectronics WM8350 PMIC.
+
+config TEST_POWER
+ tristate "Test power driver"
+ help
+ This driver is used for testing. It's safe to say M here.
+
+config BATTERY_88PM860X
+ tristate "Marvell 88PM860x battery driver"
+ depends on MFD_88PM860X
+ help
+ Say Y here to enable battery monitor for Marvell 88PM860x chip.
+
+config BATTERY_ACT8945A
+ tristate "Active-semi ACT8945A charger driver"
+ depends on MFD_ACT8945A || COMPILE_TEST
+ help
+ Say Y here to enable support for power supply provided by
+ Active-semi ActivePath ACT8945A charger.
+
+config BATTERY_DS2760
+ tristate "DS2760 battery driver (HP iPAQ & others)"
+ depends on W1 && W1_SLAVE_DS2760
+ help
+ Say Y here to enable support for batteries with ds2760 chip.
+
+config BATTERY_DS2780
+ tristate "DS2780 battery driver"
+ depends on HAS_IOMEM
+ select W1
+ select W1_SLAVE_DS2780
+ help
+ Say Y here to enable support for batteries with ds2780 chip.
+
+config BATTERY_DS2781
+ tristate "DS2781 battery driver"
+ depends on HAS_IOMEM
+ select W1
+ select W1_SLAVE_DS2781
+ help
+ If you enable this you will have the DS2781 battery driver support.
+
+ The battery monitor chip is used in many batteries/devices
+ as the one who is responsible for charging/discharging/monitoring
+ Li+ batteries.
+
+ If you are unsure, say N.
+
+config BATTERY_DS2782
+ tristate "DS2782/DS2786 standalone gas-gauge"
+ depends on I2C
+ help
+ Say Y here to enable support for the DS2782/DS2786 standalone battery
+ gas-gauge.
+
+config BATTERY_PMU
+ tristate "Apple PMU battery"
+ depends on PPC32 && ADB_PMU
+ help
+ Say Y here to expose battery information on Apple machines
+ through the generic battery class.
+
+config BATTERY_OLPC
+ tristate "One Laptop Per Child battery"
+ depends on X86_32 && OLPC
+ help
+ Say Y to enable support for the battery on the OLPC laptop.
+
+config BATTERY_TOSA
+ tristate "Sharp SL-6000 (tosa) battery"
+ depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
+ help
+ Say Y to enable support for the battery on the Sharp Zaurus
+ SL-6000 (tosa) models.
+
+config BATTERY_COLLIE
+ tristate "Sharp SL-5500 (collie) battery"
+ depends on SA1100_COLLIE && MCP_UCB1200
+ help
+ Say Y to enable support for the battery on the Sharp Zaurus
+ SL-5500 (collie) models.
+
+config BATTERY_IPAQ_MICRO
+ tristate "iPAQ Atmel Micro ASIC battery driver"
+ depends on MFD_IPAQ_MICRO
+ help
+ Choose this option if you want to monitor battery status on
+ Compaq/HP iPAQ h3100 and h3600.
+
+config BATTERY_WM97XX
+ bool "WM97xx generic battery driver"
+ depends on TOUCHSCREEN_WM97XX=y
+ help
+ Say Y to enable support for battery measured by WM97xx aux port.
+
+config BATTERY_SBS
+ tristate "SBS Compliant gas gauge"
+ depends on I2C
+ help
+ Say Y to include support for SBS battery driver for SBS-compliant
+ gas gauges.
+
+config BATTERY_BQ27XXX
+ tristate "BQ27xxx battery driver"
+ help
+ Say Y here to enable support for batteries with BQ27xxx chips.
+
+config BATTERY_BQ27XXX_I2C
+ tristate "BQ27xxx I2C support"
+ depends on BATTERY_BQ27XXX
+ depends on I2C
+ default y
+ help
+ Say Y here to enable support for batteries with BQ27xxx chips
+ connected over an I2C bus.
+
+config BATTERY_DA9030
+ tristate "DA9030 battery driver"
+ depends on PMIC_DA903X
+ help
+ Say Y here to enable support for batteries charger integrated into
+ DA9030 PMIC.
+
+config BATTERY_DA9052
+ tristate "Dialog DA9052 Battery"
+ depends on PMIC_DA9052
+ help
+ Say Y here to enable support for batteries charger integrated into
+ DA9052 PMIC.
+
+config CHARGER_DA9150
+ tristate "Dialog Semiconductor DA9150 Charger support"
+ depends on MFD_DA9150
+ depends on DA9150_GPADC
+ depends on IIO
+ help
+ Say Y here to enable support for charger unit of the DA9150
+ Integrated Charger & Fuel-Gauge IC.
+
+ This driver can also be built as a module. If so, the module will be
+ called da9150-charger.
+
+config BATTERY_DA9150
+ tristate "Dialog Semiconductor DA9150 Fuel Gauge support"
+ depends on MFD_DA9150
+ help
+ Say Y here to enable support for the Fuel-Gauge unit of the DA9150
+ Integrated Charger & Fuel-Gauge IC
+
+ This driver can also be built as a module. If so, the module will be
+ called da9150-fg.
+
+config AXP288_CHARGER
+ tristate "X-Powers AXP288 Charger"
+ depends on MFD_AXP20X && EXTCON_AXP288
+ help
+ Say yes here to have support X-Power AXP288 power management IC (PMIC)
+ integrated charger.
+
+config AXP288_FUEL_GAUGE
+ tristate "X-Powers AXP288 Fuel Gauge"
+ depends on MFD_AXP20X && IIO
+ help
+ Say yes here to have support for X-Power power management IC (PMIC)
+ Fuel Gauge. The device provides battery statistics and status
+ monitoring as well as alerts for battery over/under voltage and
+ over/under temperature.
+
+config BATTERY_MAX17040
+ tristate "Maxim MAX17040 Fuel Gauge"
+ depends on I2C
+ help
+ MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
+ in handheld and portable equipment. The MAX17040 is configured
+ to operate with a single lithium cell
+
+config BATTERY_MAX17042
+ tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
+ in handheld and portable equipment. The MAX17042 is configured
+ to operate with a single lithium cell. MAX8997 and MAX8966 are
+ multi-function devices that include fuel gauages that are compatible
+ with MAX17042. This driver also supports max17047/50 chips which are
+ improved version of max17042.
+
+config BATTERY_Z2
+ tristate "Z2 battery driver"
+ depends on I2C && MACH_ZIPIT2
+ help
+ Say Y to include support for the battery on the Zipit Z2.
+
+config BATTERY_S3C_ADC
+ tristate "Battery driver for Samsung ADC based monitoring"
+ depends on S3C_ADC
+ help
+ Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
+
+config BATTERY_TWL4030_MADC
+ tristate "TWL4030 MADC battery driver"
+ depends on TWL4030_MADC
+ help
+ Say Y here to enable this dumb driver for batteries managed
+ through the TWL4030 MADC.
+
+config CHARGER_88PM860X
+ tristate "Marvell 88PM860x Charger driver"
+ depends on MFD_88PM860X && BATTERY_88PM860X
+ help
+ Say Y here to enable charger for Marvell 88PM860x chip.
+
+config CHARGER_PCF50633
+ tristate "NXP PCF50633 MBC"
+ depends on MFD_PCF50633
+ help
+ Say Y to include support for NXP PCF50633 Main Battery Charger.
+
+config BATTERY_JZ4740
+ tristate "Ingenic JZ4740 battery"
+ depends on MACH_JZ4740
+ depends on MFD_JZ4740_ADC
+ help
+ Say Y to enable support for the battery on Ingenic JZ4740 based
+ boards.
+
+ This driver can be build as a module. If so, the module will be
+ called jz4740-battery.
+
+config BATTERY_INTEL_MID
+ tristate "Battery driver for Intel MID platforms"
+ depends on INTEL_SCU_IPC && SPI
+ help
+ Say Y here to enable the battery driver on Intel MID
+ platforms.
+
+config BATTERY_RX51
+ tristate "Nokia RX-51 (N900) battery driver"
+ depends on TWL4030_MADC
+ help
+ Say Y here to enable support for battery information on Nokia
+ RX-51, also known as N900 tablet.
+
+config CHARGER_ISP1704
+ tristate "ISP1704 USB Charger Detection"
+ depends on USB_PHY
+ depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
+ help
+ Say Y to enable support for USB Charger Detection with
+ ISP1707/ISP1704 USB transceivers.
+
+config CHARGER_MAX8903
+ tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
+ help
+ Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
+ The driver supports controlling charger-enable and current-limit
+ pins based on the status of charger connections with interrupt
+ handlers.
+
+config CHARGER_TWL4030
+ tristate "OMAP TWL4030 BCI charger driver"
+ depends on IIO && TWL4030_CORE
+ help
+ Say Y here to enable support for TWL4030 Battery Charge Interface.
+
+config CHARGER_LP8727
+ tristate "TI/National Semiconductor LP8727 charger driver"
+ depends on I2C
+ help
+ Say Y here to enable support for LP8727 Charger Driver.
+
+config CHARGER_LP8788
+ tristate "TI LP8788 charger driver"
+ depends on MFD_LP8788
+ depends on LP8788_ADC
+ depends on IIO
+ help
+ Say Y to enable support for the LP8788 linear charger.
+
+config CHARGER_GPIO
+ tristate "GPIO charger"
+ depends on GPIOLIB || COMPILE_TEST
+ help
+ Say Y to include support for chargers which report their online status
+ through a GPIO pin.
+
+ This driver can be build as a module. If so, the module will be
+ called gpio-charger.
+
+config CHARGER_MANAGER
+ bool "Battery charger manager for multiple chargers"
+ depends on REGULATOR
+ select EXTCON
+ help
+ Say Y to enable charger-manager support, which allows multiple
+ chargers attached to a battery and multiple batteries attached to a
+ system. The charger-manager also can monitor charging status in
+ runtime and in suspend-to-RAM by waking up the system periodically
+ with help of suspend_again support.
+
+config CHARGER_MAX14577
+ tristate "Maxim MAX14577/77836 battery charger driver"
+ depends on MFD_MAX14577
+ help
+ Say Y to enable support for the battery charger control sysfs and
+ platform data of MAX14577/77836 MUICs.
+
+config CHARGER_MAX77693
+ tristate "Maxim MAX77693 battery charger driver"
+ depends on MFD_MAX77693
+ help
+ Say Y to enable support for the Maxim MAX77693 battery charger.
+
+config CHARGER_MAX8997
+ tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
+ depends on MFD_MAX8997 && REGULATOR_MAX8997
+ help
+ Say Y to enable support for the battery charger control sysfs and
+ platform data of MAX8997/LP3974 PMICs.
+
+config CHARGER_MAX8998
+ tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
+ depends on MFD_MAX8998 && REGULATOR_MAX8998
+ help
+ Say Y to enable support for the battery charger control sysfs and
+ platform data of MAX8998/LP3974 PMICs.
+
+config CHARGER_QCOM_SMBB
+ tristate "Qualcomm Switch-Mode Battery Charger and Boost"
+ depends on MFD_SPMI_PMIC || COMPILE_TEST
+ depends on OF
+ depends on EXTCON
+ help
+ Say Y to include support for the Switch-Mode Battery Charger and
+ Boost (SMBB) hardware found in Qualcomm PM8941 PMICs. The charger
+ is an integrated, single-cell lithium-ion battery charger. DT
+ configuration is required for loading, see the devicetree
+ documentation for more detail. The base name for this driver is
+ 'pm8941_charger'.
+
+config CHARGER_BQ2415X
+ tristate "TI BQ2415x battery charger driver"
+ depends on I2C
+ help
+ Say Y to enable support for the TI BQ2415x battery charger
+ PMICs.
+
+ You'll need this driver to charge batteries on e.g. Nokia
+ RX-51/N900.
+
+config CHARGER_BQ24190
+ tristate "TI BQ24190 battery charger driver"
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
+ help
+ Say Y to enable support for the TI BQ24190 battery charger.
+
+config CHARGER_BQ24257
+ tristate "TI BQ24250/24251/24257 battery charger driver"
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
+ depends on REGMAP_I2C
+ help
+ Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery
+ chargers.
+
+config CHARGER_BQ24735
+ tristate "TI BQ24735 battery charger support"
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
+ help
+ Say Y to enable support for the TI BQ24735 battery charger.
+
+config CHARGER_BQ25890
+ tristate "TI BQ25890 battery charger driver"
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
+ select REGMAP_I2C
+ help
+ Say Y to enable support for the TI BQ25890 battery charger.
+
+config CHARGER_SMB347
+ tristate "Summit Microelectronics SMB347 Battery Charger"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Say Y to include support for Summit Microelectronics SMB347
+ Battery Charger.
+
+config CHARGER_TPS65090
+ tristate "TPS65090 battery charger driver"
+ depends on MFD_TPS65090
+ help
+ Say Y here to enable support for battery charging with TPS65090
+ PMIC chips.
+
+config CHARGER_TPS65217
+ tristate "TPS65217 battery charger driver"
+ depends on MFD_TPS65217
+ help
+ Say Y here to enable support for battery charging with TPS65217
+ PMIC chips.
+
+config BATTERY_GAUGE_LTC2941
+ tristate "LTC2941/LTC2943 Battery Gauge Driver"
+ depends on I2C
+ help
+ Say Y here to include support for LTC2941 and LTC2943 Battery
+ Gauge IC. The driver reports the charge count continuously, and
+ measures the voltage and temperature every 10 seconds.
+
+config AB8500_BM
+ bool "AB8500 Battery Management Driver"
+ depends on AB8500_CORE && AB8500_GPADC
+ help
+ Say Y to include support for AB8500 battery management.
+
+config BATTERY_GOLDFISH
+ tristate "Goldfish battery driver"
+ depends on GOLDFISH || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Say Y to enable support for the battery and AC power in the
+ Goldfish emulator.
+
+config BATTERY_RT5033
+ tristate "RT5033 fuel gauge support"
+ depends on MFD_RT5033
+ help
+ This adds support for battery fuel gauge in Richtek RT5033 PMIC.
+ The fuelgauge calculates and determines the battery state of charge
+ according to battery open circuit voltage.
+
+config CHARGER_RT9455
+ tristate "Richtek RT9455 battery charger driver"
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
+ select REGMAP_I2C
+ help
+ Say Y to enable support for Richtek RT9455 battery charger.
+
+config AXP20X_POWER
+ tristate "AXP20x power supply driver"
+ depends on MFD_AXP20X
+ help
+ This driver provides support for the power supply features of
+ AXP20x PMIC.
+
+endif # POWER_SUPPLY