summaryrefslogtreecommitdiffstats
path: root/drivers/platform/chrome/wilco_ec/debugfs.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/platform/chrome/wilco_ec/debugfs.c')
-rw-r--r--drivers/platform/chrome/wilco_ec/debugfs.c238
1 files changed, 238 insertions, 0 deletions
diff --git a/drivers/platform/chrome/wilco_ec/debugfs.c b/drivers/platform/chrome/wilco_ec/debugfs.c
new file mode 100644
index 000000000000..c090db2cd5be
--- /dev/null
+++ b/drivers/platform/chrome/wilco_ec/debugfs.c
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * debugfs attributes for Wilco EC
+ *
+ * Copyright 2019 Google LLC
+ *
+ * There is only one attribute used for debugging, called raw.
+ * You can write a hexadecimal sentence to raw, and that series of bytes
+ * will be sent to the EC. Then, you can read the bytes of response
+ * by reading from raw.
+ *
+ * For writing:
+ * Bytes 0-1 indicate the message type:
+ * 00 F0 = Execute Legacy Command
+ * 00 F2 = Read/Write NVRAM Property
+ * Byte 2 provides the command code
+ * Bytes 3+ consist of the data passed in the request
+ *
+ * When referencing the EC interface spec, byte 2 corresponds to MBOX[0],
+ * byte 3 corresponds to MBOX[1], etc.
+ *
+ * At least three bytes are required, for the msg type and command,
+ * with additional bytes optional for additional data.
+ *
+ * Example:
+ * // Request EC info type 3 (EC firmware build date)
+ * $ echo 00 f0 38 00 03 00 > raw
+ * // View the result. The decoded ASCII result "12/21/18" is
+ * // included after the raw hex.
+ * $ cat raw
+ * 00 31 32 2f 32 31 2f 31 38 00 38 00 01 00 2f 00 .12/21/18.8...
+ */
+
+#include <linux/ctype.h>
+#include <linux/debugfs.h>
+#include <linux/fs.h>
+#include <linux/module.h>
+#include <linux/platform_data/wilco-ec.h>
+#include <linux/platform_device.h>
+
+#define DRV_NAME "wilco-ec-debugfs"
+
+/* The 256 raw bytes will take up more space when represented as a hex string */
+#define FORMATTED_BUFFER_SIZE (EC_MAILBOX_DATA_SIZE_EXTENDED * 4)
+
+struct wilco_ec_debugfs {
+ struct wilco_ec_device *ec;
+ struct dentry *dir;
+ size_t response_size;
+ u8 raw_data[EC_MAILBOX_DATA_SIZE_EXTENDED];
+ u8 formatted_data[FORMATTED_BUFFER_SIZE];
+};
+static struct wilco_ec_debugfs *debug_info;
+
+/**
+ * parse_hex_sentence() - Convert a ascii hex representation into byte array.
+ * @in: Input buffer of ascii.
+ * @isize: Length of input buffer.
+ * @out: Output buffer.
+ * @osize: Length of output buffer, e.g. max number of bytes to parse.
+ *
+ * An valid input is a series of ascii hexadecimal numbers, separated by spaces.
+ * An example valid input is
+ * " 00 f2 0 000076 6 0 ff"
+ *
+ * If an individual "word" within the hex sentence is longer than MAX_WORD_SIZE,
+ * then the sentence is illegal, and parsing will fail.
+ *
+ * Return: Number of bytes parsed, or negative error code on failure.
+ */
+static int parse_hex_sentence(const char *in, int isize, u8 *out, int osize)
+{
+ int n_parsed = 0;
+ int word_start = 0;
+ int word_end;
+ int word_len;
+ /* Temp buffer for holding a "word" of chars that represents one byte */
+ #define MAX_WORD_SIZE 16
+ char tmp[MAX_WORD_SIZE + 1];
+ u8 byte;
+
+ while (word_start < isize && n_parsed < osize) {
+ /* Find the start of the next word */
+ while (word_start < isize && isspace(in[word_start]))
+ word_start++;
+ /* reached the end of the input before next word? */
+ if (word_start >= isize)
+ break;
+
+ /* Find the end of this word */
+ word_end = word_start;
+ while (word_end < isize && !isspace(in[word_end]))
+ word_end++;
+
+ /* Copy to a tmp NULL terminated string */
+ word_len = word_end - word_start;
+ if (word_len > MAX_WORD_SIZE)
+ return -EINVAL;
+ memcpy(tmp, in + word_start, word_len);
+ tmp[word_len] = '\0';
+
+ /*
+ * Convert from hex string, place in output. If fails to parse,
+ * just return -EINVAL because specific error code is only
+ * relevant for this one word, returning it would be confusing.
+ */
+ if (kstrtou8(tmp, 16, &byte))
+ return -EINVAL;
+ out[n_parsed++] = byte;
+
+ word_start = word_end;
+ }
+ return n_parsed;
+}
+
+/* The message type takes up two bytes*/
+#define TYPE_AND_DATA_SIZE ((EC_MAILBOX_DATA_SIZE) + 2)
+
+static ssize_t raw_write(struct file *file, const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ char *buf = debug_info->formatted_data;
+ struct wilco_ec_message msg;
+ u8 request_data[TYPE_AND_DATA_SIZE];
+ ssize_t kcount;
+ int ret;
+
+ if (count > FORMATTED_BUFFER_SIZE)
+ return -EINVAL;
+
+ kcount = simple_write_to_buffer(buf, FORMATTED_BUFFER_SIZE, ppos,
+ user_buf, count);
+ if (kcount < 0)
+ return kcount;
+
+ ret = parse_hex_sentence(buf, kcount, request_data, TYPE_AND_DATA_SIZE);
+ if (ret < 0)
+ return ret;
+ /* Need at least two bytes for message type and one for command */
+ if (ret < 3)
+ return -EINVAL;
+
+ /* Clear response data buffer */
+ memset(debug_info->raw_data, '\0', EC_MAILBOX_DATA_SIZE_EXTENDED);
+
+ msg.type = request_data[0] << 8 | request_data[1];
+ msg.flags = WILCO_EC_FLAG_RAW;
+ msg.command = request_data[2];
+ msg.request_data = ret > 3 ? request_data + 3 : 0;
+ msg.request_size = ret - 3;
+ msg.response_data = debug_info->raw_data;
+ msg.response_size = EC_MAILBOX_DATA_SIZE;
+
+ /* Telemetry commands use extended response data */
+ if (msg.type == WILCO_EC_MSG_TELEMETRY_LONG) {
+ msg.flags |= WILCO_EC_FLAG_EXTENDED_DATA;
+ msg.response_size = EC_MAILBOX_DATA_SIZE_EXTENDED;
+ }
+
+ ret = wilco_ec_mailbox(debug_info->ec, &msg);
+ if (ret < 0)
+ return ret;
+ debug_info->response_size = ret;
+
+ return count;
+}
+
+static ssize_t raw_read(struct file *file, char __user *user_buf, size_t count,
+ loff_t *ppos)
+{
+ int fmt_len = 0;
+
+ if (debug_info->response_size) {
+ fmt_len = hex_dump_to_buffer(debug_info->raw_data,
+ debug_info->response_size,
+ 16, 1, debug_info->formatted_data,
+ FORMATTED_BUFFER_SIZE, true);
+ /* Only return response the first time it is read */
+ debug_info->response_size = 0;
+ }
+
+ return simple_read_from_buffer(user_buf, count, ppos,
+ debug_info->formatted_data, fmt_len);
+}
+
+static const struct file_operations fops_raw = {
+ .owner = THIS_MODULE,
+ .read = raw_read,
+ .write = raw_write,
+ .llseek = no_llseek,
+};
+
+/**
+ * wilco_ec_debugfs_probe() - Create the debugfs node
+ * @pdev: The platform device, probably created in core.c
+ *
+ * Try to create a debugfs node. If it fails, then we don't want to change
+ * behavior at all, this is for debugging after all. Just fail silently.
+ *
+ * Return: 0 always.
+ */
+static int wilco_ec_debugfs_probe(struct platform_device *pdev)
+{
+ struct wilco_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
+
+ debug_info = devm_kzalloc(&pdev->dev, sizeof(*debug_info), GFP_KERNEL);
+ if (!debug_info)
+ return 0;
+ debug_info->ec = ec;
+ debug_info->dir = debugfs_create_dir("wilco_ec", NULL);
+ if (!debug_info->dir)
+ return 0;
+ debugfs_create_file("raw", 0644, debug_info->dir, NULL, &fops_raw);
+
+ return 0;
+}
+
+static int wilco_ec_debugfs_remove(struct platform_device *pdev)
+{
+ debugfs_remove_recursive(debug_info->dir);
+
+ return 0;
+}
+
+static struct platform_driver wilco_ec_debugfs_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ },
+ .probe = wilco_ec_debugfs_probe,
+ .remove = wilco_ec_debugfs_remove,
+};
+
+module_platform_driver(wilco_ec_debugfs_driver);
+
+MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_AUTHOR("Nick Crews <ncrews@chromium.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Wilco EC debugfs driver");