summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pinctrl')
-rw-r--r--drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c2
-rw-r--r--drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c4
-rw-r--r--drivers/pinctrl/nomadik/pinctrl-nomadik.c1
-rw-r--r--drivers/pinctrl/pinctrl-ingenic.c80
-rw-r--r--drivers/pinctrl/qcom/pinctrl-msm.c96
-rw-r--r--drivers/pinctrl/qcom/pinctrl-msm.h2
6 files changed, 107 insertions, 78 deletions
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
index 34803a6c7664..5c1a109842a7 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
@@ -347,7 +347,7 @@ FUNC_GROUP_DECL(RMII4, F24, E23, E24, E25, C25, C24, B26, B25, B24);
#define D22 40
SIG_EXPR_LIST_DECL_SESG(D22, SD1CLK, SD1, SIG_DESC_SET(SCU414, 8));
-SIG_EXPR_LIST_DECL_SEMG(D22, PWM8, PWM8G0, PWM8, SIG_DESC_SET(SCU414, 8));
+SIG_EXPR_LIST_DECL_SEMG(D22, PWM8, PWM8G0, PWM8, SIG_DESC_SET(SCU4B4, 8));
PIN_DECL_2(D22, GPIOF0, SD1CLK, PWM8);
GROUP_DECL(PWM8G0, D22);
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
index 7aeb552d16ce..72f17f26acd8 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
@@ -920,6 +920,10 @@ int mtk_pinconf_adv_pull_set(struct mtk_pinctrl *hw,
err = hw->soc->bias_set(hw, desc, pullup);
if (err)
return err;
+ } else if (hw->soc->bias_set_combo) {
+ err = hw->soc->bias_set_combo(hw, desc, pullup, arg);
+ if (err)
+ return err;
} else {
return -ENOTSUPP;
}
diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
index d4ea10803fd9..abfe11c7b49f 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
@@ -949,7 +949,6 @@ static void nmk_gpio_dbg_show_one(struct seq_file *s,
} else {
int irq = chip->to_irq(chip, offset);
const int pullidx = pull ? 1 : 0;
- bool wake;
int val;
static const char * const pulls[] = {
"none ",
diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
index 53a6a24bd052..3ea163498647 100644
--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -37,11 +37,11 @@
#define JZ4740_GPIO_TRIG 0x70
#define JZ4740_GPIO_FLAG 0x80
-#define JZ4760_GPIO_INT 0x10
-#define JZ4760_GPIO_PAT1 0x30
-#define JZ4760_GPIO_PAT0 0x40
-#define JZ4760_GPIO_FLAG 0x50
-#define JZ4760_GPIO_PEN 0x70
+#define JZ4770_GPIO_INT 0x10
+#define JZ4770_GPIO_PAT1 0x30
+#define JZ4770_GPIO_PAT0 0x40
+#define JZ4770_GPIO_FLAG 0x50
+#define JZ4770_GPIO_PEN 0x70
#define X1830_GPIO_PEL 0x110
#define X1830_GPIO_PEH 0x120
@@ -1688,8 +1688,8 @@ static inline bool ingenic_gpio_get_value(struct ingenic_gpio_chip *jzgc,
static void ingenic_gpio_set_value(struct ingenic_gpio_chip *jzgc,
u8 offset, int value)
{
- if (jzgc->jzpc->info->version >= ID_JZ4760)
- ingenic_gpio_set_bit(jzgc, JZ4760_GPIO_PAT0, offset, !!value);
+ if (jzgc->jzpc->info->version >= ID_JZ4770)
+ ingenic_gpio_set_bit(jzgc, JZ4770_GPIO_PAT0, offset, !!value);
else
ingenic_gpio_set_bit(jzgc, JZ4740_GPIO_DATA, offset, !!value);
}
@@ -1718,9 +1718,9 @@ static void irq_set_type(struct ingenic_gpio_chip *jzgc,
break;
}
- if (jzgc->jzpc->info->version >= ID_JZ4760) {
- reg1 = JZ4760_GPIO_PAT1;
- reg2 = JZ4760_GPIO_PAT0;
+ if (jzgc->jzpc->info->version >= ID_JZ4770) {
+ reg1 = JZ4770_GPIO_PAT1;
+ reg2 = JZ4770_GPIO_PAT0;
} else {
reg1 = JZ4740_GPIO_TRIG;
reg2 = JZ4740_GPIO_DIR;
@@ -1758,8 +1758,8 @@ static void ingenic_gpio_irq_enable(struct irq_data *irqd)
struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
int irq = irqd->hwirq;
- if (jzgc->jzpc->info->version >= ID_JZ4760)
- ingenic_gpio_set_bit(jzgc, JZ4760_GPIO_INT, irq, true);
+ if (jzgc->jzpc->info->version >= ID_JZ4770)
+ ingenic_gpio_set_bit(jzgc, JZ4770_GPIO_INT, irq, true);
else
ingenic_gpio_set_bit(jzgc, JZ4740_GPIO_SELECT, irq, true);
@@ -1774,8 +1774,8 @@ static void ingenic_gpio_irq_disable(struct irq_data *irqd)
ingenic_gpio_irq_mask(irqd);
- if (jzgc->jzpc->info->version >= ID_JZ4760)
- ingenic_gpio_set_bit(jzgc, JZ4760_GPIO_INT, irq, false);
+ if (jzgc->jzpc->info->version >= ID_JZ4770)
+ ingenic_gpio_set_bit(jzgc, JZ4770_GPIO_INT, irq, false);
else
ingenic_gpio_set_bit(jzgc, JZ4740_GPIO_SELECT, irq, false);
}
@@ -1799,8 +1799,8 @@ static void ingenic_gpio_irq_ack(struct irq_data *irqd)
irq_set_type(jzgc, irq, IRQ_TYPE_LEVEL_HIGH);
}
- if (jzgc->jzpc->info->version >= ID_JZ4760)
- ingenic_gpio_set_bit(jzgc, JZ4760_GPIO_FLAG, irq, false);
+ if (jzgc->jzpc->info->version >= ID_JZ4770)
+ ingenic_gpio_set_bit(jzgc, JZ4770_GPIO_FLAG, irq, false);
else
ingenic_gpio_set_bit(jzgc, JZ4740_GPIO_DATA, irq, true);
}
@@ -1856,8 +1856,8 @@ static void ingenic_gpio_irq_handler(struct irq_desc *desc)
chained_irq_enter(irq_chip, desc);
- if (jzgc->jzpc->info->version >= ID_JZ4760)
- flag = ingenic_gpio_read_reg(jzgc, JZ4760_GPIO_FLAG);
+ if (jzgc->jzpc->info->version >= ID_JZ4770)
+ flag = ingenic_gpio_read_reg(jzgc, JZ4770_GPIO_FLAG);
else
flag = ingenic_gpio_read_reg(jzgc, JZ4740_GPIO_FLAG);
@@ -1938,9 +1938,9 @@ static int ingenic_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
struct ingenic_pinctrl *jzpc = jzgc->jzpc;
unsigned int pin = gc->base + offset;
- if (jzpc->info->version >= ID_JZ4760) {
- if (ingenic_get_pin_config(jzpc, pin, JZ4760_GPIO_INT) ||
- ingenic_get_pin_config(jzpc, pin, JZ4760_GPIO_PAT1))
+ if (jzpc->info->version >= ID_JZ4770) {
+ if (ingenic_get_pin_config(jzpc, pin, JZ4770_GPIO_INT) ||
+ ingenic_get_pin_config(jzpc, pin, JZ4770_GPIO_PAT1))
return GPIO_LINE_DIRECTION_IN;
return GPIO_LINE_DIRECTION_OUT;
}
@@ -1991,20 +1991,20 @@ static int ingenic_pinmux_set_pin_fn(struct ingenic_pinctrl *jzpc,
'A' + offt, idx, func);
if (jzpc->info->version >= ID_X1000) {
- ingenic_shadow_config_pin(jzpc, pin, JZ4760_GPIO_INT, false);
+ ingenic_shadow_config_pin(jzpc, pin, JZ4770_GPIO_INT, false);
ingenic_shadow_config_pin(jzpc, pin, GPIO_MSK, false);
- ingenic_shadow_config_pin(jzpc, pin, JZ4760_GPIO_PAT1, func & 0x2);
- ingenic_shadow_config_pin(jzpc, pin, JZ4760_GPIO_PAT0, func & 0x1);
+ ingenic_shadow_config_pin(jzpc, pin, JZ4770_GPIO_PAT1, func & 0x2);
+ ingenic_shadow_config_pin(jzpc, pin, JZ4770_GPIO_PAT0, func & 0x1);
ingenic_shadow_config_pin_load(jzpc, pin);
- } else if (jzpc->info->version >= ID_JZ4760) {
- ingenic_config_pin(jzpc, pin, JZ4760_GPIO_INT, false);
+ } else if (jzpc->info->version >= ID_JZ4770) {
+ ingenic_config_pin(jzpc, pin, JZ4770_GPIO_INT, false);
ingenic_config_pin(jzpc, pin, GPIO_MSK, false);
- ingenic_config_pin(jzpc, pin, JZ4760_GPIO_PAT1, func & 0x2);
- ingenic_config_pin(jzpc, pin, JZ4760_GPIO_PAT0, func & 0x1);
+ ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT1, func & 0x2);
+ ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT0, func & 0x1);
} else {
ingenic_config_pin(jzpc, pin, JZ4740_GPIO_FUNC, true);
ingenic_config_pin(jzpc, pin, JZ4740_GPIO_TRIG, func & 0x2);
- ingenic_config_pin(jzpc, pin, JZ4740_GPIO_SELECT, func > 0);
+ ingenic_config_pin(jzpc, pin, JZ4740_GPIO_SELECT, func & 0x1);
}
return 0;
@@ -2057,14 +2057,14 @@ static int ingenic_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
'A' + offt, idx, input ? "in" : "out");
if (jzpc->info->version >= ID_X1000) {
- ingenic_shadow_config_pin(jzpc, pin, JZ4760_GPIO_INT, false);
+ ingenic_shadow_config_pin(jzpc, pin, JZ4770_GPIO_INT, false);
ingenic_shadow_config_pin(jzpc, pin, GPIO_MSK, true);
- ingenic_shadow_config_pin(jzpc, pin, JZ4760_GPIO_PAT1, input);
+ ingenic_shadow_config_pin(jzpc, pin, JZ4770_GPIO_PAT1, input);
ingenic_shadow_config_pin_load(jzpc, pin);
- } else if (jzpc->info->version >= ID_JZ4760) {
- ingenic_config_pin(jzpc, pin, JZ4760_GPIO_INT, false);
+ } else if (jzpc->info->version >= ID_JZ4770) {
+ ingenic_config_pin(jzpc, pin, JZ4770_GPIO_INT, false);
ingenic_config_pin(jzpc, pin, GPIO_MSK, true);
- ingenic_config_pin(jzpc, pin, JZ4760_GPIO_PAT1, input);
+ ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT1, input);
} else {
ingenic_config_pin(jzpc, pin, JZ4740_GPIO_SELECT, false);
ingenic_config_pin(jzpc, pin, JZ4740_GPIO_DIR, !input);
@@ -2091,8 +2091,8 @@ static int ingenic_pinconf_get(struct pinctrl_dev *pctldev,
unsigned int offt = pin / PINS_PER_GPIO_CHIP;
bool pull;
- if (jzpc->info->version >= ID_JZ4760)
- pull = !ingenic_get_pin_config(jzpc, pin, JZ4760_GPIO_PEN);
+ if (jzpc->info->version >= ID_JZ4770)
+ pull = !ingenic_get_pin_config(jzpc, pin, JZ4770_GPIO_PEN);
else
pull = !ingenic_get_pin_config(jzpc, pin, JZ4740_GPIO_PULL_DIS);
@@ -2141,8 +2141,8 @@ static void ingenic_set_bias(struct ingenic_pinctrl *jzpc,
REG_SET(X1830_GPIO_PEH), bias << idxh);
}
- } else if (jzpc->info->version >= ID_JZ4760) {
- ingenic_config_pin(jzpc, pin, JZ4760_GPIO_PEN, !bias);
+ } else if (jzpc->info->version >= ID_JZ4770) {
+ ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PEN, !bias);
} else {
ingenic_config_pin(jzpc, pin, JZ4740_GPIO_PULL_DIS, !bias);
}
@@ -2151,8 +2151,8 @@ static void ingenic_set_bias(struct ingenic_pinctrl *jzpc,
static void ingenic_set_output_level(struct ingenic_pinctrl *jzpc,
unsigned int pin, bool high)
{
- if (jzpc->info->version >= ID_JZ4760)
- ingenic_config_pin(jzpc, pin, JZ4760_GPIO_PAT0, high);
+ if (jzpc->info->version >= ID_JZ4770)
+ ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT0, high);
else
ingenic_config_pin(jzpc, pin, JZ4740_GPIO_DATA, high);
}
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index e051aecf95c4..d70caecd21d2 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -51,6 +51,7 @@
* @dual_edge_irqs: Bitmap of irqs that need sw emulated dual edge
* detection.
* @skip_wake_irqs: Skip IRQs that are handled by wakeup interrupt controller
+ * @disabled_for_mux: These IRQs were disabled because we muxed away.
* @soc: Reference to soc_data of platform specific data.
* @regs: Base addresses for the TLMM tiles.
* @phys_base: Physical base address
@@ -72,6 +73,7 @@ struct msm_pinctrl {
DECLARE_BITMAP(dual_edge_irqs, MAX_NR_GPIO);
DECLARE_BITMAP(enabled_irqs, MAX_NR_GPIO);
DECLARE_BITMAP(skip_wake_irqs, MAX_NR_GPIO);
+ DECLARE_BITMAP(disabled_for_mux, MAX_NR_GPIO);
const struct msm_pinctrl_soc_data *soc;
void __iomem *regs[MAX_NR_TILES];
@@ -96,6 +98,14 @@ MSM_ACCESSOR(intr_cfg)
MSM_ACCESSOR(intr_status)
MSM_ACCESSOR(intr_target)
+static void msm_ack_intr_status(struct msm_pinctrl *pctrl,
+ const struct msm_pingroup *g)
+{
+ u32 val = g->intr_ack_high ? BIT(g->intr_status_bit) : 0;
+
+ msm_writel_intr_status(val, pctrl, g);
+}
+
static int msm_get_groups_count(struct pinctrl_dev *pctldev)
{
struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
@@ -171,6 +181,10 @@ static int msm_pinmux_set_mux(struct pinctrl_dev *pctldev,
unsigned group)
{
struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+ struct gpio_chip *gc = &pctrl->chip;
+ unsigned int irq = irq_find_mapping(gc->irq.domain, group);
+ struct irq_data *d = irq_get_irq_data(irq);
+ unsigned int gpio_func = pctrl->soc->gpio_func;
const struct msm_pingroup *g;
unsigned long flags;
u32 val, mask;
@@ -187,6 +201,20 @@ static int msm_pinmux_set_mux(struct pinctrl_dev *pctldev,
if (WARN_ON(i == g->nfuncs))
return -EINVAL;
+ /*
+ * If an GPIO interrupt is setup on this pin then we need special
+ * handling. Specifically interrupt detection logic will still see
+ * the pin twiddle even when we're muxed away.
+ *
+ * When we see a pin with an interrupt setup on it then we'll disable
+ * (mask) interrupts on it when we mux away until we mux back. Note
+ * that disable_irq() refcounts and interrupts are disabled as long as
+ * at least one disable_irq() has been called.
+ */
+ if (d && i != gpio_func &&
+ !test_and_set_bit(d->hwirq, pctrl->disabled_for_mux))
+ disable_irq(irq);
+
raw_spin_lock_irqsave(&pctrl->lock, flags);
val = msm_readl_ctl(pctrl, g);
@@ -196,6 +224,20 @@ static int msm_pinmux_set_mux(struct pinctrl_dev *pctldev,
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
+ if (d && i == gpio_func &&
+ test_and_clear_bit(d->hwirq, pctrl->disabled_for_mux)) {
+ /*
+ * Clear interrupts detected while not GPIO since we only
+ * masked things.
+ */
+ if (d->parent_data && test_bit(d->hwirq, pctrl->skip_wake_irqs))
+ irq_chip_set_parent_state(d, IRQCHIP_STATE_PENDING, false);
+ else
+ msm_ack_intr_status(pctrl, g);
+
+ enable_irq(irq);
+ }
+
return 0;
}
@@ -210,8 +252,7 @@ static int msm_pinmux_request_gpio(struct pinctrl_dev *pctldev,
if (!g->nfuncs)
return 0;
- /* For now assume function 0 is GPIO because it always is */
- return msm_pinmux_set_mux(pctldev, g->funcs[0], offset);
+ return msm_pinmux_set_mux(pctldev, g->funcs[pctrl->soc->gpio_func], offset);
}
static const struct pinmux_ops msm_pinmux_ops = {
@@ -774,7 +815,7 @@ static void msm_gpio_irq_mask(struct irq_data *d)
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
}
-static void msm_gpio_irq_clear_unmask(struct irq_data *d, bool status_clear)
+static void msm_gpio_irq_unmask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
@@ -792,17 +833,6 @@ static void msm_gpio_irq_clear_unmask(struct irq_data *d, bool status_clear)
raw_spin_lock_irqsave(&pctrl->lock, flags);
- if (status_clear) {
- /*
- * clear the interrupt status bit before unmask to avoid
- * any erroneous interrupts that would have got latched
- * when the interrupt is not in use.
- */
- val = msm_readl_intr_status(pctrl, g);
- val &= ~BIT(g->intr_status_bit);
- msm_writel_intr_status(val, pctrl, g);
- }
-
val = msm_readl_intr_cfg(pctrl, g);
val |= BIT(g->intr_raw_status_bit);
val |= BIT(g->intr_enable_bit);
@@ -822,7 +852,7 @@ static void msm_gpio_irq_enable(struct irq_data *d)
irq_chip_enable_parent(d);
if (!test_bit(d->hwirq, pctrl->skip_wake_irqs))
- msm_gpio_irq_clear_unmask(d, true);
+ msm_gpio_irq_unmask(d);
}
static void msm_gpio_irq_disable(struct irq_data *d)
@@ -837,11 +867,6 @@ static void msm_gpio_irq_disable(struct irq_data *d)
msm_gpio_irq_mask(d);
}
-static void msm_gpio_irq_unmask(struct irq_data *d)
-{
- msm_gpio_irq_clear_unmask(d, false);
-}
-
/**
* msm_gpio_update_dual_edge_parent() - Prime next edge for IRQs handled by parent.
* @d: The irq dta.
@@ -894,7 +919,6 @@ static void msm_gpio_irq_ack(struct irq_data *d)
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
const struct msm_pingroup *g;
unsigned long flags;
- u32 val;
if (test_bit(d->hwirq, pctrl->skip_wake_irqs)) {
if (test_bit(d->hwirq, pctrl->dual_edge_irqs))
@@ -906,12 +930,7 @@ static void msm_gpio_irq_ack(struct irq_data *d)
raw_spin_lock_irqsave(&pctrl->lock, flags);
- val = msm_readl_intr_status(pctrl, g);
- if (g->intr_ack_high)
- val |= BIT(g->intr_status_bit);
- else
- val &= ~BIT(g->intr_status_bit);
- msm_writel_intr_status(val, pctrl, g);
+ msm_ack_intr_status(pctrl, g);
if (test_bit(d->hwirq, pctrl->dual_edge_irqs))
msm_gpio_update_dual_edge_pos(pctrl, g, d);
@@ -936,6 +955,7 @@ static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int type)
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
const struct msm_pingroup *g;
unsigned long flags;
+ bool was_enabled;
u32 val;
if (msm_gpio_needs_dual_edge_parent_workaround(d, type)) {
@@ -997,6 +1017,7 @@ static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int type)
* could cause the INTR_STATUS to be set for EDGE interrupts.
*/
val = msm_readl_intr_cfg(pctrl, g);
+ was_enabled = val & BIT(g->intr_raw_status_bit);
val |= BIT(g->intr_raw_status_bit);
if (g->intr_detection_width == 2) {
val &= ~(3 << g->intr_detection_bit);
@@ -1046,6 +1067,14 @@ static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int type)
}
msm_writel_intr_cfg(val, pctrl, g);
+ /*
+ * The first time we set RAW_STATUS_EN it could trigger an interrupt.
+ * Clear the interrupt. This is safe because we have
+ * IRQCHIP_SET_TYPE_MASKED.
+ */
+ if (!was_enabled)
+ msm_ack_intr_status(pctrl, g);
+
if (test_bit(d->hwirq, pctrl->dual_edge_irqs))
msm_gpio_update_dual_edge_pos(pctrl, g, d);
@@ -1099,16 +1128,11 @@ static int msm_gpio_irq_reqres(struct irq_data *d)
}
/*
- * Clear the interrupt that may be pending before we enable
- * the line.
- * This is especially a problem with the GPIOs routed to the
- * PDC. These GPIOs are direct-connect interrupts to the GIC.
- * Disabling the interrupt line at the PDC does not prevent
- * the interrupt from being latched at the GIC. The state at
- * GIC needs to be cleared before enabling.
+ * The disable / clear-enable workaround we do in msm_pinmux_set_mux()
+ * only works if disable is not lazy since we only clear any bogus
+ * interrupt in hardware. Explicitly mark the interrupt as UNLAZY.
*/
- if (d->parent_data && test_bit(d->hwirq, pctrl->skip_wake_irqs))
- irq_chip_set_parent_state(d, IRQCHIP_STATE_PENDING, 0);
+ irq_set_status_flags(d->irq, IRQ_DISABLE_UNLAZY);
return 0;
out:
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.h b/drivers/pinctrl/qcom/pinctrl-msm.h
index 333f99243c43..e31a5167c91e 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.h
+++ b/drivers/pinctrl/qcom/pinctrl-msm.h
@@ -118,6 +118,7 @@ struct msm_gpio_wakeirq_map {
* @wakeirq_dual_edge_errata: If true then GPIOs using the wakeirq_map need
* to be aware that their parent can't handle dual
* edge interrupts.
+ * @gpio_func: Which function number is GPIO (usually 0).
*/
struct msm_pinctrl_soc_data {
const struct pinctrl_pin_desc *pins;
@@ -134,6 +135,7 @@ struct msm_pinctrl_soc_data {
const struct msm_gpio_wakeirq_map *wakeirq_map;
unsigned int nwakeirq_map;
bool wakeirq_dual_edge_errata;
+ unsigned int gpio_func;
};
extern const struct dev_pm_ops msm_pinctrl_dev_pm_ops;
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-20 05:43:01 +0000