diff options
Diffstat (limited to 'drivers/phy/samsung/phy-s5pv210-usb2.c')
| -rw-r--r-- | drivers/phy/samsung/phy-s5pv210-usb2.c | 187 |
1 files changed, 187 insertions, 0 deletions
diff --git a/drivers/phy/samsung/phy-s5pv210-usb2.c b/drivers/phy/samsung/phy-s5pv210-usb2.c new file mode 100644 index 000000000000..f6f72339bbc3 --- /dev/null +++ b/drivers/phy/samsung/phy-s5pv210-usb2.c @@ -0,0 +1,187 @@ +/* + * Samsung SoC USB 1.1/2.0 PHY driver - S5PV210 support + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Authors: Kamil Debski <k.debski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/phy/phy.h> +#include "phy-samsung-usb2.h" + +/* Exynos USB PHY registers */ + +/* PHY power control */ +#define S5PV210_UPHYPWR 0x0 + +#define S5PV210_UPHYPWR_PHY0_SUSPEND BIT(0) +#define S5PV210_UPHYPWR_PHY0_PWR BIT(3) +#define S5PV210_UPHYPWR_PHY0_OTG_PWR BIT(4) +#define S5PV210_UPHYPWR_PHY0 ( \ + S5PV210_UPHYPWR_PHY0_SUSPEND | \ + S5PV210_UPHYPWR_PHY0_PWR | \ + S5PV210_UPHYPWR_PHY0_OTG_PWR) + +#define S5PV210_UPHYPWR_PHY1_SUSPEND BIT(6) +#define S5PV210_UPHYPWR_PHY1_PWR BIT(7) +#define S5PV210_UPHYPWR_PHY1 ( \ + S5PV210_UPHYPWR_PHY1_SUSPEND | \ + S5PV210_UPHYPWR_PHY1_PWR) + +/* PHY clock control */ +#define S5PV210_UPHYCLK 0x4 + +#define S5PV210_UPHYCLK_PHYFSEL_MASK (0x3 << 0) +#define S5PV210_UPHYCLK_PHYFSEL_48MHZ (0x0 << 0) +#define S5PV210_UPHYCLK_PHYFSEL_24MHZ (0x3 << 0) +#define S5PV210_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0) + +#define S5PV210_UPHYCLK_PHY0_ID_PULLUP BIT(2) +#define S5PV210_UPHYCLK_PHY0_COMMON_ON BIT(4) +#define S5PV210_UPHYCLK_PHY1_COMMON_ON BIT(7) + +/* PHY reset control */ +#define S5PV210_UPHYRST 0x8 + +#define S5PV210_URSTCON_PHY0 BIT(0) +#define S5PV210_URSTCON_OTG_HLINK BIT(1) +#define S5PV210_URSTCON_OTG_PHYLINK BIT(2) +#define S5PV210_URSTCON_PHY1_ALL BIT(3) +#define S5PV210_URSTCON_HOST_LINK_ALL BIT(4) + +/* Isolation, configured in the power management unit */ +#define S5PV210_USB_ISOL_OFFSET 0x680c +#define S5PV210_USB_ISOL_DEVICE BIT(0) +#define S5PV210_USB_ISOL_HOST BIT(1) + + +enum s5pv210_phy_id { + S5PV210_DEVICE, + S5PV210_HOST, + S5PV210_NUM_PHYS, +}; + +/* + * s5pv210_rate_to_clk() converts the supplied clock rate to the value that + * can be written to the phy register. + */ +static int s5pv210_rate_to_clk(unsigned long rate, u32 *reg) +{ + switch (rate) { + case 12 * MHZ: + *reg = S5PV210_UPHYCLK_PHYFSEL_12MHZ; + break; + case 24 * MHZ: + *reg = S5PV210_UPHYCLK_PHYFSEL_24MHZ; + break; + case 48 * MHZ: + *reg = S5PV210_UPHYCLK_PHYFSEL_48MHZ; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void s5pv210_isol(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 mask; + + switch (inst->cfg->id) { + case S5PV210_DEVICE: + mask = S5PV210_USB_ISOL_DEVICE; + break; + case S5PV210_HOST: + mask = S5PV210_USB_ISOL_HOST; + break; + default: + return; + } + + regmap_update_bits(drv->reg_pmu, S5PV210_USB_ISOL_OFFSET, + mask, on ? 0 : mask); +} + +static void s5pv210_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 rstbits = 0; + u32 phypwr = 0; + u32 rst; + u32 pwr; + + switch (inst->cfg->id) { + case S5PV210_DEVICE: + phypwr = S5PV210_UPHYPWR_PHY0; + rstbits = S5PV210_URSTCON_PHY0; + break; + case S5PV210_HOST: + phypwr = S5PV210_UPHYPWR_PHY1; + rstbits = S5PV210_URSTCON_PHY1_ALL | + S5PV210_URSTCON_HOST_LINK_ALL; + break; + } + + if (on) { + writel(drv->ref_reg_val, drv->reg_phy + S5PV210_UPHYCLK); + + pwr = readl(drv->reg_phy + S5PV210_UPHYPWR); + pwr &= ~phypwr; + writel(pwr, drv->reg_phy + S5PV210_UPHYPWR); + + rst = readl(drv->reg_phy + S5PV210_UPHYRST); + rst |= rstbits; + writel(rst, drv->reg_phy + S5PV210_UPHYRST); + udelay(10); + rst &= ~rstbits; + writel(rst, drv->reg_phy + S5PV210_UPHYRST); + } else { + pwr = readl(drv->reg_phy + S5PV210_UPHYPWR); + pwr |= phypwr; + writel(pwr, drv->reg_phy + S5PV210_UPHYPWR); + } +} + +static int s5pv210_power_on(struct samsung_usb2_phy_instance *inst) +{ + s5pv210_isol(inst, 0); + s5pv210_phy_pwr(inst, 1); + + return 0; +} + +static int s5pv210_power_off(struct samsung_usb2_phy_instance *inst) +{ + s5pv210_phy_pwr(inst, 0); + s5pv210_isol(inst, 1); + + return 0; +} + +static const struct samsung_usb2_common_phy s5pv210_phys[S5PV210_NUM_PHYS] = { + [S5PV210_DEVICE] = { + .label = "device", + .id = S5PV210_DEVICE, + .power_on = s5pv210_power_on, + .power_off = s5pv210_power_off, + }, + [S5PV210_HOST] = { + .label = "host", + .id = S5PV210_HOST, + .power_on = s5pv210_power_on, + .power_off = s5pv210_power_off, + }, +}; + +const struct samsung_usb2_phy_config s5pv210_usb2_phy_config = { + .num_phys = ARRAY_SIZE(s5pv210_phys), + .phys = s5pv210_phys, + .rate_to_clk = s5pv210_rate_to_clk, +}; |