diff options
Diffstat (limited to 'drivers/phy/phy-mt65xx-usb3.c')
| -rw-r--r-- | drivers/phy/phy-mt65xx-usb3.c | 99 |
1 files changed, 96 insertions, 3 deletions
diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c index 2afbf9f36d83..c0e7b4b0cf5c 100644 --- a/drivers/phy/phy-mt65xx-usb3.c +++ b/drivers/phy/phy-mt65xx-usb3.c @@ -17,6 +17,7 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/module.h> #include <linux/of_address.h> #include <linux/phy/phy.h> @@ -27,6 +28,7 @@ * relative to USB3_SIF2_BASE base address */ #define SSUSB_SIFSLV_SPLLC 0x0000 +#define SSUSB_SIFSLV_U2FREQ 0x0100 /* offsets of sub-segment in each port registers */ #define SSUSB_SIFSLV_U2PHY_COM_BASE 0x0000 @@ -41,6 +43,7 @@ #define PA2_RG_SIF_U2PLL_FORCE_EN BIT(18) #define U3P_USBPHYACR5 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0014) +#define PA5_RG_U2_HSTX_SRCAL_EN BIT(15) #define PA5_RG_U2_HSTX_SRCTRL GENMASK(14, 12) #define PA5_RG_U2_HSTX_SRCTRL_VAL(x) ((0x7 & (x)) << 12) #define PA5_RG_U2_HS_100U_U3_EN BIT(11) @@ -113,6 +116,24 @@ #define XC3_RG_U3_XTAL_RX_PWD BIT(9) #define XC3_RG_U3_FRC_XTAL_RX_PWD BIT(8) +#define U3P_U2FREQ_FMCR0 (SSUSB_SIFSLV_U2FREQ + 0x00) +#define P2F_RG_MONCLK_SEL GENMASK(27, 26) +#define P2F_RG_MONCLK_SEL_VAL(x) ((0x3 & (x)) << 26) +#define P2F_RG_FREQDET_EN BIT(24) +#define P2F_RG_CYCLECNT GENMASK(23, 0) +#define P2F_RG_CYCLECNT_VAL(x) ((P2F_RG_CYCLECNT) & (x)) + +#define U3P_U2FREQ_VALUE (SSUSB_SIFSLV_U2FREQ + 0x0c) + +#define U3P_U2FREQ_FMMONR1 (SSUSB_SIFSLV_U2FREQ + 0x10) +#define P2F_USB_FM_VALID BIT(0) +#define P2F_RG_FRCK_EN BIT(8) + +#define U3P_REF_CLK 26 /* MHZ */ +#define U3P_SLEW_RATE_COEF 28 +#define U3P_SR_COEF_DIVISOR 1000 +#define U3P_FM_DET_CYCLE_CNT 1024 + struct mt65xx_phy_instance { struct phy *phy; void __iomem *port_base; @@ -128,6 +149,77 @@ struct mt65xx_u3phy { int nphys; }; +static void hs_slew_rate_calibrate(struct mt65xx_u3phy *u3phy, + struct mt65xx_phy_instance *instance) +{ + void __iomem *sif_base = u3phy->sif_base; + int calibration_val; + int fm_out; + u32 tmp; + + /* enable USB ring oscillator */ + tmp = readl(instance->port_base + U3P_USBPHYACR5); + tmp |= PA5_RG_U2_HSTX_SRCAL_EN; + writel(tmp, instance->port_base + U3P_USBPHYACR5); + udelay(1); + + /*enable free run clock */ + tmp = readl(sif_base + U3P_U2FREQ_FMMONR1); + tmp |= P2F_RG_FRCK_EN; + writel(tmp, sif_base + U3P_U2FREQ_FMMONR1); + + /* set cycle count as 1024, and select u2 channel */ + tmp = readl(sif_base + U3P_U2FREQ_FMCR0); + tmp &= ~(P2F_RG_CYCLECNT | P2F_RG_MONCLK_SEL); + tmp |= P2F_RG_CYCLECNT_VAL(U3P_FM_DET_CYCLE_CNT); + tmp |= P2F_RG_MONCLK_SEL_VAL(instance->index); + writel(tmp, sif_base + U3P_U2FREQ_FMCR0); + + /* enable frequency meter */ + tmp = readl(sif_base + U3P_U2FREQ_FMCR0); + tmp |= P2F_RG_FREQDET_EN; + writel(tmp, sif_base + U3P_U2FREQ_FMCR0); + + /* ignore return value */ + readl_poll_timeout(sif_base + U3P_U2FREQ_FMMONR1, tmp, + (tmp & P2F_USB_FM_VALID), 10, 200); + + fm_out = readl(sif_base + U3P_U2FREQ_VALUE); + + /* disable frequency meter */ + tmp = readl(sif_base + U3P_U2FREQ_FMCR0); + tmp &= ~P2F_RG_FREQDET_EN; + writel(tmp, sif_base + U3P_U2FREQ_FMCR0); + + /*disable free run clock */ + tmp = readl(sif_base + U3P_U2FREQ_FMMONR1); + tmp &= ~P2F_RG_FRCK_EN; + writel(tmp, sif_base + U3P_U2FREQ_FMMONR1); + + if (fm_out) { + /* ( 1024 / FM_OUT ) x reference clock frequency x 0.028 */ + tmp = U3P_FM_DET_CYCLE_CNT * U3P_REF_CLK * U3P_SLEW_RATE_COEF; + tmp /= fm_out; + calibration_val = DIV_ROUND_CLOSEST(tmp, U3P_SR_COEF_DIVISOR); + } else { + /* if FM detection fail, set default value */ + calibration_val = 4; + } + dev_dbg(u3phy->dev, "phy:%d, fm_out:%d, calib:%d\n", + instance->index, fm_out, calibration_val); + + /* set HS slew rate */ + tmp = readl(instance->port_base + U3P_USBPHYACR5); + tmp &= ~PA5_RG_U2_HSTX_SRCTRL; + tmp |= PA5_RG_U2_HSTX_SRCTRL_VAL(calibration_val); + writel(tmp, instance->port_base + U3P_USBPHYACR5); + + /* disable USB ring oscillator */ + tmp = readl(instance->port_base + U3P_USBPHYACR5); + tmp &= ~PA5_RG_U2_HSTX_SRCAL_EN; + writel(tmp, instance->port_base + U3P_USBPHYACR5); +} + static void phy_instance_init(struct mt65xx_u3phy *u3phy, struct mt65xx_phy_instance *instance) { @@ -226,9 +318,9 @@ static void phy_instance_power_on(struct mt65xx_u3phy *u3phy, tmp |= XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD; writel(tmp, u3phy->sif_base + U3P_XTALCTL3); - /* [mt8173]disable Change 100uA current from SSUSB */ + /* [mt8173]switch 100uA current to SSUSB */ tmp = readl(port_base + U3P_USBPHYACR5); - tmp &= ~PA5_RG_U2_HS_100U_U3_EN; + tmp |= PA5_RG_U2_HS_100U_U3_EN; writel(tmp, port_base + U3P_USBPHYACR5); } @@ -273,7 +365,7 @@ static void phy_instance_power_off(struct mt65xx_u3phy *u3phy, writel(tmp, port_base + U3P_USBPHYACR6); if (!index) { - /* (also disable)Change 100uA current switch to USB2.0 */ + /* switch 100uA current back to USB2.0 */ tmp = readl(port_base + U3P_USBPHYACR5); tmp &= ~PA5_RG_U2_HS_100U_U3_EN; writel(tmp, port_base + U3P_USBPHYACR5); @@ -343,6 +435,7 @@ static int mt65xx_phy_power_on(struct phy *phy) struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent); phy_instance_power_on(u3phy, instance); + hs_slew_rate_calibrate(u3phy, instance); return 0; } |