diff options
Diffstat (limited to 'drivers/pcmcia/yenta_socket.c')
-rw-r--r-- | drivers/pcmcia/yenta_socket.c | 140 |
1 files changed, 44 insertions, 96 deletions
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c index ec6ab65f0872..4145eb83b9b6 100644 --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -49,7 +49,13 @@ MODULE_PARM_DESC(pwr_irqs_off, "Force IRQs off during power-on of slot. Use only #define to_cycles(ns) ((ns)/120) #define to_ns(cycles) ((cycles)*120) +/** + * yenta PCI irq probing. + * currently only used in the TI/EnE initialization code + */ +#ifdef CONFIG_YENTA_TI static int yenta_probe_cb_irq(struct yenta_socket *socket); +#endif static unsigned int override_bios; @@ -224,95 +230,6 @@ static int yenta_get_status(struct pcmcia_socket *sock, unsigned int *value) return 0; } -static void yenta_get_power(struct yenta_socket *socket, socket_state_t *state) -{ - if (!(cb_readl(socket, CB_SOCKET_STATE) & CB_CBCARD) && - (socket->flags & YENTA_16BIT_POWER_EXCA)) { - u8 reg, vcc, vpp; - - reg = exca_readb(socket, I365_POWER); - vcc = reg & I365_VCC_MASK; - vpp = reg & I365_VPP1_MASK; - state->Vcc = state->Vpp = 0; - - if (socket->flags & YENTA_16BIT_POWER_DF) { - if (vcc == I365_VCC_3V) - state->Vcc = 33; - if (vcc == I365_VCC_5V) - state->Vcc = 50; - if (vpp == I365_VPP1_5V) - state->Vpp = state->Vcc; - if (vpp == I365_VPP1_12V) - state->Vpp = 120; - } else { - if (reg & I365_VCC_5V) { - state->Vcc = 50; - if (vpp == I365_VPP1_5V) - state->Vpp = 50; - if (vpp == I365_VPP1_12V) - state->Vpp = 120; - } - } - } else { - u32 control; - - control = cb_readl(socket, CB_SOCKET_CONTROL); - - switch (control & CB_SC_VCC_MASK) { - case CB_SC_VCC_5V: state->Vcc = 50; break; - case CB_SC_VCC_3V: state->Vcc = 33; break; - default: state->Vcc = 0; - } - - switch (control & CB_SC_VPP_MASK) { - case CB_SC_VPP_12V: state->Vpp = 120; break; - case CB_SC_VPP_5V: state->Vpp = 50; break; - case CB_SC_VPP_3V: state->Vpp = 33; break; - default: state->Vpp = 0; - } - } -} - -static int yenta_get_socket(struct pcmcia_socket *sock, socket_state_t *state) -{ - struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket); - u8 reg; - u32 control; - - control = cb_readl(socket, CB_SOCKET_CONTROL); - - yenta_get_power(socket, state); - state->io_irq = socket->io_irq; - - if (cb_readl(socket, CB_SOCKET_STATE) & CB_CBCARD) { - u16 bridge = config_readw(socket, CB_BRIDGE_CONTROL); - if (bridge & CB_BRIDGE_CRST) - state->flags |= SS_RESET; - return 0; - } - - /* 16-bit card state.. */ - reg = exca_readb(socket, I365_POWER); - state->flags = (reg & I365_PWR_AUTO) ? SS_PWR_AUTO : 0; - state->flags |= (reg & I365_PWR_OUT) ? SS_OUTPUT_ENA : 0; - - reg = exca_readb(socket, I365_INTCTL); - state->flags |= (reg & I365_PC_RESET) ? 0 : SS_RESET; - state->flags |= (reg & I365_PC_IOCARD) ? SS_IOCARD : 0; - - reg = exca_readb(socket, I365_CSCINT); - state->csc_mask = (reg & I365_CSC_DETECT) ? SS_DETECT : 0; - if (state->flags & SS_IOCARD) { - state->csc_mask |= (reg & I365_CSC_STSCHG) ? SS_STSCHG : 0; - } else { - state->csc_mask |= (reg & I365_CSC_BVD1) ? SS_BATDEAD : 0; - state->csc_mask |= (reg & I365_CSC_BVD2) ? SS_BATWARN : 0; - state->csc_mask |= (reg & I365_CSC_READY) ? SS_READY : 0; - } - - return 0; -} - static void yenta_set_power(struct yenta_socket *socket, socket_state_t *state) { /* some birdges require to use the ExCA registers to power 16bit cards */ @@ -531,6 +448,9 @@ static irqreturn_t yenta_interrupt(int irq, void *dev_id, struct pt_regs *regs) csc = exca_readb(socket, I365_CSC); + if (!(cb_event || csc)) + return IRQ_NONE; + events = (cb_event & (CB_CD1EVENT | CB_CD2EVENT)) ? SS_DETECT : 0 ; events |= (csc & I365_CSC_DETECT) ? SS_DETECT : 0; if (exca_readb(socket, I365_INTCTL) & I365_PC_IOCARD) { @@ -544,10 +464,7 @@ static irqreturn_t yenta_interrupt(int irq, void *dev_id, struct pt_regs *regs) if (events) pcmcia_parse_events(&socket->socket, events); - if (cb_event || csc) - return IRQ_HANDLED; - - return IRQ_NONE; + return IRQ_HANDLED; } static void yenta_interrupt_wrapper(unsigned long data) @@ -828,17 +745,24 @@ static struct pccard_operations yenta_socket_operations = { .init = yenta_sock_init, .suspend = yenta_sock_suspend, .get_status = yenta_get_status, - .get_socket = yenta_get_socket, .set_socket = yenta_set_socket, .set_io_map = yenta_set_io_map, .set_mem_map = yenta_set_mem_map, }; +#ifdef CONFIG_YENTA_TI #include "ti113x.h" +#endif +#ifdef CONFIG_YENTA_RICOH #include "ricoh.h" +#endif +#ifdef CONFIG_YENTA_TOSHIBA #include "topic.h" +#endif +#ifdef CONFIG_YENTA_O2 #include "o2micro.h" +#endif enum { CARDBUS_TYPE_DEFAULT = -1, @@ -858,6 +782,7 @@ enum { * initialization sequences etc details. List them here.. */ static struct cardbus_type cardbus_type[] = { +#ifdef CONFIG_YENTA_TI [CARDBUS_TYPE_TI] = { .override = ti_override, .save_state = ti_save_state, @@ -882,27 +807,36 @@ static struct cardbus_type cardbus_type[] = { .restore_state = ti_restore_state, .sock_init = ti_init, }, +#endif +#ifdef CONFIG_YENTA_RICOH [CARDBUS_TYPE_RICOH] = { .override = ricoh_override, .save_state = ricoh_save_state, .restore_state = ricoh_restore_state, }, +#endif +#ifdef CONFIG_YENTA_TOSHIBA [CARDBUS_TYPE_TOPIC95] = { .override = topic95_override, }, [CARDBUS_TYPE_TOPIC97] = { .override = topic97_override, }, +#endif +#ifdef CONFIG_YENTA_O2 [CARDBUS_TYPE_O2MICRO] = { .override = o2micro_override, .restore_state = o2micro_restore_state, }, +#endif +#ifdef CONFIG_YENTA_TI [CARDBUS_TYPE_ENE] = { .override = ene_override, .save_state = ti_save_state, .restore_state = ti_restore_state, .sock_init = ti_init, }, +#endif }; @@ -948,6 +882,12 @@ static unsigned int yenta_probe_irq(struct yenta_socket *socket, u32 isa_irq_mas } +/** + * yenta PCI irq probing. + * currently only used in the TI/EnE initialization code + */ +#ifdef CONFIG_YENTA_TI + /* interrupt handler, only used during probing */ static irqreturn_t yenta_probe_handler(int irq, void *dev_id, struct pt_regs *regs) { @@ -1000,6 +940,7 @@ static int yenta_probe_cb_irq(struct yenta_socket *socket) return (int) socket->probe_status; } +#endif /* CONFIG_YENTA_TI */ /* @@ -1078,10 +1019,9 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i return -ENODEV; } - socket = kmalloc(sizeof(struct yenta_socket), GFP_KERNEL); + socket = kzalloc(sizeof(struct yenta_socket), GFP_KERNEL); if (!socket) return -ENOMEM; - memset(socket, 0, sizeof(*socket)); /* prepare pcmcia_socket */ socket->socket.ops = ¥ta_socket_operations; @@ -1263,6 +1203,7 @@ static struct pci_device_id yenta_table [] = { * advanced overrides instead. (I can't get the * data sheets for these devices. --rmk) */ +#ifdef CONFIG_YENTA_TI CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1210, TI), CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1130, TI113X), @@ -1305,18 +1246,25 @@ static struct pci_device_id yenta_table [] = { CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1225, ENE), CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1410, ENE), CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1420, ENE), +#endif /* CONFIG_YENTA_TI */ +#ifdef CONFIG_YENTA_RICOH CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C465, RICOH), CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C466, RICOH), CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C475, RICOH), CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, RICOH), CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C478, RICOH), +#endif +#ifdef CONFIG_YENTA_TOSHIBA CB_ID(PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_TOSHIBA_TOPIC95, TOPIC95), CB_ID(PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_TOSHIBA_TOPIC97, TOPIC97), CB_ID(PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_TOSHIBA_TOPIC100, TOPIC97), +#endif +#ifdef CONFIG_YENTA_O2 CB_ID(PCI_VENDOR_ID_O2, PCI_ANY_ID, O2MICRO), +#endif /* match any cardbus bridge */ CB_ID(PCI_ANY_ID, PCI_ANY_ID, DEFAULT), |