summaryrefslogtreecommitdiffstats
path: root/drivers/pcmcia/sa1111_neponset.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pcmcia/sa1111_neponset.c')
-rw-r--r--drivers/pcmcia/sa1111_neponset.c134
1 files changed, 134 insertions, 0 deletions
diff --git a/drivers/pcmcia/sa1111_neponset.c b/drivers/pcmcia/sa1111_neponset.c
new file mode 100644
index 000000000000..50f297d850e7
--- /dev/null
+++ b/drivers/pcmcia/sa1111_neponset.c
@@ -0,0 +1,134 @@
+/*
+ * linux/drivers/pcmcia/sa1100_neponset.c
+ *
+ * Neponset PCMCIA specific routines
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <mach/neponset.h>
+#include <asm/hardware/sa1111.h>
+
+#include "sa1111_generic.h"
+
+/*
+ * Neponset uses the Maxim MAX1600, with the following connections:
+ *
+ * MAX1600 Neponset
+ *
+ * A0VCC SA-1111 GPIO A<1>
+ * A1VCC SA-1111 GPIO A<0>
+ * A0VPP CPLD NCR A0VPP
+ * A1VPP CPLD NCR A1VPP
+ * B0VCC SA-1111 GPIO A<2>
+ * B1VCC SA-1111 GPIO A<3>
+ * B0VPP ground (slot B is CF)
+ * B1VPP ground (slot B is CF)
+ *
+ * VX VCC (5V)
+ * VY VCC3_3 (3.3V)
+ * 12INA 12V
+ * 12INB ground (slot B is CF)
+ *
+ * The MAX1600 CODE pin is tied to ground, placing the device in
+ * "Standard Intel code" mode. Refer to the Maxim data sheet for
+ * the corresponding truth table.
+ */
+
+static int
+neponset_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
+{
+ struct sa1111_pcmcia_socket *s = to_skt(skt);
+ unsigned int ncr_mask, ncr_set, pa_dwr_mask, pa_dwr_set;
+ int ret;
+
+ switch (skt->nr) {
+ case 0:
+ pa_dwr_mask = GPIO_A0 | GPIO_A1;
+ ncr_mask = NCR_A0VPP | NCR_A1VPP;
+
+ if (state->Vpp == 0)
+ ncr_set = 0;
+ else if (state->Vpp == 120)
+ ncr_set = NCR_A1VPP;
+ else if (state->Vpp == state->Vcc)
+ ncr_set = NCR_A0VPP;
+ else {
+ printk(KERN_ERR "%s(): unrecognized VPP %u\n",
+ __func__, state->Vpp);
+ return -1;
+ }
+ break;
+
+ case 1:
+ pa_dwr_mask = GPIO_A2 | GPIO_A3;
+ ncr_mask = 0;
+ ncr_set = 0;
+
+ if (state->Vpp != state->Vcc && state->Vpp != 0) {
+ printk(KERN_ERR "%s(): CF slot cannot support VPP %u\n",
+ __func__, state->Vpp);
+ return -1;
+ }
+ break;
+
+ default:
+ return -1;
+ }
+
+ /*
+ * pa_dwr_set is the mask for selecting Vcc on both sockets.
+ * pa_dwr_mask selects which bits (and therefore socket) we change.
+ */
+ switch (state->Vcc) {
+ default:
+ case 0: pa_dwr_set = 0; break;
+ case 33: pa_dwr_set = GPIO_A1|GPIO_A2; break;
+ case 50: pa_dwr_set = GPIO_A0|GPIO_A3; break;
+ }
+
+ ret = sa1111_pcmcia_configure_socket(skt, state);
+ if (ret == 0) {
+ unsigned long flags;
+
+ local_irq_save(flags);
+ NCR_0 = (NCR_0 & ~ncr_mask) | ncr_set;
+
+ local_irq_restore(flags);
+ sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set);
+ }
+
+ return ret;
+}
+
+static struct pcmcia_low_level neponset_pcmcia_ops = {
+ .owner = THIS_MODULE,
+ .configure_socket = neponset_pcmcia_configure_socket,
+ .first = 0,
+ .nr = 2,
+};
+
+int pcmcia_neponset_init(struct sa1111_dev *sadev)
+{
+ int ret = -ENODEV;
+
+ if (machine_is_assabet()) {
+ /*
+ * Set GPIO_A<3:0> to be outputs for the MAX1600,
+ * and switch to standby mode.
+ */
+ sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0);
+ sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
+ sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
+ sa11xx_drv_pcmcia_ops(&neponset_pcmcia_ops);
+ ret = sa1111_pcmcia_add(sadev, &neponset_pcmcia_ops,
+ sa11xx_drv_pcmcia_add_one);
+ }
+
+ return ret;
+}