diff options
Diffstat (limited to 'drivers/pci')
51 files changed, 2825 insertions, 453 deletions
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index c32a77fc8b03..90944667ccea 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -29,6 +29,15 @@ config PCI_MSI_IRQ_DOMAIN depends on PCI_MSI select GENERIC_MSI_IRQ_DOMAIN +config PCI_QUIRKS + default y + bool "Enable PCI quirk workarounds" if EXPERT + depends on PCI + help + This enables workarounds for various PCI chipset bugs/quirks. + Disable this only if your target machine is unaffected by PCI + quirks. + config PCI_DEBUG bool "PCI Debugging" depends on PCI && DEBUG_KERNEL @@ -42,13 +51,13 @@ config PCI_DEBUG config PCI_REALLOC_ENABLE_AUTO bool "Enable PCI resource re-allocation detection" depends on PCI + depends on PCI_IOV help Say Y here if you want the PCI core to detect if PCI resource re-allocation needs to be enabled. You can always use pci=realloc=on - or pci=realloc=off to override it. Note this feature is a no-op - unless PCI_IOV support is also enabled; in that case it will - automatically re-allocate PCI resources if SR-IOV BARs have not - been allocated by the BIOS. + or pci=realloc=off to override it. It will automatically + re-allocate PCI resources if SR-IOV BARs have not been allocated by + the BIOS. When in doubt, say N. diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 80adbdbcecce..3d5e047f0a32 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -17,9 +17,6 @@ obj-$(CONFIG_PCIEPORTBUS) += pcie/ # Build the PCI Hotplug drivers if we were asked to obj-$(CONFIG_HOTPLUG_PCI) += hotplug/ -ifdef CONFIG_HOTPLUG_PCI -obj-y += hotplug-pci.o -endif # Build the PCI MSI interrupt support obj-$(CONFIG_PCI_MSI) += msi.o diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig index 22ec82fcdea2..113e09440f85 100644 --- a/drivers/pci/dwc/Kconfig +++ b/drivers/pci/dwc/Kconfig @@ -169,4 +169,14 @@ config PCIE_KIRIN Say Y here if you want PCIe controller support on HiSilicon Kirin series SoCs. +config PCIE_HISI_STB + bool "HiSilicon STB SoCs PCIe controllers" + depends on ARCH_HISI + depends on PCI + depends on PCI_MSI_IRQ_DOMAIN + select PCIEPORTBUS + select PCIE_DW_HOST + help + Say Y here if you want PCIe controller support on HiSilicon STB SoCs + endmenu diff --git a/drivers/pci/dwc/Makefile b/drivers/pci/dwc/Makefile index e73661182da0..41ba499c96ee 100644 --- a/drivers/pci/dwc/Makefile +++ b/drivers/pci/dwc/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o obj-$(CONFIG_PCIE_KIRIN) += pcie-kirin.o +obj-$(CONFIG_PCIE_HISI_STB) += pcie-histb.o # The following drivers are for devices that use the generic ACPI # pci_root.c driver but don't support standard ECAM config access. diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c index 362607f727ee..e77a4ceed74c 100644 --- a/drivers/pci/dwc/pci-dra7xx.c +++ b/drivers/pci/dwc/pci-dra7xx.c @@ -810,6 +810,22 @@ static int dra7xx_pcie_resume_noirq(struct device *dev) } #endif +void dra7xx_pcie_shutdown(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct dra7xx_pcie *dra7xx = dev_get_drvdata(dev); + int ret; + + dra7xx_pcie_stop_link(dra7xx->pci); + + ret = pm_runtime_put_sync(dev); + if (ret < 0) + dev_dbg(dev, "pm_runtime_put_sync failed\n"); + + pm_runtime_disable(dev); + dra7xx_pcie_disable_phy(dra7xx); +} + static const struct dev_pm_ops dra7xx_pcie_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(dra7xx_pcie_suspend, dra7xx_pcie_resume) SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(dra7xx_pcie_suspend_noirq, @@ -823,5 +839,6 @@ static struct platform_driver dra7xx_pcie_driver = { .suppress_bind_attrs = true, .pm = &dra7xx_pcie_pm_ops, }, + .shutdown = dra7xx_pcie_shutdown, }; builtin_platform_driver_probe(dra7xx_pcie_driver, dra7xx_pcie_probe); diff --git a/drivers/pci/dwc/pci-layerscape.c b/drivers/pci/dwc/pci-layerscape.c index 87fa486bee2c..8f34c2fdc600 100644 --- a/drivers/pci/dwc/pci-layerscape.c +++ b/drivers/pci/dwc/pci-layerscape.c @@ -33,6 +33,8 @@ /* PEX Internal Configuration Registers */ #define PCIE_STRFMR1 0x71c /* Symbol Timer & Filter Mask Register1 */ +#define PCIE_ABSERR 0x8d0 /* Bridge Slave Error Response Register */ +#define PCIE_ABSERR_SETTING 0x9401 /* Forward error of non-posted request */ #define PCIE_IATU_NUM 6 @@ -124,6 +126,14 @@ static int ls_pcie_link_up(struct dw_pcie *pci) return 1; } +/* Forward error response of outbound non-posted requests */ +static void ls_pcie_fix_error_response(struct ls_pcie *pcie) +{ + struct dw_pcie *pci = pcie->pci; + + iowrite32(PCIE_ABSERR_SETTING, pci->dbi_base + PCIE_ABSERR); +} + static int ls_pcie_host_init(struct pcie_port *pp) { struct dw_pcie *pci = to_dw_pcie_from_pp(pp); @@ -135,6 +145,7 @@ static int ls_pcie_host_init(struct pcie_port *pp) * dw_pcie_setup_rc() will reconfigure the outbound windows. */ ls_pcie_disable_outbound_atus(pcie); + ls_pcie_fix_error_response(pcie); dw_pcie_dbi_ro_wr_en(pci); ls_pcie_clear_multifunction(pcie); @@ -253,6 +264,7 @@ static struct ls_pcie_drvdata ls2088_drvdata = { }; static const struct of_device_id ls_pcie_of_match[] = { + { .compatible = "fsl,ls1012a-pcie", .data = &ls1046_drvdata }, { .compatible = "fsl,ls1021a-pcie", .data = &ls1021_drvdata }, { .compatible = "fsl,ls1043a-pcie", .data = &ls1043_drvdata }, { .compatible = "fsl,ls1046a-pcie", .data = &ls1046_drvdata }, diff --git a/drivers/pci/dwc/pcie-histb.c b/drivers/pci/dwc/pcie-histb.c new file mode 100644 index 000000000000..33b01b734d7d --- /dev/null +++ b/drivers/pci/dwc/pcie-histb.c @@ -0,0 +1,470 @@ +/* + * PCIe host controller driver for HiSilicon STB SoCs + * + * Copyright (C) 2016-2017 HiSilicon Co., Ltd. http://www.hisilicon.com + * + * Authors: Ruqiang Ju <juruqiang@hisilicon.com> + * Jianguo Sun <sunjianguo1@huawei.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/pci.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/resource.h> +#include <linux/reset.h> + +#include "pcie-designware.h" + +#define to_histb_pcie(x) dev_get_drvdata((x)->dev) + +#define PCIE_SYS_CTRL0 0x0000 +#define PCIE_SYS_CTRL1 0x0004 +#define PCIE_SYS_CTRL7 0x001C +#define PCIE_SYS_CTRL13 0x0034 +#define PCIE_SYS_CTRL15 0x003C +#define PCIE_SYS_CTRL16 0x0040 +#define PCIE_SYS_CTRL17 0x0044 + +#define PCIE_SYS_STAT0 0x0100 +#define PCIE_SYS_STAT4 0x0110 + +#define PCIE_RDLH_LINK_UP BIT(5) +#define PCIE_XMLH_LINK_UP BIT(15) +#define PCIE_ELBI_SLV_DBI_ENABLE BIT(21) +#define PCIE_APP_LTSSM_ENABLE BIT(11) + +#define PCIE_DEVICE_TYPE_MASK GENMASK(31, 28) +#define PCIE_WM_EP 0 +#define PCIE_WM_LEGACY BIT(1) +#define PCIE_WM_RC BIT(30) + +#define PCIE_LTSSM_STATE_MASK GENMASK(5, 0) +#define PCIE_LTSSM_STATE_ACTIVE 0x11 + +struct histb_pcie { + struct dw_pcie *pci; + struct clk *aux_clk; + struct clk *pipe_clk; + struct clk *sys_clk; + struct clk *bus_clk; + struct phy *phy; + struct reset_control *soft_reset; + struct reset_control *sys_reset; + struct reset_control *bus_reset; + void __iomem *ctrl; + int reset_gpio; +}; + +static u32 histb_pcie_readl(struct histb_pcie *histb_pcie, u32 reg) +{ + return readl(histb_pcie->ctrl + reg); +} + +static void histb_pcie_writel(struct histb_pcie *histb_pcie, u32 reg, u32 val) +{ + writel(val, histb_pcie->ctrl + reg); +} + +static void histb_pcie_dbi_w_mode(struct pcie_port *pp, bool enable) +{ + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct histb_pcie *hipcie = to_histb_pcie(pci); + u32 val; + + val = histb_pcie_readl(hipcie, PCIE_SYS_CTRL0); + if (enable) + val |= PCIE_ELBI_SLV_DBI_ENABLE; + else + val &= ~PCIE_ELBI_SLV_DBI_ENABLE; + histb_pcie_writel(hipcie, PCIE_SYS_CTRL0, val); +} + +static void histb_pcie_dbi_r_mode(struct pcie_port *pp, bool enable) +{ + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct histb_pcie *hipcie = to_histb_pcie(pci); + u32 val; + + val = histb_pcie_readl(hipcie, PCIE_SYS_CTRL1); + if (enable) + val |= PCIE_ELBI_SLV_DBI_ENABLE; + else + val &= ~PCIE_ELBI_SLV_DBI_ENABLE; + histb_pcie_writel(hipcie, PCIE_SYS_CTRL1, val); +} + +static u32 histb_pcie_read_dbi(struct dw_pcie *pci, void __iomem *base, + u32 reg, size_t size) +{ + u32 val; + + histb_pcie_dbi_r_mode(&pci->pp, true); + dw_pcie_read(base + reg, size, &val); + histb_pcie_dbi_r_mode(&pci->pp, false); + + return val; +} + +static void histb_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base, + u32 reg, size_t size, u32 val) +{ + histb_pcie_dbi_w_mode(&pci->pp, true); + dw_pcie_write(base + reg, size, val); + histb_pcie_dbi_w_mode(&pci->pp, false); +} + +static int histb_pcie_rd_own_conf(struct pcie_port *pp, int where, + int size, u32 *val) +{ + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + int ret; + + histb_pcie_dbi_r_mode(pp, true); + ret = dw_pcie_read(pci->dbi_base + where, size, val); + histb_pcie_dbi_r_mode(pp, false); + + return ret; +} + +static int histb_pcie_wr_own_conf(struct pcie_port *pp, int where, + int size, u32 val) +{ + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + int ret; + + histb_pcie_dbi_w_mode(pp, true); + ret = dw_pcie_write(pci->dbi_base + where, size, val); + histb_pcie_dbi_w_mode(pp, false); + + return ret; +} + +static int histb_pcie_link_up(struct dw_pcie *pci) +{ + struct histb_pcie *hipcie = to_histb_pcie(pci); + u32 regval; + u32 status; + + regval = histb_pcie_readl(hipcie, PCIE_SYS_STAT0); + status = histb_pcie_readl(hipcie, PCIE_SYS_STAT4); + status &= PCIE_LTSSM_STATE_MASK; + if ((regval & PCIE_XMLH_LINK_UP) && (regval & PCIE_RDLH_LINK_UP) && + (status == PCIE_LTSSM_STATE_ACTIVE)) + return 1; + + return 0; +} + +static int histb_pcie_establish_link(struct pcie_port *pp) +{ + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct histb_pcie *hipcie = to_histb_pcie(pci); + u32 regval; + + if (dw_pcie_link_up(pci)) { + dev_info(pci->dev, "Link already up\n"); + return 0; + } + + /* PCIe RC work mode */ + regval = histb_pcie_readl(hipcie, PCIE_SYS_CTRL0); + regval &= ~PCIE_DEVICE_TYPE_MASK; + regval |= PCIE_WM_RC; + histb_pcie_writel(hipcie, PCIE_SYS_CTRL0, regval); + + /* setup root complex */ + dw_pcie_setup_rc(pp); + + /* assert LTSSM enable */ + regval = histb_pcie_readl(hipcie, PCIE_SYS_CTRL7); + regval |= PCIE_APP_LTSSM_ENABLE; + histb_pcie_writel(hipcie, PCIE_SYS_CTRL7, regval); + + return dw_pcie_wait_for_link(pci); +} + +static int histb_pcie_host_init(struct pcie_port *pp) +{ + histb_pcie_establish_link(pp); + + if (IS_ENABLED(CONFIG_PCI_MSI)) + dw_pcie_msi_init(pp); + + return 0; +} + +static struct dw_pcie_host_ops histb_pcie_host_ops = { + .rd_own_conf = histb_pcie_rd_own_conf, + .wr_own_conf = histb_pcie_wr_own_conf, + .host_init = histb_pcie_host_init, +}; + +static irqreturn_t histb_pcie_msi_irq_handler(int irq, void *arg) +{ + struct pcie_port *pp = arg; + + return dw_handle_msi_irq(pp); +} + +static void histb_pcie_host_disable(struct histb_pcie *hipcie) +{ + reset_control_assert(hipcie->soft_reset); + reset_control_assert(hipcie->sys_reset); + reset_control_assert(hipcie->bus_reset); + + clk_disable_unprepare(hipcie->aux_clk); + clk_disable_unprepare(hipcie->pipe_clk); + clk_disable_unprepare(hipcie->sys_clk); + clk_disable_unprepare(hipcie->bus_clk); + + if (gpio_is_valid(hipcie->reset_gpio)) + gpio_set_value_cansleep(hipcie->reset_gpio, 0); +} + +static int histb_pcie_host_enable(struct pcie_port *pp) +{ + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct histb_pcie *hipcie = to_histb_pcie(pci); + struct device *dev = pci->dev; + int ret; + + /* power on PCIe device if have */ + if (gpio_is_valid(hipcie->reset_gpio)) + gpio_set_value_cansleep(hipcie->reset_gpio, 1); + + ret = clk_prepare_enable(hipcie->bus_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable bus clk\n"); + goto err_bus_clk; + } + + ret = clk_prepare_enable(hipcie->sys_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable sys clk\n"); + goto err_sys_clk; + } + + ret = clk_prepare_enable(hipcie->pipe_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable pipe clk\n"); + goto err_pipe_clk; + } + + ret = clk_prepare_enable(hipcie->aux_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable aux clk\n"); + goto err_aux_clk; + } + + reset_control_assert(hipcie->soft_reset); + reset_control_deassert(hipcie->soft_reset); + + reset_control_assert(hipcie->sys_reset); + reset_control_deassert(hipcie->sys_reset); + + reset_control_assert(hipcie->bus_reset); + reset_control_deassert(hipcie->bus_reset); + + return 0; + +err_aux_clk: + clk_disable_unprepare(hipcie->aux_clk); +err_pipe_clk: + clk_disable_unprepare(hipcie->pipe_clk); +err_sys_clk: + clk_disable_unprepare(hipcie->sys_clk); +err_bus_clk: + clk_disable_unprepare(hipcie->bus_clk); + + return ret; +} + +static const struct dw_pcie_ops dw_pcie_ops = { + .read_dbi = histb_pcie_read_dbi, + .write_dbi = histb_pcie_write_dbi, + .link_up = histb_pcie_link_up, +}; + +static int histb_pcie_probe(struct platform_device *pdev) +{ + struct histb_pcie *hipcie; + struct dw_pcie *pci; + struct pcie_port *pp; + struct resource *res; + struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + enum of_gpio_flags of_flags; + unsigned long flag = GPIOF_DIR_OUT; + int ret; + + hipcie = devm_kzalloc(dev, sizeof(*hipcie), GFP_KERNEL); + if (!hipcie) + return -ENOMEM; + + pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL); + if (!pci) + return -ENOMEM; + + hipcie->pci = pci; + pp = &pci->pp; + pci->dev = dev; + pci->ops = &dw_pcie_ops; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "control"); + hipcie->ctrl = devm_ioremap_resource(dev, res); + if (IS_ERR(hipcie->ctrl)) { + dev_err(dev, "cannot get control reg base\n"); + return PTR_ERR(hipcie->ctrl); + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rc-dbi"); + pci->dbi_base = devm_ioremap_resource(dev, res); + if (IS_ERR(pci->dbi_base)) { + dev_err(dev, "cannot get rc-dbi base\n"); + return PTR_ERR(pci->dbi_base); + } + + hipcie->reset_gpio = of_get_named_gpio_flags(np, + "reset-gpios", 0, &of_flags); + if (of_flags & OF_GPIO_ACTIVE_LOW) + flag |= GPIOF_ACTIVE_LOW; + if (gpio_is_valid(hipcie->reset_gpio)) { + ret = devm_gpio_request_one(dev, hipcie->reset_gpio, + flag, "PCIe device power control"); + if (ret) { + dev_err(dev, "unable to request gpio\n"); + return ret; + } + } + + hipcie->aux_clk = devm_clk_get(dev, "aux"); + if (IS_ERR(hipcie->aux_clk)) { + dev_err(dev, "Failed to get PCIe aux clk\n"); + return PTR_ERR(hipcie->aux_clk); + } + + hipcie->pipe_clk = devm_clk_get(dev, "pipe"); + if (IS_ERR(hipcie->pipe_clk)) { + dev_err(dev, "Failed to get PCIe pipe clk\n"); + return PTR_ERR(hipcie->pipe_clk); + } + + hipcie->sys_clk = devm_clk_get(dev, "sys"); + if (IS_ERR(hipcie->sys_clk)) { + dev_err(dev, "Failed to get PCIEe sys clk\n"); + return PTR_ERR(hipcie->sys_clk); + } + + hipcie->bus_clk = devm_clk_get(dev, "bus"); + if (IS_ERR(hipcie->bus_clk)) { + dev_err(dev, "Failed to get PCIe bus clk\n"); + return PTR_ERR(hipcie->bus_clk); + } + + hipcie->soft_reset = devm_reset_control_get(dev, "soft"); + if (IS_ERR(hipcie->soft_reset)) { + dev_err(dev, "couldn't get soft reset\n"); + return PTR_ERR(hipcie->soft_reset); + } + + hipcie->sys_reset = devm_reset_control_get(dev, "sys"); + if (IS_ERR(hipcie->sys_reset)) { + dev_err(dev, "couldn't get sys reset\n"); + return PTR_ERR(hipcie->sys_reset); + } + + hipcie->bus_reset = devm_reset_control_get(dev, "bus"); + if (IS_ERR(hipcie->bus_reset)) { + dev_err(dev, "couldn't get bus reset\n"); + return PTR_ERR(hipcie->bus_reset); + } + + if (IS_ENABLED(CONFIG_PCI_MSI)) { + pp->msi_irq = platform_get_irq_byname(pdev, "msi"); + if (pp->msi_irq < 0) { + dev_err(dev, "Failed to get MSI IRQ\n"); + return pp->msi_irq; + } + + ret = devm_request_irq(dev, pp->msi_irq, + histb_pcie_msi_irq_handler, + IRQF_SHARED, "histb-pcie-msi", pp); + if (ret) { + dev_err(dev, "cannot request MSI IRQ\n"); + return ret; + } + } + + hipcie->phy = devm_phy_get(dev, "phy"); + if (IS_ERR(hipcie->phy)) { + dev_info(dev, "no pcie-phy found\n"); + hipcie->phy = NULL; + /* fall through here! + * if no pcie-phy found, phy init + * should be done under boot! + */ + } else { + phy_init(hipcie->phy); + } + + pp->root_bus_nr = -1; + pp->ops = &histb_pcie_host_ops; + + platform_set_drvdata(pdev, hipcie); + + ret = histb_pcie_host_enable(pp); + if (ret) { + dev_err(dev, "failed to enable host\n"); + return ret; + } + + ret = dw_pcie_host_init(pp); + if (ret) { + dev_err(dev, "failed to initialize host\n"); + return ret; + } + + return 0; +} + +static int histb_pcie_remove(struct platform_device *pdev) +{ + struct histb_pcie *hipcie = platform_get_drvdata(pdev); + + histb_pcie_host_disable(hipcie); + + if (hipcie->phy) + phy_exit(hipcie->phy); + + return 0; +} + +static const struct of_device_id histb_pcie_of_match[] = { + { .compatible = "hisilicon,hi3798cv200-pcie", }, + {}, +}; +MODULE_DEVICE_TABLE(of, histb_pcie_of_match); + +static struct platform_driver histb_pcie_platform_driver = { + .probe = histb_pcie_probe, + .remove = histb_pcie_remove, + .driver = { + .name = "histb-pcie", + .of_match_table = histb_pcie_of_match, + }, +}; +module_platform_driver(histb_pcie_platform_driver); + +MODULE_DESCRIPTION("HiSilicon STB PCIe host controller driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index b868803792d8..38d12980db0f 100644 --- a/drivers/pci/host/Kconfig +++ b/drivers/pci/host/Kconfig @@ -95,6 +95,12 @@ config PCI_XGENE_MSI Say Y here if you want PCIe MSI support for the APM X-Gene v1 SoC. This MSI driver supports 5 PCIe ports on the APM X-Gene v1 SoC. +config PCI_V3_SEMI + bool "V3 Semiconductor PCI controller" + depends on OF + depends on ARM + default ARCH_INTEGRATOR_AP + config PCI_VERSATILE bool "ARM Versatile PB PCI controller" depends on ARCH_VERSATILE diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile index 95f5b80ca52a..34ec1d88f961 100644 --- a/drivers/pci/host/Makefile +++ b/drivers/pci/host/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_PCI_HOST_COMMON) += pci-host-common.o obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o obj-$(CONFIG_PCIE_XILINX_NWL) += pcie-xilinx-nwl.o +obj-$(CONFIG_PCI_V3_SEMI) += pci-v3-semi.o obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o diff --git a/drivers/pci/host/pci-ftpci100.c b/drivers/pci/host/pci-ftpci100.c index 4ea7d2ebcc5c..b9617d1c1d48 100644 --- a/drivers/pci/host/pci-ftpci100.c +++ b/drivers/pci/host/pci-ftpci100.c @@ -371,24 +371,6 @@ static int faraday_pci_setup_cascaded_irq(struct faraday_pci *p) return 0; } -static int pci_dma_range_parser_init(struct of_pci_range_parser *parser, - struct device_node *node) -{ - const int na = 3, ns = 2; - int rlen; - - parser->node = node; - parser->pna = of_n_addr_cells(node); - parser->np = parser->pna + na + ns; - - parser->range = of_get_property(node, "dma-ranges", &rlen); - if (!parser->range) - return -ENOENT; - parser->end = parser->range + rlen / sizeof(__be32); - - return 0; -} - static int faraday_pci_parse_map_dma_ranges(struct faraday_pci *p, struct device_node *np) { @@ -403,7 +385,7 @@ static int faraday_pci_parse_map_dma_ranges(struct faraday_pci *p, int i = 0; u32 val; - if (pci_dma_range_parser_init(&parser, np)) { + if (of_pci_dma_range_parser_init(&parser, np)) { dev_err(dev, "missing dma-ranges property\n"); return -EINVAL; } @@ -482,7 +464,7 @@ static int faraday_pci_probe(struct platform_device *pdev) } p->bus_clk = devm_clk_get(dev, "PCICLK"); if (IS_ERR(p->bus_clk)) - return PTR_ERR(clk); + return PTR_ERR(p->bus_clk); ret = clk_prepare_enable(p->bus_clk); if (ret) { dev_err(dev, "could not prepare PCICLK\n"); diff --git a/drivers/pci/host/pci-host-generic.c b/drivers/pci/host/pci-host-generic.c index 7d709a7e0aa8..2f05511ce718 100644 --- a/drivers/pci/host/pci-host-generic.c +++ b/drivers/pci/host/pci-host-generic.c @@ -35,6 +35,40 @@ static struct pci_ecam_ops gen_pci_cfg_cam_bus_ops = { } }; +static bool pci_dw_valid_device(struct pci_bus *bus, unsigned int devfn) +{ + struct pci_config_window *cfg = bus->sysdata; + + /* + * The Synopsys DesignWare PCIe controller in ECAM mode will not filter + * type 0 config TLPs sent to devices 1 and up on its downstream port, + * resulting in devices appearing multiple times on bus 0 unless we + * filter out those accesses here. + */ + if (bus->number == cfg->busr.start && PCI_SLOT(devfn) > 0) + return false; + + return true; +} + +static void __iomem *pci_dw_ecam_map_bus(struct pci_bus *bus, + unsigned int devfn, int where) +{ + if (!pci_dw_valid_device(bus, devfn)) + return NULL; + + return pci_ecam_map_bus(bus, devfn, where); +} + +static struct pci_ecam_ops pci_dw_ecam_bus_ops = { + .bus_shift = 20, + .pci_ops = { + .map_bus = pci_dw_ecam_map_bus, + .read = pci_generic_config_read, + .write = pci_generic_config_write, + } +}; + static const struct of_device_id gen_pci_of_match[] = { { .compatible = "pci-host-cam-generic", .data = &gen_pci_cfg_cam_bus_ops }, @@ -42,6 +76,15 @@ static const struct of_device_id gen_pci_of_match[] = { { .compatible = "pci-host-ecam-generic", .data = &pci_generic_ecam_ops }, + { .compatible = "marvell,armada8k-pcie-ecam", + .data = &pci_dw_ecam_bus_ops }, + + { .compatible = "socionext,synquacer-pcie-ecam", + .data = &pci_dw_ecam_bus_ops }, + + { .compatible = "snps,dw-pcie-ecam", + .data = &pci_dw_ecam_bus_ops }, + { }, }; diff --git a/drivers/pci/host/pci-hyperv.c b/drivers/pci/host/pci-hyperv.c index 0fe3ea164ee5..04dac6a42c9f 100644 --- a/drivers/pci/host/pci-hyperv.c +++ b/drivers/pci/host/pci-hyperv.c @@ -879,7 +879,7 @@ static void hv_irq_unmask(struct irq_data *data) int cpu; u64 res; - dest = irq_data_get_affinity_mask(data); + dest = irq_data_get_effective_affinity_mask(data); pdev = msi_desc_to_pci_dev(msi_desc); pbus = pdev->bus; hbus = container_of(pbus->sysdata, struct hv_pcibus_device, sysdata); @@ -1042,6 +1042,7 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) struct hv_pci_dev *hpdev; struct pci_bus *pbus; struct pci_dev *pdev; + struct cpumask *dest; struct compose_comp_ctxt comp; struct tran_int_desc *int_desc; struct { @@ -1056,6 +1057,7 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) int ret; pdev = msi_desc_to_pci_dev(irq_data_get_msi_desc(data)); + dest = irq_data_get_effective_affinity_mask(data); pbus = pdev->bus; hbus = container_of(pbus->sysdata, struct hv_pcibus_device, sysdata); hpdev = get_pcichild_wslot(hbus, devfn_to_wslot(pdev->devfn)); @@ -1081,14 +1083,14 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) switch (pci_protocol_version) { case PCI_PROTOCOL_VERSION_1_1: size = hv_compose_msi_req_v1(&ctxt.int_pkts.v1, - irq_data_get_affinity_mask(data), + dest, hpdev->desc.win_slot.slot, cfg->vector); break; case PCI_PROTOCOL_VERSION_1_2: size = hv_compose_msi_req_v2(&ctxt.int_pkts.v2, - irq_data_get_affinity_mask(data), + dest, hpdev->desc.win_slot.slot, cfg->vector); break; diff --git a/drivers/pci/host/pci-rcar-gen2.c b/drivers/pci/host/pci-rcar-gen2.c index 6f879685fedd..e46de69f0380 100644 --- a/drivers/pci/host/pci-rcar-gen2.c +++ b/drivers/pci/host/pci-rcar-gen2.c @@ -293,24 +293,6 @@ static struct pci_ops rcar_pci_ops = { .write = pci_generic_config_write, }; -static int pci_dma_range_parser_init(struct of_pci_range_parser *parser, - struct device_node *node) -{ - const int na = 3, ns = 2; - int rlen; - - parser->node = node; - parser->pna = of_n_addr_cells(node); - parser->np = parser->pna + na + ns; - - parser->range = of_get_property(node, "dma-ranges", &rlen); - if (!parser->range) - return -ENOENT; - - parser->end = parser->range + rlen / sizeof(__be32); - return 0; -} - static int rcar_pci_parse_map_dma_ranges(struct rcar_pci_priv *pci, struct device_node *np) { @@ -320,7 +302,7 @@ static int rcar_pci_parse_map_dma_ranges(struct rcar_pci_priv *pci, int index = 0; /* Failure to parse is ok as we fall back to defaults */ - if (pci_dma_range_parser_init(&parser, np)) + if (of_pci_dma_range_parser_init(&parser, np)) return 0; /* Get the dma-ranges from DT */ diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c index 1987fec1f126..f9d3960dc39f 100644 --- a/drivers/pci/host/pci-tegra.c +++ b/drivers/pci/host/pci-tegra.c @@ -159,10 +159,13 @@ #define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_SINGLE (0x0 << 20) #define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_420 (0x0 << 20) #define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_X2_X1 (0x0 << 20) +#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_401 (0x0 << 20) #define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL (0x1 << 20) #define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_222 (0x1 << 20) #define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_X4_X1 (0x1 << 20) +#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_211 (0x1 << 20) #define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_411 (0x2 << 20) +#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_111 (0x2 << 20) #define AFI_FUSE 0x104 #define AFI_FUSE_PCIE_T0_GEN2_DIS (1 << 2) @@ -253,6 +256,7 @@ struct tegra_pcie_soc { bool has_cml_clk; bool has_gen2; bool force_pca_enable; + bool program_uphy; }; static inline struct tegra_msi *to_tegra_msi(struct msi_controller *chip) @@ -492,12 +496,32 @@ static void __iomem *tegra_pcie_map_bus(struct pci_bus *bus, return addr; } +static int tegra_pcie_config_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *value) +{ + if (bus->number == 0) + return pci_generic_config_read32(bus, devfn, where, size, + value); + + return pci_generic_config_read(bus, devfn, where, size, value); +} + +static int tegra_pcie_config_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 value) +{ + if (bus->number == 0) + return pci_generic_config_write32(bus, devfn, where, size, + value); + + return pci_generic_config_write(bus, devfn, where, size, value); +} + static struct pci_ops tegra_pcie_ops = { .add_bus = tegra_pcie_add_bus, .remove_bus = tegra_pcie_remove_bus, .map_bus = tegra_pcie_map_bus, - .read = pci_generic_config_read32, - .write = pci_generic_config_write32, + .read = tegra_pcie_config_read, + .write = tegra_pcie_config_write, }; static unsigned long tegra_pcie_port_get_pex_ctrl(struct tegra_pcie_port *port) @@ -1013,10 +1037,12 @@ static int tegra_pcie_enable_controller(struct tegra_pcie *pcie) afi_writel(pcie, value, AFI_FUSE); } - err = tegra_pcie_phy_power_on(pcie); - if (err < 0) { - dev_err(dev, "failed to power on PHY(s): %d\n", err); - return err; + if (soc->program_uphy) { + err = tegra_pcie_phy_power_on(pcie); + if (err < 0) { + dev_err(dev, "failed to power on PHY(s): %d\n", err); + return err; + } } /* take the PCIe interface module out of reset */ @@ -1049,19 +1075,23 @@ static int tegra_pcie_enable_controller(struct tegra_pcie *pcie) static void tegra_pcie_power_off(struct tegra_pcie *pcie) { struct device *dev = pcie->dev; + const struct tegra_pcie_soc *soc = pcie->soc; int err; /* TODO: disable and unprepare clocks? */ - err = tegra_pcie_phy_power_off(pcie); - if (err < 0) - dev_err(dev, "failed to power off PHY(s): %d\n", err); + if (soc->program_uphy) { + err = tegra_pcie_phy_power_off(pcie); + if (err < 0) + dev_err(dev, "failed to power off PHY(s): %d\n", err); + } reset_control_assert(pcie->pcie_xrst); reset_control_assert(pcie->afi_rst); reset_control_assert(pcie->pex_rst); - tegra_powergate_power_off(TEGRA_POWERGATE_PCIE); + if (!dev->pm_domain) + tegra_powergate_power_off(TEGRA_POWERGATE_PCIE); err = regulator_bulk_disable(pcie->num_supplies, pcie->supplies); if (err < 0) @@ -1078,19 +1108,29 @@ static int tegra_pcie_power_on(struct tegra_pcie *pcie) reset_control_assert(pcie->afi_rst); reset_control_assert(pcie->pex_rst); - tegra_powergate_power_off(TEGRA_POWERGATE_PCIE); + if (!dev->pm_domain) + tegra_powergate_power_off(TEGRA_POWERGATE_PCIE); /* enable regulators */ err = regulator_bulk_enable(pcie->num_supplies, pcie->supplies); if (err < 0) dev_err(dev, "failed to enable regulators: %d\n", err); - err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_PCIE, - pcie->pex_clk, - pcie->pex_rst); - if (err) { - dev_err(dev, "powerup sequence failed: %d\n", err); - return err; + if (dev->pm_domain) { + err = clk_prepare_enable(pcie->pex_clk); + if (err) { + dev_err(dev, "failed to enable PEX clock: %d\n", err); + return err; + } + reset_control_deassert(pcie->pex_rst); + } else { + err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_PCIE, + pcie->pex_clk, + pcie->pex_rst); + if (err) { + dev_err(dev, "powerup sequence failed: %d\n", err); + return err; + } } reset_control_deassert(pcie->afi_rst); @@ -1263,6 +1303,7 @@ static int tegra_pcie_get_resources(struct tegra_pcie *pcie) struct device *dev = pcie->dev; struct platform_device *pdev = to_platform_device(dev); struct resource *pads, *afi, *res; + const struct tegra_pcie_soc *soc = pcie->soc; int err; err = tegra_pcie_clocks_get(pcie); @@ -1277,10 +1318,12 @@ static int tegra_pcie_get_resources(struct tegra_pcie *pcie) return err; } - err = tegra_pcie_phys_get(pcie); - if (err < 0) { - dev_err(dev, "failed to get PHYs: %d\n", err); - return err; + if (soc->program_uphy) { + err = tegra_pcie_phys_get(pcie); + if (err < 0) { + dev_err(dev, "failed to get PHYs: %d\n", err); + return err; + } } err = tegra_pcie_power_on(pcie); @@ -1342,6 +1385,7 @@ poweroff: static int tegra_pcie_put_resources(struct tegra_pcie *pcie) { struct device *dev = pcie->dev; + const struct tegra_pcie_soc *soc = pcie->soc; int err; if (pcie->irq > 0) @@ -1349,9 +1393,11 @@ static int tegra_pcie_put_resources(struct tegra_pcie *pcie) tegra_pcie_power_off(pcie); - err = phy_exit(pcie->phy); - if (err < 0) - dev_err(dev, "failed to teardown PHY: %d\n", err); + if (soc->program_uphy) { + err = phy_exit(pcie->phy); + if (err < 0) + dev_err(dev, "failed to teardown PHY: %d\n", err); + } return 0; } @@ -1606,8 +1652,32 @@ static int tegra_pcie_get_xbar_config(struct tegra_pcie *pcie, u32 lanes, struct device *dev = pcie->dev; struct device_node *np = dev->of_node; - if (of_device_is_compatible(np, "nvidia,tegra124-pcie") || - of_device_is_compatible(np, "nvidia,tegra210-pcie")) { + if (of_device_is_compatible(np, "nvidia,tegra186-pcie")) { + switch (lanes) { + case 0x010004: + dev_info(dev, "4x1, 1x1 configuration\n"); + *xbar = AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_401; + return 0; + + case 0x010102: + dev_info(dev, "2x1, 1X1, 1x1 configuration\n"); + *xbar = AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_211; + return 0; + + case 0x010101: + dev_info(dev, "1x1, 1x1, 1x1 configuration\n"); + *xbar = AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_111; + return 0; + + default: + dev_info(dev, "wrong configuration updated in DT, " + "switching to default 2x1, 1x1, 1x1 " + "configuration\n"); + *xbar = AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_211; + return 0; + } + } else if (of_device_is_compatible(np, "nvidia,tegra124-pcie") || + of_device_is_compatible(np, "nvidia,tegra210-pcie")) { switch (lanes) { case 0x0000104: dev_info(dev, "4x1, 1x1 configuration\n"); @@ -1727,7 +1797,20 @@ static int tegra_pcie_get_regulators(struct tegra_pcie *pcie, u32 lane_mask) struct device_node *np = dev->of_node; unsigned int i = 0; - if (of_device_is_compatible(np, "nvidia,tegra210-pcie")) { + if (of_device_is_compatible(np, "nvidia,tegra186-pcie")) { + pcie->num_supplies = 4; + + pcie->supplies = devm_kcalloc(pcie->dev, pcie->num_supplies, + sizeof(*pcie->supplies), + GFP_KERNEL); + if (!pcie->supplies) + return -ENOMEM; + + pcie->supplies[i++].supply = "dvdd-pex"; + pcie->supplies[i++].supply = "hvdd-pex-pll"; + pcie->supplies[i++].supply = "hvdd-pex"; + pcie->supplies[i++].supply = "vddio-pexctl-aud"; + } else if (of_device_is_compatible(np, "nvidia,tegra210-pcie")) { pcie->num_supplies = 6; pcie->supplies = devm_kcalloc(pcie->dev, pcie->num_supplies, @@ -2066,6 +2149,7 @@ static const struct tegra_pcie_soc tegra20_pcie = { .has_cml_clk = false, .has_gen2 = false, .force_pca_enable = false, + .program_uphy = true, }; static const struct tegra_pcie_soc tegra30_pcie = { @@ -2081,6 +2165,7 @@ static const struct tegra_pcie_soc tegra30_pcie = { .has_cml_clk = true, .has_gen2 = false, .force_pca_enable = false, + .program_uphy = true, }; static const struct tegra_pcie_soc tegra124_pcie = { @@ -2095,6 +2180,7 @@ static const struct tegra_pcie_soc tegra124_pcie = { .has_cml_clk = true, .has_gen2 = true, .force_pca_enable = false, + .program_uphy = true, }; static const struct tegra_pcie_soc tegra210_pcie = { @@ -2109,9 +2195,27 @@ static const struct tegra_pcie_soc tegra210_pcie = { .has_cml_clk = true, .has_gen2 = true, .force_pca_enable = true, + .program_uphy = true, +}; + +static const struct tegra_pcie_soc tegra186_pcie = { + .num_ports = 3, + .msi_base_shift = 8, + .pads_pll_ctl = PADS_PLL_CTL_TEGRA30, + .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN, + .pads_refclk_cfg0 = 0x80b880b8, + .pads_refclk_cfg1 = 0x000480b8, + .has_pex_clkreq_en = true, + .has_pex_bias_ctrl = true, + .has_intr_prsnt_sense = true, + .has_cml_clk = false, + .has_gen2 = true, + .force_pca_enable = false, + .program_uphy = false, }; static const struct of_device_id tegra_pcie_of_match[] = { + { .compatible = "nvidia,tegra186-pcie", .data = &tegra186_pcie }, { .compatible = "nvidia,tegra210-pcie", .data = &tegra210_pcie }, { .compatible = "nvidia,tegra124-pcie", .data = &tegra124_pcie }, { .compatible = "nvidia,tegra30-pcie", .data = &tegra30_pcie }, diff --git a/drivers/pci/host/pci-v3-semi.c b/drivers/pci/host/pci-v3-semi.c new file mode 100644 index 000000000000..02f6e1e3a421 --- /dev/null +++ b/drivers/pci/host/pci-v3-semi.c @@ -0,0 +1,959 @@ +/* + * Support for V3 Semiconductor PCI Local Bus to PCI Bridge + * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> + * + * Based on the code from arch/arm/mach-integrator/pci_v3.c + * Copyright (C) 1999 ARM Limited + * Copyright (C) 2000-2001 Deep Blue Solutions Ltd + * + * Contributors to the old driver include: + * Russell King <linux@armlinux.org.uk> + * David A. Rusling <david.rusling@linaro.org> (uHAL, ARM Firmware suite) + * Rob Herring <robh@kernel.org> + * Liviu Dudau <Liviu.Dudau@arm.com> + * Grant Likely <grant.likely@secretlab.ca> + * Arnd Bergmann <arnd@arndb.de> + * Bjorn Helgaas <bhelgaas@google.com> + */ +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> +#include <linux/of_pci.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/bitops.h> +#include <linux/irq.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> +#include <linux/clk.h> + +#define V3_PCI_VENDOR 0x00000000 +#define V3_PCI_DEVICE 0x00000002 +#define V3_PCI_CMD 0x00000004 +#define V3_PCI_STAT 0x00000006 +#define V3_PCI_CC_REV 0x00000008 +#define V3_PCI_HDR_CFG 0x0000000C +#define V3_PCI_IO_BASE 0x00000010 +#define V3_PCI_BASE0 0x00000014 +#define V3_PCI_BASE1 0x00000018 +#define V3_PCI_SUB_VENDOR 0x0000002C +#define V3_PCI_SUB_ID 0x0000002E +#define V3_PCI_ROM 0x00000030 +#define V3_PCI_BPARAM 0x0000003C +#define V3_PCI_MAP0 0x00000040 +#define V3_PCI_MAP1 0x00000044 +#define V3_PCI_INT_STAT 0x00000048 +#define V3_PCI_INT_CFG 0x0000004C +#define V3_LB_BASE0 0x00000054 +#define V3_LB_BASE1 0x00000058 +#define V3_LB_MAP0 0x0000005E +#define V3_LB_MAP1 0x00000062 +#define V3_LB_BASE2 0x00000064 +#define V3_LB_MAP2 0x00000066 +#define V3_LB_SIZE 0x00000068 +#define V3_LB_IO_BASE 0x0000006E +#define V3_FIFO_CFG 0x00000070 +#define V3_FIFO_PRIORITY 0x00000072 +#define V3_FIFO_STAT 0x00000074 +#define V3_LB_ISTAT 0x00000076 +#define V3_LB_IMASK 0x00000077 +#define V3_SYSTEM 0x00000078 +#define V3_LB_CFG 0x0000007A +#define V3_PCI_CFG 0x0000007C +#define V3_DMA_PCI_ADR0 0x00000080 +#define V3_DMA_PCI_ADR1 0x00000090 +#define V3_DMA_LOCAL_ADR0 0x00000084 +#define V3_DMA_LOCAL_ADR1 0x00000094 +#define V3_DMA_LENGTH0 0x00000088 +#define V3_DMA_LENGTH1 0x00000098 +#define V3_DMA_CSR0 0x0000008B +#define V3_DMA_CSR1 0x0000009B +#define V3_DMA_CTLB_ADR0 0x0000008C +#define V3_DMA_CTLB_ADR1 0x0000009C +#define V3_DMA_DELAY 0x000000E0 +#define V3_MAIL_DATA 0x000000C0 +#define V3_PCI_MAIL_IEWR 0x000000D0 +#define V3_PCI_MAIL_IERD 0x000000D2 +#define V3_LB_MAIL_IEWR 0x000000D4 +#define V3_LB_MAIL_IERD 0x000000D6 +#define V3_MAIL_WR_STAT 0x000000D8 +#define V3_MAIL_RD_STAT 0x000000DA +#define V3_QBA_MAP 0x000000DC + +/* PCI STATUS bits */ +#define V3_PCI_STAT_PAR_ERR BIT(15) +#define V3_PCI_STAT_SYS_ERR BIT(14) +#define V3_PCI_STAT_M_ABORT_ERR BIT(13) +#define V3_PCI_STAT_T_ABORT_ERR BIT(12) + +/* LB ISTAT bits */ +#define V3_LB_ISTAT_MAILBOX BIT(7) +#define V3_LB_ISTAT_PCI_RD BIT(6) +#define V3_LB_ISTAT_PCI_WR BIT(5) +#define V3_LB_ISTAT_PCI_INT BIT(4) +#define V3_LB_ISTAT_PCI_PERR BIT(3) +#define V3_LB_ISTAT_I2O_QWR BIT(2) +#define V3_LB_ISTAT_DMA1 BIT(1) +#define V3_LB_ISTAT_DMA0 BIT(0) + +/* PCI COMMAND bits */ +#define V3_COMMAND_M_FBB_EN BIT(9) +#define V3_COMMAND_M_SERR_EN BIT(8) +#define V3_COMMAND_M_PAR_EN BIT(6) +#define V3_COMMAND_M_MASTER_EN BIT(2) +#define V3_COMMAND_M_MEM_EN BIT(1) +#define V3_COMMAND_M_IO_EN BIT(0) + +/* SYSTEM bits */ +#define V3_SYSTEM_M_RST_OUT BIT(15) +#define V3_SYSTEM_M_LOCK BIT(14) +#define V3_SYSTEM_UNLOCK 0xa05f + +/* PCI CFG bits */ +#define V3_PCI_CFG_M_I2O_EN BIT(15) +#define V3_PCI_CFG_M_IO_REG_DIS BIT(14) +#define V3_PCI_CFG_M_IO_DIS BIT(13) +#define V3_PCI_CFG_M_EN3V BIT(12) +#define V3_PCI_CFG_M_RETRY_EN BIT(10) +#define V3_PCI_CFG_M_AD_LOW1 BIT(9) +#define V3_PCI_CFG_M_AD_LOW0 BIT(8) +/* + * This is the value applied to C/BE[3:1], with bit 0 always held 0 + * during DMA access. + */ +#define V3_PCI_CFG_M_RTYPE_SHIFT 5 +#define V3_PCI_CFG_M_WTYPE_SHIFT 1 +#define V3_PCI_CFG_TYPE_DEFAULT 0x3 + +/* PCI BASE bits (PCI -> Local Bus) */ +#define V3_PCI_BASE_M_ADR_BASE 0xFFF00000U +#define V3_PCI_BASE_M_ADR_BASEL 0x000FFF00U +#define V3_PCI_BASE_M_PREFETCH BIT(3) +#define V3_PCI_BASE_M_TYPE (3 << 1) +#define V3_PCI_BASE_M_IO BIT(0) + +/* PCI MAP bits (PCI -> Local bus) */ +#define V3_PCI_MAP_M_MAP_ADR 0xFFF00000U +#define V3_PCI_MAP_M_RD_POST_INH BIT(15) +#define V3_PCI_MAP_M_ROM_SIZE (3 << 10) +#define V3_PCI_MAP_M_SWAP (3 << 8) +#define V3_PCI_MAP_M_ADR_SIZE 0x000000F0U +#define V3_PCI_MAP_M_REG_EN BIT(1) +#define V3_PCI_MAP_M_ENABLE BIT(0) + +/* LB_BASE0,1 bits (Local bus -> PCI) */ +#define V3_LB_BASE_ADR_BASE 0xfff00000U +#define V3_LB_BASE_SWAP (3 << 8) +#define V3_LB_BASE_ADR_SIZE (15 << 4) +#define V3_LB_BASE_PREFETCH BIT(3) +#define V3_LB_BASE_ENABLE BIT(0) + +#define V3_LB_BASE_ADR_SIZE_1MB (0 << 4) +#define V3_LB_BASE_ADR_SIZE_2MB (1 << 4) +#define V3_LB_BASE_ADR_SIZE_4MB (2 << 4) +#define V3_LB_BASE_ADR_SIZE_8MB (3 << 4) +#define V3_LB_BASE_ADR_SIZE_16MB (4 << 4) +#define V3_LB_BASE_ADR_SIZE_32MB (5 << 4) +#define V3_LB_BASE_ADR_SIZE_64MB (6 << 4) +#define V3_LB_BASE_ADR_SIZE_128MB (7 << 4) +#define V3_LB_BASE_ADR_SIZE_256MB (8 << 4) +#define V3_LB_BASE_ADR_SIZE_512MB (9 << 4) +#define V3_LB_BASE_ADR_SIZE_1GB (10 << 4) +#define V3_LB_BASE_ADR_SIZE_2GB (11 << 4) + +#define v3_addr_to_lb_base(a) ((a) & V3_LB_BASE_ADR_BASE) + +/* LB_MAP0,1 bits (Local bus -> PCI) */ +#define V3_LB_MAP_MAP_ADR 0xfff0U +#define V3_LB_MAP_TYPE (7 << 1) +#define V3_LB_MAP_AD_LOW_EN BIT(0) + +#define V3_LB_MAP_TYPE_IACK (0 << 1) +#define V3_LB_MAP_TYPE_IO (1 << 1) +#define V3_LB_MAP_TYPE_MEM (3 << 1) +#define V3_LB_MAP_TYPE_CONFIG (5 << 1) +#define V3_LB_MAP_TYPE_MEM_MULTIPLE (6 << 1) + +#define v3_addr_to_lb_map(a) (((a) >> 16) & V3_LB_MAP_MAP_ADR) + +/* LB_BASE2 bits (Local bus -> PCI IO) */ +#define V3_LB_BASE2_ADR_BASE 0xff00U +#define V3_LB_BASE2_SWAP_AUTO (3 << 6) +#define V3_LB_BASE2_ENABLE BIT(0) + +#define v3_addr_to_lb_base2(a) (((a) >> 16) & V3_LB_BASE2_ADR_BASE) + +/* LB_MAP2 bits (Local bus -> PCI IO) */ +#define V3_LB_MAP2_MAP_ADR 0xff00U + +#define v3_addr_to_lb_map2(a) (((a) >> 16) & V3_LB_MAP2_MAP_ADR) + +/* FIFO priority bits */ +#define V3_FIFO_PRIO_LOCAL BIT(12) +#define V3_FIFO_PRIO_LB_RD1_FLUSH_EOB BIT(10) +#define V3_FIFO_PRIO_LB_RD1_FLUSH_AP1 BIT(11) +#define V3_FIFO_PRIO_LB_RD1_FLUSH_ANY (BIT(10)|BIT(11)) +#define V3_FIFO_PRIO_LB_RD0_FLUSH_EOB BIT(8) +#define V3_FIFO_PRIO_LB_RD0_FLUSH_AP1 BIT(9) +#define V3_FIFO_PRIO_LB_RD0_FLUSH_ANY (BIT(8)|BIT(9)) +#define V3_FIFO_PRIO_PCI BIT(4) +#define V3_FIFO_PRIO_PCI_RD1_FLUSH_EOB BIT(2) +#define V3_FIFO_PRIO_PCI_RD1_FLUSH_AP1 BIT(3) +#define V3_FIFO_PRIO_PCI_RD1_FLUSH_ANY (BIT(2)|BIT(3)) +#define V3_FIFO_PRIO_PCI_RD0_FLUSH_EOB BIT(0) +#define V3_FIFO_PRIO_PCI_RD0_FLUSH_AP1 BIT(1) +#define V3_FIFO_PRIO_PCI_RD0_FLUSH_ANY (BIT(0)|BIT(1)) + +/* Local bus configuration bits */ +#define V3_LB_CFG_LB_TO_64_CYCLES 0x0000 +#define V3_LB_CFG_LB_TO_256_CYCLES BIT(13) +#define V3_LB_CFG_LB_TO_512_CYCLES BIT(14) +#define V3_LB_CFG_LB_TO_1024_CYCLES (BIT(13)|BIT(14)) +#define V3_LB_CFG_LB_RST BIT(12) +#define V3_LB_CFG_LB_PPC_RDY BIT(11) +#define V3_LB_CFG_LB_LB_INT BIT(10) +#define V3_LB_CFG_LB_ERR_EN BIT(9) +#define V3_LB_CFG_LB_RDY_EN BIT(8) +#define V3_LB_CFG_LB_BE_IMODE BIT(7) +#define V3_LB_CFG_LB_BE_OMODE BIT(6) +#define V3_LB_CFG_LB_ENDIAN BIT(5) +#define V3_LB_CFG_LB_PARK_EN BIT(4) +#define V3_LB_CFG_LB_FBB_DIS BIT(2) + +/* ARM Integrator-specific extended control registers */ +#define INTEGRATOR_SC_PCI_OFFSET 0x18 +#define INTEGRATOR_SC_PCI_ENABLE BIT(0) +#define INTEGRATOR_SC_PCI_INTCLR BIT(1) +#define INTEGRATOR_SC_LBFADDR_OFFSET 0x20 +#define INTEGRATOR_SC_LBFCODE_OFFSET 0x24 + +struct v3_pci { + struct device *dev; + void __iomem *base; + void __iomem *config_base; + struct pci_bus *bus; + u32 config_mem; + u32 io_mem; + u32 non_pre_mem; + u32 pre_mem; + phys_addr_t io_bus_addr; + phys_addr_t non_pre_bus_addr; + phys_addr_t pre_bus_addr; + struct regmap *map; +}; + +/* + * The V3 PCI interface chip in Integrator provides several windows from + * local bus memory into the PCI memory areas. Unfortunately, there + * are not really enough windows for our usage, therefore we reuse + * one of the windows for access to PCI configuration space. On the + * Integrator/AP, the memory map is as follows: + * + * Local Bus Memory Usage + * + * 40000000 - 4FFFFFFF PCI memory. 256M non-prefetchable + * 50000000 - 5FFFFFFF PCI memory. 256M prefetchable + * 60000000 - 60FFFFFF PCI IO. 16M + * 61000000 - 61FFFFFF PCI Configuration. 16M + * + * There are three V3 windows, each described by a pair of V3 registers. + * These are LB_BASE0/LB_MAP0, LB_BASE1/LB_MAP1 and LB_BASE2/LB_MAP2. + * Base0 and Base1 can be used for any type of PCI memory access. Base2 + * can be used either for PCI I/O or for I20 accesses. By default, uHAL + * uses this only for PCI IO space. + * + * Normally these spaces are mapped using the following base registers: + * + * Usage Local Bus Memory Base/Map registers used + * + * Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0 + * Mem 50000000 - 5FFFFFFF LB_BASE1/LB_MAP1 + * IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2 + * Cfg 61000000 - 61FFFFFF + * + * This means that I20 and PCI configuration space accesses will fail. + * When PCI configuration accesses are needed (via the uHAL PCI + * configuration space primitives) we must remap the spaces as follows: + * + * Usage Local Bus Memory Base/Map registers used + * + * Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0 + * Mem 50000000 - 5FFFFFFF LB_BASE0/LB_MAP0 + * IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2 + * Cfg 61000000 - 61FFFFFF LB_BASE1/LB_MAP1 + * + * To make this work, the code depends on overlapping windows working. + * The V3 chip translates an address by checking its range within + * each of the BASE/MAP pairs in turn (in ascending register number + * order). It will use the first matching pair. So, for example, + * if the same address is mapped by both LB_BASE0/LB_MAP0 and + * LB_BASE1/LB_MAP1, the V3 will use the translation from + * LB_BASE0/LB_MAP0. + * + * To allow PCI Configuration space access, the code enlarges the + * window mapped by LB_BASE0/LB_MAP0 from 256M to 512M. This occludes + * the windows currently mapped by LB_BASE1/LB_MAP1 so that it can + * be remapped for use by configuration cycles. + * + * At the end of the PCI Configuration space accesses, + * LB_BASE1/LB_MAP1 is reset to map PCI Memory. Finally the window + * mapped by LB_BASE0/LB_MAP0 is reduced in size from 512M to 256M to + * reveal the now restored LB_BASE1/LB_MAP1 window. + * + * NOTE: We do not set up I2O mapping. I suspect that this is only + * for an intelligent (target) device. Using I2O disables most of + * the mappings into PCI memory. + */ +static void __iomem *v3_map_bus(struct pci_bus *bus, + unsigned int devfn, int offset) +{ + struct v3_pci *v3 = bus->sysdata; + unsigned int address, mapaddress, busnr; + + busnr = bus->number; + if (busnr == 0) { + int slot = PCI_SLOT(devfn); + + /* + * local bus segment so need a type 0 config cycle + * + * build the PCI configuration "address" with one-hot in + * A31-A11 + * + * mapaddress: + * 3:1 = config cycle (101) + * 0 = PCI A1 & A0 are 0 (0) + */ + address = PCI_FUNC(devfn) << 8; + mapaddress = V3_LB_MAP_TYPE_CONFIG; + + if (slot > 12) + /* + * high order bits are handled by the MAP register + */ + mapaddress |= BIT(slot - 5); + else + /* + * low order bits handled directly in the address + */ + address |= BIT(slot + 11); + } else { + /* + * not the local bus segment so need a type 1 config cycle + * + * address: + * 23:16 = bus number + * 15:11 = slot number (7:3 of devfn) + * 10:8 = func number (2:0 of devfn) + * + * mapaddress: + * 3:1 = config cycle (101) + * 0 = PCI A1 & A0 from host bus (1) + */ + mapaddress = V3_LB_MAP_TYPE_CONFIG | V3_LB_MAP_AD_LOW_EN; + address = (busnr << 16) | (devfn << 8); + } + + /* + * Set up base0 to see all 512Mbytes of memory space (not + * prefetchable), this frees up base1 for re-use by + * configuration memory + */ + writel(v3_addr_to_lb_base(v3->non_pre_mem) | + V3_LB_BASE_ADR_SIZE_512MB | V3_LB_BASE_ENABLE, + v3->base + V3_LB_BASE0); + + /* + * Set up base1/map1 to point into configuration space. + * The config mem is always 16MB. + */ + writel(v3_addr_to_lb_base(v3->config_mem) | + V3_LB_BASE_ADR_SIZE_16MB | V3_LB_BASE_ENABLE, + v3->base + V3_LB_BASE1); + writew(mapaddress, v3->base + V3_LB_MAP1); + + return v3->config_base + address + offset; +} + +static void v3_unmap_bus(struct v3_pci *v3) +{ + /* + * Reassign base1 for use by prefetchable PCI memory + */ + writel(v3_addr_to_lb_base(v3->pre_mem) | + V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_PREFETCH | + V3_LB_BASE_ENABLE, + v3->base + V3_LB_BASE1); + writew(v3_addr_to_lb_map(v3->pre_bus_addr) | + V3_LB_MAP_TYPE_MEM, /* was V3_LB_MAP_TYPE_MEM_MULTIPLE */ + v3->base + V3_LB_MAP1); + + /* + * And shrink base0 back to a 256M window (NOTE: MAP0 already correct) + */ + writel(v3_addr_to_lb_base(v3->non_pre_mem) | + V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE, + v3->base + V3_LB_BASE0); +} + +static int v3_pci_read_config(struct pci_bus *bus, unsigned int fn, + int config, int size, u32 *value) +{ + struct v3_pci *v3 = bus->sysdata; + int ret; + + dev_dbg(&bus->dev, + "[read] slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n", + PCI_SLOT(fn), PCI_FUNC(fn), config, size, *value); + ret = pci_generic_config_read(bus, fn, config, size, value); + v3_unmap_bus(v3); + return ret; +} + +static int v3_pci_write_config(struct pci_bus *bus, unsigned int fn, + int config, int size, u32 value) +{ + struct v3_pci *v3 = bus->sysdata; + int ret; + + dev_dbg(&bus->dev, + "[write] slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n", + PCI_SLOT(fn), PCI_FUNC(fn), config, size, value); + ret = pci_generic_config_write(bus, fn, config, size, value); + v3_unmap_bus(v3); + return ret; +} + +static struct pci_ops v3_pci_ops = { + .map_bus = v3_map_bus, + .read = v3_pci_read_config, + .write = v3_pci_write_config, +}; + +static irqreturn_t v3_irq(int irq, void *data) +{ + struct v3_pci *v3 = data; + struct device *dev = v3->dev; + u32 status; + + status = readw(v3->base + V3_PCI_STAT); + if (status & V3_PCI_STAT_PAR_ERR) + dev_err(dev, "parity error interrupt\n"); + if (status & V3_PCI_STAT_SYS_ERR) + dev_err(dev, "system error interrupt\n"); + if (status & V3_PCI_STAT_M_ABORT_ERR) + dev_err(dev, "master abort error interrupt\n"); + if (status & V3_PCI_STAT_T_ABORT_ERR) + dev_err(dev, "target abort error interrupt\n"); + writew(status, v3->base + V3_PCI_STAT); + + status = readb(v3->base + V3_LB_ISTAT); + if (status & V3_LB_ISTAT_MAILBOX) + dev_info(dev, "PCI mailbox interrupt\n"); + if (status & V3_LB_ISTAT_PCI_RD) + dev_err(dev, "PCI target LB->PCI READ abort interrupt\n"); + if (status & V3_LB_ISTAT_PCI_WR) + dev_err(dev, "PCI target LB->PCI WRITE abort interrupt\n"); + if (status & V3_LB_ISTAT_PCI_INT) + dev_info(dev, "PCI pin interrupt\n"); + if (status & V3_LB_ISTAT_PCI_PERR) + dev_err(dev, "PCI parity error interrupt\n"); + if (status & V3_LB_ISTAT_I2O_QWR) + dev_info(dev, "I2O inbound post queue interrupt\n"); + if (status & V3_LB_ISTAT_DMA1) + dev_info(dev, "DMA channel 1 interrupt\n"); + if (status & V3_LB_ISTAT_DMA0) + dev_info(dev, "DMA channel 0 interrupt\n"); + /* Clear all possible interrupts on the local bus */ + writeb(0, v3->base + V3_LB_ISTAT); + if (v3->map) + regmap_write(v3->map, INTEGRATOR_SC_PCI_OFFSET, + INTEGRATOR_SC_PCI_ENABLE | + INTEGRATOR_SC_PCI_INTCLR); + + return IRQ_HANDLED; +} + +static int v3_integrator_init(struct v3_pci *v3) +{ + unsigned int val; + + v3->map = + syscon_regmap_lookup_by_compatible("arm,integrator-ap-syscon"); + if (IS_ERR(v3->map)) { + dev_err(v3->dev, "no syscon\n"); + return -ENODEV; + } + + regmap_read(v3->map, INTEGRATOR_SC_PCI_OFFSET, &val); + /* Take the PCI bridge out of reset, clear IRQs */ + regmap_write(v3->map, INTEGRATOR_SC_PCI_OFFSET, + INTEGRATOR_SC_PCI_ENABLE | + INTEGRATOR_SC_PCI_INTCLR); + + if (!(val & INTEGRATOR_SC_PCI_ENABLE)) { + /* If we were in reset we need to sleep a bit */ + msleep(230); + + /* Set the physical base for the controller itself */ + writel(0x6200, v3->base + V3_LB_IO_BASE); + + /* Wait for the mailbox to settle after reset */ + do { + writeb(0xaa, v3->base + V3_MAIL_DATA); + writeb(0x55, v3->base + V3_MAIL_DATA + 4); + } while (readb(v3->base + V3_MAIL_DATA) != 0xaa && + readb(v3->base + V3_MAIL_DATA) != 0x55); + } + + dev_info(v3->dev, "initialized PCI V3 Integrator/AP integration\n"); + + return 0; +} + +static int v3_pci_setup_resource(struct v3_pci *v3, + resource_size_t io_base, + struct pci_host_bridge *host, + struct resource_entry *win) +{ + struct device *dev = v3->dev; + struct resource *mem; + struct resource *io; + int ret; + + switch (resource_type(win->res)) { + case IORESOURCE_IO: + io = win->res; + io->name = "V3 PCI I/O"; + v3->io_mem = io_base; + v3->io_bus_addr = io->start - win->offset; + dev_dbg(dev, "I/O window %pR, bus addr %pap\n", + io, &v3->io_bus_addr); + ret = pci_remap_iospace(io, io_base); + if (ret) { + dev_warn(dev, + "error %d: failed to map resource %pR\n", + ret, io); + return ret; + } + /* Setup window 2 - PCI I/O */ + writel(v3_addr_to_lb_base2(v3->io_mem) | + V3_LB_BASE2_ENABLE, + v3->base + V3_LB_BASE2); + writew(v3_addr_to_lb_map2(v3->io_bus_addr), + v3->base + V3_LB_MAP2); + break; + case IORESOURCE_MEM: + mem = win->res; + if (mem->flags & IORESOURCE_PREFETCH) { + mem->name = "V3 PCI PRE-MEM"; + v3->pre_mem = mem->start; + v3->pre_bus_addr = mem->start - win->offset; + dev_dbg(dev, "PREFETCHABLE MEM window %pR, bus addr %pap\n", + mem, &v3->pre_bus_addr); + if (resource_size(mem) != SZ_256M) { + dev_err(dev, "prefetchable memory range is not 256MB\n"); + return -EINVAL; + } + if (v3->non_pre_mem && + (mem->start != v3->non_pre_mem + SZ_256M)) { + dev_err(dev, + "prefetchable memory is not adjacent to non-prefetchable memory\n"); + return -EINVAL; + } + /* Setup window 1 - PCI prefetchable memory */ + writel(v3_addr_to_lb_base(v3->pre_mem) | + V3_LB_BASE_ADR_SIZE_256MB | + V3_LB_BASE_PREFETCH | + V3_LB_BASE_ENABLE, + v3->base + V3_LB_BASE1); + writew(v3_addr_to_lb_map(v3->pre_bus_addr) | + V3_LB_MAP_TYPE_MEM, /* Was V3_LB_MAP_TYPE_MEM_MULTIPLE */ + v3->base + V3_LB_MAP1); + } else { + mem->name = "V3 PCI NON-PRE-MEM"; + v3->non_pre_mem = mem->start; + v3->non_pre_bus_addr = mem->start - win->offset; + dev_dbg(dev, "NON-PREFETCHABLE MEM window %pR, bus addr %pap\n", + mem, &v3->non_pre_bus_addr); + if (resource_size(mem) != SZ_256M) { + dev_err(dev, + "non-prefetchable memory range is not 256MB\n"); + return -EINVAL; + } + /* Setup window 0 - PCI non-prefetchable memory */ + writel(v3_addr_to_lb_base(v3->non_pre_mem) | + V3_LB_BASE_ADR_SIZE_256MB | + V3_LB_BASE_ENABLE, + v3->base + V3_LB_BASE0); + writew(v3_addr_to_lb_map(v3->non_pre_bus_addr) | + V3_LB_MAP_TYPE_MEM, + v3->base + V3_LB_MAP0); + } + break; + case IORESOURCE_BUS: + dev_dbg(dev, "BUS %pR\n", win->res); + host->busnr = win->res->start; + break; + default: + dev_info(dev, "Unknown resource type %lu\n", + resource_type(win->res)); + break; + } + + return 0; +} + +static int v3_get_dma_range_config(struct v3_pci *v3, + struct of_pci_range *range, + u32 *pci_base, u32 *pci_map) +{ + struct device *dev = v3->dev; + u64 cpu_end = range->cpu_addr + range->size - 1; + u64 pci_end = range->pci_addr + range->size - 1; + u32 val; + + if (range->pci_addr & ~V3_PCI_BASE_M_ADR_BASE) { + dev_err(dev, "illegal range, only PCI bits 31..20 allowed\n"); + return -EINVAL; + } + val = ((u32)range->pci_addr) & V3_PCI_BASE_M_ADR_BASE; + *pci_base = val; + + if (range->cpu_addr & ~V3_PCI_MAP_M_MAP_ADR) { + dev_err(dev, "illegal range, only CPU bits 31..20 allowed\n"); + return -EINVAL; + } + val = ((u32)range->cpu_addr) & V3_PCI_MAP_M_MAP_ADR; + + switch (range->size) { + case SZ_1M: + val |= V3_LB_BASE_ADR_SIZE_1MB; + break; + case SZ_2M: + val |= V3_LB_BASE_ADR_SIZE_2MB; + break; + case SZ_4M: + val |= V3_LB_BASE_ADR_SIZE_4MB; + break; + case SZ_8M: + val |= V3_LB_BASE_ADR_SIZE_8MB; + break; + case SZ_16M: + val |= V3_LB_BASE_ADR_SIZE_16MB; + break; + case SZ_32M: + val |= V3_LB_BASE_ADR_SIZE_32MB; + break; + case SZ_64M: + val |= V3_LB_BASE_ADR_SIZE_64MB; + break; + case SZ_128M: + val |= V3_LB_BASE_ADR_SIZE_128MB; + break; + case SZ_256M: + val |= V3_LB_BASE_ADR_SIZE_256MB; + break; + case SZ_512M: + val |= V3_LB_BASE_ADR_SIZE_512MB; + break; + case SZ_1G: + val |= V3_LB_BASE_ADR_SIZE_1GB; + break; + case SZ_2G: + val |= V3_LB_BASE_ADR_SIZE_2GB; + break; + default: + dev_err(v3->dev, "illegal dma memory chunk size\n"); + return -EINVAL; + break; + }; + val |= V3_PCI_MAP_M_REG_EN | V3_PCI_MAP_M_ENABLE; + *pci_map = val; + + dev_dbg(dev, + "DMA MEM CPU: 0x%016llx -> 0x%016llx => " + "PCI: 0x%016llx -> 0x%016llx base %08x map %08x\n", + range->cpu_addr, cpu_end, + range->pci_addr, pci_end, + *pci_base, *pci_map); + + return 0; +} + +static int v3_pci_parse_map_dma_ranges(struct v3_pci *v3, + struct device_node *np) +{ + struct of_pci_range range; + struct of_pci_range_parser parser; + struct device *dev = v3->dev; + int i = 0; + + if (of_pci_dma_range_parser_init(&parser, np)) { + dev_err(dev, "missing dma-ranges property\n"); + return -EINVAL; + } + + /* + * Get the dma-ranges from the device tree + */ + for_each_of_pci_range(&parser, &range) { + int ret; + u32 pci_base, pci_map; + + ret = v3_get_dma_range_config(v3, &range, &pci_base, &pci_map); + if (ret) + return ret; + + if (i == 0) { + writel(pci_base, v3->base + V3_PCI_BASE0); + writel(pci_map, v3->base + V3_PCI_MAP0); + } else if (i == 1) { + writel(pci_base, v3->base + V3_PCI_BASE1); + writel(pci_map, v3->base + V3_PCI_MAP1); + } else { + dev_err(dev, "too many ranges, only two supported\n"); + dev_err(dev, "range %d ignored\n", i); + } + i++; + } + return 0; +} + +static int v3_pci_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + resource_size_t io_base; + struct resource *regs; + struct resource_entry *win; + struct v3_pci *v3; + struct pci_host_bridge *host; + struct clk *clk; + u16 val; + int irq; + int ret; + LIST_HEAD(res); + + host = pci_alloc_host_bridge(sizeof(*v3)); + if (!host) + return -ENOMEM; + + host->dev.parent = dev; + host->ops = &v3_pci_ops; + host->busnr = 0; + host->msi = NULL; + host->map_irq = of_irq_parse_and_map_pci; + host->swizzle_irq = pci_common_swizzle; + v3 = pci_host_bridge_priv(host); + host->sysdata = v3; + v3->dev = dev; + + /* Get and enable host clock */ + clk = devm_clk_get(dev, NULL); + if (IS_ERR(clk)) { + dev_err(dev, "clock not found\n"); + return PTR_ERR(clk); + } + ret = clk_prepare_enable(clk); + if (ret) { + dev_err(dev, "unable to enable clock\n"); + return ret; + } + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + v3->base = devm_ioremap_resource(dev, regs); + if (IS_ERR(v3->base)) + return PTR_ERR(v3->base); + /* + * The hardware has a register with the physical base address + * of the V3 controller itself, verify that this is the same + * as the physical memory we've remapped it from. + */ + if (readl(v3->base + V3_LB_IO_BASE) != (regs->start >> 16)) + dev_err(dev, "V3_LB_IO_BASE = %08x but device is @%pR\n", + readl(v3->base + V3_LB_IO_BASE), regs); + + /* Configuration space is 16MB directly mapped */ + regs = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (resource_size(regs) != SZ_16M) { + dev_err(dev, "config mem is not 16MB!\n"); + return -EINVAL; + } + v3->config_mem = regs->start; + v3->config_base = devm_ioremap_resource(dev, regs); + if (IS_ERR(v3->config_base)) + return PTR_ERR(v3->config_base); + + ret = of_pci_get_host_bridge_resources(np, 0, 0xff, &res, &io_base); + if (ret) + return ret; + + ret = devm_request_pci_bus_resources(dev, &res); + if (ret) + return ret; + + /* Get and request error IRQ resource */ + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_err(dev, "unable to obtain PCIv3 error IRQ\n"); + return -ENODEV; + } + ret = devm_request_irq(dev, irq, v3_irq, 0, + "PCIv3 error", v3); + if (ret < 0) { + dev_err(dev, + "unable to request PCIv3 error IRQ %d (%d)\n", + irq, ret); + return ret; + } + + /* + * Unlock V3 registers, but only if they were previously locked. + */ + if (readw(v3->base + V3_SYSTEM) & V3_SYSTEM_M_LOCK) + writew(V3_SYSTEM_UNLOCK, v3->base + V3_SYSTEM); + + /* Disable all slave access while we set up the windows */ + val = readw(v3->base + V3_PCI_CMD); + val &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + writew(val, v3->base + V3_PCI_CMD); + + /* Put the PCI bus into reset */ + val = readw(v3->base + V3_SYSTEM); + val &= ~V3_SYSTEM_M_RST_OUT; + writew(val, v3->base + V3_SYSTEM); + + /* Retry until we're ready */ + val = readw(v3->base + V3_PCI_CFG); + val |= V3_PCI_CFG_M_RETRY_EN; + writew(val, v3->base + V3_PCI_CFG); + + /* Set up the local bus protocol */ + val = readw(v3->base + V3_LB_CFG); + val |= V3_LB_CFG_LB_BE_IMODE; /* Byte enable input */ + val |= V3_LB_CFG_LB_BE_OMODE; /* Byte enable output */ + val &= ~V3_LB_CFG_LB_ENDIAN; /* Little endian */ + val &= ~V3_LB_CFG_LB_PPC_RDY; /* TODO: when using on PPC403Gx, set to 1 */ + writew(val, v3->base + V3_LB_CFG); + + /* Enable the PCI bus master */ + val = readw(v3->base + V3_PCI_CMD); + val |= PCI_COMMAND_MASTER; + writew(val, v3->base + V3_PCI_CMD); + + /* Get the I/O and memory ranges from DT */ + resource_list_for_each_entry(win, &res) { + ret = v3_pci_setup_resource(v3, io_base, host, win); + if (ret) { + dev_err(dev, "error setting up resources\n"); + return ret; + } + } + ret = v3_pci_parse_map_dma_ranges(v3, np); + if (ret) + return ret; + + /* + * Disable PCI to host IO cycles, enable I/O buffers @3.3V, + * set AD_LOW0 to 1 if one of the LB_MAP registers choose + * to use this (should be unused). + */ + writel(0x00000000, v3->base + V3_PCI_IO_BASE); + val = V3_PCI_CFG_M_IO_REG_DIS | V3_PCI_CFG_M_IO_DIS | + V3_PCI_CFG_M_EN3V | V3_PCI_CFG_M_AD_LOW0; + /* + * DMA read and write from PCI bus commands types + */ + val |= V3_PCI_CFG_TYPE_DEFAULT << V3_PCI_CFG_M_RTYPE_SHIFT; + val |= V3_PCI_CFG_TYPE_DEFAULT << V3_PCI_CFG_M_WTYPE_SHIFT; + writew(val, v3->base + V3_PCI_CFG); + + /* + * Set the V3 FIFO such that writes have higher priority than + * reads, and local bus write causes local bus read fifo flush + * on aperture 1. Same for PCI. + */ + writew(V3_FIFO_PRIO_LB_RD1_FLUSH_AP1 | + V3_FIFO_PRIO_LB_RD0_FLUSH_AP1 | + V3_FIFO_PRIO_PCI_RD1_FLUSH_AP1 | + V3_FIFO_PRIO_PCI_RD0_FLUSH_AP1, + v3->base + V3_FIFO_PRIORITY); + + + /* + * Clear any error interrupts, and enable parity and write error + * interrupts + */ + writeb(0, v3->base + V3_LB_ISTAT); + val = readw(v3->base + V3_LB_CFG); + val |= V3_LB_CFG_LB_LB_INT; + writew(val, v3->base + V3_LB_CFG); + writeb(V3_LB_ISTAT_PCI_WR | V3_LB_ISTAT_PCI_PERR, + v3->base + V3_LB_IMASK); + + /* Special Integrator initialization */ + if (of_device_is_compatible(np, "arm,integrator-ap-pci")) { + ret = v3_integrator_init(v3); + if (ret) + return ret; + } + + /* Post-init: enable PCI memory and invalidate (master already on) */ + val = readw(v3->base + V3_PCI_CMD); + val |= PCI_COMMAND_MEMORY | PCI_COMMAND_INVALIDATE; + writew(val, v3->base + V3_PCI_CMD); + + /* Clear pending interrupts */ + writeb(0, v3->base + V3_LB_ISTAT); + /* Read or write errors and parity errors cause interrupts */ + writeb(V3_LB_ISTAT_PCI_RD | V3_LB_ISTAT_PCI_WR | V3_LB_ISTAT_PCI_PERR, + v3->base + V3_LB_IMASK); + + /* Take the PCI bus out of reset so devices can initialize */ + val = readw(v3->base + V3_SYSTEM); + val |= V3_SYSTEM_M_RST_OUT; + writew(val, v3->base + V3_SYSTEM); + + /* + * Re-lock the system register. + */ + val = readw(v3->base + V3_SYSTEM); + val |= V3_SYSTEM_M_LOCK; + writew(val, v3->base + V3_SYSTEM); + + list_splice_init(&res, &host->windows); + ret = pci_scan_root_bus_bridge(host); + if (ret) { + dev_err(dev, "failed to register host: %d\n", ret); + return ret; + } + v3->bus = host->bus; + + pci_bus_assign_resources(v3->bus); + pci_bus_add_devices(v3->bus); + + return 0; +} + +static const struct of_device_id v3_pci_of_match[] = { + { + .compatible = "v3,v360epc-pci", + }, + {}, +}; + +static struct platform_driver v3_pci_driver = { + .driver = { + .name = "pci-v3-semi", + .of_match_table = of_match_ptr(v3_pci_of_match), + .suppress_bind_attrs = true, + }, + .probe = v3_pci_probe, +}; +builtin_platform_driver(v3_pci_driver); diff --git a/drivers/pci/host/pci-xgene.c b/drivers/pci/host/pci-xgene.c index 087645116ecb..465aa2a1b38d 100644 --- a/drivers/pci/host/pci-xgene.c +++ b/drivers/pci/host/pci-xgene.c @@ -542,24 +542,6 @@ static void xgene_pcie_setup_ib_reg(struct xgene_pcie_port *port, xgene_pcie_setup_pims(port, pim_reg, pci_addr, ~(size - 1)); } -static int pci_dma_range_parser_init(struct of_pci_range_parser *parser, - struct device_node *node) -{ - const int na = 3, ns = 2; - int rlen; - - parser->node = node; - parser->pna = of_n_addr_cells(node); - parser->np = parser->pna + na + ns; - - parser->range = of_get_property(node, "dma-ranges", &rlen); - if (!parser->range) - return -ENOENT; - parser->end = parser->range + rlen / sizeof(__be32); - - return 0; -} - static int xgene_pcie_parse_map_dma_ranges(struct xgene_pcie_port *port) { struct device_node *np = port->node; @@ -568,7 +550,7 @@ static int xgene_pcie_parse_map_dma_ranges(struct xgene_pcie_port *port) struct device *dev = port->dev; u8 ib_reg_mask = 0; - if (pci_dma_range_parser_init(&parser, np)) { + if (of_pci_dma_range_parser_init(&parser, np)) { dev_err(dev, "missing dma-ranges property\n"); return -EINVAL; } @@ -628,7 +610,7 @@ static struct pci_ops xgene_pcie_ops = { .write = pci_generic_config_write32, }; -static int xgene_pcie_probe_bridge(struct platform_device *pdev) +static int xgene_pcie_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *dn = dev->of_node; @@ -709,7 +691,7 @@ static struct platform_driver xgene_pcie_driver = { .of_match_table = of_match_ptr(xgene_pcie_match_table), .suppress_bind_attrs = true, }, - .probe = xgene_pcie_probe_bridge, + .probe = xgene_pcie_probe, }; builtin_platform_driver(xgene_pcie_driver); #endif diff --git a/drivers/pci/host/pcie-altera.c b/drivers/pci/host/pcie-altera.c index b468b8cccf8d..5cc4f594d79a 100644 --- a/drivers/pci/host/pcie-altera.c +++ b/drivers/pci/host/pcie-altera.c @@ -105,7 +105,7 @@ static inline u32 cra_readl(struct altera_pcie *pcie, const u32 reg) return readl_relaxed(pcie->cra_base + reg); } -static bool altera_pcie_link_is_up(struct altera_pcie *pcie) +static bool altera_pcie_link_up(struct altera_pcie *pcie) { return !!((cra_readl(pcie, RP_LTSSM) & RP_LTSSM_MASK) == LTSSM_L0); } @@ -142,7 +142,7 @@ static bool altera_pcie_valid_device(struct altera_pcie *pcie, { /* If there is no link, then there is no device */ if (bus->number != pcie->root_bus_nr) { - if (!altera_pcie_link_is_up(pcie)) + if (!altera_pcie_link_up(pcie)) return false; } @@ -412,7 +412,7 @@ static void altera_wait_link_retrain(struct altera_pcie *pcie) /* Wait for link is up */ start_jiffies = jiffies; for (;;) { - if (altera_pcie_link_is_up(pcie)) + if (altera_pcie_link_up(pcie)) break; if (time_after(jiffies, start_jiffies + LINK_UP_TIMEOUT)) { @@ -427,7 +427,7 @@ static void altera_pcie_retrain(struct altera_pcie *pcie) { u16 linkcap, linkstat, linkctl; - if (!altera_pcie_link_is_up(pcie)) + if (!altera_pcie_link_up(pcie)) return; /* diff --git a/drivers/pci/host/pcie-iproc-msi.c b/drivers/pci/host/pcie-iproc-msi.c index 2d0f535a2f69..990fc906d73d 100644 --- a/drivers/pci/host/pcie-iproc-msi.c +++ b/drivers/pci/host/pcie-iproc-msi.c @@ -179,7 +179,7 @@ static struct irq_chip iproc_msi_irq_chip = { static struct msi_domain_info iproc_msi_domain_info = { .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | - MSI_FLAG_PCI_MSIX, + MSI_FLAG_MULTI_PCI_MSI | MSI_FLAG_PCI_MSIX, .chip = &iproc_msi_irq_chip, }; @@ -237,7 +237,7 @@ static void iproc_msi_irq_compose_msi_msg(struct irq_data *data, addr = msi->msi_addr + iproc_msi_addr_offset(msi, data->hwirq); msg->address_lo = lower_32_bits(addr); msg->address_hi = upper_32_bits(addr); - msg->data = data->hwirq; + msg->data = data->hwirq << 5; } static struct irq_chip iproc_msi_bottom_irq_chip = { @@ -251,7 +251,7 @@ static int iproc_msi_irq_domain_alloc(struct irq_domain *domain, void *args) { struct iproc_msi *msi = domain->host_data; - int hwirq; + int hwirq, i; mutex_lock(&msi->bitmap_lock); @@ -267,10 +267,14 @@ static int iproc_msi_irq_domain_alloc(struct irq_domain *domain, mutex_unlock(&msi->bitmap_lock); - irq_domain_set_info(domain, virq, hwirq, &iproc_msi_bottom_irq_chip, - domain->host_data, handle_simple_irq, NULL, NULL); + for (i = 0; i < nr_irqs; i++) { + irq_domain_set_info(domain, virq + i, hwirq + i, + &iproc_msi_bottom_irq_chip, + domain->host_data, handle_simple_irq, + NULL, NULL); + } - return 0; + return hwirq; } static void iproc_msi_irq_domain_free(struct irq_domain *domain, @@ -302,7 +306,8 @@ static inline u32 decode_msi_hwirq(struct iproc_msi *msi, u32 eq, u32 head) offs = iproc_msi_eq_offset(msi, eq) + head * sizeof(u32); msg = (u32 *)(msi->eq_cpu + offs); - hwirq = *msg & IPROC_MSI_EQ_MASK; + hwirq = readl(msg); + hwirq = (hwirq >> 5) + (hwirq & 0x1f); /* * Since we have multiple hwirq mapped to a single MSI vector, diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c index 3a8b9d20ee57..935909bbe5c4 100644 --- a/drivers/pci/host/pcie-iproc.c +++ b/drivers/pci/host/pcie-iproc.c @@ -1097,24 +1097,6 @@ err_ib: return ret; } -static int pci_dma_range_parser_init(struct of_pci_range_parser *parser, - struct device_node *node) -{ - const int na = 3, ns = 2; - int rlen; - - parser->node = node; - parser->pna = of_n_addr_cells(node); - parser->np = parser->pna + na + ns; - - parser->range = of_get_property(node, "dma-ranges", &rlen); - if (!parser->range) - return -ENOENT; - - parser->end = parser->range + rlen / sizeof(__be32); - return 0; -} - static int iproc_pcie_map_dma_ranges(struct iproc_pcie *pcie) { struct of_pci_range range; @@ -1122,7 +1104,7 @@ static int iproc_pcie_map_dma_ranges(struct iproc_pcie *pcie) int ret; /* Get the dma-ranges from DT */ - ret = pci_dma_range_parser_init(&parser, pcie->dev->of_node); + ret = of_pci_dma_range_parser_init(&parser, pcie->dev->of_node); if (ret) return ret; diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c index 4e0b25d09b0c..12796eccb2be 100644 --- a/drivers/pci/host/pcie-rcar.c +++ b/drivers/pci/host/pcie-rcar.c @@ -1027,24 +1027,6 @@ static int rcar_pcie_inbound_ranges(struct rcar_pcie *pcie, return 0; } -static int pci_dma_range_parser_init(struct of_pci_range_parser *parser, - struct device_node *node) -{ - const int na = 3, ns = 2; - int rlen; - - parser->node = node; - parser->pna = of_n_addr_cells(node); - parser->np = parser->pna + na + ns; - - parser->range = of_get_property(node, "dma-ranges", &rlen); - if (!parser->range) - return -ENOENT; - - parser->end = parser->range + rlen / sizeof(__be32); - return 0; -} - static int rcar_pcie_parse_map_dma_ranges(struct rcar_pcie *pcie, struct device_node *np) { @@ -1053,7 +1035,7 @@ static int rcar_pcie_parse_map_dma_ranges(struct rcar_pcie *pcie, int index = 0; int err; - if (pci_dma_range_parser_init(&parser, np)) + if (of_pci_dma_range_parser_init(&parser, np)) return -EINVAL; /* Get the dma-ranges from DT */ diff --git a/drivers/pci/host/pcie-tango.c b/drivers/pci/host/pcie-tango.c index 95049de4131c..21a208da3f59 100644 --- a/drivers/pci/host/pcie-tango.c +++ b/drivers/pci/host/pcie-tango.c @@ -1,13 +1,173 @@ // SPDX-License-Identifier: GPL-2.0 +#include <linux/irqchip/chained_irq.h> +#include <linux/irqdomain.h> #include <linux/pci-ecam.h> #include <linux/delay.h> -#include <linux/of.h> +#include <linux/msi.h> +#include <linux/of_address.h> + +#define MSI_MAX 256 #define SMP8759_MUX 0x48 #define SMP8759_TEST_OUT 0x74 +#define SMP8759_DOORBELL 0x7c +#define SMP8759_STATUS 0x80 +#define SMP8759_ENABLE 0xa0 struct tango_pcie { - void __iomem *base; + DECLARE_BITMAP(used_msi, MSI_MAX); + u64 msi_doorbell; + spinlock_t used_msi_lock; + void __iomem *base; + struct irq_domain *dom; +}; + +static void tango_msi_isr(struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + struct tango_pcie *pcie = irq_desc_get_handler_data(desc); + unsigned long status, base, virq, idx, pos = 0; + + chained_irq_enter(chip, desc); + spin_lock(&pcie->used_msi_lock); + + while ((pos = find_next_bit(pcie->used_msi, MSI_MAX, pos)) < MSI_MAX) { + base = round_down(pos, 32); + status = readl_relaxed(pcie->base + SMP8759_STATUS + base / 8); + for_each_set_bit(idx, &status, 32) { + virq = irq_find_mapping(pcie->dom, base + idx); + generic_handle_irq(virq); + } + pos = base + 32; + } + + spin_unlock(&pcie->used_msi_lock); + chained_irq_exit(chip, desc); +} + +static void tango_ack(struct irq_data *d) +{ + struct tango_pcie *pcie = d->chip_data; + u32 offset = (d->hwirq / 32) * 4; + u32 bit = BIT(d->hwirq % 32); + + writel_relaxed(bit, pcie->base + SMP8759_STATUS + offset); +} + +static void update_msi_enable(struct irq_data *d, bool unmask) +{ + unsigned long flags; + struct tango_pcie *pcie = d->chip_data; + u32 offset = (d->hwirq / 32) * 4; + u32 bit = BIT(d->hwirq % 32); + u32 val; + + spin_lock_irqsave(&pcie->used_msi_lock, flags); + val = readl_relaxed(pcie->base + SMP8759_ENABLE + offset); + val = unmask ? val | bit : val & ~bit; + writel_relaxed(val, pcie->base + SMP8759_ENABLE + offset); + spin_unlock_irqrestore(&pcie->used_msi_lock, flags); +} + +static void tango_mask(struct irq_data *d) +{ + update_msi_enable(d, false); +} + +static void tango_unmask(struct irq_data *d) +{ + update_msi_enable(d, true); +} + +static int tango_set_affinity(struct irq_data *d, const struct cpumask *mask, + bool force) +{ + return -EINVAL; +} + +static void tango_compose_msi_msg(struct irq_data *d, struct msi_msg *msg) +{ + struct tango_pcie *pcie = d->chip_data; + msg->address_lo = lower_32_bits(pcie->msi_doorbell); + msg->address_hi = upper_32_bits(pcie->msi_doorbell); + msg->data = d->hwirq; +} + +static struct irq_chip tango_chip = { + .irq_ack = tango_ack, + .irq_mask = tango_mask, + .irq_unmask = tango_unmask, + .irq_set_affinity = tango_set_affinity, + .irq_compose_msi_msg = tango_compose_msi_msg, +}; + +static void msi_ack(struct irq_data *d) +{ + irq_chip_ack_parent(d); +} + +static void msi_mask(struct irq_data *d) +{ + pci_msi_mask_irq(d); + irq_chip_mask_parent(d); +} + +static void msi_unmask(struct irq_data *d) +{ + pci_msi_unmask_irq(d); + irq_chip_unmask_parent(d); +} + +static struct irq_chip msi_chip = { + .name = "MSI", + .irq_ack = msi_ack, + .irq_mask = msi_mask, + .irq_unmask = msi_unmask, +}; + +static struct msi_domain_info msi_dom_info = { + .flags = MSI_FLAG_PCI_MSIX + | MSI_FLAG_USE_DEF_DOM_OPS + | MSI_FLAG_USE_DEF_CHIP_OPS, + .chip = &msi_chip, +}; + +static int tango_irq_domain_alloc(struct irq_domain *dom, unsigned int virq, + unsigned int nr_irqs, void *args) +{ + struct tango_pcie *pcie = dom->host_data; + unsigned long flags; + int pos; + + spin_lock_irqsave(&pcie->used_msi_lock, flags); + pos = find_first_zero_bit(pcie->used_msi, MSI_MAX); + if (pos >= MSI_MAX) { + spin_unlock_irqrestore(&pcie->used_msi_lock, flags); + return -ENOSPC; + } + __set_bit(pos, pcie->used_msi); + spin_unlock_irqrestore(&pcie->used_msi_lock, flags); + irq_domain_set_info(dom, virq, pos, &tango_chip, + pcie, handle_edge_irq, NULL, NULL); + + return 0; +} + +static void tango_irq_domain_free(struct irq_domain *dom, unsigned int virq, + unsigned int nr_irqs) +{ + unsigned long flags; + struct irq_data *d = irq_domain_get_irq_data(dom, virq); + struct tango_pcie *pcie = d->chip_data; + + spin_lock_irqsave(&pcie->used_msi_lock, flags); + __clear_bit(d->hwirq, pcie->used_msi); + spin_unlock_irqrestore(&pcie->used_msi_lock, flags); +} + +static const struct irq_domain_ops dom_ops = { + .alloc = tango_irq_domain_alloc, + .free = tango_irq_domain_free, }; static int smp8759_config_read(struct pci_bus *bus, unsigned int devfn, @@ -77,7 +237,11 @@ static int tango_pcie_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct tango_pcie *pcie; struct resource *res; - int ret; + struct fwnode_handle *fwnode = of_node_to_fwnode(dev->of_node); + struct irq_domain *msi_dom, *irq_dom; + struct of_pci_range_parser parser; + struct of_pci_range range; + int virq, offset; dev_warn(dev, "simultaneous PCI config and MMIO accesses may cause data corruption\n"); add_taint(TAINT_CRAP, LOCKDEP_STILL_OK); @@ -96,6 +260,41 @@ static int tango_pcie_probe(struct platform_device *pdev) if (!tango_pcie_link_up(pcie)) return -ENODEV; + if (of_pci_dma_range_parser_init(&parser, dev->of_node) < 0) + return -ENOENT; + + if (of_pci_range_parser_one(&parser, &range) == NULL) + return -ENOENT; + + range.pci_addr += range.size; + pcie->msi_doorbell = range.pci_addr + res->start + SMP8759_DOORBELL; + + for (offset = 0; offset < MSI_MAX / 8; offset += 4) + writel_relaxed(0, pcie->base + SMP8759_ENABLE + offset); + + virq = platform_get_irq(pdev, 1); + if (virq <= 0) { + dev_err(dev, "Failed to map IRQ\n"); + return -ENXIO; + } + + irq_dom = irq_domain_create_linear(fwnode, MSI_MAX, &dom_ops, pcie); + if (!irq_dom) { + dev_err(dev, "Failed to create IRQ domain\n"); + return -ENOMEM; + } + + msi_dom = pci_msi_create_irq_domain(fwnode, &msi_dom_info, irq_dom); + if (!msi_dom) { + dev_err(dev, "Failed to create MSI domain\n"); + irq_domain_remove(irq_dom); + return -ENOMEM; + } + + pcie->dom = irq_dom; + spin_lock_init(&pcie->used_msi_lock); + irq_set_chained_handler_and_data(virq, tango_msi_isr, pcie); + return pci_host_common_probe(pdev, &smp8759_ecam_ops); } diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c index 94e13cb8608f..7b5325990f5e 100644 --- a/drivers/pci/host/pcie-xilinx.c +++ b/drivers/pci/host/pcie-xilinx.c @@ -129,7 +129,7 @@ static inline void pcie_write(struct xilinx_pcie_port *port, u32 val, u32 reg) writel(val, port->reg_base + reg); } -static inline bool xilinx_pcie_link_is_up(struct xilinx_pcie_port *port) +static inline bool xilinx_pcie_link_up(struct xilinx_pcie_port *port) { return (pcie_read(port, XILINX_PCIE_REG_PSCR) & XILINX_PCIE_REG_PSCR_LNKUP) ? 1 : 0; @@ -165,7 +165,7 @@ static bool xilinx_pcie_valid_device(struct pci_bus *bus, unsigned int devfn) /* Check if link is up when trying to access downstream ports */ if (bus->number != port->root_busno) - if (!xilinx_pcie_link_is_up(port)) + if (!xilinx_pcie_link_up(port)) return false; /* Only one device down on each root port */ @@ -541,7 +541,7 @@ static void xilinx_pcie_init_port(struct xilinx_pcie_port *port) { struct device *dev = port->dev; - if (xilinx_pcie_link_is_up(port)) + if (xilinx_pcie_link_up(port)) dev_info(dev, "PCIe Link is UP\n"); else dev_info(dev, "PCIe Link is DOWN\n"); diff --git a/drivers/pci/hotplug-pci.c b/drivers/pci/hotplug-pci.c deleted file mode 100644 index c68366cee6b7..000000000000 --- a/drivers/pci/hotplug-pci.c +++ /dev/null @@ -1,29 +0,0 @@ -/* Core PCI functionality used only by PCI hotplug */ - -#include <linux/pci.h> -#include <linux/export.h> -#include "pci.h" - -int pci_hp_add_bridge(struct pci_dev *dev) -{ - struct pci_bus *parent = dev->bus; - int pass, busnr, start = parent->busn_res.start; - int end = parent->busn_res.end; - - for (busnr = start; busnr <= end; busnr++) { - if (!pci_find_bus(pci_domain_nr(parent), busnr)) - break; - } - if (busnr-- > end) { - printk(KERN_ERR "No bus number available for hot-added bridge %s\n", - pci_name(dev)); - return -1; - } - for (pass = 0; pass < 2; pass++) - busnr = pci_scan_bridge(parent, dev, busnr, pass); - if (!dev->subordinate) - return -1; - - return 0; -} -EXPORT_SYMBOL_GPL(pci_hp_add_bridge); diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 5ed2dcaa8e27..5db6f1839dad 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -462,18 +462,15 @@ static void enable_slot(struct acpiphp_slot *slot) acpiphp_rescan_slot(slot); max = acpiphp_max_busnr(bus); for (pass = 0; pass < 2; pass++) { - list_for_each_entry(dev, &bus->devices, bus_list) { + for_each_pci_bridge(dev, bus) { if (PCI_SLOT(dev->devfn) != slot->device) continue; - if (pci_is_bridge(dev)) { - max = pci_scan_bridge(bus, dev, max, pass); - if (pass && dev->subordinate) { - check_hotplug_bridge(slot, dev); - pcibios_resource_survey_bus(dev->subordinate); - __pci_bus_size_bridges(dev->subordinate, - &add_list); - } + max = pci_scan_bridge(bus, dev, max, pass); + if (pass && dev->subordinate) { + check_hotplug_bridge(slot, dev); + pcibios_resource_survey_bus(dev->subordinate); + __pci_bus_size_bridges(dev->subordinate, &add_list); } } } diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c index 80c80017197d..f616358fa938 100644 --- a/drivers/pci/hotplug/cpci_hotplug_pci.c +++ b/drivers/pci/hotplug/cpci_hotplug_pci.c @@ -286,14 +286,11 @@ int cpci_configure_slot(struct slot *slot) } parent = slot->dev->bus; - list_for_each_entry(dev, &parent->devices, bus_list) { - if (PCI_SLOT(dev->devfn) != PCI_SLOT(slot->devfn)) - continue; - if (pci_is_bridge(dev)) + for_each_pci_bridge(dev, parent) { + if (PCI_SLOT(dev->devfn) == PCI_SLOT(slot->devfn)) pci_hp_add_bridge(dev); } - pci_assign_unassigned_bridge_resources(parent->self); pci_bus_add_devices(parent); diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h index 48c8a066a6b7..c2bbe6b65d06 100644 --- a/drivers/pci/hotplug/cpqphp.h +++ b/drivers/pci/hotplug/cpqphp.h @@ -410,7 +410,7 @@ void cpqhp_create_debugfs_files(struct controller *ctrl); void cpqhp_remove_debugfs_files(struct controller *ctrl); /* controller functions */ -void cpqhp_pushbutton_thread(unsigned long event_pointer); +void cpqhp_pushbutton_thread(struct timer_list *t); irqreturn_t cpqhp_ctrl_intr(int IRQ, void *data); int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_start); diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c index 4d06b8461255..70967ac75265 100644 --- a/drivers/pci/hotplug/cpqphp_core.c +++ b/drivers/pci/hotplug/cpqphp_core.c @@ -661,9 +661,8 @@ static int ctrl_slot_setup(struct controller *ctrl, slot->p_sm_slot = slot_entry; - init_timer(&slot->task_event); + timer_setup(&slot->task_event, cpqhp_pushbutton_thread, 0); slot->task_event.expires = jiffies + 5 * HZ; - slot->task_event.function = cpqhp_pushbutton_thread; /*FIXME: these capabilities aren't used but if they are * they need to be correctly implemented diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c index a55653b54eed..a93069e739cb 100644 --- a/drivers/pci/hotplug/cpqphp_ctrl.c +++ b/drivers/pci/hotplug/cpqphp_ctrl.c @@ -47,7 +47,7 @@ static void interrupt_event_handler(struct controller *ctrl); static struct task_struct *cpqhp_event_thread; -static unsigned long pushbutton_pending; /* = 0 */ +static struct timer_list *pushbutton_pending; /* = NULL */ /* delay is in jiffies to wait for */ static void long_delay(int delay) @@ -1732,9 +1732,10 @@ static u32 remove_board(struct pci_func *func, u32 replace_flag, struct controll return 0; } -static void pushbutton_helper_thread(unsigned long data) +static void pushbutton_helper_thread(struct timer_list *t) { - pushbutton_pending = data; + pushbutton_pending = t; + wake_up_process(cpqhp_event_thread); } @@ -1883,13 +1884,13 @@ static void interrupt_event_handler(struct controller *ctrl) wait_for_ctrl_irq(ctrl); mutex_unlock(&ctrl->crit_sect); - init_timer(&p_slot->task_event); + timer_setup(&p_slot->task_event, + pushbutton_helper_thread, + 0); p_slot->hp_slot = hp_slot; p_slot->ctrl = ctrl; /* p_slot->physical_slot = physical_slot; */ p_slot->task_event.expires = jiffies + 5 * HZ; /* 5 second delay */ - p_slot->task_event.function = pushbutton_helper_thread; - p_slot->task_event.data = (u32) p_slot; dbg("add_timer p_slot = %p\n", p_slot); add_timer(&p_slot->task_event); @@ -1920,15 +1921,15 @@ static void interrupt_event_handler(struct controller *ctrl) * Scheduled procedure to handle blocking stuff for the pushbuttons. * Handles all pending events and exits. */ -void cpqhp_pushbutton_thread(unsigned long slot) +void cpqhp_pushbutton_thread(struct timer_list *t) { u8 hp_slot; u8 device; struct pci_func *func; - struct slot *p_slot = (struct slot *) slot; + struct slot *p_slot = from_timer(p_slot, t, task_event); struct controller *ctrl = (struct controller *) p_slot->ctrl; - pushbutton_pending = 0; + pushbutton_pending = NULL; hp_slot = p_slot->hp_slot; device = p_slot->device; diff --git a/drivers/pci/hotplug/ibmphp_pci.c b/drivers/pci/hotplug/ibmphp_pci.c index dc1876feb06f..25edd0b18b75 100644 --- a/drivers/pci/hotplug/ibmphp_pci.c +++ b/drivers/pci/hotplug/ibmphp_pci.c @@ -1267,20 +1267,19 @@ static int unconfigure_boot_device(u8 busno, u8 device, u8 function) size = size & 0xFFFFFFFC; size = ~size + 1; end_address = start_address + size - 1; - if (ibmphp_find_resource(bus, start_address, &io, IO) < 0) { - err("cannot find corresponding IO resource to remove\n"); - return -EIO; - } + if (ibmphp_find_resource(bus, start_address, &io, IO)) + goto report_search_failure; + debug("io->start = %x\n", io->start); temp_end = io->end; start_address = io->end + 1; ibmphp_remove_resource(io); /* This is needed b/c of the old I/O restrictions in the BIOS */ while (temp_end < end_address) { - if (ibmphp_find_resource(bus, start_address, &io, IO) < 0) { - err("cannot find corresponding IO resource to remove\n"); - return -EIO; - } + if (ibmphp_find_resource(bus, start_address, + &io, IO)) + goto report_search_failure; + debug("io->start = %x\n", io->start); temp_end = io->end; start_address = io->end + 1; @@ -1327,6 +1326,10 @@ static int unconfigure_boot_device(u8 busno, u8 device, u8 function) } /* end of for */ return 0; + +report_search_failure: + err("cannot find corresponding IO resource to remove\n"); + return -EIO; } static int unconfigure_boot_bridge(u8 busno, u8 device, u8 function) diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index ec0b4c11ccd9..83f3d4af3677 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -113,10 +113,11 @@ static int board_added(struct slot *p_slot) retval = pciehp_configure_device(p_slot); if (retval) { - ctrl_err(ctrl, "Cannot add device at %04x:%02x:00\n", - pci_domain_nr(parent), parent->number); - if (retval != -EEXIST) + if (retval != -EEXIST) { + ctrl_err(ctrl, "Cannot add device at %04x:%02x:00\n", + pci_domain_nr(parent), parent->number); goto err_exit; + } } pciehp_green_led_on(p_slot); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index e5d5ce9e3010..7bab0606f1a9 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -50,14 +50,13 @@ static irqreturn_t pcie_isr(int irq, void *dev_id); static void start_int_poll_timer(struct controller *ctrl, int sec); /* This is the interrupt polling timeout function. */ -static void int_poll_timeout(unsigned long data) +static void int_poll_timeout(struct timer_list *t) { - struct controller *ctrl = (struct controller *)data; + struct controller *ctrl = from_timer(ctrl, t, poll_timer); /* Poll for interrupt events. regs == NULL => polling */ pcie_isr(0, ctrl); - init_timer(&ctrl->poll_timer); if (!pciehp_poll_time) pciehp_poll_time = 2; /* default polling interval is 2 sec */ @@ -71,8 +70,6 @@ static void start_int_poll_timer(struct controller *ctrl, int sec) if ((sec <= 0) || (sec > 60)) sec = 2; - ctrl->poll_timer.function = &int_poll_timeout; - ctrl->poll_timer.data = (unsigned long)ctrl; ctrl->poll_timer.expires = jiffies + sec * HZ; add_timer(&ctrl->poll_timer); } @@ -83,7 +80,7 @@ static inline int pciehp_request_irq(struct controller *ctrl) /* Install interrupt polling timer. Start with 10 sec delay */ if (pciehp_poll_mode) { - init_timer(&ctrl->poll_timer); + timer_setup(&ctrl->poll_timer, int_poll_timeout, 0); start_int_poll_timer(ctrl, 10); return 0; } @@ -764,8 +761,7 @@ int pciehp_reset_slot(struct slot *slot, int probe) ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__, pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, ctrl_mask); if (pciehp_poll_mode) - int_poll_timeout(ctrl->poll_timer.data); - + int_poll_timeout(&ctrl->poll_timer); return 0; } @@ -795,7 +791,7 @@ static int pcie_init_slot(struct controller *ctrl) if (!slot) return -ENOMEM; - slot->wq = alloc_workqueue("pciehp-%u", 0, 0, PSN(ctrl)); + slot->wq = alloc_ordered_workqueue("pciehp-%u", 0, PSN(ctrl)); if (!slot->wq) goto abort; @@ -862,11 +858,16 @@ struct controller *pcie_init(struct pcie_device *dev) if (link_cap & PCI_EXP_LNKCAP_DLLLARC) ctrl->link_active_reporting = 1; - /* Clear all remaining event bits in Slot Status register */ + /* + * Clear all remaining event bits in Slot Status register except + * Presence Detect Changed. We want to make sure possible + * hotplug event is triggered when the interrupt is unmasked so + * that we don't lose that event. + */ pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, PCI_EXP_SLTSTA_ABP | PCI_EXP_SLTSTA_PFD | - PCI_EXP_SLTSTA_MRLSC | PCI_EXP_SLTSTA_PDC | - PCI_EXP_SLTSTA_CC | PCI_EXP_SLTSTA_DLLSC); + PCI_EXP_SLTSTA_MRLSC | PCI_EXP_SLTSTA_CC | + PCI_EXP_SLTSTA_DLLSC); ctrl_info(ctrl, "Slot #%d AttnBtn%c PwrCtrl%c MRL%c AttnInd%c PwrInd%c HotPlug%c Surprise%c Interlock%c NoCompl%c LLActRep%c\n", (slot_cap & PCI_EXP_SLTCAP_PSN) >> 19, diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c index 19f30a9f461d..2a1ca020cf5a 100644 --- a/drivers/pci/hotplug/pciehp_pci.c +++ b/drivers/pci/hotplug/pciehp_pci.c @@ -46,7 +46,11 @@ int pciehp_configure_device(struct slot *p_slot) dev = pci_get_slot(parent, PCI_DEVFN(0, 0)); if (dev) { - ctrl_err(ctrl, "Device %s already exists at %04x:%02x:00, cannot hot-add\n", + /* + * The device is already there. Either configured by the + * boot firmware or a previous hotplug event. + */ + ctrl_dbg(ctrl, "Device %s already exists at %04x:%02x:00, skipping hot-add\n", pci_name(dev), pci_domain_nr(parent), parent->number); pci_dev_put(dev); ret = -EEXIST; @@ -60,9 +64,8 @@ int pciehp_configure_device(struct slot *p_slot) goto out; } - list_for_each_entry(dev, &parent->devices, bus_list) - if (pci_is_bridge(dev)) - pci_hp_add_bridge(dev); + for_each_pci_bridge(dev, parent) + pci_hp_add_bridge(dev); pci_assign_unassigned_bridge_resources(bridge); pcie_bus_configure_settings(parent); diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c index e5824c7b7b6b..4810e9626d9f 100644 --- a/drivers/pci/hotplug/shpchp_hpc.c +++ b/drivers/pci/hotplug/shpchp_hpc.c @@ -229,14 +229,13 @@ static inline int shpc_indirect_read(struct controller *ctrl, int index, /* * This is the interrupt polling timeout function. */ -static void int_poll_timeout(unsigned long data) +static void int_poll_timeout(struct timer_list *t) { - struct controller *ctrl = (struct controller *)data; + struct controller *ctrl = from_timer(ctrl, t, poll_timer); /* Poll for interrupt events. regs == NULL => polling */ shpc_isr(0, ctrl); - init_timer(&ctrl->poll_timer); if (!shpchp_poll_time) shpchp_poll_time = 2; /* default polling interval is 2 sec */ @@ -252,8 +251,6 @@ static void start_int_poll_timer(struct controller *ctrl, int sec) if ((sec <= 0) || (sec > 60)) sec = 2; - ctrl->poll_timer.function = &int_poll_timeout; - ctrl->poll_timer.data = (unsigned long)ctrl; ctrl->poll_timer.expires = jiffies + sec * HZ; add_timer(&ctrl->poll_timer); } @@ -1054,7 +1051,7 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev) if (shpchp_poll_mode) { /* Install interrupt polling timer. Start with 10 sec delay */ - init_timer(&ctrl->poll_timer); + timer_setup(&ctrl->poll_timer, int_poll_timeout, 0); start_int_poll_timer(ctrl, 10); } else { /* Installs the interrupt handler */ diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c index f8cd3a27e351..ea63db58b4b1 100644 --- a/drivers/pci/hotplug/shpchp_pci.c +++ b/drivers/pci/hotplug/shpchp_pci.c @@ -61,10 +61,8 @@ int shpchp_configure_device(struct slot *p_slot) goto out; } - list_for_each_entry(dev, &parent->devices, bus_list) { - if (PCI_SLOT(dev->devfn) != p_slot->device) - continue; - if (pci_is_bridge(dev)) + for_each_pci_bridge(dev, parent) { + if (PCI_SLOT(dev->devfn) == p_slot->device) pci_hp_add_bridge(dev); } diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c index ac41c8be9200..6bacb8995e96 100644 --- a/drivers/pci/iov.c +++ b/drivers/pci/iov.c @@ -113,7 +113,7 @@ resource_size_t pci_iov_resource_size(struct pci_dev *dev, int resno) return dev->sriov->barsz[resno - PCI_IOV_RESOURCES]; } -int pci_iov_add_virtfn(struct pci_dev *dev, int id, int reset) +int pci_iov_add_virtfn(struct pci_dev *dev, int id) { int i; int rc = -ENOMEM; @@ -134,7 +134,7 @@ int pci_iov_add_virtfn(struct pci_dev *dev, int id, int reset) virtfn->devfn = pci_iov_virtfn_devfn(dev, id); virtfn->vendor = dev->vendor; - pci_read_config_word(dev, iov->pos + PCI_SRIOV_VF_DID, &virtfn->device); + virtfn->device = iov->vf_device; rc = pci_setup_device(virtfn); if (rc) goto failed0; @@ -157,12 +157,8 @@ int pci_iov_add_virtfn(struct pci_dev *dev, int id, int reset) BUG_ON(rc); } - if (reset) - __pci_reset_function(virtfn); - pci_device_add(virtfn, virtfn->bus); - pci_bus_add_device(virtfn); sprintf(buf, "virtfn%u", id); rc = sysfs_create_link(&dev->dev.kobj, &virtfn->dev.kobj, buf); if (rc) @@ -173,6 +169,8 @@ int pci_iov_add_virtfn(struct pci_dev *dev, int id, int reset) kobject_uevent(&virtfn->dev.kobj, KOBJ_CHANGE); + pci_bus_add_device(virtfn); + return 0; failed2: @@ -187,7 +185,7 @@ failed: return rc; } -void pci_iov_remove_virtfn(struct pci_dev *dev, int id, int reset) +void pci_iov_remove_virtfn(struct pci_dev *dev, int id) { char buf[VIRTFN_ID_LEN]; struct pci_dev *virtfn; @@ -198,11 +196,6 @@ void pci_iov_remove_virtfn(struct pci_dev *dev, int id, int reset) if (!virtfn) return; - if (reset) { - device_release_driver(&virtfn->dev); - __pci_reset_function(virtfn); - } - sprintf(buf, "virtfn%u", id); sysfs_remove_link(&dev->dev.kobj, buf); /* @@ -317,7 +310,7 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn) pci_cfg_access_unlock(dev); for (i = 0; i < initial; i++) { - rc = pci_iov_add_virtfn(dev, i, 0); + rc = pci_iov_add_virtfn(dev, i); if (rc) goto failed; } @@ -329,7 +322,7 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn) failed: while (i--) - pci_iov_remove_virtfn(dev, i, 0); + pci_iov_remove_virtfn(dev, i); err_pcibios: iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE); @@ -356,7 +349,7 @@ static void sriov_disable(struct pci_dev *dev) return; for (i = 0; i < iov->num_VFs; i++) - pci_iov_remove_virtfn(dev, i, 0); + pci_iov_remove_virtfn(dev, i); iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE); pci_cfg_access_lock(dev); @@ -449,6 +442,7 @@ found: iov->nres = nres; iov->ctrl = ctrl; iov->total_VFs = total; + pci_read_config_word(dev, pos + PCI_SRIOV_VF_DID, &iov->vf_device); iov->pgsz = pgsz; iov->self = dev; iov->drivers_autoprobe = true; @@ -504,6 +498,14 @@ static void sriov_restore_state(struct pci_dev *dev) if (ctrl & PCI_SRIOV_CTRL_VFE) return; + /* + * Restore PCI_SRIOV_CTRL_ARI before pci_iov_set_numvfs() because + * it reads offset & stride, which depend on PCI_SRIOV_CTRL_ARI. + */ + ctrl &= ~PCI_SRIOV_CTRL_ARI; + ctrl |= iov->ctrl & PCI_SRIOV_CTRL_ARI; + pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, ctrl); + for (i = PCI_IOV_RESOURCES; i <= PCI_IOV_RESOURCE_END; i++) pci_update_resource(dev, i); @@ -724,7 +726,7 @@ int pci_vfs_assigned(struct pci_dev *dev) * determine the device ID for the VFs, the vendor ID will be the * same as the PF so there is no need to check for that one */ - pci_read_config_word(dev, dev->sriov->pos + PCI_SRIOV_VF_DID, &dev_id); + dev_id = dev->sriov->vf_device; /* loop through all the VFs to see if we own any that are assigned */ vfdev = pci_get_device(dev->vendor, dev_id, NULL); diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index a8da543b3814..4708eb9df71b 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -624,7 +624,7 @@ void acpi_pci_add_bus(struct pci_bus *bus) union acpi_object *obj; struct pci_host_bridge *bridge; - if (acpi_pci_disabled || !bus->bridge) + if (acpi_pci_disabled || !bus->bridge || !ACPI_HANDLE(bus->bridge)) return; acpi_pci_slot_enumerate(bus); diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 00fa4278c1f4..06c7f0b85cd2 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -649,6 +649,33 @@ exit: return count; } +static ssize_t sriov_offset_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct pci_dev *pdev = to_pci_dev(dev); + + return sprintf(buf, "%u\n", pdev->sriov->offset); +} + +static ssize_t sriov_stride_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct pci_dev *pdev = to_pci_dev(dev); + + return sprintf(buf, "%u\n", pdev->sriov->stride); +} + +static ssize_t sriov_vf_device_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct pci_dev *pdev = to_pci_dev(dev); + + return sprintf(buf, "%x\n", pdev->sriov->vf_device); +} + static ssize_t sriov_drivers_autoprobe_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -677,6 +704,9 @@ static struct device_attribute sriov_totalvfs_attr = __ATTR_RO(sriov_totalvfs); static struct device_attribute sriov_numvfs_attr = __ATTR(sriov_numvfs, (S_IRUGO|S_IWUSR|S_IWGRP), sriov_numvfs_show, sriov_numvfs_store); +static struct device_attribute sriov_offset_attr = __ATTR_RO(sriov_offset); +static struct device_attribute sriov_stride_attr = __ATTR_RO(sriov_stride); +static struct device_attribute sriov_vf_device_attr = __ATTR_RO(sriov_vf_device); static struct device_attribute sriov_drivers_autoprobe_attr = __ATTR(sriov_drivers_autoprobe, (S_IRUGO|S_IWUSR|S_IWGRP), sriov_drivers_autoprobe_show, sriov_drivers_autoprobe_store); @@ -1749,6 +1779,9 @@ static const struct attribute_group pci_dev_hp_attr_group = { static struct attribute *sriov_dev_attrs[] = { &sriov_totalvfs_attr.attr, &sriov_numvfs_attr.attr, + &sriov_offset_attr.attr, + &sriov_stride_attr.attr, + &sriov_vf_device_attr.attr, &sriov_drivers_autoprobe_attr.attr, NULL, }; @@ -1796,6 +1829,6 @@ static const struct attribute_group *pci_dev_attr_groups[] = { NULL, }; -struct device_type pci_dev_type = { +const struct device_type pci_dev_type = { .groups = pci_dev_attr_groups, }; diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 374f5686e2bc..4a7c6864fdf4 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2965,6 +2965,107 @@ bool pci_acs_path_enabled(struct pci_dev *start, } /** + * pci_rebar_find_pos - find position of resize ctrl reg for BAR + * @pdev: PCI device + * @bar: BAR to find + * + * Helper to find the position of the ctrl register for a BAR. + * Returns -ENOTSUPP if resizable BARs are not supported at all. + * Returns -ENOENT if no ctrl register for the BAR could be found. + */ +static int pci_rebar_find_pos(struct pci_dev *pdev, int bar) +{ + unsigned int pos, nbars, i; + u32 ctrl; + + pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_REBAR); + if (!pos) + return -ENOTSUPP; + + pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl); + nbars = (ctrl & PCI_REBAR_CTRL_NBAR_MASK) >> + PCI_REBAR_CTRL_NBAR_SHIFT; + + for (i = 0; i < nbars; i++, pos += 8) { + int bar_idx; + + pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl); + bar_idx = ctrl & PCI_REBAR_CTRL_BAR_IDX; + if (bar_idx == bar) + return pos; + } + + return -ENOENT; +} + +/** + * pci_rebar_get_possible_sizes - get possible sizes for BAR + * @pdev: PCI device + * @bar: BAR to query + * + * Get the possible sizes of a resizable BAR as bitmask defined in the spec + * (bit 0=1MB, bit 19=512GB). Returns 0 if BAR isn't resizable. + */ +u32 pci_rebar_get_possible_sizes(struct pci_dev *pdev, int bar) +{ + int pos; + u32 cap; + + pos = pci_rebar_find_pos(pdev, bar); + if (pos < 0) + return 0; + + pci_read_config_dword(pdev, pos + PCI_REBAR_CAP, &cap); + return (cap & PCI_REBAR_CAP_SIZES) >> 4; +} + +/** + * pci_rebar_get_current_size - get the current size of a BAR + * @pdev: PCI device + * @bar: BAR to set size to + * + * Read the size of a BAR from the resizable BAR config. + * Returns size if found or negative error code. + */ +int pci_rebar_get_current_size(struct pci_dev *pdev, int bar) +{ + int pos; + u32 ctrl; + + pos = pci_rebar_find_pos(pdev, bar); + if (pos < 0) + return pos; + + pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl); + return (ctrl & PCI_REBAR_CTRL_BAR_SIZE) >> 8; +} + +/** + * pci_rebar_set_size - set a new size for a BAR + * @pdev: PCI device + * @bar: BAR to set size to + * @size: new size as defined in the spec (0=1MB, 19=512GB) + * + * Set the new size of a BAR as defined in the spec. + * Returns zero if resizing was successful, error code otherwise. + */ +int pci_rebar_set_size(struct pci_dev *pdev, int bar, int size) +{ + int pos; + u32 ctrl; + + pos = pci_rebar_find_pos(pdev, bar); + if (pos < 0) + return pos; + + pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl); + ctrl &= ~PCI_REBAR_CTRL_BAR_SIZE; + ctrl |= size << 8; + pci_write_config_dword(pdev, pos + PCI_REBAR_CTRL, ctrl); + return 0; +} + +/** * pci_swizzle_interrupt_pin - swizzle INTx for device behind bridge * @dev: the PCI device * @pin: the INTx pin (1=INTA, 2=INTB, 3=INTC, 4=INTD) @@ -3470,7 +3571,7 @@ EXPORT_SYMBOL(devm_pci_remap_cfgspace); * All operations are managed and will be undone on driver detach. * * Returns a pointer to the remapped memory or an ERR_PTR() encoded error code - * on failure. Usage example: + * on failure. Usage example:: * * res = platform_get_resource(pdev, IORESOURCE_MEM, 0); * base = devm_pci_remap_cfg_resource(&pdev->dev, res); @@ -4145,35 +4246,6 @@ static void pci_dev_restore(struct pci_dev *dev) } /** - * __pci_reset_function - reset a PCI device function - * @dev: PCI device to reset - * - * Some devices allow an individual function to be reset without affecting - * other functions in the same device. The PCI device must be responsive - * to PCI config space in order to use this function. - * - * The device function is presumed to be unused when this function is called. - * Resetting the device will make the contents of PCI configuration space - * random, so any caller of this must be prepared to reinitialise the - * device including MSI, bus mastering, BARs, decoding IO and memory spaces, - * etc. - * - * Returns 0 if the device function was successfully reset or negative if the - * device doesn't support resetting a single function. - */ -int __pci_reset_function(struct pci_dev *dev) -{ - int ret; - - pci_dev_lock(dev); - ret = __pci_reset_function_locked(dev); - pci_dev_unlock(dev); - - return ret; -} -EXPORT_SYMBOL_GPL(__pci_reset_function); - -/** * __pci_reset_function_locked - reset a PCI device function while holding * the @dev mutex lock. * @dev: PCI device to reset @@ -4198,6 +4270,14 @@ int __pci_reset_function_locked(struct pci_dev *dev) might_sleep(); + /* + * A reset method returns -ENOTTY if it doesn't support this device + * and we should try the next method. + * + * If it returns 0 (success), we're finished. If it returns any + * other error, we're also finished: this indicates that further + * reset mechanisms might be broken on the device. + */ rc = pci_dev_specific_reset(dev, 0); if (rc != -ENOTTY) return rc; @@ -4263,8 +4343,8 @@ int pci_probe_reset_function(struct pci_dev *dev) * * This function does not just reset the PCI portion of a device, but * clears all the state associated with the device. This function differs - * from __pci_reset_function in that it saves and restores device state - * over the reset. + * from __pci_reset_function_locked() in that it saves and restores device state + * over the reset and takes the PCI device lock. * * Returns 0 if the device function was successfully reset or negative if the * device doesn't support resetting a single function. @@ -4299,7 +4379,7 @@ EXPORT_SYMBOL_GPL(pci_reset_function); * * This function does not just reset the PCI portion of a device, but * clears all the state associated with the device. This function differs - * from __pci_reset_function() in that it saves and restores device state + * from __pci_reset_function_locked() in that it saves and restores device state * over the reset. It also differs from pci_reset_function() in that it * requires the PCI device lock to be held. * @@ -4355,6 +4435,10 @@ static bool pci_bus_resetable(struct pci_bus *bus) { struct pci_dev *dev; + + if (bus->self && (bus->self->dev_flags & PCI_DEV_FLAGS_NO_BUS_RESET)) + return false; + list_for_each_entry(dev, &bus->devices, bus_list) { if (dev->dev_flags & PCI_DEV_FLAGS_NO_BUS_RESET || (dev->subordinate && !pci_bus_resetable(dev->subordinate))) @@ -4419,6 +4503,10 @@ static bool pci_slot_resetable(struct pci_slot *slot) { struct pci_dev *dev; + if (slot->bus->self && + (slot->bus->self->dev_flags & PCI_DEV_FLAGS_NO_BUS_RESET)) + return false; + list_for_each_entry(dev, &slot->bus->devices, bus_list) { if (!dev->slot || dev->slot != slot) continue; diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index fdb02c1f94bb..f6b58b32a67c 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -193,7 +193,7 @@ static inline int pci_no_d1d2(struct pci_dev *dev) } extern const struct attribute_group *pci_dev_groups[]; extern const struct attribute_group *pcibus_groups[]; -extern struct device_type pci_dev_type; +extern const struct device_type pci_dev_type; extern const struct attribute_group *pci_bus_groups[]; @@ -264,6 +264,7 @@ struct pci_sriov { u16 num_VFs; /* number of VFs available */ u16 offset; /* first VF Routing ID offset */ u16 stride; /* following VF stride */ + u16 vf_device; /* VF device ID */ u32 pgsz; /* page size for BAR alignment */ u8 link; /* Function Dependency Link */ u8 max_VF_buses; /* max buses consumed by VFs */ @@ -367,4 +368,12 @@ int acpi_get_rc_resources(struct device *dev, const char *hid, u16 segment, struct resource *res); #endif +u32 pci_rebar_get_possible_sizes(struct pci_dev *pdev, int bar); +int pci_rebar_get_current_size(struct pci_dev *pdev, int bar); +int pci_rebar_set_size(struct pci_dev *pdev, int bar, int size); +static inline u64 pci_rebar_size_to_bytes(int size) +{ + return 1ULL << (size + 20); +} + #endif /* DRIVERS_PCI_H */ diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index 890efcc574cb..744805232155 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -390,7 +390,14 @@ static pci_ers_result_t broadcast_error_message(struct pci_dev *dev, * If the error is reported by an end point, we think this * error is related to the upstream link of the end point. */ - pci_walk_bus(dev->bus, cb, &result_data); + if (state == pci_channel_io_normal) + /* + * the error is non fatal so the bus is ok, just invoke + * the callback for the function that logged the error. + */ + cb(dev, &result_data); + else + pci_walk_bus(dev->bus, cb, &result_data); } return result_data.result; diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index af2c0023a1c2..9783e10da3a9 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -451,24 +451,25 @@ static void aspm_calc_l1ss_info(struct pcie_link_state *link, if (!(link->aspm_support & ASPM_STATE_L1_2_MASK)) return; - /* Choose the greater of the two T_cmn_mode_rstr_time */ - val1 = (upreg->l1ss_cap >> 8) & 0xFF; - val2 = (upreg->l1ss_cap >> 8) & 0xFF; + /* Choose the greater of the two Port Common_Mode_Restore_Times */ + val1 = (upreg->l1ss_cap & PCI_L1SS_CAP_CM_RESTORE_TIME) >> 8; + val2 = (dwreg->l1ss_cap & PCI_L1SS_CAP_CM_RESTORE_TIME) >> 8; if (val1 > val2) link->l1ss.ctl1 |= val1 << 8; else link->l1ss.ctl1 |= val2 << 8; + /* * We currently use LTR L1.2 threshold to be fixed constant picked from * Intel's coreboot. */ link->l1ss.ctl1 |= LTR_L1_2_THRESHOLD_BITS; - /* Choose the greater of the two T_pwr_on */ - val1 = (upreg->l1ss_cap >> 19) & 0x1F; - scale1 = (upreg->l1ss_cap >> 16) & 0x03; - val2 = (dwreg->l1ss_cap >> 19) & 0x1F; - scale2 = (dwreg->l1ss_cap >> 16) & 0x03; + /* Choose the greater of the two Port T_POWER_ON times */ + val1 = (upreg->l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_VALUE) >> 19; + scale1 = (upreg->l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_SCALE) >> 16; + val2 = (dwreg->l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_VALUE) >> 19; + scale2 = (dwreg->l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_SCALE) >> 16; if (calc_l1ss_pwron(link->pdev, scale1, val1) > calc_l1ss_pwron(link->downstream, scale2, val2)) @@ -647,21 +648,26 @@ static void pcie_config_aspm_l1ss(struct pcie_link_state *link, u32 state) if (enable_req & ASPM_STATE_L1_2_MASK) { - /* Program T_pwr_on in both ports */ + /* Program T_POWER_ON times in both ports */ pci_write_config_dword(parent, up_cap_ptr + PCI_L1SS_CTL2, link->l1ss.ctl2); pci_write_config_dword(child, dw_cap_ptr + PCI_L1SS_CTL2, link->l1ss.ctl2); - /* Program T_cmn_mode in parent */ + /* Program Common_Mode_Restore_Time in upstream device */ pci_clear_and_set_dword(parent, up_cap_ptr + PCI_L1SS_CTL1, - 0xFF00, link->l1ss.ctl1); - - /* Program LTR L1.2 threshold in both ports */ - pci_clear_and_set_dword(parent, dw_cap_ptr + PCI_L1SS_CTL1, - 0xE3FF0000, link->l1ss.ctl1); + PCI_L1SS_CTL1_CM_RESTORE_TIME, + link->l1ss.ctl1); + + /* Program LTR_L1.2_THRESHOLD time in both ports */ + pci_clear_and_set_dword(parent, up_cap_ptr + PCI_L1SS_CTL1, + PCI_L1SS_CTL1_LTR_L12_TH_VALUE | + PCI_L1SS_CTL1_LTR_L12_TH_SCALE, + link->l1ss.ctl1); pci_clear_and_set_dword(child, dw_cap_ptr + PCI_L1SS_CTL1, - 0xE3FF0000, link->l1ss.ctl1); + PCI_L1SS_CTL1_LTR_L12_TH_VALUE | + PCI_L1SS_CTL1_LTR_L12_TH_SCALE, + link->l1ss.ctl1); } val = 0; @@ -803,10 +809,14 @@ static struct pcie_link_state *alloc_pcie_link_state(struct pci_dev *pdev) /* * Root Ports and PCI/PCI-X to PCIe Bridges are roots of PCIe - * hierarchies. + * hierarchies. Note that some PCIe host implementations omit + * the root ports entirely, in which case a downstream port on + * a switch may become the root of the link state chain for all + * its subordinate endpoints. */ if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT || - pci_pcie_type(pdev) == PCI_EXP_TYPE_PCIE_BRIDGE) { + pci_pcie_type(pdev) == PCI_EXP_TYPE_PCIE_BRIDGE || + !pdev->bus->parent->self) { link->root = link; } else { struct pcie_link_state *parent; diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c index fafdb165dd2e..df290aa58dce 100644 --- a/drivers/pci/pcie/pme.c +++ b/drivers/pci/pcie/pme.c @@ -226,6 +226,9 @@ static void pcie_pme_work_fn(struct work_struct *work) break; pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta); + if (rtsta == (u32) ~0) + break; + if (rtsta & PCI_EXP_RTSTA_PME) { /* * Clear PME status of the port. If there are other @@ -273,7 +276,7 @@ static irqreturn_t pcie_pme_irq(int irq, void *context) spin_lock_irqsave(&data->lock, flags); pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta); - if (!(rtsta & PCI_EXP_RTSTA_PME)) { + if (rtsta == (u32) ~0 || !(rtsta & PCI_EXP_RTSTA_PME)) { spin_unlock_irqrestore(&data->lock, flags); return IRQ_NONE; } diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index ebc9d45bd731..a59210350c44 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -44,134 +44,113 @@ static void release_pcie_device(struct device *dev) kfree(to_pcie_device(dev)); } -/** - * pcie_port_enable_irq_vec - try to set up MSI-X or MSI as interrupt mode - * for given port - * @dev: PCI Express port to handle - * @irqs: Array of interrupt vectors to populate - * @mask: Bitmask of port capabilities returned by get_port_device_capability() - * - * Return value: 0 on success, error code on failure +/* + * Fill in *pme, *aer, *dpc with the relevant Interrupt Message Numbers if + * services are enabled in "mask". Return the number of MSI/MSI-X vectors + * required to accommodate the largest Message Number. */ -static int pcie_port_enable_irq_vec(struct pci_dev *dev, int *irqs, int mask) +static int pcie_message_numbers(struct pci_dev *dev, int mask, + u32 *pme, u32 *aer, u32 *dpc) { - int nr_entries, entry, nvec = 0; + u32 nvec = 0, pos, reg32; + u16 reg16; /* - * Allocate as many entries as the port wants, so that we can check - * which of them will be useful. Moreover, if nr_entries is correctly - * equal to the number of entries this port actually uses, we'll happily - * go through without any tricks. + * The Interrupt Message Number indicates which vector is used, i.e., + * the MSI-X table entry or the MSI offset between the base Message + * Data and the generated interrupt message. See PCIe r3.1, sec + * 7.8.2, 7.10.10, 7.31.2. */ - nr_entries = pci_alloc_irq_vectors(dev, 1, PCIE_PORT_MAX_MSI_ENTRIES, - PCI_IRQ_MSIX | PCI_IRQ_MSI); - if (nr_entries < 0) - return nr_entries; if (mask & (PCIE_PORT_SERVICE_PME | PCIE_PORT_SERVICE_HP)) { - u16 reg16; - - /* - * Per PCIe r3.1, sec 6.1.6, "PME and Hot-Plug Event - * interrupts (when both are implemented) always share the - * same MSI or MSI-X vector, as indicated by the Interrupt - * Message Number field in the PCI Express Capabilities - * register". - * - * Per sec 7.8.2, "For MSI, the [Interrupt Message Number] - * indicates the offset between the base Message Data and - * the interrupt message that is generated." - * - * "For MSI-X, the [Interrupt Message Number] indicates - * which MSI-X Table entry is used to generate the - * interrupt message." - */ pcie_capability_read_word(dev, PCI_EXP_FLAGS, ®16); - entry = (reg16 & PCI_EXP_FLAGS_IRQ) >> 9; - if (entry >= nr_entries) - goto out_free_irqs; - - irqs[PCIE_PORT_SERVICE_PME_SHIFT] = pci_irq_vector(dev, entry); - irqs[PCIE_PORT_SERVICE_HP_SHIFT] = pci_irq_vector(dev, entry); - - nvec = max(nvec, entry + 1); + *pme = (reg16 & PCI_EXP_FLAGS_IRQ) >> 9; + nvec = *pme + 1; } if (mask & PCIE_PORT_SERVICE_AER) { - u32 reg32, pos; - - /* - * Per PCIe r3.1, sec 7.10.10, the Advanced Error Interrupt - * Message Number in the Root Error Status register - * indicates which MSI/MSI-X vector is used for AER. - * - * "For MSI, the [Advanced Error Interrupt Message Number] - * indicates the offset between the base Message Data and - * the interrupt message that is generated." - * - * "For MSI-X, the [Advanced Error Interrupt Message - * Number] indicates which MSI-X Table entry is used to - * generate the interrupt message." - */ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); - pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, ®32); - entry = reg32 >> 27; - if (entry >= nr_entries) - goto out_free_irqs; - - irqs[PCIE_PORT_SERVICE_AER_SHIFT] = pci_irq_vector(dev, entry); - - nvec = max(nvec, entry + 1); + if (pos) { + pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, + ®32); + *aer = (reg32 & PCI_ERR_ROOT_AER_IRQ) >> 27; + nvec = max(nvec, *aer + 1); + } } if (mask & PCIE_PORT_SERVICE_DPC) { - u16 reg16, pos; - - /* - * Per PCIe r4.0 (v0.9), sec 7.9.15.2, the DPC Interrupt - * Message Number in the DPC Capability register indicates - * which MSI/MSI-X vector is used for DPC. - * - * "For MSI, the [DPC Interrupt Message Number] indicates - * the offset between the base Message Data and the - * interrupt message that is generated." - * - * "For MSI-X, the [DPC Interrupt Message Number] indicates - * which MSI-X Table entry is used to generate the - * interrupt message." - */ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC); - pci_read_config_word(dev, pos + PCI_EXP_DPC_CAP, ®16); - entry = reg16 & 0x1f; - if (entry >= nr_entries) - goto out_free_irqs; + if (pos) { + pci_read_config_word(dev, pos + PCI_EXP_DPC_CAP, + ®16); + *dpc = reg16 & PCI_EXP_DPC_IRQ; + nvec = max(nvec, *dpc + 1); + } + } + + return nvec; +} - irqs[PCIE_PORT_SERVICE_DPC_SHIFT] = pci_irq_vector(dev, entry); +/** + * pcie_port_enable_irq_vec - try to set up MSI-X or MSI as interrupt mode + * for given port + * @dev: PCI Express port to handle + * @irqs: Array of interrupt vectors to populate + * @mask: Bitmask of port capabilities returned by get_port_device_capability() + * + * Return value: 0 on success, error code on failure + */ +static int pcie_port_enable_irq_vec(struct pci_dev *dev, int *irqs, int mask) +{ + int nr_entries, nvec; + u32 pme = 0, aer = 0, dpc = 0; - nvec = max(nvec, entry + 1); + /* Allocate the maximum possible number of MSI/MSI-X vectors */ + nr_entries = pci_alloc_irq_vectors(dev, 1, PCIE_PORT_MAX_MSI_ENTRIES, + PCI_IRQ_MSIX | PCI_IRQ_MSI); + if (nr_entries < 0) + return nr_entries; + + /* See how many and which Interrupt Message Numbers we actually use */ + nvec = pcie_message_numbers(dev, mask, &pme, &aer, &dpc); + if (nvec > nr_entries) { + pci_free_irq_vectors(dev); + return -EIO; } /* - * If nvec is equal to the allocated number of entries, we can just use - * what we have. Otherwise, the port has some extra entries not for the - * services we know and we need to work around that. + * If we allocated more than we need, free them and reallocate fewer. + * + * Reallocating may change the specific vectors we get, so + * pci_irq_vector() must be done *after* the reallocation. + * + * If we're using MSI, hardware is *allowed* to change the Interrupt + * Message Numbers when we free and reallocate the vectors, but we + * assume it won't because we allocate enough vectors for the + * biggest Message Number we found. */ if (nvec != nr_entries) { - /* Drop the temporary MSI-X setup */ pci_free_irq_vectors(dev); - /* Now allocate the MSI-X vectors for real */ nr_entries = pci_alloc_irq_vectors(dev, nvec, nvec, PCI_IRQ_MSIX | PCI_IRQ_MSI); if (nr_entries < 0) return nr_entries; } - return 0; + /* PME and hotplug share an MSI/MSI-X vector */ + if (mask & (PCIE_PORT_SERVICE_PME | PCIE_PORT_SERVICE_HP)) { + irqs[PCIE_PORT_SERVICE_PME_SHIFT] = pci_irq_vector(dev, pme); + irqs[PCIE_PORT_SERVICE_HP_SHIFT] = pci_irq_vector(dev, pme); + } -out_free_irqs: - pci_free_irq_vectors(dev); - return -EIO; + if (mask & PCIE_PORT_SERVICE_AER) + irqs[PCIE_PORT_SERVICE_AER_SHIFT] = pci_irq_vector(dev, aer); + + if (mask & PCIE_PORT_SERVICE_DPC) + irqs[PCIE_PORT_SERVICE_DPC_SHIFT] = pci_irq_vector(dev, dpc); + + return 0; } /** diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 68c389c7b975..ffbf4e723527 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -247,6 +247,7 @@ static struct pci_driver pcie_portdriver = { .probe = pcie_portdrv_probe, .remove = pcie_portdrv_remove, + .shutdown = pcie_portdrv_remove, .err_handler = &pcie_portdrv_err_handler, diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index ff94b69738a8..14e0ea1ff38b 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -959,7 +959,21 @@ static void pci_enable_crs(struct pci_dev *pdev) PCI_EXP_RTCTL_CRSSVE); } +static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus, + unsigned int available_buses); + /* + * pci_scan_bridge_extend() - Scan buses behind a bridge + * @bus: Parent bus the bridge is on + * @dev: Bridge itself + * @max: Starting subordinate number of buses behind this bridge + * @available_buses: Total number of buses available for this bridge and + * the devices below. After the minimal bus space has + * been allocated the remaining buses will be + * distributed equally between hotplug-capable bridges. + * @pass: Either %0 (scan already configured bridges) or %1 (scan bridges + * that need to be reconfigured. + * * If it's a bridge, configure it and scan the bus behind it. * For CardBus bridges, we don't scan behind as the devices will * be handled by the bridge driver itself. @@ -969,7 +983,9 @@ static void pci_enable_crs(struct pci_dev *pdev) * them, we proceed to assigning numbers to the remaining buses in * order to avoid overlaps between old and new bus numbers. */ -int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass) +static int pci_scan_bridge_extend(struct pci_bus *bus, struct pci_dev *dev, + int max, unsigned int available_buses, + int pass) { struct pci_bus *child; int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS); @@ -1076,9 +1092,13 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass) child = pci_add_new_bus(bus, dev, max+1); if (!child) goto out; - pci_bus_insert_busn_res(child, max+1, 0xff); + pci_bus_insert_busn_res(child, max+1, + bus->busn_res.end); } max++; + if (available_buses) + available_buses--; + buses = (buses & 0xff000000) | ((unsigned int)(child->primary) << 0) | ((unsigned int)(child->busn_res.start) << 8) @@ -1100,7 +1120,7 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass) if (!is_cardbus) { child->bridge_ctl = bctl; - max = pci_scan_child_bus(child); + max = pci_scan_child_bus_extend(child, available_buses); } else { /* * For CardBus bridges, we leave 4 bus numbers @@ -1168,6 +1188,28 @@ out: return max; } + +/* + * pci_scan_bridge() - Scan buses behind a bridge + * @bus: Parent bus the bridge is on + * @dev: Bridge itself + * @max: Starting subordinate number of buses behind this bridge + * @pass: Either %0 (scan already configured bridges) or %1 (scan bridges + * that need to be reconfigured. + * + * If it's a bridge, configure it and scan the bus behind it. + * For CardBus bridges, we don't scan behind as the devices will + * be handled by the bridge driver itself. + * + * We need to process bridges in two passes -- first we scan those + * already configured by the BIOS and after we are done with all of + * them, we proceed to assigning numbers to the remaining buses in + * order to avoid overlaps between old and new bus numbers. + */ +int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass) +{ + return pci_scan_bridge_extend(bus, dev, max, 0, pass); +} EXPORT_SYMBOL(pci_scan_bridge); /* @@ -2396,9 +2438,24 @@ void __weak pcibios_fixup_bus(struct pci_bus *bus) /* nothing to do, expected to be removed in the future */ } -unsigned int pci_scan_child_bus(struct pci_bus *bus) +/** + * pci_scan_child_bus_extend() - Scan devices below a bus + * @bus: Bus to scan for devices + * @available_buses: Total number of buses available (%0 does not try to + * extend beyond the minimal) + * + * Scans devices below @bus including subordinate buses. Returns new + * subordinate number including all the found devices. Passing + * @available_buses causes the remaining bus space to be distributed + * equally between hotplug-capable bridges to allow future extension of the + * hierarchy. + */ +static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus, + unsigned int available_buses) { - unsigned int devfn, pass, max = bus->busn_res.start; + unsigned int used_buses, normal_bridges = 0, hotplug_bridges = 0; + unsigned int start = bus->busn_res.start; + unsigned int devfn, cmax, max = start; struct pci_dev *dev; dev_dbg(&bus->dev, "scanning bus\n"); @@ -2408,7 +2465,8 @@ unsigned int pci_scan_child_bus(struct pci_bus *bus) pci_scan_slot(bus, devfn); /* Reserve buses for SR-IOV capability. */ - max += pci_iov_bus_range(bus); + used_buses = pci_iov_bus_range(bus); + max += used_buses; /* * After performing arch-dependent fixup of the bus, look behind @@ -2420,19 +2478,73 @@ unsigned int pci_scan_child_bus(struct pci_bus *bus) bus->is_added = 1; } - for (pass = 0; pass < 2; pass++) - list_for_each_entry(dev, &bus->devices, bus_list) { - if (pci_is_bridge(dev)) - max = pci_scan_bridge(bus, dev, max, pass); + /* + * Calculate how many hotplug bridges and normal bridges there + * are on this bus. We will distribute the additional available + * buses between hotplug bridges. + */ + for_each_pci_bridge(dev, bus) { + if (dev->is_hotplug_bridge) + hotplug_bridges++; + else + normal_bridges++; + } + + /* + * Scan bridges that are already configured. We don't touch them + * unless they are misconfigured (which will be done in the second + * scan below). + */ + for_each_pci_bridge(dev, bus) { + cmax = max; + max = pci_scan_bridge_extend(bus, dev, max, 0, 0); + used_buses += cmax - max; + } + + /* Scan bridges that need to be reconfigured */ + for_each_pci_bridge(dev, bus) { + unsigned int buses = 0; + + if (!hotplug_bridges && normal_bridges == 1) { + /* + * There is only one bridge on the bus (upstream + * port) so it gets all available buses which it + * can then distribute to the possible hotplug + * bridges below. + */ + buses = available_buses; + } else if (dev->is_hotplug_bridge) { + /* + * Distribute the extra buses between hotplug + * bridges if any. + */ + buses = available_buses / hotplug_bridges; + buses = min(buses, available_buses - used_buses); } + cmax = max; + max = pci_scan_bridge_extend(bus, dev, cmax, buses, 1); + used_buses += max - cmax; + } + /* * Make sure a hotplug bridge has at least the minimum requested - * number of buses. + * number of buses but allow it to grow up to the maximum available + * bus number of there is room. */ - if (bus->self && bus->self->is_hotplug_bridge && pci_hotplug_bus_size) { - if (max - bus->busn_res.start < pci_hotplug_bus_size - 1) - max = bus->busn_res.start + pci_hotplug_bus_size - 1; + if (bus->self && bus->self->is_hotplug_bridge) { + used_buses = max_t(unsigned int, available_buses, + pci_hotplug_bus_size - 1); + if (max - start < used_buses) { + max = start + used_buses; + + /* Do not allocate more buses than we have room left */ + if (max > bus->busn_res.end) + max = bus->busn_res.end; + + dev_dbg(&bus->dev, "%pR extended by %#02x\n", + &bus->busn_res, max - start); + } } /* @@ -2445,6 +2557,18 @@ unsigned int pci_scan_child_bus(struct pci_bus *bus) dev_dbg(&bus->dev, "bus scan returning with max=%02x\n", max); return max; } + +/** + * pci_scan_child_bus() - Scan devices below a bus + * @bus: Bus to scan for devices + * + * Scans devices below @bus including subordinate buses. Returns new + * subordinate number including all the found devices. + */ +unsigned int pci_scan_child_bus(struct pci_bus *bus) +{ + return pci_scan_child_bus_extend(bus, 0); +} EXPORT_SYMBOL_GPL(pci_scan_child_bus); /** @@ -2737,3 +2861,38 @@ void __init pci_sort_breadthfirst(void) { bus_sort_breadthfirst(&pci_bus_type, &pci_sort_bf_cmp); } + +int pci_hp_add_bridge(struct pci_dev *dev) +{ + struct pci_bus *parent = dev->bus; + int busnr, start = parent->busn_res.start; + unsigned int available_buses = 0; + int end = parent->busn_res.end; + + for (busnr = start; busnr <= end; busnr++) { + if (!pci_find_bus(pci_domain_nr(parent), busnr)) + break; + } + if (busnr-- > end) { + dev_err(&dev->dev, "No bus number available for hot-added bridge\n"); + return -1; + } + + /* Scan bridges that are already configured */ + busnr = pci_scan_bridge(parent, dev, busnr, 0); + + /* + * Distribute the available bus numbers between hotplug-capable + * bridges to make extending the chain later possible. + */ + available_buses = end - busnr; + + /* Scan bridges that need to be reconfigured */ + pci_scan_bridge_extend(parent, dev, busnr, available_buses, 1); + + if (!dev->subordinate) + return -1; + + return 0; +} +EXPORT_SYMBOL_GPL(pci_hp_add_bridge); diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 911b3b65c8b2..10684b17d0bd 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -3366,6 +3366,13 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0032, quirk_no_bus_reset); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x003c, quirk_no_bus_reset); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0033, quirk_no_bus_reset); +/* + * Root port on some Cavium CN8xxx chips do not successfully complete a bus + * reset when used with certain child devices. After the reset, config + * accesses to the child may fail. + */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CAVIUM, 0xa100, quirk_no_bus_reset); + static void quirk_no_pm_reset(struct pci_dev *dev) { /* @@ -4212,17 +4219,32 @@ static int pci_quirk_amd_sb_acs(struct pci_dev *dev, u16 acs_flags) #endif } +static bool pci_quirk_cavium_acs_match(struct pci_dev *dev) +{ + /* + * Effectively selects all downstream ports for whole ThunderX 1 + * family by 0xf800 mask (which represents 8 SoCs), while the lower + * bits of device ID are used to indicate which subdevice is used + * within the SoC. + */ + return (pci_is_pcie(dev) && + (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) && + ((dev->device & 0xf800) == 0xa000)); +} + static int pci_quirk_cavium_acs(struct pci_dev *dev, u16 acs_flags) { /* - * Cavium devices matching this quirk do not perform peer-to-peer - * with other functions, allowing masking out these bits as if they - * were unimplemented in the ACS capability. + * Cavium root ports don't advertise an ACS capability. However, + * the RTL internally implements similar protection as if ACS had + * Request Redirection, Completion Redirection, Source Validation, + * and Upstream Forwarding features enabled. Assert that the + * hardware implements and enables equivalent ACS functionality for + * these flags. */ - acs_flags &= ~(PCI_ACS_SV | PCI_ACS_TB | PCI_ACS_RR | - PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_DT); + acs_flags &= ~(PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_SV | PCI_ACS_UF); - if (!((dev->device >= 0xa000) && (dev->device <= 0xa0ff))) + if (!pci_quirk_cavium_acs_match(dev)) return -ENOTTY; return acs_flags ? 0 : 1; @@ -4800,3 +4822,11 @@ static void quirk_no_ats(struct pci_dev *pdev) /* AMD Stoney platform GPU */ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x98e4, quirk_no_ats); #endif /* CONFIG_PCI_ATS */ + +/* Freescale PCIe doesn't support MSI in RC mode */ +static void quirk_fsl_no_msi(struct pci_dev *pdev) +{ + if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT) + pdev->no_msi = 1; +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, quirk_fsl_no_msi); diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c index 73a03d382590..2fa0dbde36b7 100644 --- a/drivers/pci/remove.c +++ b/drivers/pci/remove.c @@ -19,9 +19,9 @@ static void pci_stop_dev(struct pci_dev *dev) pci_pme_active(dev, false); if (dev->is_added) { + device_release_driver(&dev->dev); pci_proc_detach_device(dev); pci_remove_sysfs_dev_files(dev); - device_release_driver(&dev->dev); dev->is_added = 0; } diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c index b6edb187d160..1f5e6af96c83 100644 --- a/drivers/pci/rom.c +++ b/drivers/pci/rom.c @@ -147,12 +147,8 @@ void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size) return NULL; rom = ioremap(start, *size); - if (!rom) { - /* restore enable if ioremap fails */ - if (!(res->flags & IORESOURCE_ROM_ENABLE)) - pci_disable_rom(pdev); - return NULL; - } + if (!rom) + goto err_ioremap; /* * Try to find the true size of the ROM since sometimes the PCI window @@ -160,7 +156,18 @@ void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size) * True size is important if the ROM is going to be copied. */ *size = pci_get_rom_size(pdev, rom, *size); + if (!*size) + goto invalid_rom; + return rom; + +invalid_rom: + iounmap(rom); +err_ioremap: + /* restore enable if ioremap fails */ + if (!(res->flags & IORESOURCE_ROM_ENABLE)) + pci_disable_rom(pdev); + return NULL; } EXPORT_SYMBOL(pci_map_rom); diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 958da7db9033..b1ad466199ad 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -1518,13 +1518,16 @@ static void __pci_bridge_assign_resources(const struct pci_dev *bridge, break; } } + +#define PCI_RES_TYPE_MASK \ + (IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH |\ + IORESOURCE_MEM_64) + static void pci_bridge_release_resources(struct pci_bus *bus, unsigned long type) { struct pci_dev *dev = bus->self; struct resource *r; - unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM | - IORESOURCE_PREFETCH | IORESOURCE_MEM_64; unsigned old_flags = 0; struct resource *b_res; int idx = 1; @@ -1567,7 +1570,7 @@ static void pci_bridge_release_resources(struct pci_bus *bus, */ release_child_resources(r); if (!release_resource(r)) { - type = old_flags = r->flags & type_mask; + type = old_flags = r->flags & PCI_RES_TYPE_MASK; dev_printk(KERN_DEBUG, &dev->dev, "resource %d %pR released\n", PCI_BRIDGE_RESOURCES + idx, r); /* keep the old size */ @@ -1758,8 +1761,6 @@ void pci_assign_unassigned_root_bus_resources(struct pci_bus *bus) enum release_type rel_type = leaf_only; LIST_HEAD(fail_head); struct pci_dev_resource *fail_res; - unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM | - IORESOURCE_PREFETCH | IORESOURCE_MEM_64; int pci_try_num = 1; enum enable_type enable_local; @@ -1818,7 +1819,7 @@ again: */ list_for_each_entry(fail_res, &fail_head, list) pci_bus_release_bridge_resources(fail_res->dev->bus, - fail_res->flags & type_mask, + fail_res->flags & PCI_RES_TYPE_MASK, rel_type); /* restore size and flags */ @@ -1853,6 +1854,175 @@ void __init pci_assign_unassigned_resources(void) } } +static void extend_bridge_window(struct pci_dev *bridge, struct resource *res, + struct list_head *add_list, resource_size_t available) +{ + struct pci_dev_resource *dev_res; + + if (res->parent) + return; + + if (resource_size(res) >= available) + return; + + dev_res = res_to_dev_res(add_list, res); + if (!dev_res) + return; + + /* Is there room to extend the window? */ + if (available - resource_size(res) <= dev_res->add_size) + return; + + dev_res->add_size = available - resource_size(res); + dev_dbg(&bridge->dev, "bridge window %pR extended by %pa\n", res, + &dev_res->add_size); +} + +static void pci_bus_distribute_available_resources(struct pci_bus *bus, + struct list_head *add_list, resource_size_t available_io, + resource_size_t available_mmio, resource_size_t available_mmio_pref) +{ + resource_size_t remaining_io, remaining_mmio, remaining_mmio_pref; + unsigned int normal_bridges = 0, hotplug_bridges = 0; + struct resource *io_res, *mmio_res, *mmio_pref_res; + struct pci_dev *dev, *bridge = bus->self; + + io_res = &bridge->resource[PCI_BRIDGE_RESOURCES + 0]; + mmio_res = &bridge->resource[PCI_BRIDGE_RESOURCES + 1]; + mmio_pref_res = &bridge->resource[PCI_BRIDGE_RESOURCES + 2]; + + /* + * Update additional resource list (add_list) to fill all the + * extra resource space available for this port except the space + * calculated in __pci_bus_size_bridges() which covers all the + * devices currently connected to the port and below. + */ + extend_bridge_window(bridge, io_res, add_list, available_io); + extend_bridge_window(bridge, mmio_res, add_list, available_mmio); + extend_bridge_window(bridge, mmio_pref_res, add_list, + available_mmio_pref); + + /* + * Calculate the total amount of extra resource space we can + * pass to bridges below this one. This is basically the + * extra space reduced by the minimal required space for the + * non-hotplug bridges. + */ + remaining_io = available_io; + remaining_mmio = available_mmio; + remaining_mmio_pref = available_mmio_pref; + + /* + * Calculate how many hotplug bridges and normal bridges there + * are on this bus. We will distribute the additional available + * resources between hotplug bridges. + */ + for_each_pci_bridge(dev, bus) { + if (dev->is_hotplug_bridge) + hotplug_bridges++; + else + normal_bridges++; + } + + for_each_pci_bridge(dev, bus) { + const struct resource *res; + + if (dev->is_hotplug_bridge) + continue; + + /* + * Reduce the available resource space by what the + * bridge and devices below it occupy. + */ + res = &dev->resource[PCI_BRIDGE_RESOURCES + 0]; + if (!res->parent && available_io > resource_size(res)) + remaining_io -= resource_size(res); + + res = &dev->resource[PCI_BRIDGE_RESOURCES + 1]; + if (!res->parent && available_mmio > resource_size(res)) + remaining_mmio -= resource_size(res); + + res = &dev->resource[PCI_BRIDGE_RESOURCES + 2]; + if (!res->parent && available_mmio_pref > resource_size(res)) + remaining_mmio_pref -= resource_size(res); + } + + /* + * Go over devices on this bus and distribute the remaining + * resource space between hotplug bridges. + */ + for_each_pci_bridge(dev, bus) { + struct pci_bus *b; + + b = dev->subordinate; + if (!b) + continue; + + if (!hotplug_bridges && normal_bridges == 1) { + /* + * There is only one bridge on the bus (upstream + * port) so it gets all available resources + * which it can then distribute to the possible + * hotplug bridges below. + */ + pci_bus_distribute_available_resources(b, add_list, + available_io, available_mmio, + available_mmio_pref); + } else if (dev->is_hotplug_bridge) { + resource_size_t align, io, mmio, mmio_pref; + + /* + * Distribute available extra resources equally + * between hotplug-capable downstream ports + * taking alignment into account. + * + * Here hotplug_bridges is always != 0. + */ + align = pci_resource_alignment(bridge, io_res); + io = div64_ul(available_io, hotplug_bridges); + io = min(ALIGN(io, align), remaining_io); + remaining_io -= io; + + align = pci_resource_alignment(bridge, mmio_res); + mmio = div64_ul(available_mmio, hotplug_bridges); + mmio = min(ALIGN(mmio, align), remaining_mmio); + remaining_mmio -= mmio; + + align = pci_resource_alignment(bridge, mmio_pref_res); + mmio_pref = div64_ul(available_mmio_pref, + hotplug_bridges); + mmio_pref = min(ALIGN(mmio_pref, align), + remaining_mmio_pref); + remaining_mmio_pref -= mmio_pref; + + pci_bus_distribute_available_resources(b, add_list, io, + mmio, mmio_pref); + } + } +} + +static void +pci_bridge_distribute_available_resources(struct pci_dev *bridge, + struct list_head *add_list) +{ + resource_size_t available_io, available_mmio, available_mmio_pref; + const struct resource *res; + + if (!bridge->is_hotplug_bridge) + return; + + /* Take the initial extra resources from the hotplug port */ + res = &bridge->resource[PCI_BRIDGE_RESOURCES + 0]; + available_io = resource_size(res); + res = &bridge->resource[PCI_BRIDGE_RESOURCES + 1]; + available_mmio = resource_size(res); + res = &bridge->resource[PCI_BRIDGE_RESOURCES + 2]; + available_mmio_pref = resource_size(res); + + pci_bus_distribute_available_resources(bridge->subordinate, + add_list, available_io, available_mmio, available_mmio_pref); +} + void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge) { struct pci_bus *parent = bridge->subordinate; @@ -1862,11 +2032,17 @@ void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge) LIST_HEAD(fail_head); struct pci_dev_resource *fail_res; int retval; - unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM | - IORESOURCE_PREFETCH | IORESOURCE_MEM_64; again: __pci_bus_size_bridges(parent, &add_list); + + /* + * Distribute remaining resources (if any) equally between + * hotplug bridges below. This makes it possible to extend the + * hierarchy later without running out of resources. + */ + pci_bridge_distribute_available_resources(bridge, &add_list); + __pci_bridge_assign_resources(bridge, &add_list, &fail_head); BUG_ON(!list_empty(&add_list)); tried_times++; @@ -1889,7 +2065,7 @@ again: */ list_for_each_entry(fail_res, &fail_head, list) pci_bus_release_bridge_resources(fail_res->dev->bus, - fail_res->flags & type_mask, + fail_res->flags & PCI_RES_TYPE_MASK, whole_subtree); /* restore size and flags */ @@ -1914,6 +2090,104 @@ enable_all: } EXPORT_SYMBOL_GPL(pci_assign_unassigned_bridge_resources); +int pci_reassign_bridge_resources(struct pci_dev *bridge, unsigned long type) +{ + struct pci_dev_resource *dev_res; + struct pci_dev *next; + LIST_HEAD(saved); + LIST_HEAD(added); + LIST_HEAD(failed); + unsigned int i; + int ret; + + /* Walk to the root hub, releasing bridge BARs when possible */ + next = bridge; + do { + bridge = next; + for (i = PCI_BRIDGE_RESOURCES; i < PCI_BRIDGE_RESOURCE_END; + i++) { + struct resource *res = &bridge->resource[i]; + + if ((res->flags ^ type) & PCI_RES_TYPE_MASK) + continue; + + /* Ignore BARs which are still in use */ + if (res->child) + continue; + + ret = add_to_list(&saved, bridge, res, 0, 0); + if (ret) + goto cleanup; + + dev_info(&bridge->dev, "BAR %d: releasing %pR\n", + i, res); + + if (res->parent) + release_resource(res); + res->start = 0; + res->end = 0; + break; + } + if (i == PCI_BRIDGE_RESOURCE_END) + break; + + next = bridge->bus ? bridge->bus->self : NULL; + } while (next); + + if (list_empty(&saved)) + return -ENOENT; + + __pci_bus_size_bridges(bridge->subordinate, &added); + __pci_bridge_assign_resources(bridge, &added, &failed); + BUG_ON(!list_empty(&added)); + + if (!list_empty(&failed)) { + ret = -ENOSPC; + goto cleanup; + } + + list_for_each_entry(dev_res, &saved, list) { + /* Skip the bridge we just assigned resources for. */ + if (bridge == dev_res->dev) + continue; + + bridge = dev_res->dev; + pci_setup_bridge(bridge->subordinate); + } + + free_list(&saved); + return 0; + +cleanup: + /* restore size and flags */ + list_for_each_entry(dev_res, &failed, list) { + struct resource *res = dev_res->res; + + res->start = dev_res->start; + res->end = dev_res->end; + res->flags = dev_res->flags; + } + free_list(&failed); + + /* Revert to the old configuration */ + list_for_each_entry(dev_res, &saved, list) { + struct resource *res = dev_res->res; + + bridge = dev_res->dev; + i = res - bridge->resource; + + res->start = dev_res->start; + res->end = dev_res->end; + res->flags = dev_res->flags; + + pci_claim_resource(bridge, i); + pci_setup_bridge(bridge->subordinate); + } + free_list(&saved); + + return ret; +} + void pci_assign_unassigned_bus_resources(struct pci_bus *bus) { struct pci_dev *dev; @@ -1921,10 +2195,9 @@ void pci_assign_unassigned_bus_resources(struct pci_bus *bus) want additional resources */ down_read(&pci_bus_sem); - list_for_each_entry(dev, &bus->devices, bus_list) - if (pci_is_bridge(dev) && pci_has_subordinate(dev)) - __pci_bus_size_bridges(dev->subordinate, - &add_list); + for_each_pci_bridge(dev, bus) + if (pci_has_subordinate(dev)) + __pci_bus_size_bridges(dev->subordinate, &add_list); up_read(&pci_bus_sem); __pci_bus_assign_resources(bus, &add_list, NULL); BUG_ON(!list_empty(&add_list)); diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c index c039149cacb0..e815111f3f81 100644 --- a/drivers/pci/setup-res.c +++ b/drivers/pci/setup-res.c @@ -397,6 +397,64 @@ int pci_reassign_resource(struct pci_dev *dev, int resno, resource_size_t addsiz return 0; } +void pci_release_resource(struct pci_dev *dev, int resno) +{ + struct resource *res = dev->resource + resno; + + dev_info(&dev->dev, "BAR %d: releasing %pR\n", resno, res); + release_resource(res); + res->end = resource_size(res) - 1; + res->start = 0; + res->flags |= IORESOURCE_UNSET; +} +EXPORT_SYMBOL(pci_release_resource); + +int pci_resize_resource(struct pci_dev *dev, int resno, int size) +{ + struct resource *res = dev->resource + resno; + int old, ret; + u32 sizes; + u16 cmd; + + /* Make sure the resource isn't assigned before resizing it. */ + if (!(res->flags & IORESOURCE_UNSET)) + return -EBUSY; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + if (cmd & PCI_COMMAND_MEMORY) + return -EBUSY; + + sizes = pci_rebar_get_possible_sizes(dev, resno); + if (!sizes) + return -ENOTSUPP; + + if (!(sizes & BIT(size))) + return -EINVAL; + + old = pci_rebar_get_current_size(dev, resno); + if (old < 0) + return old; + + ret = pci_rebar_set_size(dev, resno, size); + if (ret) + return ret; + + res->end = res->start + pci_rebar_size_to_bytes(size) - 1; + + /* Check if the new config works by trying to assign everything. */ + ret = pci_reassign_bridge_resources(dev->bus->self, res->flags); + if (ret) + goto error_resize; + + return 0; + +error_resize: + pci_rebar_set_size(dev, resno, old); + res->end = res->start + pci_rebar_size_to_bytes(old) - 1; + return ret; +} +EXPORT_SYMBOL(pci_resize_resource); + int pci_enable_resources(struct pci_dev *dev, int mask) { u16 cmd, old_cmd; diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c index af81b2dec42e..da45dbea20ce 100644 --- a/drivers/pci/switch/switchtec.c +++ b/drivers/pci/switch/switchtec.c @@ -943,7 +943,7 @@ static u32 __iomem *pff_ev_reg(struct switchtec_dev *stdev, #define EV_PAR(i, r)[i] = {offsetof(struct part_cfg_regs, r), part_ev_reg} #define EV_PFF(i, r)[i] = {offsetof(struct pff_csr_regs, r), pff_ev_reg} -const struct event_reg { +static const struct event_reg { size_t offset; u32 __iomem *(*map_reg)(struct switchtec_dev *stdev, size_t offset, int index); |