summaryrefslogtreecommitdiffstats
path: root/drivers/pci
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci')
-rw-r--r--drivers/pci/Kconfig11
-rw-r--r--drivers/pci/Makefile5
-rw-r--r--drivers/pci/bus.c56
-rw-r--r--drivers/pci/hotplug/acpiphp_core.c2
-rw-r--r--drivers/pci/hotplug/acpiphp_glue.c6
-rw-r--r--drivers/pci/hotplug/cpcihp_generic.c1
-rw-r--r--drivers/pci/hotplug/cpqphp.h2
-rw-r--r--drivers/pci/hotplug/cpqphp_core.c57
-rw-r--r--drivers/pci/hotplug/cpqphp_ctrl.c27
-rw-r--r--drivers/pci/hotplug/ibmphp_core.c106
-rw-r--r--drivers/pci/hotplug/ibmphp_ebda.c13
-rw-r--r--drivers/pci/hotplug/ibmphp_hpc.c1
-rw-r--r--drivers/pci/hotplug/pci_hotplug_core.c132
-rw-r--r--drivers/pci/hotplug/pciehp_core.c25
-rw-r--r--drivers/pci/hotplug/pciehp_ctrl.c1
-rw-r--r--drivers/pci/hotplug/pciehp_hpc.c72
-rw-r--r--drivers/pci/hotplug/pciehp_pci.c23
-rw-r--r--drivers/pci/hotplug/rpaphp_core.c24
-rw-r--r--drivers/pci/hotplug/shpchp.h2
-rw-r--r--drivers/pci/hotplug/shpchp_core.c35
-rw-r--r--drivers/pci/hotplug/shpchp_ctrl.c14
-rw-r--r--drivers/pci/hotplug/shpchp_hpc.c149
-rw-r--r--drivers/pci/hotplug/shpchp_sysfs.c9
-rw-r--r--drivers/pci/legacy.c34
-rw-r--r--drivers/pci/pci-acpi.c211
-rw-r--r--drivers/pci/pci-driver.c160
-rw-r--r--drivers/pci/pci.c183
-rw-r--r--drivers/pci/pci.h16
-rw-r--r--drivers/pci/pcie/Kconfig4
-rw-r--r--drivers/pci/pcie/Makefile2
-rw-r--r--drivers/pci/pcie/pme/Makefile8
-rw-r--r--drivers/pci/pcie/pme/pcie_pme.c505
-rw-r--r--drivers/pci/pcie/pme/pcie_pme.h28
-rw-r--r--drivers/pci/pcie/pme/pcie_pme_acpi.c54
-rw-r--r--drivers/pci/pcie/portdrv.h17
-rw-r--r--drivers/pci/pcie/portdrv_core.c13
-rw-r--r--drivers/pci/pcie/portdrv_pci.c27
-rw-r--r--drivers/pci/probe.c293
-rw-r--r--drivers/pci/quirks.c14
-rw-r--r--drivers/pci/setup-bus.c506
-rw-r--r--drivers/pci/slot.c55
41 files changed, 2213 insertions, 690 deletions
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index b1ecefa2a23d..7858a117e80b 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -21,17 +21,6 @@ config PCI_MSI
If you don't know what to do here, say N.
-config PCI_LEGACY
- bool "Enable deprecated pci_find_* API"
- depends on PCI
- default y
- help
- Say Y here if you want to include support for the deprecated
- pci_find_device() API. Most drivers have been converted over
- to using the proper hotplug APIs, so this option serves to
- include/exclude only a few drivers that are still using this
- API.
-
config PCI_DEBUG
bool "PCI Debugging"
depends on PCI && DEBUG_KERNEL
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index b2f6d777a084..3d102dd87c9f 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -2,14 +2,13 @@
# Makefile for the PCI bus specific drivers.
#
-obj-y += access.o bus.o probe.o remove.o pci.o quirks.o \
+obj-y += access.o bus.o probe.o remove.o pci.o \
pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \
irq.o vpd.o
obj-$(CONFIG_PROC_FS) += proc.o
obj-$(CONFIG_SYSFS) += slot.o
-obj-$(CONFIG_PCI_LEGACY) += legacy.o
-CFLAGS_legacy.o += -Wno-deprecated-declarations
+obj-$(CONFIG_PCI_QUIRKS) += quirks.o
# Build PCI Express stuff if needed
obj-$(CONFIG_PCIEPORTBUS) += pcie/
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index cef28a79103f..712250f5874a 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -17,6 +17,52 @@
#include "pci.h"
+void pci_bus_add_resource(struct pci_bus *bus, struct resource *res,
+ unsigned int flags)
+{
+ struct pci_bus_resource *bus_res;
+
+ bus_res = kzalloc(sizeof(struct pci_bus_resource), GFP_KERNEL);
+ if (!bus_res) {
+ dev_err(&bus->dev, "can't add %pR resource\n", res);
+ return;
+ }
+
+ bus_res->res = res;
+ bus_res->flags = flags;
+ list_add_tail(&bus_res->list, &bus->resources);
+}
+
+struct resource *pci_bus_resource_n(const struct pci_bus *bus, int n)
+{
+ struct pci_bus_resource *bus_res;
+
+ if (n < PCI_BRIDGE_RESOURCE_NUM)
+ return bus->resource[n];
+
+ n -= PCI_BRIDGE_RESOURCE_NUM;
+ list_for_each_entry(bus_res, &bus->resources, list) {
+ if (n-- == 0)
+ return bus_res->res;
+ }
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(pci_bus_resource_n);
+
+void pci_bus_remove_resources(struct pci_bus *bus)
+{
+ struct pci_bus_resource *bus_res, *tmp;
+ int i;
+
+ for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++)
+ bus->resource[i] = 0;
+
+ list_for_each_entry_safe(bus_res, tmp, &bus->resources, list) {
+ list_del(&bus_res->list);
+ kfree(bus_res);
+ }
+}
+
/**
* pci_bus_alloc_resource - allocate a resource from a parent bus
* @bus: PCI bus
@@ -36,11 +82,14 @@ int
pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
resource_size_t size, resource_size_t align,
resource_size_t min, unsigned int type_mask,
- void (*alignf)(void *, struct resource *, resource_size_t,
- resource_size_t),
+ resource_size_t (*alignf)(void *,
+ const struct resource *,
+ resource_size_t,
+ resource_size_t),
void *alignf_data)
{
int i, ret = -ENOMEM;
+ struct resource *r;
resource_size_t max = -1;
type_mask |= IORESOURCE_IO | IORESOURCE_MEM;
@@ -49,8 +98,7 @@ pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
if (!(res->flags & IORESOURCE_MEM_64))
max = PCIBIOS_MAX_MEM_32;
- for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
- struct resource *r = bus->resource[i];
+ pci_bus_for_each_resource(bus, r, i) {
if (!r)
continue;
diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
index 4dd7114964ac..efa9f2de51c1 100644
--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -332,8 +332,6 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot)
slot->hotplug_slot->info->attention_status = 0;
slot->hotplug_slot->info->latch_status = acpiphp_get_latch_status(slot->acpi_slot);
slot->hotplug_slot->info->adapter_status = acpiphp_get_adapter_status(slot->acpi_slot);
- slot->hotplug_slot->info->max_bus_speed = PCI_SPEED_UNKNOWN;
- slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN;
acpiphp_slot->slot = slot;
snprintf(name, SLOT_NAME_SIZE, "%llu", slot->acpi_slot->sun);
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 8e952fdab764..cb2fd01eddae 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -720,12 +720,6 @@ static int acpiphp_bus_add(struct acpiphp_func *func)
-ret_val);
goto acpiphp_bus_add_out;
}
- /*
- * try to start anyway. We could have failed to add
- * simply because this bus had previously been added
- * on another add. Don't bother with the return value
- * we just keep going.
- */
ret_val = acpi_bus_start(device);
acpiphp_bus_add_out:
diff --git a/drivers/pci/hotplug/cpcihp_generic.c b/drivers/pci/hotplug/cpcihp_generic.c
index 148fb463b81c..fb3f84661bdc 100644
--- a/drivers/pci/hotplug/cpcihp_generic.c
+++ b/drivers/pci/hotplug/cpcihp_generic.c
@@ -162,6 +162,7 @@ static int __init cpcihp_generic_init(void)
dev = pci_get_slot(bus, PCI_DEVFN(bridge_slot, 0));
if(!dev || dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
err("Invalid bridge device %s", bridge);
+ pci_dev_put(dev);
return -EINVAL;
}
bus = dev->subordinate;
diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h
index 9c6a9fd26812..d8ffc7366801 100644
--- a/drivers/pci/hotplug/cpqphp.h
+++ b/drivers/pci/hotplug/cpqphp.h
@@ -310,8 +310,6 @@ struct controller {
u8 first_slot;
u8 add_support;
u8 push_flag;
- enum pci_bus_speed speed;
- enum pci_bus_speed speed_capability;
u8 push_button; /* 0 = no pushbutton, 1 = pushbutton present */
u8 slot_switch_type; /* 0 = no switch, 1 = switch present */
u8 defeature_PHP; /* 0 = PHP not supported, 1 = PHP supported */
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index 075b4f4b6e0d..f184d1d2ecbe 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -583,30 +583,6 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
return 0;
}
-static int get_max_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
- struct slot *slot = hotplug_slot->private;
- struct controller *ctrl = slot->ctrl;
-
- dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
-
- *value = ctrl->speed_capability;
-
- return 0;
-}
-
-static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
- struct slot *slot = hotplug_slot->private;
- struct controller *ctrl = slot->ctrl;
-
- dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
-
- *value = ctrl->speed;
-
- return 0;
-}
-
static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = {
.set_attention_status = set_attention_status,
.enable_slot = process_SI,
@@ -616,8 +592,6 @@ static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = {
.get_attention_status = get_attention_status,
.get_latch_status = get_latch_status,
.get_adapter_status = get_adapter_status,
- .get_max_bus_speed = get_max_bus_speed,
- .get_cur_bus_speed = get_cur_bus_speed,
};
#define SLOT_NAME_SIZE 10
@@ -629,6 +603,7 @@ static int ctrl_slot_setup(struct controller *ctrl,
struct slot *slot;
struct hotplug_slot *hotplug_slot;
struct hotplug_slot_info *hotplug_slot_info;
+ struct pci_bus *bus = ctrl->pci_bus;
u8 number_of_slots;
u8 slot_device;
u8 slot_number;
@@ -694,7 +669,7 @@ static int ctrl_slot_setup(struct controller *ctrl,
slot->capabilities |= PCISLOT_64_BIT_SUPPORTED;
if (is_slot66mhz(slot))
slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED;
- if (ctrl->speed == PCI_SPEED_66MHz)
+ if (bus->cur_bus_speed == PCI_SPEED_66MHz)
slot->capabilities |= PCISLOT_66_MHZ_OPERATION;
ctrl_slot =
@@ -844,6 +819,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
u32 rc;
struct controller *ctrl;
struct pci_func *func;
+ struct pci_bus *bus;
int err;
err = pci_enable_device(pdev);
@@ -852,6 +828,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
pci_name(pdev), err);
return err;
}
+ bus = pdev->subordinate;
/* Need to read VID early b/c it's used to differentiate CPQ and INTC
* discovery
@@ -929,22 +906,22 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
pci_read_config_byte(pdev, 0x41, &bus_cap);
if (bus_cap & 0x80) {
dbg("bus max supports 133MHz PCI-X\n");
- ctrl->speed_capability = PCI_SPEED_133MHz_PCIX;
+ bus->max_bus_speed = PCI_SPEED_133MHz_PCIX;
break;
}
if (bus_cap & 0x40) {
dbg("bus max supports 100MHz PCI-X\n");
- ctrl->speed_capability = PCI_SPEED_100MHz_PCIX;
+ bus->max_bus_speed = PCI_SPEED_100MHz_PCIX;
break;
}
if (bus_cap & 20) {
dbg("bus max supports 66MHz PCI-X\n");
- ctrl->speed_capability = PCI_SPEED_66MHz_PCIX;
+ bus->max_bus_speed = PCI_SPEED_66MHz_PCIX;
break;
}
if (bus_cap & 10) {
dbg("bus max supports 66MHz PCI\n");
- ctrl->speed_capability = PCI_SPEED_66MHz;
+ bus->max_bus_speed = PCI_SPEED_66MHz;
break;
}
@@ -955,7 +932,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
case PCI_SUB_HPC_ID:
/* Original 6500/7000 implementation */
ctrl->slot_switch_type = 1;
- ctrl->speed_capability = PCI_SPEED_33MHz;
+ bus->max_bus_speed = PCI_SPEED_33MHz;
ctrl->push_button = 0;
ctrl->pci_config_space = 1;
ctrl->defeature_PHP = 1;
@@ -966,7 +943,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/* First Pushbutton implementation */
ctrl->push_flag = 1;
ctrl->slot_switch_type = 1;
- ctrl->speed_capability = PCI_SPEED_33MHz;
+ bus->max_bus_speed = PCI_SPEED_33MHz;
ctrl->push_button = 1;
ctrl->pci_config_space = 1;
ctrl->defeature_PHP = 1;
@@ -976,7 +953,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
case PCI_SUB_HPC_ID_INTC:
/* Third party (6500/7000) */
ctrl->slot_switch_type = 1;
- ctrl->speed_capability = PCI_SPEED_33MHz;
+ bus->max_bus_speed = PCI_SPEED_33MHz;
ctrl->push_button = 0;
ctrl->pci_config_space = 1;
ctrl->defeature_PHP = 1;
@@ -987,7 +964,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/* First 66 Mhz implementation */
ctrl->push_flag = 1;
ctrl->slot_switch_type = 1;
- ctrl->speed_capability = PCI_SPEED_66MHz;
+ bus->max_bus_speed = PCI_SPEED_66MHz;
ctrl->push_button = 1;
ctrl->pci_config_space = 1;
ctrl->defeature_PHP = 1;
@@ -998,7 +975,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/* First PCI-X implementation, 100MHz */
ctrl->push_flag = 1;
ctrl->slot_switch_type = 1;
- ctrl->speed_capability = PCI_SPEED_100MHz_PCIX;
+ bus->max_bus_speed = PCI_SPEED_100MHz_PCIX;
ctrl->push_button = 1;
ctrl->pci_config_space = 1;
ctrl->defeature_PHP = 1;
@@ -1015,9 +992,9 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
case PCI_VENDOR_ID_INTEL:
/* Check for speed capability (0=33, 1=66) */
if (subsystem_deviceid & 0x0001)
- ctrl->speed_capability = PCI_SPEED_66MHz;
+ bus->max_bus_speed = PCI_SPEED_66MHz;
else
- ctrl->speed_capability = PCI_SPEED_33MHz;
+ bus->max_bus_speed = PCI_SPEED_33MHz;
/* Check for push button */
if (subsystem_deviceid & 0x0002)
@@ -1079,7 +1056,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
pdev->bus->number);
dbg("Hotplug controller capabilities:\n");
- dbg(" speed_capability %d\n", ctrl->speed_capability);
+ dbg(" speed_capability %d\n", bus->max_bus_speed);
dbg(" slot_switch_type %s\n", ctrl->slot_switch_type ?
"switch present" : "no switch");
dbg(" defeature_PHP %s\n", ctrl->defeature_PHP ?
@@ -1142,7 +1119,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
}
/* Check for 66Mhz operation */
- ctrl->speed = get_controller_speed(ctrl);
+ bus->cur_bus_speed = get_controller_speed(ctrl);
/********************************************************
diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c
index 0ff689afa757..e43908d9b5df 100644
--- a/drivers/pci/hotplug/cpqphp_ctrl.c
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -1130,12 +1130,13 @@ static int is_bridge(struct pci_func * func)
static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_slot)
{
struct slot *slot;
+ struct pci_bus *bus = ctrl->pci_bus;
u8 reg;
u8 slot_power = readb(ctrl->hpc_reg + SLOT_POWER);
u16 reg16;
u32 leds = readl(ctrl->hpc_reg + LED_CONTROL);
- if (ctrl->speed == adapter_speed)
+ if (bus->cur_bus_speed == adapter_speed)
return 0;
/* We don't allow freq/mode changes if we find another adapter running
@@ -1152,7 +1153,7 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
* lower speed/mode, we allow the new adapter to function at
* this rate if supported
*/
- if (ctrl->speed < adapter_speed)
+ if (bus->cur_bus_speed < adapter_speed)
return 0;
return 1;
@@ -1161,20 +1162,20 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
/* If the controller doesn't support freq/mode changes and the
* controller is running at a higher mode, we bail
*/
- if ((ctrl->speed > adapter_speed) && (!ctrl->pcix_speed_capability))
+ if ((bus->cur_bus_speed > adapter_speed) && (!ctrl->pcix_speed_capability))
return 1;
/* But we allow the adapter to run at a lower rate if possible */
- if ((ctrl->speed < adapter_speed) && (!ctrl->pcix_speed_capability))
+ if ((bus->cur_bus_speed < adapter_speed) && (!ctrl->pcix_speed_capability))
return 0;
/* We try to set the max speed supported by both the adapter and
* controller
*/
- if (ctrl->speed_capability < adapter_speed) {
- if (ctrl->speed == ctrl->speed_capability)
+ if (bus->max_bus_speed < adapter_speed) {
+ if (bus->cur_bus_speed == bus->max_bus_speed)
return 0;
- adapter_speed = ctrl->speed_capability;
+ adapter_speed = bus->max_bus_speed;
}
writel(0x0L, ctrl->hpc_reg + LED_CONTROL);
@@ -1229,8 +1230,8 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
pci_write_config_byte(ctrl->pci_dev, 0x43, reg);
/* Only if mode change...*/
- if (((ctrl->speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) ||
- ((ctrl->speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz)))
+ if (((bus->cur_bus_speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) ||
+ ((bus->cur_bus_speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz)))
set_SOGO(ctrl);
wait_for_ctrl_irq(ctrl);
@@ -1243,7 +1244,7 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
set_SOGO(ctrl);
wait_for_ctrl_irq(ctrl);
- ctrl->speed = adapter_speed;
+ bus->cur_bus_speed = adapter_speed;
slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
info("Successfully changed frequency/mode for adapter in slot %d\n",
@@ -1269,6 +1270,7 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
*/
static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
{
+ struct pci_bus *bus = ctrl->pci_bus;
u8 hp_slot;
u8 temp_byte;
u8 adapter_speed;
@@ -1309,7 +1311,7 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
wait_for_ctrl_irq (ctrl);
adapter_speed = get_adapter_speed(ctrl, hp_slot);
- if (ctrl->speed != adapter_speed)
+ if (bus->cur_bus_speed != adapter_speed)
if (set_controller_speed(ctrl, adapter_speed, hp_slot))
rc = WRONG_BUS_FREQUENCY;
@@ -1426,6 +1428,7 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl)
u32 temp_register = 0xFFFFFFFF;
u32 rc = 0;
struct pci_func *new_slot = NULL;
+ struct pci_bus *bus = ctrl->pci_bus;
struct slot *p_slot;
struct resource_lists res_lists;
@@ -1456,7 +1459,7 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl)
wait_for_ctrl_irq (ctrl);
adapter_speed = get_adapter_speed(ctrl, hp_slot);
- if (ctrl->speed != adapter_speed)
+ if (bus->cur_bus_speed != adapter_speed)
if (set_controller_speed(ctrl, adapter_speed, hp_slot))
rc = WRONG_BUS_FREQUENCY;
diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c
index 7485ffda950c..d934dd4fa873 100644
--- a/drivers/pci/hotplug/ibmphp_core.c
+++ b/drivers/pci/hotplug/ibmphp_core.c
@@ -395,89 +395,40 @@ static int get_adapter_present(struct hotplug_slot *hotplug_slot, u8 * value)
return rc;
}
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
+static int get_max_bus_speed(struct slot *slot)
{
- int rc = -ENODEV;
- struct slot *pslot;
+ int rc;
u8 mode = 0;
+ enum pci_bus_speed speed;
+ struct pci_bus *bus = slot->hotplug_slot->pci_slot->bus;
- debug("%s - Entry hotplug_slot[%p] pvalue[%p]\n", __func__,
- hotplug_slot, value);
+ debug("%s - Entry slot[%p]\n", __func__, slot);
ibmphp_lock_operations();
-
- if (hotplug_slot) {
- pslot = hotplug_slot->private;
- if (pslot) {
- rc = 0;
- mode = pslot->supported_bus_mode;
- *value = pslot->supported_speed;
- switch (*value) {
- case BUS_SPEED_33:
- break;
- case BUS_SPEED_66:
- if (mode == BUS_MODE_PCIX)
- *value += 0x01;
- break;
- case BUS_SPEED_100:
- case BUS_SPEED_133:
- *value = pslot->supported_speed + 0x01;
- break;
- default:
- /* Note (will need to change): there would be soon 256, 512 also */
- rc = -ENODEV;
- }
- }
- }
-
+ mode = slot->supported_bus_mode;
+ speed = slot->supported_speed;
ibmphp_unlock_operations();
- debug("%s - Exit rc[%d] value[%x]\n", __func__, rc, *value);
- return rc;
-}
-static int get_cur_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
- int rc = -ENODEV;
- struct slot *pslot;
- u8 mode = 0;
-
- debug("%s - Entry hotplug_slot[%p] pvalue[%p]\n", __func__,
- hotplug_slot, value);
-
- ibmphp_lock_operations();
-
- if (hotplug_slot) {
- pslot = hotplug_slot->private;
- if (pslot) {
- rc = get_cur_bus_info(&pslot);
- if (!rc) {
- mode = pslot->bus_on->current_bus_mode;
- *value = pslot->bus_on->current_speed;
- switch (*value) {
- case BUS_SPEED_33:
- break;
- case BUS_SPEED_66:
- if (mode == BUS_MODE_PCIX)
- *value += 0x01;
- else if (mode == BUS_MODE_PCI)
- ;
- else
- *value = PCI_SPEED_UNKNOWN;
- break;
- case BUS_SPEED_100:
- case BUS_SPEED_133:
- *value += 0x01;
- break;
- default:
- /* Note of change: there would also be 256, 512 soon */
- rc = -ENODEV;
- }
- }
- }
+ switch (speed) {
+ case BUS_SPEED_33:
+ break;
+ case BUS_SPEED_66:
+ if (mode == BUS_MODE_PCIX)
+ speed += 0x01;
+ break;
+ case BUS_SPEED_100:
+ case BUS_SPEED_133:
+ speed += 0x01;
+ break;
+ default:
+ /* Note (will need to change): there would be soon 256, 512 also */
+ rc = -ENODEV;
}
- ibmphp_unlock_operations();
- debug("%s - Exit rc[%d] value[%x]\n", __func__, rc, *value);
+ if (!rc)
+ bus->max_bus_speed = speed;
+
+ debug("%s - Exit rc[%d] speed[%x]\n", __func__, rc, speed);
return rc;
}
@@ -572,6 +523,7 @@ static int __init init_ops(void)
if (slot_cur->bus_on->current_speed == 0xFF)
if (get_cur_bus_info(&slot_cur))
return -1;
+ get_max_bus_speed(slot_cur);
if (slot_cur->ctrl->options == 0xFF)
if (get_hpc_options(slot_cur, &slot_cur->ctrl->options))
@@ -655,6 +607,7 @@ static int validate(struct slot *slot_cur, int opn)
int ibmphp_update_slot_info(struct slot *slot_cur)
{
struct hotplug_slot_info *info;
+ struct pci_bus *bus = slot_cur->hotplug_slot->pci_slot->bus;
int rc;
u8 bus_speed;
u8 mode;
@@ -700,8 +653,7 @@ int ibmphp_update_slot_info(struct slot *slot_cur)
bus_speed = PCI_SPEED_UNKNOWN;
}
- info->cur_bus_speed = bus_speed;
- info->max_bus_speed = slot_cur->hotplug_slot->info->max_bus_speed;
+ bus->cur_bus_speed = bus_speed;
// To do: bus_names
rc = pci_hp_change_slot_info(slot_cur->hotplug_slot, info);
@@ -1326,8 +1278,6 @@ struct hotplug_slot_ops ibmphp_hotplug_slot_ops = {
.get_attention_status = get_attention_status,
.get_latch_status = get_latch_status,
.get_adapter_status = get_adapter_present,
- .get_max_bus_speed = get_max_bus_speed,
- .get_cur_bus_speed = get_cur_bus_speed,
/* .get_max_adapter_speed = get_max_adapter_speed,
.get_bus_name_status = get_bus_name,
*/
diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c
index c1abac8ab5c3..5becbdee4027 100644
--- a/drivers/pci/hotplug/ibmphp_ebda.c
+++ b/drivers/pci/hotplug/ibmphp_ebda.c
@@ -245,7 +245,7 @@ static void __init print_ebda_hpc (void)
int __init ibmphp_access_ebda (void)
{
- u8 format, num_ctlrs, rio_complete, hs_complete;
+ u8 format, num_ctlrs, rio_complete, hs_complete, ebda_sz;
u16 ebda_seg, num_entries, next_offset, offset, blk_id, sub_addr, re, rc_id, re_id, base;
int rc = 0;
@@ -260,7 +260,16 @@ int __init ibmphp_access_ebda (void)
iounmap (io_mem);
debug ("returned ebda segment: %x\n", ebda_seg);
- io_mem = ioremap(ebda_seg<<4, 1024);
+ io_mem = ioremap(ebda_seg<<4, 1);
+ if (!io_mem)
+ return -ENOMEM;
+ ebda_sz = readb(io_mem);
+ iounmap(io_mem);
+ debug("ebda size: %d(KiB)\n", ebda_sz);
+ if (ebda_sz == 0)
+ return -ENOMEM;
+
+ io_mem = ioremap(ebda_seg<<4, (ebda_sz * 1024));
if (!io_mem )
return -ENOMEM;
next_offset = 0x180;
diff --git a/drivers/pci/hotplug/ibmphp_hpc.c b/drivers/pci/hotplug/ibmphp_hpc.c
index c7084f0eca5a..1aaf3f32d3cd 100644
--- a/drivers/pci/hotplug/ibmphp_hpc.c
+++ b/drivers/pci/hotplug/ibmphp_hpc.c
@@ -35,6 +35,7 @@
#include <linux/init.h>
#include <linux/mutex.h>
#include <linux/sched.h>
+#include <linux/semaphore.h>
#include <linux/kthread.h>
#include "ibmphp.h"
diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index 38183a534b65..728b119f71ad 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -64,32 +64,6 @@ static int debug;
static LIST_HEAD(pci_hotplug_slot_list);
static DEFINE_MUTEX(pci_hp_mutex);
-/* these strings match up with the values in pci_bus_speed */
-static char *pci_bus_speed_strings[] = {
- "33 MHz PCI", /* 0x00 */
- "66 MHz PCI", /* 0x01 */
- "66 MHz PCI-X", /* 0x02 */
- "100 MHz PCI-X", /* 0x03 */
- "133 MHz PCI-X", /* 0x04 */
- NULL, /* 0x05 */
- NULL, /* 0x06 */
- NULL, /* 0x07 */
- NULL, /* 0x08 */
- "66 MHz PCI-X 266", /* 0x09 */
- "100 MHz PCI-X 266", /* 0x0a */
- "133 MHz PCI-X 266", /* 0x0b */
- NULL, /* 0x0c */
- NULL, /* 0x0d */
- NULL, /* 0x0e */
- NULL, /* 0x0f */
- NULL, /* 0x10 */
- "66 MHz PCI-X 533", /* 0x11 */
- "100 MHz PCI-X 533", /* 0x12 */
- "133 MHz PCI-X 533", /* 0x13 */
- "2.5 GT/s PCIe", /* 0x14 */
- "5.0 GT/s PCIe", /* 0x15 */
-};
-
#ifdef CONFIG_HOTPLUG_PCI_CPCI
extern int cpci_hotplug_init(int debug);
extern void cpci_hotplug_exit(void);
@@ -118,8 +92,6 @@ GET_STATUS(power_status, u8)
GET_STATUS(attention_status, u8)
GET_STATUS(latch_status, u8)
GET_STATUS(adapter_status, u8)
-GET_STATUS(max_bus_speed, enum pci_bus_speed)
-GET_STATUS(cur_bus_speed, enum pci_bus_speed)
static ssize_t power_read_file(struct pci_slot *slot, char *buf)
{
@@ -263,60 +235,6 @@ static struct pci_slot_attribute hotplug_slot_attr_presence = {
.show = presence_read_file,
};
-static char *unknown_speed = "Unknown bus speed";
-
-static ssize_t max_bus_speed_read_file(struct pci_slot *slot, char *buf)
-{
- char *speed_string;
- int retval;
- enum pci_bus_speed value;
-
- retval = get_max_bus_speed(slot->hotplug, &value);
- if (retval)
- goto exit;
-
- if (value == PCI_SPEED_UNKNOWN)
- speed_string = unknown_speed;
- else
- speed_string = pci_bus_speed_strings[value];
-
- retval = sprintf (buf, "%s\n", speed_string);
-
-exit:
- return retval;
-}
-
-static struct pci_slot_attribute hotplug_slot_attr_max_bus_speed = {
- .attr = {.name = "max_bus_speed", .mode = S_IFREG | S_IRUGO},
- .show = max_bus_speed_read_file,
-};
-
-static ssize_t cur_bus_speed_read_file(struct pci_slot *slot, char *buf)
-{
- char *speed_string;
- int retval;
- enum pci_bus_speed value;
-
- retval = get_cur_bus_speed(slot->hotplug, &value);
- if (retval)
- goto exit;
-
- if (value == PCI_SPEED_UNKNOWN)
- speed_string = unknown_speed;
- else
- speed_string = pci_bus_speed_strings[value];
-
- retval = sprintf (buf, "%s\n", speed_string);
-
-exit:
- return retval;
-}
-
-static struct pci_slot_attribute hotplug_slot_attr_cur_bus_speed = {
- .attr = {.name = "cur_bus_speed", .mode = S_IFREG | S_IRUGO},
- .show = cur_bus_speed_read_file,
-};
-
static ssize_t test_write_file(struct pci_slot *pci_slot, const char *buf,
size_t count)
{
@@ -391,26 +309,6 @@ static bool has_adapter_file(struct pci_slot *pci_slot)
return false;
}
-static bool has_max_bus_speed_file(struct pci_slot *pci_slot)
-{
- struct hotplug_slot *slot = pci_slot->hotplug;
- if ((!slot) || (!slot->ops))
- return false;
- if (slot->ops->get_max_bus_speed)
- return true;
- return false;
-}
-
-static bool has_cur_bus_speed_file(struct pci_slot *pci_slot)
-{
- struct hotplug_slot *slot = pci_slot->hotplug;
- if ((!slot) || (!slot->ops))
- return false;
- if (slot->ops->get_cur_bus_speed)
- return true;
- return false;
-}
-
static bool has_test_file(struct pci_slot *pci_slot)
{
struct hotplug_slot *slot = pci_slot->hotplug;
@@ -456,20 +354,6 @@ static int fs_add_slot(struct pci_slot *slot)
goto exit_adapter;
}
- if (has_max_bus_speed_file(slot)) {
- retval = sysfs_create_file(&slot->kobj,
- &hotplug_slot_attr_max_bus_speed.attr);
- if (retval)
- goto exit_max_speed;
- }
-
- if (has_cur_bus_speed_file(slot)) {
- retval = sysfs_create_file(&slot->kobj,
- &hotplug_slot_attr_cur_bus_speed.attr);
- if (retval)
- goto exit_cur_speed;
- }
-
if (has_test_file(slot)) {
retval = sysfs_create_file(&slot->kobj,
&hotplug_slot_attr_test.attr);
@@ -480,14 +364,6 @@ static int fs_add_slot(struct pci_slot *slot)
goto exit;
exit_test:
- if (has_cur_bus_speed_file(slot))
- sysfs_remove_file(&slot->kobj,
- &hotplug_slot_attr_cur_bus_speed.attr);
-exit_cur_speed:
- if (has_max_bus_speed_file(slot))
- sysfs_remove_file(&slot->kobj,
- &hotplug_slot_attr_max_bus_speed.attr);
-exit_max_speed:
if (has_adapter_file(slot))
sysfs_remove_file(&slot->kobj,
&hotplug_slot_attr_presence.attr);
@@ -523,14 +399,6 @@ static void fs_remove_slot(struct pci_slot *slot)
sysfs_remove_file(&slot->kobj,
&hotplug_slot_attr_presence.attr);
- if (has_max_bus_speed_file(slot))
- sysfs_remove_file(&slot->kobj,
- &hotplug_slot_attr_max_bus_speed.attr);
-
- if (has_cur_bus_speed_file(slot))
- sysfs_remove_file(&slot->kobj,
- &hotplug_slot_attr_cur_bus_speed.attr);
-
if (has_test_file(slot))
sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_test.attr);
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 5674b2075bdc..920f820edf87 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -69,8 +69,6 @@ static int get_power_status (struct hotplug_slot *slot, u8 *value);
static int get_attention_status (struct hotplug_slot *slot, u8 *value);
static int get_latch_status (struct hotplug_slot *slot, u8 *value);
static int get_adapter_status (struct hotplug_slot *slot, u8 *value);
-static int get_max_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value);
-static int get_cur_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value);
/**
* release_slot - free up the memory used by a slot
@@ -113,8 +111,6 @@ static int init_slot(struct controller *ctrl)
ops->disable_slot = disable_slot;
ops->get_power_status = get_power_status;
ops->get_adapter_status = get_adapter_status;
- ops->get_max_bus_speed = get_max_bus_speed;
- ops->get_cur_bus_speed = get_cur_bus_speed;
if (MRL_SENS(ctrl))
ops->get_latch_status = get_latch_status;
if (ATTN_LED(ctrl)) {
@@ -227,27 +223,6 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
return pciehp_get_adapter_status(slot, value);
}
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot,
- enum pci_bus_speed *value)
-{
- struct slot *slot = hotplug_slot->private;
-
- ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
- __func__, slot_name(slot));
-
- return pciehp_get_max_link_speed(slot, value);
-}
-
-static int get_cur_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
- struct slot *slot = hotplug_slot->private;
-
- ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
- __func__, slot_name(slot));
-
- return pciehp_get_cur_link_speed(slot, value);
-}
-
static int pciehp_probe(struct pcie_device *dev)
{
int rc;
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index d6ac1b261dd9..9a7f247e8ac1 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -341,6 +341,7 @@ void pciehp_queue_pushbutton_work(struct work_struct *work)
p_slot->state = POWERON_STATE;
break;
default:
+ kfree(info);
goto out;
}
queue_work(pciehp_wq, &info->work);
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 10040d58c8ef..40b48f569b1e 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -492,6 +492,7 @@ int pciehp_power_on_slot(struct slot * slot)
u16 slot_cmd;
u16 cmd_mask;
u16 slot_status;
+ u16 lnk_status;
int retval = 0;
/* Clear sticky power-fault bit from previous power failures */
@@ -523,6 +524,14 @@ int pciehp_power_on_slot(struct slot * slot)
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd);
+ retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status);
+ if (retval) {
+ ctrl_err(ctrl, "%s: Cannot read LNKSTA register\n",
+ __func__);
+ return retval;
+ }
+ pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status);
+
return retval;
}
@@ -610,37 +619,6 @@ static irqreturn_t pcie_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
-int pciehp_get_max_link_speed(struct slot *slot, enum pci_bus_speed *value)
-{
- struct controller *ctrl = slot->ctrl;
- enum pcie_link_speed lnk_speed;
- u32 lnk_cap;
- int retval = 0;
-
- retval = pciehp_readl(ctrl, PCI_EXP_LNKCAP, &lnk_cap);
- if (retval) {
- ctrl_err(ctrl, "%s: Cannot read LNKCAP register\n", __func__);
- return retval;
- }
-
- switch (lnk_cap & 0x000F) {
- case 1:
- lnk_speed = PCIE_2_5GB;
- break;
- case 2:
- lnk_speed = PCIE_5_0GB;
- break;
- default:
- lnk_speed = PCIE_LNK_SPEED_UNKNOWN;
- break;
- }
-
- *value = lnk_speed;
- ctrl_dbg(ctrl, "Max link speed = %d\n", lnk_speed);
-
- return retval;
-}
-
int pciehp_get_max_lnk_width(struct slot *slot,
enum pcie_link_width *value)
{
@@ -691,38 +669,6 @@ int pciehp_get_max_lnk_width(struct slot *slot,
return retval;
}
-int pciehp_get_cur_link_speed(struct slot *slot, enum pci_bus_speed *value)
-{
- struct controller *ctrl = slot->ctrl;
- enum pcie_link_speed lnk_speed = PCI_SPEED_UNKNOWN;
- int retval = 0;
- u16 lnk_status;
-
- retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status);
- if (retval) {
- ctrl_err(ctrl, "%s: Cannot read LNKSTATUS register\n",
- __func__);
- return retval;
- }
-
- switch (lnk_status & PCI_EXP_LNKSTA_CLS) {
- case 1:
- lnk_speed = PCIE_2_5GB;
- break;
- case 2:
- lnk_speed = PCIE_5_0GB;
- break;
- default:
- lnk_speed = PCIE_LNK_SPEED_UNKNOWN;
- break;
- }
-
- *value = lnk_speed;
- ctrl_dbg(ctrl, "Current link speed = %d\n", lnk_speed);
-
- return retval;
-}
-
int pciehp_get_cur_lnk_width(struct slot *slot,
enum pcie_link_width *value)
{
diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c
index 21733108adde..0a16444c14c9 100644
--- a/drivers/pci/hotplug/pciehp_pci.c
+++ b/drivers/pci/hotplug/pciehp_pci.c
@@ -53,17 +53,15 @@ static int __ref pciehp_add_bridge(struct pci_dev *dev)
busnr = pci_scan_bridge(parent, dev, busnr, pass);
if (!dev->subordinate)
return -1;
- pci_bus_size_bridges(dev->subordinate);
- pci_bus_assign_resources(parent);
- pci_enable_bridges(parent);
- pci_bus_add_devices(parent);
+
return 0;
}
int pciehp_configure_device(struct slot *p_slot)
{
struct pci_dev *dev;
- struct pci_bus *parent = p_slot->ctrl->pcie->port->subordinate;
+ struct pci_dev *bridge = p_slot->ctrl->pcie->port;
+ struct pci_bus *parent = bridge->subordinate;
int num, fn;
struct controller *ctrl = p_slot->ctrl;
@@ -96,12 +94,25 @@ int pciehp_configure_device(struct slot *p_slot)
(dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) {
pciehp_add_bridge(dev);
}
+ pci_dev_put(dev);
+ }
+
+ pci_assign_unassigned_bridge_resources(bridge);
+
+ for (fn = 0; fn < 8; fn++) {
+ dev = pci_get_slot(parent, PCI_DEVFN(0, fn));
+ if (!dev)
+ continue;
+ if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
+ pci_dev_put(dev);
+ continue;
+ }
pci_configure_slot(dev);
pci_dev_put(dev);
}
- pci_bus_assign_resources(parent);
pci_bus_add_devices(parent);
+
return 0;
}
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index c159223389ec..dcaae725fd79 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -130,10 +130,9 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 * value)
return 0;
}
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
+static enum pci_bus_speed get_max_bus_speed(struct slot *slot)
{
- struct slot *slot = (struct slot *)hotplug_slot->private;
-
+ enum pci_bus_speed speed;
switch (slot->type) {
case 1:
case 2:
@@ -141,30 +140,30 @@ static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_spe
case 4:
case 5:
case 6:
- *value = PCI_SPEED_33MHz; /* speed for case 1-6 */
+ speed = PCI_SPEED_33MHz; /* speed for case 1-6 */
break;
case 7:
case 8:
- *value = PCI_SPEED_66MHz;
+ speed = PCI_SPEED_66MHz;
break;
case 11:
case 14:
- *value = PCI_SPEED_66MHz_PCIX;
+ speed = PCI_SPEED_66MHz_PCIX;
break;
case 12:
case 15:
- *value = PCI_SPEED_100MHz_PCIX;
+ speed = PCI_SPEED_100MHz_PCIX;
break;
case 13:
case 16:
- *value = PCI_SPEED_133MHz_PCIX;
+ speed = PCI_SPEED_133MHz_PCIX;
break;
default:
- *value = PCI_SPEED_UNKNOWN;
+ speed = PCI_SPEED_UNKNOWN;
break;
-
}
- return 0;
+
+ return speed;
}
static int get_children_props(struct device_node *dn, const int **drc_indexes,
@@ -408,6 +407,8 @@ static int enable_slot(struct hotplug_slot *hotplug_slot)
slot->state = NOT_VALID;
return -EINVAL;
}
+
+ slot->bus->max_bus_speed = get_max_bus_speed(slot);
return 0;
}
@@ -429,7 +430,6 @@ struct hotplug_slot_ops rpaphp_hotplug_slot_ops = {
.get_power_status = get_power_status,
.get_attention_status = get_attention_status,
.get_adapter_status = get_adapter_status,
- .get_max_bus_speed = get_max_bus_speed,
};
module_init(rpaphp_init);
diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h
index 8e210cd76e55..d2627e1c3ac1 100644
--- a/drivers/pci/hotplug/shpchp.h
+++ b/drivers/pci/hotplug/shpchp.h
@@ -333,8 +333,6 @@ struct hpc_ops {
int (*set_attention_status)(struct slot *slot, u8 status);
int (*get_latch_status)(struct slot *slot, u8 *status);
int (*get_adapter_status)(struct slot *slot, u8 *status);
- int (*get_max_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
- int (*get_cur_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
int (*get_adapter_speed)(struct slot *slot, enum pci_bus_speed *speed);
int (*get_mode1_ECC_cap)(struct slot *slot, u8 *mode);
int (*get_prog_int)(struct slot *slot, u8 *prog_int);
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index 8a520a3d0f59..a5062297f488 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -65,8 +65,6 @@ static int get_power_status (struct hotplug_slot *slot, u8 *value);
static int get_attention_status (struct hotplug_slot *slot, u8 *value);
static int get_latch_status (struct hotplug_slot *slot, u8 *value);
static int get_adapter_status (struct hotplug_slot *slot, u8 *value);
-static int get_max_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value);
-static int get_cur_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value);
static struct hotplug_slot_ops shpchp_hotplug_slot_ops = {
.set_attention_status = set_attention_status,
@@ -76,8 +74,6 @@ static struct hotplug_slot_ops shpchp_hotplug_slot_ops = {
.get_attention_status = get_attention_status,
.get_latch_status = get_latch_status,
.get_adapter_status = get_adapter_status,
- .get_max_bus_speed = get_max_bus_speed,
- .get_cur_bus_speed = get_cur_bus_speed,
};
/**
@@ -279,37 +275,6 @@ static int get_adapter_status (struct hotplug_slot *hotplug_slot, u8 *value)
return 0;
}
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot,
- enum pci_bus_speed *value)
-{
- struct slot *slot = get_slot(hotplug_slot);
- int retval;
-
- ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
- __func__, slot_name(slot));
-
- retval = slot->hpc_ops->get_max_bus_speed(slot, value);
- if (retval < 0)
- *value = PCI_SPEED_UNKNOWN;
-
- return 0;
-}
-
-static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
- struct slot *slot = get_slot(hotplug_slot);
- int retval;
-
- ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
- __func__, slot_name(slot));
-
- retval = slot->hpc_ops->get_cur_bus_speed(slot, value);
- if (retval < 0)
- *value = PCI_SPEED_UNKNOWN;
-
- return 0;
-}
-
static int is_shpc_capable(struct pci_dev *dev)
{
if ((dev->vendor == PCI_VENDOR_ID_AMD) || (dev->device ==
diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c
index b8ab2796e66a..3bba0c0888ff 100644
--- a/drivers/pci/hotplug/shpchp_ctrl.c
+++ b/drivers/pci/hotplug/shpchp_ctrl.c
@@ -285,17 +285,8 @@ static int board_added(struct slot *p_slot)
return WRONG_BUS_FREQUENCY;
}
- rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bsp);
- if (rc) {
- ctrl_err(ctrl, "Can't get bus operation speed\n");
- return WRONG_BUS_FREQUENCY;
- }
-
- rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &msp);
- if (rc) {
- ctrl_err(ctrl, "Can't get max bus operation speed\n");
- msp = bsp;
- }
+ bsp = ctrl->pci_dev->bus->cur_bus_speed;
+ msp = ctrl->pci_dev->bus->max_bus_speed;
/* Check if there are other slots or devices on the same bus */
if (!list_empty(&ctrl->pci_dev->subordinate->devices))
@@ -462,6 +453,7 @@ void shpchp_queue_pushbutton_work(struct work_struct *work)
p_slot->state = POWERON_STATE;
break;
default:
+ kfree(info);
goto out;
}
queue_work(shpchp_wq, &info->work);
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 86dc39847769..5f5e8d2e3552 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -660,6 +660,75 @@ static int hpc_slot_disable(struct slot * slot)
return retval;
}
+static int shpc_get_cur_bus_speed(struct controller *ctrl)
+{
+ int retval = 0;
+ struct pci_bus *bus = ctrl->pci_dev->subordinate;
+ enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
+ u16 sec_bus_reg = shpc_readw(ctrl, SEC_BUS_CONFIG);
+ u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
+ u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7);
+
+ if ((pi == 1) && (speed_mode > 4)) {
+ retval = -ENODEV;
+ goto out;
+ }
+
+ switch (speed_mode) {
+ case 0x0:
+ bus_speed = PCI_SPEED_33MHz;
+ break;
+ case 0x1:
+ bus_speed = PCI_SPEED_66MHz;
+ break;
+ case 0x2:
+ bus_speed = PCI_SPEED_66MHz_PCIX;
+ break;
+ case 0x3:
+ bus_speed = PCI_SPEED_100MHz_PCIX;
+ break;
+ case 0x4:
+ bus_speed = PCI_SPEED_133MHz_PCIX;
+ break;
+ case 0x5:
+ bus_speed = PCI_SPEED_66MHz_PCIX_ECC;
+ break;
+ case 0x6:
+ bus_speed = PCI_SPEED_100MHz_PCIX_ECC;
+ break;
+ case 0x7:
+ bus_speed = PCI_SPEED_133MHz_PCIX_ECC;
+ break;
+ case 0x8:
+ bus_speed = PCI_SPEED_66MHz_PCIX_266;
+ break;
+ case 0x9:
+ bus_speed = PCI_SPEED_100MHz_PCIX_266;
+ break;
+ case 0xa:
+ bus_speed = PCI_SPEED_133MHz_PCIX_266;
+ break;
+ case 0xb:
+ bus_speed = PCI_SPEED_66MHz_PCIX_533;
+ break;
+ case 0xc:
+ bus_speed = PCI_SPEED_100MHz_PCIX_533;
+ break;
+ case 0xd:
+ bus_speed = PCI_SPEED_133MHz_PCIX_533;
+ break;
+ default:
+ retval = -ENODEV;
+ break;
+ }
+
+ out:
+ bus->cur_bus_speed = bus_speed;
+ dbg("Current bus speed = %d\n", bus_speed);
+ return retval;
+}
+
+
static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value)
{
int retval;
@@ -720,6 +789,8 @@ static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value)
retval = shpc_write_cmd(slot, 0, cmd);
if (retval)
ctrl_err(ctrl, "%s: Write command failed!\n", __func__);
+ else
+ shpc_get_cur_bus_speed(ctrl);
return retval;
}
@@ -803,10 +874,10 @@ static irqreturn_t shpc_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value)
+static int shpc_get_max_bus_speed(struct controller *ctrl)
{
int retval = 0;
- struct controller *ctrl = slot->ctrl;
+ struct pci_bus *bus = ctrl->pci_dev->subordinate;
enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
u32 slot_avail1 = shpc_readl(ctrl, SLOT_AVAIL1);
@@ -842,79 +913,12 @@ static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value)
retval = -ENODEV;
}
- *value = bus_speed;
+ bus->max_bus_speed = bus_speed;
ctrl_dbg(ctrl, "Max bus speed = %d\n", bus_speed);
return retval;
}
-static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value)
-{
- int retval = 0;
- struct controller *ctrl = slot->ctrl;
- enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
- u16 sec_bus_reg = shpc_readw(ctrl, SEC_BUS_CONFIG);
- u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
- u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7);
-
- if ((pi == 1) && (speed_mode > 4)) {
- *value = PCI_SPEED_UNKNOWN;
- return -ENODEV;
- }
-
- switch (speed_mode) {
- case 0x0:
- *value = PCI_SPEED_33MHz;
- break;
- case 0x1:
- *value = PCI_SPEED_66MHz;
- break;
- case 0x2:
- *value = PCI_SPEED_66MHz_PCIX;
- break;
- case 0x3:
- *value = PCI_SPEED_100MHz_PCIX;
- break;
- case 0x4:
- *value = PCI_SPEED_133MHz_PCIX;
- break;
- case 0x5:
- *value = PCI_SPEED_66MHz_PCIX_ECC;
- break;
- case 0x6:
- *value = PCI_SPEED_100MHz_PCIX_ECC;
- break;
- case 0x7:
- *value = PCI_SPEED_133MHz_PCIX_ECC;
- break;
- case 0x8:
- *value = PCI_SPEED_66MHz_PCIX_266;
- break;
- case 0x9:
- *value = PCI_SPEED_100MHz_PCIX_266;
- break;
- case 0xa:
- *value = PCI_SPEED_133MHz_PCIX_266;
- break;
- case 0xb:
- *value = PCI_SPEED_66MHz_PCIX_533;
- break;
- case 0xc:
- *value = PCI_SPEED_100MHz_PCIX_533;
- break;
- case 0xd:
- *value = PCI_SPEED_133MHz_PCIX_533;
- break;
- default:
- *value = PCI_SPEED_UNKNOWN;
- retval = -ENODEV;
- break;
- }
-
- ctrl_dbg(ctrl, "Current bus speed = %d\n", bus_speed);
- return retval;
-}
-
static struct hpc_ops shpchp_hpc_ops = {
.power_on_slot = hpc_power_on_slot,
.slot_enable = hpc_slot_enable,
@@ -926,8 +930,6 @@ static struct hpc_ops shpchp_hpc_ops = {
.get_latch_status = hpc_get_latch_status,
.get_adapter_status = hpc_get_adapter_status,
- .get_max_bus_speed = hpc_get_max_bus_speed,
- .get_cur_bus_speed = hpc_get_cur_bus_speed,
.get_adapter_speed = hpc_get_adapter_speed,
.get_mode1_ECC_cap = hpc_get_mode1_ECC_cap,
.get_prog_int = hpc_get_prog_int,
@@ -1086,6 +1088,9 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
}
ctrl_dbg(ctrl, "HPC at %s irq=%x\n", pci_name(pdev), pdev->irq);
+ shpc_get_max_bus_speed(ctrl);
+ shpc_get_cur_bus_speed(ctrl);
+
/*
* If this is the first controller to be initialized,
* initialize the shpchpd work queue
diff --git a/drivers/pci/hotplug/shpchp_sysfs.c b/drivers/pci/hotplug/shpchp_sysfs.c
index 29fa9d26adae..071b7dc0094b 100644
--- a/drivers/pci/hotplug/shpchp_sysfs.c
+++ b/drivers/pci/hotplug/shpchp_sysfs.c
@@ -47,8 +47,7 @@ static ssize_t show_ctrl (struct device *dev, struct device_attribute *attr, cha
bus = pdev->subordinate;
out += sprintf(buf, "Free resources: memory\n");
- for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) {
- res = bus->resource[index];
+ pci_bus_for_each_resource(bus, res, index) {
if (res && (res->flags & IORESOURCE_MEM) &&
!(res->flags & IORESOURCE_PREFETCH)) {
out += sprintf(out, "start = %8.8llx, "
@@ -58,8 +57,7 @@ static ssize_t show_ctrl (struct device *dev, struct device_attribute *attr, cha
}
}
out += sprintf(out, "Free resources: prefetchable memory\n");
- for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) {
- res = bus->resource[index];
+ pci_bus_for_each_resource(bus, res, index) {
if (res && (res->flags & IORESOURCE_MEM) &&
(res->flags & IORESOURCE_PREFETCH)) {
out += sprintf(out, "start = %8.8llx, "
@@ -69,8 +67,7 @@ static ssize_t show_ctrl (struct device *dev, struct device_attribute *attr, cha
}
}
out += sprintf(out, "Free resources: IO\n");
- for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) {
- res = bus->resource[index];
+ pci_bus_for_each_resource(bus, res, index) {
if (res && (res->flags & IORESOURCE_IO)) {
out += sprintf(out, "start = %8.8llx, "
"length = %8.8llx\n",
diff --git a/drivers/pci/legacy.c b/drivers/pci/legacy.c
deleted file mode 100644
index 871f65c15936..000000000000
--- a/drivers/pci/legacy.c
+++ /dev/null
@@ -1,34 +0,0 @@
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include "pci.h"
-
-/**
- * pci_find_device - begin or continue searching for a PCI device by vendor/device id
- * @vendor: PCI vendor id to match, or %PCI_ANY_ID to match all vendor ids
- * @device: PCI device id to match, or %PCI_ANY_ID to match all device ids
- * @from: Previous PCI device found in search, or %NULL for new search.
- *
- * Iterates through the list of known PCI devices. If a PCI device is found
- * with a matching @vendor and @device, a pointer to its device structure is
- * returned. Otherwise, %NULL is returned.
- * A new search is initiated by passing %NULL as the @from argument.
- * Otherwise if @from is not %NULL, searches continue from next device
- * on the global list.
- *
- * NOTE: Do not use this function any more; use pci_get_device() instead, as
- * the PCI device returned by this function can disappear at any moment in
- * time.
- */
-struct pci_dev *pci_find_device(unsigned int vendor, unsigned int device,
- struct pci_dev *from)
-{
- struct pci_dev *pdev;
-
- pci_dev_get(from);
- pdev = pci_get_subsys(vendor, device, PCI_ANY_ID, PCI_ANY_ID, from);
- pci_dev_put(pdev);
- return pdev;
-}
-EXPORT_SYMBOL(pci_find_device);
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 7e2829538a4c..c0c73913833d 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -16,8 +16,144 @@
#include <acpi/acpi_bus.h>
#include <linux/pci-acpi.h>
+#include <linux/pm_runtime.h>
#include "pci.h"
+static DEFINE_MUTEX(pci_acpi_pm_notify_mtx);
+
+/**
+ * pci_acpi_wake_bus - Wake-up notification handler for root buses.
+ * @handle: ACPI handle of a device the notification is for.
+ * @event: Type of the signaled event.
+ * @context: PCI root bus to wake up devices on.
+ */
+static void pci_acpi_wake_bus(acpi_handle handle, u32 event, void *context)
+{
+ struct pci_bus *pci_bus = context;
+
+ if (event == ACPI_NOTIFY_DEVICE_WAKE && pci_bus)
+ pci_pme_wakeup_bus(pci_bus);
+}
+
+/**
+ * pci_acpi_wake_dev - Wake-up notification handler for PCI devices.
+ * @handle: ACPI handle of a device the notification is for.
+ * @event: Type of the signaled event.
+ * @context: PCI device object to wake up.
+ */
+static void pci_acpi_wake_dev(acpi_handle handle, u32 event, void *context)
+{
+ struct pci_dev *pci_dev = context;
+
+ if (event == ACPI_NOTIFY_DEVICE_WAKE && pci_dev) {
+ pci_check_pme_status(pci_dev);
+ pm_runtime_resume(&pci_dev->dev);
+ if (pci_dev->subordinate)
+ pci_pme_wakeup_bus(pci_dev->subordinate);
+ }
+}
+
+/**
+ * add_pm_notifier - Register PM notifier for given ACPI device.
+ * @dev: ACPI device to add the notifier for.
+ * @context: PCI device or bus to check for PME status if an event is signaled.
+ *
+ * NOTE: @dev need not be a run-wake or wake-up device to be a valid source of
+ * PM wake-up events. For example, wake-up events may be generated for bridges
+ * if one of the devices below the bridge is signaling PME, even if the bridge
+ * itself doesn't have a wake-up GPE associated with it.
+ */
+static acpi_status add_pm_notifier(struct acpi_device *dev,
+ acpi_notify_handler handler,
+ void *context)
+{
+ acpi_status status = AE_ALREADY_EXISTS;
+
+ mutex_lock(&pci_acpi_pm_notify_mtx);
+
+ if (dev->wakeup.flags.notifier_present)
+ goto out;
+
+ status = acpi_install_notify_handler(dev->handle,
+ ACPI_SYSTEM_NOTIFY,
+ handler, context);
+ if (ACPI_FAILURE(status))
+ goto out;
+
+ dev->wakeup.flags.notifier_present = true;
+
+ out:
+ mutex_unlock(&pci_acpi_pm_notify_mtx);
+ return status;
+}
+
+/**
+ * remove_pm_notifier - Unregister PM notifier from given ACPI device.
+ * @dev: ACPI device to remove the notifier from.
+ */
+static acpi_status remove_pm_notifier(struct acpi_device *dev,
+ acpi_notify_handler handler)
+{
+ acpi_status status = AE_BAD_PARAMETER;
+
+ mutex_lock(&pci_acpi_pm_notify_mtx);
+
+ if (!dev->wakeup.flags.notifier_present)
+ goto out;
+
+ status = acpi_remove_notify_handler(dev->handle,
+ ACPI_SYSTEM_NOTIFY,
+ handler);
+ if (ACPI_FAILURE(status))
+ goto out;
+
+ dev->wakeup.flags.notifier_present = false;
+
+ out:
+ mutex_unlock(&pci_acpi_pm_notify_mtx);
+ return status;
+}
+
+/**
+ * pci_acpi_add_bus_pm_notifier - Register PM notifier for given PCI bus.
+ * @dev: ACPI device to add the notifier for.
+ * @pci_bus: PCI bus to walk checking for PME status if an event is signaled.
+ */
+acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev,
+ struct pci_bus *pci_bus)
+{
+ return add_pm_notifier(dev, pci_acpi_wake_bus, pci_bus);
+}
+
+/**
+ * pci_acpi_remove_bus_pm_notifier - Unregister PCI bus PM notifier.
+ * @dev: ACPI device to remove the notifier from.
+ */
+acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev)
+{
+ return remove_pm_notifier(dev, pci_acpi_wake_bus);
+}
+
+/**
+ * pci_acpi_add_pm_notifier - Register PM notifier for given PCI device.
+ * @dev: ACPI device to add the notifier for.
+ * @pci_dev: PCI device to check for the PME status if an event is signaled.
+ */
+acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev,
+ struct pci_dev *pci_dev)
+{
+ return add_pm_notifier(dev, pci_acpi_wake_dev, pci_dev);
+}
+
+/**
+ * pci_acpi_remove_pm_notifier - Unregister PCI device PM notifier.
+ * @dev: ACPI device to remove the notifier from.
+ */
+acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev)
+{
+ return remove_pm_notifier(dev, pci_acpi_wake_dev);
+}
+
/*
* _SxD returns the D-state with the highest power
* (lowest D-state number) supported in the S-state "x".
@@ -131,12 +267,87 @@ static int acpi_pci_sleep_wake(struct pci_dev *dev, bool enable)
return 0;
}
+/**
+ * acpi_dev_run_wake - Enable/disable wake-up for given device.
+ * @phys_dev: Device to enable/disable the platform to wake-up the system for.
+ * @enable: Whether enable or disable the wake-up functionality.
+ *
+ * Find the ACPI device object corresponding to @pci_dev and try to
+ * enable/disable the GPE associated with it.
+ */
+static int acpi_dev_run_wake(struct device *phys_dev, bool enable)
+{
+ struct acpi_device *dev;
+ acpi_handle handle;
+ int error = -ENODEV;
+
+ if (!device_run_wake(phys_dev))
+ return -EINVAL;
+
+ handle = DEVICE_ACPI_HANDLE(phys_dev);
+ if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &dev))) {
+ dev_dbg(phys_dev, "ACPI handle has no context in %s!\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ if (enable) {
+ if (!dev->wakeup.run_wake_count++) {
+ acpi_enable_wakeup_device_power(dev, ACPI_STATE_S0);
+ acpi_enable_gpe(dev->wakeup.gpe_device,
+ dev->wakeup.gpe_number,
+ ACPI_GPE_TYPE_RUNTIME);
+ }
+ } else if (dev->wakeup.run_wake_count > 0) {
+ if (!--dev->wakeup.run_wake_count) {
+ acpi_disable_gpe(dev->wakeup.gpe_device,
+ dev->wakeup.gpe_number,
+ ACPI_GPE_TYPE_RUNTIME);
+ acpi_disable_wakeup_device_power(dev);
+ }
+ } else {
+ error = -EALREADY;
+ }
+
+ return error;
+}
+
+static void acpi_pci_propagate_run_wake(struct pci_bus *bus, bool enable)
+{
+ while (bus->parent) {
+ struct pci_dev *bridge = bus->self;
+
+ if (bridge->pme_interrupt)
+ return;
+ if (!acpi_dev_run_wake(&bridge->dev, enable))
+ return;
+ bus = bus->parent;
+ }
+
+ /* We have reached the root bus. */
+ if (bus->bridge)
+ acpi_dev_run_wake(bus->bridge, enable);
+}
+
+static int acpi_pci_run_wake(struct pci_dev *dev, bool enable)
+{
+ if (dev->pme_interrupt)
+ return 0;
+
+ if (!acpi_dev_run_wake(&dev->dev, enable))
+ return 0;
+
+ acpi_pci_propagate_run_wake(dev->bus, enable);
+ return 0;
+}
+
static struct pci_platform_pm_ops acpi_pci_platform_pm = {
.is_manageable = acpi_pci_power_manageable,
.set_state = acpi_pci_set_power_state,
.choose_state = acpi_pci_choose_state,
.can_wakeup = acpi_pci_can_wakeup,
.sleep_wake = acpi_pci_sleep_wake,
+ .run_wake = acpi_pci_run_wake,
};
/* ACPI bus type */
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index e5d47be3c6d7..f9a0aec3abcf 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -17,6 +17,7 @@
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/cpu.h>
+#include <linux/pm_runtime.h>
#include "pci.h"
struct pci_dynid {
@@ -404,6 +405,35 @@ static void pci_device_shutdown(struct device *dev)
pci_msix_shutdown(pci_dev);
}
+#ifdef CONFIG_PM_OPS
+
+/* Auxiliary functions used for system resume and run-time resume. */
+
+/**
+ * pci_restore_standard_config - restore standard config registers of PCI device
+ * @pci_dev: PCI device to handle
+ */
+static int pci_restore_standard_config(struct pci_dev *pci_dev)
+{
+ pci_update_current_state(pci_dev, PCI_UNKNOWN);
+
+ if (pci_dev->current_state != PCI_D0) {
+ int error = pci_set_power_state(pci_dev, PCI_D0);
+ if (error)
+ return error;
+ }
+
+ return pci_restore_state(pci_dev);
+}
+
+static void pci_pm_default_resume_early(struct pci_dev *pci_dev)
+{
+ pci_restore_standard_config(pci_dev);
+ pci_fixup_device(pci_fixup_resume_early, pci_dev);
+}
+
+#endif
+
#ifdef CONFIG_PM_SLEEP
/*
@@ -520,29 +550,6 @@ static int pci_legacy_resume(struct device *dev)
/* Auxiliary functions used by the new power management framework */
-/**
- * pci_restore_standard_config - restore standard config registers of PCI device
- * @pci_dev: PCI device to handle
- */
-static int pci_restore_standard_config(struct pci_dev *pci_dev)
-{
- pci_update_current_state(pci_dev, PCI_UNKNOWN);
-
- if (pci_dev->current_state != PCI_D0) {
- int error = pci_set_power_state(pci_dev, PCI_D0);
- if (error)
- return error;
- }
-
- return pci_restore_state(pci_dev);
-}
-
-static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev)
-{
- pci_restore_standard_config(pci_dev);
- pci_fixup_device(pci_fixup_resume_early, pci_dev);
-}
-
static void pci_pm_default_resume(struct pci_dev *pci_dev)
{
pci_fixup_device(pci_fixup_resume, pci_dev);
@@ -581,6 +588,17 @@ static int pci_pm_prepare(struct device *dev)
struct device_driver *drv = dev->driver;
int error = 0;
+ /*
+ * PCI devices suspended at run time need to be resumed at this
+ * point, because in general it is necessary to reconfigure them for
+ * system suspend. Namely, if the device is supposed to wake up the
+ * system from the sleep state, we may need to reconfigure it for this
+ * purpose. In turn, if the device is not supposed to wake up the
+ * system from the sleep state, we'll have to prevent it from signaling
+ * wake-up.
+ */
+ pm_runtime_resume(dev);
+
if (drv && drv->pm && drv->pm->prepare)
error = drv->pm->prepare(dev);
@@ -595,6 +613,13 @@ static void pci_pm_complete(struct device *dev)
drv->pm->complete(dev);
}
+#else /* !CONFIG_PM_SLEEP */
+
+#define pci_pm_prepare NULL
+#define pci_pm_complete NULL
+
+#endif /* !CONFIG_PM_SLEEP */
+
#ifdef CONFIG_SUSPEND
static int pci_pm_suspend(struct device *dev)
@@ -681,7 +706,7 @@ static int pci_pm_resume_noirq(struct device *dev)
struct device_driver *drv = dev->driver;
int error = 0;
- pci_pm_default_resume_noirq(pci_dev);
+ pci_pm_default_resume_early(pci_dev);
if (pci_has_legacy_pm_support(pci_dev))
return pci_legacy_resume_early(dev);
@@ -879,7 +904,7 @@ static int pci_pm_restore_noirq(struct device *dev)
struct device_driver *drv = dev->driver;
int error = 0;
- pci_pm_default_resume_noirq(pci_dev);
+ pci_pm_default_resume_early(pci_dev);
if (pci_has_legacy_pm_support(pci_dev))
return pci_legacy_resume_early(dev);
@@ -931,6 +956,84 @@ static int pci_pm_restore(struct device *dev)
#endif /* !CONFIG_HIBERNATION */
+#ifdef CONFIG_PM_RUNTIME
+
+static int pci_pm_runtime_suspend(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+ pci_power_t prev = pci_dev->current_state;
+ int error;
+
+ if (!pm || !pm->runtime_suspend)
+ return -ENOSYS;
+
+ error = pm->runtime_suspend(dev);
+ suspend_report_result(pm->runtime_suspend, error);
+ if (error)
+ return error;
+
+ pci_fixup_device(pci_fixup_suspend, pci_dev);
+
+ if (!pci_dev->state_saved && pci_dev->current_state != PCI_D0
+ && pci_dev->current_state != PCI_UNKNOWN) {
+ WARN_ONCE(pci_dev->current_state != prev,
+ "PCI PM: State of device not saved by %pF\n",
+ pm->runtime_suspend);
+ return 0;
+ }
+
+ if (!pci_dev->state_saved)
+ pci_save_state(pci_dev);
+
+ pci_finish_runtime_suspend(pci_dev);
+
+ return 0;
+}
+
+static int pci_pm_runtime_resume(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+ if (!pm || !pm->runtime_resume)
+ return -ENOSYS;
+
+ pci_pm_default_resume_early(pci_dev);
+ __pci_enable_wake(pci_dev, PCI_D0, true, false);
+ pci_fixup_device(pci_fixup_resume, pci_dev);
+
+ return pm->runtime_resume(dev);
+}
+
+static int pci_pm_runtime_idle(struct device *dev)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+ if (!pm)
+ return -ENOSYS;
+
+ if (pm->runtime_idle) {
+ int ret = pm->runtime_idle(dev);
+ if (ret)
+ return ret;
+ }
+
+ pm_runtime_suspend(dev);
+
+ return 0;
+}
+
+#else /* !CONFIG_PM_RUNTIME */
+
+#define pci_pm_runtime_suspend NULL
+#define pci_pm_runtime_resume NULL
+#define pci_pm_runtime_idle NULL
+
+#endif /* !CONFIG_PM_RUNTIME */
+
+#ifdef CONFIG_PM_OPS
+
const struct dev_pm_ops pci_dev_pm_ops = {
.prepare = pci_pm_prepare,
.complete = pci_pm_complete,
@@ -946,15 +1049,18 @@ const struct dev_pm_ops pci_dev_pm_ops = {
.thaw_noirq = pci_pm_thaw_noirq,
.poweroff_noirq = pci_pm_poweroff_noirq,
.restore_noirq = pci_pm_restore_noirq,
+ .runtime_suspend = pci_pm_runtime_suspend,
+ .runtime_resume = pci_pm_runtime_resume,
+ .runtime_idle = pci_pm_runtime_idle,
};
#define PCI_PM_OPS_PTR (&pci_dev_pm_ops)
-#else /* !CONFIG_PM_SLEEP */
+#else /* !COMFIG_PM_OPS */
#define PCI_PM_OPS_PTR NULL
-#endif /* !CONFIG_PM_SLEEP */
+#endif /* !COMFIG_PM_OPS */
/**
* __pci_register_driver - register a new pci driver
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 315fea47e784..5b548aee9cbc 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -19,8 +19,8 @@
#include <linux/pci-aspm.h>
#include <linux/pm_wakeup.h>
#include <linux/interrupt.h>
-#include <asm/dma.h> /* isa_dma_bridge_buggy */
#include <linux/device.h>
+#include <linux/pm_runtime.h>
#include <asm/setup.h>
#include "pci.h"
@@ -29,6 +29,12 @@ const char *pci_power_names[] = {
};
EXPORT_SYMBOL_GPL(pci_power_names);
+int isa_dma_bridge_buggy;
+EXPORT_SYMBOL(isa_dma_bridge_buggy);
+
+int pci_pci_problems;
+EXPORT_SYMBOL(pci_pci_problems);
+
unsigned int pci_pm_d3_delay;
static void pci_dev_d3_sleep(struct pci_dev *dev)
@@ -380,10 +386,9 @@ pci_find_parent_resource(const struct pci_dev *dev, struct resource *res)
{
const struct pci_bus *bus = dev->bus;
int i;
- struct resource *best = NULL;
+ struct resource *best = NULL, *r;
- for(i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
- struct resource *r = bus->resource[i];
+ pci_bus_for_each_resource(bus, r, i) {
if (!r)
continue;
if (res->start && !(res->start >= r->start && res->end <= r->end))
@@ -457,6 +462,12 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable)
pci_platform_pm->sleep_wake(dev, enable) : -ENODEV;
}
+static inline int platform_pci_run_wake(struct pci_dev *dev, bool enable)
+{
+ return pci_platform_pm ?
+ pci_platform_pm->run_wake(dev, enable) : -ENODEV;
+}
+
/**
* pci_raw_set_power_state - Use PCI PM registers to set the power state of
* given PCI device
@@ -1190,6 +1201,66 @@ int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state)
}
/**
+ * pci_check_pme_status - Check if given device has generated PME.
+ * @dev: Device to check.
+ *
+ * Check the PME status of the device and if set, clear it and clear PME enable
+ * (if set). Return 'true' if PME status and PME enable were both set or
+ * 'false' otherwise.
+ */
+bool pci_check_pme_status(struct pci_dev *dev)
+{
+ int pmcsr_pos;
+ u16 pmcsr;
+ bool ret = false;
+
+ if (!dev->pm_cap)
+ return false;
+
+ pmcsr_pos = dev->pm_cap + PCI_PM_CTRL;
+ pci_read_config_word(dev, pmcsr_pos, &pmcsr);
+ if (!(pmcsr & PCI_PM_CTRL_PME_STATUS))
+ return false;
+
+ /* Clear PME status. */
+ pmcsr |= PCI_PM_CTRL_PME_STATUS;
+ if (pmcsr & PCI_PM_CTRL_PME_ENABLE) {
+ /* Disable PME to avoid interrupt flood. */
+ pmcsr &= ~PCI_PM_CTRL_PME_ENABLE;
+ ret = true;
+ }
+
+ pci_write_config_word(dev, pmcsr_pos, pmcsr);
+
+ return ret;
+}
+
+/**
+ * pci_pme_wakeup - Wake up a PCI device if its PME Status bit is set.
+ * @dev: Device to handle.
+ * @ign: Ignored.
+ *
+ * Check if @dev has generated PME and queue a resume request for it in that
+ * case.
+ */
+static int pci_pme_wakeup(struct pci_dev *dev, void *ign)
+{
+ if (pci_check_pme_status(dev))
+ pm_request_resume(&dev->dev);
+ return 0;
+}
+
+/**
+ * pci_pme_wakeup_bus - Walk given bus and wake up devices on it, if necessary.
+ * @bus: Top bus of the subtree to walk.
+ */
+void pci_pme_wakeup_bus(struct pci_bus *bus)
+{
+ if (bus)
+ pci_walk_bus(bus, pci_pme_wakeup, NULL);
+}
+
+/**
* pci_pme_capable - check the capability of PCI device to generate PME#
* @dev: PCI device to handle.
* @state: PCI state from which device will issue PME#.
@@ -1230,9 +1301,10 @@ void pci_pme_active(struct pci_dev *dev, bool enable)
}
/**
- * pci_enable_wake - enable PCI device as wakeup event source
+ * __pci_enable_wake - enable PCI device as wakeup event source
* @dev: PCI device affected
* @state: PCI state from which device will issue wakeup events
+ * @runtime: True if the events are to be generated at run time
* @enable: True to enable event generation; false to disable
*
* This enables the device as a wakeup event source, or disables it.
@@ -1248,11 +1320,12 @@ void pci_pme_active(struct pci_dev *dev, bool enable)
* Error code depending on the platform is returned if both the platform and
* the native mechanism fail to enable the generation of wake-up events
*/
-int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable)
+int __pci_enable_wake(struct pci_dev *dev, pci_power_t state,
+ bool runtime, bool enable)
{
int ret = 0;
- if (enable && !device_may_wakeup(&dev->dev))
+ if (enable && !runtime && !device_may_wakeup(&dev->dev))
return -EINVAL;
/* Don't do the same thing twice in a row for one device. */
@@ -1272,19 +1345,24 @@ int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable)
pci_pme_active(dev, true);
else
ret = 1;
- error = platform_pci_sleep_wake(dev, true);
+ error = runtime ? platform_pci_run_wake(dev, true) :
+ platform_pci_sleep_wake(dev, true);
if (ret)
ret = error;
if (!ret)
dev->wakeup_prepared = true;
} else {
- platform_pci_sleep_wake(dev, false);
+ if (runtime)
+ platform_pci_run_wake(dev, false);
+ else
+ platform_pci_sleep_wake(dev, false);
pci_pme_active(dev, false);
dev->wakeup_prepared = false;
}
return ret;
}
+EXPORT_SYMBOL(__pci_enable_wake);
/**
* pci_wake_from_d3 - enable/disable device to wake up from D3_hot or D3_cold
@@ -1394,6 +1472,66 @@ int pci_back_from_sleep(struct pci_dev *dev)
}
/**
+ * pci_finish_runtime_suspend - Carry out PCI-specific part of runtime suspend.
+ * @dev: PCI device being suspended.
+ *
+ * Prepare @dev to generate wake-up events at run time and put it into a low
+ * power state.
+ */
+int pci_finish_runtime_suspend(struct pci_dev *dev)
+{
+ pci_power_t target_state = pci_target_state(dev);
+ int error;
+
+ if (target_state == PCI_POWER_ERROR)
+ return -EIO;
+
+ __pci_enable_wake(dev, target_state, true, pci_dev_run_wake(dev));
+
+ error = pci_set_power_state(dev, target_state);
+
+ if (error)
+ __pci_enable_wake(dev, target_state, true, false);
+
+ return error;
+}
+
+/**
+ * pci_dev_run_wake - Check if device can generate run-time wake-up events.
+ * @dev: Device to check.
+ *
+ * Return true if the device itself is cabable of generating wake-up events
+ * (through the platform or using the native PCIe PME) or if the device supports
+ * PME and one of its upstream bridges can generate wake-up events.
+ */
+bool pci_dev_run_wake(struct pci_dev *dev)
+{
+ struct pci_bus *bus = dev->bus;
+
+ if (device_run_wake(&dev->dev))
+ return true;
+
+ if (!dev->pme_support)
+ return false;
+
+ while (bus->parent) {
+ struct pci_dev *bridge = bus->self;
+
+ if (device_run_wake(&bridge->dev))
+ return true;
+
+ bus = bus->parent;
+ }
+
+ /* We have reached the root bus. */
+ if (bus->bridge)
+ return device_run_wake(bus->bridge);
+
+ return false;
+}
+EXPORT_SYMBOL_GPL(pci_dev_run_wake);
+
+/**
* pci_pm_init - Initialize PM functions of given PCI device
* @dev: PCI device to handle.
*/
@@ -1402,6 +1540,7 @@ void pci_pm_init(struct pci_dev *dev)
int pm;
u16 pmc;
+ device_enable_async_suspend(&dev->dev);
dev->wakeup_prepared = false;
dev->pm_cap = 0;
@@ -2615,6 +2754,23 @@ int pci_resource_bar(struct pci_dev *dev, int resno, enum pci_bar_type *type)
return 0;
}
+/* Some architectures require additional programming to enable VGA */
+static arch_set_vga_state_t arch_set_vga_state;
+
+void __init pci_register_set_vga_state(arch_set_vga_state_t func)
+{
+ arch_set_vga_state = func; /* NULL disables */
+}
+
+static int pci_set_vga_state_arch(struct pci_dev *dev, bool decode,
+ unsigned int command_bits, bool change_bridge)
+{
+ if (arch_set_vga_state)
+ return arch_set_vga_state(dev, decode, command_bits,
+ change_bridge);
+ return 0;
+}
+
/**
* pci_set_vga_state - set VGA decode state on device and parents if requested
* @dev: the PCI device
@@ -2628,9 +2784,15 @@ int pci_set_vga_state(struct pci_dev *dev, bool decode,
struct pci_bus *bus;
struct pci_dev *bridge;
u16 cmd;
+ int rc;
WARN_ON(command_bits & ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY));
+ /* ARCH specific VGA enables */
+ rc = pci_set_vga_state_arch(dev, decode, command_bits, change_bridge);
+ if (rc)
+ return rc;
+
pci_read_config_word(dev, PCI_COMMAND, &cmd);
if (decode == true)
cmd |= command_bits;
@@ -2845,6 +3007,7 @@ EXPORT_SYMBOL(pcim_pin_device);
EXPORT_SYMBOL(pci_disable_device);
EXPORT_SYMBOL(pci_find_capability);
EXPORT_SYMBOL(pci_bus_find_capability);
+EXPORT_SYMBOL(pci_register_set_vga_state);
EXPORT_SYMBOL(pci_release_regions);
EXPORT_SYMBOL(pci_request_regions);
EXPORT_SYMBOL(pci_request_regions_exclusive);
@@ -2871,10 +3034,8 @@ EXPORT_SYMBOL(pci_save_state);
EXPORT_SYMBOL(pci_restore_state);
EXPORT_SYMBOL(pci_pme_capable);
EXPORT_SYMBOL(pci_pme_active);
-EXPORT_SYMBOL(pci_enable_wake);
EXPORT_SYMBOL(pci_wake_from_d3);
EXPORT_SYMBOL(pci_target_state);
EXPORT_SYMBOL(pci_prepare_to_sleep);
EXPORT_SYMBOL(pci_back_from_sleep);
EXPORT_SYMBOL_GPL(pci_set_pcie_reset_state);
-
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index fbd0e3adbca3..4eb10f48d270 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -35,6 +35,10 @@ int pci_probe_reset_function(struct pci_dev *dev);
*
* @sleep_wake: enables/disables the system wake up capability of given device
*
+ * @run_wake: enables/disables the platform to generate run-time wake-up events
+ * for given device (the device's wake-up capability has to be
+ * enabled by @sleep_wake for this feature to work)
+ *
* If given platform is generally capable of power managing PCI devices, all of
* these callbacks are mandatory.
*/
@@ -44,11 +48,16 @@ struct pci_platform_pm_ops {
pci_power_t (*choose_state)(struct pci_dev *dev);
bool (*can_wakeup)(struct pci_dev *dev);
int (*sleep_wake)(struct pci_dev *dev, bool enable);
+ int (*run_wake)(struct pci_dev *dev, bool enable);
};
extern int pci_set_platform_pm(struct pci_platform_pm_ops *ops);
extern void pci_update_current_state(struct pci_dev *dev, pci_power_t state);
extern void pci_disable_enabled_device(struct pci_dev *dev);
+extern bool pci_check_pme_status(struct pci_dev *dev);
+extern int pci_finish_runtime_suspend(struct pci_dev *dev);
+extern int __pci_pme_wakeup(struct pci_dev *dev, void *ign);
+extern void pci_pme_wakeup_bus(struct pci_bus *bus);
extern void pci_pm_init(struct pci_dev *dev);
extern void platform_pci_wakeup_init(struct pci_dev *dev);
extern void pci_allocate_cap_save_buffers(struct pci_dev *dev);
@@ -319,6 +328,13 @@ struct pci_dev_reset_methods {
int (*reset)(struct pci_dev *dev, int probe);
};
+#ifdef CONFIG_PCI_QUIRKS
extern int pci_dev_specific_reset(struct pci_dev *dev, int probe);
+#else
+static inline int pci_dev_specific_reset(struct pci_dev *dev, int probe)
+{
+ return -ENOTTY;
+}
+#endif
#endif /* DRIVERS_PCI_H */
diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index 5a0c6ad53f8e..b8b494b3e0d0 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
@@ -46,3 +46,7 @@ config PCIEASPM_DEBUG
help
This enables PCI Express ASPM debug support. It will add per-device
interface to control ASPM.
+
+config PCIE_PME
+ def_bool y
+ depends on PCIEPORTBUS && PM_RUNTIME && EXPERIMENTAL && ACPI
diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile
index 11f6bb1eae24..ea654545e7c4 100644
--- a/drivers/pci/pcie/Makefile
+++ b/drivers/pci/pcie/Makefile
@@ -11,3 +11,5 @@ obj-$(CONFIG_PCIEPORTBUS) += pcieportdrv.o
# Build PCI Express AER if needed
obj-$(CONFIG_PCIEAER) += aer/
+
+obj-$(CONFIG_PCIE_PME) += pme/
diff --git a/drivers/pci/pcie/pme/Makefile b/drivers/pci/pcie/pme/Makefile
new file mode 100644
index 000000000000..8b9238053080
--- /dev/null
+++ b/drivers/pci/pcie/pme/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for PCI-Express Root Port PME signaling driver
+#
+
+obj-$(CONFIG_PCIE_PME) += pmedriver.o
+
+pmedriver-objs := pcie_pme.o
+pmedriver-$(CONFIG_ACPI) += pcie_pme_acpi.o
diff --git a/drivers/pci/pcie/pme/pcie_pme.c b/drivers/pci/pcie/pme/pcie_pme.c
new file mode 100644
index 000000000000..7b3cbff547ee
--- /dev/null
+++ b/drivers/pci/pcie/pme/pcie_pme.c
@@ -0,0 +1,505 @@
+/*
+ * PCIe Native PME support
+ *
+ * Copyright (C) 2007 - 2009 Intel Corp
+ * Copyright (C) 2007 - 2009 Shaohua Li <shaohua.li@intel.com>
+ * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License V2. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/pcieport_if.h>
+#include <linux/acpi.h>
+#include <linux/pci-acpi.h>
+#include <linux/pm_runtime.h>
+
+#include "../../pci.h"
+#include "pcie_pme.h"
+
+#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */
+#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */
+
+/*
+ * If set, this switch will prevent the PCIe root port PME service driver from
+ * being registered. Consequently, the interrupt-based PCIe PME signaling will
+ * not be used by any PCIe root ports in that case.
+ */
+static bool pcie_pme_disabled;
+
+/*
+ * The PCI Express Base Specification 2.0, Section 6.1.8, states the following:
+ * "In order to maintain compatibility with non-PCI Express-aware system
+ * software, system power management logic must be configured by firmware to use
+ * the legacy mechanism of signaling PME by default. PCI Express-aware system
+ * software must notify the firmware prior to enabling native, interrupt-based
+ * PME signaling." However, if the platform doesn't provide us with a suitable
+ * notification mechanism or the notification fails, it is not clear whether or
+ * not we are supposed to use the interrupt-based PCIe PME signaling. The
+ * switch below can be used to indicate the desired behaviour. When set, it
+ * will make the kernel use the interrupt-based PCIe PME signaling regardless of
+ * the platform notification status, although the kernel will attempt to notify
+ * the platform anyway. When unset, it will prevent the kernel from using the
+ * the interrupt-based PCIe PME signaling if the platform notification fails,
+ * which is the default.
+ */
+static bool pcie_pme_force_enable;
+
+/*
+ * If this switch is set, MSI will not be used for PCIe PME signaling. This
+ * causes the PCIe port driver to use INTx interrupts only, but it turns out
+ * that using MSI for PCIe PME signaling doesn't play well with PCIe PME-based
+ * wake-up from system sleep states.
+ */
+bool pcie_pme_msi_disabled;
+
+static int __init pcie_pme_setup(char *str)
+{
+ if (!strcmp(str, "off"))
+ pcie_pme_disabled = true;
+ else if (!strcmp(str, "force"))
+ pcie_pme_force_enable = true;
+ else if (!strcmp(str, "nomsi"))
+ pcie_pme_msi_disabled = true;
+ return 1;
+}
+__setup("pcie_pme=", pcie_pme_setup);
+
+/**
+ * pcie_pme_platform_setup - Ensure that the kernel controls the PCIe PME.
+ * @srv: PCIe PME root port service to use for carrying out the check.
+ *
+ * Notify the platform that the native PCIe PME is going to be used and return
+ * 'true' if the control of the PCIe PME registers has been acquired from the
+ * platform.
+ */
+static bool pcie_pme_platform_setup(struct pcie_device *srv)
+{
+ if (!pcie_pme_platform_notify(srv))
+ return true;
+ return pcie_pme_force_enable;
+}
+
+struct pcie_pme_service_data {
+ spinlock_t lock;
+ struct pcie_device *srv;
+ struct work_struct work;
+ bool noirq; /* Don't enable the PME interrupt used by this service. */
+};
+
+/**
+ * pcie_pme_interrupt_enable - Enable/disable PCIe PME interrupt generation.
+ * @dev: PCIe root port or event collector.
+ * @enable: Enable or disable the interrupt.
+ */
+static void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable)
+{
+ int rtctl_pos;
+ u16 rtctl;
+
+ rtctl_pos = pci_pcie_cap(dev) + PCI_EXP_RTCTL;
+
+ pci_read_config_word(dev, rtctl_pos, &rtctl);
+ if (enable)
+ rtctl |= PCI_EXP_RTCTL_PMEIE;
+ else
+ rtctl &= ~PCI_EXP_RTCTL_PMEIE;
+ pci_write_config_word(dev, rtctl_pos, rtctl);
+}
+
+/**
+ * pcie_pme_clear_status - Clear root port PME interrupt status.
+ * @dev: PCIe root port or event collector.
+ */
+static void pcie_pme_clear_status(struct pci_dev *dev)
+{
+ int rtsta_pos;
+ u32 rtsta;
+
+ rtsta_pos = pci_pcie_cap(dev) + PCI_EXP_RTSTA;
+
+ pci_read_config_dword(dev, rtsta_pos, &rtsta);
+ rtsta |= PCI_EXP_RTSTA_PME;
+ pci_write_config_dword(dev, rtsta_pos, rtsta);
+}
+
+/**
+ * pcie_pme_walk_bus - Scan a PCI bus for devices asserting PME#.
+ * @bus: PCI bus to scan.
+ *
+ * Scan given PCI bus and all buses under it for devices asserting PME#.
+ */
+static bool pcie_pme_walk_bus(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+ bool ret = false;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ /* Skip PCIe devices in case we started from a root port. */
+ if (!pci_is_pcie(dev) && pci_check_pme_status(dev)) {
+ pm_request_resume(&dev->dev);
+ ret = true;
+ }
+
+ if (dev->subordinate && pcie_pme_walk_bus(dev->subordinate))
+ ret = true;
+ }
+
+ return ret;
+}
+
+/**
+ * pcie_pme_from_pci_bridge - Check if PCIe-PCI bridge generated a PME.
+ * @bus: Secondary bus of the bridge.
+ * @devfn: Device/function number to check.
+ *
+ * PME from PCI devices under a PCIe-PCI bridge may be converted to an in-band
+ * PCIe PME message. In such that case the bridge should use the Requester ID
+ * of device/function number 0 on its secondary bus.
+ */
+static bool pcie_pme_from_pci_bridge(struct pci_bus *bus, u8 devfn)
+{
+ struct pci_dev *dev;
+ bool found = false;
+
+ if (devfn)
+ return false;
+
+ dev = pci_dev_get(bus->self);
+ if (!dev)
+ return false;
+
+ if (pci_is_pcie(dev) && dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) {
+ down_read(&pci_bus_sem);
+ if (pcie_pme_walk_bus(bus))
+ found = true;
+ up_read(&pci_bus_sem);
+ }
+
+ pci_dev_put(dev);
+ return found;
+}
+
+/**
+ * pcie_pme_handle_request - Find device that generated PME and handle it.
+ * @port: Root port or event collector that generated the PME interrupt.
+ * @req_id: PCIe Requester ID of the device that generated the PME.
+ */
+static void pcie_pme_handle_request(struct pci_dev *port, u16 req_id)
+{
+ u8 busnr = req_id >> 8, devfn = req_id & 0xff;
+ struct pci_bus *bus;
+ struct pci_dev *dev;
+ bool found = false;
+
+ /* First, check if the PME is from the root port itself. */
+ if (port->devfn == devfn && port->bus->number == busnr) {
+ if (pci_check_pme_status(port)) {
+ pm_request_resume(&port->dev);
+ found = true;
+ } else {
+ /*
+ * Apparently, the root port generated the PME on behalf
+ * of a non-PCIe device downstream. If this is done by
+ * a root port, the Requester ID field in its status
+ * register may contain either the root port's, or the
+ * source device's information (PCI Express Base
+ * Specification, Rev. 2.0, Section 6.1.9).
+ */
+ down_read(&pci_bus_sem);
+ found = pcie_pme_walk_bus(port->subordinate);
+ up_read(&pci_bus_sem);
+ }
+ goto out;
+ }
+
+ /* Second, find the bus the source device is on. */
+ bus = pci_find_bus(pci_domain_nr(port->bus), busnr);
+ if (!bus)
+ goto out;
+
+ /* Next, check if the PME is from a PCIe-PCI bridge. */
+ found = pcie_pme_from_pci_bridge(bus, devfn);
+ if (found)
+ goto out;
+
+ /* Finally, try to find the PME source on the bus. */
+ down_read(&pci_bus_sem);
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ pci_dev_get(dev);
+ if (dev->devfn == devfn) {
+ found = true;
+ break;
+ }
+ pci_dev_put(dev);
+ }
+ up_read(&pci_bus_sem);
+
+ if (found) {
+ /* The device is there, but we have to check its PME status. */
+ found = pci_check_pme_status(dev);
+ if (found)
+ pm_request_resume(&dev->dev);
+ pci_dev_put(dev);
+ } else if (devfn) {
+ /*
+ * The device is not there, but we can still try to recover by
+ * assuming that the PME was reported by a PCIe-PCI bridge that
+ * used devfn different from zero.
+ */
+ dev_dbg(&port->dev, "PME interrupt generated for "
+ "non-existent device %02x:%02x.%d\n",
+ busnr, PCI_SLOT(devfn), PCI_FUNC(devfn));
+ found = pcie_pme_from_pci_bridge(bus, 0);
+ }
+
+ out:
+ if (!found)
+ dev_dbg(&port->dev, "Spurious native PME interrupt!\n");
+}
+
+/**
+ * pcie_pme_work_fn - Work handler for PCIe PME interrupt.
+ * @work: Work structure giving access to service data.
+ */
+static void pcie_pme_work_fn(struct work_struct *work)
+{
+ struct pcie_pme_service_data *data =
+ container_of(work, struct pcie_pme_service_data, work);
+ struct pci_dev *port = data->srv->port;
+ int rtsta_pos;
+ u32 rtsta;
+
+ rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA;
+
+ spin_lock_irq(&data->lock);
+
+ for (;;) {
+ if (data->noirq)
+ break;
+
+ pci_read_config_dword(port, rtsta_pos, &rtsta);
+ if (rtsta & PCI_EXP_RTSTA_PME) {
+ /*
+ * Clear PME status of the port. If there are other
+ * pending PMEs, the status will be set again.
+ */
+ pcie_pme_clear_status(port);
+
+ spin_unlock_irq(&data->lock);
+ pcie_pme_handle_request(port, rtsta & 0xffff);
+ spin_lock_irq(&data->lock);
+
+ continue;
+ }
+
+ /* No need to loop if there are no more PMEs pending. */
+ if (!(rtsta & PCI_EXP_RTSTA_PENDING))
+ break;
+
+ spin_unlock_irq(&data->lock);
+ cpu_relax();
+ spin_lock_irq(&data->lock);
+ }
+
+ if (!data->noirq)
+ pcie_pme_interrupt_enable(port, true);
+
+ spin_unlock_irq(&data->lock);
+}
+
+/**
+ * pcie_pme_irq - Interrupt handler for PCIe root port PME interrupt.
+ * @irq: Interrupt vector.
+ * @context: Interrupt context pointer.
+ */
+static irqreturn_t pcie_pme_irq(int irq, void *context)
+{
+ struct pci_dev *port;
+ struct pcie_pme_service_data *data;
+ int rtsta_pos;
+ u32 rtsta;
+ unsigned long flags;
+
+ port = ((struct pcie_device *)context)->port;
+ data = get_service_data((struct pcie_device *)context);
+
+ rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA;
+
+ spin_lock_irqsave(&data->lock, flags);
+ pci_read_config_dword(port, rtsta_pos, &rtsta);
+
+ if (!(rtsta & PCI_EXP_RTSTA_PME)) {
+ spin_unlock_irqrestore(&data->lock, flags);
+ return IRQ_NONE;
+ }
+
+ pcie_pme_interrupt_enable(port, false);
+ spin_unlock_irqrestore(&data->lock, flags);
+
+ /* We don't use pm_wq, because it's freezable. */
+ schedule_work(&data->work);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * pcie_pme_set_native - Set the PME interrupt flag for given device.
+ * @dev: PCI device to handle.
+ * @ign: Ignored.
+ */
+static int pcie_pme_set_native(struct pci_dev *dev, void *ign)
+{
+ dev_info(&dev->dev, "Signaling PME through PCIe PME interrupt\n");
+
+ device_set_run_wake(&dev->dev, true);
+ dev->pme_interrupt = true;
+ return 0;
+}
+
+/**
+ * pcie_pme_mark_devices - Set the PME interrupt flag for devices below a port.
+ * @port: PCIe root port or event collector to handle.
+ *
+ * For each device below given root port, including the port itself (or for each
+ * root complex integrated endpoint if @port is a root complex event collector)
+ * set the flag indicating that it can signal run-time wake-up events via PCIe
+ * PME interrupts.
+ */
+static void pcie_pme_mark_devices(struct pci_dev *port)
+{
+ pcie_pme_set_native(port, NULL);
+ if (port->subordinate) {
+ pci_walk_bus(port->subordinate, pcie_pme_set_native, NULL);
+ } else {
+ struct pci_bus *bus = port->bus;
+ struct pci_dev *dev;
+
+ /* Check if this is a root port event collector. */
+ if (port->pcie_type != PCI_EXP_TYPE_RC_EC || !bus)
+ return;
+
+ down_read(&pci_bus_sem);
+ list_for_each_entry(dev, &bus->devices, bus_list)
+ if (pci_is_pcie(dev)
+ && dev->pcie_type == PCI_EXP_TYPE_RC_END)
+ pcie_pme_set_native(dev, NULL);
+ up_read(&pci_bus_sem);
+ }
+}
+
+/**
+ * pcie_pme_probe - Initialize PCIe PME service for given root port.
+ * @srv: PCIe service to initialize.
+ */
+static int pcie_pme_probe(struct pcie_device *srv)
+{
+ struct pci_dev *port;
+ struct pcie_pme_service_data *data;
+ int ret;
+
+ if (!pcie_pme_platform_setup(srv))
+ return -EACCES;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ spin_lock_init(&data->lock);
+ INIT_WORK(&data->work, pcie_pme_work_fn);
+ data->srv = srv;
+ set_service_data(srv, data);
+
+ port = srv->port;
+ pcie_pme_interrupt_enable(port, false);
+ pcie_pme_clear_status(port);
+
+ ret = request_irq(srv->irq, pcie_pme_irq, IRQF_SHARED, "PCIe PME", srv);
+ if (ret) {
+ kfree(data);
+ } else {
+ pcie_pme_mark_devices(port);
+ pcie_pme_interrupt_enable(port, true);
+ }
+
+ return ret;
+}
+
+/**
+ * pcie_pme_suspend - Suspend PCIe PME service device.
+ * @srv: PCIe service device to suspend.
+ */
+static int pcie_pme_suspend(struct pcie_device *srv)
+{
+ struct pcie_pme_service_data *data = get_service_data(srv);
+ struct pci_dev *port = srv->port;
+
+ spin_lock_irq(&data->lock);
+ pcie_pme_interrupt_enable(port, false);
+ pcie_pme_clear_status(port);
+ data->noirq = true;
+ spin_unlock_irq(&data->lock);
+
+ synchronize_irq(srv->irq);
+
+ return 0;
+}
+
+/**
+ * pcie_pme_resume - Resume PCIe PME service device.
+ * @srv - PCIe service device to resume.
+ */
+static int pcie_pme_resume(struct pcie_device *srv)
+{
+ struct pcie_pme_service_data *data = get_service_data(srv);
+ struct pci_dev *port = srv->port;
+
+ spin_lock_irq(&data->lock);
+ data->noirq = false;
+ pcie_pme_clear_status(port);
+ pcie_pme_interrupt_enable(port, true);
+ spin_unlock_irq(&data->lock);
+
+ return 0;
+}
+
+/**
+ * pcie_pme_remove - Prepare PCIe PME service device for removal.
+ * @srv - PCIe service device to resume.
+ */
+static void pcie_pme_remove(struct pcie_device *srv)
+{
+ pcie_pme_suspend(srv);
+ free_irq(srv->irq, srv);
+ kfree(get_service_data(srv));
+}
+
+static struct pcie_port_service_driver pcie_pme_driver = {
+ .name = "pcie_pme",
+ .port_type = PCI_EXP_TYPE_ROOT_PORT,
+ .service = PCIE_PORT_SERVICE_PME,
+
+ .probe = pcie_pme_probe,
+ .suspend = pcie_pme_suspend,
+ .resume = pcie_pme_resume,
+ .remove = pcie_pme_remove,
+};
+
+/**
+ * pcie_pme_service_init - Register the PCIe PME service driver.
+ */
+static int __init pcie_pme_service_init(void)
+{
+ return pcie_pme_disabled ?
+ -ENODEV : pcie_port_service_register(&pcie_pme_driver);
+}
+
+module_init(pcie_pme_service_init);
diff --git a/drivers/pci/pcie/pme/pcie_pme.h b/drivers/pci/pcie/pme/pcie_pme.h
new file mode 100644
index 000000000000..b30d2b7c9775
--- /dev/null
+++ b/drivers/pci/pcie/pme/pcie_pme.h
@@ -0,0 +1,28 @@
+/*
+ * drivers/pci/pcie/pme/pcie_pme.h
+ *
+ * PCI Express Root Port PME signaling support
+ *
+ * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ */
+
+#ifndef _PCIE_PME_H_
+#define _PCIE_PME_H_
+
+struct pcie_device;
+
+#ifdef CONFIG_ACPI
+extern int pcie_pme_acpi_setup(struct pcie_device *srv);
+
+static inline int pcie_pme_platform_notify(struct pcie_device *srv)
+{
+ return pcie_pme_acpi_setup(srv);
+}
+#else /* !CONFIG_ACPI */
+static inline int pcie_pme_platform_notify(struct pcie_device *srv)
+{
+ return 0;
+}
+#endif /* !CONFIG_ACPI */
+
+#endif
diff --git a/drivers/pci/pcie/pme/pcie_pme_acpi.c b/drivers/pci/pcie/pme/pcie_pme_acpi.c
new file mode 100644
index 000000000000..83ab2287ae3f
--- /dev/null
+++ b/drivers/pci/pcie/pme/pcie_pme_acpi.c
@@ -0,0 +1,54 @@
+/*
+ * PCIe Native PME support, ACPI-related part
+ *
+ * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License V2. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/acpi.h>
+#include <linux/pci-acpi.h>
+#include <linux/pcieport_if.h>
+
+/**
+ * pcie_pme_acpi_setup - Request the ACPI BIOS to release control over PCIe PME.
+ * @srv - PCIe PME service for a root port or event collector.
+ *
+ * Invoked when the PCIe bus type loads PCIe PME service driver. To avoid
+ * conflict with the BIOS PCIe support requires the BIOS to yield PCIe PME
+ * control to the kernel.
+ */
+int pcie_pme_acpi_setup(struct pcie_device *srv)
+{
+ acpi_status status = AE_NOT_FOUND;
+ struct pci_dev *port = srv->port;
+ acpi_handle handle;
+ int error = 0;
+
+ if (acpi_pci_disabled)
+ return -ENOSYS;
+
+ dev_info(&port->dev, "Requesting control of PCIe PME from ACPI BIOS\n");
+
+ handle = acpi_find_root_bridge_handle(port);
+ if (!handle)
+ return -EINVAL;
+
+ status = acpi_pci_osc_control_set(handle,
+ OSC_PCI_EXPRESS_PME_CONTROL |
+ OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
+ if (ACPI_FAILURE(status)) {
+ dev_info(&port->dev,
+ "Failed to receive control of PCIe PME service: %s\n",
+ (status == AE_SUPPORT || status == AE_NOT_FOUND) ?
+ "no _OSC support" : "ACPI _OSC failed");
+ error = -ENODEV;
+ }
+
+ return error;
+}
diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h
index aaeb9d21cba5..813a5c3427b6 100644
--- a/drivers/pci/pcie/portdrv.h
+++ b/drivers/pci/pcie/portdrv.h
@@ -30,4 +30,21 @@ extern void pcie_port_device_remove(struct pci_dev *dev);
extern int __must_check pcie_port_bus_register(void);
extern void pcie_port_bus_unregister(void);
+#ifdef CONFIG_PCIE_PME
+extern bool pcie_pme_msi_disabled;
+
+static inline void pcie_pme_disable_msi(void)
+{
+ pcie_pme_msi_disabled = true;
+}
+
+static inline bool pcie_pme_no_msi(void)
+{
+ return pcie_pme_msi_disabled;
+}
+#else /* !CONFIG_PCIE_PME */
+static inline void pcie_pme_disable_msi(void) {}
+static inline bool pcie_pme_no_msi(void) { return false; }
+#endif /* !CONFIG_PCIE_PME */
+
#endif /* _PORTDRV_H_ */
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index b174188ac121..e73effbe402c 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -186,16 +186,24 @@ static int pcie_port_enable_msix(struct pci_dev *dev, int *vectors, int mask)
*/
static int init_service_irqs(struct pci_dev *dev, int *irqs, int mask)
{
- int i, irq;
+ int i, irq = -1;
+
+ /* We have to use INTx if MSI cannot be used for PCIe PME. */
+ if ((mask & PCIE_PORT_SERVICE_PME) && pcie_pme_no_msi()) {
+ if (dev->pin)
+ irq = dev->irq;
+ goto no_msi;
+ }
/* Try to use MSI-X if supported */
if (!pcie_port_enable_msix(dev, irqs, mask))
return 0;
+
/* We're not going to use MSI-X, so try MSI and fall back to INTx */
- irq = -1;
if (!pci_enable_msi(dev) || dev->pin)
irq = dev->irq;
+ no_msi:
for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++)
irqs[i] = irq;
irqs[PCIE_PORT_SERVICE_VC_SHIFT] = -1;
@@ -277,6 +285,7 @@ static int pcie_device_init(struct pci_dev *pdev, int service, int irq)
pci_name(pdev),
get_descriptor_id(pdev->pcie_type, service));
device->parent = &pdev->dev;
+ device_enable_async_suspend(device);
retval = device_register(device);
if (retval)
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index 13c8972886e6..127e8f169d9c 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -15,6 +15,7 @@
#include <linux/slab.h>
#include <linux/pcieport_if.h>
#include <linux/aer.h>
+#include <linux/dmi.h>
#include "portdrv.h"
#include "aer/aerdrv.h"
@@ -273,10 +274,36 @@ static struct pci_driver pcie_portdriver = {
.driver.pm = PCIE_PORTDRV_PM_OPS,
};
+static int __init dmi_pcie_pme_disable_msi(const struct dmi_system_id *d)
+{
+ pr_notice("%s detected: will not use MSI for PCIe PME signaling\n",
+ d->ident);
+ pcie_pme_disable_msi();
+ return 0;
+}
+
+static struct dmi_system_id __initdata pcie_portdrv_dmi_table[] = {
+ /*
+ * Boxes that should not use MSI for PCIe PME signaling.
+ */
+ {
+ .callback = dmi_pcie_pme_disable_msi,
+ .ident = "MSI Wind U-100",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "MICRO-STAR INTERNATIONAL CO., LTD"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "U-100"),
+ },
+ },
+ {}
+};
+
static int __init pcie_portdrv_init(void)
{
int retval;
+ dmi_check_system(pcie_portdrv_dmi_table);
+
retval = pcie_port_bus_register();
if (retval) {
printk(KERN_WARNING "PCIE: bus_register error: %d\n", retval);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 446e4a94d7d3..2a943090a3b7 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -89,6 +89,7 @@ static void release_pcibus_dev(struct device *dev)
if (pci_bus->bridge)
put_device(pci_bus->bridge);
+ pci_bus_remove_resources(pci_bus);
kfree(pci_bus);
}
@@ -281,26 +282,12 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
}
}
-void __devinit pci_read_bridge_bases(struct pci_bus *child)
+static void __devinit pci_read_bridge_io(struct pci_bus *child)
{
struct pci_dev *dev = child->self;
u8 io_base_lo, io_limit_lo;
- u16 mem_base_lo, mem_limit_lo;
unsigned long base, limit;
struct resource *res;
- int i;
-
- if (pci_is_root_bus(child)) /* It's a host bus, nothing to read */
- return;
-
- dev_info(&dev->dev, "PCI bridge to [bus %02x-%02x]%s\n",
- child->secondary, child->subordinate,
- dev->transparent ? " (subtractive decode)": "");
-
- if (dev->transparent) {
- for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++)
- child->resource[i] = child->parent->resource[i - 3];
- }
res = child->resource[0];
pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
@@ -316,26 +303,50 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
limit |= (io_limit_hi << 16);
}
- if (base <= limit) {
+ if (base && base <= limit) {
res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO;
if (!res->start)
res->start = base;
if (!res->end)
res->end = limit + 0xfff;
dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res);
+ } else {
+ dev_printk(KERN_DEBUG, &dev->dev,
+ " bridge window [io %04lx - %04lx] reg reading\n",
+ base, limit);
}
+}
+
+static void __devinit pci_read_bridge_mmio(struct pci_bus *child)
+{
+ struct pci_dev *dev = child->self;
+ u16 mem_base_lo, mem_limit_lo;
+ unsigned long base, limit;
+ struct resource *res;
res = child->resource[1];
pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo);
pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo);
base = (mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16;
limit = (mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16;
- if (base <= limit) {
+ if (base && base <= limit) {
res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
res->start = base;
res->end = limit + 0xfffff;
dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res);
+ } else {
+ dev_printk(KERN_DEBUG, &dev->dev,
+ " bridge window [mem 0x%08lx - 0x%08lx] reg reading\n",
+ base, limit + 0xfffff);
}
+}
+
+static void __devinit pci_read_bridge_mmio_pref(struct pci_bus *child)
+{
+ struct pci_dev *dev = child->self;
+ u16 mem_base_lo, mem_limit_lo;
+ unsigned long base, limit;
+ struct resource *res;
res = child->resource[2];
pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
@@ -366,7 +377,7 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
#endif
}
}
- if (base <= limit) {
+ if (base && base <= limit) {
res->flags = (mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) |
IORESOURCE_MEM | IORESOURCE_PREFETCH;
if (res->flags & PCI_PREF_RANGE_TYPE_64)
@@ -374,6 +385,44 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
res->start = base;
res->end = limit + 0xfffff;
dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res);
+ } else {
+ dev_printk(KERN_DEBUG, &dev->dev,
+ " bridge window [mem 0x%08lx - %08lx pref] reg reading\n",
+ base, limit + 0xfffff);
+ }
+}
+
+void __devinit pci_read_bridge_bases(struct pci_bus *child)
+{
+ struct pci_dev *dev = child->self;
+ struct resource *res;
+ int i;
+
+ if (pci_is_root_bus(child)) /* It's a host bus, nothing to read */
+ return;
+
+ dev_info(&dev->dev, "PCI bridge to [bus %02x-%02x]%s\n",
+ child->secondary, child->subordinate,
+ dev->transparent ? " (subtractive decode)" : "");
+
+ pci_bus_remove_resources(child);
+ for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++)
+ child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i];
+
+ pci_read_bridge_io(child);
+ pci_read_bridge_mmio(child);
+ pci_read_bridge_mmio_pref(child);
+
+ if (dev->transparent) {
+ pci_bus_for_each_resource(child->parent, res, i) {
+ if (res) {
+ pci_bus_add_resource(child, res,
+ PCI_SUBTRACTIVE_DECODE);
+ dev_printk(KERN_DEBUG, &dev->dev,
+ " bridge window %pR (subtractive decode)\n",
+ res);
+ }
+ }
}
}
@@ -387,10 +436,147 @@ static struct pci_bus * pci_alloc_bus(void)
INIT_LIST_HEAD(&b->children);
INIT_LIST_HEAD(&b->devices);
INIT_LIST_HEAD(&b->slots);
+ INIT_LIST_HEAD(&b->resources);
+ b->max_bus_speed = PCI_SPEED_UNKNOWN;
+ b->cur_bus_speed = PCI_SPEED_UNKNOWN;
}
return b;
}
+static unsigned char pcix_bus_speed[] = {
+ PCI_SPEED_UNKNOWN, /* 0 */
+ PCI_SPEED_66MHz_PCIX, /* 1 */
+ PCI_SPEED_100MHz_PCIX, /* 2 */
+ PCI_SPEED_133MHz_PCIX, /* 3 */
+ PCI_SPEED_UNKNOWN, /* 4 */
+ PCI_SPEED_66MHz_PCIX_ECC, /* 5 */
+ PCI_SPEED_100MHz_PCIX_ECC, /* 6 */
+ PCI_SPEED_133MHz_PCIX_ECC, /* 7 */
+ PCI_SPEED_UNKNOWN, /* 8 */
+ PCI_SPEED_66MHz_PCIX_266, /* 9 */
+ PCI_SPEED_100MHz_PCIX_266, /* A */
+ PCI_SPEED_133MHz_PCIX_266, /* B */
+ PCI_SPEED_UNKNOWN, /* C */
+ PCI_SPEED_66MHz_PCIX_533, /* D */
+ PCI_SPEED_100MHz_PCIX_533, /* E */
+ PCI_SPEED_133MHz_PCIX_533 /* F */
+};
+
+static unsigned char pcie_link_speed[] = {
+ PCI_SPEED_UNKNOWN, /* 0 */
+ PCIE_SPEED_2_5GT, /* 1 */
+ PCIE_SPEED_5_0GT, /* 2 */
+ PCIE_SPEED_8_0GT, /* 3 */
+ PCI_SPEED_UNKNOWN, /* 4 */
+ PCI_SPEED_UNKNOWN, /* 5 */
+ PCI_SPEED_UNKNOWN, /* 6 */
+ PCI_SPEED_UNKNOWN, /* 7 */
+ PCI_SPEED_UNKNOWN, /* 8 */
+ PCI_SPEED_UNKNOWN, /* 9 */
+ PCI_SPEED_UNKNOWN, /* A */
+ PCI_SPEED_UNKNOWN, /* B */
+ PCI_SPEED_UNKNOWN, /* C */
+ PCI_SPEED_UNKNOWN, /* D */
+ PCI_SPEED_UNKNOWN, /* E */
+ PCI_SPEED_UNKNOWN /* F */
+};
+
+void pcie_update_link_speed(struct pci_bus *bus, u16 linksta)
+{
+ bus->cur_bus_speed = pcie_link_speed[linksta & 0xf];
+}
+EXPORT_SYMBOL_GPL(pcie_update_link_speed);
+
+static unsigned char agp_speeds[] = {
+ AGP_UNKNOWN,
+ AGP_1X,
+ AGP_2X,
+ AGP_4X,
+ AGP_8X
+};
+
+static enum pci_bus_speed agp_speed(int agp3, int agpstat)
+{
+ int index = 0;
+
+ if (agpstat & 4)
+ index = 3;
+ else if (agpstat & 2)
+ index = 2;
+ else if (agpstat & 1)
+ index = 1;
+ else
+ goto out;
+
+ if (agp3) {
+ index += 2;
+ if (index == 5)
+ index = 0;
+ }
+
+ out:
+ return agp_speeds[index];
+}
+
+
+static void pci_set_bus_speed(struct pci_bus *bus)
+{
+ struct pci_dev *bridge = bus->self;
+ int pos;
+
+ pos = pci_find_capability(bridge, PCI_CAP_ID_AGP);
+ if (!pos)
+ pos = pci_find_capability(bridge, PCI_CAP_ID_AGP3);
+ if (pos) {
+ u32 agpstat, agpcmd;
+
+ pci_read_config_dword(bridge, pos + PCI_AGP_STATUS, &agpstat);
+ bus->max_bus_speed = agp_speed(agpstat & 8, agpstat & 7);
+
+ pci_read_config_dword(bridge, pos + PCI_AGP_COMMAND, &agpcmd);
+ bus->cur_bus_speed = agp_speed(agpstat & 8, agpcmd & 7);
+ }
+
+ pos = pci_find_capability(bridge, PCI_CAP_ID_PCIX);
+ if (pos) {
+ u16 status;
+ enum pci_bus_speed max;
+ pci_read_config_word(bridge, pos + 2, &status);
+
+ if (status & 0x8000) {
+ max = PCI_SPEED_133MHz_PCIX_533;
+ } else if (status & 0x4000) {
+ max = PCI_SPEED_133MHz_PCIX_266;
+ } else if (status & 0x0002) {
+ if (((status >> 12) & 0x3) == 2) {
+ max = PCI_SPEED_133MHz_PCIX_ECC;
+ } else {
+ max = PCI_SPEED_133MHz_PCIX;
+ }
+ } else {
+ max = PCI_SPEED_66MHz_PCIX;
+ }
+
+ bus->max_bus_speed = max;
+ bus->cur_bus_speed = pcix_bus_speed[(status >> 6) & 0xf];
+
+ return;
+ }
+
+ pos = pci_find_capability(bridge, PCI_CAP_ID_EXP);
+ if (pos) {
+ u32 linkcap;
+ u16 linksta;
+
+ pci_read_config_dword(bridge, pos + PCI_EXP_LNKCAP, &linkcap);
+ bus->max_bus_speed = pcie_link_speed[linkcap & 0xf];
+
+ pci_read_config_word(bridge, pos + PCI_EXP_LNKSTA, &linksta);
+ pcie_update_link_speed(bus, linksta);
+ }
+}
+
+
static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
struct pci_dev *bridge, int busnr)
{
@@ -430,6 +616,8 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
child->self = bridge;
child->bridge = get_device(&bridge->dev);
+ pci_set_bus_speed(child);
+
/* Set up default resource pointers and names.. */
for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) {
child->resource[i] = &bridge->resource[PCI_BRIDGE_RESOURCES+i];
@@ -1081,6 +1269,45 @@ struct pci_dev *__ref pci_scan_single_device(struct pci_bus *bus, int devfn)
}
EXPORT_SYMBOL(pci_scan_single_device);
+static unsigned next_ari_fn(struct pci_dev *dev, unsigned fn)
+{
+ u16 cap;
+ unsigned pos, next_fn;
+
+ if (!dev)
+ return 0;
+
+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI);
+ if (!pos)
+ return 0;
+ pci_read_config_word(dev, pos + 4, &cap);
+ next_fn = cap >> 8;
+ if (next_fn <= fn)
+ return 0;
+ return next_fn;
+}
+
+static unsigned next_trad_fn(struct pci_dev *dev, unsigned fn)
+{
+ return (fn + 1) % 8;
+}
+
+static unsigned no_next_fn(struct pci_dev *dev, unsigned fn)
+{
+ return 0;
+}
+
+static int only_one_child(struct pci_bus *bus)
+{
+ struct pci_dev *parent = bus->self;
+ if (!parent || !pci_is_pcie(parent))
+ return 0;
+ if (parent->pcie_type == PCI_EXP_TYPE_ROOT_PORT ||
+ parent->pcie_type == PCI_EXP_TYPE_DOWNSTREAM)
+ return 1;
+ return 0;
+}
+
/**
* pci_scan_slot - scan a PCI slot on a bus for devices.
* @bus: PCI bus to scan
@@ -1094,21 +1321,30 @@ EXPORT_SYMBOL(pci_scan_single_device);
*/
int pci_scan_slot(struct pci_bus *bus, int devfn)
{
- int fn, nr = 0;
+ unsigned fn, nr = 0;
struct pci_dev *dev;
+ unsigned (*next_fn)(struct pci_dev *, unsigned) = no_next_fn;
+
+ if (only_one_child(bus) && (devfn > 0))
+ return 0; /* Already scanned the entire slot */
dev = pci_scan_single_device(bus, devfn);
- if (dev && !dev->is_added) /* new device? */
+ if (!dev)
+ return 0;
+ if (!dev->is_added)
nr++;
- if (dev && dev->multifunction) {
- for (fn = 1; fn < 8; fn++) {
- dev = pci_scan_single_device(bus, devfn + fn);
- if (dev) {
- if (!dev->is_added)
- nr++;
- dev->multifunction = 1;
- }
+ if (pci_ari_enabled(bus))
+ next_fn = next_ari_fn;
+ else if (dev->multifunction)
+ next_fn = next_trad_fn;
+
+ for (fn = next_fn(dev, 0); fn > 0; fn = next_fn(dev, fn)) {
+ dev = pci_scan_single_device(bus, devfn + fn);
+ if (dev) {
+ if (!dev->is_added)
+ nr++;
+ dev->multifunction = 1;
}
}
@@ -1200,6 +1436,7 @@ struct pci_bus * pci_create_bus(struct device *parent,
if (error)
goto dev_reg_err;
b->bridge = get_device(dev);
+ device_enable_async_suspend(b->bridge);
if (!parent)
set_dev_node(b->bridge, pcibus_to_node(b));
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 456c265b1fe9..039e87b71442 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -25,14 +25,9 @@
#include <linux/dmi.h>
#include <linux/pci-aspm.h>
#include <linux/ioport.h>
+#include <asm/dma.h> /* isa_dma_bridge_buggy */
#include "pci.h"
-int isa_dma_bridge_buggy;
-EXPORT_SYMBOL(isa_dma_bridge_buggy);
-int pci_pci_problems;
-EXPORT_SYMBOL(pci_pci_problems);
-
-#ifdef CONFIG_PCI_QUIRKS
/*
* This quirk function disables memory decoding and releases memory resources
* of the device specified by kernel's boot parameter 'pci=resource_alignment='.
@@ -2613,6 +2608,7 @@ void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev)
}
pci_do_fixups(dev, start, end);
}
+EXPORT_SYMBOL(pci_fixup_device);
static int __init pci_apply_final_quirks(void)
{
@@ -2724,9 +2720,3 @@ int pci_dev_specific_reset(struct pci_dev *dev, int probe)
return -ENOTTY;
}
-
-#else
-void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) {}
-int pci_dev_specific_reset(struct pci_dev *dev, int probe) { return -ENOTTY; }
-#endif
-EXPORT_SYMBOL(pci_fixup_device);
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index c48cd377b3f5..bf32f07c4efb 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -27,37 +27,83 @@
#include <linux/slab.h>
#include "pci.h"
-static void pbus_assign_resources_sorted(const struct pci_bus *bus)
-{
- struct pci_dev *dev;
+struct resource_list_x {
+ struct resource_list_x *next;
struct resource *res;
- struct resource_list head, *list, *tmp;
- int idx;
+ struct pci_dev *dev;
+ resource_size_t start;
+ resource_size_t end;
+ unsigned long flags;
+};
- head.next = NULL;
- list_for_each_entry(dev, &bus->devices, bus_list) {
- u16 class = dev->class >> 8;
+static void add_to_failed_list(struct resource_list_x *head,
+ struct pci_dev *dev, struct resource *res)
+{
+ struct resource_list_x *list = head;
+ struct resource_list_x *ln = list->next;
+ struct resource_list_x *tmp;
- /* Don't touch classless devices or host bridges or ioapics. */
- if (class == PCI_CLASS_NOT_DEFINED ||
- class == PCI_CLASS_BRIDGE_HOST)
- continue;
+ tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
+ if (!tmp) {
+ pr_warning("add_to_failed_list: kmalloc() failed!\n");
+ return;
+ }
- /* Don't touch ioapic devices already enabled by firmware */
- if (class == PCI_CLASS_SYSTEM_PIC) {
- u16 command;
- pci_read_config_word(dev, PCI_COMMAND, &command);
- if (command & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY))
- continue;
- }
+ tmp->next = ln;
+ tmp->res = res;
+ tmp->dev = dev;
+ tmp->start = res->start;
+ tmp->end = res->end;
+ tmp->flags = res->flags;
+ list->next = tmp;
+}
+
+static void free_failed_list(struct resource_list_x *head)
+{
+ struct resource_list_x *list, *tmp;
- pdev_sort_resources(dev, &head);
+ for (list = head->next; list;) {
+ tmp = list;
+ list = list->next;
+ kfree(tmp);
}
- for (list = head.next; list;) {
+ head->next = NULL;
+}
+
+static void __dev_sort_resources(struct pci_dev *dev,
+ struct resource_list *head)
+{
+ u16 class = dev->class >> 8;
+
+ /* Don't touch classless devices or host bridges or ioapics. */
+ if (class == PCI_CLASS_NOT_DEFINED || class == PCI_CLASS_BRIDGE_HOST)
+ return;
+
+ /* Don't touch ioapic devices already enabled by firmware */
+ if (class == PCI_CLASS_SYSTEM_PIC) {
+ u16 command;
+ pci_read_config_word(dev, PCI_COMMAND, &command);
+ if (command & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY))
+ return;
+ }
+
+ pdev_sort_resources(dev, head);
+}
+
+static void __assign_resources_sorted(struct resource_list *head,
+ struct resource_list_x *fail_head)
+{
+ struct resource *res;
+ struct resource_list *list, *tmp;
+ int idx;
+
+ for (list = head->next; list;) {
res = list->res;
idx = res - &list->dev->resource[0];
if (pci_assign_resource(list->dev, idx)) {
+ if (fail_head && !pci_is_root_bus(list->dev->bus))
+ add_to_failed_list(fail_head, list->dev, res);
res->start = 0;
res->end = 0;
res->flags = 0;
@@ -68,6 +114,30 @@ static void pbus_assign_resources_sorted(const struct pci_bus *bus)
}
}
+static void pdev_assign_resources_sorted(struct pci_dev *dev,
+ struct resource_list_x *fail_head)
+{
+ struct resource_list head;
+
+ head.next = NULL;
+ __dev_sort_resources(dev, &head);
+ __assign_resources_sorted(&head, fail_head);
+
+}
+
+static void pbus_assign_resources_sorted(const struct pci_bus *bus,
+ struct resource_list_x *fail_head)
+{
+ struct pci_dev *dev;
+ struct resource_list head;
+
+ head.next = NULL;
+ list_for_each_entry(dev, &bus->devices, bus_list)
+ __dev_sort_resources(dev, &head);
+
+ __assign_resources_sorted(&head, fail_head);
+}
+
void pci_setup_cardbus(struct pci_bus *bus)
{
struct pci_dev *bridge = bus->self;
@@ -134,18 +204,12 @@ EXPORT_SYMBOL(pci_setup_cardbus);
config space writes, so it's quite possible that an I/O window of
the bridge will have some undesirable address (e.g. 0) after the
first write. Ditto 64-bit prefetchable MMIO. */
-static void pci_setup_bridge(struct pci_bus *bus)
+static void pci_setup_bridge_io(struct pci_bus *bus)
{
struct pci_dev *bridge = bus->self;
struct resource *res;
struct pci_bus_region region;
- u32 l, bu, lu, io_upper16;
-
- if (pci_is_enabled(bridge))
- return;
-
- dev_info(&bridge->dev, "PCI bridge to [bus %02x-%02x]\n",
- bus->secondary, bus->subordinate);
+ u32 l, io_upper16;
/* Set up the top and bottom of the PCI I/O segment for this bus. */
res = bus->resource[0];
@@ -158,8 +222,7 @@ static void pci_setup_bridge(struct pci_bus *bus)
/* Set up upper 16 bits of I/O base/limit. */
io_upper16 = (region.end & 0xffff0000) | (region.start >> 16);
dev_info(&bridge->dev, " bridge window %pR\n", res);
- }
- else {
+ } else {
/* Clear upper 16 bits of I/O base/limit. */
io_upper16 = 0;
l = 0x00f0;
@@ -171,21 +234,35 @@ static void pci_setup_bridge(struct pci_bus *bus)
pci_write_config_dword(bridge, PCI_IO_BASE, l);
/* Update upper 16 bits of I/O base/limit. */
pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, io_upper16);
+}
- /* Set up the top and bottom of the PCI Memory segment
- for this bus. */
+static void pci_setup_bridge_mmio(struct pci_bus *bus)
+{
+ struct pci_dev *bridge = bus->self;
+ struct resource *res;
+ struct pci_bus_region region;
+ u32 l;
+
+ /* Set up the top and bottom of the PCI Memory segment for this bus. */
res = bus->resource[1];
pcibios_resource_to_bus(bridge, &region, res);
if (res->flags & IORESOURCE_MEM) {
l = (region.start >> 16) & 0xfff0;
l |= region.end & 0xfff00000;
dev_info(&bridge->dev, " bridge window %pR\n", res);
- }
- else {
+ } else {
l = 0x0000fff0;
dev_info(&bridge->dev, " bridge window [mem disabled]\n");
}
pci_write_config_dword(bridge, PCI_MEMORY_BASE, l);
+}
+
+static void pci_setup_bridge_mmio_pref(struct pci_bus *bus)
+{
+ struct pci_dev *bridge = bus->self;
+ struct resource *res;
+ struct pci_bus_region region;
+ u32 l, bu, lu;
/* Clear out the upper 32 bits of PREF limit.
If PCI_PREF_BASE_UPPER32 was non-zero, this temporarily
@@ -204,8 +281,7 @@ static void pci_setup_bridge(struct pci_bus *bus)
lu = upper_32_bits(region.end);
}
dev_info(&bridge->dev, " bridge window %pR\n", res);
- }
- else {
+ } else {
l = 0x0000fff0;
dev_info(&bridge->dev, " bridge window [mem pref disabled]\n");
}
@@ -214,10 +290,35 @@ static void pci_setup_bridge(struct pci_bus *bus)
/* Set the upper 32 bits of PREF base & limit. */
pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu);
pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu);
+}
+
+static void __pci_setup_bridge(struct pci_bus *bus, unsigned long type)
+{
+ struct pci_dev *bridge = bus->self;
+
+ dev_info(&bridge->dev, "PCI bridge to [bus %02x-%02x]\n",
+ bus->secondary, bus->subordinate);
+
+ if (type & IORESOURCE_IO)
+ pci_setup_bridge_io(bus);
+
+ if (type & IORESOURCE_MEM)
+ pci_setup_bridge_mmio(bus);
+
+ if (type & IORESOURCE_PREFETCH)
+ pci_setup_bridge_mmio_pref(bus);
pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, bus->bridge_ctl);
}
+static void pci_setup_bridge(struct pci_bus *bus)
+{
+ unsigned long type = IORESOURCE_IO | IORESOURCE_MEM |
+ IORESOURCE_PREFETCH;
+
+ __pci_setup_bridge(bus, type);
+}
+
/* Check whether the bridge supports optional I/O and
prefetchable memory ranges. If not, the respective
base/limit registers must be read-only and read as 0. */
@@ -253,8 +354,11 @@ static void pci_bridge_check_ranges(struct pci_bus *bus)
}
if (pmem) {
b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH;
- if ((pmem & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64)
+ if ((pmem & PCI_PREF_RANGE_TYPE_MASK) ==
+ PCI_PREF_RANGE_TYPE_64) {
b_res[2].flags |= IORESOURCE_MEM_64;
+ b_res[2].flags |= PCI_PREF_RANGE_TYPE_64;
+ }
}
/* double check if bridge does support 64 bit pref */
@@ -283,8 +387,7 @@ static struct resource *find_free_bus_resource(struct pci_bus *bus, unsigned lon
unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
IORESOURCE_PREFETCH;
- for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
- r = bus->resource[i];
+ pci_bus_for_each_resource(bus, r, i) {
if (r == &ioport_resource || r == &iomem_resource)
continue;
if (r && (r->flags & type_mask) == type && !r->parent)
@@ -301,7 +404,7 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size)
{
struct pci_dev *dev;
struct resource *b_res = find_free_bus_resource(bus, IORESOURCE_IO);
- unsigned long size = 0, size1 = 0;
+ unsigned long size = 0, size1 = 0, old_size;
if (!b_res)
return;
@@ -326,12 +429,17 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size)
}
if (size < min_size)
size = min_size;
+ old_size = resource_size(b_res);
+ if (old_size == 1)
+ old_size = 0;
/* To be fixed in 2.5: we should have sort of HAVE_ISA
flag in the struct pci_bus. */
#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
size = (size & 0xff) + ((size & ~0xffUL) << 2);
#endif
size = ALIGN(size + size1, 4096);
+ if (size < old_size)
+ size = old_size;
if (!size) {
if (b_res->start || b_res->end)
dev_info(&bus->self->dev, "disabling bridge window "
@@ -352,7 +460,7 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
unsigned long type, resource_size_t min_size)
{
struct pci_dev *dev;
- resource_size_t min_align, align, size;
+ resource_size_t min_align, align, size, old_size;
resource_size_t aligns[12]; /* Alignments from 1Mb to 2Gb */
int order, max_order;
struct resource *b_res = find_free_bus_resource(bus, type);
@@ -402,6 +510,11 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
}
if (size < min_size)
size = min_size;
+ old_size = resource_size(b_res);
+ if (old_size == 1)
+ old_size = 0;
+ if (size < old_size)
+ size = old_size;
align = 0;
min_align = 0;
@@ -538,23 +651,25 @@ void __ref pci_bus_size_bridges(struct pci_bus *bus)
}
EXPORT_SYMBOL(pci_bus_size_bridges);
-void __ref pci_bus_assign_resources(const struct pci_bus *bus)
+static void __ref __pci_bus_assign_resources(const struct pci_bus *bus,
+ struct resource_list_x *fail_head)
{
struct pci_bus *b;
struct pci_dev *dev;
- pbus_assign_resources_sorted(bus);
+ pbus_assign_resources_sorted(bus, fail_head);
list_for_each_entry(dev, &bus->devices, bus_list) {
b = dev->subordinate;
if (!b)
continue;
- pci_bus_assign_resources(b);
+ __pci_bus_assign_resources(b, fail_head);
switch (dev->class >> 8) {
case PCI_CLASS_BRIDGE_PCI:
- pci_setup_bridge(b);
+ if (!pci_is_enabled(dev))
+ pci_setup_bridge(b);
break;
case PCI_CLASS_BRIDGE_CARDBUS:
@@ -568,15 +683,130 @@ void __ref pci_bus_assign_resources(const struct pci_bus *bus)
}
}
}
+
+void __ref pci_bus_assign_resources(const struct pci_bus *bus)
+{
+ __pci_bus_assign_resources(bus, NULL);
+}
EXPORT_SYMBOL(pci_bus_assign_resources);
+static void __ref __pci_bridge_assign_resources(const struct pci_dev *bridge,
+ struct resource_list_x *fail_head)
+{
+ struct pci_bus *b;
+
+ pdev_assign_resources_sorted((struct pci_dev *)bridge, fail_head);
+
+ b = bridge->subordinate;
+ if (!b)
+ return;
+
+ __pci_bus_assign_resources(b, fail_head);
+
+ switch (bridge->class >> 8) {
+ case PCI_CLASS_BRIDGE_PCI:
+ pci_setup_bridge(b);
+ break;
+
+ case PCI_CLASS_BRIDGE_CARDBUS:
+ pci_setup_cardbus(b);
+ break;
+
+ default:
+ dev_info(&bridge->dev, "not setting up bridge for bus "
+ "%04x:%02x\n", pci_domain_nr(b), b->number);
+ break;
+ }
+}
+static void pci_bridge_release_resources(struct pci_bus *bus,
+ unsigned long type)
+{
+ int idx;
+ bool changed = false;
+ struct pci_dev *dev;
+ struct resource *r;
+ unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
+ IORESOURCE_PREFETCH;
+
+ dev = bus->self;
+ for (idx = PCI_BRIDGE_RESOURCES; idx <= PCI_BRIDGE_RESOURCE_END;
+ idx++) {
+ r = &dev->resource[idx];
+ if ((r->flags & type_mask) != type)
+ continue;
+ if (!r->parent)
+ continue;
+ /*
+ * if there are children under that, we should release them
+ * all
+ */
+ release_child_resources(r);
+ if (!release_resource(r)) {
+ dev_printk(KERN_DEBUG, &dev->dev,
+ "resource %d %pR released\n", idx, r);
+ /* keep the old size */
+ r->end = resource_size(r) - 1;
+ r->start = 0;
+ r->flags = 0;
+ changed = true;
+ }
+ }
+
+ if (changed) {
+ /* avoiding touch the one without PREF */
+ if (type & IORESOURCE_PREFETCH)
+ type = IORESOURCE_PREFETCH;
+ __pci_setup_bridge(bus, type);
+ }
+}
+
+enum release_type {
+ leaf_only,
+ whole_subtree,
+};
+/*
+ * try to release pci bridge resources that is from leaf bridge,
+ * so we can allocate big new one later
+ */
+static void __ref pci_bus_release_bridge_resources(struct pci_bus *bus,
+ unsigned long type,
+ enum release_type rel_type)
+{
+ struct pci_dev *dev;
+ bool is_leaf_bridge = true;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ struct pci_bus *b = dev->subordinate;
+ if (!b)
+ continue;
+
+ is_leaf_bridge = false;
+
+ if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
+ continue;
+
+ if (rel_type == whole_subtree)
+ pci_bus_release_bridge_resources(b, type,
+ whole_subtree);
+ }
+
+ if (pci_is_root_bus(bus))
+ return;
+
+ if ((bus->self->class >> 8) != PCI_CLASS_BRIDGE_PCI)
+ return;
+
+ if ((rel_type == whole_subtree) || is_leaf_bridge)
+ pci_bridge_release_resources(bus, type);
+}
+
static void pci_bus_dump_res(struct pci_bus *bus)
{
- int i;
+ struct resource *res;
+ int i;
- for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
- struct resource *res = bus->resource[i];
- if (!res || !res->end)
+ pci_bus_for_each_resource(bus, res, i) {
+ if (!res || !res->end || !res->flags)
continue;
dev_printk(KERN_DEBUG, &bus->dev, "resource %d %pR\n", i, res);
@@ -600,11 +830,65 @@ static void pci_bus_dump_resources(struct pci_bus *bus)
}
}
+static int __init pci_bus_get_depth(struct pci_bus *bus)
+{
+ int depth = 0;
+ struct pci_dev *dev;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ int ret;
+ struct pci_bus *b = dev->subordinate;
+ if (!b)
+ continue;
+
+ ret = pci_bus_get_depth(b);
+ if (ret + 1 > depth)
+ depth = ret + 1;
+ }
+
+ return depth;
+}
+static int __init pci_get_max_depth(void)
+{
+ int depth = 0;
+ struct pci_bus *bus;
+
+ list_for_each_entry(bus, &pci_root_buses, node) {
+ int ret;
+
+ ret = pci_bus_get_depth(bus);
+ if (ret > depth)
+ depth = ret;
+ }
+
+ return depth;
+}
+
+/*
+ * first try will not touch pci bridge res
+ * second and later try will clear small leaf bridge res
+ * will stop till to the max deepth if can not find good one
+ */
void __init
pci_assign_unassigned_resources(void)
{
struct pci_bus *bus;
+ int tried_times = 0;
+ enum release_type rel_type = leaf_only;
+ struct resource_list_x head, *list;
+ unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
+ IORESOURCE_PREFETCH;
+ unsigned long failed_type;
+ int max_depth = pci_get_max_depth();
+ int pci_try_num;
+ head.next = NULL;
+
+ pci_try_num = max_depth + 1;
+ printk(KERN_DEBUG "PCI: max bus depth: %d pci_try_num: %d\n",
+ max_depth, pci_try_num);
+
+again:
/* Depth first, calculate sizes and alignments of all
subordinate buses. */
list_for_each_entry(bus, &pci_root_buses, node) {
@@ -612,12 +896,130 @@ pci_assign_unassigned_resources(void)
}
/* Depth last, allocate resources and update the hardware. */
list_for_each_entry(bus, &pci_root_buses, node) {
- pci_bus_assign_resources(bus);
- pci_enable_bridges(bus);
+ __pci_bus_assign_resources(bus, &head);
}
+ tried_times++;
+
+ /* any device complain? */
+ if (!head.next)
+ goto enable_and_dump;
+ failed_type = 0;
+ for (list = head.next; list;) {
+ failed_type |= list->flags;
+ list = list->next;
+ }
+ /*
+ * io port are tight, don't try extra
+ * or if reach the limit, don't want to try more
+ */
+ failed_type &= type_mask;
+ if ((failed_type == IORESOURCE_IO) || (tried_times >= pci_try_num)) {
+ free_failed_list(&head);
+ goto enable_and_dump;
+ }
+
+ printk(KERN_DEBUG "PCI: No. %d try to assign unassigned res\n",
+ tried_times + 1);
+
+ /* third times and later will not check if it is leaf */
+ if ((tried_times + 1) > 2)
+ rel_type = whole_subtree;
+
+ /*
+ * Try to release leaf bridge's resources that doesn't fit resource of
+ * child device under that bridge
+ */
+ for (list = head.next; list;) {
+ bus = list->dev->bus;
+ pci_bus_release_bridge_resources(bus, list->flags & type_mask,
+ rel_type);
+ list = list->next;
+ }
+ /* restore size and flags */
+ for (list = head.next; list;) {
+ struct resource *res = list->res;
+
+ res->start = list->start;
+ res->end = list->end;
+ res->flags = list->flags;
+ if (list->dev->subordinate)
+ res->flags = 0;
+
+ list = list->next;
+ }
+ free_failed_list(&head);
+
+ goto again;
+
+enable_and_dump:
+ /* Depth last, update the hardware. */
+ list_for_each_entry(bus, &pci_root_buses, node)
+ pci_enable_bridges(bus);
/* dump the resource on buses */
list_for_each_entry(bus, &pci_root_buses, node) {
pci_bus_dump_resources(bus);
}
}
+
+void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
+{
+ struct pci_bus *parent = bridge->subordinate;
+ int tried_times = 0;
+ struct resource_list_x head, *list;
+ int retval;
+ unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
+ IORESOURCE_PREFETCH;
+
+ head.next = NULL;
+
+again:
+ pci_bus_size_bridges(parent);
+ __pci_bridge_assign_resources(bridge, &head);
+ retval = pci_reenable_device(bridge);
+ pci_set_master(bridge);
+ pci_enable_bridges(parent);
+
+ tried_times++;
+
+ if (!head.next)
+ return;
+
+ if (tried_times >= 2) {
+ /* still fail, don't need to try more */
+ free_failed_list(&head);
+ return;
+ }
+
+ printk(KERN_DEBUG "PCI: No. %d try to assign unassigned res\n",
+ tried_times + 1);
+
+ /*
+ * Try to release leaf bridge's resources that doesn't fit resource of
+ * child device under that bridge
+ */
+ for (list = head.next; list;) {
+ struct pci_bus *bus = list->dev->bus;
+ unsigned long flags = list->flags;
+
+ pci_bus_release_bridge_resources(bus, flags & type_mask,
+ whole_subtree);
+ list = list->next;
+ }
+ /* restore size and flags */
+ for (list = head.next; list;) {
+ struct resource *res = list->res;
+
+ res->start = list->start;
+ res->end = list->end;
+ res->flags = list->flags;
+ if (list->dev->subordinate)
+ res->flags = 0;
+
+ list = list->next;
+ }
+ free_failed_list(&head);
+
+ goto again;
+}
+EXPORT_SYMBOL_GPL(pci_assign_unassigned_bridge_resources);
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index 8c02b6c53bdb..49c9e6c9779a 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -47,6 +47,55 @@ static ssize_t address_read_file(struct pci_slot *slot, char *buf)
slot->number);
}
+/* these strings match up with the values in pci_bus_speed */
+static char *pci_bus_speed_strings[] = {
+ "33 MHz PCI", /* 0x00 */
+ "66 MHz PCI", /* 0x01 */
+ "66 MHz PCI-X", /* 0x02 */
+ "100 MHz PCI-X", /* 0x03 */
+ "133 MHz PCI-X", /* 0x04 */
+ NULL, /* 0x05 */
+ NULL, /* 0x06 */
+ NULL, /* 0x07 */
+ NULL, /* 0x08 */
+ "66 MHz PCI-X 266", /* 0x09 */
+ "100 MHz PCI-X 266", /* 0x0a */
+ "133 MHz PCI-X 266", /* 0x0b */
+ "Unknown AGP", /* 0x0c */
+ "1x AGP", /* 0x0d */
+ "2x AGP", /* 0x0e */
+ "4x AGP", /* 0x0f */
+ "8x AGP", /* 0x10 */
+ "66 MHz PCI-X 533", /* 0x11 */
+ "100 MHz PCI-X 533", /* 0x12 */
+ "133 MHz PCI-X 533", /* 0x13 */
+ "2.5 GT/s PCIe", /* 0x14 */
+ "5.0 GT/s PCIe", /* 0x15 */
+ "8.0 GT/s PCIe", /* 0x16 */
+};
+
+static ssize_t bus_speed_read(enum pci_bus_speed speed, char *buf)
+{
+ const char *speed_string;
+
+ if (speed < ARRAY_SIZE(pci_bus_speed_strings))
+ speed_string = pci_bus_speed_strings[speed];
+ else
+ speed_string = "Unknown";
+
+ return sprintf(buf, "%s\n", speed_string);
+}
+
+static ssize_t max_speed_read_file(struct pci_slot *slot, char *buf)
+{
+ return bus_speed_read(slot->bus->max_bus_speed, buf);
+}
+
+static ssize_t cur_speed_read_file(struct pci_slot *slot, char *buf)
+{
+ return bus_speed_read(slot->bus->cur_bus_speed, buf);
+}
+
static void pci_slot_release(struct kobject *kobj)
{
struct pci_dev *dev;
@@ -66,9 +115,15 @@ static void pci_slot_release(struct kobject *kobj)
static struct pci_slot_attribute pci_slot_attr_address =
__ATTR(address, (S_IFREG | S_IRUGO), address_read_file, NULL);
+static struct pci_slot_attribute pci_slot_attr_max_speed =
+ __ATTR(max_bus_speed, (S_IFREG | S_IRUGO), max_speed_read_file, NULL);
+static struct pci_slot_attribute pci_slot_attr_cur_speed =
+ __ATTR(cur_bus_speed, (S_IFREG | S_IRUGO), cur_speed_read_file, NULL);
static struct attribute *pci_slot_default_attrs[] = {
&pci_slot_attr_address.attr,
+ &pci_slot_attr_max_speed.attr,
+ &pci_slot_attr_cur_speed.attr,
NULL,
};