diff options
Diffstat (limited to 'drivers/pci/probe.c')
| -rw-r--r-- | drivers/pci/probe.c | 167 |
1 files changed, 162 insertions, 5 deletions
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 4170113cde61..5ed99309c758 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -6,6 +6,7 @@ #include <linux/delay.h> #include <linux/init.h> #include <linux/pci.h> +#include <linux/pci_hotplug.h> #include <linux/slab.h> #include <linux/module.h> #include <linux/cpumask.h> @@ -485,7 +486,7 @@ void pci_read_bridge_bases(struct pci_bus *child) } } -static struct pci_bus *pci_alloc_bus(void) +static struct pci_bus *pci_alloc_bus(struct pci_bus *parent) { struct pci_bus *b; @@ -500,6 +501,10 @@ static struct pci_bus *pci_alloc_bus(void) INIT_LIST_HEAD(&b->resources); b->max_bus_speed = PCI_SPEED_UNKNOWN; b->cur_bus_speed = PCI_SPEED_UNKNOWN; +#ifdef CONFIG_PCI_DOMAINS_GENERIC + if (parent) + b->domain_nr = parent->domain_nr; +#endif return b; } @@ -671,7 +676,7 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent, /* * Allocate a new bus, and inherit stuff from the parent.. */ - child = pci_alloc_bus(); + child = pci_alloc_bus(parent); if (!child) return NULL; @@ -740,6 +745,17 @@ struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, } EXPORT_SYMBOL(pci_add_new_bus); +static void pci_enable_crs(struct pci_dev *pdev) +{ + u16 root_cap = 0; + + /* Enable CRS Software Visibility if supported */ + pcie_capability_read_word(pdev, PCI_EXP_RTCAP, &root_cap); + if (root_cap & PCI_EXP_RTCAP_CRSVIS) + pcie_capability_set_word(pdev, PCI_EXP_RTCTL, + PCI_EXP_RTCTL_CRSSVE); +} + /* * If it's a bridge, configure it and scan the bus behind it. * For CardBus bridges, we don't scan behind as the devices will @@ -787,6 +803,8 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass) pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT); + pci_enable_crs(dev); + if ((secondary || subordinate) && !pcibios_assign_all_busses() && !is_cardbus && !broken) { unsigned int cmax; @@ -1226,6 +1244,137 @@ int pci_setup_device(struct pci_dev *dev) return 0; } +static struct hpp_type0 pci_default_type0 = { + .revision = 1, + .cache_line_size = 8, + .latency_timer = 0x40, + .enable_serr = 0, + .enable_perr = 0, +}; + +static void program_hpp_type0(struct pci_dev *dev, struct hpp_type0 *hpp) +{ + u16 pci_cmd, pci_bctl; + + if (!hpp) + hpp = &pci_default_type0; + + if (hpp->revision > 1) { + dev_warn(&dev->dev, + "PCI settings rev %d not supported; using defaults\n", + hpp->revision); + hpp = &pci_default_type0; + } + + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpp->cache_line_size); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp->latency_timer); + pci_read_config_word(dev, PCI_COMMAND, &pci_cmd); + if (hpp->enable_serr) + pci_cmd |= PCI_COMMAND_SERR; + if (hpp->enable_perr) + pci_cmd |= PCI_COMMAND_PARITY; + pci_write_config_word(dev, PCI_COMMAND, pci_cmd); + + /* Program bridge control value */ + if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { + pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, + hpp->latency_timer); + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl); + if (hpp->enable_serr) + pci_bctl |= PCI_BRIDGE_CTL_SERR; + if (hpp->enable_perr) + pci_bctl |= PCI_BRIDGE_CTL_PARITY; + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl); + } +} + +static void program_hpp_type1(struct pci_dev *dev, struct hpp_type1 *hpp) +{ + if (hpp) + dev_warn(&dev->dev, "PCI-X settings not supported\n"); +} + +static void program_hpp_type2(struct pci_dev *dev, struct hpp_type2 *hpp) +{ + int pos; + u32 reg32; + + if (!hpp) + return; + + if (hpp->revision > 1) { + dev_warn(&dev->dev, "PCIe settings rev %d not supported\n", + hpp->revision); + return; + } + + /* + * Don't allow _HPX to change MPS or MRRS settings. We manage + * those to make sure they're consistent with the rest of the + * platform. + */ + hpp->pci_exp_devctl_and |= PCI_EXP_DEVCTL_PAYLOAD | + PCI_EXP_DEVCTL_READRQ; + hpp->pci_exp_devctl_or &= ~(PCI_EXP_DEVCTL_PAYLOAD | + PCI_EXP_DEVCTL_READRQ); + + /* Initialize Device Control Register */ + pcie_capability_clear_and_set_word(dev, PCI_EXP_DEVCTL, + ~hpp->pci_exp_devctl_and, hpp->pci_exp_devctl_or); + + /* Initialize Link Control Register */ + if (dev->subordinate) + pcie_capability_clear_and_set_word(dev, PCI_EXP_LNKCTL, + ~hpp->pci_exp_lnkctl_and, hpp->pci_exp_lnkctl_or); + + /* Find Advanced Error Reporting Enhanced Capability */ + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); + if (!pos) + return; + + /* Initialize Uncorrectable Error Mask Register */ + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, ®32); + reg32 = (reg32 & hpp->unc_err_mask_and) | hpp->unc_err_mask_or; + pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, reg32); + + /* Initialize Uncorrectable Error Severity Register */ + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, ®32); + reg32 = (reg32 & hpp->unc_err_sever_and) | hpp->unc_err_sever_or; + pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, reg32); + + /* Initialize Correctable Error Mask Register */ + pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, ®32); + reg32 = (reg32 & hpp->cor_err_mask_and) | hpp->cor_err_mask_or; + pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg32); + + /* Initialize Advanced Error Capabilities and Control Register */ + pci_read_config_dword(dev, pos + PCI_ERR_CAP, ®32); + reg32 = (reg32 & hpp->adv_err_cap_and) | hpp->adv_err_cap_or; + pci_write_config_dword(dev, pos + PCI_ERR_CAP, reg32); + + /* + * FIXME: The following two registers are not supported yet. + * + * o Secondary Uncorrectable Error Severity Register + * o Secondary Uncorrectable Error Mask Register + */ +} + +static void pci_configure_device(struct pci_dev *dev) +{ + struct hotplug_params hpp; + int ret; + + memset(&hpp, 0, sizeof(hpp)); + ret = pci_get_hp_params(dev, &hpp); + if (ret) + return; + + program_hpp_type2(dev, hpp.t2); + program_hpp_type1(dev, hpp.t1); + program_hpp_type0(dev, hpp.t0); +} + static void pci_release_capabilities(struct pci_dev *dev) { pci_vpd_release(dev); @@ -1282,8 +1431,13 @@ bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l, *l == 0x0000ffff || *l == 0xffff0000) return false; - /* Configuration request Retry Status */ - while (*l == 0xffff0001) { + /* + * Configuration Request Retry Status. Some root ports return the + * actual device ID instead of the synthetic ID (0xFFFF) required + * by the PCIe spec. Ignore the device ID and only check for + * (vendor id == 1). + */ + while ((*l & 0xffff) == 0x0001) { if (!crs_timeout) return false; @@ -1363,6 +1517,8 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus) { int ret; + pci_configure_device(dev); + device_initialize(&dev->dev); dev->dev.release = pci_release_dev; @@ -1751,13 +1907,14 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus, char bus_addr[64]; char *fmt; - b = pci_alloc_bus(); + b = pci_alloc_bus(NULL); if (!b) return NULL; b->sysdata = sysdata; b->ops = ops; b->number = b->busn_res.start = bus; + pci_bus_assign_domain_nr(b, parent); b2 = pci_find_bus(pci_domain_nr(b), bus); if (b2) { /* If we already got to this bus through a different bridge, ignore it */ |