diff options
Diffstat (limited to 'drivers/pci/pci.c')
| -rw-r--r-- | drivers/pci/pci.c | 29 |
1 files changed, 19 insertions, 10 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 24d86bd1bba1..9839d6f9bcb5 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1004,15 +1004,10 @@ static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state) if (state == PCI_D0) { pci_platform_power_transition(dev, PCI_D0); /* - * Mandatory power management transition delays, see - * PCI Express Base Specification Revision 2.0 Section - * 6.6.1: Conventional Reset. Do not delay for - * devices powered on/off by corresponding bridge, - * because have already delayed for the bridge. + * Mandatory power management transition delays are + * handled in the PCIe portdrv resume hooks. */ if (dev->runtime_d3cold) { - if (dev->d3cold_delay && !dev->imm_ready) - msleep(dev->d3cold_delay); /* * When powering on a bridge from D3cold, the * whole hierarchy may be powered on into @@ -4579,14 +4574,16 @@ static int pci_pm_reset(struct pci_dev *dev, int probe) return pci_dev_wait(dev, "PM D3->D0", PCIE_RESET_READY_POLL_MS); } + /** - * pcie_wait_for_link - Wait until link is active or inactive + * pcie_wait_for_link_delay - Wait until link is active or inactive * @pdev: Bridge device * @active: waiting for active or inactive? + * @delay: Delay to wait after link has become active (in ms) * * Use this to wait till link becomes active or inactive. */ -bool pcie_wait_for_link(struct pci_dev *pdev, bool active) +bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active, int delay) { int timeout = 1000; bool ret; @@ -4623,13 +4620,25 @@ bool pcie_wait_for_link(struct pci_dev *pdev, bool active) timeout -= 10; } if (active && ret) - msleep(100); + msleep(delay); else if (ret != active) pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n", active ? "set" : "cleared"); return ret == active; } +/** + * pcie_wait_for_link - Wait until link is active or inactive + * @pdev: Bridge device + * @active: waiting for active or inactive? + * + * Use this to wait till link becomes active or inactive. + */ +bool pcie_wait_for_link(struct pci_dev *pdev, bool active) +{ + return pcie_wait_for_link_delay(pdev, active, 100); +} + void pci_reset_secondary_bus(struct pci_dev *dev) { u16 ctrl; |